DATASHEET Common-mode Chokes RN series Current-compensated Chokes Rated currents from 0.3 to 10 A Approvals DC to 400 Hz frequency 100 kHz to 3 MHz common-mode resonance frequency Dual-choke configurations Multiple PCB-mounting options RN chokes are attenuating common-mode or asymmetric (P/N –> E) interference signals, by being connected in series with the phase and neutral lines Performance indicators of an AC powerline input. Symmetrical components of the noise are also attenuated by the leakage inductance (stray inductance) of the windings. These chokes are typically used in conjunction with suppression capacitors. Features and benefits High saturation resistance and excellent thermal behavior Through hole pin connections Dual-choke configuration Technical specifications Small compact design Multiple housing options Operating voltage 300 VAC Custom-specific versions are available on request Operating frequency DC to 400 Hz Higher temperature versions Rated currents 0.3 to 10 A @ rated ambient temperature Fully potted design usable for ruggedized Rated inductance 0.4 to 100 mH applications Stray inductance Typically 1% of LN Inductance reduction (DC bias with IN) Less than 10% (25°C) Typical applications High potential test voltage winding-to- 1500 VAC, 60 sec, guaranteed winding @ 25°C 1500 VAC, 2 sec, factory test Switch-mode power applications winding-to-housing @ 25°C 4000 VAC, 60 sec, guaranteed Suppressing common-mode interference levels MTBF @ 40°C/230 V (Mil-HB-217F) >5,000,000 hours EMI input filters Surge current @ 10 msec 20 x IN@ 25°C For suppression-equipment with no earth Temperature range (operation and storage) -40°C to 100°C (40/100/56) connection acc. IEC 60068-1 Phase-angle control circuits in combination with Flammability corresponding to Potting compound UL 94V-0 Housing UL 94V-0 saturating chokes Ringcore coating UL 94V-0 Design corresponding to UL 1283, IEC/EN 60938-1 Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Choke selection table Filter Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN 102-0.3-02-22M 0.3 40 22.0 1300 10.0 10.0 9.0 4 RN 102-0.3-02-12M 0.3 40 12.0 1100 10.0 10.0 9.0 3 RN 102-0.6-02-4M4 0.6 40 4.4 380 10.0 10.0 9.0 3 RN 102-1-02-3M0 1.0 40 3.0 210 10.0 10.0 9.0 3 RN 102-1.5-02-1M6 1.5 40 1.6 94 10.0 10.0 9.0 3 RN 102-2-02-1M1 2.0 40 1.1 70 10.0 10.0 9.0 3 RN 112-0.4-02-39M 0.4 40 39.0 1500 15.0 10.0 12.6 6 RN 112-0.4-02-27M 0.4 40 27.0 1400 15.0 10.0 12.6 6 RN 112-0.5-02-27M 0.5 40 27.0 1200 15.0 10.0 12.6 6 RN 112-0.5-02-18M 0.5 40 18.0 1100 15.0 10.0 12.6 6 RN 112-0.5-02-15M 0.5 40 15.0 700 15.0 10.0 12.6 6 RN 112-0.6-02-15M 0.6 40 15.0 490 15.0 10.0 12.6 6 RN 112-0.8-02-10M 0.8 40 10.0 380 15.0 10.0 12.6 6 RN 112-1.2-02-6M8 1.2 40 6.8 250 15.0 10.0 12.6 6 RN 112-1.5-02-3M3 1.5 40 3.3 102 15.0 10.0 12.6 6 RN 112-2-02-1M8 2.0 40 1.8 74 15.0 10.0 12.6 6 RN 112-2-02-1M0 2.0 40 1.0 70 15.0 10.0 12.6 6 RN 112-2.6-02-0M4 2.6 40 0.4 40 15.0 10.0 12.6 6 RN 112-3.6-02-0M4 3.6 40 0.4 27 15.0 10.0 12.6 6 RN 112-4-02-0M7 4.0 40 0.7 24 15.0 10.0 12.6 6 RN 114-0.3-02-47M 0.3 40 47.0 1700 20.1 12.5 13.2 10 RN 114-0.5-02-39M 0.5 40 39.0 830 20.1 12.5 13.2 11 RN 114-0.8-02-27M 0.8 40 27.0 500 20.1 12.5 13.2 11 RN 114-1-02-15M 1.0 40 15.0 370 20.1 12.5 13.2 10 RN 114-1.2-02-10M 1.2 40 10.0 195 20.1 12.5 13.2 10 RN 114-1.5-02-6M8 1.5 40 6.8 123 20.1 12.5 13.2 11 RN 114-2-02-4M2 2.0 40 4.2 100 20.1 12.5 13.2 11 RN 114-2.5-02-3M3 2.5 40 3.3 72 20.1 12.5 13.2 11 RN 114-3-02-2M0 3.0 40 2.0 52 20.1 12.5 13.2 10 RN 114-4-02-1M5 4.0 40 1.5 34 20.1 12.5 13.2 11 RN 116-0.5-02-47M 0.5 60 47.0 960 20.1 12.5 13.2 11 RN 116-0.5-02-39M 0.5 60 39.0 920 20.1 12.5 13.2 11 RN 116-0.5-02-27M 0.5 60 27.0 790 20.1 12.5 13.2 11 RN 116-0.8-02-27M 0.8 60 27.0 370 20.1 12.5 13.2 13 RN 116-1-02-15M 1.0 60 15.0 260 20.1 12.5 13.2 12 RN 116-1-02-10M 1.0 60 10.0 210 20.1 12.5 13.2 11 RN 116-1.3-02-6M8 1.3 60 6.8 140 20.1 12.5 13.2 12 RN 116-1.5-02-10M 1.5 60 10.0 148 20.1 12.5 13.2 12 RN 116-1.7-02-4M0 1.7 60 4.0 87 20.1 12.5 13.2 12 RN 116-2-02-3M3 2.0 60 3.3 70 20.1 12.5 13.2 12 RN 116-2-02-2M2 2.0 60 2.2 66 20.1 12.5 13.2 11 RN 122-0.5-02-56M 0.5 40 56.0 1800 25.0 15.0 16.5 20 RN 122-0.6-02-47M 0.6 40 47.0 1300 25.0 15.0 16.5 20 RN 122-0.8-02-39M 0.8 40 39.0 1000 25.0 15.0 16.5 20 RN 122-1-02-18M 1.0 40 18.0 630 25.0 15.0 16.5 19 RN 122-1-02-10M 1.0 40 10.0 560 25.0 15.0 16.5 19 RN 122-1.5-02-10M 1.5 40 10.0 250 25.0 15.0 16.5 20 RN 122-2-02-6M8 2.0 40 6.8 156 25.0 15.0 16.5 20 RN 122-2-02-5M0 2.0 40 5.0 140 25.0 15.0 16.5 21 RN 122-2.5-02-5M6 2.5 40 5.6 110 25.0 15.0 16.5 20 RN 122-3-02-4M5 3.0 40 4.5 80 25.0 15.0 16.5 21 RN 122-4-02-3M3 4.0 40 3.3 46 25.0 15.0 16.5 22 RN 122-4-02-1M8 4.0 40 1.8 42 25.0 15.0 16.5 22

3 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Filter Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN 142-0.5-02-82M 0.5 40 82.0 2700 30.0 20.0 19.7 36 RN 142-1-02-33M 1.0 40 33.0 810 30.0 20.0 19.7 37 RN 142-1.4-02-27M 1.4 40 27.0 500 30.0 20.0 19.7 40 RN 142-2-02-6M8 2.0 40 6.8 192 30.0 20.0 19.7 36 RN 142-4-02-3M3 4.0 40 3.3 67 30.0 20.0 19.7 38 RN 142-6-02-1M8 6.0 40 1.8 20 30.0 20.0 19.7 40 RN 143-0.5-02-100M 0.5 40 100.0 2900 30.0 20.0 19.7 36 RN 143-1-02-47M 1.0 40 47.0 890 30.0 20.0 19.7 38 RN 143-2-02-10M 2.0 40 10.0 240 30.0 20.0 19.7 42 RN 143-4-02-3M9 4.0 40 3.9 59 30.0 20.0 19.7 39 RN 143-6-02-1M8 6.0 40 1.8 20 30.0 20.0 19.7 42 RN 152-1-02-68M 1.0 40 68.0 1300 40.0 15.0 25.0 75 RN 152-2-02-18M 2.0 40 18.0 350 40.0 15.0 25.0 64 RN 152-4-02-6M8 4.0 40 6.8 87 40.0 15.0 25.0 74 RN 152-6-02-3M9 6.0 40 3.9 42 40.0 15.0 25.0 68 RN 152-8-02-2M7 8.0 40 2.7 22 40.0 15.0 25.0 73 RN 152-10-02-1M8 10.0 40 1.8 14 40.0 15.0 25.0 73 RN 202-0.3-02-22M 0.3 40 22.0 1300 5.1 15.2 13.5 4 RN 202-0.3-02-12M 0.3 40 12.0 1100 5.1 15.2 13.5 4 RN 202-0.6-02-4M4 0.6 40 4.4 380 5.1 15.2 13.5 4 RN 202-1-02-3M0 1.0 40 3.0 210 5.1 15.2 13.5 4 RN 202-1.5-02-1M6 1.5 40 1.6 94 5.1 15.2 13.5 4 RN 202-2-02-1M1 2.0 40 1.1 70 5.1 15.2 13.5 4 RN 204-0.3-02-22M 0.3 40 22.0 1300 7.6 10.0 14.3 3 RN 204-0.3-02-12M 0.3 40 12.0 960 7.6 10.0 14.3 3 RN 204-0.6-02-4M4 0.6 40 4.4 350 7.6 10.0 14.3 3 RN 204-1-02-3M0 1.0 40 3.0 192 7.6 10.0 14.3 3 RN 204-1.5-02-1M6 1.5 40 1.6 96 7.6 10.0 14.3 3 RN 204-2-02-1M1 2.0 40 1.1 57 7.6 10.0 14.3 3 RN 212-0.4-02-39M 0.4 40 39.0 1500 10.0 15.0 20.0 8 RN 212-0.4-02-27M 0.4 40 27.0 1400 10.0 15.0 20.0 8 RN 212-0.5-02-27M 0.5 40 27.0 1200 10.0 15.0 20.0 8 RN 212-0.5-02-18M 0.5 40 18.0 1100 10.0 15.0 20.0 8 RN 212-0.5-02-15M 0.5 40 15.0 700 10.0 15.0 20.0 8 RN 212-0.6-02-15M 0.6 40 15.0 490 10.0 15.0 20.0 8 RN 212-0.8-02-10M 0.8 40 10.0 380 10.0 15.0 20.0 8 RN 212-1.2-02-6M8 1.2 40 6.8 250 10.0 15.0 20.0 8 RN 212-1.5-02-3M3 1.5 40 3.3 102 10.0 15.0 20.0 8 RN 212-2-02-1M8 2.0 40 1.8 74 10.0 15.0 20.0 8 RN 212-2-02-1M0 2.0 40 1.0 70 10.0 15.0 20.0 8 RN 212-2.6-02-0M4 2.6 40 0.4 40 10.0 15.0 20.0 8 RN 212-3.6-02-0M4 3.6 40 0.4 27 10.0 15.0 20.0 8 RN 212-4-02-0M7 4.0 40 0.7 24 10.0 15.0 20.0 8 RN 214-0.3-02-47M 0.3 40 47.0 1700 12.5 10.0 25.0 14 RN 214-0.5-02-56M 0.5 40 56.0 1700 12.5 10.0 25.0 15 RN 214-0.5-02-39M 0.5 40 39.0 830 12.5 10.0 25.0 14 RN 214-0.8-02-27M 0.8 40 27.0 500 12.5 10.0 25.0 15 RN 214-1-02-15M 1.0 40 15.0 370 12.5 10.0 25.0 14 RN 214-1.2-02-10M 1.2 40 10.0 195 12.5 10.0 25.0 15 RN 214-1.5-02-6M8 1.5 40 6.8 123 12.5 10.0 25.0 15 RN 214-2-02-4M2 2.0 40 4.2 100 12.5 10.0 25.0 14

4 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Filter Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN 214-2-02-2M2 2.0 40 2.2 67 12.5 10.0 25.0 14 RN 214-2.5-02-3M3 2.5 40 3.3 72 12.5 10.0 25.0 15 RN 214-3-02-2M0 3.0 40 2.0 52 12.5 10.0 25.0 14 RN 214-4-02-1M5 4.0 40 1.5 34 12.5 10.0 25.0 15 RN 216-0.5-02-47M 0.5 60 47.0 960 12.5 10.0 25.0 15 RN 216-0.5-02-39M 0.5 60 39.0 920 12.5 10.0 25.0 15 RN 216-0.5-02-27M 0.5 60 27.0 790 12.5 10.0 25.0 15 RN 216-0.8-02-27M 0.8 60 27.0 370 12.5 10.0 25.0 16 RN 216-1-02-15M 1.0 60 15.0 260 12.5 10.0 25.0 16 RN 216-1-02-10M 1.0 60 10.0 210 12.5 10.0 25.0 15 RN 216-1.3-02-6M8 1.3 60 6.8 140 12.5 10.0 25.0 16 RN 216-1.5-02-10M 1.5 60 10.0 148 12.5 10.0 25.0 16 RN 216-1.7-02-4M0 1.7 60 4.0 87 12.5 10.0 25.0 16 RN 216-2-02-3M3 2.0 60 3.3 70 12.5 10.0 25.0 16 RN 216-2-02-2M2 2.0 60 2.2 66 12.5 10.0 25.0 15 RN 218-0.4-02-100M 0.4 40 100 2800 10.0 12.5 20.0 8 RN 218-0.6-02-47M 0.6 40 47.0 1200 10.0 12.5 20.0 8 RN 218-0.7-02-39M 0.7 40 39.0 1150 10.0 12.5 20.0 8 RN 218-0.9-02-27M 0.9 40 27.0 620 10.0 12.5 20.0 8 RN 218-1-02-22M 1.0 40 22.0 520 10.0 12.5 20.0 8 RN 218-1.1-02-15M 1.1 40 15.0 420 10.0 12.5 20.0 8 RN 218-1.4-02-10M 1.4 40 10.0 330 10.0 12.5 20.0 8 RN 218-1.7-02-6M8 1.7 40 6.8 180 10.0 12.5 20.0 8 RN 218-2.2-02-3M3 2.2 40 3.3 100 10.0 12.5 20.0 8 RN 222-0.5-02-56M 0.5 40 56.0 1800 15.0 12.5 29.3 27 RN 222-0.6-02-47M 0.6 40 47.0 1300 15.0 12.5 29.3 26 RN 222-0.8-02-39M 0.8 40 39.0 1000 15.0 12.5 29.3 27 RN 222-1-02-33M 1.0 40 33.0 1300 15.0 12.5 29.3 29 RN 222-1-02-18M 1.0 40 18.0 630 15.0 12.5 29.3 26 RN 222-1.5-02-10M 1.5 40 10.0 250 15.0 12.5 29.3 26 RN 222-2-02-6M8 2.0 40 6.8 156 15.0 12.5 29.3 28 RN 222-2.5-02-5M6 2.5 40 5.6 110 15.0 12.5 29.3 27 RN 222-3-02-4M5 3.0 40 4.5 80 15.0 12.5 29.3 28 RN 222-4-02-3M3 4.0 40 3.3 46 15.0 12.5 29.3 28 RN 232-0.6-02-47M 0.6 40 47.0 1300 15.0 12.5 29.3 37 RN 232-1-02-18M 1.0 40 18.0 390 15.0 12.5 29.3 38 RN 232-1.6-02-10M 1.6 40 10.0 170 15.0 12.5 29.3 38 RN 232-2.5-02-5M6 2.5 40 5.6 86 15.0 12.5 29.3 38 RN 232-4-02-3M3 4.0 40 3.3 54 15.0 12.5 29.3 38 RN 242-0.5-02-82M 0.5 40 82.0 2700 15.0 12.5 34.3 37 RN 242-1-02-33M 1.0 40 33.0 810 15.0 12.5 34.3 38 RN 242-1.4-02-27M 1.4 40 27.0 500 15.0 12.5 34.3 38 RN 242-2-02-6M8 2.0 40 6.8 192 15.0 12.5 34.3 37 RN 242-4-02-3M3 4.0 40 3.3 67 15.0 12.5 34.3 38 RN 242-6-02-1M8 6.0 40 1.8 20 15.0 12.5 34.3 41 Test conditions: Measuring frequency: 10 kHz; 50 mV; Inductance tolerance: +50%, -30%; Resistance tolerance: ±15% @ 25°C; Electrical characteristics @ 25°C: ±2°C; Stray Inductance measurement between pin 1 and 2 (pin 3 and 4 shorted) For mechanical tolerances refer to mechanical data section.

5 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Product selector Thermal Derating If higher ambient temperatures than the specified apply, the nominal current needs to be reduced according to the graph below.

6 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Typical attenuation/resonance frequency characteristics Per CISPR 17; 50 Ω/50 Ω asym X can be exchanged with either 1 or 2 for different housing configuration, attenuation is similar RN 102, RN 202 RN 204 RN 112, RN 212 (<1 A) RN 112, RN 212 (>1 A) RN 114, RN 214 RN 116, RN 216

7 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 RN 218 RN 122, RN 222 RN 232 RN 142, RN 242 RN 143 RN 152

8 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Mechanical data RN 102 RN 112, RN 114, RN 116, RN 122, RN 142/3 RN 152 A H A H A H B W P 24 31 B 13 42 W P 42 13 B 13 24 W P 24 13 L P L P L P RN 202 RN 204 RN 212, RN 218 A H A H A H 3 4 4 3 3 4 4 3 3 4 4 3 B 1 2 W P 2 1 B 1 2 W P 2 1 B 1 2 W P 2 1 L P L P L P RN 214, RN 216, RN 222, RN 232, RN 242 A H 3 4 4 3 B W 1 2 P 2 1 L P Pin material: Steel (base), Cu (under plating), Sn (final plating 6µm) Dimensions A B H L W P ØP (±0.6 mm) (±0.6 mm) (±0.3 mm) (±0.3 mm) (±0.3 mm) (±0.5 mm) (±0.1 mm) RN 102 10.0 mm 10.0 mm 9.0 mm 14.0 mm 14.0 mm 4.0 mm 0.6 mm RN 112 15.0 mm 10.0 mm 12.6 mm 17.7 mm 17.1 mm 4.0 mm 0.8 mm RN 114 20.1 mm 12.5 mm 13.2 mm 22.5 mm 21.5 mm 4.0 mm 0.8 mm RN 116 20.1 mm 12.5 mm 13.2 mm 22.5 mm 21.5 mm 4.0 mm 0.8 mm RN 122 25.0 mm 15.0 mm 16.5 mm 28.0 mm 27.0 mm 4.0 mm 0.8 mm RN 142 30.0 mm 20.0 mm 19.7 mm 33.1 mm 32.5 mm 4.3 mm 0.8 mm RN 143 30.0 mm 20.0 mm 19.7 mm 33.1 mm 32.5 mm 4.3 mm 0.8 mm RN 152 40.0 mm 15.0 mm 25.0 mm 43.0 mm 41.8 mm 4.5 mm 1.2 mm RN 202 5.1 mm 15.2 mm 13.5 mm 8.8 mm 18.2 mm 4.5 mm 0.8 mm RN 204 7.6 mm 10.0 mm 14.3 mm 9.0 mm 14.0 mm 4.0 mm 0.5 mm RN 212 10.0 mm 15.0 mm 20.0 mm 12.5 mm 18.0 mm 4.0 mm 0.8 mm RN 214 12.5 mm 10.0 mm 25.0 mm 15.5 mm 23.0 mm 4.0 mm 0.8 mm RN 216 12.5 mm 10.0 mm 25.0 mm 15.5 mm 23.0 mm 4.0 mm 0.8 mm RN 218 10.0 mm 12.5 mm 20.0 mm 12.5 mm 18.0 mm 4.0 mm 0.8 mm RN 222 15.0 mm 12.5 mm 29.3 mm 18.0 mm 31.0 mm 4.0 mm 0.8 mm RN 232 15.0 mm 12.5 mm 34.3 mm 18.0 mm 31.0 mm 4.2 mm 0.8 mm RN 242 15.0 mm 12.5 mm 34.3 mm 18.0 mm 31.0 mm 4.2 mm 0.8 mm Please visitwww.schaffner.comto find more details on filter connections.

9 EMC/EMI Products Schaffner Group Datasheets 08 Nov 2018 Headquarters, global Sales and application centers innovation and development Switzerland China Spain Schaffner Group Schaffner EMC Ltd. Shanghai Schaffner EMC España Nordstrasse 11 T20-3 C, No 565 Chuangye Road, Calle Caléndula 93, Miniparc III, Edificio E 4542 Luterbach Pudong district El Soto de Moraleja, Alcobendas T +41 32 681 66 26 201201 Shanghai 28109 Madrid info@schaffner.com T +86 21 3813 9500 T +34 917 912 900 www.schaffner.com cschina@schaffner.com F +34 917 912 901 www.schaffner.com.cn spainsales@schaffner.com Finland Sweden Schaffner Oy Schaffner EMC AB Sauvonrinne 19 H Tegeluddsvägen 76, 2tr 08500 Lohja 115 28 Stockholm T +358 50 468 7284 T +46 8 5050 2425 finlandsales@schaffner.com swedensales@schaffner.com www.schaffner.com France Schaffner EMC S.A.S. Switzerland 16-20 Rue Louis Rameau Schaffner EMV AG 95875 Bezons Nordstrasse 11 T +33 1 34 34 30 60 4542 Luterbach F +33 1 39 47 02 28 T +41 32 681 66 26 francesales@schaffner.com switzerlandsales@schaffner.com Germany Taiwan R.O.C. Schaffner Deutschland GmbH Schaffner EMV Ltd. Schoemperlenstrasse 12B 20 Floor-2, No 97, Section 1, XinTai 5th Road 76185 Karlsruhe 22175 XiZhi District New Taipei City 22175 T +49 721 56910 T +886 2 2697 5500 F +49 721 569110 F +886 2 2697 5533 germanysales@schaffner.com taiwansales@schaffner.com www.schaffner.com.tw India Schaffner India Pvt. Ltd Thailand REGUS WORLD TRADE CENTRE Schaffner EMC Co. Ltd. WTC, 22nd Floor Unit No 2238, Brigade Northern Region Industrial Estate Gateway Campus, 26/1, Dr. Rajkumar Road 67 Moo 4 Tambon Ban Klang Malleshwaram (W) Amphur Muangg P.O. Box 14 560055 Bangalore 51000 Lamphun T +91 80 67935355 T +66 53 58 11 04 indiasales@schaffner.com F +66 53 58 10 19 thailandsales@schaffner.com Italy Schaffner EMC S.r.l. United Kingdom Via Ticino, 30 Schaffner Ltd. 20900 Monza (MB) 5 Ashville Way, Molly Millars Lane To find your local partner within Schaffner‘s T +39 039 21 41 070 Wokingham global network:www.schaffner.com italysales@schaffner.com RG41 2PL Berkshire © 2018 Schaffner Group T +44 118 9770070 Japan F +44 118 9792969 Schaffner EMC K.K. The content of this document has been uksales@schaffner.com 1-32-12, Kamiuma, Setagaya-ku carefullycheckedandunderstood.However, 7F Mitsui-seimei Sangenjaya Bldg. USA neitherSchaffnernoritssubsidiariesassume 154-0011 Tokyo Schaffner EMC Inc. any liability whatsoever for any errors or T +81 3 5712 3650 52 Mayfield Avenue inaccuracies of this document and the F +81 3 5712 3651 08837 Edison, New Jersey consequences thereof. Published specifica- japansales@schaffner.com T +1 800 367 5566 tions are subject to change without notice. www.schaffner.jp T +1 732 225 9533 Productsuitabilityforanyareaofapplication F +1 732 225 4789 must ultimately be determined by the Singapore usasales@schaffner.com customer. In all cases, products must never Schaffner EMC Pte Ltd. www.schaffnerusa.com be operated outside their published #05-09, Kg Ubi Ind. Estate specifications. Schaffner does not guarantee 408705 Singapore Schaffner North America theavailabilityofallpublishedproducts.This T +65 6377 3283 6722 Thirlane Road disclaimer shall be governed by substantive F +65 6377 3281 24019 Roanoke, Virginia Swiss law and resulting disputes shall be singaporesales@schaffner.com T +1 276 228 7943 settledbythecourtsattheplaceofbusiness F +1 276 228 7953 of Schaffner Holding AG. Latest publications andacompletedisclaimercanbedownloa- Schaffner North America ded from the Schaffner website. All 823 Fairview Road trademarks recognized. 24382 Wytheville, Virginia T +1 276 228 7943 F +1 276 228 7258