DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 RoHS compliant & Halogen Free 2 V. 7 1 0 2 1, 0 e n u J – n o ti a c cifi e p s t c u d o r P

Product specification 2 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 SCOPE ORDERING INFO RMATION - GLOBAL PART NUMBER & 12NC This specifica tion describes Both part numbers are identified by the series, size, tolerance, packing RL0402 to RL2512 low ohmic chip type, temperature coefficient, taping reel and resistance value. resistors with lead-free terminations YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee made by thick film process. GLOBAL PART NUMBER (PREFERRED) APPLICATIONS RL XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7)  Converters  Printer equipment (1) SIZE  Server board 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512  Telecom (2) TOLERANCE  Consumer F = ±1%  Car electronics G = ±2% J = ±5% FEATURES "-" = Jumper ordering  AEC-Q200 qualified (3) PACKAGING TYPE  Halogen Free Epoxy R = Paper taping reel K = Embossed taping reel  RoHS compliant (4) TEMPERATURE COEFFICIENT OF RESISTANCE  Hazardous wastes  High component and – = Based on spec equipment reliability (5) TAPING REEL  Saving of PCB space 07 = 7 inch dia. Reel and standard power  Non-forbidden materials used 10 = 10 inch dia. Reel and standard power in products/production 13 = 13 inch dia. Reel and standard power  Low resistances applied to 7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206) current sensing (6) RESISTANCE VALUE  MSL Class: MSL 1 There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule of global part number ORDERING EXAMPLE Resistance code rule Examp le The ordering code of a RL0603 0R1 = 0.1 Ω chip resistor, value 0.56Ω with 0RXXX 0R12 = 0.12 Ω ±1% tolerance, supplied in 7-inch (1 to 976 mΩ) 0R105 = 0.105 Ω tape reel is: RL0603FR-070R56L. 1R = 1 Ω XRXX 1R5 = 1.5 Ω NOTE (1 to 9.76 Ω) 9R76 = 9.76 Ω 1. All our R-Chip products meet RoHS XXRX 10R = 10 Ω compliant and Halogen Free. "LFP" of (10 to 97.6 Ω) 97R6 = 97.6 Ω the internal 2D reel label mentions "Lead Free Process" XXXR 100R = 100 Ω (100 to 976 Ω) 2. On customized label, "LFP" or specific symbol can be printed XKXX 1K = 1,000 Ω (1 to 9.76 KΩ) 9K76 = 9760 Ω XMXX 1M = 1,000,000 Ω (1 to 9.76 MΩ) 9M76= 9,760,000 Ω www.yageo.com Jun. 01, 2017 V.2

Product specification 3 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 PP HH YYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 / 2390 / 2322 XXX XXXXX L Last digit of 12NC (1) ( 2 ) (3) (4) Resistance decade (3) Last digit EMBOSSED (2) PAPER/PE (2) 0.01 to 0.0976Ω 0 START TOL. RESISTANCE SIZE TYPE IN (1) (%) RANGE TAPE ON REEL TAPE ON REEL (units) 0.1 to 0.976Ω 7 4,000 5,000 10,000 1 to 9.76Ω 8 0402 LRC31 2350 ±5% 0.05 to 1 Ω - - 513 20xxx 10 to 97.6Ω 9 LRC32 2350 ±1% 0.05 to 1 Ω - - 513 22xxx 100 to 976Ω 1 0603 LRC21 2350 ±5% 0.01 to 1 Ω - 512 10xxx - 1 to 9.76 kΩ 2 LRC22 2350 ±1% 0.01 to 1 Ω - 512 12xxx - 10 to 97.6 kΩ 3 0805 LRC11 2350 ±5% 0.01 to 1 Ω - 511 10xxx - 100 to 976 kΩ 4 LRC12 2350 ±1% 0.01 to 1 Ω - 511 12xxx - 1 to 9.76 MΩ 5 LRC11P 2350 ±1% 0.01 to 1 Ω - 511 15xxx - 10 to 97.6 MΩ 6 LRC12P 2350 ±5% 0.01 to 1 Ω - 511 17xxx - Example: 0.02Ω = 0200 or 200 1206 LRC01 2350 ±5% 0.01 to 1 Ω - 510 10xxx - 0.3Ω = 3007 or 307 LRC02 2350 ±1% 0.01 to 1 Ω - 510 12xxx - 1Ω = 1008 or 108 LRC01P 2350 ±1% 0.01 to 1 Ω - 519 01xxx - 33 kΩ = 3303 or 333 LRC02P 2350 ±5% 0.01 to 1 Ω - 519 1xxxx - 10 MΩ = 1006 or 106 1210 LPRC101 2390 ±5% 0.01 to 0.0976 Ω - 735 90xxx - LPRC101 2390 ±5% 0.1 to 1 Ω - 735 60xxx - ORDERING EXAMPLE LPRC102 2390 ±1% 0.01 to 1 Ω - 735 3xxxx - The ordering code of a RL0603 chip 1218 LPRC201 2322 ±5% 0.01 to 1 Ω 735 64xxx - - resistor, value 0.56 Ω with ±1% LPRC201 2322 ±1% 0.01 to 1 Ω 735 7xxxx - - tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or 2010 LPRC111 2322 ±5% 0.01 to 0.0976 Ω 760 90xxx - - RL0603FR-070R56L. LPRC111 2322 ±5% 0.1 to 1 Ω 760 60xxx - - LPRC111 2322 ±1% 0.01 to 0.0976 Ω 761 90xxx - - NOTE LPRC111 2322 ±1% 0.1 to 1 Ω 761 6xxxx - - 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of 2512 LPRC221 2322 ±5% 0.01 to 0.0976 Ω 762 90xxx - - the internal 2D reel label mentions LPRC221 2322 ±5% 0.1 to 1 Ω 762 60xxx - - "Lead Free Process" LPRC221 2322 ±1% 0.01 to 0.0976 Ω 763 90xxx - - 2. On customized label, "LFP" or specific LPRC221 2322 ±1% 0.1 to 1 Ω 763 6xxxx - - symbol can be printed (1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note). www.yageo.com Jun. 01, 2017 V.2

Product specification 4 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 MARKING RL0402 / RL0603: R<100 mΩ EXCEPT 10/20/30/40/50/60 mΩ No marking Fig. 1 RL0603: R≥100 mΩ, R = 10/20/30/40/50/60 mΩ E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ):3 digits F ig. 2 Value = 220 mΩ The “R” is used as a decimal point; the other 2 digits are significant. RL0 805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ): 4 digits The “R” is used as a decimal point; the other 3 digits are significant. F ig. 3 Value = 20 mΩ For further marking information, please see special data sheet “Chip resistors marking”. C O NSTRUCTION The resistors are constructed out of a high-grade ceramic OOUUTTLLIINNEESS body. Internal metal electrodes are added at each end and For dimension see Table 1 connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. DIMENSIONS Table 1 For outlines see fig. 4 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10 RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20 Fig. 4 Chip resistor outlines RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25 RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 www.yageo.com Jun. 01, 2017 V.2

Product specification 5 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 ELECTRICAL CHARACTERISTICS Table 2 Power Operating Temp. T. C. R. Type Resistance range & tolerance Jumper criteria P70 range ( ppm/°C) Max. resistance 20mΩ RL0402 1/16W 50mΩ ≤ R < 1Ω Rated current 1.5A Max. resistance 20mΩ R L0603 1/10W -55°C to +155°C 10mΩ ≤ R < 1Ω Rated current 2A Max. resistance 20mΩ 1/8W 10mΩ ≤ R < 1Ω Rated current 2.5A R L0805 1/4W -55°C to +125°C 10mΩ ≤ R < 1Ω -- -- Max. resistance 20mΩ 1/4W -55°C to +155°C 10mΩ ≤ R < 1Ω R L1206 See following table Rated current 3.5A E24 ±1%, ±2%, ±5% “T.C.R.- RL series” 1/2W -55°C to +125°C 10mΩ ≤ R < 1Ω -- -- R L1210 1/2W 10mΩ ≤ R < 1Ω -- -- RL1218 1W 10mΩ ≤ R < 1Ω -- -- -55°C to +155°C R L2010 3/4W 10mΩ ≤ R < 1Ω -- -- RL2512 1W 10mΩ ≤ R < 1Ω -- -- TYPE / RESISTANCE TEMPERATURE COEFFICIENT RANGE OF RESISTANCE 50mΩ≤R<100mΩ 100mΩ≤R<500mΩ 500mΩ≤R<1Ω RL0402 50mΩ≤R<1Ω ±1000 ppm/°C ±800 ppm/°C ±300 ppm/°C 10mΩ≤R≤36mΩ 36mΩ<R≤91mΩ 91mΩ<R≤500mΩ 500mΩ<R<1Ω RL0603 10mΩ≤R<1Ω ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±300 ppm/°C 10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R<500mΩ 500mΩ≤R<1Ω RL0805 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C 10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω RL1206 10mΩ≤R<1Ω ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL1210 ±1,500 ppm/°C ±1,000 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2010 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2512 ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C 10mΩ≤R≤30mΩ 30mΩ<R≤56mΩ 56mΩ<R≤180mΩ 180mΩ<R<1Ω RL1218 10mΩ≤R<1Ω ±2,000 ppm/°C ±1,000 ppm/°C ±700 ppm/°C ±250 ppm/°C FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. www.yageo.com Jun. 01, 2017 V.2

Product specification 6 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 P ACKIN G ST YLE AND PACKAGING QUANTITY Table 3 Pac king style and packaging quantity PA CKING STY LE REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512 Paper taping re el (R) 7" (178 mm) 10,000 5,000 5,000 5,000 5,000 --- --- --- 10" (254 mm) 20,000 10,000 10,000 10,000 10,000 --- --- --- 13" (330 mm) 50,000 20,000 20,000 20,000 20,000 --- --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 4,000 NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGGTTEEMMPPEERRAATTUURREE RRAANNGGEE Normal Power: Range: –55 °C to +155 °C (Fig. 5) Double Power: Range: –55 °C to +125 °C (Fig. 6) PPOOWWEERR RRAATTIINNGG Each type rated power at 70 °C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W, 1/4W; RL1206=1/4 W, 1/2W; RL1210=1/2 W; RL1218=1 W; RL2010=3/4 W; Fig. 5 Maximum dissipation (Pm ax) in percentage of rated power RL2512=1 W. as a function of the oper ating ambient temperature (Tamb) RATED VOLTAGE Tcohrer eDsCpo onrd iAngC t(or mthse) craotnetdin puoowuse rw ios rdkeinteg rvmoilntaegde b y the following formula: V = (PxR) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) Fig. 6 Maximum dissipation (P ) in percentage of rated power m ax as a function of the oper ating ambient temperature (Tamb) www.yageo.com Jun. 01, 2017 V.2

Product specification 7 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ IEC 60115-1 4.25.1 1,000 hours at 70±2°C applied RCWV ±(2% +0.5mΩ) Endurance MIL-STD-202 Method 108A 1.5 hours on, 0.5 hour off, still air required High Temperature IEC 60068-2-2 1,000 hours at maximum operating ±(1% +0.5mΩ) Exposure temperature depending on specification, unpowered No direct impingement of forced air to the parts Normal power : Tolerances: 155±5℃ Double power : Tolerances: 125±5℃ Moisture Resistance MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at ±(2% +0.5mΩ) 8 hours, 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Thermal Shock MIL-STD-202 Method 107G -55/+125 °C ±(1% +0.5mΩ) Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Short time overload IEC60115-1 4.13 RL standard power: 2.5 times rated voltage for ±(2% +0.5mΩ) 5 sec at room temperature No visible damage RL high power: 5 times rated power for 5 sec at room temperature Board Flex/ IEC 60115-1 4.33 Device mounted on PCB test board as ±(1% +0.5mΩ) Bending described, only 1 board bending required No visible damage 3 mm bending Bending time: 60±5 seconds Ohmic value checked during bending www.yageo.com Jun. 01, 2017 V.2

Product specification 8 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting J-STD-002 test B Electrical Test not required Well tinned (≥95% covered) No visible damage Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching J-STD-002 test D Leadfree solder, 260 °C, 30 seconds No visible damage immersion time - Resistance to IEC 60115-1 4.18 Condition B, no pre-heat of samples. ±(1% +0.5mΩ) Soldering Heat Leadfree solder, 260 °C, 10 seconds No visible damage immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Jun. 01, 2017 V.2

Product specification 9 C hip Resistor Surface Mount R L SER IES 0 402 to 2512 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 2 May 31, 2017 - - Add 10" packing Version 1 D ec. 16, 2015 - - Extend 0805 T.C.R. range Version 0 Nov. 11, 2014 - - First issue of this specification “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Jun. 01, 2017 V.2

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Y ageo: RL1210FR-070R1L RL0603FR-070R5L RL1206FR-070R33L RL1206FR-070R22L RL1206FR-070R1L RL1206FR- 070R12L RL1206FR-070R2L RL1206JR-070R51L RL0805FR-070R1L RL0805FR-070R22L RL0603JR-070R47L RL0402FR-070R1L RL0603JR-070R1L RL1206FR-070R015L RL1206FR-070R01L RL0805JR-070R47L RL0805JR- 070R1L RL0805FR-7W0R1L RL0805JR-070R22L RL1210JR-070R1L RL2512FK-070R05L RL2512FK-070R01L RL2512JK-070R2L RL2512JK-070R47L RL1206FR-070R02L RL0805FR-070R2L RL0402FR-070R499L RL0603FR- 070R499L RL0603FR-070R27L RL0603JR-070R22L RL1206JR-070R15L RL1206JR-070R1L RL1206JR-070R47L RL1210FR-070R02L RL2512FK-070R1L RL2512FK-070R33L RL1210FR-070R82L RL2512FK-070R015L RL0805FR-7W0R5L RL0402FR-070R51L RL0402JR-070R1L RL0402JR-070R33L RL0402FR-070R402L RL0402FR-070R5L RL0603FR-070R402L RL0603FR-070R4L RL1206FR-070R4L RL1206FR-070R5L RL1210FR- 070R2L RL1210FR-070R5L RL1206JR-070R051L RL1206JR-070R05L RL1206JR-070R12L RL1206JR-070R18L RL1206JR-070R24L RL1206JR-070R2L RL1218FK-070R33L RL2010FK-070R01L RL0805FR-070R05L RL0805FR- 070R33L RL1218FK-070R22L RL0805FR-070R27L RL1206FR-070R15L RL2512JK-070R1L RL2512FK-070R22L RL0805FR-070R5L RL0402FR-070R33L RL1206FR-070R068L RL1206JR-070R39L RL1206JR-070R27L RL1206JR-070R22L RL1206FR-070R75L RL1206FR-070R56L RL0603FR-070R82L RL0805FR-070R47L RL0603FR-070R47L RL0603FR-070R33L RL0603FR-070R22L RL0603FR-070R1L RL1206FR-070R033L RL1206FR-070R03L RL0805FR-070R12L RL1218JK-070R068L RL1218JK-070R02L RL1218JK-070R015L RL1218JK-070R01L RL1218FK-070R1L RL2512FK-070R018L RL2512FK-070R047L RL2512FK-070R04L RL2512FK-070R039L RL2512FK-070R033L RL2512FK-070R027L RL2512FK-070R02L RL2512FK-070R022L RL2512FK-070R39L RL2512FK-070R2L RL2512FK-070R15L RL2512FK-070R68L RL2010JK-070R47L