RF2040E • Designed for 902.0 - 928.0 MHz Applications • Optimized for use with the TRC103 Transceiver 915.0 MHz • Balanced 150 ohm IC Interface • Complies with Directive 2002/95/EC (RoHS) Pb SAW Filter Absolute Maximum Ratings Rating Value Units Input Power Level +15 dBm DC Voltage ±5 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Soldering Temperature (10 seconds / 5 cycles maximum) 260 °C SM3030-8 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 915.0 MHz C 1 dB Bandwidth BW 31 MHz 1 Maximum Insertion Loss, 902.0 to 928.0 MHz IL 2.0 3.0 MAX Amplitude Ripple, p-p, 902.0 to 928.0 MHz 0.7 1.0 Rejection Referenced to Insertion Loss at 915.0 MHz: 710 to 810 MHz 37 40 dB 810 to 860 MHz 37 40 1010 to 1060 MHz 37 40 1060 to 1110 MHz 43 45 1110 to 1210 MHz 45 48 Source Impedance Z 50  S Load Impedance Z 130  L Case Style SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 804, YWWSs Standard Reel Quantity Reel Size 7 Inch 1000 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Single-ended Port 6 Balanced Port 1, 3 Case Ground 4, 5, 7, 8 No Connection 2 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50  and measured with 50  network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. 6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 1 of 10

(cid:2) (cid:3) (cid:4) (cid:5) (cid:6) (cid:5) (cid:7) (cid:28) (cid:13) (cid:2) (cid:25) (cid:26) (cid:5) (cid:27) (cid:8) (cid:29) (cid:30) (cid:30) (cid:31) (cid:16) ! (cid:20) (cid:16) (cid:22) (cid:15) (cid:8) (cid:25) (cid:16) (cid:23) (cid:14) (cid:16) (cid:20) (cid:5) (cid:24)(cid:8) (cid:10)(cid:14) (cid:15) (cid:4) (cid:5) (cid:6) (cid:7) (cid:8) (cid:16) (cid:24)(cid:4) (cid:10)(cid:14) (cid:15) (cid:2) (cid:9) (cid:10)(cid:11) (cid:12) (cid:13) (cid:20) (cid:14) (cid:21)(cid:22) (cid:14) (cid:14) (cid:23) (cid:3) (cid:2) (cid:3) (cid:4) (cid:5) (cid:6) (cid:5) (cid:7) (cid:8) (cid:13) (cid:2) (cid:25) (cid:26) (cid:5) (cid:27) (cid:6) (cid:24)(cid:2) (cid:10)(cid:18) (cid:19) (cid:2) (cid:7) (cid:7) (cid:6) (cid:16) (cid:3) (cid:24)(cid:5) (cid:10)(cid:18) (cid:19) (cid:16) (cid:24)(cid:4) (cid:10)(cid:14) (cid:15) (cid:5) (cid:24)(cid:8) (cid:10)(cid:14) (cid:15) (cid:19) (cid:23) (cid:30)(cid:31) ! (cid:30)(cid:21)(cid:22) (cid:8) (cid:2) (cid:9) (cid:3) (cid:9) (cid:7) (cid:7) (cid:9) (cid:6) (cid:4) " # (cid:10)$ (cid:22) (cid:23) % (cid:6) (cid:9) (cid:9) (cid:10)(cid:18) (cid:19) (cid:9) (cid:24)(cid:9) (cid:16) (cid:4) (cid:10)(cid:25) (cid:19) (cid:6) (cid:10)(cid:11) (cid:12) (cid:13) (cid:26) (cid:27) (cid:27) (cid:28) (cid:29) (cid:20) (cid:2) (cid:3) (cid:4) (cid:5) (cid:6) (cid:5) (cid:7) (cid:8) (cid:9) (cid:5) (cid:8) (cid:10) (cid:11) (cid:12) (cid:8) (cid:13) (cid:14) (cid:15) (cid:16) (cid:15) (cid:17) (cid:8) (cid:18) (cid:19) (cid:20) (cid:21) (cid:22) (cid:23) (cid:24) (cid:4) (cid:5) (cid:6) (cid:2) (cid:9) (cid:10)(cid:11) (cid:12) (cid:13) (cid:3) (cid:2) (cid:3) (cid:4) (cid:5) (cid:6) (cid:5) (cid:7) (cid:8) (cid:17) (cid:10)(cid:14) (cid:15) (cid:6) (cid:9) (cid:9) (cid:10)(cid:14) (cid:15) (cid:2) (cid:7) (cid:2) (cid:9) (cid:10)(cid:11) (cid:12) (cid:13) (cid:16) (cid:4) (cid:10)(cid:18) (cid:19) Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 2 of 10

RF2040E Broadband Response, 200 to 2000 MHz Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 3 of 10

RF2040E Response, 815.0 to 1015.0 MHz Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 4 of 10

RF2040E Response, 865.0 to 965.0 MHz Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 5 of 10

RF2040E Passband Response Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 6 of 10

RF2040E Input Impedance Plot Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 7 of 10

RF2040E Balanced Output Impedance Plot Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 8 of 10

8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions mm Inches Dimension Min Nom Max Min Nom Max A 2.87 3.0 3.13 0.113 0.118 0.123 B 2.87 3.0 3.13 0.113 0.118 0.123 C 1.14 1.27 1.40 0.045 0.050 0.055 D 0.79 0.92 1.05 0.031 0.036 0.041 E 0.62 0.75 0.88 0.024 0.029 0.034 F 0.47 0.60 0.73 0.018 0.024 0.029 G 0.47 0.60 0.73 0.018 0.024 0.029 H 1.07 1.20 1.33 0.042 0.047 0.052 I 3.19 0.126 J 0.81 0.032 " K 0.96 0.038 # # # L 0.81 0.032 M 1.39 0.055 $ (cid:18) & N 0.23 0.009 O 0.38 0.015 " % (cid:18) Case Materials Materials $ Solder Pad 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Plating (cid:10) (cid:10) Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic PCB Footprint Top View Pb Free TOP VIEW BOTTOM VIEW B C E 8 8 1 7 7 1 H Y A 2 W 8 6 6 2 0 W 4 S G 3 5 5 3 4 4 D F Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 9 of 10

Tape and Reel Specifications “B “ Nominal Size Quantity Per Reel .F F. Inches millimeters E E R R 0 " 7 178 1000 0 B 1 " 13 330 3000 See Detail "A" 12.0 3.0 Carrier Tape Dimensions 1 Ao 3.35 mm Bo 3.35 mm Ko 1.4 mm Pitch 8.0 mm 2.0 20.2 W 12.0 mm COMPONENT ORIENTATION and DIMENSIONS 0.3 ± 0.05 2.0 4.0 PIN #1 1.50 A 75 1. RO.3 (MAX.) 5 5. 0 2. Bo 1 B B Ao Pitch A R0.5 (MAX.) Ko 1.5 SECTION A-A USER DIRECTION OF FEED SECTION B-B Copyright © Murata Murata Manufacturing Co., Ltd. All rights reserved. April 2015 www.murata.com RF2040E (R) 1/18/17 Page 10 of 10