SPECIFICATION Part No. : RECE.20279.001E.01 Product Name : IPEX MHF Receptacle Compatible with IPEX MHFII, Hirose U.FL Mating Height: 2.5mm MAX 2,500 pieces per reel Photo : SPE-16-8-032/A/NW Page 1 of 7

1. Introduction The Taoglas RECE.20279.001E.01 is a 3 pad type wire-to-board MHF SMT Receptacle solution that is ultra small, lightweight and low profile (2.5mm MAX.) with an operational frequency range of DC to 6 GHz. Taoglas RECE.20279.001E.01 is gold plated to have superior performance and allow easy mounting of the male RF connector. Packaged on tape and reel, this receptacle is designed to be placed with automatic “pick and place” equipment. The RECE.20279.001E.01 acts as a 50 Ohm transmission line to connect the micro-miniature RF connector to the printed circuit board. It is fully compatible with MHFII and Hirose U.FL connector. Applicable Technology RECE.20279.001E.01 receptacles commonly integrated into GSM module, GPS module, Wireless LAN modules. SPE-16-8-032/A/NW Page 2 of 7

2. Specification Electrical Operation Frequency DC to 6 GHz 1.3 Max at DC~3 GHz VSWR 1.45 Max at 3~6 GHz Nominal Impedance 50 Ohm Rated Voltage AC 60V Contact Resistance 20m Ohm MAX. (signal) and 20m Ohm MAX. (Ground) Withstand Voltage AC 200V/minute Insulation Resistance 500 M Ohm MIN. /DC 100V Temperature -40 to +90°C Material Outer Contact Copper Alloy (Au plating) Centre Contact Copper Alloy (Au plating) Insulator LCP UL94V-0 Environmental Temperature -40 to +90°C RoHs Complaint Yes Halogen-Free Yes Yes Frequency: 10Hz-100Hz Vibration (Mating Duration: 15mins connector) Peak value of acceleration: 59m/s2 (6G) Direction, cycle: 3 axis, 5 cycles Peak Value of acceleration: 735m/s2 (75G) Duration: 11ms Shock (Mating connector) Waveform: Half sinusoidal Direction: 6 axis Cycles: 3 cycles for each direction Temperature: 40+/- 2°C Humidity Humidity: 90~95%RH Duration 96 hours -40°C for 30mins to 5~35°C for 5 minutes to 90°C for 30mins to 5~35°C for 5 minutes Thermal Shock Transition Time: 5 minutes Cycles: 5 High temperature life 90+/- 2°C for 96 hours Temperature: 40+/-2°C H S gas 2 Relative Humidity: 80+/-5%RH SPE-16-8-032/A/NW Page 3 of 7

Gas H S 3+/-1ppm 2 Duration 96 hours Temperature: 35+/-2°C Salt Water Spray Salt Water Density: 5+/-1% (by weight) Duration: 48 Hours SPE-16-8-032/A/NW Page 4 of 7

3. Technical Drawing SPE-16-8-032/A/NW Page 5 of 7

4. Footprint SPE-16-8-032/A/NW Page 6 of 7

5. Reflow Profile Recommended soldering temperature profile SPE-16-8-032/A/NW Page 7 of 7