RCWE www.vishay.com Vishay Dale Thick Film Surface Mount Chip Resistors, Wraparound, Extremely Low Value (0.01  to 0.976 ) FEATURES • Extremely low resistance values  (0.01  to 0.976 ) • Sulfur resistant (per ASTM B809-95 humid vapo r test) • Enhanced power rating due to long side terminal construction (0612, 1020 types) • Suitable for current sensing and shunts • Metal glaze on high quality ceramic DESIGN SUPPORT TOOLS click logo to get started • Protective overglaze • Lead (Pb)-free solder contacts on Ni barrier layer Models • AEC-Q200 qualified Available • Material categorization: for definitions of complianc e please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING TEMPERATURE RESISTANCE GLOBAL  TOLERANCE CASE SIZE P COEFFICIENT RANGE E-SERIES (2) MODEL 70 °C ± % W ± ppm/°C  400 0.033 to 0.05 5.0 24 RCWE0402 0402 0.125 200 0.051 to 0.196 1.0, 5.0 24; 96 100 0.2 to 0.976 0.5 (1), 1.0, 5.0 700 0.010 to 0.018 5.0 24 400 0.02 to 0.0324 1.0, 5.0 RCWE0603 0603 0.2 200 0.033 to 0.105 1.0, 5.0 24; 96 100 0.11 to 0.976 0.5 (1), 1.0, 5.0 400 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE0805 0805 0.25 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 300 0.010 to 0.016 2.0, 5.0 24 RCWE0612 0612 1.0 200 0.018 to 0.2 2.0, 5.0 100 0.205 to 0.976 1.0, 5.0 24; 96 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE1206 1206 0.5 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 500 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE1210 1210 1.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 200 0.010 to 0.016 2.0, 5.0 24 RCWE1020 1020 2.0 100 0.0162 to 0.976 1.0, 5.0 24; 96 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE2010 2010 1.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE2512 2512 2.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 Notes • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material • Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020) (1) Tight tolerance of 0.5 % is available for resistance values above 0.300  (0402 size) and above 0.200  (0603 to 2512 sizes) (2) Use E24 decades only for 5.0 % tolerance. E24 or E96 decades are available for 0.5 % and 1.0 % tolerance. Refer to standard decade table (www.vishay.com/doc?31001) Revision: 10-Jan-2019 1 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options) R C W E 0 6 0 3 5 1 L 0 F N E A GLOBAL MODEL VALUE TOLERANCE TCR PACKAGING SPECIAL (8 digits) (4 digits) (1 digit) (1 digit) (2 digits) (up to 2 digits) RCWE0402 L = m * D = ± 0.5 % K = ± 100 ppm/°C EA = lead (Pb)-free, (dash number) RCWE0603 R = decimal F = ± 1.0 % N = ± 200 ppm/°C tape/reel from 1 to 99 as RCWE0805 10L0 = 0.01  G = ± 2.0 % M = ± 300 ppm/°C applicable RCWE0612 R470 = 0.47  J = ± 5.0 % Q = ± 400 ppm/°C RCWE1206 Note: P = ± 500 ppm/°C RCWE1210 * Use “L” for resistance T = ± 600 ppm/°C RCWE1020 values < 0.1  G = ± 700 ppm/°C RCWE2010 RCWE2512 TECHNICAL SPECIFICATIONS PARAMETER UNIT 0402 0603 0805 0612 1206 1210 1020 2010 2512 Operating temperature range °C -55 to +155 Maximum operating voltage V (P x R)1/2 Insulation voltage U (1 min) V > 75 > 100 > 200 > 100 > 300 > 300 > 300 > 300 > 300 ins Insulation resistance  > 109 Weight/1000 pieces (typical) g 0.7 3 5.5 11.5 10.5 17.5 27.5 26 40.5 DIMENSIONS RCWE0402 to RCWE2512 RCWE0612, RCWE1020 T2 L a H l b a l b W T1 • 3D models available: www.vishay.com/doc?31106 • Surface mount solder profile recommendations: www.vishay.com/doc?31052 DIMENSIONS in millimeters SOLDER PAD DIMENSIONS in millimeters SIZE RESISTANCE RANGE L W H T1 T2 a b l  0402 0.033 to 0.976 1.05 ± 0.05 0.55 ± 0.05 0.35 ± 0.1 0.3 ± 0.15 0.25 ± 0.1 0.7 0.7 0.3 0.01 to 0.03 0.5 ± 0.2 0.9 1.0 0.4 0603 1.6 ± 0.1 0.85 ± 0.1 0.5 ± 0.1 0.3 ± 0.2 0.033 to 0.976 0.3 ± 0.2 0.7 1.0 0.8 0.01 to 0.03 0.6 ± 0.2 1.0 1.4 0.6 0805 2.0 ± 0.15 1.3 ± 0.1 0.55 ± 0.1 0.35 ± 0.2 0.033 to 0.976 0.4 ± 0.2 0.8 1.4 1.0 0612 0.01 to 0.976 1.6 ± 0.2 3.2 ± 0.2 0.6 ± 0.1 0.4 ± 0.15 0.25 ± 0.15 0.9 3.5 0.8 0.01 to 0.03 0.9 ± 0.2 1.3 1.8 1.0 1206 0.033 to 0.05 3.1 ± 0.15 1.6 ± 0.15 0.6 ± 0.1 0.8 ± 0.2 0.45 ± 0.2 1.2 1.8 1.2 0.051 to 0.976 0.45 ± 0.2 1.0 1.8 1.6 0.01 to 0.03 0.8 ± 0.2 1.3 2.6 1.1 1210 3.1 ± 0.2 2.5 ± 0.2 0.6 ± 0.1 0.4 ± 0.2 0.033 to 0.976 0.4 ± 0.2 0.9 2.6 2.0 1020 0.01 to 0.976 2.5 ± 0.2 5.0 ± 0.2 0.6 ± 0.1 0.55 ± 0.15 0.30 ± 0.15 1.2 5.5 1.4 0.01 to 0.03 1.6 ± 0.3 2.3 3.0 1.4 2010 0.033 to 0.05 5.0 ± 0.2 2.5 ± 0.15 0.6 ± 0.1 0.7 ± 0.3 0.6 ± 0.2 1.4 3.0 3.2 0.051 to 0.976 0.7 ± 0.3 1.4 3.0 3.2 Revision: 10-Jan-2019 2 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE www.vishay.com Vishay Dale DIMENSIONS RCWE0402 to RCWE2512 RCWE0612, RCWE1020 T2 L a H l b a l b W T1 • 3D models available: www.vishay.com/doc?31106 • Surface mount solder profile recommendations: www.vishay.com/doc?31052 DIMENSIONS in millimeters SOLDER PAD DIMENSIONS in millimeters SIZE RESISTANCE RANGE L W H T1 T2 a b l  0.01 to 0.03 2.0 ± 0.3 2.8 3.6 1.4 2512 0.033 to 0.05 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.8 ± 0.3 0.6 ± 0.2 1.6 3.6 3.8 0.051 to 0.976 0.8 ± 0.3 1.6 3.6 3.8 DERATING %120 n wer i100 o P ed 80 at R 60 40 20 0 -55 -25 0 25 75 100 125 155 175 70 Ambient Temperature in °C SINGLE PULSE Axis Title W10 000 10000 10000 n 1020 Tested using a square wave pulse according to wer i 1000 2010 EUNpe6a0k 1=1 5U-m1a. xM. +a x2.. 5p uUlsmea xv./o(1lt a+g 1e 0d0e tfi)n. eFda ilbuyre E dNe1fi4n0e4d0 1-802; o by visible damage or change > 1 % + 0.5 mΩ. P 1206 1000 1000 100 10 2512 100 1st line2nd line 1210 100 1 0.1 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Time in s Revision: 10-Jan-2019 3 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE www.vishay.com Vishay Dale SINGLE PULSE Axis Title W10 000 10000 n Tested using a square wave pulse according to wer i 1000 EUNpe6a0k 1=1 5U-m1a. xM. +a x2.. 5p uUlsmea xv./o(1lt a+g 1e 0d0e tfi)n. eFda ilbuyre E dNe1fi4n0e4d0 1-802; o by visible damage or change > 1 % + 0.5 mΩ. P 1000 100 0612 10 0805 1st line2nd line 100 0603 0402 1 0.1 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Time in s PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal shock MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme ± 1.0 % + 0.0005  2x rated power; size and duration - 0402: 0.5 s, 0603 and 0805: 1 s, Short time overload ± 0.5 % + 0.0005  1206 and larger: 2 s High temperature exposure MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power ± 2.0 % + 0.0005  Temperature cycling JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C) ± 2.0 % + 0.0005  Biased humidity MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)1/2 ± 2.0 % + 0.0005  Mechanical shock MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions ± 1.0 % + 0.0005  Vibration MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± 1.0 % + 0.0005  Operational life MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power ± 2.0 % + 0.0005  MIL-STD-202, method 210, +260 °C solder, 10 s to 12 s dwell, 25 mm/s Resistance to solder heat ± 1.0 % + 0.0005  emergence Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± 2.0 % + 0.0005  PACKAGING REEL MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL CODE RCWE0402 8 mm/punched paper 180 mm/7" 2 mm 10 000 EA RCWE0603 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE0805 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE0612 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1206 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1210 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1020 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA RCWE2010 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA RCWE2512 12 mm/embossed plastic 180 mm/7" 8 mm 2000 EA Notes • Embossed carrier tape per EIA-481-1A • Additional packaging details at: www.vishay.com/doc?31543 Revision: 10-Jan-2019 4 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000