Thick Film Chip Resistors (RC General) Thick Film General Chip Resistors (RC Series) ■ Features ● Small, thin and lightweight ● High reliability ● Applicable Both flow and reflow soldering. ● Suitable size and package for surface mount assembly ● RoHS Compliant. ■ Part Number System RC 0603 F 2552 CS Type (Series) Size : mm (inch) Tolerance Resistance Value Packing Type General purpose 0402 0.4×0.2mm (01005) D ±0.5% - 3-digit code System CS 7” reel RC chip resistor (E-24 series) 0603 0.6×0.3mm (0201) F ±1.0% - 4-digit code System ES 10” reel 1005 1.0×0.5mm (0402) G ±2.0% (E-96 series) AS 13” reel - Jumper : ‘000’ 1608 1.6×0.8mm (0603) J ±5.0% - 2552 : 25.5KΩ * Jumper : ‘J’ 2012 2.0×1.2mm (0805) 3216 3.2×1.6mm (1206) 3225 3.2×2.5mm (1210) 5025 5.0×2.5mm (2010) 6432 6.4×3.2mm (2512)

Thick Film Chip Resistors (RC General) ■ Structure and Dimensions [ Top View ] [ Bottom View ] [ Side View ] A 102 T W B A L [ Unit : mm ] Size(mil) L W T A B Unit Weight RC0402(01005) 0.40±0.02 0.20±0.02 0.13±0.02 0.10±0.03 0.10±0.03 0.04mg RC0603(0201) 0.60±0.03 0.30±0.03 0.23±0.03 0.10±0.05 0.15±0.05 0.15mg RC1005(0402) 1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 0.6mg RC1608(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.35±0.10 2.1mg RC2012(0805) 2.00±0.20 1.25±0.15 0.55±0.10 0.40±0.20 0.35±0.20 4.9mg RC3216(1206) 3.20±0.20 1.60±0.15 0.55±0.10 0.45±0.20 0.40±0.20 9.5mg RC3225(1210) 3.20±0.20 2.55±0.20 0.55±0.10 0.45±0.20 0.40±0.20 16mg RC5025(2010) 5.00±0.20 2.50±0.20 0.55±0.10 0.60±0.20 0.60±0.20 26mg RC6432(2512) 6.30±0.20 3.20±0.20 0.55±0.10 0.60±0.20 0.60±0.20 41mg

Thick Film Chip Resistors (RC General) ■ Applications and Ratings Rated Max Working Resistance Working Size Rated Voltage Tolerance T.C.R Moisture Type Power Voltage Range Temp. (mil) [V] [%] [ppm/℃] Level [W] [V] [Ω] [℃] 1~9.9Ω : ± 300 RC0402 01005 1/32 15 1 ~ 1M 10~1MΩ ± 250 ±1(F) -55~125 ±5(J) 1~9.9Ω : ±300 RC0603 0201 1/20 25 1 ~ 10M 10~10MΩ : ±250 RC1005 0402 1/16 PR 50 RC1608 0603 1/10 50 Level 1 P : Rated Power(W) RC2012 0805 1/8 R : Resistance(Ω) 150 ±0.5(D) 1~9.9Ω : ±300 RC3216 1206 1/4 200 ±1(F) 1 ~ 10M -55 ~ 155 10~10MΩ : ±100 ±5(J) RC3225 1210 1/3 200 RC5025 2010 2/3 200 RC6432 2512 1 200 • Please contact our sales representatives or engineers for other specifications ■ Power Derating Curve ■ Jumper Ratings Rated Max Overload Resistance Working Type Current [A] Current [A] [Ω] Temp.[℃] 0402, 0603 0.5 1 -55 ~ 125 1005 and 1005, 1608 1 2 0.05max bigger sizes -55 ~ 155 2012 and 2012(5 A) 2 bigger sizes 10A 0402, 0603 size ■ Rated Voltage E : Rated Voltage (V) V = P : Rated Power (W) R : Resistance Value (Ω)

Thick Film Chip Resistors (RC General) ■ Rated Voltage 1. The rated voltage for resistor can be a DC continuous working voltage or AC(rms) voltage in commercial line frequency wave form at rated power. It can be expressed as below. 𝐸 = 𝑃×𝑅 E : Rated Voltage(V) P : Rated Power(W) R : Nominal Resistance(Ω) If the value calculated by the equation exceeds Max working Voltage, the rated voltage is limited to max working voltage. In other words, the lower value is the rated voltage. ex) For RC1608 Series [ P=0.1(W), Max working voltage = 50(V) ] 1) The rated voltage, when R=1KΩ 2) The rated voltage, when R=100KΩ 𝐸 = 0.1×1000 = 10 𝑉 𝐸 = 0.1×100000 = 100 𝑉 Value is lower than Max working voltage, Value is higher than Max working voltage, therefore 𝐸 = 10(𝑉) therefore 𝐸 = 50(𝑉) 2. When the rated voltage is applied to the resistor, check the ambient temperature and decrease the lower according to the power derating curve. 3. If higher voltage than rated voltage, the reliability condition and performance cannot be guaranteed. * If pulse wave is applied, the maximum pulse power should be below the rated voltage.

Thick Film Chip Resistors (RC General) ■ Standard Soldering Pad Dimensions : Land Pattern C : Chip Resistor A B A [ Unit : mm ] Reflow Soldering Size(mil) A B 2A + B C RC0402(01005) 017 0.20 0.54 0.18 RC0603(0201) 0.37 0.28 1.02 0.29 RC1005(0402) 0.60 0.50 1.70 0.50 RC1608(0603) 0.80 0.80 2.40 0.80 RC2012(0805) 0.90 1.40 3.20 1.20 RC3216(1206) 1.30 1.80 4.40 1.50 RC3225(1210) 1.30 1.80 4.40 2.40 RC5025(2010) 1.40 3.30 6.10 2.40 RC6432(2512) 1.40 4.60 7.40 3.00

Thick Film Chip Resistors (RC General) ■ Performance Characteristics Requirements Test Conditions ITEM Specification (JIS C 5201-1) Within the specified Resistance JIS C 5201-1 4.5 tolerance Within the specified JIS C 5201-1 4.8 Temperature Characteristic T.C.R +20℃ → -55℃ / +20℃ → +125℃ JIS C 5201-1 4.13 Short time Overload ΔR < ±1%+0.1Ω Rated Voltage×2.5, 5sec JIS C 5201-1 4.17 Solderability Immersed over 95% Rosin Ethanol (25%WT) 245+5/-0℃, 2±0.5 sec JIS C 5201-1 4.18 Resistance to Solder Heat ΔR < ±1%+0.1Ω 260±5℃, 10±1 sec Temperature JIS C 5201-1 4.19 ΔR < ±1%+0.1Ω Cycle -55℃ ↔ +125℃, 100 cycle JIS C 5201-1 4.24 Moisture Resistance ΔR < ±3%+0.1Ω 40±2℃, 90~95%RH, 1,000+48hours 90mins ON, 30mins OFF JIS C 5201-1 4.25 Load Life ΔR < ±3%+0.1Ω Rated Voltage, 70±2℃, 1,000+48hours 90mins ON, 30mins OFF JIS C 5201-1 4.23 High Temp. Exposure ΔR < ±3%+0.1Ω 155±2℃, 1,000+48hours ※ The reliability test condition can be replaced by the corresponding accelerated test condition.

Thick Film Chip Resistors (RC General) Product specifications included in the specifications are effective as of January 04, 2019. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.