DATA SHEET GENERAL PURPOSE CHIPRESISTORS RC0402 5%, 1% RoHS compliant 3 0 0 2 6, 0 r. a M of e t a D s e d e s r e p u S 4 V. 9 0 0 2 1, 2 ul J – n o ti a c cifi e p s t c u d o r P

Product specification 2 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes Both part numbers are identified by the series, size, tolerance, packing RC0402 series chip resistors type, temperature coefficient, taping reel and resistance value. with lead-free terminations made YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee by thick film process. GLOBAL PART NUMBER (PREFERRED) RC0402 X R - XX XXXX L APPLICATIONS (1) (2) (3) (4) (5) (6) (cid:122) All general purpose application (1) TOLERANCE F = ±1% FEATURES J = ±5% (for Jumper ordering, use code of J) (cid:122) Halogen Free Epoxy (2) PACKAGING TYPE (cid:122) RoHS compliant R = Paper / PE taping reel - Products with lead free terminations meet RoHS (3) TEMPERATURE COEFFICIENT OF RESISTANCE requirements – = Base on spec - Pb-glass contained in electrodes, resistor element and glass are (4) TAPING REEL exempted by RoHS 07 = 7 inch dia. Reel (cid:122) Reducing environmentally 10 = 10 inch dia. Reel hazardous wastes 13 = 13 inch dia. Reel (cid:122) High component and equipment (5) RESISTANCE VALUE reliability There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need (cid:122) Saving of PCB space to mention the last zero after R/K/M, e.g.1K2, not 1K20. (cid:122) None forbidden-materials used Detailed resistance rules show in table of “Resistance rule of global part number”. in products/production (6) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule ofglobal part ORDERING EXAMPLE number The ordering code of a RC0402 Resistance code rule Example chip resistor, value 56 X with D1 D1 = Dummy ±1% tolerance, supplied in 7-inch tape reel is: RC0402FR-0756RL. 0R 0R = Jumper 1R = 1 Ω NOTE XRXX 1R5 = 1.5 Ω (1 to 9.76 Ω) 1. All our RSMD products meet RoHS 9R76 = 9.76 Ω compliant and Halogen Free. "LFP" of XXRX 10R = 10 Ω the internal 2D reel label mentions (10 to 97.6 Ω) 97R6 = 97.6 Ω "Lead Free Process" XXXR 2. On customized label, "LFP" or specific 100R = 100 Ω (100 to 976 Ω) symbol can be printed XKXX 1K = 1,000 Ω (1 to 9.76 KΩ) 9K76 = 9760 Ω XMXX 1M = 1,000,000 Ω (1 to 9.76 MΩ) 9M76= 9,760,000 Ω www.yageo.com Jul 21, 2009 V.4

Product specification 3 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 PP HH YYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2322 XXX XXXXX L Last digit of 12NC (1) (2) (3) (4) Resistance decade (3) Last digit TYPE/ START TOL. RESISTANCE PAPER / PE TAPE ON REEL (units) (2) 0.01 to 0.0976 X 0 0402 IN (1) (%) RANGE 10,000 20,000/not preferred 50,000 0.1 to 0.976 X 7 RC31 2322 ±5% 1 to 22 MΩ 705 70xxx --- 705 87xxx 1 to 9.76 X 8 RC32 2322 ±1% 1 to 10 MΩ 706 7xxxx --- 706 8xxxx 10 to 97.6 X 9 Jumper 2322 - 0 Ω 705 91001 --- 705 91007 100 to 976 X 1 1 to 9.76 KX 2 (1) The resistors have a 12-digit ordering code starting with 2322. 10 to 97.6 KX 3 ( 2) The subsequent 4 or 5 digits indicate the resistor tolerance and 100 to 976 KX 4 packaging. 1 to 9.76 MX 5 (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of 10 to 97.6 MX 6 “Last digit of 12NC”. Example: 0.02 X = 0200 or 200 (4) Letter L is system default code for order only (Note) 0.3 X = 3007 or 307 ORDERING EXAMPLE 1 X = 1008 or 108 The ordering code of a RC32 resistor, value 56 X with ±1% tolerance, 33 KX = 3303 or 333 supplied in tape of 10,000 units per reel is: 232270675609L or 10 MX = 1006 or 106 RC0402FR-0756RL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed www.yageo.com Jul 21, 2009 V.4

Product specification 4 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 MARKING RC0402 No marking ynsc007 Fig. 1 For further marking information, please see special data sheet “Chip resistors marking” CONSTRUCTION The resistor is constructed on top OOUUTTLLIINNEESS of a high-grade ceramic body. For dimension see Table1 Internal metal electrodes are added overcoat on each end to make the contacts to the thick film resistive element. The Primary glass layer resistive layer(cid:31) composition of the resistive element (Jumper chip is a conductor) is a noble metal imbedded into a inner electrode H glass and covered by a second glass termination(Ni/matte tin) to prevent environment influences. ceramic substrate I2 The resistor is laser trimmed to the rated resistance value. The resistor overcoat is covered with a protective epoxy I1 coat, finally the two external terminations (matte tin on Ni- barrier) are added. See fig.2 W YNSC056 DIMENSIONS L Table 1 TYPE RC0402 Fig. 2 Chip resistor outlines L (mm) 1.00 ±0.05 W (mm) 0.50 ±0.05 H (mm) 0.32 ±0.05 I1 (mm) 0.20 ±0.10 I2 (mm) 0.25 ±0.10 www.yageo.com Jul 21, 2009 V.4

Product specification 5 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 ELECTRICAL CHARACTERISTICS FOOTPRINT AND SOLDERING Table 2 PROFILES CHARACTERISTICS RC0402 1/16 W For recommended footprint and soldering profiles, please see the Operating Temperature Range –55 °C to +155 °C special data sheet “Chip resistors Maximum Working Voltage 50 V mounting”. Maximum Overload Voltage 100 V Dielectric Withstanding Voltage 100 V 5% (E24) 1 Ω to 22 MΩ Resistance Range 1% (E24/E96) 1 Ω to 10 MΩ Zero Ohm Jumper < 0.05 Ω 1 Ω ≤ R ≤ 10 Ω ±200 ppm/°C Temperature Coefficient 10 Ω < R ≤ 10 MΩ ±100 ppm/°C 10 MΩ < R ≤ 22 MΩ ±200 ppm/°C Rated Current 1.0 A Jumper Criteria Maximum Current 2.0 A PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL RC0402 Paper Taping Reel (R) 7" (178 mm) 10,000 units 10" (254 mm) 20,000 units 13" (330 mm) 50,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing” FUNCTIONAL DESCRIPTION PPOOWWEERR RRAATTIINNGG RC0402 rated power at 70°C is 1/16 W handbook, halfpage P MLB206_2 RATED VOLTAGE (%Pr a t e d ) 100 The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by 50 the following formula: V=√(P X R) 0 55 0 50 70 100 155 or max. working voltage whichever is less Tamb( o C) Where V=Continuous rated DC or Fig. 3 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T ) AC (rms) working voltage (V) amb P=Rated power (W) R=Resistance value (X) www.yageo.com Jul 21, 2009 V.4

Product specification 6 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature IEC 60115-1 4.8 At +25/–55 °C and +25/+125 °C Refer to table 2 Coefficient of Resistance Formula: (T.C.R.) R –R T.C.R= ----------2-------1-------- ×106 (ppm/°C) R (t –t ) 1 2 1 Where t =+25 °C or specified room temperature 1 t =–55 °C or +125 °C test temperature 2 R =resistance at reference temperature in ohms 1 R =resistance at test temperature in ohms 2 Life/Endurance IEC 60115-1 4.25.1 At 70±5 °C for 1,000 hours, RCWV applied for ±(1.0%+0.05 Ω) for 1% tol. 1.5 hours on, 0.5 hour off, still air required ±(3.0%+0.05 Ω) for 5% tol. <100 mΩ for Jumper High IEC 60068-2-2 1,000 hours at 155±5 °C, unpowered ±(1.0%+0.05 Ω) for 1% tol. Temperature ±(2.0%+0.05 Ω) for 5% tol. Exposure/ <50 mΩ for Jumper Endurance at Upper Category Temperature Moisture MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8 ±(0.5%+0.05 Ω) for 1% tol. Resistance hours, 3 cycles / 24 hours for 10d. with 25 °C / ±(2.0%+0.05 Ω) for 5% tol. 65 °C 95% R.H, without steps 7a & 7b, <100 mΩ for Jumper unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion Thermal Shock MIL-STD-202G Method-107G -55/+125 °C ±(0.5%+0.05 Ω) for 1% tol. Number of cycles required is 300. Devices ±(1%+0.05 Ω) for 5% tol. unmounted <50 mΩ for Jumper Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air Short Time IEC60115-1 4.13 2.5 times of rated voltage or maximum overload ±(1.0%+0.05 Ω) for 1% tol. Overload voltage whichever is less for 5 sec at room ±(2.0%+0.05 Ω) for 5% tol. temperature <50 mΩ for Jumper No visible damage www.yageo.com Jul 21, 2009 V.4

Product specification 7 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex/ IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin ±(1.0%+0.05 Ω) for 1%, 5% tol. Bending PCB (FR4) <50 mΩ for Jumper 5 mm bending No visible damage Bending time: 60±5 seconds Low IEC 60068-2-1 The resistor shall be subjected to a DC rated ±(0.5%+0.05 Ω) for 1% tol . Temperature voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C ±(1.0%+0.05 Ω) for 5% tol. Operation This constitutes shall be repeated for 96 hours No visible damage However the applied voltage shall not exceed the maximum operating voltage Insulation IEC 60115-1 4.6 Rated continuous overload voltage (RCOV) ≥10 GΩ Resistance for 1 minute Type RC0402 Voltage (DC) 100 V Dielectric IEC 60115-1 4.7 Maximum voltage (V ) applied for 1 minute No breakdown or flashover rms Withstand Type RC0402 Voltage Voltage (AC) 100 V rms Resistance to IPC/JEDEC J-STD-020D lsopropylalcohol (C H OH) followed by No smeared 3 7 Solvent brushing Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range Value R < 100 Ω 10 dB 100 Ω ≤ R < 1 KΩ 20 dB 1 KΩ ≤ R < 10 KΩ 30 dB 10 KΩ ≤ R < 100 KΩ 40 dB 100 KΩ ≤ R < 1 MΩ 46 dB 1 MΩ ≤ R ≤ 22 MΩ 48 dB Biased Humidity IEC 60115-1 4.37 Steady state for 1000 hours at 40 °C / 95% R.H. ±(1.0%+0.05 Ω) for 1% tol. (steady state) RCWV applied for 1.5 hours on and ±(2.0%+0.05 Ω) for 5% tol. 0.5 hour off <100 mΩ for Jumper www.yageo.com Jul 21, 2009 V.4

Product specification 8 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 TEST TEST METHOD PROCEDURE REQUIREMENTS Intermittent IEC 60115-1 4.39 2.5 times of rated voltage or maximum ±(1.0%+0.05 Ω) for 1% tol. Overload overload voltage whichever is less for 1 second ±(2.0%+0.05 Ω) for 5% tol. on and 25 seconds off; total 10,000 cycles <100 mΩ for Jumper Solderability - Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Well tinned (≥95% covered) Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching IPC/JEDEC J-STD-002B test D Leadfree solder, 260 °C, 30 seconds No visible damage immersion time - Resistance to IEC 60068-2-58 Condition B, no pre-heat of samples ±(0.5%+0.05 Ω) for 1% tol . Soldering Heat Leadfree solder, 260 °C, 10 seconds ±(1.0%+0.05 Ω) for 5% tol. immersion time <50 mΩ for Jumper Procedure 2 for SMD: devices fluxed and No visible damage cleaned with isopropanol www.yageo.com Jul 21, 2009 V.4

Product specification 9 Chip Resistor Surface Mount RC SERIES 0402 (RoHS Compliant) 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 4 Jul 21, 2009 - - Test Items and methods updated - Test requirements upgraded Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC0402 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number Version 2 Sep 03, 2004 - - New datasheet for 0402 thick film 1% and 5% with lead-free terminations - Replace the 0402 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10 - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Jul 21, 2009 V.4