General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Overview Applications The R82 is constructed of metallized polyester film (wound Typical applications include blocking, coupling, decoupling, or stacked technology) with radial leads of tinned wire. timing, and oscillator circuits. Not suitable for across-the- Radial leads are electrically welded to the contact metal line application (see Suppressor Capacitors). layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94 V–0 requirements. Automotive grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Voltage range: 50 – 400 VDC • Capacitance range: 0.001 – 4.7 µF • Lead Spacing: 5 mm • Capacitance tolerance: ±5%, ±10%, ±20% • Climatic category: 55/105/56 • Operating temperature range of −55°C to +105°C • RoHS compliance and lead-free terminations • Tape & Reel packaging in accordance with IEC 60286–2 • Self-healing • Automotive grade (AEC–Q200) Part Number System R82 D C 3470 AA 60 J Rated Voltage Capacitance Capacitance Series Length (mm) Packaging Internal Use (VDC) Code (pF) Tolerance Metallized C = 50 C = 5.0 The last three See Ordering 30 J = ±5% Polyester D = 63 digits represent Options Table 50 K = ±10% E = 100 significant figures. 60 M = ±20% I = 250 First digit specifies 70 M = 400 the number of zeros to be added. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Ordering Options Table Lead Spacing Lead and LL Lead Length Nominal Type of Leads and Packaging Packaging (mm) (mm) Code Standard Lead and Packaging Options Bulk (Bag) – Short leads 4 +1.5/−0 AA Ammo Pack H = 18.5 ±0.5 DQ 0 Other Lead and Packaging Options Tape & Reel (Standard Reel Ø 355 mm) H = 18.5 ±0.5 CK 5 0 Bulk (Bag) – Short leads 2.7 +0.5/−0 JA Bulk (Bag) – Short leads 3.5 +0.5/−0 JB Bulk (Bag) – Short leads 10 ±1 JC Bulk (Bag) – Short leads 4.0 +0.5/−0 JE Bulk (Bag) – Short leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long leads 17 +1/−2 Z3 Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL 0.5 p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 ±0.4 2.5 +0.1 6.5 +0.1 7.2 +0.2 0.5 ±0.05 5.0 ±0.4 3.5 +0.1 7.5 +0.1 7.2 +0.2 0.5 ±0.05 5.0 ±0.4 4.5 +0.1 9.5 +0.1 7.2 +0.3 0.5 ±0.05 5.0 ±0.4 5.0 +0.1 10.0 +0.1 7.2 +0.3 0.5 ±0.05 5.0 ±0.4 6.0 +0.1 11.0 +0.1 7.2 +0.3 0.5 ±0.05 5.0 ±0.4 7.2 +0.1 13.0 +0.1 7.2 +0.3 0.6 ±0.05 Note: See Ordering Options Table for lead length (LL/H) options. 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Performance Characteristics Dielectric Polyester film (polyethylene terephthalate). Plates Metal layer deposited by evaporation under vacum. Winding Non-inductive type. Leads Tinned wire. Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to Protection UL94. Related Documents IEC 60384–2 Rated Voltage V (VDC) 50 63 100 250 250 400 400 R Rated Voltage V (VAC) 30 40 63 140 160 160 200 R 0.022 – 0.0068 – 0.0068 – 0.001 – Capacitance Range (µF) 2.2 – 4.7 0.1 – 1.5 0.001 – 1 0.22 0.15 0.068 0.047 Capacitance Values E6 series (IEC 60063) measured at 1 kHz and +20 ±1°C Capacitance Tolerance ±5%, ±10%, ±20% Operating Temperature −55°C to 105°C Range Rated Temperature T +85°C R Voltage Derating Above +85°C DC and AC voltage derating is 1.25%/°C Climatic Category 55/105/56 IEC 60068–1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Test Voltage 1.4 x V VDC for 2 seconds (between terminations) at +25°C ±5°C R Maximum 3% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% Capacitance Drift to 60% Operational life > 200,000 hours Reliability Failure rate ≤ 1 FIT, T = +40°C, V = 0.5 x V (Reference MIL-HDBK-217) R Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the catalog limits, IR < 0.005 x initial limit dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <V ), the specified dv/dt Maximum Pulse Steepness R can be multiplied by the factor V /Vpp R Temperature Coefficient +400 (±200) ppm/°C at 1 kHz Self Inductance Approximately 7 nH. Maximum 1nH per 1 mm lead and capacitor length. (Lead Length ~ 2 mm) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Performance Characteristics cont. Maximum Values at 25°C ±5°C Frequency C ≤ 0.1 μF C > 1 µF Dissipation Factor tanδ 1 kHz 0.80% 0.80% 10 kHz 1.20% 1.20% 100 kHz 2.50% – Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Voltage charge/time C ≤ 0.33 μF 0.33 µF < C ≤ 1.0 μF C > 1.0 μF Insulation Resistance 50 VDC for V ≤ 100 VDC R ≥ 15,000 MΩ ≥ 5,000 MΩ • µF ≥ 1,000 MΩ • µF 1 minute 100 VDC for V > 100 VDC R ≥ 30,000 MΩ 1 minute Maximum Humidity in Storage Conditions 100 90 ) % ( 80 y t 70 i d i 60 m u 50 H 40 e v 30 i t la 20 30 Days e R 10 Annual Average 0 −40 −20 0 20 40 60 80 Temperature (°C) Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Maximum Voltage (V ) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) rms Lead Spacing 5 mm 50 VDC/30 VAC 63 VDC/40 VAC 100 100 V [V]rms V [V]rms 10 10 0.1 µF p = 5 0.47 µF p = 5 2.2 µF p = 5 1 µF p = 5 4.7 µF p = 5 1 1 0.1 1 f [kHz] 10 100 0.1 1 f [kHz] 10 100 100 VDC/63 VAC 100 V [V]rms 0.01 µF p = 5 10 0.047 µF p = 5 0.33 µF p = 5 1 0.1 1 f [kHz] 10 100 250 VDC/140 VAC - Reduced Sizes 250 VDC/160 VAC 1000 1000 100 100 V [V]rms V [V]rms 10 00.0.2022.21 µ µµFFF p pp = == 555 10 000...0011457 µµµFFF ppp === 555 1 0.1 1 f [kHz] 10 100 1 0.1 1 f [kHz] 10 100 400 Vdc / 160 Vac -Reduced Sizes 400 VDC/200 VAC 1000 1000 100 100 V [V]rms V [V]rms 10 0.00.006185 µµFF pp == 55 10 0.000.0417 µµFF pp == 55 0.047 µF p = 5 0.047 µF p = 5 10.1 1 f [kHz] 10 100 10.1 1 f [kHz] 10 100 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Maximum Current (I ) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) rms Lead Spacing 5 mm 50 VDC /30 VAC 63 VDC/40 VAC 10 10 1 1 I [A]rms I [A]rms 2.2 µF p = 5 0.1 4.7 µF p = 5 0.1 0.1 µF p = 5 0.47 µF p = 5 1 µF p = 5 0.01 0.01 0.1 1 f [kHz] 10 100 0.1 1 f [kHz] 10 100 100 VDC/63 VAC 10 1 0.01 µF p = 5 I [A]rms 0.00.4373 µµFF pp == 55 0.1 0.01 0.1 1 f [kHz] 10 100 250 VDC/140 VAC - Reduced Sizes 250 VDC/160 VAC 10 10 1 1 I [A]rms I [A]rms 0.1 0.1 000...0122 2 2 µµµFFF ppp === 555 000...0011457 µµµFFF ppp === 555 0.010.1 1 f [kHz] 10 100 0.010.1 1 f [kHz] 10 100 400 VDC/160 VAC - Reduced Sizes 400 VDC/200 VAC 10 10 1 1 0.0068 µF p = 5 0.0047 µF p = 5 0.015 µF p = 5 0.01 µF p = 5 I [A]rms 0.047 µF p = 5 I [A]rms 0.047 µF p = 5 0.1 0.1 0.01 0.01 0.1 1 f [kHz] 10 100 0.1 1 f [kHz] 10 100 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Environmental Test Data Damp Heat, Steady Test Conditions: Performances State Test Temperature: +40°C ±2°C Δ C/C ≤ 5%, Relative humidity (RH): 93% ±2% Δ tanδ ≤ 0.5% at 1 kHz Test duration: 56 days IR after test ≥ 50% of initial limit Endurance Test Test Conditions Performances Δ C/C ≤ 5%, Temperature: +105°C ±2°C Δ tanδ ≤ 0.003 at 10 kHz for C ≤ 1 µF Voltage applied: 1.25 x V C Δ tanδ ≤ 0.002 at 1 kHz for C > 1 µF Test duration: 2,000 hours IR after test ≥ 50% of initial limit Resistance to Soldering Test Conditions Performances Heat Test |Δ C/C| ≤ 2%, Solder bath temperature: 260°C ±5°C Δ tanδ ≤ 0.003 at 10 kHz for C ≤ 1µF Dipping time (with heat Δ tanδ ≤ 0.002 at 1 kHz for C > 1µF screen): 10 seconds ±1 second IR after test ≥ initial limit Environmental Compliance All KEMET MKT capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Dimensions in mm dV/dt Capacitance Lead Maximum K New KEMET Legacy Part VDC VAC (V/ 0 Value (µF) B H L Spacing (V2/µs) Part Number Number µs) 50 30 2.2 6.0 11.0 7.2 5.0 100 10000 82CC4220(1)70(2) R82CC4220(1)70(2) 50 30 3.3 7.2 13.0 7.2 5.0 25 2500 82CC4330(1)30(2) R82CC4330(1)30(2) 50 30 4.7 7.2 13.0 7.2 5.0 25 2500 82CC4470(1)30(2) R82CC4470(1)30(2) 63 40 0.10 2.5 6.5 7.2 5.0 160 20160 82DC3100(1)50(2) R82DC3100(1)50(2) 63 40 0.15 2.5 6.5 7.2 5.0 160 20160 82DC3150(1)60(2) R82DC3150(1)60(2) 63 40 0.22 2.5 6.5 7.2 5.0 160 20160 82DC3220(1)60(2) R82DC3220(1)60(2) 63 40 0.33 3.5 7.5 7.2 5.0 160 20160 82DC3330(1)60(2) R82DC3330(1)60(2) 63 40 0.47 3.5 7.5 7.2 5.0 160 20160 82DC3470(1)60(2) R82DC3470(1)60(2) 63 40 0.68 4.5 9.5 7.2 5.0 160 20160 82DC3680(1)60(2) R82DC3680(1)60(2) 63 40 1.0 5.0 10.0 7.2 5.0 160 20160 82DC4100(1)60(2) R82DC4100(1)60(2) 63 40 1.5 6.0 11.0 7.2 5.0 160 20160 82DC4150(1)60(2) R82DC4150(1)60(2) 100 63 0.0010 2.5 6.5 7.2 5.0 200 40000 82EC1100(1)50(2) R82EC1100(1)50(2) 100 63 0.0015 2.5 6.5 7.2 5.0 200 40000 82EC1150(1)50(2) R82EC1150(1)50(2) 100 63 0.0022 2.5 6.5 7.2 5.0 200 40000 82EC1220(1)50(2) R82EC1220(1)50(2) Capacitance H Lead dV/dt Max K New KEMET Legacy VDC VAC B (mm) L (mm) 0 Value (µF) (mm) Spacing (V/µs) (V2/µs) Part Number Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%, M = 20% Bold denotes wound capacitor technology © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. Dimensions in mm dV/dt Capacitance Lead Maximum K New KEMET Legacy Part VDC VAC (V/ 0 Value (µF) B H L Spacing (V2/µs) Part Number Number µs) 100 63 0.0033 2.5 6.5 7.2 5.0 200 40000 82EC1330(1)50(2) R82EC1330(1)50(2) 100 63 0.0047 2.5 6.5 7.2 5.0 200 40000 82EC1470(1)50(2) R82EC1470(1)50(2) 100 63 0.0068 2.5 6.5 7.2 5.0 200 40000 82EC1680(1)50(2) R82EC1680(1)50(2) 100 63 0.010 2.5 6.5 7.2 5.0 200 40000 82EC2100(1)50(2) R82EC2100(1)50(2) 100 63 0.015 2.5 6.5 7.2 5.0 200 40000 82EC2150(1)50(2) R82EC2150(1)50(2) 100 63 0.022 2.5 6.5 7.2 5.0 200 40000 82EC2220(1)50(2) R82EC2220(1)50(2) 100 63 0.033 2.5 6.5 7.2 5.0 200 40000 82EC2330(1)50(2) R82EC2330(1)50(2) 100 63 0.047 2.5 6.5 7.2 5.0 200 40000 82EC2470(1)60(2) R82EC2470(1)60(2) 100 63 0.068 2.5 6.5 7.2 5.0 200 40000 82EC2680(1)60(2) R82EC2680(1)60(2) 100 63 0.10 2.5 6.5 7.2 5.0 200 40000 82EC3100(1)70(2) R82EC3100(1)70(2) 100 63 0.15 3.5 7.5 7.2 5.0 200 40000 82EC3150(1)70(2) R82EC3150(1)70(2) 100 63 0.22 3.5 7.5 7.2 5.0 200 40000 82EC3220(1)70(2) R82EC3220(1)70(2) 100 63 0.33 4.5 9.5 7.2 5.0 200 40000 82EC3330(1)70(2) R82EC3330(1)70(2) 100 63 0.47 4.5 9.5 7.2 5.0 200 40000 82EC3470(1)70(2) R82EC3470(1)70(2) 100 63 0.68 5.0 10.0 7.2 5.0 200 40000 82EC3680(1)70(2) R82EC3680(1)70(2) 100 63 1.00 6.0 11.0 7.2 5.0 200 40000 82EC4100(1)70(2) R82EC4100(1)70(2) 250 140 0.022 2.5 6.5 7.2 5.0 130 65000 82IC2220(1)60(2) R82IC2220(1)60(2) 250 140 0.047 3.5 7.5 7.2 5.0 130 65000 82IC2470(1)60(2) R82IC2470(1)60(2) 250 140 0.068 3.5 7.5 7.2 5.0 130 65000 82IC2680(1)60(2) R82IC2680(1)60(2) 250 140 0.10 4.5 9.5 7.2 5.0 130 65000 82IC3100(1)60(2) R82IC3100(1)60(2) 250 140 0.15 5.0 10.0 7.2 5.0 130 65000 82IC3150(1)60(2) R82IC3150(1)60(2) 250 140 0.22 6.0 11.0 7.2 5.0 130 65000 82IC3220(1)60(2) R82IC3220(1)60(2) 250 160 0.0068 2.5 6.5 7.2 5.0 250 125000 82IC1680(1)50(2) R82IC1680(1)50(2) 250 160 0.010 2.5 6.5 7.2 5.0 250 125000 82IC2100(1)50(2) R82IC2100(1)50(2) 250 160 0.015 2.5 6.5 7.2 5.0 250 125000 82IC2150(1)50(2) R82IC2150(1)50(2) 250 160 0.022 3.5 7.5 7.2 5.0 250 125000 82IC2220(1)50(2) R82IC2220(1)50(2) 250 160 0.033 3.5 7.5 7.2 5.0 250 125000 82IC2330(1)50(2) R82IC2330(1)50(2) 250 160 0.047 4.5 9.5 7.2 5.0 250 125000 82IC2470(1)50(2) R82IC2470(1)50(2) 250 160 0.068 4.5 9.5 7.2 5.0 250 125000 82IC2680(1)50(2) R82IC2680(1)50(2) 250 160 0.10 5.0 10.0 7.2 5.0 250 125000 82IC3100(1)55(2) R82IC3100(1)55(2) 250 160 0.15 6.0 11.0 7.2 5.0 250 125000 82IC3150(1)50(2) R82IC3150(1)50(2) 400 160 0.0068 2.5 6.5 7.2 5.0 200 160000 82MC1680(1)60(2) R82MC1680(1)60(2) 400 160 0.015 3.5 7.5 7.2 5.0 200 160000 82MC2150(1)60(2) R82MC2150(1)60(2) 400 160 0.033 4.5 9.5 7.2 5.0 200 160000 82MC2330(1)60(2) R82MC2330(1)60(2) 400 160 0.047 5.0 10.0 7.2 5.0 200 160000 82MC2470(1)60(2) R82MC2470(1)60(2) 400 160 0.068 6.0 11.0 7.2 5.0 200 160000 82MC2680(1)60(2) R82MC2680(1)60(2) 400 200 0.0010 2.5 6.5 7.2 5.0 400 320000 82MC1100(1)50(2) R82MC1100(1)50(2) 400 200 0.0015 2.5 6.5 7.2 5.0 400 320000 82MC1150(1)50(2) R82MC1150(1)50(2) 400 200 0.0022 2.5 6.5 7.2 5.0 400 320000 82MC1220(1)50(2) R82MC1220(1)50(2) 400 200 0.0033 2.5 6.5 7.2 5.0 400 320000 82MC1330(1)50(2) R82MC1330(1)50(2) 400 200 0.0047 2.5 6.5 7.2 5.0 400 320000 82MC1470(1)50(2) R82MC1470(1)50(2) 400 200 0.0068 3.5 7.5 7.2 5.0 400 320000 82MC1680(1)50(2) R82MC1680(1)50(2) 400 200 0.010 3.5 7.5 7.2 5.0 400 320000 82MC2100(1)50(2) R82MC2100(1)50(2) 400 200 0.015 4.5 9.5 7.2 5.0 400 320000 82MC2150(1)50(2) R82MC2150(1)50(2) 400 200 0.022 4.5 9.5 7.2 5.0 400 320000 82MC2220(1)50(2) R82MC2220(1)50(2) 400 200 0.033 5.0 10.0 7.2 5.0 400 320000 82MC2330(1)50(2) R82MC2330(1)50(2) 400 200 0.047 6.0 11.0 7.2 5.0 400 320000 82MC2470(1)50(2) R82MC2470(1)50(2) Capacitance H Lead dV/dt Max K New KEMET Legacy VDC VAC B (mm) L (mm) 0 Value (µF) (mm) Spacing (V/µs) (V2/µs) Part Number Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%, M = 20% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2, serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual 2 +3 seconds maximum 260°C soldering with a soldering iron. 250 First Wave Second Wave 200 Recommended Soldering Temperature C) ∆T < 150°C Cooling 345000 mperature (°150 Prehea1ti1n5g°C max cccaaa 235.°°5CC°//Css/eescceoocnnoddnd typical Soldering Iron Bit Temperature (°C)112230505000000 Te105000 0 Tpreheat 40 80 100°C T1i2m0e (s) Typical160 200 240 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1. Maximum Maximum Preheat Peak Soldering Dielectric Temperature Temperature Film Material Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene 150°C 160°C 270°C 270°C Sulphide 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Maximum temperature Dielectric Film Material measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

FILM WINDING SCHEME OPTIONS Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Single-sided Film Film Carrier Metallized Film Polypropylene Film 1 Section 2 Sections 1 Section 2 Sections Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Film Through-Hole Capacitors –M Geetanlelirzaeld P urpose Metallized Polyester Film CapMaceittaollrisze d Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Single-sided R82, Radial, 5 mm Lead Spacing, 50F i–lm 400 VDC (Automotive Grade) Film Carrier Metallized Film Polypropylene Film Construction 3 Sections 4 Sections 3 Sections 4 Sections Wound Detailed Cross Section Molded Plastic Single-sided Metallized Molded Plastic Case Polypropylene Film Case (First Layer) Single-sided Metallized Polypropylene Film Self-Extinguishing (Second Layer) Resin Metallized Impregnated Paper Metallized Polyphenylene Polypropylene Film/Foil Sulfide Film (SMR) Margin Margin Single-sided Metallized Metal Contact Metal Foil Metal Foil Polypropylene Metallized Polypropylene Film Impregnated MetallizedL aPyoelyrphenyl- Film Dielectric Metal Contact Paper ene Sulfide Film with Polypropylene Layer Vacuum-Evaporated Film Dielectric Aluminum Electrodes Margin 1 Section 1 Section 1 Section 2 Sections Leads SingleW-siniddeidn gM eStcalhliezmede Polyester Film AXIAL - Polypropylene Film/Foil Single-sided Polypropylene Single-sided Metallized Film Dielec- Metallized Polyester tric Polypropylene Film Film Polypropylene 1 Section Metal Foil Metal Foil Film Dielectric 1 Section 2 Sections AXIAL - Single-sided Metallized AXIAL - Single-sided Metallized AXIAL - Double-sided Polypropylene Film Polyester Film Metallized Polyester Film Single-sided Single-sided Double-sided Polypropylene Metallized Metallized Metallized Film Dielectric Polypropylene Polyester Polyester Carrier Film Film Film Single-sided Metallized Polypropylene Film 1 Section 1 Section 2 Sections © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Construction cont. Stacked Detailed Cross Section Molded Plastic Case Molded Plastic Case Single-sided Metallized . Polyester Film (First Layer) Self-Extinguishing Resin Single-sided Metallized Polyester Film (Second Layer) Margin Metal Contact Layer Metal Contact Layer Leads © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Marking Wound Stacked TOP TOP . Capacitance Capacitance Voltage Capacitance Capacitance Voltage Tolerance Tolerance OR OR FRONT FRONT Capacitance Capacitance Capacitance Capacitance . Tolerance Tolerance Voltage Voltage Packaging Quantities Thickness Bulk Bulk Standard Reel Ammo Lead Spacing Height (mm) Length (mm) (mm) Short Leads Long Leads 355 mm Taped 2.5 6.5 7.2 3,000 4,000 2,500 3,500 3.5 7.5 7.2 2,000 3,000 1,800 2,500 4.5 9.5 7.2 1,500 2,000 1,400 1,900 5 5.0 10.0 7.2 1,000 1,500 1,200 1,700 6.0 11.0 7.2 2,000 1,000 1,000 1,400 7.2 13.0 7.2 1,500 750 800 1,150 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 — Lead Spacing 5 & 7.5 mm Figure 2 — Lead Spacing 7.5 mm P2 P P P1 P ∆h ∆h P1 ∆h ∆h W 2 W2 A B Ød A B Ød H0 H W 0 W 1 W W 0 W 1 W 0 F P D t 0 0 F P D t 0 0 A−B A−B t t Dimensions (mm) Lead Spacing Description Symbol 5 7.5 7.5 Tolerance Figure 1 Figure 1 Figure 2 Lead wire diameter d 0.5 – 0.6 0.5 – 0.6 0.5 – 0.6 ±0.05 Taping lead space P 12.7 12.7 12.7 ±1 Feed hole lead space P 12.7 12.7 12.7 ±0.2* 0 Centering of the lead wire P 3.85 2.6 3.75 ±0.7 1 Centering of the body P 6.35 6.35 ±1.3 2 Lead spacing F 5 7.5 7.5 +0.6/−0.1 Component alignment Δh 0 0 0 ±2 Height of component from tape H ** 18.5 18.5 18.5 ±0.5 center 0 Carrier tape width W 18 18 18 +1/−0.5 Hold down tape width W 6 6 6 Minimum 0 Hole position W 9 9 9 ±0.5 1 Hold down tape position W 3 3 3 Maximum 2 Feed hole diameter D 4 4 4 ±0.2 0 Tape thickness t 0.7 0.7 0.7 ±0.2 *Maximum 1 mm on 20 lead spaces. **H = 16.5 mm is available upon request. 0 For orders of capacitors with lead space = 7.5 mm, please specify the requested version (Figure 1 or Figure 2). © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) Ammo Specifications Reel Specifications Dimensions in mm Dimensions in mm H W T D H W 360 * 340 59 355 30 55 maximum * Lower dimension available upon request (maximum 295 mm) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors R82, Radial, 5 mm Lead Spacing, 50 – 400 VDC (Automotive Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3101_R82 • 7/8/2019 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: R82CC4220DQ70J R82MC1100DQ50J R82MC1220DQ50J R82CC3560DQ60J R82CC3680AA60J R82CC3680AA60K R82CC3680CK60M R82CC3680DQ60J R82CC3680DQ60K R82CC4100AA60J R82CC4100AA60K R82CC4100CK60J R82CC4100CK60K R82CC4100CK60M R82CC4100DQ60J R82CC4100DQ60K R82CC4100JB60J R82CC4100ZA60J R82CC4150AA60K R82CC4150CK60J R82CC4150CK60K R82CC4150DQ60J R82CC4150DQ60K R82CC4220AA30J R82CC4220AA30K R82CC4220AA70J R82CC4220AA70K R82CC4220CK30J R82CC4220CK30K R82CC4220CK70J R82CC4220CK70K R82CC4220DQ30J R82CC4220DQ30K R82CC4220DQ70K R82CC4220DQ70M R82CC4220JB70M R82CC4220SH70J R82CC4220Z370M R82CC4220ZA70J R82CC4330AA30J R82CC4330AA30K R82CC4330AA30M R82CC4330CK30J R82CC4330CK30K R82CC4330DQ30J R82CC4330DQ30K R82CC4330SH30J R82CC4470AA30J R82CC4470AA30K R82CC4470CK30K R82CC4470DQ30J R82CC4470DQ30K R82CC4470JB30J R82CC4470JB30K R82CC4470JH30J R82CC4470SH30J R82CC4470Z330J R82CC4470Z330M R82DC2820AA50J R82DC2820AA50K R82DC2820DQ50J R82DC2820DQ50K R82DC2820GW50J R82DC2820KT50J R82DC2820SH50J R82DC3100AA50K R82DC3100AA50M R82DC3100BU50K R82DC3100CK50J R82DC3100CK50K R82DC3100CK50M R82DC3100CQ50J R82DC3100CQ50K R82DC3100DN50J R82DC3100DN50K R82DC3100DN50M R82DC3100DQ50K R82DC3100DQ50M R82DC3100FN50M R82DC3100GW50J R82DC3100GW50K R82DC3100JA50J R82DC3100JA50K R82DC3100JB50K R82DC3100JE50J R82DC3100JE50K R82DC3100JF50J R82DC3100JH50J R82DC3100JH50K R82DC3100JL50J R82DC3100JL50K R82DC3100KT50J R82DC3100SH50J R82DC3100SQ50J R82DC3100SW50J R82DC3100Z350J R82DC3100Z350K R82DC3120AA60J R82DC3120CQ60J R82DC3120CQ60K