Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Overview Applications The R46 Series is constructed of metallized polypropylene film For worldwide use in electromagnetic interference (EMI) encapsulated with self-extinguishing resin in a box of material suppression in across-the-line applications requiring X2 safety meeting the requirements of UL 94 V–0. classification. Intended for use in situations where capacitor failure would not result in exposure to electric shock. Not for use in "series with mains" type applications. Benefits • Approvals: ENEC, UL, cUL, CQC • Class X2 (IEC 60384-14) • Rated voltage: 275 VAC 50/60 Hz • Capacitance range: 0.01 – 10 µF • Lead spacing: 10.0 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category: 40/110/56, IEC 60068–1 • Tape and reel in accordance with IEC 60286–2 • RoHS Compliant and lead-free terminations • Operating temperature range of −40˚C to +110˚C • 100% screening factory test at 2,200 VDC/1,500 VAC • Self-healing properties Part Number System R46 K I 2100 00 01 M Rated Voltage Lead Spacing Capacitance Code Capacitance Series Packaging Internal Use (VAC) (mm) (pF) Tolerance X2, Metallized K = 275 F = 10.0 The last three digits See Ordering 01 K = ±10% Polypropylene I = 15.0 represent significant Options Table 02 M = ±20% N = 22.5 figures. The first L2 R = 27.5 digit specifies M1 W = 37.5 number of zeros to M2 be added. N0 N1 N2 One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 1

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Ordering Options Table Lead Spacing Lead Length Lead and Type of Leads and Packaging Nominal (mm) (mm) Packaging Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/-0 00 Ammo Pack H= 18.5 +/-0.5 DQ 0 Other Lead and Packaging Options Tape & Reel (Large Reel) H= 18.5 +/-0.5 CK 0 Bulk (Bag) – Short Leads 2.7 +0.5/-0 JA 10, Bulk (Bag) – Short Leads 3.5 +0.5/-0 JB 15, Bulk (Bag) – Short Leads 4.0 +0.5/-0 JE 22.5 Bulk (Bag) – Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag) – Long Leads 18 +1/-1 JM Bulk (Bag) – Long Leads 30 +5/-0 40 Bulk (Bag) – Long Leads 25 +2/-1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/-0 (sp 8+2/-2) 51 Bulk (Bag) – Insulated Flexible Leads 150 +5/-5 (sp 8+2/-2) 52 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/-0 00 Tape & Reel (Large Reel) H= 18.5 +/-0.5 CK 0 Other Lead and Packaging Options Bulk (Bag) – Short Leads 2.7 +0.5/-0 JA Bulk (Bag) – Short Leads 3.5 +0.5/-0 JB 27.5 Bulk (Bag) – Short Leads 4.0 +0.5/-0 JE Bulk (Bag) – Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag) – Long Leads 18 +1/-1 JM Bulk (Bag) – Long Leads 30 +5/-0 40 Bulk (Bag) – Long Leads 25 +2/-1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/-0 (sp 8+2/-2) 51 Bulk (Bag) – Insulated Flexible Leads 150 +5/-5 (sp 8+2/-2) 52 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/-0 00 Other Lead and Packaging Options Bulk (Bag) – Short Leads 2.7 +0.5/-0 JA Bulk (Bag) – Short Leads 3.5 +0.5/-0 JB 37.5 Bulk (Bag) – Short Leads 4.0 +0.5/-0 JE Bulk (Bag) – Short Leads 3.2 +0.3/-0.2 JH Bulk (Bag) – Long Leads 18 +1/-1 JM Bulk (Bag) – Long Leads 30 +5/-0 40 Bulk (Bag) – Long Leads 25 +2/-1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/-0 (sp 8+2/-2) 51 Bulk (Bag) – Insulated Flexible Leads 150 +5/-5 (sp 8+2/-2) 52 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 2

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Dimensions – Millimeters Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H H d LL p +0/-5 0 ±5 35 15 2 2 ± ± d 8 d 8 p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 +/-0.4 4.0 +0.2 9.0 +0.1 13.0 +0.2 0.6 +/-0.05 10.0 +/-0.4 5.0 +0.2 11.0 +0.1 13.0 +0.2 0.6 +/-0.05 10.0 +/-0.4 6.0 +0.2 12.0 +0.1 13.0 +0.2 0.6 +/-0.05 15.0 +/-0.4 5.0 +0.2 11.0 +0.1 18.0 +0.3 0.6 +/-0.05 15.0 +/-0.4 6.0 +0.2 12.0 +0.1 18.0 +0.3 0.6 +/-0.05 15.0 +/-0.4 6.0 +0.2 17.5 +0.1 18.0 +0.3 0.6 +/-0.05 15.0 +/-0.4 7.5 +0.2 13.5 +0.1 18.0 +0.5 0.6 +/-0.05 15.0 +/-0.4 7.5 +0.2 18.5 +0.1 18.0 +0.5 0.8 +/-0.05 15.0 +/-0.4 8.5 +0.2 14.5 +0.1 18.0 +0.5 0.6 +/-0.05 15.0 +/-0.4 9.0 +0.2 12.5 +0.1 18.0 +0.5 0.6 +/-0.05 15.0 +/-0.4 10.0 +0.2 16.0 +0.1 18.0 +0.5 0.8 +/-0.05 15.0 +/-0.4 11.0 +0.2 19.0 +0.1 18.0 +0.5 0.8 +/-0.05 15.0 +/-0.4 13.0 +0.2 12.0 +0.1 18.0 +0.5 0.8 +/-0.05 22.5 +/-0.4 6.0 +0.2 15.0 +0.1 26.5 +0.3 0.8 +/-0.05 22.5 +/-0.4 7.0 +0.2 16.0 +0.1 26.5 +0.3 0.8 +/-0.05 22.5 +/-0.4 10.0 +0.2 18.5 +0.1 26.5 +0.3 0.8 +/-0.05 22.5 +/-0.4 11.0 +0.2 20.0 +0.1 26.5 +0.3 0.8 +/-0.05 27.5 +/-0.4 9.0 +0.2 17.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 11.0 +0.2 20.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 13.0 +0.2 22.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 13.0 +0.2 25.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 14.0 +0.2 28.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 18.0 +0.2 33.0 +0.1 32.0 +0.3 0.8 +/-0.05 27.5 +/-0.4 22.0 +0.2 37.0 +0.1 32.0 +0.3 0.8 +/-0.05 Note: See Ordering Options Table for lead length (LL/H) options. 0 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 3

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Dimensions – Millimeters cont'd Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H H d LL p +0/-5 0 ±5 35 15 2 2 ± ± d 8 d 8 p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 37.5 +/-0.4 11.0 +0.3 22.0 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 13.0 +0.3 24.0 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 16.0 +0.3 28.5 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 19.0 +0.3 32.0 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 20.0 +0.3 40.0 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 24.0 +0.3 44.0 +0.1 41.5 +0.3 1.0 +/-0.05 37.5 +/-0.4 30.0 +0.3 45.0 +0.1 41.5 +0.3 1.0 +/-0.05 Note: See Ordering Options Table for lead length (LL/H) options. 0 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 4

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Performance Characteristics Dielectric Polypropylene film Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related documents IEC 60384-14, EN 60384-14 Rated Voltage (V ) 275 VAC (50/60 Hz), 560 VDC R Capacitance Range 0.010 µF to 10 µF Capacitance Values E6 series (IEC 60063) measured @ 1 kHz and +20 ±1°C Capacitance Tolerance ±10%, ±20% Temperature Range −40ºC to +110°C Climatic Category 40/110/56 IEC 60068-1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 5

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Performance Characteristics cont'd Dissipation Factor (tanδ) ≤ 0.1% (0.06%*) @ 1 kHz , +25°C ±5°C (* typical value) The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the Test Voltage Between Terminals requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Insulation Resistance Voltage Charge Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF ≥ 1 • 105 MΩ ≥ 30,000 MΩ • µF 100 VDC 1 minute ( ≥ 5 • 105 MΩ )* ( ≥ 150,000 MΩ • µF )* In DC Applications Recommended voltage ≤ 560 VDC * Typical value Impedance Graph © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 6

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Environmental Test Data Test IEC Publication Procedure 1.25 x V VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 Endurance EN/IEC 60384–14 R second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 V + 20 surge pulses at 2.5 kV (pulse every 5 seconds) R Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle flame test Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days Approvals Mark Specification File Number EN/IEC 60384-14 V4413 UL 60384-14 and CAN/CSA E60384-14 E97797 (310VAC) CQC08001026549 CQC11001060118 CQC13001087757 IEC 60384-14 CQC14001116028 CQC13001101266 CQC14001116000 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 7

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Table 1 – Ratings & Part Number Reference Capacitance Dimensions in mm Lead Spacing dV/dt New KEMET Legacy Part Number Value (µF) (p) (V/µs) Part Number B H L 0.010 4.0 9.0 13.0 10.0 500 46KF2100(1)N0(2) R46KF2100(1)N0(2) 0.015 4.0 9.0 13.0 10.0 500 46KF2150(1)N0(2) R46KF2150(1)N0(2) 0.022 4.0 9.0 13.0 10.0 500 46KF2220(1)N0(2) R46KF2220(1)N0(2) 0.033 5.0 11.0 13.0 10.0 500 46KF2330(1)M1(2) R46KF2330(1)M1(2) 0.047 5.0 11.0 13.0 10.0 500 46KF2470(1)N0(2) R46KF2470(1)N0(2) 0.068 6.0 12.0 13.0 10.0 500 46KF2680(1)M1(2) R46KF2680(1)M1(2) 0.10 6.0 12.0 13.0 10.0 500 46KF3100(1)M1(3) R46KF3100(1)M1(3) 0.010 5.0 11.0 18.0 15.0 400 46KI 2100(1)01(2) R46KI 2100(1)01(2) 0.015 5.0 11.0 18.0 15.0 400 46KI 2150(1)01(2) R46KI 2150(1)01(2) 0.022 5.0 11.0 18.0 15.0 400 46KI 2220(1)01(2) R46KI 2220(1)01(2) 0.033 5.0 11.0 18.0 15.0 400 46KI 2330(1)01(2) R46KI 2330(1)01(2) 0.047 5.0 11.0 18.0 15.0 400 46KI 2470(1)01(2) R46KI 2470(1)01(2) 0.068 5.0 11.0 18.0 15.0 400 46KI 2680(1)01(2) R46KI 2680(1)01(2) 0.10 5.0 11.0 18.0 15.0 400 46KI 3100(1)M1(2) R46KI 3100(1)M1(2) 0.15 6.0 12.0 18.0 15.0 400 46KI 3150(1)M2(2) R46KI 3150(1)M2(2) 0.15 9.0 12.5 18.0 15.0 400 46KI 3150(1)L2(2) R46KI 3150(1)L2(2) 0.22 7.5 13.5 18.0 15.0 400 46KI 3220(1)M2(2) R46KI 3220(1)M2(2) 0.22 9.0 12.5 18.0 15.0 400 46KI 3220(1)L2(2) R46KI 3220(1)L2(2) 0.22 6.0 17.5 18.0 15.0 400 46KI 3220(1)02(2) R46KI 3220(1)02(2) 0.33 8.5 14.5 18.0 15.0 400 46KI 3330(1)N0(2) R46KI 3330(1)N0(2) 0.33 10.0 16.0 18.0 15.0 400 46KI 3330(1)M1(2) R46KI 3330(1)M1(2) 0.33 9.0 12.5 18.0 15.0 400 46KI 3330(1)N1(3) R46KI 3330(1)N1(3) 0.33 7.5 18.5 18.0 15.0 400 46KI 3330(1)02(2) R46KI 3330(1)02(2) 0.33 13.0 12.0 18.0 15.0 400 46KI 3330(1)01(2) R46KI 3330(1)01(2) 0.47 7.5 18.5 18.0 15.0 400 46KI 3470(1)02(3) R46KI 3470(1)02(3) 0.47 10.0 16.0 18.0 15.0 400 46KI 3470(1)N0(3) R46KI 3470(1)N0(3) 0.47 11.0 19.0 18.0 15.0 400 46KI 3470(1)M1(2) R46KI 3470(1)M1(2) 0.56 11.0 19.0 18.0 15.0 400 46KI 3560(1)N0(2) R46KI 3560(1)N0(2) 0.60 11.0 19.0 18.0 15.0 400 46KI 3600(1)N0(2) R46KI 3600(1)N0(2) 0.15 6.0 15.0 26.5 22.5 200 46KN3150(1)01(2) R46KN3150(1)01(2) 0.22 6.0 15.0 26.5 22.5 200 46KN3220(1)M1(2) R46KN3220(1)M1(2) 0.33 6.0 15.0 26.5 22.5 200 46KN3330(1)N0(2) R46KN3330(1)N0(2) 0.47 7.0 16.0 26.5 22.5 200 46KN3470(1)N0(2) R46KN3470(1)N0(2) 0.68 10.0 18.5 26.5 22.5 200 46KN3680(1)M2(2) R46KN3680(1)M2(2) 1.00 10.0 18.5 26.5 22.5 200 46KN4100(1)N2(3) R46KN4100(1)N2(3) 1.00 11.0 20.0 26.5 22.5 200 46KN4100(1)N1(2) R46KN4100(1)N1(2) 0.47 9.0 17.0 32.0 27.5 150 46KR3470(1)01(2) R46KR3470(1)01(2) 0.68 9.0 17.0 32.0 27.5 150 46KR3680(1)M1(2) R46KR3680(1)M1(2) 1.0 11.0 20.0 32.0 27.5 150 46KR4100(1)M1(2) R46KR4100(1)M1(2) 1.5 13.0 22.0 32.0 27.5 150 46KR4150(1)M1(2) R46KR4150(1)M1(2) 2.2 13.0 25.0 32.0 27.5 150 46KR4220(1)M2(2) R46KR4220(1)M2(2) 2.2 14.0 28.0 32.0 27.5 150 46KR4220(1)M1(2) R46KR4220(1)M1(2) 3.3 18.0 33.0 32.0 27.5 150 46KR4330(1)M2(2) R46KR4330(1)M2(2) 4.7 18.0 33.0 32.0 27.5 150 46KR4470(1)M2(2) R46KR4470(1)M2(2) 4.7 22.0 37.0 32.0 27.5 150 46KR4470(1)M1(2) R46KR4470(1)M1(2) 1.5 11.0 22.0 41.5 37.5 100 46KW4150(1)M1(2) R46KW4150(1)M1(2) 2.2 11.0 22.0 41.5 37.5 100 46KW4220(1)M2(3) R46KW4220(1)M2(3) 2.2 13.0 24.0 41.5 37.5 100 46KW4220(1)M1(2) R46KW4220(1)M1(2) 3.3 16.0 28.5 41.5 37.5 100 46KW4330(1)M1(2) R46KW4330(1)M1(2) 4.7 16.0 28.5 41.5 37.5 100 46KW4470(1)M2(3) R46KW4470(1)M2(3) 4.7 19.0 32.0 41.5 37.5 100 46KW4470(1)M1(2) R46KW4470(1)M1(2) 6.8 20.0 40.0 41.5 37.5 100 46KW4680(1)M2(2) R46KW4680(1)M2(2) 6.8 24.0 44.0 41.5 37.5 100 46KW4680(1)M1(2) R46KW4680(1)M1(2) 10.0 30.0 45.0 41.5 37.5 100 46KW5100(1)M1(2) R46KW5100(1)M1(2) Lead New KEMET Capacitance Value (µF) B (mm) H (mm) L (mm) dV/dt (V/µs) Legacy Part Number Spacing (p) Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 8

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through- hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual 2+3s max soldering with a soldering iron. 260°C 250 First wave Second wave Recommended Soldering Temperature C)200 400 e (° ΔT <150°C Cooling 350 atur150 Preheating ca 2°C/s ure (deg C)300 Temper100 Tpreheat 115°C max ccaa 35.°5C°/Cs /s typical perat250 100°C Typical m bit te200 50 n o150 g ir n deri100 0 Sol 0 40 80 120 160 200 240 50 Time (s) 0 0 1 2 3 4 5 6 7 8 Soldering time (sec) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 9

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Maximum Maximum Preheat Peak Soldering Temperature Dielectric Temperature Film Material Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch ≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene 150°C 150°C 160°C 270°C 270°C Sulphide 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Maximum temperature Dielectric Film Material measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene 160°C sulphide Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 10

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Construction Detailed Cross Section Molded Plastic Single-sided Metallized Molded Plastic Self-Extinguishing Case Polypropylene Film Case Resin (First Layer) Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Metal Contact Layer Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Winding Scheme Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Carrier Single-sided Film Film Film Metallized Polypropylene Film 1 Section 2 Sections 1 Section 2 Sections Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Carrier Single-sided Film Film Film Metallized Polypropylene Film 3 Sections 4 Sections 3 Sections 4 Sections © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 11 Metallized Impregnated Paper Metallized Polyphenylene Sulfide Film (SMR) Polypropylene Film/Foil Single-sided Metallized Metal Foil Metal Foil Polypropylene Metallized Polypropylene Film Impregnated Metallized Polyphenylene Film Dielectric Paper Sulfide Film with Polypropylene Vacuum-Evaporated Film Dielectric Aluminum Electrodes 1 Section 1 Section 1 Section 2 Sections Single-sided Metallized Polyester Film AXIAL - Polypropylene Film/Foil Single-sided Polypropylene Single-sided Metallized Film Dielectric Metallized Polyester Polypropylene Film Film Polypropylene 1 Section Metal Foil Metal Foil Film Dielectric 1 Section 2 Sections AXIAL - Single-sided Metallized AXIAL - Single-sided Metallized AXIAL - Double-sided Polypropylene Film Polyester Film Metallized Polyester Film Single-sided Single-sided Double-sided Polypropylene Metallized Metallized Metallized Film Dielectric Polypropylene Polyester Polyester Carrier Film Film Film Single-sided Metallized Polypropylene Film 1 Section 1 Section 2 Sections

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Marking Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Plant Passive Flammability Category Lead Spacing 15 mm, 22.5 mm (small case sizes) FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Plant Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm FRONT TOP Series Dielectric Safety Self Code Class Healing Capacitance, Approval Manufacturer’s Capacitance Marks Logo Tolerance, Rated Voltage IEC Climatic QA Number Category © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kePmaests.icvoem F3093_R46_X2_275_110C • 6/9/2016 12 Flammability Manufacturing Date Code Category Plant

Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Plant Passive Flammability Category Lead Spacing 15 mm, 22.5 mm (small case sizes) FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Plant Metallized Polypropylene Film EPMasI sSivuep pFrleasmsmioanb Cilaityp aCcaittoergsory: B for volume ≥ 1750 mm3 R46 Series, Class X2, 275 VAC, 110ºC C for volume < 1750 mm3 Marking cont'd Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm FRONT TOP Series Dielectric Safety Self Code Class Healing Capacitance, Approval Manufacturer’s Capacitance Marks Logo Tolerance, Rated Voltage IEC Climatic QA Number Category Passive Flammability Manufacturing Date Code Category Plant Manufacturing Date Code (IEC 60062) Y = Year, Z = Month Year Code Month Code 2000 M January 1 2001 N February 2 2002 P March 3 2003 R April 4 2004 S May 5 2005 T June 6 2006 U July 7 2007 V August 8 2008 W September 9 2009 X October O 2010 A November N 2011 B December D 2012 C 2013 D 2014 E 2015 F 2016 H 2017 J 2018 K 2019 L 2020 M © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 13

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Packaging Quantities Standard Lead Spacing Thickness Height Length Bulk Bulk Large Reel Ammo Reel (mm) (mm) (mm) (mm) Short Leads Long Leads ø 500 mm Taped ø 355 mm 4 9 13 2000 1800 750 1500 1000 10 5 11 13 1300 1500 600 1250 800 6 12 13 1000 1200 500 1000 680 5 11 18 2000 1000 600 1250 800 6 12 18 1750 900 500 1000 680 6 17.5 18 1000 700 500 1000 680 7.5 13.5 18 1000 700 350 800 500 7.5 18.5 18 900 500 – 800 500 15 8.5 14.5 18 1000 500 300 700 440 9 12.5 18 1000 520 270 650 410 10 16 18 750 500 300 600 380 11 19 18 450 350 – 500 340 13 12 18 750 490 200 480 280 6 15 26.5 805 500 – 700 464 7 16 26.5 700 500 – 550 380 22.5 10 18.5 26.5 396 300 – 350 235 11 20 26.5 360 250 – 350 217 9 17 32 816 408 – 450 – 11 20 32 560 336 – 350 – 13 22 32 480 288 – 300 – 27.5 13 25 32 480 288 – – – 14 28 32 352 176 – – – 18 33 32 256 128 – – – 22 37 32 168 112 – – – 11 22 41.5 420 252 – – – 13 24 41.5 360 216 – – – 16 28.5 41.5 216 108 – – – 37.5 19 32 41.5 192 96 – – – 20 40 41.5 126 84 – – – 24 44 41.5 108 72 – – – 30 45 41.5 90 60 – – – © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 14

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Lead Taping & Packaging (IEC 60286–2) Figure 1 Figure 2 Figure 3 Lead Spacing 10 mm Lead Spacing 15 mm Lead Spacing 22.5 – 27.5 mm P P h h P 2 W2 ød H0 W1 W0 W F P1 P0 D0 t P1 P2 Taping Specifi cation Dimensions (mm) Lead Space Description Symbol 10 15 22.5 27.5 Tol. Fig. 1 Fig. 2 Fig. 3 Fig. 3 Lead wire diameter d 0.6 0.6-0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P 12.7 12.7 12.7 12.7 ±0.2 ** 0 Centering of the lead wire P 7.7 5.2 7.8 5.3 ±0.7 1 Centering of the body P 12.7 12.7 19.05 19.05 ±1.3 2 Lead spacing (pitch) *** F 10 15 22.5 27.5 +0.6/-0.1 Component alignment ∆h 0 0 0 0 ±2 Height of component H **** 18.5 18.5 18.5 18.5 ±0.5 from tape center 0 Carrier tape width W 18 18 18 18 +1 / -0.5 Hold down tape width W 9 10 10 10 Minimum 0 Hole position W 9 9 9 9 ±0.5 1 Hold down tape position W 3 3 3 3 Maximum 2 Feed hole diameter D 4 4 4 4 ±0.2 0 Tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * Also available in 15 mm. ** Max 1 mm on 20 lead spaces. *** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H = 16.5 mm available upon request. 0 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 15

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifi cations Dimensions (mm) H W T 360 340 59 H W T Reel Specifi cations Dimensions (mm) Reel Size D H W Standard 355 30 55 Maximum Large 500 25 D H W © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 16

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC KEMET Corporation Europe Asia World Headquarters Southern Europe Northeast Asia 2835 KEMET Way Sasso Marconi, Italy Hong Kong Simpsonville, SC 29681 Tel: 39-051-939111 Tel: 852-2305-1168 Mailing Address: Skopje, Macedonia Shenzhen, China P.O. Box 5928 Tel: 389-2-55-14-623 Tel: 86-755-2518-1306 Greenville, SC 29606 Beijing, China www.kemet.com Central Europe Tel: 86-10-5877-1075 Tel: 864-963-6300 Landsberg, Germany Fax: 864-963-6521 Tel: 49-8191-3350800 Shanghai, China Tel: 86-21-6447-0707 Corporate Offi ces Kamen, Germany Fort Lauderdale, FL Tel: 49-2307-438110 Seoul, South Korea Tel: 954-766-2800 Tel: 82-2-6294-0550 Northern Europe Taipei, Taiwan North America Wyboston, United Kingdom Tel: 886-2-27528585 Tel: 44-1480-273082 Northeast Wilmington, MA Espoo, Finland Southeast Asia Tel: 978-658-1663 Tel: 358-9-5406-5000 Singapore Tel: 65-6701-8033 Southeast Lake Mary, FL Penang, Malaysia Tel: 407-855-8886 Tel: 60-4-6430200 Central Bangalore, India Novi, MI Tel: 91-806-53-76817 Tel: 248-994-1030 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 17

Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110ºC Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3093_R46_X2_275_110C • 6/9/2016 18

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: R46KN3680CKM1K R46KN3680CKM1M R46KN3680CKM2J R46KN3680CKM2K R46KN3680CKM2M R46KN3680DQM1K R46KN3680DQM1M R46KN3680DQM2K R46KN3680DQM2M R46KN3680JBM1K R46KN3680JBM1M R46KN3680JBM2K R46KN3680JBM2M R46KN3680JBS0M R46KN3680JEM1M R46KN3680JEM2K R46KN3680JHM1K R46KN3680JHM2K R46KN3680JHM2M R46KN3680JLM2R R46KN3680JPM1M R46KN3680JPM2K R46KN3680JPM2M R46KN3680JUM1M R46KN382000M1K R46KN3820JEM1K R46KN410000M1K R46KN410000M1M R46KN410000N1K R46KN410000N1M R46KN410040M1M R46KN410040N1M R46KN410040N2M R46KN410040Z1M R46KN410040Z2M R46KN410045M1K R46KN410045M1M R46KN410045N1K R46KN410045N1M R46KN410045N2M R46KN410050M1K R46KN410050M1M R46KN410050N2M R46KN410052M1M R46KN410055M1K R46KN410055M1M R46KN4100CKN1K R46KN4100DQN1K R46KN4100DQN2M R46KN4100JBM1K R46KN4100JBM1M R46KN4100JBN1K R46KN4100JBN1M R46KN4100JEM1K R46KN4100JEM1M R46KN4100JEN2M R46KN4100JHM1K R46KN4100JHM1M R46KN4100JHN2M R46KN4100JLM1M R46KN4100JPM1M R46KN4100JPN1M R46KN4100JPN2M R46KR422050M1K R46KR4150JBM1K R46KR4100JPM1M R46KR4100JBM1K R46KR4220JBM1K R46KR422000M2M R46KI3100DQS1M R46KR415000M1M R46KF210050N0K R46KI3470JBM1K R46KR368050M1K R46KR4100ZEM1K R46KR415050M1K R46KR422040M2M R46KR433050M2K R46KR447050M2K R46KR410045M1M R46KI23304001K1 R46KI3100CKM1K R46KR415045M1M R46KR422040M2K R46KR422045M1M R46KR422045M2M R46KR422050M2M R46KR4220JHM2M R46KR4220JPM1M R46KI322050S1K R46KI3330JBN0K R46KR34704001M R46KR3470JP01M R46KR368040M1K R46KR368045M1M R46KR4100JEM1K R46KR4100JHM1K R46KR4100JHM1M R46KI21005001K1 R46KI22200001K1