• Qualified with 65kV/µs @ common mode =1KV Features • Isolation 6.4kVDC • Optional continuous short circuit protection DC/DC Converter • Unique transformer system Unregulated • Compact SIP7 package Converters • /X2 version with >9mm input/output clearance RxxP2xx • very low isolation capacitance Description 2 Watt The RxxP2xxS_D series of DC/DC converters are certified to UL/CSA60950-1 and UL/CSA62368-1 as SIP7 well as IEC/EN62368-1 and EN61010-1. This makes them ideal for medical and safety applications where approved isolation is required. The /X2 version has an input/output clearance of more than 9mm. Single and Dual Selection Guide Output Part nom. Input Output Output Efficiency max. Capacitive Number Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] RxxP23.3S (3,4) 5, 12, 15, 24 3.3 600 70 3300 RxxP205S (3,4) 5, 12, 15, 24 5 400 70 - 75 1200 RxxP209S (3,4) 5, 12, 15, 24 9 222 70 - 75 1200 RxxP212S (3,4) 5, 12,15, 24 12 167 70 - 75 680 RxxP215S (3,4) 5, 12, 15, 24 15 133 75 - 80 680 RxxP23.3D (3,4) 5, 12, 15, 24 ±3.3 ±300 70 ±1500 RxxP205D (3,4) 5, 12, 15, 24 ±5 ±200 70 - 75 ±470 RxxP209D (3,4) 5, 12, 15, 24 ±9 ±111 70 - 75 ±470 RxxP212D (3,4) 5, 12,15, 24 ±12 ±83 70 - 75 ±330 RxxP215D (3,4) 5, 12, 15, 24 ±15 ±66 75 - 80 ±330 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient E224736 Note2: Max. Capacitive Load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter EN/IEC62368-1 certified UL/CSA60950-1 certified Model Numbering UL/CSA62368-1 certified EN61010-1 certified EN55032 compliant R__P2 __ _/P/X2 Input Voltage Output Power Pinout (3) Output Voltage Protection (4) Single or Dual Notes: Note3: add suffix „/X2“ for single output with alternative pinout Note4: add suffix „/P“ for continous short circuit protection Ordering Examples: R05P205S/P = 5V Input, 5V Output, Single Output, Continous Short Circuit Protection R05P23.3D/P = 5V Input, 3.3V Output, Dual Output, Continous Short Circuit Protection R05P205S/P/X2 = 5V Input, 5V Output, Single Output, Continous Short Circuit Protection, Alternative Pinout www.recom-power.com/eval-ref-boards www.recom-power.com/bier www.recom-power.com REV.: 6/2018 ECO-1

RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range ±10% Minimum Load (5) 0% Internal Operating Frequency 20kHz 50kHz 85kHz Output Ripple and Noise (6) 20MHz BW 200mVp-p Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Note6: Measurements are made with a 0.1µF MLCC across output (low ESR) Efficiency vs. Load PxxP205S and PxxP209S PxxP205D and PxxP209D 100 100 90 90 80 80 70 70 %] %] y [ 60 y [ 60 c c en 50 en 50 ci ci Effi 40 Effi 40 30 30 R05P205S R05P205D 20 and R12P205S 20 and R12P205D R05P209S R05P209D 10 10 R12P209S R12P209D 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] Output Load [%] PxxP212S and PxxP215S PxxP212D and PxxP215D 100 100 90 90 80 80 70 70 %] %] y [ 60 y [ 60 c c en 50 en 50 ci ci Effi 40 Effi 40 30 30 R05P212S R05P212D 20 R12P212S 20 R12P212D R05P215S R05P215D 10 10 R12P215S R12P215D 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy ±5.0% max. Line Regulation low line to high line, full load 1.2%/1% of Vin typ. 3.3, 5VDC 15% typ. Load Regulation 10% to 100% load 9, 12, 15VDC 10% typ. continued on next page www.recom-power.com REV.: 6/2018 ECO-2

RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Tolerance Envelope ]+10% % [ age +5% Typical Load Line +5% olt Vnom -1.5% V t u -5% p t u O 10 50 100 Load [%] Deviation vs. Load PxxP205S and PxxP209S PxxP205D and PxxP209D 25 25 20 20 15 15 %] 10 %] 10 n [ n [ atio 5 atio 5 vi vi e 0 e 0 D D R05P205S R05P205D -5 -5 R05P209S R05P209D R12P205S R12P205D -10 -10 R12P209S R12P209D -15 -15 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] Output Load [%] PxxP212S and PxxP215S PxxP212D and PxxP215D 25 25 20 20 15 15 %] 10 %] 10 n [ n [ atio 5 atio 5 vi vi e 0 e 0 D D R05P212S R05P212D -5 -5 R05P215S R05P215D R12P212S R12P212D -10 -10 R12P215S R12P215D -15 -15 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] Output Load [%] www.recom-power.com REV.: 6/2018 ECO-3

RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Type Value without Suffix “/P” 1 second Short Circuit Protection (SCP) with Suffix “/P” continuous tested for 1 second 6.4kVDC Isolation Voltage (7) I/P to O/P rated for 1 minute 3.2VAC/60Hz Isolation Resistance 15GΩ min. Isolation Capacitance 1.5pF min. / 10pF max. Insulation Grade basic Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local wiring regulations if input over-current protection is also required. Recommended fuse: T1A slow blow type ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating @ free air convection (see graph) -40°C to +90°C Operating Altitude 2000m Operating Humidity non-condensing 95% RH max. Pollution Degree PD2 Single 2113 x 103 hours +25°C Dual 2434 x 103 hours MTBF according to MIL-HDBK-217F, G.B. Single 299 x 103 hours +85°C Dual 334 x 103 hours Derating Graph (@ Chamber and free air convection) 100 90 80 70 %] d [ 60 a o ut L 50 p ut 40 O 30 20 10 0 -40-30-20-10 0 10 20 30 40 50 60 70 80 90 100110 95 Ambient Temperature [°C] www.recom-power.com REV.: 6/2018 ECO-4

RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard UL60950-1, 2nd Edition, 2014 Information Technology Equipment, General Requirements for Safety E224736-A56-UL CAN/CSA C22.2 No. 60950-1, 2nd Edition, 2014 Audio/video, information and communication technology equipment. UL62368-1, 2nd Edition, 2014 E224736-A56-UL Safety requirements CAN/CSA C22.2 No. 62368-1, 2nd Edition, 2014 Audio/video, information and communication technology equipment. IEC62368-1:2014, 2nd Edition ATTCB106076 Safety requirements EN62368-1:2014 +A11:2017 Safety Requirements for Electrical Equipment for Measurement, PS080601010 EN61010-1:2010 Control and Laboratory Use - Part 1: General Requirements EAC RU-AT.49.09571 TP TC 004/2011 RoHs 2+ RoHS-2011/65/EU + AM2015/863 EMC Compliance Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment - with external filter EN55032, Class A/B Emission requirements EMC Filtering Suggestions according to EN55032 Class A and Class B Component List Class A C3 C3 C1 L1 C3 L1 L1 10µF 100V MLCC - - +V +V +V +V IN OUT IN OUT Component List Class B COM C1 C2 C1 C2 C1 C1 L1 C3 -V -V 10µF- 1V00V 10µF 100V 470µH choke 2n2F 8kV-V IN OUT IN OUT MLCC MLCC WE 744 045 120 Vishay HGZ222MBP DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value case non-conductive black plastic, (UL94 V-0) Material potting silicon rubber compound, (UL94 V-0) PCB FR4, (UL94 V-0) Package Dimension (LxWxH) 19.5 x 9.8 x 12.5mm Package Weight 4.3g typ. continued on next page www.recom-power.com REV.: 6/2018 ECO-5

RxxP2xx DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing (mm) embossed logo 19.5 9.8 Pin Connection Pin # Single Dual /X2 1 +Vin +Vin +Vin 2 -Vin -Vin -Vin 12.5 Marking 5 -Vout -Vout No Pin 1 6 No Pin Com -Vout 5 0. 7 +Vout +Vout +Vout Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm 0.50+0.10/-0.05 0.25±0.05 0 1 4. Recommended Footprint Details Bottom View 1 2 5 6 7 4 1 2 5 6 7 2.4 2.5 Top View 3x2.54= 7.62 2.54 1.9 6x2.54= 15.24 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 22.3 x 12.0mm Packaging Quantity tube 25pcs Storage Temperature Range -55°C to +125°C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 6/2018 ECO-6

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R ECOM: R05P205S R05P209S R12P212S R05P205D R05P205D/P R05P205S/P R05P209D R05P209D/P R05P209S/P R05P212D R05P212D/P R05P212S R05P212S/P R05P215D R05P215D/P R05P215S R05P215S/P R05P23.3D R05P23.3D/P R05P23.3S R05P23.3S/P R12P205D R12P205D/P R12P205S R12P205S/P R12P209D R12P209D/P R12P209S R12P209S/P R12P212D R12P212D/P R12P212S/P R12P215D R12P215D/P R12P215S R12P215S/P R12P23.3D R12P23.3D/P R12P23.3S R12P23.3S/P R15P205D R15P205D/P R15P205S R15P205S/P R15P209D R15P209D/P R15P209S R15P209S/P R15P212D R15P212D/P R15P212S R15P212S/P R15P215D R15P215D/P R15P215S R15P215S/P R15P23.3D R15P23.3D/P R15P23.3S R15P23.3S/P R24P205D R24P205D/P R24P205S R24P205S/P R24P209D R24P209D/P R24P209S R24P209S/P R24P212D R24P212D/P R24P212S R24P212S/P R24P215D R24P215D/P R24P215S R24P215S/P R24P23.3D R24P23.3D/P R24P23.3S R24P23.3S/P R05P205S/P/X2 R05P205S/X2 R05P209S/P/X2 R05P209S/X2 R05P212S/P/X2 R05P212S/X2 R05P215S/P/X2 R05P215S/X2 R05P23.3S/P/X2 R05P23.3S/X2 R12P205S/P/X2 R12P205S/X2 R12P209S/P/X2 R12P209S/X2 R12P212S/P/X2 R12P212S/X2 R12P215S/P/X2 R12P215S/X2 R12P23.3S/P/X2 R12P23.3S/X2