Additional Resources: Product Page | 3D Model ddaattee 06/21/2019 ppaaggee 11 ooff 77 SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER FEATURES • up to 30 W isolated output • industry standard pinout • 4:1 input range (9~36 Vdc, 18~75 Vdc) • smaller package • single/dual/triple regulated outputs • 1,500 Vdc isolation • continuous short circuit, over current protection, over voltage protection • temperature range (-40~85°C) • six-sided metal shielding • efficiency up to 90% MODEL input output output output ripple efficiency voltage voltage current power and noise1 typ range min max max max typ (Vdc) (Vdc) (Vdc) (mA) (mA) (W) (mVp-p) (%) PYB30-Q24-S5-U 24 9~36 5 300 6000 30 100 88 PYB30-Q24-S12-U 24 9~36 12 125 2500 30 100 88 PYB30-Q24-S15-U 24 9~36 15 100 2000 30 100 90 PYB30-Q24-D5-U 24 9~36 ±5 ±150 ±3000 30 100 86 PYB30-Q24-D12-U 24 9~36 ±12 ±63 ±1250 30 100 89 PYB30-Q24-D15-U 24 9~36 ±15 ±50 ±1000 30 100 90 3.3 175 3500 PYB30-Q24-T312-U 24 9~36 26.5 100 85 ±12 ±31 ±625 3.3 175 3500 PYB30-Q24-T315-U 24 9~36 26.5 100 86 ±15 ±25 ±500 5 150 3000 PYB30-Q24-T512-U 24 9~36 30 100 88 ±12 ±31 ±625 5 150 3000 PYB30-Q24-T515-U 24 9~36 30 100 88 ±15 ±25 ±500 PYB30-Q48-S5-U 48 18~75 5 300 6000 30 100 88 PYB30-Q48-S12-U 48 18~75 12 125 2500 30 100 88 PYB30-Q48-S15-U 48 18~75 15 100 2000 30 100 89 PYB30-Q48-D5-U 48 18~75 ±5 ±150 ±3000 30 100 86 PYB30-Q48-D12-U 48 18~75 ±12 ±63 ±1250 30 100 87 PYB30-Q48-D15-U 48 18~75 ±15 ±50 ±1000 30 100 87 3.3 175 3500 PYB30-Q48-T312-U 48 18~75 26.5 100 85 ±12 ±31 ±625 3.3 175 3500 PYB30-Q48-T315-U 48 18~75 26.5 100 85 ±15 ±25 ±500 5 150 3000 PYB30-Q48-T512-U 48 18~75 30 100 88 ±12 ±31 ±625 5 150 3000 PYB30-Q48-T515-U 48 18~75 30 100 87 ±15 ±25 ±500 Notes: 1. Ripple and noise are measured at 20 MHz BW by “parallel cable” method with 1 µF ceramic and 10 µF electrolytic capacitors on the output. cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 2 of 7 PART NUMBER KEY PYB30 - QXX - XXX - X - U Base Number Mounting Type Input Voltage Output Heatsink* U = U-Frame S = single Output Voltage "blank" = no heatsink D = dual H = with heatsink Notes: *Discontinued heatsink versions. T = triple INPUT parameter conditions/description min typ max units 24 Vdc input models 9 24 36 Vdc operating input voltage 48 V input models 18 48 75 Vdc 24 Vdc input models 9 Vdc start-up voltage 48 Vdc input models (single/dual output models) 18 Vdc 48 Vdc input models (triple output models) 17.8 Vdc 24 Vdc input models 7.8 Vdc under voltage shutdown1 48 Vdc input models 16 Vdc for maximum of 1 second surge voltage 24 Vdc input models -0.7 50 Vdc 48 Vdc input models -0.7 100 Vdc start-up time 10 ms filter pi filter models ON (CTRL open or connect high level, 2.5~12 Vdc) CTRL2 models OFF (CTRL connect GND or low level, 0~1.2 Vdc) input current (models OFF) 1 mA Notes: 1. Contact CUI if you are planning to use this feature in your application. 2. CTRL pin voltage is referenced to GND. OUTPUT parameter conditions/description min typ max units full load, input voltage from low to high single and dual output models ±0.2 ±0.5 % line regulation triple output models (main output) ±1 % triple output models (auxiliary outputs) ±5 % 5% to 100% load, nominal input single and dual output models ±0.5 ±1 % load regulation3 triple output models (main output) ±2 % triple output models (auxiliary outputs) ±5 % dual output models: cross regulation main output 50% load, secondary output from ±5 % 10% to 100% load single and dual output models ±1 ±3 % voltage accuracy triple output models (main output) ±1 ±3 % triple output models (auxiliary outputs) ±3 ±5 % adjustability4 ±10 % switching frequency PWM mode 400 kHz transient recovery time 25% load step change 300 500 μs transient response deviation 25% load step change ±3 ±5 % 100% load, single and dual output models ±0.02 %/°C temperature coefficient 100% load, triple output models ±0.03 %/°C Notes: 3. For dual output models, unbalanced load can not exceed ±5%. If ±5% is exceeded, it may not meet all specifications. 4. Output trimming available on single and dual output models only. cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 3 of 7 PROTECTIONS parameter conditions/description min typ max units short circuit protection hiccup, continuous, automatic recovery over current protection 150 % 3.3 Vdc output models 3.9 Vdc 5 Vdc output models 6.2 Vdc over voltage protection 12 Vdc output models 15 Vdc 15 Vdc output models 18 Vdc SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage for 1 minute at 1 mA max. 1,500 Vdc isolation resistance at 500 Vdc 1,000 MΩ conducted emissions CISPR22/EN55022, class A, class B (external circuit required, see Figure 1-b) radiated emissions CISPR22/EN55022, class A, class B (external circuit required, see Figure 1-b) ESD IEC/EN61000-4-2, class B, contact ± 4kV radiated immunity IEC/EN61000-4-3, class A, 10V/m EFT/burst IEC/EN61000-4-4, class B, ± 2kV (external circuit required, see Figure 1-a) surge IEC/EN61000-4-5, class B, ± 2kV (external circuit required, see Figure 1-a) conducted immunity IEC/EN61000-4-6, class A, 3 Vr.m.s voltage dips & interruptions IEC/EN61000-4-29, class B, 0%-70% MTBF as per MIL-HDBK-217F @ 25°C 1,000,000 hours RoHS 2011/65/EU ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curve -40 85 °C storage temperature -55 125 °C storage humidity non-condensing 5 95 % case temperature at full load, Ta=71°C 105 °C MECHANICAL parameter conditions/description min typ max units U-Frame: 67.5 x 54.99 x 19.05 mm dimensions U-Frame with heatsink: 67.5 x 54.99 x 22.90 mm case material aluminum alloy U-Frame 58 g weight U-Frame with heatsink 78 g cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 4 of 7 MECHANICAL DRAWING U-FRAME 54.992.165 units: mm[inch] 4.75 0.187 3.51 0.138 20.320.800 (2 PLCS) (2 PLCS) 0.010 (2 PLCS) tolerance: ±0.5[±0.020] Wire range: 22~14 AWG DIN rail mounting kit available (part# STK-DIN) 34.011.339 0.010 50.111.973 PIN CONNECTIONS 67.51 2.658 Single Dual Triple PIN Output Output Output 1 Vin Vin Vin 22.230.875 2 GND GND GND 1 2 3 4 5 6 7 8 0.010 12.190.480 3 CTRL CTRL CTRL 54.99 2.165 4 Case Case Case 33.021.300 M3x4 Top View 5.210.205 0.010 (2 PLCS) (5 PLCS) 5 NC Trim -Vo2 (2 PLCS) 10.990.433 6 Trim -Vo 0V 1.00 0.039 52.99 2.086 0.010 (2 PLCS) 7 0V 0V +Vo1 Bottom View 8 +Vo +Vo +Vo2 4.01 0.158 19.05 0.750 0.010 (TYP) Front View U-FRAME WITH HEATSINK 4.750.187 54.992.165 (2 PLCS) 3.510.138 20.320.800 units: mm[inch] (2 PLCS) 0.010 (2 PLCS) tolerance: ±0.5[±0.020] Wire range: 22~14 AWG DIN rail mounting kit available (part# STK-DIN) 34.011.339 0.010 50.111.973 67.512.658 PIN CONNECTIONS Single Dual Triple PIN Output Output Output 22.230.875 0.010 1 Vin Vin Vin 1 2 3 4 5 6 7 8 12.190.480 2 GND GND GND Top View 3 CTRL CTRL CTRL 5.210.205 330..002101 (.23 0P0LCS) M(53 PxL4CS) 4 Case Case Case 1.000.039 52.992.086 (2 PLCS) (TYP) 10.990.433 5 NC Trim -Vo2 0.010 (2 PLCS) Bottom View 6 Trim -Vo 0V 22.900.902 7 0V 0V +Vo1 8 +Vo +Vo +Vo2 4.010.158 Front View 0.010 (TYP) cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 5 of 7 DERATING CURVES Temperature Derating Curve With heatsink 100 80 %) Without heatsink ( d 60 a o Safe operating area L 40 20 -40 -20 0 20 40 60 70 85 Ambient Temperature (°C) EMC RECOMMENDED CIRCUIT Figure 1 Table 1 Single Output Recommended external circuit components FUSE LDM LCM C3 Vin Vin +Vo Vin (Vdc) 24 48 FUSE Choose according to input current C1 C2 EUT LOAD MOV 10D560K 10D101K MOV TVS C0 GND GND 0V LDM 56μH 56μH (cid:11)(cid:68)(cid:12) (cid:11)(cid:69)(cid:12) C4 TVS SMCJ48A SMCJ90A Dual Output C0 120μF/50V 120μF/100V C1 4.7μF/50V 2.2μF/100V FUSE LDM LCM C3 +Vo Vin Vin LCM 2.2mH 2.2mH LOAD C2 4.7μF/50V 2.2μF/100V C1 C2 EUT 0V C3* 1nF/2kV 1nF/2kV MOV TVS C0 GND GND LOAD C4* 1nF/2kV 1nF/2kV (cid:11)(cid:68)(cid:12) (cid:11)(cid:69)(cid:12) -Vo C4 Note: *2nF/2kV capacitors for triple output, 48 Vdc input models. Triple Output FUSE LDM LCM C3 +Vo1 Vin Vin +Vo2 LOAD LOAD EUT C1 C2 MOV TVS C0 0V GND GND LOAD (cid:11)(cid:68)(cid:12) (cid:11)(cid:69)(cid:12) C4 -Vo2 TEST CONFIGURATION Table 2 Oscilloscope Lin External components Lin 4.7μH Figure 2 Current Cin Probe DC DC Load Cin 220μF, ESR < 1.0Ω at 100 kHz Note: Input reflected-ripple current is measured with an inductor Lin and Capacitor Cin to simulate source impedance. cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 6 of 7 APPLICATION NOTES 1. Recommended circuit This series has been tested according to the following recommended testing circuit before leaving the factory. This series should be tested under load (see Figure 3). If you want to further decrease the input/output ripple, you can increase the capacitance accord- ingly or choose capacitors with low ESR (see Table 3). However, the capacitance of the output filter capacitor must be appropriate. If the capacitance is too high, a startup problem might arise. For every channel of the output, to ensure safe and reliable operation, the maximum capacitance must be less than the maximum capacitive load (see Table 4). Figure 3 Single Output Dual Output Vin +Vo Vin +Vo Cout Cin DC DC Cout Cin DC DC 0V Cout GND 0V GND -Vo Triple Output Vin Vo1 Vo2 Cout Cout C in DC DC Cout 0V GND -Vo2 Table 3 Table 4 Sing le Dual Triple Max. Max. Triple Max. Cin Cout Cin Cout1 Cin Cout1 Single Dual Vout Vout Vout Capacitive Capacitive Vout Capacitive (µF) (µF) (µF) (µF) (µF) (µF) Vout Vout (Vdc) (Vdc) (Vdc) Load Load1 (Vdc) Load1 (Vdc) (Vdc) (μF) (μF) (μF) -- -- -- -- -- -- 3.3 10 10 -- -- -- -- 3.3/±12 4700/300 5 10 10 ±5 10 10 5 10 10 5 6000 5 2000 3.3/±15 4700/220 12 10 4.7 ±12 10 4.7 ±12 10 4.7 12 2500 12 1250 5/±12 4700/300 15 10 4.7 ±15 10 4.7 ±15 10 4.7 15 1100 15 680 5/±15 4700/220 Note: 1. For each output. Note: 1. For each output. 2. Output voltage trimming Leave open if not used. Figure 4 Application Circuit for Trim pin Formula for Trim Resistor (part in broken line is the interior of models) +Vo +Vo up: RT= aRR2- 2a -R3 a=VoV’ r- eVfref R1 VRre1f R3 Trim VRre1f R3 RT Trim dNoowtne:: R T=ValuaReR1- 1afor -RR13, R2, Ra3=, VanoV’d r- eVVfrreeff rRe2fer to Table 5 R2 RT RT: Trim Resistor R2 a: User-defined parameter, no actual meanings Vo': The trim up/down voltage 0V 0V Trimup Trimdown Vout R1 R2 R3 Vref (Vdc) (kΩ) (kΩ) (kΩ) (V) 5 2.883 2.864 10 2.5 Table 5 12 10.971 2.864 17.8 2.5 15 14.497 2.864 17.8 2.5 Note: 1. Minimum load shouldn't be less than 5%, otherwise ripple may increase dramatically. Operation under minimum load will not damage the converter, however, they may not meet all specifications listed. 2. Maximum capacitive load is tested at input voltage range and full load. 3. All specifications are measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. cui.com

Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PYB30-U │ DESCRIPTION: DC-DC CONVERTER date 06/21/2019 │ page 7 of 7 REVISION HISTORY rev. description date 1.0 initial release 06/26/2013 1.01 updated spec 08/16/2013 1.02 updated spec 08/18/2014 1.03 discontinued heat sink versions 06/21/2019 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Fax 503.612.2383 Tualatin, OR 97062 cui.com 800.275.4899 techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C UI Inc.: PYB30-Q24-D12-U PYB30-Q24-D15-U PYB30-Q24-D5-U PYB30-Q24-S12-U PYB30-Q24-S15-U PYB30-Q24-S5- U PYB30-Q24-T312-U PYB30-Q24-T315-U PYB30-Q24-T512-U PYB30-Q24-T515-U PYB30-Q48-D12-U PYB30- Q48-D15-U PYB30-Q48-D5-U PYB30-Q48-S12-U PYB30-Q48-S15-U PYB30-Q48-S5-U PYB30-Q48-T312-U PYB30-Q48-T315-U PYB30-Q48-T512-U PYB30-Q48-T515-U