PVG3.pdf 03/14/19 Trimmer Potentiometers SMD Sealed Type Single-Turn PVG3 Series 3.6 Features (.142) 2.0 ADJ. SLOT 2 (.079) 2.2 DIA. (.087) 1.Surface Mount 3 mm Square / Single-turn / Cermet / Sealed .45 3.4 X(.018)WIDE (.134) 2.Available in J-hook, gull-wing and reverse gull-wing pin styles X ( ..04106) DEEP M0I.1N. 3.Units can be pre-adjusted at clockwise, counter-clockwise 3 1 or standard 50 % position (.20.931) (.00.264) (.004) 1.00 ± 0.15 4.3 mm design meets EIA/EIAJ/IPC/VECI SMD standard (.039 ± .006) trimmer footprint 3.6 5.RoHS compliant* PVG3A (.142) 6.Metal cover for thermal protection/heat transfer 7.Units tested under 85 °C water test for 60 seconds, no bubbles 2.7 0.75 ± 0.15 (.106) (.030 ± .006) 3.6 2.8 3.6 2.0 1.1 (.142) (.131.40) 5.8 (.20.958) ADJ. SLOT 2(.142) (.079) (.043) (.134) (.228) 2.0 2.2 DIA. (.087) A 2D.J2. SLDOITA. 2 2 PL(C.0S7.9) X ( ..04158)WIDE (.31.344) XX( ( ( ...00000..8225570205))) WDEIDEEP (M.00I.0N14.) X ( ..04106) DE2E.3P3 1 (M.00I.01N4.) 3 1 (.091) 1.00 ± 0.15 0.8 ± 0.2 0.5 (.039 ± .006) (.031 ± .0082).3 (.21.180) (.00.250)2 PLCS. (.020) 4.5 PVG3K (.091) PVG3G (.177) 2.7 0.75 ± 0.15 Circuit (.106) (.030 ± .006) #2 (Wiper) #1 #3 DIMENSIONS: MM TOLERANCES: ±(.00.1205) (INCHES) EXCEPT WHERE NOTED Clockwise Top Adjustment (Standard J-Hook Style) Power Rating Number of Turns Mechanical Rotation TCR Part Number Total Resistance Value (W) (Effective Rotation Angle) Angle (ppm/°C) PVG3A100C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10 ohm ± 20% ±150 PVG3A200C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20 ohm ± 20% ±150 PVG3A500C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50 ohm ± 20% ±150 PVG3A101C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100 ohm ± 20% ±150 PVG3A201C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200 ohm ± 20% ±150 PVG3A501C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500 ohm ± 20% ±150 PVG3A102C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1k ohm ± 20% ±150 PVG3A202C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2k ohm ± 20% ±150 PVG3A502C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 5k ohm ± 20% ±150 PVG3A103C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10k ohm ± 20% ±150 PVG3A203C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20k ohm ± 20% ±150 PVG3A503C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50k ohm ± 20% ±150 PVG3A104C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100k ohm ± 20% ±150 PVG3A204C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200k ohm ± 20% ±150 PVG3A504C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500k ohm ± 20% ±150 PVG3A105C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1M ohm ± 20% ±150 PVG3A205C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2M ohm ± 20% ±150 Operating Temperature Range: -55 to +125 °C Soldering Method: Reflow / Soldering Iron *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. WARNING Cancer and Reproductive Harm The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of www.P65Warnings.ca.gov this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

PVG3.pdf 03/14/19 Top Adjustment (Gull-Wing Style) Power Rating Number of Turns Mechanical Rotation TCR Part Number Total Resistance Value (W) (Effective Rotation Angle) Angle (ppm/°C) PVG3G100C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10 ohm ± 20% ±150 PVG3G200C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20 ohm ± 20% ±150 PVG3G500C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50 ohm ± 20% ±150 PVG3G101C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100 ohm ± 20% ±150 PVG3G201C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200 ohm ± 20% ±150 PVG3G501C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500 ohm ± 20% ±150 PVG3G102C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1k ohm ± 20% ±150 PVG3G202C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2k ohm ± 20% ±150 PVG3G502C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 5k ohm ± 20% ±150 PVG3G103C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10k ohm ± 20% ±150 PVG3G203C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20k ohm ± 20% ±150 PVG3G503C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50k ohm ± 20% ±150 PVG3G104C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100k ohm ± 20% ±150 PVG3G204C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200k ohm ± 20% ±150 PVG3G504C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500k ohm ± 20% ±150 PVG3G105C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1M ohm ± 20% ±150 PVG3G205C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2M ohm ± 20% ±150 Operating Temperature Range: -55 to +125 °C Soldering Method: Reflow / Soldering Iron Rear Adjustment (Reverse Gull-Wing Style) Power Rating Number of Turns Mechanical Rotation TCR Part Number Total Resistance Value (W) (Effective Rotation Angle) Angle (ppm/°C) PVG3K100C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10 ohm ± 20% ±150 PVG3K200C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20 ohm ± 20% ±150 PVG3K500C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50 ohm ± 20% ±150 PVG3K101C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100 ohm ± 20% ±150 PVG3K201C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200 ohm ± 20% ±150 PVG3K501C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500 ohm ± 20% ±150 PVG3K102C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1k ohm ± 20% ±150 PVG3K202C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2k ohm ± 20% ±150 PVG3K502C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 5k ohm ± 20% ±150 PVG3K103C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 10k ohm ± 20% ±150 PVG3K203C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 20k ohm ± 20% ±150 PVG3K503C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 50k ohm ± 20% ±150 PVG3K104C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 100k ohm ± 20% ±150 PVG3K204C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 200k ohm ± 20% ±150 PVG3K504C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 500k ohm ± 20% ±150 PVG3K105C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 1M ohm ± 20% ±150 PVG3K205C01 0.25 (70 °C) 1 (210 ° ±10 °) 250 ± 10 ° 2M ohm ± 20% ±150 Operating Temperature Range: -55 to +125 °C Soldering Method: Reflow / Soldering Iron Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

PVG3.pdf 03/14/19 Standard Land Patterns PVG3A PVG3G PVG3K (.10.545) (.00.395) (.10.545) (.10.531) (.10.559) (.10.309) 2.1 2.5 3.1 (.083) (.098) (.122) 0.9 1.3 (.035) 2.1 (.051) (.083) 2.5 (.098) 1.0 (.039) 3.1 (.122) 1.1 1.1 (.043) (.043) 1.1 1.1 1.2 (.043) (.043) 1.2 (.047) 1.2 1.2 (.047) (.047) (.047) 1.1 TOLERANCES: ± 0.1 (.043) DIMENSIONS: MM (.004) (INCHES) EXCEPT WHERE NOTED Characteristics Part Numbering Temperature ΔTR : ±2% PV G3 A 103 C01 R00 Cycle ΔV.S.S.: ±1% Product ID PV = Trimming Potentiometer ΔTR : ±2% Series Humidity IR : 10M ohm min. G3 = SMD Sealed 3 mm Square, Single-Turn Pin Style ΔTR : ±1% A = J-Hook Vibration (20G) ΔV.S.S.: ±1% G = Gull-Wing K = Reverse Gull-Wing ΔTR : ±1% Shock (100G) Total Resistance ΔV.S.S.: ±1% Expressed by three figures. The first and second figures are Temperature ΔTR : ±3% or 3 ohm max., whichever is greater significant digits; the third figure expresses Load Life ΔV.S.S.: ±1% the number of zeros that follow. Low Temperature ΔTR : ±2% Resistance Resistance Exposure ΔV.S.S.: ±2% (Ohms) Code 10 100 High Temperature ΔTR : ±3% 20 200 Exposure ΔV.S.S.: ±2% 50 500 100 101 Rotational Life ΔTR : R≤100 kohm 200 201 ±3% or 2 ohm max., whichever is greater 500 501 1,000 102 R>100 kohm 2,000 202 +0/-10% (50 cycles) 5,000 502 10,000 103 ΔTR : Total Resistance Change 20,000 203 ΔV.S.S.: Voltage Setting Stability 50,000 503 IR : Insulation Resistance 100,000 104 200,000 204 500,000 504 1,000,000 105 2,000,000 205 Popular distribution values listed in boldface. Special resistances available. Individual Specification C01 = Standard Type Packaging R00 = Tape and Reel (1,000 pcs./7 ” reel) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R