PVDZ172NPbF Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-60V AC, 1.5A General Description Features The PVDZ172N Photovoltaic Relay is a single-pole, normally open solid state relay that can replace (cid:131) 250mΩ On-Resistance electromechanical relays used for general purpose (cid:131) Bounce-Free Operation switching of DC loads. It utilizes International (cid:131) 1.5 Amp capacity Rectifier’s HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic (cid:131) 4,000 V I/O Isolation RMS generator of novel construction. The output switch is (cid:131) Solid-State Reliability controlled by radiation from a GaAlAs light emitting (cid:131) UL recognized diode (LED) which is optically isolated from the (cid:131) ESD Tolerance: photovoltaic generator. 4000V Human Body Model These units overcome the limitations of both 500V Machine Model electromechanical and reed relays by offering the solid-state advantages of high sensitivity, miniaturization, no contact bounce, long operational life, insensitivity to external magnetic fields, shock and vibration, and high reliability inherent with solid state technology. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise. These relays are packaged in 8-pin, molded DIP packages and available with thru-hole and surface- mount (gull-wing) leads, in plastic shipping tubes. Applications (cid:131) Portable Electronics Part Identification (cid:131) Programmable Logic Controllers (cid:131) Computers and Peripheral Devices PVDZ172NPbF thru-hole (cid:131) Audio Equipment PVDZ172NSPbF surface-mount (cid:131) Power Supplies and Power Distribution (gull-wing) (cid:131) Instrumentation PVDZ172NS-TPbF surface-mount, tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

PVDZ172NPbF Electrical Specifications (-40°C ≤ TA ≤ =+85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figures 1 and 2) 10 mA Maximum Control Current for Off-State Resistance @ TA=+25°C 0.4 mA Control Current Range (Caution: Current limit input LED, see figure 6) 5.0 to 25 mA Maximum Reverse Voltage 6.0 V OUTPUT CHARACTERISTICS Units Operating Voltage Range 0 to 60 V(DC) Maximum Load Current 40°C (see figures 1 and 2) 1.5 A(DC) Maximum Pulsed Load Current @TA=+25°C (100 ms @ 10% duty cycle) 4.0 A(DC) Maximum Turn-On Time @TA=+25°C (see figure 7) 2.0 ms For 500mA, 50V Load, 10mA Control DC Maximum Turn-Off Time @T =+25°C (see figure 7) 0.5 ms A For 500mA, 50V Load, 10mA Control DC Maximum On State Resistance @TA=+25°C(pulsed) (see figure 4) 250 mΩ 1.0A load, 10mA Control Minimum Off State Resistance @T =+25°C @ 48 V (see figure 5) 108 Ohms A DC Minimum Off-State dv/dt 1000 V/µs Output Capacitance (see figure 9) 150 pF @ 50 VDC GENERAL CHARACTERISTICS Limits Units Dielectric Strength, Input-Output 4000 V (RMS) Insulation Resistance, Input-Output , 90 VDC 1012 @TA=+25°C - 50% RH Ω Capacitance, Input-Output 1.0 pF Lead Temperature (1.6mm below seating plane) for 10 seconds +260 °C Ambient Temperature Range: Operating -40 to +85 °C Storage -40 to +100 °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

PVDZ172NPbF Wiring Diagrams Source 8 Anode Electromechanical Schematic DC Cathode Analogy 5 Drain 1.8 2.00 ILED = 10mA 1.75 1.5 1.50 nt (A) 1.2 ILED = 5mA (Typical) nt (A)1.25 e e urr 0.9 urr1.00 C C d d a a0.75 Lo 0.6 Lo ax. ax. 0.50 M 0.3 M +25 deg. C +80 deg. C 0.25 +40 deg. C +60 deg. C 0 0 0 20 40 60 80 100 1 2 3 4 5 Ambient Temperature (deg. C) LED Control Current (mA) Figure 1. Current Derating Curves Figure 2. Typical Control Current Requirements 1.6 +40 deg. C 400 1.4 350 +25 deg. C +80 deg. C 1.2 300 +60 deg. C A) 1.0 m) 250 ent ( 0.8 mOh 200 urr n ( C 0.6 o 150 ad ILED = 10mA Rd- Lo 0.4 100 0.2 50 0 0 0 0.1 0.2 0.3 0.4 0.5 -40 -20 0 20 40 60 80 100 Vds (V) Ambient Temperature (deg. C) Figure 3. Typical On-Characteristics Figure 4. Typical On-Resistance 3 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

PVDZ172NPbF 20 100 CAUTION: provide current limiting so that 25 mA maximum steady- state control current rating is not exceeded 30 16 Id-off/Id-off 25 deg. C 311..000 Input Current (mA) 128 Min. device and +85 deg. C limit TYPICAL Max. device and -40 deg. C limit 4 0.3 0 0 0.5 1.0 1.5 2.0 0.1 -35 -15 5 25 45 65 85 105 LED Forward Voltage Drop (Volts DC) Ambient Temperature (deg. C) Figure 6. Input Characteristics Figure 5. Typical Normalized Off-State Leakage (Current Controlled) 20 mA) 10 nt ( ILED e Curr 90% D E toff tdly ton L 5 ID 10% 320 50 100 200 500 1000 2000 tdlyton toff Delay Time (microseconds) Figure 7. Typical Delay Times Figure 8. Delay Time Definitions 1000 750 F) p e ( c an 500 cit a p a C al 250 c pi y T 0 0 10 20 30 40 50 Vds, Drain to Source Voltage (V) Figure 9. Typical Output Capacitance 4 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

PVDZ172NPbF Case Outlines 01-2013 00 (MS-001AB) 01-2019 00 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 5 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

PVDZ172NPbF Qualification information† Industrial Qualification level (per JEDEC JESD47I †† guidelines) PVDZ172NPbF N/A Moisture Sensitivity PVDZ172NSPbF MSL4 Level PVDZ172NS-TPbF (per JEDEC J-STD-020E & JEDEC J-STD-033C ††) RoHS compliant Yes † Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release Revision History Date Comments • Added Qualification Information Table on page 6 4/29/2015 • Updated data sheet with new IR corporate template IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback April 29, 2015

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I nfineon: PVDZ172NPBF PVDZ172NS-TPBF PVDZ172NSPBF