PROPRIETARY INFORMATION NOTICE This document and the designs, specifications, and engineering information disclosed herein are the property of Parlex USA LLC, 0.100"±0.005" and are not to be disseminated or reproduced without expressed TYP., NON-CUMULATIVE written consent. This document is loaned in confidence and then 25 FT. MINIMUM UNSPLICED 0.075"±0.010" only for consideration of the matter disclosed hereon. In accepting loan of this document, the recipient agrees to keep it and the matter disclosed hereon in confidence and not to use or permit their use in COND.#1 any way detrimental to Parlex USA LLC. TINNED CABLE WIDTH Non RoHS Part Numbering System RoHS Part Numbering System PS-1635-XX B PSR1635-XX B CHARACTER INDICATING REVISION CHARACTER INDICATING REVISION LEVEL OF SPECIFICATION DRAWING. LEVEL OF SPECIFICATION DRAWING. SPACE SPACE TWO DIGIT NUMBER INDICATING TOTAL TWO DIGIT NUMBER INDICATING TOTAL NUMBER OF CONDUCTORS. NUMBER OF CONDUCTORS. DASH DASH INDICATES DRAWING SPECIFICATION "R" INDICATES CABLE IS RoHS COMPLIANT FOR 2.54MM PITCH BULK CABLE WITH PIN #1 DESIGNATED AS TINNED. INDICATES DRAWING SPECIFICATION FOR 2.54MM PITCH BULK CABLE i.e. PS-1635-20 B WITH PIN #1 DESIGNATED AS TINNED. ( INDICATES 20 POS. CABLE, 2.54MM PITCH, COND. #1 TINNED ) i.e. PSR1635-20 B ( INDICATES 20 POS. CABLE, 2.54MM PITCH, 1) BULK CABLE SPECIFICATION FOR 2.54MM PITCH COND. #1 TINNED, RoHS COMPLIANT ) FLAT LAMINATED CABLE. 2) NUMBER OF CONDUCTORS AVAILABLE 1 THROUGH 99 3) CONDUCTOR NUMBER 1 IS DISTINGUISHED FROM REMAINING CONDUCTORS BY TIN PLATING. IT IS VISIBLE, AS SUCH, THROUGH POLYESTER INSULATION. 4) INSULATION: 0.002" THICK POLYESTER WITH FLAME RETARDANT ADHESIVE. A Johnson Electric Company 5) CONDUCTORS: 0.003" X 0.050" FLAT COPPER, POS. #1 IS TIN PLATED (27 AWG EQUIVALENT) SPECIFICATION DRAWING FOR BULK 6) U.L. RATING: AWM STYLE 2643, 105°C, VW-1, 300V CABLE, 2.54MM PITCH, COND. #1 TINNED, 7) CURRENT RATING: 3A MAXIMUM MATCHING STANDARD AMP REQUIREMENTS 8) DIELECTRIC STRENGTH: 2500V/MIL FOR .100" CENTERLINE FFC 9) WHEN ORDERING, USE PART NUMBERING SYSTEM DESCRIBED SIZE FSCM Rev. TO DETERMINE NUMBER OF CONDUCTORS REQUIRED B 18377 PS-1635 B 10) CABLE WIDTH= (NUMBER OF CONDUCTORS +1 ) X 0.100" SCALE NA SHEET 1 OF 1