Solid State Relay OCMOS FET PS7241E-1A 4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE D 1-ch Optical Coupled MOS FET −NEPOC Series− E DESCRIPTION The PS7241E-1A is an optically coupled element that combines a GaAs infrared LED on the input side with a normally-open MOS FET on the output side to realize an excellent cost performance. U The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals. FEATURES N PIN CONNECTION • Small and thin package (4-pin SOP, Height = 2.1 mm) (Top View) • 1 channel type (1 a output) 4 3 • Designed for AC/DC switching line changer I • Low offset voltage 1.LED Anode (cid:144) • Ordering number of taping product: PS7241E-1A-E3, E4: 900 Tpcs/reel 2.LED Cathode : PS7241E-1A-F3, F4: 3 500 pcs/reel 3.MOS FET 4.MOS FET • Pb-Free product • Safety standards N 1 2 • UL approved: No. E72422 • BSI approved: No. 8241/8242 APPLICATIONS O • Laptop PC, PDA • Modem card • Telephone, FAX • Measurement equipment C S I D Document No. PN10459EJ04V0DS (4th edition) Date Published January 2010 NS The mark (cid:144) shows major revised points. The revised points can be easily searched by copying an "(cid:144)" in the PDF file and specifying it in the "Find what:" field.

PS7241E-1A PACKAGE DIMENSIONS (UNIT: mm) 4.0±0.5 4 3 D E U 7.0±0.3 1 2 4.4 N +0.0805–0.05 +0.100.15–0.05 2. I +0.080.05–0.05 0.40+–00..10205.540.25 M T 0.5±0.3 (cid:144) PHOTOCOUPLER CONSTRUCTION N Parameter Unit(MIN.) Air Distance 5 mm O Outer Creepage Distance 5 mm Isolation Distance 0.4 mm C (cid:144) MARKING EXAMPLE S 41EA I N 031 Assembly Lot D *1 No. 1 pin Mark N 0 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 Bar : Pb-Free 2 Data Sheet PN10459EJ04V0DS

PS7241E-1A ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Specification Approval Number*1 D PS7241E-1A PS7241E-1A-A Pb-Free Magazine case 100 pcs Standard products PS7241E-1A PS7241E-1A-E3 PS7241E-1A-E3-A Embossed Tape 900 pcs/reel (UL, BSI approved) PS7241E-1A-E4 PS7241E-1A-E4-A E PS7241E-1A-F3 PS7241E-1A-F3-A Embossed Tape 3 500 pcs/reel PS7241E-1A-F4 PS7241E-1A-F4-A U *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) N Parameter Symbol Ratings Unit Diode Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V I Power Dissipation PD 50 mW T Peak Forward Current *1 I FP 1 A MOS FET Break Down Voltage VL 400 V Continuous Load Current IL N120 mA Pulse Load Current*2 ILP 240 mA (AC/DC Connection) Power Dissipation PD 300 mW Isolation Voltage *3 BV O 1500 Vr.m.s. Total Power Dissipation PT 350 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature CTstg −40 to +100 °C *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1S minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. I D Data Sheet PN10459EJ04V0DS 3

PS7241E-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 4 10 20 mA D LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°C) E Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF I F = 10 mA 1.2 1.4 V U Reverse Current IR V R = 5 V 5.0 μA MOS FET Off-state Leakage ILoff V D = 400 V 1.0 μA Current (cid:144) Output Capacitance Cout V D = 0 V, f = 1 MHz N 50 pF Coupled LED On-state Current IFon I L = 120 mA 4.0 mA (cid:144) On-state Resistance Ron1 I F = 10 mA, IL = 10 mA 22 30 Ω Ron2 I F = 10 mA, IL = 120 mA, tI ≤ 10 ms 17 23 Turn-on Time*1, 2 ton I F = 10 mA, VO = 5 V,T RL = 500 Ω, 0.5 1.0 ms Turn-off Time*1, 2 toff PW ≥ 10 ms 0.07 0.2 Isolation Resistance RI-O V I-O = 1.0 kVDC 109 Ω N Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time O IF Pulse Input VL Input 50% 0 C VO = 5 V 90% Input monitor VOmonitor Output S Rin RL 10% ton toff I *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. D Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 4 Data Sheet PN10459EJ04V0DS

PS7241E-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE AMBIENT TEMPERATURE D 100 300 A) m A) ent I (F 80 nt I (mL 200 E Curr 60 urre d C ar d w a or 40 Lo F m 100 U m u u m m 20 xi axi Ma M 0 0 –25 0 25 50 7585 100 –25 N0 25 50 7585 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) FORWARD VOLTAGE vs. OUTPUT CAPACITANCE vs. AMBIENT TEMPERATURE IAPPLIED VOLTAGE 1.8 200 T f = 1 MHz Voltage V (V)F 11..46 IF = 5321000051 mmmmmmAAAAAA N acitance C (pF)out 115000 d 1.2 p ar Ca Forw 1.0 O utput 50 O 0.8 –25 0 25 50 75 100 0 20 40 60 80 100 120 C Ambient Temperature TA (°C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10–6 S 200 IF = 10 mA A) e Current I (Loff 111000–––798DI TA = 85°C ent I (mA)L 100 akag 25°C Curr –4.0 –2.0 0 2.0 4.0 ate Le10–10 Load –100 st10–11 Off- 10–12 –200 0 100 200 300 400 500 Applied Voltage VD (V) Load Voltage VL (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10459EJ04V0DS 5

PS7241E-1A ON-STATE RESISTANCE vs. ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE AMBIENT TEMPERATURE 40 40 IF = 10 mA, IF = 10 mA, 35 IL = 10 mA 35 IL = 120 mA Ω) Ω) D R (on1 30 R (on2 30 e 25 e 25 c c n n a a st 20 st 20 E si si e e R 15 R 15 e e at at st 10 st 10 n- n- O 5 O 5 U 0 0 –50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) N TURN-ON TIME vs. TURN-OFF TIME vs. AMBIENT TEMPERATURE AMBIENT TEMPERATURE 1 000 200 900 VIF L= = 1 50 Vm,A, 1I80 VIF L= = 1 50 Vm,A, RL = 500 Ω RL = 500 Ω 800 160 T μe t( s)on 760000 μe t( s)off 114200 m 500 m 100 Ti N Ti on 400 off 80 urn- 300 urn- 60 T T 200 40 100 O 20 0 0 –50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) C TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 3.0 0.30 VL = 5 V, VL = 5 V, 2.5 S RL = 500 Ω 0.25 RL = 500 Ω s) s) m m e t (on 2.0 TA = +85°C e t(off 0.20 TA = –40°C m 1.5 I m0.15 Ti Ti Turn-on 1.0D +25–°4C0°C Turn-off 0.10 +25+°8C5°C 0.5 0.05 0 5 10 15 20 25 0 5 10 15 20 25 Forward Current IF (mA) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 6 Data Sheet PN10459EJ04V0DS

PS7241E-1A ON-STATE RESISTANCE DISTRIBUTION ON-STATE RESISTANCE DISTRIBUTION 30 30 n = 50 pcs, n = 50 pcs, IF = 10 mA, IF = 10 mA, 25 25 IL = 10 mA IL = 120 mA D s) 20 s) 20 c c p p er ( 15 er ( 15 b b m m E u u N 10 N 10 5 5 U 0 0 21.6 21.8 22 22.2 22.4 22.6 22.8 23 17 17.2 17.4 17.6 17.8 18 On-state Resistance Ron1 (Ω) On-state Resistance Ron2 (Ω) N TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 40 40 n = 50 pcs, n = 50 pcs, 35 IF = 10 mA, 35 IF = 10 mA, VO = 5 V, I VO = 5 V, RL = 500 Ω RL = 500 Ω 30 30 T cs) 25 cs) 25 p p er ( 20 er ( 20 b b m m u 15 N u 15 N N 10 10 5 5 O 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.03 0.04 0.05 0.06 0.07 0.08 Turn-on Time ton (ms) Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. C S I D Data Sheet PN10459EJ04V0DS 7

PS7241E-1A TAPING SPECIFICATIONS (in millimeters) D Outline and Dimensions (Tape) 1 0. 2.0±0.05 ± 5 4.0±0.1 1.5+–00. 1 1.7 2.9 MAX. E 5 2 5.5±0.0 12.0±0. 7.4±0.1 U 1.55±0.1 4.6±0.1 2.4±0.1 8.0±0.1 0.3 N Tape Direction I T PS7241E-1A-E3 PS7241E-1A-E4 N O Outline and Dimensions (Reel) 2.0±0.5 C 2.0±0.5 S φ13.0±0.2 φ+0 180–1.5 +160–0 R 1.0 φ I φ21.0±0.8 13.5±1.0 D 17.5±1.0 11.9 to 15.4 Outer edge of Packing: 900 pcs/reel flange 8 Data Sheet PN10459EJ04V0DS

PS7241E-1A Outline and Dimensions (Tape) D 1 0. 2.0±0.05 ± 5 4.0±0.1 1.5+–00. 1 1.7 2.9 MAX. 5 2 E 5.5±0.0 12.0±0. 7.4±0.1 1.55±0.1 4.6±0.1 2.4±0.1 U 8.0±0.1 0.3 N Tape Direction I PS7241E-1A-F3 PS7241E-1A-F4 T N Outline and DimensionOs (Reel) 2.0±0.5 C 2.0±0.5 φ13.0±0.2 0 S 30±2. ±1.0 ±0.2 3 0 0 R 1.0 φ21.0±0.8 φ φ10 φ13. 13.5±1.0 I 17.5±1.0 D 11.9 to 15.4 Outer edge of Packing: 3 500 pcs/reel flange Data Sheet PN10459EJ04V0DS 9

PS7241E-1A RECOMMENDED SOLDERING CONDITIONS (1)Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less D • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorineE (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow U C) ° (heating)N T ( to 10 s e ur 260°C MAX. erat 220°C p m to 60 s e I T ace 180°C T Surf 120°C ge 120±30 s ka (preheating) c a N P O Time (s) (2)Wave soldering • Temperature 260°C or below (molten solder temperature) C • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux SRosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3)Soldering by soldering iron I • Peak temperature (lead part temperature) 350°C or below • TimDe (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a)Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b)Please be sure that the temperature of the package would not be heated over 100°C. (4)Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10459EJ04V0DS

PS7241E-1A USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. D E U N I T N O C S I D Data Sheet PN10459EJ04V0DS 11

PS7241E-1A This product uses gallium arsenide (GaAs). Caution GaAs Products GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. •Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. D 1.Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2.Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until finEal disposal. •Do not burn, destroy, cut, crush, or chemically dissolve the product. •Do not lick the product or in any way allow it to enter the mouth. U N I T N O C S I D

NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of thDese circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property E rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. U 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized foNr use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the rIange specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctiTons or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by N fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EOU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures requCired by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas S Electronics products, or if you have any other inquiries. NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. I D CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus