DATA SHEET PHOTOCOUPLER PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2565-1 is optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2565-1 is in a plastic DIP (Dual In-line Package) and the PS2565L-1 is lead bending type (Gull-wing) for surface mount. The PS2565L1-1 is lead bending type for long creepage distance. The PS2565L2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES PIN CONNECTION • AC input response (Top View) (cid:129) High Isolation voltage (BV = 5 000 Vr.m.s.) (cid:129) High collector to emitter voltage (VCEO = 80 V) 4 3 1. Anode, (cid:129) High current transfer ratio (CTR = 200% TYP.) Cathode 2. Cathode, (cid:129) High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.) Anode <R> (cid:129) Ordering number of taping product: PS2565L-1-F3 : 2 000 pcs/reel 3. Emitter 4. Collector 1 2 : PS2565L2-1-E3: 1 000 pcs/reel <R> (cid:129) Safety standards (cid:129) UL approved: No. E72422 (cid:129) CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) (cid:129) BSI approved: No. 7112/7420 (cid:129) SEMKO approved: No. 903238 (cid:129) NEMKO approved: No. P09210868 (cid:129) DEMKO approved: No. 314999 (cid:129) FIMKO approved: No. FI 25119 (cid:129) DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS (cid:129) Telephone/FAX. (cid:129) FA/OA equipment (cid:129) Programmable logic controller The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PN10236EJ05V0DS (5th edition) Date Published November 2009 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 <R> PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance PS2565L1-1 PS2565-1 4.6±0.35 4.6±0.35 4 3 4 3 5 ±0. 0.5 5 ± 6. 6.5 1 2 7.62 1 2 10.16 4 0. 3 4.15±4 3.5±0. 3.85 ±0.4 3.5±0.3 1.23.2±0.5±0.15 0.50±00 .t1o0 01.52°5 +–00..015 3.15 ±0.351.25±0.15 2.504.500.±205.1M 0.25+–00..105 0 to 15° 0.25 M 2.54 Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PS2565L-1 PS2565L2-1 4.6±0.35 4.6±0.35 4 3 4 3 5 5 0. 0. ± ± 5 5 6. 6. 5±0.3 1 2 +0.10.25 –0.05 +0.10.1 –0.05 3.5±0.3 1 2 0.25±0.2 0.9±0.25 +0.1 0.25–0.05 3. 1.25±0.15 0.25 1.25±0.15 0.9±0.25 0.25 M 10.16 0.25 M 9.60±0.4 2.54 11.8–+00..52 2.54 0.15 <R> PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 4 mm Isolation Thickness 0.4 mm 2 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 <R> MARKING EXAMPLE No. 1 pin Mark 2565 NJ931 Assembly Lot N J 9 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Made in Japan Made in Taiwan Pb-Free New PKG J K Pb-Free and New PKG R Y Halogen Free *1 *1 Special version 3 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 <R> ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Specification Approval Number *1 PS2565-1 PS2565-1-A Pb-Free Magazine case 100 pcs Standard products PS2565-1 PS2565L-1 PS2565L-1-A (UL, CSA, BSI, PS2565L1-1 PS2565L1-1-A SEMKO, NEMKO, PS2565L2-1 PS2565L2-1-A DEMKO, FIMKO PS2565L-1-F3 PS2565L-1-F3-A Embossed Tape 2 000 pcs/reel approved) PS2565L2-1-E3 PS2565L2-1-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2565L-1-V PS2565L-1-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1-V-A approved products PS2565L2-1-V PS2565L2-1-V-A (option) PS2565L-1-V-F3 PS2565L-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2565-1 PS2565-1Y-A Special version Magazine case 100 pcs Standard products PS2565-1 PS2565L-1 PS2565L-1Y-A (Pb-Free and (UL, CSA, BSI, PS2565L1-1 PS2565L1-1Y-A Halogen Free) SEMKO, NEMKO, PS2565L2-1 PS2565L2-1Y-A DEMKO, FIMKO PS2565L-1-F3 PS2565L-1Y-F3-A Embossed Tape 2 000 pcs/reel approved) PS2565L2-1-E3 PS2565L2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1Y-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2565L-1-V PS2565L-1Y-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1Y-V-A approved products PS2565L2-1-V PS2565L2-1Y-V-A (option) PS2565L-1-V-F3 PS2565L-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) IF 80 mA Power Dissipation Derating ΔPD/°C 1.5 mW/°C Power Dissipation PD 150 mW Peak Forward Current*1 IFP 1 A Transistor Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V Collector Current IC 50 mA Power Dissipation Derating ΔPC/°C 1.5 mW/°C Power Dissipation PC 150 mW Isolation Voltage*2 BV 5000 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +150 °C *1 PW = 100 μs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. 5 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = ±10 mA 1.17 1.4 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 pF Transistor Collector to Emitter Dark ICEO VCE = 80 V, IF = 0 mA 100 nA Current Coupled Current Transfer Ratio CTR IF = ±5 mA, VCE = 5 V 80 200 400 % (IC/IF) CTR Ratio*1 CTR1/ IF = 5 mA, VCE = 5 V 0.3 1.0 3.0 CTR2 Collector Saturation VCE (sat) IF = ±10 mA, IC = 2 mA 0.3 V Voltage Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF Rise Time*2 tr VCC = 10 V, IC = 2 mA, RL = 100 Ω 3 μs Fall Time*2 tf 5 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IF1 IC1 VCE IF2 IC2 *2 Test circuit for switching time IF Pulse Input VCC PW = 100 μ s Input Duty Cycle = 1/10 ton toff VOUT td ts 50 Ω RL = 100 Ω 90% Output 10% tr tf 6 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) DIODE POWER DISSIPATION vs. TRANSISTOR POWER DISSIPATION AMBIENT TEMPERATURE vs. AMBIENT TEMPERATURE 150 150 W) W) m pation P (mD 100 1.5 mW/°C sipation P (C 100 1.5 mW/°C ssi Dis wer Di 50 ower 50 o P ode P sistor Di an Tr 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (°C) Ambient Temperature TA (°C) FORWARD CURRENT vs. FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD VOLTAGE 100 80 50 TA = +100°C 60 mA) ++6205°°CC mA) 40 nt I (F 105 (nt IF 20 d Curre 1 ––25550°°°CCC d Curre –200 war 0.5 war or or –40 F F –60 0.1 –80 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 –1.5 –1.0 –0.5 0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK COLLECTOR CURRENT vs. CURRENT vs. AMBIENT TEMPERATURE COLLECTOR SATURATION VOLTAGE nA) 40 50 mA (O10 000 20 mA CE VCE = 80 V 10 mA Dark Current I 1 100000 4210405 VVVV urrent I (mA)C 150 25 mmAA mitter ctor C 1 IF = 1 mA o E 10 olle 0.5 or t C ct e 1 oll 0.1 C –50 –25 0 25 50 75 100 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (°C) Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. 7 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 COLLECTOR CURRENT vs. NORMALIZED CURRENT TRANSFER COLLECTOR TO EMITTER VOLTAGE RATIO vs. AMBIENT TEMPERATURE 70 1.2 R T C 60 o 1.0 A) ati m 50 R (C er 0.8 ollector Current I 432000 50 m2 0A m1 0A m AIF = 5 mA ed Current Transf 00..46 Normalized to 1.0 C 10 aliz 0.2 at TA = 25°C, m IF = 5 mA, VCE = 5 V or N 0 0 2 4 6 8 10 –50 –25 0 25 50 75 100 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (°C) CURRENT TRANSFER RATIO vs. SWITCHING TIME vs. FORWARD CURRENT LOAD RESISTANCE 450 1 000 VCE = 5 V IF = 5 mA, tf %) 400 VCC = 5 V, R ( 350 CTR = 290% T s) Ratio C 235000 Sample AB μme t ( 100 ts ansfer 200 C hing Ti 10 ent Tr 115000 Switc urr tr C 50 td 0 1 0.05 0.1 0.5 1 5 10 50 100 500 1 k 5 k 10 k 50 k100 k Forward Current IF (mA) Load Resistance RL (Ω) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 50 IC = 2 mA, tf IF = 5 mA, VCC = 10 V, tr 0 VCE = 5 V CTR = 290% μe t ( s) 10 td ain GV –5 m G Ti ts d –10 g ze 100 Ω chin 1 mali –15 Swit Nor RL = 1 kΩ –20 300 Ω 0.1 10 50 100 500 1 k 5 k10 k 0.5 1 2 5 10 20 50 100200 500 Load Resistance RL (Ω) Frequency f (kHz) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 LONG TERM CTR DEGRADATION 1.2 TYP. 1.0 e) e Valu 0.8 ITFA = = 5 2 m5°AC v ati 0.6 el IF = 5 mA R (R 0.4 TA = 60°C T C 0.2 0 102 103 104 105 Time (Hr) Remark The graph indicates nominal characteristics. 9 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 <R> TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimesions (Tape) 1 0. 2.0±0.1 5± 4.0±0.1 1.5+–00.1 1.7 4.5 MAX. 1 3 0. 0. ± ± 1 7.5 6.0 ±0. 1 3 0. 1 1.55±0.1 5.3±0.1 4.0±0.1 8.0±0.1 0.4 Tape Direction PS2565L-1-F3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 0 0 2. 1. ± ± 0 0 3 0 R 1.0 φ21.0±0.8 φ3 φ1 17.5±1.0 21.5±1.0 15.9 to 19.4 Outer edge of Packing: 2 000 pcs/reel flange 10 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Outline and Dimensions (Tape) 1 0. 2.0±0.1 5± 4.0±0.1 1.55±0.1 1.7 4.4±0.2 1 0. ± 5 5 11. 0.3 0.1 ± ± 0 5 24. 2.3 1 0.38 2.05±0.1 6.6±0.2 12.0±0.1 Tape Direction PS2565L2-1-E3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 0 2. 0 330±φ 00±1. R 1.0 1 φ φ21.0±0.8 25.5±1.0 29.5±1.0 23.9 to 27.4 Outer edge of Packing: 1 000 pcs/reel flange 11 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 NOTES ON HANDLING 1.Recommended soldering conditions (1)Infrared reflow soldering (cid:129) Peak reflow temperature 260°C or below (package surface temperature) (cid:129) Time of peak reflow temperature 10 seconds or less (cid:129) Time of temperature higher than 220°C 60 seconds or less (cid:129) Time to preheat temperature from 120 to 180°C 120±30 s (cid:129) Number of reflows Three (cid:129) Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow C) ° (heating) T ( to 10 s e ur 260°C MAX. erat 220°C p m to 60 s e T ce 180°C a Surf 120°C e 120±30 s g ka (preheating) c a P Time (s) (2)Wave soldering (cid:129) Temperature 260°C or below (molten solder temperature) (cid:129) Time 10 seconds or less (cid:129) Preheating conditions 120°C or below (package surface temperature) (cid:129) Number of times One (Allowed to be dipped in solder including plastic mold portion.) (cid:129) Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3)Soldering by soldering iron (cid:129) Peak temperature (lead part temperature) 350°C or below (cid:129) Time (each pins) 3 seconds or less (cid:129) Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a)Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b)Please be sure that the temperature of the package would not be heated over 100°C. 12 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 (4)Cautions (cid:129) Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2.Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3.Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 13 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Spec. Unit Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21 Dielectric strength maximum operating isolation voltage UIORM 890 Vpeak Test voltage (partial discharge test, procedure a for type test and random test) Upr 1 335 Vpeak Upr = 1.5 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr 1 669 Vpeak Upr = 1.875 × UIORM, Pd < 5 pC Highest permissible overvoltage UTR 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Storage temperature range Tstg –55 to +150 °C Operating temperature range TA –55 to +100 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C Ris MIN. 1012 Ω VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. 1011 Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 175 °C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Isolation resistance VIO = 500 V dc at TA = Tsi Ris MIN. 109 Ω 14 Data Sheet PN10236EJ05V0DS

PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 This product uses gallium arsenide (GaAs). Caution GaAs Products GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. (cid:129)Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1.Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2.Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. (cid:129)Do not burn, destroy, cut, crush, or chemically dissolve the product. (cid:129)Do not lick the product or in any way allow it to enter the mouth.

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C EL: PS2565L-1-F3-A PS2565L-1-V-A PS2565-1-A PS2565-1-V-A R enesas Electronics: PS2701A-1-V-A