R90E.pdf Aug. 6,2018 r POSISTOR for Circuit Protection

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 EU RoHS Compliant • All the products in this catalog comply with EU RoHS. • EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." • For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/en-eu/support/ compliance/rohs).

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 EU RoHS Compliant • All the products in this catalog comply with EU RoHS. • EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." • For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/en-eu/support/ compliance/rohs).

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Contents Product specifications are as of August 2018. POSISTORr and "POSISTOR" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Part Numbering p2 Basic Characteristics of POSISTORr p5 Selection Guide p7 Application Matrix p8 Application Notes p9 1 Overcurrent Protection Chip Type p13 Chip Type Specifications and Test Methods p24 2 Overcurrent Protection Narrow Current Band 30V Series p27 3 Overcurrent Protection Narrow Current Band 51/60V Series p30 4 Overcurrent Protection Narrow Current Band 140V Series p35 5 Overcurrent Protection 16V Series p38 6 Overcurrent Protection 24/30/32V Series p41 7 Overcurrent Protection 56/80V Series p46 8 Overcurrent Protection 125/140V Series p51 9 Overcurrent Protection 250/265V Series p54 PTGL Series Narrow Current Band Specifications and Test Methods p61 PTGL Series Specifications and Test Methods p63 10 Inrush Current Suppression (Less than 100μF) p64 11 Inrush Current Suppression for High Capacitance (100μF or more) p65 Inrush Current Suppression Specifications and Test Methods p66 12 Overheat Sensing Chip Tight Tolerance Type p67 13 Overheat Sensing Chip Type p68 Overheat Sensing Chip Type (Related Data) p69 Overheat Sensing Chip Tight Tolerance Type (Reference Data) p70 Overheat Sensing Chip Type (Reference Data) p73 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods p75 Overheat Sensing Chip Type Specifications and Test Methods p78 14 Overheat Sensing Lead Type p79 Temperature Sensor Lead Type Specifications and Test Methods p83 !Caution/Notice p84 Chip Type PRG/PRF Series Package p96 Lead Type PTGL/PTF Series Package p97 Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog.

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 o Part Numbering PTC Thermistors (POSISTORr) for Overcurrent Protection Chip Type (Part Number) PR G 18 BB 470 M B1 RB 1 2 3 4 5 6 7 8 1Product ID 6Resistance Tolerance Product ID Code Resistance Tolerance PR PTC Thermistors Chip Type M ±20% 2Series 7Individual Specifications Code Series Ex. Code Individual Specifications G for Overcurrent Protection p1 Structure, others 3Dimensions (LxW) 8Packaging Code Dimensions (LxW) EIA Code Packaging 15 1.00x0.50mm 0402 RA Embossed Taping (4mm Pitch) (4000 pcs.) 18 1.60x0.80mm 0603 RB Paper Taping (4mm Pitch) (4000 pcs.) 21 2.00x1.25mm 0805 RC Paper Taping (2mm Pitch) (10000 pcs.) RK Embossed Taping (4mm Pitch) (3000 pcs.) 4Temperature Characteristics Code Temperature Characteristics AR Curie Point 120°C BB Curie Point 100°C BC Curie Point 90°C 5Resistance Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code Resistance 4R7 4.7Ω 470 47Ω 471 470Ω 2

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 PTC Thermistors (POSISTORr) for Overheat Sensing Chip Type (Part Number) PR F 18 BB 471 Q B5 RB 1 2 3 4 5 6 7 8 1Product ID 5Resistance Product ID Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses PR PTC Thermistors Chip Type the number of zeros which follow the two figures. 2Series Ex. Code Resistance Code Series 471 470Ω F for Overheat Sensing 6Resistance Tolerance 3Dimensions (LxW) Code Resistance Tolerance Sensing Temp. Tolerance Code Dimensions (LxW) EIA Q Special Tolerance ±5°C 15 1.00x0.50mm 0402 R Special Tolerance ±3°C 18 1.60x0.80mm 0603 21 2.00x1.25mm 0805 7Individual Specifications Ex. Code Individual Specifications 4Temperature Characteristics Bp Structure, others Code Temperature Characteristics AS Curie Point 130°C 8Packaging AR Curie Point 120°C Code Packaging BA Curie Point 110°C RA Embossed Taping (4mm Pitch) (4000 pcs.) BB Curie Point 100°C RB Paper Taping (4mm Pitch) (4000 pcs.) BC Curie Point 90°C RC Paper Taping (2mm Pitch) (10000 pcs.) BD Curie Point 80°C BE Curie Point 70°C BF Curie Point 60°C BG Curie Point 50°C 3

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 PTC Thermistors (POSISTORr) for Overcurrent Protection / for Inrush Current Suppression / for Overheat Sensing Lead Type (Part Number) PT GL 07 AR 220 M 3P51 A0 1 2 3 4 5 6 7 8 1Product ID 5Resistance Product ID Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure PT PTC Thermistors expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In 2Series this case, all figures are significant digits. Code Series Ex. Code Resistance FL for Overheat Sensing Lead Type R22 0.22Ω FM for Overheat Sensing with Lug-terminal 2R2 2.2Ω for Current Control (Over Current Protection · 220 22Ω GL Inrush Current Suppression) Lead Type 6Resistance Tolerance 3Dimensions Code Resistance Tolerance Code Dimensions H ±25% 04 Nominal Body Diameter 4mm Series K ±10% 05 Nominal Body Diameter 5mm Series M ±20% 07 Nominal Body Diameter 7mm Series N ±30% 09 Nominal Body Diameter 9mm Series Q Special Tolerance 10 Nominal Body Diameter 10mm Series 12 Nominal Body Diameter 12mm Series 7Individual Specifications 13 Nominal Body Diameter 13mm Series Ex. Code Individual Specifications 14 Nominal Body Diameter 14mm Series 3P51 Lead Type, others 16 Nominal Body Diameter 16mm Series 18 Nominal Body Diameter 18mm Series 8Packaging 20 Nominal Body Diameter 20mm Series Code Packaging A* Ammo Pack 4Temperature Characteristics B* Bulk Code Temperature Characteristics AS Curie Point 130°C AR Curie Point 120°C BA Curie Point 110°C BB Curie Point 100°C BC Curie Point 90°C BD Curie Point 80°C BE Curie Point 70°C BF Curie Point 60°C BG Curie Point 50°C BH Curie Point 40°C 4

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 r Basic Characteristics of POSISTOR Basic Characteristics POSISTORr has three main characteristics. 1. Resistance - Temperature Characteristics Although there is a negligible difference between the Resistance - Temperature Characteristic normal and "Curie Point" temperature, POSISTORr 105 shows almost constant resistance-temperature characteristics. Yet they have resistance-temperature °C 104 BDBCBBAR 5 characteristics that cause resistance to sharply increase 2 R / when the temperature exceeds the Curie Point. o, R 103 The Curie Point (C.P.) is defined as the temperature at ati R which the resistance value is twice the one at 25°C. nge 102 a h C e nc 10 a st si e R 1 0 50 100 150 200 C.P. (AR: 120°C) Temperature (°C) 2. Current - Voltage Characteristics (Static Characteristic) This shows the relation between applied voltage when Current - Voltage Characteristic (Static Characteristic) voltage applied to POSISTORr causes balancing of inner heating and outer thermal dissipation and stabilized 103 Ta=25°C current. This has both a maximum point of current and constant output power. A) 102 m nt ( e urr C 10 1 2 0.1 1 10 10 Voltage (V) 3. Current - Time Characteristics (Dynamic Characteristic) This shows the relation between current and time before Current - Time Characteristic (Dynamic Characteristic) inner heating and outer thermal dissipation arrive at equilibrium state. This features having large initial current and abruptly continuous attenuating portion. 1.5 Ta=25°C A) ent ( 1.0 urr C 0.5 Time (sec.) 5

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 r Basic Characteristics of POSISTOR Technical Terms 1. Protective Threshold Current The maximum current value is called the "Protective Load Curve of Circuit and Voltage - Current Characteristics Threshold Current" for Voltage vs. Current of POSISTORr a Load curve in normal state characteristics (static). (normal current) When smaller than the protective threshold current b Load curve in abnormal state (abnormal current) flows in POSISTORr, it reaches its stability (as shown in c Voltage-current characteristics figure on right) at the intersection (A) of the load curve Vp of POSISTORr (a) and voltage-current characteristics of POSISTORr(c). b And POSISTORr works as a normal fixed resistor. og) c However, when larger than protective threshold current E RL nt (l e a flows, it stabilizes at the intersection (B) with the load I Curr A curve (b). I = E - Vp B RL Voltage (log) E 2. Protective Threshold Current Range Protective threshold current varies depending on the Protective Threshold Current Range ambient temperature, resistance value, temperature 1000 characteristics and shape. (see Figure on right) The maximum value of trip current and the minimum value of 800 the hold current are in the range of ambient temperature A) Trip Current -10 to +60°C. nt (m 600Protective Threshold Current That is, when a current is smaller than the hold current, e POSISTORr works only as a fixed resistor. When larger Curr 400 Hold Current than the trip current flows, however, POSISTORr 200 protects the circuit from overload. 0 -20 0 20 40 60 Ambient Temperature (°C) 3. Operating Time A period starting from the voltage input to the moment Operating Current current itself sharply attenuates is called "Operating Time." Conventionally, operation time (t0) is determined A) I0 to be the period until inrush current (I0) decreases to a nt ( level one half the original inrush current (I0/2). Curre I0 Operating Time 2 t0 Time (sec.) 6

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Selection Guide Please confirm the parameters according to the following questions. The best selection is the product that matches three parameters. o Confirmation Items What is the potential maximum How much current flows in the How much current flows in the voltage applied to POSISTORr? circuit at normal conditions? circuit at abnormal conditions? o Example Line Voltage 140V Usual Current 200mA Abnormal Current 580mA o Selection Standards voLlitn aeg e <= Moafx PimOuSmIS TvoOlRtarge cUursru eanlt <= oHf oPlOd ScIuSrTreOnRtr Acbunror ermnta l >= TrPipO ScuISrTreOnRt rof Max. Voltage Hold Trip Max. Current Resistance Body Thickness Part Number Current at +60°C Current at -10°C (at 25°C) Diameter (D) (T) (V) (mA) (mA) (A) (Ω) (mm) (mm) PTGL18AR4R7M6B72B0 125 360 900 1.7 4.7 ±20% 18.5 5.5 PTGL18AR3R3M6B72B0 125 420 1050 2.0 3.3 ±20% 18.5 5.5 PTGL07AR330M6A51B0 140 100 230 0.5 33 ±20% 7.4 6 PTGL07AS150K6B51B0 140 148 292 1.5 15 ±10% 7.3 4.5 PTGL09AS120K6B51B0 140 192 380 2.0 12 ±10% 9.3 4.5 PTGL09AS7R6K6B51B0 140 227 447 2.2 7.6 ±10% 9.3 4.5 PTGL13AR6R8M6C01B0 140 290 670 1.0 6.8 ±20% 14.0 6.0 PTGL12AS4R7K6B51B0 140 310 613 3.5 4.7 ±10% 11.5 4.5 PTGL09AS7R6K6B51B0 is the best selection in this case. 7

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Matrix Overcurrent Protection Overheat Sensing Series Chip type Lead type Chip type Lead type Application PRG PTGL PRF PTFL, PTFM AV equipment Plasma TV o o o o LCD TV o o o o Projection TV o o o o CATV o o o STB o o o Video camera o o Digital camera o o DVD recorder o o o Audio o o o o Electric keyboard, Electronic music instrument o o o o Digital mobile audio o o MD/CD player o o TV game o o o Portable game o o Information equipment Laptop o o Desktop computer o o Server o o o o Printer o o o o Scanner o o LCD display o o o o USB access device o HDD o CD/DVD-ROM/RAM o Copy machine o o o o Electronic dictionary/databook o o Electronic blackboard o o o o Communications equipment Electronic automatic exchange o o Transmission equipment o o PBX o o Cordless telephone o Fax machine o o o o Modem o o o Cellular phone o o Headset o Cellular phone base station o o o o Intercom o o Car electronics Engine control ECU o o Drive control ECU o o Air bag o o Anticollision radar o ABS/ESC o o Instrument/display panel, Meter o o Rechargeable battery for EV/HEV o o o Car air conditioner o HID/LED headlight, AFS o o o LED tail light o o o LED interior light o o Retractable electric mirror o o Door lock, trunk opener o Power seat o Shock absorber o VICS, ETC o Burglar alarm o o Car navigation o o o Car audio o o o o Home electronics Refrigerator o o o Household equipment Microwave, Oven o o o Electric rice-cooker o o IH cooking device o o Air conditioner o o o Fan heater o o Cleaner o o Clothes washer, cloth dryer o Ventilator o o Hot-water pot o o o Illumination device o o o o Massage chair, healthcare equipment o o o o Hot water spray toilet seat o o Electric power tool o o o o Power supply Switching supply o o o o Inverter power o o o o AC adapter, battery charger o o o 8

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Notes Inrush Current Limit for Power Supply POSISTORr Lead type: PTGL series 1. Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and protects itself against overcurrent situations. (1) High wattage power supply (flat display panels etc.) (2) Power supply for fluorescent lights (3) Other switching power supplies Replacement idea for a resistor and fuse solution POSISTORr + + - Load - Load 2. Benefits (1) Protection against overcurrent situations (2) Automatic reset from protective trip mode (3) Space-saving (4) Various characteristics to meet a suitable resistance value 3. Recommended part numbers Choose an appropriate part number based on the resistance value required to the inrush current limit. Review the maximum voltage. Max. Resistance Body Thickness Lead Lead More Application Part Number Voltage (at 25 °C) Diameter Space Diameter (V) (Ω) (mm) (mm) (mm) (mm) Details PTGL13AR100H8B72B0 10 ±25% 14.0 6.0 7.5 0.60 page 55 For high PTGL12AR150H8B72B0 15 ±25% 12.5 6.0 7.5 0.60 page 55 wattage power PTGL14AR180M9C01B0 18 ±20% 15.7 6.5 10.0 0.65 page 55 supply PTGL09AR250H8B52B0 265 25 ±25% 10.0 6.0 5.0 0.60 page 54 PTGL09AR390M9C61B0 39 ±20% 10.0 6.5 6.5 0.65 page 54 PTGL07AR560M9B51A0 56 ±20% 8.2 6.5 5.0 0.60 - For power supply of electronic PTGL07AR820M9B51A0 82 ±20% 8.2 6.5 5.0 0.60 - fluorescent PTGL07AS121M0N51A0 120 ±20% 7.8 6.0 5.0 0.50 page 64 ballasts 280 PTGL07AS181M0N51A0 180 ±20% 7.8 6.0 5.0 0.50 page 64 Please ask for details. 9

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Notes Overcurrent Protection for Communication Facility POSISTORr Lead type: PTGL series 1. Applications POSISTORr is an efficient device to protect a telephone line interface (SLIC: Subscriber-Loop-Interface-Circuit) against AC line contact. (1) Landline telephones or FAX machines (2) Telephone interface of STB, VoIP equipment (3) Any other equipment of communication facility having a phone line interface Replacement idea for a current fuse. Ring Ring POSISTORr SLIC SLIC Tip Tip 2. Benefits (1) Automatic reset from protective trip up to 265V AC line contact (2) Compatible with the 600V over voltage test by UL60950 (3) High resistance to the lighting surge (*A surge absorber is still required to protect SLIC) 3. Recommended part numbers Choose an appropriate part number based on the hold current and on the resistance value required to the operation current of SLIC. Max. Max. Hold Current Trip Current Resistance Body Thickness Lead Lead More Part Number Voltage Current (at +60 °C) (at -10 °C) (at +25 °C) Diameter Space Diameter (V) (A) (mA) (mA) (Ω) (mm) (mm) (mm) (mm) Details PTGL07BB220N0B52A0 250 0.5 90 300 22 ±30% 8.0 6.0 5.0 0.6 page 54 PTGL09AR390N0B52A0 250 0.6 100 280 39 ±30% 10.0 6.0 5.0 0.6 page 54 PTGL09AR250H8B52B0 265 1.0 118 330 25 ±25% 10.0 6.0 5.0 0.6 page 54 Please ask for details. 10

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Notes Current Limiter for LED Chip POSISTORr: PRG series 1. Applications POSISTORr is an effective current limit solution based on LED's allowable current and temperature characteristics. (1) LED lighting instruments (2) LED backlight of flat displays See below figures. Protected by Higher brightness vs. POSISTORr a fixed resistor IC IC nt nt e e urr urr C C D D E E L L Current Limit by a fixed resistor Allowable LED Allowable LED Working Zone Working Zone Ambient Temp. Ambient Temp. LED Driving Circuit LED Current 2. Benefits (1) Higher LED brightness versus a fixed resistor. LED can work in the smaller series resistance with POSISTORr at normal operation temperature. The number of LEDs is possibly reduced. (2) LED lifetime may be extended due to the current limiting function of the POSISTORr in cases of overheat or overcurrent situation. (3) Small 0805 package allows the POSISTORr to be placed close to the LED. It offers accurate detection of ambient temperature near LED and increases flexibility of packaging. 3. Recommended part numbers Choose an appropriate part number having max. voltage and resistance value. Review the protective threshold current range based on the operating current and temperature of the LED. Max. Max. Hold Current Trip Current Resistance Curie Point More Part Number Voltage Current (at +60 °C) (at -10 °C) (at +25 °C) (V) (A) (mA) (mA) (Ω) (°C) * Details PRG21BC0R6MM1RA 6 10 285 1100 0.6 ±20% 90 page 14 PRG21BC0R2MM1RA 6 10 500 2000 0.2 ±20% 90 page 14 PRG21BC1R0MM1RA 12 10 220 850 1.0 ±20% 90 page 14 PRG21BC2R2MM1RA 16 6.5 150 600 2.2 ±20% 90 page 14 PRG21BC3R3MM1RA 20 6.0 120 480 3.3 ±20% 90 page 14 PRG21BC6R8MM1RA 30 3.5 80 320 6.8 ±20% 90 page 14 PRG21BC4R7MM1RA 30 5.0 100 400 4.7 ±20% 90 page 14 *Curie Point means the temperature at which the resistance value reaches twice the resistance at 25°C. Please ask for details. 11

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Notes Overheat/Overcurrent Protection for High Brightness LED Leaded POSISTORr: PTGL series & Chip POSISTORr: PRG series 1. Applications POSISTORr is an effective solution to protect the LED against overheat and overcurrent situation. (1) LED lighting instruments (Appliances, Automotive etc.) a) Overcurrent Resistance up !! Heat up by overcurrent ! b) Overheat Resistance up !! Heat up by overheat situation ! 2. Benefits (1) Posistor installed in series with LED provides both (3) Automatic reset from protective trip mode overheat and overcurrent protection (4) 0603 and 0805 SMD type available (smaller than (2) No additional driver IC or software required 1/2W or 1W chip resistor) 3. Recommended part numbers Choose an appropriate part number having max. voltage current range based on the operating current and and resistance value. Review the protective threshold temperature of the LED. Max. Max. Hold Current Trip Current Resistance Curie Point More Type Part Number Voltage Current (at +60 °C) (at -10 °C) (at +25 °C) (V) (A) (mA) (mA) (Ω) (°C) * Details PRG21BC0R6MM1RA 6 10 285 1100 0.6 ±20% 90 page 14 PRG21BC0R2MM1RA 6 10 500 2000 0.2 ±20% 90 page 14 PRG21BC1R0MM1RA 12 10 220 850 1.0 ±20% 90 page 14 SMD PRG21BC2R2MM1RA 16 9.0 150 600 2.2 ±20% 90 page 14 type PRG21BC3R3MM1RA 20 7.5 120 480 3.3 ±20% 90 page 14 PRG21BC6R8MM1RA 30 5.5 80 320 6.8 ±20% 90 page 14 PRG21BC4R7MM1RA 30 8.0 100 400 4.7 ±20% 90 page 14 PTGL04AS100K2N51B0 30 1.5 122 240 10 ±10% 130 page 27 PTGL04AS100K2B51B0 30 2.0 167 330 10 ±10% 130 page 27 PTGL05AS3R9K2B51B0 30 3.5 269 530 3.9 ±10% 130 page 27 PTGL07AS2R7K2B51B0 30 4.5 336 663 2.7 ±10% 130 page 27 PTGL07AS1R8K2B51B0 30 5.0 420 829 1.8 ±10% 130 page 27 PTGL09AS1R2K2B51B0 30 6.0 556 1097 1.2 ±10% 130 page 27 PTGL12AS0R8K2B51B0 30 7.0 685 1352 0.8 ±10% 130 page 27 PTGL04AS100K3B51B0 51 1.0 168 332 10 ±10% 130 page 30 PTGL05AS6R8K3B51B0 51 1.5 197 388 6.8 ±10% 130 page 30 Lead PTGL07AS3R3K3B51B0 51 3.0 307 606 3.3 ±10% 130 page 30 type PTGL09AS2R2K3B51B0 51 4.0 412 814 2.2 ±10% 130 page 30 PTGL12AS1R2K3B51B0 51 5.0 592 1168 1.2 ±10% 130 page 30 PTGL07AR220M3P51B0 56 1.0 90 240 22 ±20% 120 page 46 PTGL07AR8R2M3P51B0 56 1.0 130 350 8.2 ±20% 120 page 46 PTGL09AR150M3B51B0 56 1.2 150 400 15 ±20% 120 page 46 PTGL10AR3R9M3P51B0 56 2.0 210 550 3.9 ±20% 120 page 46 PTGL09AR4R7M3B51B0 56 2.0 270 700 4.7 ±20% 120 page 46 PTGL10AR3R9M3B51B0 56 2.0 300 800 3.9 ±20% 120 page 46 PTGL14AR3R3M3B71B0 56 2.5 380 980 3.3 ±20% 120 page 46 * Curie Point means the temperature at which the resistance value reaches twice the resistance at 25°C. Please ask for details. 12

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection 1 Overcurrent Protection Chip Type e g e Overcurrent Protection device with resettable function suitable for current limiting resistor. This product is a chip type PTC thermistor for overcurrent protection that is suitable for the T following. L W · Countermeasure for short circuit testing Dimensions (mm) · Current limiting resistor Part Number L W T e g PRG15_RC1.0±0.050.5±0.050.5±0.050.15 to 0.35 - Features PRG18_RB 1.6±0.150.8±0.150.8±0.150.1 to 0.6 - PRG21_RA 2.0±0.21.25±0.2 0.9±0.2 0.2 min. 0.5 min. 1. Rapid operation to protect the circuit in an PRG21_RK 2.0±0.21.25±0.21.25±0.2 0.2 min. 0.5 min. overcurrent condition abnormality such as a short circuit. By removing the overcurrent condition, these products automatically return to the initial condition and can be used repeatedly. 2. Suitable for countermeasure to short circuit test in safety standard. 3. Stable resistance after operation due to ceramic PTC. 4. Similar size (0603 size) is possible due to the large capacity for electric power. 5. Possible to use these products as current limiting resistors with overcurrent protection functions 6. The SMD type's small size and light weight are helpful in miniaturizing the circuit. Chip Type 0402(1005) Size Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) (V) (mA) (mA) (mA) (mA) (mA) (Ω) PRG15BC680MM1RC 30 17 26 52 65 600 68±20% PRG15BC470MM1RC 30 20 32 62 78 800 47±20% PRG15BC330MM1RC 30 25 38 73 92 1200 33 ±20% PRG15BC220MM1RC 24 28 43 90 113 1400 22 ±20% PRG15BC180MM1RC 24 31 47 98 125 1700 18 ±20% PRG15BC4R7MM1RC 9 60 91 172 216 2500 4.7 ±20% PRG15BC3R3MM1RC 9 71 110 205 260 3500 3.3 ±20% PRG15BC2R2MM1RC 6 88 134 252 318 3500 2.2 ±20% Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. Chip Type 0603(1608) Size Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) (V) (mA) (mA) (mA) (mA) (mA) (Ω) PRG18BB471MB1RB 24 7 10 21 25 60 470 ±20% PRG18BB221MB1RB 24 10 14 29 35 130 220 ±20% PRG18BB101MB1RB 24 15 21 45 55 300 100 ±20% Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. This series is recognized by UL. Continued on the following page. 13

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. 1 Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) (V) (mA) (mA) (mA) (mA) (mA) (Ω) PRG18BB470MB1RB 24 20 29 61 75 630 47 ±20% PRG18BB330MB1RB 24 25 36 71 85 900 33 ±20% PRG18BC220MM1RB 30 37 54 113 145 1800 22±20% PRG18BC150MM1RB 30 45 64 135 180 2500 15±20% PRG18BC100MM1RB 30 55 80 165 220 3800 10±20% PRG18BC6R8MM1RB 20 80 120 260 320 3500 6.8 ±20% PRG18BC4R7MM1RB 20 100 155 330 400 5000 4.7 ±20% PRG18BC3R3MM1RB 16 120 180 400 480 6000 3.3 ±20% PRG18BC2R2MM1RB 12 150 220 500 600 6500 2.2 ±20% PRG18BC1R0MM1RB 6 220 330 740 850 7500 1.0 ±20% Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. This series is recognized by UL. Chip Type 0805(2012) Size Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) (V) (mA) (mA) (mA) (mA) (mA) (Ω) PRG21BC6R8MM1RK 32 80 120 260 320 5800 6.8±20% PRG21BC4R7MM1RK 32 100 155 330 400 8500 4.7±20% PRG21BC6R8MM1RA 30 80 120 260 320 5500 6.8 ±20% PRG21BC4R7MM1RA 30 100 155 330 400 8000 4.7 ±20% PRG21BC3R3MM1RK 30 120 180 400 480 11000 3.3±20% PRG21BC2R2MM1RK 27 150 220 500 600 15000 2.2±20% PRG21BB220MB1RK 20 30 44 91 110 1100 22 ±20% PRG21BB150MB1RK 20 40 59 116 140 1600 15 ±20% PRG21AR420MB1RA 20 40 54 100 120 590 42±20% PRG21BC3R3MM1RA 20 120 180 400 480 7500 3.3 ±20% PRG21BC1R5MM1RK 18 170 250 560 700 15000 1.5±20% PRG21AR220MB1RK 16 60 75 195 225 900 22±20% PRG21BC2R2MM1RA 16 150 220 500 600 9000 2.2 ±20% PRG21BC1R0MM1RK 16 220 330 740 850 20000 1.0±20% PRG21BC0R8MM1RK 14 230 340 760 940 21000 0.8±20% PRG21BC0R6MM1RK 13.2 285 420 920 1100 27000 0.6±20% PRG21BC1R0MM1RA 12 220 330 740 850 10000 1.0 ±20% PRG21BC0R4MM1RK 12 330 480 1080 1350 37000 0.4±20% PRG21BC0R6MM1RA 6 285 420 920 1100 10000 0.6 ±20% PRG21BC0R2MM1RA 6 500 750 1620 2000 10000 0.2 ±20% Maximum Current shows typical capacities of the transformer which can be used. This series is applied to reflow soldering. This series is recognized by UL. Standard Land Pattern Dimensions Solder resist Chip Land c b a (in mm) Soldering Dimensions (mm) Part Number Methods Chip (LxW) a b c PRG15 Reflow Soldering 1.0x0.5 0.5 0.4-0.5 0.5 PRG18 Reflow Soldering 1.6x0.8 0.6-0.80.6-0.70.6-0.8 PRG21 Reflow Soldering 2.0x1.25 1.0-1.20.5-0.71.0-1.2 14

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Protective Threshold Current Range 1 PRG15BC680MM1RC PRG15BC470MM1RC 100 100 90 90 Trip Current 80 80 Trip Current 70 70 A) 60 A) 60 m m ent ( 50 ent ( 50 Protective Threshold Current urr 40 Protective Threshold Current urr 40 C C 30 30 20 20 Hold Current Hold Current 10 10 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG15BC330MM1RC PRG15BC220MM1RC 120 140 120 100 Trip Current Trip Current 100 80 A) A) m m 80 nt ( 60 nt ( e e urr Protective Threshold Current urr 60 Protective Threshold Current C C 40 40 Hold Current Hold Current 20 20 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG15BC180MM1RC PRG15BC4R7MM1RC 140 250 120 Trip Current 200 Trip Current 100 A) A)150 m 80 m nt ( Protective Threshold Current nt ( Protective Threshold Current e e urr 60 urr100 C C 40 Hold Current 50 Hold Current 20 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG15BC3R3MM1RC PRG15BC2R2MM1RC 300 400 350 250 Trip Current Trip Current 300 200 A) A)250 m m nt (150 Protective Threshold Current nt (200 Curre Curre150 Protective Threshold Current 100 100 Hold Current Hold Current 50 50 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 15

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. 1 Protective Threshold Current Range PRG18BB471MB1RB PRG18BB221MB1RB 30 40 35 25 Trip Current Trip Current 30 20 A) A) 25 m m nt ( 15 Protective Threshold Current nt ( 20 Protective Threshold Current e e Curr Curr 15 10 10 Hold Current Hold Current 5 5 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG18BB101MB1RB PRG18BB470MB1RB 60 90 80 50 Trip Current 70 Trip Current 40 60 A) A) m m 50 nt ( 30 Protective Threshold Current nt ( Protective Threshold Current urre urre 40 C C 20 30 Hold Current 20 Hold Current 10 10 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG18BB330MB1RB PRG18BC220MM1RB 100 180 90 160 Trip Current 80 Trip Current 140 70 120 A) 60 A) m m100 urrent ( 4500 Protective Threshold Current urrent ( 80 Protective Threshold Current C C 60 30 20 Hold Current 40 Hold Current 10 20 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG18BC150MM1RB PRG18BC100MM1RB 200 250 180 Trip Current Trip Current 160 200 140 A)120 A)150 m m nt (100 Protective Threshold Current nt ( Protective Threshold Current e e urr 80 urr100 C C 60 40 50 Hold Current Hold Current 20 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 16

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range 1 PRG18/21BC6R8M Type PRG18/21BC4R7M Type 400 450 350 400 Trip Current Trip Current 350 300 300 A)250 A) m m250 nt (200 nt ( Protective Threshold Current Curre150 Protective Threshold Current Curre200 150 100 Hold Current 100 Hold Current 50 50 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG18/21BC3R3M Type PRG18/21BC2R2M Type 600 700 600 500 Trip Current Trip Current 500 400 A) A) m m400 nt (300 Protective Threshold Current nt ( Protective Threshold Current e e urr urr300 C C 200 200 Hold Current Hold Current 100 100 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG18/21BC1R0M Type PRG21BB220MB1RK 1000 140 900 120 800 Trip Current Trip Current 700 100 A) 600 A) m m 80 nt ( 500 Protective Threshold Current nt ( e e urr 400 urr 60 Protective Threshold Current C C 300 40 200 Hold Current Hold Current 20 100 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG21BB150MB1RK PRG21AR420MB1RA 160 140 140 120 Trip Current Trip Current 120 100 A)100 A) m m 80 Protective Threshold Current nt ( 80 Protective Threshold Current nt ( e e Curr 60 Curr 60 40 40 Hold Current Hold Current 20 20 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 17

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. 1 Protective Threshold Current Range PRG21BC1R5MM1RK PRG21AR220MB1RK 800 300 700 Trip Current 250 Trip Current 600 200 A)500 A) m m ent (400 Protective Threshold Current ent (150 Protective Threshold Current Curr300 Curr 100 200 Hold Current 50 Hold Current 100 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG21BC0R8MM1RK PRG21BC0R6M Type 1200 1400 1000 Trip Current 1200 Trip Current 1000 800 A) A) m m 800 ent ( 600 Protective Threshold Current ent ( Protective Threshold Current urr urr 600 C C 400 400 Hold Current 200 Hold Current 200 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) PRG21BC0R4MM1RK PRG21BC0R2MM1RA 1600 2500 1400 Trip Current 2000 Trip Current 1200 A)1000 A)1500 m m nt ( 800 Protective Threshold Current nt ( Curre 600 Curre1000 Protective Threshold Current 400 Hold Current 500 Hold Current 200 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Ambient Temperature (°C) Ambient Temperature (°C) Operating Time (Typical Curve) PRG15BC680MM1RC PRG15BC470MM1RC 1 1 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 0.1 me (sec.) 0.1 Operating Ti 0.01 Operating Ti 0.01 0.001 0.001 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) Continued on the following page. 18

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time (Typical Curve) 1 PRG15BC330MM1RC PRG15BC220MM1RC 1 1 -++126050°°°CCCATemmbpie.nt -++126050°°°CCCATemmbpie.nt me (sec.) 0.1 me (sec.) 0.1 Operating Ti 0.01 Operating Ti 0.01 0.001 0.001 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG15BC180MM1RC PRG15BC4R7MM1RC 1 1 -++126050°°°CCCATemmbpie.nt -10°C 0.1 +25°C Ambient me (sec.) 0.1 me (sec.) +60°C Temp. Operating Ti 0.01 Operating Ti 0.01 0.001 0.001 0.0001 10 100 1000 100 1000 10000 Overcurrent (mA) Current (mA) PRG15BC3R3MM1RC PRG15BC2R2MM1RC 1 1 0.1 -10°C 0.1 -++126050°°°CCCATemmbpie.nt +25°C Ambient me (sec.) +60°C Temp. me (sec.) Operating Ti 0.01 Operating Ti 0.01 0.001 0.001 0.0001 0.0001 100 1000 10000 100 1000 10000 Current (mA) Overcurrent (mA) PRG18BB471MB1RB PRG18BB221MB1RB 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 10 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) Continued on the following page. 19

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. 1 Operating Time (Typical Curve) PRG18BB101MB1RB PRG18BB470MB1RB 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. 1 me (sec.) 1 me (sec.) Operating Ti0.1 Operating Ti 0.1 0.01 0.01 0.001 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG18BB330MB1RB PRG18BC220MM1RB 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. 1 me (sec.) me (sec.) 1 Operating Ti 0.1 Operating Ti0.1 0.01 0.001 0.01 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG18BC150MM1RB PRG18BC100MM1RB 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) Operating Ti0.1 Operating Ti 1 0.01 0.1 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG18BC6R8MM1RB PRG18BC4R7MM1RB 10 10 -10°C -10°C Ambient +25°C +25°C Ambient Temp. +60°C +60°C Temp. me (sec.) me (sec.) Operating Ti 1 Operating Ti 1 0.1 0.1 10 100 1000 10 100 1000 10000 Overcurrent (mA) Overcurrent (mA) Continued on the following page. 20

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time (Typical Curve) 1 PRG18BC3R3MM1RB PRG18BC2R2MM1RB 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) me (sec.) Operating Ti 1 Operating Ti 1 0.1 0.1 10 100 1000 10000 10 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG18BC1R0MM1RB PRG21BC6R8MM1RK 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) me (sec.) 1 Operating Ti 1 Operating Ti0.1 0.1 0.01 10 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21BC4R7MM1RK PRG21BC6R8MM1RA 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21BC4R7MM1RA PRG21BC3R3MM1RK 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) Continued on the following page. 21

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. 1 Operating Time (Typical Curve) PRG21BC2R2MM1RK PRG21BB220MB1RK 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG21BB150MB1RK PRG21AR420MB1RA 10 10 -10°C -10°C Ambient +25°C +25°C Ambient Temp. +60°C +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 10 100 1000 10 100 1000 Overcurrent (mA) Overcurrent (mA) PRG21BC3R3MM1RA PRG21BC1R5MM1RK 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21AR220MB1RK PRG21BC2R2MM1RA 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 10 100 1000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) Continued on the following page. 22

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time (Typical Curve) 1 PRG21BC1R0MM1RK PRG21BC0R8MM1RK 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21BC0R6MM1RK PRG21BC1R0MM1RA 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21BC0R4MM1RK PRG21BC0R6MM1RA 10 10 -10°C -10°C +25°C Ambient +25°C Ambient +60°C Temp. +60°C Temp. me (sec.) 1 me (sec.) 1 Operating Ti0.1 Operating Ti0.1 0.01 0.01 100 1000 10000 100 1000 10000 Overcurrent (mA) Overcurrent (mA) PRG21BC0R2MM1RA 10 -10°C +25°C Ambient +60°C Temp. me (sec.) 1 Operating Ti0.1 0.01 100 1000 10000 Overcurrent (mA) 23

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 1 Chip Type Specifications and Test Methods PRG15 Series No. Item Rating Value Method of Examination (cid:24)(cid:35)(cid:43)(cid:46)(cid:35)(cid:48)(cid:31)(cid:50)(cid:51)(cid:48)(cid:35)(cid:3)(cid:48)(cid:31)(cid:44)(cid:37)(cid:35)(cid:3)(cid:50)(cid:38)(cid:31)(cid:50)(cid:3)(cid:46)(cid:35)(cid:48)(cid:43)(cid:39)(cid:50)(cid:3)(cid:50)(cid:45)(cid:3)(cid:31)(cid:46)(cid:46)(cid:42)(cid:55)(cid:3)(cid:43)(cid:31)(cid:54)(cid:64)(cid:3)(cid:52)(cid:45)(cid:42)(cid:50)(cid:31)(cid:37)(cid:35)(cid:3)(cid:50)(cid:45)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3) 1 Operating Temp. Range (cid:81)(cid:123)(cid:122)(cid:3)(cid:50)(cid:45)(cid:3)(cid:141)(cid:128)(cid:122)(cid:157)(cid:7) (cid:20)(cid:45)(cid:49)(cid:39)(cid:49)(cid:50)(cid:45)(cid:48)r. It is measured by below flow. (cid:123)(cid:74)(cid:3)(cid:5)(cid:46)(cid:46)(cid:42)(cid:39)(cid:35)(cid:34)(cid:3)(cid:43)(cid:31)(cid:54)(cid:64)(cid:3)(cid:52)(cid:45)(cid:42)(cid:50)(cid:31)(cid:37)(cid:35)(cid:3)(cid:36)(cid:45)(cid:48)(cid:3)(cid:125)(cid:3)(cid:43)(cid:39)(cid:44)(cid:64) 2 Resistance Value at 25°C (cid:27)(cid:39)(cid:50)(cid:38)(cid:39)(cid:44)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3)(cid:49)(cid:46)(cid:35)(cid:33)(cid:39)(cid:113)(cid:35)(cid:34)(cid:3)(cid:48)(cid:31)(cid:44)(cid:37)(cid:35) (cid:124)(cid:74)(cid:3)(cid:23)(cid:50)(cid:45)(cid:48)(cid:31)(cid:37)(cid:35)(cid:3)(cid:124)(cid:3)(cid:38)(cid:48)(cid:49)(cid:3)(cid:39)(cid:44)(cid:3)(cid:48)(cid:45)(cid:45)(cid:43)(cid:3)(cid:50)(cid:35)(cid:43)(cid:46)(cid:35)(cid:48)(cid:31)(cid:50)(cid:51)(cid:48)(cid:35) 3) Measured by four-terminal method with less than 1mA (DC0.1V). (cid:24)(cid:38)(cid:35)(cid:3)(cid:52)(cid:45)(cid:42)(cid:50)(cid:31)(cid:37)(cid:35)(cid:3)(cid:53)(cid:38)(cid:39)(cid:33)(cid:38)(cid:3)(cid:48)(cid:39)(cid:49)(cid:35)(cid:49)(cid:3)(cid:37)(cid:48)(cid:31)(cid:34)(cid:51)(cid:31)(cid:42)(cid:42)(cid:55)(cid:3)(cid:50)(cid:45)(cid:3)(cid:123)(cid:124)(cid:122)(cid:139)(cid:3)(cid:45)(cid:36)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3)(cid:43)(cid:31)(cid:54)(cid:64)(cid:3)(cid:52)(cid:45)(cid:42)(cid:50)(cid:31)(cid:37)(cid:35)(cid:3) (cid:31)(cid:46)(cid:46)(cid:42)(cid:39)(cid:35)(cid:49)(cid:3)(cid:50)(cid:45)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3)(cid:20)(cid:45)(cid:49)(cid:39)(cid:49)(cid:50)(cid:45)(cid:48)r(cid:3)(cid:36)(cid:45)(cid:48)(cid:3)(cid:123)(cid:130)(cid:122)(cid:151)(cid:127)(cid:3)(cid:49)(cid:35)(cid:33)(cid:64)(cid:3)(cid:31)(cid:50)(cid:3)(cid:124)(cid:127)(cid:157)(cid:7)(cid:64) 3 Withstanding Voltage Without damage (cid:72)(cid:5)(cid:3)(cid:46)(cid:48)(cid:45)(cid:50)(cid:35)(cid:33)(cid:50)(cid:39)(cid:52)(cid:35)(cid:3)(cid:48)(cid:35)(cid:49)(cid:39)(cid:49)(cid:50)(cid:45)(cid:48)(cid:3)(cid:39)(cid:49)(cid:3)(cid:50)(cid:45)(cid:3)(cid:32)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:44)(cid:35)(cid:33)(cid:50)(cid:35)(cid:34)(cid:3)(cid:39)(cid:44)(cid:3)(cid:49)(cid:35)(cid:48)(cid:39)(cid:35)(cid:49)(cid:65)(cid:3)(cid:31)(cid:44)(cid:34)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3) (cid:39)(cid:44)(cid:48)(cid:51)(cid:49)(cid:38)(cid:3)(cid:33)(cid:51)(cid:48)(cid:48)(cid:35)(cid:44)(cid:50)(cid:3)(cid:50)(cid:38)(cid:48)(cid:45)(cid:51)(cid:37)(cid:38)(cid:3)(cid:20)(cid:45)(cid:49)(cid:39)(cid:49)(cid:50)(cid:45)(cid:48)r(cid:3)(cid:43)(cid:51)(cid:49)(cid:50)(cid:3)(cid:32)(cid:35)(cid:3)(cid:42)(cid:39)(cid:43)(cid:39)(cid:50)(cid:35)(cid:34)(cid:3)(cid:32)(cid:35)(cid:42)(cid:45)(cid:53)(cid:3)(cid:43)(cid:31)(cid:54)(cid:64)(cid:3) rated value.) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:128)(cid:3)(cid:72)(cid:123)(cid:131)(cid:131)(cid:127)(cid:74) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) (cid:3)(cid:70)(cid:3)(cid:10)(cid:48)(cid:35)(cid:47)(cid:51)(cid:35)(cid:44)(cid:33)(cid:55)(cid:3)(cid:48)(cid:31)(cid:44)(cid:37)(cid:35)(cid:66)(cid:3)(cid:123)(cid:122)(cid:3)(cid:50)(cid:45)(cid:3)(cid:127)(cid:127)(cid:12)(cid:56) (cid:70)(cid:3)(cid:22)(cid:35)(cid:49)(cid:39)(cid:49)(cid:50)(cid:31)(cid:44)(cid:33)(cid:35)(cid:3)(cid:72)(cid:22)(cid:124)(cid:127)(cid:74)(cid:3)(cid:33)(cid:38)(cid:31)(cid:44)(cid:37)(cid:35)(cid:66)(cid:3)(cid:16)(cid:35)(cid:49)(cid:49)(cid:3)(cid:50)(cid:38)(cid:31)(cid:44)(cid:3)(cid:151)(cid:124)(cid:122)(cid:139)(cid:3)(cid:63)(cid:123) 4 Vibration (cid:3)(cid:70)(cid:3)(cid:5)(cid:43)(cid:46)(cid:42)(cid:39)(cid:50)(cid:51)(cid:34)(cid:35)(cid:66)(cid:3)(cid:123)(cid:64)(cid:127)(cid:43)(cid:43) (cid:70)(cid:3)(cid:5)(cid:46)(cid:46)(cid:35)(cid:31)(cid:48)(cid:31)(cid:44)(cid:33)(cid:35)(cid:66)(cid:3)(cid:18)(cid:45)(cid:3)(cid:34)(cid:35)(cid:36)(cid:35)(cid:33)(cid:50)(cid:49)(cid:3)(cid:45)(cid:48)(cid:3)(cid:31)(cid:32)(cid:44)(cid:45)(cid:48)(cid:43)(cid:31)(cid:42)(cid:39)(cid:50)(cid:39)(cid:35)(cid:49) (cid:3)(cid:70)(cid:3)(cid:23)(cid:53)(cid:35)(cid:35)(cid:46)(cid:3)(cid:48)(cid:31)(cid:50)(cid:35)(cid:66)(cid:3)(cid:123)(cid:3)(cid:45)(cid:33)(cid:50)(cid:31)(cid:52)(cid:35)(cid:71)(cid:43)(cid:39)(cid:44)(cid:64) (cid:3)(cid:70)(cid:3)(cid:8)(cid:39)(cid:48)(cid:35)(cid:33)(cid:50)(cid:39)(cid:45)(cid:44)(cid:66)(cid:3)(cid:28)(cid:81)(cid:29)(cid:81)(cid:30)(cid:3)(cid:72)(cid:125)(cid:3)(cid:34)(cid:39)(cid:48)(cid:35)(cid:33)(cid:50)(cid:39)(cid:45)(cid:44)(cid:74) (cid:3)(cid:70)(cid:3)(cid:124)(cid:126)(cid:3)(cid:33)(cid:55)(cid:33)(cid:42)(cid:35)(cid:49)(cid:3)(cid:39)(cid:44)(cid:3)(cid:35)(cid:31)(cid:33)(cid:38)(cid:3)(cid:31)(cid:54)(cid:39)(cid:49) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:127)(cid:130)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:126)(cid:74) 5 Solderability Wetting of soldering area: (cid:148)= (cid:129)(cid:127)(cid:139) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:66)(cid:3)(cid:23)(cid:44)(cid:81)(cid:125)(cid:64)(cid:122)(cid:5)(cid:37)(cid:81)(cid:122)(cid:64)(cid:127)(cid:7)(cid:51) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:3)(cid:50)(cid:35)(cid:43)(cid:46)(cid:64)(cid:66)(cid:3)(cid:124)(cid:126)(cid:127)(cid:151)(cid:127)(cid:157)(cid:7) (cid:3)(cid:70)(cid:3)(cid:13)(cid:43)(cid:43)(cid:35)(cid:48)(cid:49)(cid:39)(cid:45)(cid:44)(cid:3)(cid:50)(cid:39)(cid:43)(cid:35)(cid:66)(cid:3)(cid:125)(cid:151)(cid:122)(cid:64)(cid:125)(cid:3)(cid:49) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:127)(cid:130)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:126)(cid:74) [Reflow method] (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:66)(cid:3)(cid:23)(cid:44)(cid:81)(cid:125)(cid:64)(cid:122)(cid:5)(cid:37)(cid:81)(cid:122)(cid:64)(cid:127)(cid:7)(cid:51) (cid:3)(cid:70)(cid:3)(cid:20)(cid:48)(cid:35)(cid:38)(cid:35)(cid:31)(cid:50)(cid:66)(cid:3)(cid:141)(cid:123)(cid:127)(cid:122)(cid:3)(cid:50)(cid:45)(cid:3)(cid:141)(cid:123)(cid:130)(cid:122)(cid:157)(cid:7)(cid:65)(cid:3)(cid:123)(cid:124)(cid:122)(cid:151)(cid:127)(cid:3)(cid:49) 6 Resistance to Soldering Heat (cid:3)(cid:70)(cid:3)(cid:20)(cid:35)(cid:31)(cid:41)(cid:3)(cid:50)(cid:35)(cid:43)(cid:46)(cid:64)(cid:66)(cid:3)(cid:124)(cid:128)(cid:122)(cid:151)(cid:127)(cid:157)(cid:7) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:39)(cid:44)(cid:37)(cid:3)(cid:50)(cid:39)(cid:43)(cid:35)(cid:66)(cid:3)(cid:148)(cid:124)(cid:124)(cid:122)(cid:157)(cid:7)(cid:65)(cid:3)(cid:128)(cid:122)(cid:3)(cid:50)(cid:45)(cid:3)(cid:131)(cid:122)(cid:3)(cid:49) (cid:3)(cid:70)(cid:3)(cid:22)(cid:35)(cid:114)(cid:45)(cid:53)(cid:3)(cid:33)(cid:55)(cid:33)(cid:42)(cid:35)(cid:66)(cid:3)(cid:123)(cid:3)(cid:50)(cid:39)(cid:43)(cid:35) (cid:3)(cid:70)(cid:3)(cid:24)(cid:35)(cid:49)(cid:50)(cid:3)(cid:32)(cid:45)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:11)(cid:48)(cid:31)(cid:49)(cid:49)(cid:81)(cid:9)(cid:46)(cid:45)(cid:54)(cid:55)(cid:3)(cid:50)(cid:35)(cid:49)(cid:50)(cid:3)(cid:32)(cid:45)(cid:31)(cid:48)(cid:34)(cid:3)(cid:72)(cid:10)(cid:22)(cid:81)(cid:126)(cid:74)(cid:3)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:45)(cid:51)(cid:48)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:3) land size *2 (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:124)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:129)(cid:74) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) 7 High Temperature Storage (cid:3)(cid:70)(cid:3)(cid:141)(cid:128)(cid:122)(cid:151)(cid:124)(cid:157)(cid:7) (cid:3)(cid:70)(cid:3)(cid:123)(cid:122)(cid:122)(cid:122)(cid:141)(cid:126)(cid:130)(cid:71)(cid:81)(cid:122)(cid:3)(cid:38)(cid:48)(cid:49)(cid:64) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:123)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:129)(cid:74) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) 8 Low Temperature Storage (cid:3)(cid:70)(cid:3)(cid:81)(cid:123)(cid:122)(cid:151)(cid:125)(cid:157)(cid:7) (cid:3)(cid:70)(cid:3)(cid:123)(cid:122)(cid:122)(cid:122)(cid:141)(cid:126)(cid:130)(cid:71)(cid:81)(cid:122)(cid:3)(cid:38)(cid:48)(cid:49) (cid:70)(cid:3)(cid:22)(cid:35)(cid:49)(cid:39)(cid:49)(cid:50)(cid:31)(cid:44)(cid:33)(cid:35)(cid:3)(cid:72)(cid:22)(cid:124)(cid:127)(cid:74)(cid:3)(cid:33)(cid:38)(cid:31)(cid:44)(cid:37)(cid:35)(cid:66)(cid:3)(cid:16)(cid:35)(cid:49)(cid:49)(cid:3)(cid:50)(cid:38)(cid:31)(cid:44)(cid:3)(cid:151)(cid:124)(cid:122)(cid:139)(cid:3)(cid:63)(cid:123) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:128)(cid:129)(cid:3)(cid:72)(cid:123)(cid:131)(cid:131)(cid:127)(cid:74) (cid:70)(cid:3)(cid:5)(cid:46)(cid:46)(cid:35)(cid:31)(cid:48)(cid:31)(cid:44)(cid:33)(cid:35)(cid:66)(cid:3)(cid:18)(cid:45)(cid:3)(cid:34)(cid:35)(cid:36)(cid:35)(cid:33)(cid:50)(cid:49)(cid:3)(cid:45)(cid:48)(cid:3)(cid:31)(cid:32)(cid:44)(cid:45)(cid:48)(cid:43)(cid:31)(cid:42)(cid:39)(cid:50)(cid:39)(cid:35)(cid:49) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) 9 Damp Heat, Steady State (cid:3)(cid:70)(cid:3)(cid:141)(cid:126)(cid:122)(cid:151)(cid:124)(cid:157)(cid:7)(cid:65)(cid:3)(cid:131)(cid:122)(cid:151)(cid:127)(cid:139)(cid:22)(cid:12) (cid:3)(cid:70)(cid:3)(cid:127)(cid:122)(cid:122)(cid:141)(cid:124)(cid:126)(cid:71)(cid:81)(cid:122)(cid:3)(cid:38)(cid:48)(cid:49) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:123)(cid:126)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:131)(cid:74) [Test Na] (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) (cid:3)(cid:70)(cid:3)(cid:24)(cid:48)(cid:31)(cid:44)(cid:49)(cid:46)(cid:45)(cid:48)(cid:50)(cid:3)(cid:50)(cid:39)(cid:43)(cid:35)(cid:66)(cid:3)(cid:144)(cid:123)(cid:122)(cid:3)(cid:49)(cid:35)(cid:33)(cid:64) (cid:3)(cid:70)(cid:3)(cid:24)(cid:35)(cid:49)(cid:50)(cid:3)(cid:33)(cid:45)(cid:44)(cid:34)(cid:39)(cid:50)(cid:39)(cid:45)(cid:44)(cid:66)(cid:3)(cid:23)(cid:35)(cid:35)(cid:3)(cid:32)(cid:35)(cid:42)(cid:45)(cid:53)(cid:3)(cid:50)(cid:31)(cid:32)(cid:42)(cid:35) 10 Thermal Shock *3 Step Condition (°C) Time (min.) 1 -20±3 30 2 (cid:141)(cid:130)(cid:127)(cid:151)(cid:125) 30 (cid:3)(cid:70)(cid:3)(cid:24)(cid:35)(cid:49)(cid:50)(cid:3)(cid:33)(cid:55)(cid:33)(cid:42)(cid:35)(cid:66)(cid:3)(cid:127)(cid:3)(cid:33)(cid:55)(cid:33)(cid:42)(cid:35)(cid:49) (cid:22)(cid:35)(cid:36)(cid:35)(cid:48)(cid:35)(cid:44)(cid:33)(cid:35)(cid:3)(cid:49)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:66)(cid:3)(cid:13)(cid:9)(cid:7)(cid:3)(cid:128)(cid:122)(cid:122)(cid:128)(cid:130)(cid:81)(cid:124)(cid:81)(cid:124)(cid:3)(cid:72)(cid:124)(cid:122)(cid:122)(cid:129)(cid:74) (cid:3)(cid:70)(cid:3)(cid:23)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:35)(cid:34)(cid:3)(cid:20)(cid:24)(cid:7)(cid:3)(cid:50)(cid:45)(cid:3)(cid:20)(cid:7)(cid:6)(cid:3)(cid:63)(cid:124) 11 High Temperature Load (cid:3)(cid:70)(cid:3)(cid:141)(cid:128)(cid:122)(cid:151)(cid:124)(cid:157)(cid:7) (cid:3)(cid:70)(cid:3)(cid:5)(cid:46)(cid:46)(cid:42)(cid:39)(cid:35)(cid:34)(cid:3)(cid:43)(cid:31)(cid:54)(cid:64)(cid:3)(cid:52)(cid:45)(cid:42)(cid:50)(cid:31)(cid:37)(cid:35) (cid:3)(cid:70)(cid:3)(cid:123)(cid:122)(cid:122)(cid:122)(cid:141)(cid:126)(cid:130)(cid:71)(cid:81)(cid:122)(cid:3)(cid:38)(cid:48)(cid:49)(cid:64) *1: The resistance value after the test is measured by 4-terminal method with less than 10mA (DC0.1V), after storage in 25±2°C for 2 hrs. *2: Above mentioned soldering is done following condition at our side. (cid:70)(cid:3)(cid:11)(cid:42)(cid:31)(cid:49)(cid:49)(cid:81)(cid:9)(cid:46)(cid:45)(cid:54)(cid:55)(cid:3)(cid:20)(cid:7)(cid:3)(cid:32)(cid:45)(cid:31)(cid:48)(cid:34)(cid:3) (cid:70)(cid:3)(cid:23)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:3)(cid:42)(cid:31)(cid:44)(cid:34)(cid:3)(cid:34)(cid:39)(cid:43)(cid:35)(cid:44)(cid:49)(cid:39)(cid:45)(cid:44) (cid:70)(cid:3)(cid:23)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:3)(cid:49)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:3)(cid:46)(cid:31)(cid:49)(cid:50)(cid:35)(cid:3) (cid:70)(cid:3)(cid:23)(cid:50)(cid:31)(cid:44)(cid:34)(cid:31)(cid:48)(cid:34)(cid:3)(cid:49)(cid:45)(cid:42)(cid:34)(cid:35)(cid:48)(cid:3)(cid:46)(cid:48)(cid:45)(cid:113)(cid:42)(cid:35) Above conditions are mentioned in Notice. (cid:63)(cid:125)(cid:66)(cid:3)(cid:27)(cid:35)(cid:3)(cid:33)(cid:31)(cid:44)(cid:44)(cid:45)(cid:50)(cid:3)(cid:37)(cid:51)(cid:31)(cid:48)(cid:31)(cid:44)(cid:50)(cid:35)(cid:35)(cid:3)(cid:50)(cid:38)(cid:35)(cid:3)(cid:48)(cid:35)(cid:49)(cid:39)(cid:49)(cid:50)(cid:31)(cid:44)(cid:33)(cid:35)(cid:3)(cid:33)(cid:38)(cid:31)(cid:44)(cid:37)(cid:35)(cid:3)(cid:39)(cid:44)(cid:3)(cid:24)(cid:38)(cid:35)(cid:48)(cid:43)(cid:31)(cid:42)(cid:3)(cid:23)(cid:38)(cid:45)(cid:33)(cid:41)(cid:3)(cid:39)(cid:44)(cid:3)(cid:33)(cid:31)(cid:49)(cid:35)(cid:3)(cid:45)(cid:36)(cid:3)(cid:34)(cid:35)(cid:36)(cid:35)(cid:33)(cid:50)(cid:39)(cid:52)(cid:35)(cid:3)(cid:43)(cid:45)(cid:51)(cid:44)(cid:50)(cid:39)(cid:44)(cid:37)(cid:64) (Note) (cid:18)(cid:45)(cid:64)(cid:123)(cid:123)(cid:3)(cid:12)(cid:39)(cid:37)(cid:38)(cid:3)(cid:24)(cid:35)(cid:43)(cid:46)(cid:35)(cid:48)(cid:31)(cid:50)(cid:51)(cid:48)(cid:35)(cid:3)(cid:16)(cid:45)(cid:31)(cid:34)(cid:3)(cid:39)(cid:49)(cid:3)(cid:32)(cid:31)(cid:49)(cid:35)(cid:34)(cid:3)(cid:45)(cid:44)(cid:3)(cid:11)(cid:42)(cid:31)(cid:49)(cid:49)(cid:81)(cid:9)(cid:46)(cid:45)(cid:54)(cid:55)(cid:3)(cid:20)(cid:7)(cid:3)(cid:32)(cid:45)(cid:31)(cid:48)(cid:34)(cid:3)(cid:53)(cid:38)(cid:39)(cid:33)(cid:38)(cid:3)(cid:50)(cid:38)(cid:35)(cid:48)(cid:43)(cid:31)(cid:42)(cid:3)(cid:34)(cid:39)(cid:49)(cid:49)(cid:39)(cid:46)(cid:31)(cid:50)(cid:39)(cid:45)(cid:44)(cid:3)(cid:33)(cid:45)(cid:35)(cid:116)(cid:33)(cid:39)(cid:35)(cid:44)(cid:50)(cid:3)(cid:45)(cid:36)(cid:3)(cid:31)(cid:3)(cid:43)(cid:45)(cid:51)(cid:44)(cid:50)(cid:39)(cid:44)(cid:37)(cid:3)(cid:49)(cid:50)(cid:31)(cid:50)(cid:35)(cid:3)(cid:39)(cid:49)(cid:3)(cid:124)(cid:64)(cid:124)(cid:43)(cid:27)(cid:71)(cid:157)(cid:7)(cid:64) (cid:13)(cid:44)(cid:3)(cid:45)(cid:50)(cid:38)(cid:35)(cid:48)(cid:3)(cid:33)(cid:45)(cid:44)(cid:34)(cid:39)(cid:50)(cid:39)(cid:45)(cid:44)(cid:3)(cid:45)(cid:36)(cid:3)(cid:124)(cid:64)(cid:124)(cid:43)(cid:27)(cid:71)(cid:157)(cid:7)(cid:65)(cid:3)(cid:12)(cid:39)(cid:37)(cid:38)(cid:3)(cid:24)(cid:35)(cid:43)(cid:46)(cid:35)(cid:48)(cid:31)(cid:50)(cid:51)(cid:48)(cid:35)(cid:3)(cid:16)(cid:45)(cid:31)(cid:34)(cid:3)(cid:33)(cid:38)(cid:31)(cid:48)(cid:31)(cid:33)(cid:50)(cid:35)(cid:48)(cid:39)(cid:49)(cid:50)(cid:39)(cid:33)(cid:49)(cid:3)(cid:43)(cid:31)(cid:55)(cid:3)(cid:33)(cid:38)(cid:31)(cid:44)(cid:37)(cid:35)(cid:64) 24

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Chip Type Specifications and Test Methods 1 PRG18/21BB Series No. Item Rating Value Metheod of Examination 1 Operating Temp. -10 to 60°C Temperature range with maximum voltage applied to PTC. After applying maximum operating voltage for 3 mins. and 2 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) We apply 120% of the maximum operating voltage to PTC by raising gradually for 180±5 secs. at 25°C. (A protective resistor 3 Withstanding Voltage Without damage is to be connected in series, and the inrush current through PTC must be limited below maximum rated value.) Reference standard: IEC 60068-2-21 (2006) · Soldered PTC to PCB (**) 4 Adhesive Strength There is no sign of exfoliation on electrode. · Force: 5.0N · Test time: 10±1 sec. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 5 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 6 Solderability Wetting of soldering area: >= 75% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [Reflow method] · Solder: Sn-3.0Ag-0.5Cu · Preheat: +150 to +180°C, 120+/-5s · Appearance: No defects or abnormalities 7 Resistance to Soldering Heat · Peak temp: 260+/-5°C · Resistance (R25) change: Less than ±20% (*) · Soldering time: >= 220°C, 60 to 90s · Reflow cycle: 1 time · Test board: Grass-Epoxy test board (FR-4) with our standard land size Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 8 High Temperature Storage · +60±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 9 Low Temperature Storage · -10±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 10 Damp Heat, Steady State · +40±2°C, 90±5%RH · 500+24/-0 hrs Reference standard: IEC 60068-2-14 (2009) [ Test Na ] · Appearance: No defects or abnormalities · Soldered PTC to PCB (**) · Resistance (R25) change: Less than ±20% (*) · Transport time: <10 sec. · Test condition: See below table 11 Thermal Shock Step Condition Time 1 -20±3°C 30min. 2 +85±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) · +60±2°C · Applied voltage: See below table 12 High Temperature Load Step Voltage Time 1 Max. voltage 1.5hrs. 2 OFF 0.5hrs. · 500+24/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard solder paste · Standard land dimension · Standard solder profile Above conditions are mentioned in Notice. 25

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 1 Chip Type Specifications and Test Methods PRG18/21BC Series No. Item Rating Value Metheod of Examination 1 Operating Temp. -10 to 60°C Temperature range with maximum voltage applied to PTC. After applying maximum operating voltage for 3 mins. and 2 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) We apply 120% of the maximum operating voltage to PTC by raising gradually for 180±5 secs. at 25°C. (A protective resistor 3 Withstanding Voltage Without damage is to be connected in series, and the inrush current through PTC must be limited below maximum rated value.) Reference standard: IEC 60068-2-21 (2006) · Soldered PTC to PCB (**) 4 Adhesive Strength There is no sign of exfoliation on electrode. · Force: 5.0N · Test time: 10±1 sec. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 5 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 6 Solderability Wetting of soldering area: >= 75% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [Reflow method] · Solder: Sn-3.0Ag-0.5Cu · Preheat: +150 to +180°C, 120+/-5s · Appearance: No defects or abnormalities 7 Resistance to Soldering Heat · Peak temp: 260+/-5°C · Resistance (R25) change: Less than ±20% (*) · Soldering time: >= 220°C, 60 to 90s · Reflow cycle: 1 time · Test board: Grass-Epoxy test board (FR-4) with our standard land size Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 8 High Temperature Storage · +60±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 9 Low Temperature Storage · -10±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 10 Damp Heat, Steady State · +60±2°C, 90±5%RH · 500+24/-0 hrs Reference standard: IEC 60068-2-14 (2009) [ Test Na ] · Appearance: No defects or abnormalities · Soldered PTC to PCB (**) · Resistance (R25) change: Less than ±20% (*) · Transport time: <10 sec. · Test condition: See below table 11 Thermal Shock Step Condition Time 1 -20±3°C 30min. 2 +85±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) · +60±2°C · Applied voltage: See below table 12 High Temperature Load Step Voltage Time 1 Max. voltage 1.5hrs. 2 OFF 0.5hrs. · 500+24/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard solder paste · Standard land dimension · Standard solder profile Above conditions are mentioned in Notice. 26

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 30V Series 2 D max. T max. This product is a leaded type PTC thermistor for overcurrent protection which is suitable for a current limiting resistor. max. Features H 1. Small fluctuation in the circuit due to resistance 5 1. tolerance +/-10% 0± 4. 2. Narrow current range (less than twice) between F±1.5 ød±0.05 operating and non-operating current at -10 to 60°C. 3. Quick operating time due to small size compared (in mm) with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (mm) (F) (mm) (ød) (mm) PTGL04AS100K2N51B0 30 122 154 205 240 1.5 10 ±10% 4.5 3.5 9.5 5.0 0.5 PTGL04AS100K2B51B0 30 167 212 282 330 2.0 10 ±10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS3R9K2B51B0 30 269 340 452 530 3.5 3.9 ±10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS2R7K2B51B0 30 336 425 565 663 4.5 2.7 ±10% 7.3 3.5 12.3 5.0 0.6 PTGL07AS1R8K2B51B0 30 420 532 708 829 5.0 1.8 ±10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS1R2K2B51B0 30 556 704 936 1097 6.0 1.2 ±10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS0R8K2B51B0 30 685 867 1153 1352 7.0 0.8 ±10% 11.5 3.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 30V Series is recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. Protective Threshold Current Range PTGL04AS100K2N51B0 PTGL04AS100K2B51B0 280 400 240 Trip Current Trip Current 300 200 Protective Protective A) Threshold A) Threshold m160 Current m Current nt ( Hold Current nt (200 Hold Current e e urr120 urr C C 80 100 40 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 27

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range PTGL05AS3R9K2B51B0 PTGL07AS2R7K2B51B0 600 700 Trip Current 2 Trip Current 600 500 Protective Protective 500 Threshold A)400 Threshold A) Current urrent (m300 Hold Current Current urrent (m340000 Hold Current C C 200 200 100 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL07AS1R8K2B51B0 PTGL09AS1R2K2B51B0 1000 1200 Trip Current Trip Current 800 1000 Protective Protective A) 600 Threshold A) 800 Threshold m Current m Current ent ( ent ( 600 urr 400 urr C Hold Current C Hold Current 400 200 200 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL12AS0R8K2B51B0 1600 Trip Current 1200 Protective A) Threshold m Current nt ( 800 e urr C Hold Current 400 0 -20 0 20 40 60 80 Ambient Temperature (°C) Operating Time (Typical Curve) PTGL04AS100K2N51B0 PTGL04AS100K2B51B0 100 100 Operating Time (sec.)110 -- 3126800505°°°°°CCCCCAmbient Temp. Operating Time (sec.)110 -- 2683150500°°°°°CCCCCAmbient Temp. 0.1 0.1 0.01 0.01 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) Continued on the following page. 28

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time (Typical Curve) PTGL05AS3R9K2B51B0 PTGL07AS2R7K2B51B0 100 100 2 - 30°C - 10°C - 30°C 25°CAmbient Temp. me (sec.)10 - 26815050°°°°CCCCAmbient Temp. me (sec.)10 6805°°CC Operating Ti 1 Operating Ti 1 0.1 0.1 0.01 0.01 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL07AS1R8K2B51B0 PTGL09AS1R2K2B51B0 100 100 - 30°C - 30°C - 2150°°CCAmbient Temp. - 2150°°CCAmbient Temp. me (sec.)10 6805°°CC me (sec.)10 6805°°CC Operating Ti Operating Ti 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL12AS0R8K2B51B0 100 - 30°C - 10°C 25°CAmbient Temp. 60°C 85°C me (sec.)10 Operating Ti 1 0.1 0.1 1 10 Overcurrent (A) 29

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 51/60V Series D max. T max. This product is a leaded type PTC thermistor for overcurrent protection which is suitable for 3 a current limiting resistor. max. Features H 1. Small fluctuation in the circuit due to resistance 5 1. tolerance +/-10% 0± 4. 2. Narrow current range (less than twice) between F±1.5 ød±0.05 operating and non-operating current at -10 to 60°C. 3. Quick operating time due to small size compared (in mm) with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (mm) (F) (mm) (ød) (mm) PTGL04AS100K3B51B0 51 168 213 283 332 1.0 10 ±10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS6R8K3B51B0 51 197 249 331 388 1.5 6.8 ±10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS3R3K3B51B0 51 307 389 517 606 3.0 3.3 ±10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS2R2K3B51B0 51 412 522 694 814 4.0 2.2 ±10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS1R2K3B51B0 51 592 749 996 1168 5.0 1.2 ±10% 11.5 3.5 16.5 5.0 0.6 PTGL04AS220K4N51B0 60 88 112 149 175 1.0 22 ±10% 4.5 3.5 9.5 5.0 0.5 PTGL04AS220K4B51B0 60 115 145 193 226 1.0 22 ±10% 4.5 3.5 9.5 5.0 0.6 PTGL05AS100K4B51B0 60 170 215 286 335 1.5 10 ±10% 5.5 3.5 10.5 5.0 0.6 PTGL07AS5R6K4N51B0 60 186 236 314 368 2.2 5.6 ±10% 7.3 3.5 12.3 5.0 0.5 PTGL07AS5R6K4B51B0 60 229 290 386 452 3.0 5.6 ±10% 7.3 3.5 12.3 5.0 0.6 PTGL09AS3R3K4B51B0 60 333 421 560 656 4.0 3.3 ±10% 9.3 3.5 14.3 5.0 0.6 PTGL12AS2R2K4B51B0 60 439 556 739 867 5.0 2.2 ±10% 11.5 3.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 51/60V Series are recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. 30

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Protective Threshold Current Range (51V Series) PTGL04AS100K3B51B0 PTGL05AS6R8K3B51B0 400 400 Trip Current Trip Current 300 Protective 300 Protective A) Threshold A) Threshold m Current m Current nt (200 nt ( Curre Curre200 Hold Current 3 Hold Current 100 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL07AS3R3K3B51B0 PTGL09AS2R2K3B51B0 700 1000 600 Trip Current 800 Trip Current 500 Protective nt (mA)400 ThreshColudrrent nt (mA) 600 ProtectTivhereshColudrrent e e urr300 Hold Current urr 400 C C Hold Current 200 200 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL12AS1R2K3B51B0 1400 1200 Trip Current 1000 Protective A) Threshold m 800 Current nt ( e urr 600 Hold Current C 400 200 0 -20 0 20 40 60 80 Ambient Temperature (°C) Protective Threshold Current Range (60V Series) PTGL04AS220K4N51B0 PTGL04AS220K4B51B0 200 240 Trip Current Trip Current 160 200 Protective Protective mA)120 ThreshColudrrent mA)160 ThreshColudrrent ent ( ent (120 urr 80 urr C Hold Current C Hold Current 80 40 40 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 31

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (60V Series) PTGL05AS100K4B51B0 PTGL07AS5R6K4N51B0 400 400 Trip Current Trip Current 300 Protective 300 Protective A) Threshold A) Threshold nt (m200 Current nt (m Current 3 Curre Curre200 Hold Current Hold Current 100 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL07AS5R6K4B51B0 PTGL09AS3R3K4B51B0 700 500 Trip Current Trip Current 600 400 mA) ProtectTivhereshold mA)500 ProtectTivhereshColudrrent nt (300 Current nt (400 e e urr urr300 C200 C Hold Current Hold Current 200 100 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL12AS2R2K4B51B0 1000 Trip Current 800 Protective mA) 600 ThreshColudrrent nt ( e urr 400 C Hold Current 200 0 -20 0 20 40 60 80 Ambient Temperature (°C) Operating Time 51V Series (Typical Curve) PTGL04AS100K3B51B0 PTGL05AS6R8K3B51B0 100 100 me (sec.)10 -- 2683150500°°°°°CCCCCAmbient Temp. me (sec.)10 -- 2683150500°°°°°CCCCCAmbient Temp. Operating Ti Operating Ti 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) Continued on the following page. 32

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 51V Series (Typical Curve) PTGL07AS3R3K3B51B0 PTGL09AS2R2K3B51B0 100 100 - 30°C - 30°C - 10°C - 10°C me (sec.)10 268505°°°CCCAmbient Temp. me (sec.)10 268505°°°CCCAmbient Temp. Operating Ti Operating Ti 3 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL12AS1R2K3B51B0 100 - 30°C - 10°C 25°CAmbient Temp. me (sec.)10 6805°°CC Operating Ti 1 0.1 0.1 1 10 Overcurrent (A) Operating Time 60V Series (Typical Curve) PTGL04AS220K4N51B0 PTGL04AS220K4B51B0 100 100 - 30°C - 10°C 25°CAmbient Temp. 60°C 85°C - 30°C me (sec.)10 me (sec.)10 - 26815050°°°°CCCCAmbient Temp. Operating Ti 1 Operating Ti 1 0.1 0.1 0.01 0.01 0.01 0.1 1 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL05AS100K4B51B0 PTGL07AS5R6K4N51B0 100 100 - 30°C - 30°C me (sec.)10 - 26815050°°°°CCCCAmbient Temp. me (sec.)10 - 26815050°°°°CCCCAmbient Temp. Operating Ti Operating Ti 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) Continued on the following page. 33

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 60V Series (Typical Curve) PTGL07AS5R6K4B51B0 PTGL09AS3R3K4B51B0 100 100 - 30°C - 30°C me (sec.)10 - 26815050°°°°CCCC Ambient Temp. me (sec.)10 - 26815050°°°°CCCCAmbient Temp. 3 Operating Ti Operating Ti 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL12AS2R2K4B51B0 100 - 30°C me (sec.)10 - 26815050°°°°CCCCAmbient Temp. Operating Ti 1 0.1 0.1 1 10 Overcurrent (A) 34

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection Narrow Current Band 140V Series D max. T max. This product is a leaded type PTC thermistor for overcurrent protection which is suitable for a current limiting resistor. max. Features H 1. Small fluctuation in the circuit due to resistance 4 5 1. tolerance +/-10% 0± 4. 2. Narrow current range (less than twice) between F±1.5 ød±0.05 operating and non-operating current at -10 to 60°C. 3. Quick operating time due to small size compared (in mm) with conventional products. 4. Best suited to meet the requirements for power supplies and motor protection. Error-free operations are assured by rush current. 5. Circuit is protected until current is turned off. 6. Restores the original low resistance value automatically once the overload is removed. 7. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (mm) (F) (mm) (ød) (mm) PTGL04AS560K6B51B0 140 74 94 125 147 0.5 56 ±10% 4.5 4.5 9.5 5.0 0.6 PTGL05AS270K6B51B0 140 106 134 178 209 1.0 27 ±10% 5.5 4.5 10.5 5.0 0.6 PTGL07AS150K6B51B0 140 148 187 249 292 1.5 15 ±10% 7.3 4.5 12.3 5.0 0.6 PTGL09AS120K6B51B0 140 192 244 324 380 2.0 12 ±10% 9.3 4.5 14.3 5.0 0.6 PTGL09AS7R6K6B51B0 140 227 287 382 447 2.2 7.6 ±10% 9.3 4.5 14.3 5.0 0.6 PTGL12AS4R7K6B51B0 140 310 393 523 613 3.5 4.7 ±10% 11.5 4.5 16.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 140V Series is recognized by UL. Taping type is also available. Please refer to the page of "Package" information for details. Protective Threshold Current Range PTGL04AS560K6B51B0 PTGL05AS270K6B51B0 240 160 Trip Current Trip Current 200 120 Protective 160 Protective A) Threshold A) Threshold nt (m Current nt (m120 Current Curre 80 Hold Current Curre Hold Current 80 40 40 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 35

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range PTGL07AS150K6B51B0 PTGL09AS120K6B51B0 400 300 Trip Current Trip Current Protective 300 Protective A) Threshold A) Threshold m200 Current m Current nt ( nt ( Curre Hold Current Curre200 Hold Current 100 100 4 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL09AS7R6K6B51B0 PTGL12AS4R7K6B51B0 700 500 600 Trip Current Trip Current 400 500 Protective mA) ProtectTivhereshold mA)400 ThreshColudrrent nt (300 Current nt ( e e Curr200 Curr300 Hold Current Hold Current 200 100 100 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Operating Time (Typical Curve) PTGL04AS560K6B51B0 PTGL05AS270K6B51B0 100 100 - 30°C - 30°C - 10°C - 10°C me (sec.)10 268505°°°CCCAmbient Temp. me (sec.)10 268505°°°CCC Ambient Temp. Operating Ti Operating Ti 1 1 0.1 0.1 0.01 0.1 1 0.1 1 10 Overcurrent (A) Overcurrent (A) PTGL07AS150K6B51B0 PTGL09AS120K6B51B0 100 100 - 30°C - 30°C - 10°C - 10°C me (sec.)10 286550°°°CCC Ambient Temp. me (sec.)10 268505°°°CCCAmbient Temp. Operating Ti Operating Ti 1 1 0.1 0.1 0.1 1 10 0.1 1 10 Overcurrent (A) Overcurrent (A) Continued on the following page. 36

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time (Typical Curve) PTGL09AS7R6K6B51B0 PTGL12AS4R7K6B51B0 100 100 - 30°C - 30°C - 10°C - 10°C me (sec.)10 268505°°°CCCAmbient Temp. me (sec.)10 268505°°°CCCAmbient Temp. Operating Ti Operating Ti 1 1 0.10.1 1 10 0.10.1 1 10 4 Overcurrent (A) Overcurrent (A) 37

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection 16V Series D max. T max. This low-voltage, low-resistance type "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like motor lock or short circuit, will be increased to max. H restrain overcurrent. This "POSISTOR" is most suitable for low-voltage circuits. 5 1. Features 4.0± F±1.5 ød±0.05 1. Best suited to meet the requirements for power 5 supplies and motor protection. Error-free operation (in mm) is assured by rush current. 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Height Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) (H) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (mm) (F) (mm) (ød) (mm) PTGL05AR1R0M1B51B0 16 370 470 880 1040 2.0 1.0 ±20% 6.0 3.5 9.5 5.0 0.6 PTGL06AR0R8M1B51B0 16 400 505 955 1120 3.0 0.8 ±20% 6.5 3.5 10.0 5.0 0.6 PTGL07ARR47M1B51B0 16 560 705 1310 1570 5.0 0.47 ±20% 7.5 3.5 12.0 5.0 0.6 PTGL09ARR33M1B51B0 16 680 875 1625 1900 7.0 0.33 ±20% 9.0 3.5 14.0 5.0 0.6 PTGL10ARR27M1B51B0 16 800 1025 1900 2250 8.0 0.27 ±20% 10.1 3.5 15.0 5.0 0.6 PTGL12AR0R2M1B51B0 16 1000 1300 2410 2800 9.0 0.2 ±20% 11.3 3.5 16.0 5.0 0.6 PTGL14ARR15M1B51B0 16 1200 1545 2855 3360 10 0.15 ±20% 13.5 3.5 18.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. Taping type is also available(except PTGL14ARR15M1B51B0). Please refer to the page of "Package" information for details. Protective Threshold Current Range (16V Series) PTGL05AR1R0M1B51B0 PTGL06AR0R8M1B51B0 1400 1400 1200 1200 1000 1000 Trip Current Trip Current A) A) m 800 m 800 urrent ( 600 PCruortreecnttive Threshold urrent ( 600 PCruortreecnttive Threshold C C 400 400 Hold Current Hold Current 200 200 0 0 -20 -10 0 10 20 30 40 50 60 70 80 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 38

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (16V Series) PTGL07ARR47M1B51B0 PTGL09ARR33M1B51B0 2000 2600 2400 1800 2200 1600 2000 1400 Trip Current 1800 Trip Current A)1200 A)1600 m m Current (1080000 PCruortreecnttive Threshold Current (111420000000 PCruortreecnttive Threshold 600 800 Hold Current 600 Hold Current 400 400 200 200 0 0 -20 -10 0 10 20 30 40 50 60 70 80 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL10ARR27M1B51B0 PTGL12AR0R2M1B51B0 3000 4000 5 2800 2600 3500 2400 2200 Trip Current 3000 Trip Current 2000 A)1800 A)2500 m m ent (11640000 PCruortreecnttive Threshold ent (2000 Protective Threshold Curr1200 Curr1500 Current 1000 800 Hold Current 1000 Hold Current 600 400 500 200 0 0 -20 -10 0 10 20 30 40 50 60 70 80 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL14ARR15M1B51B0 4000 3500 3000 Trip Current A)2500 m nt (2000 PCruortreecnttive Threshold e Curr1500 1000 Hold Current 500 0 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (°C) Operating Time 16V Series (Typical Curve) PTGL05AR1R0M1B51B0 PTGL06AR0R8M1B51B0 100.0 100.0 -10°C -10°C +25°C Ambient +25°C Ambient me (sec.) 10.0 +60°C Temp. me (sec.) 10.0 +60°C Temp. Operating Ti 1.0 Operating Ti 1.0 0.1 0.1 0.1 1 10 100 0.1 1 10 100 Overcurrent (A) Overcurrent (A) Continued on the following page. 39

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 16V Series (Typical Curve) PTGL07ARR47M1B51B0 PTGL09ARR33M1B51B0 100.0 100.0 -10°C -10°C +25°C Ambient +25°C Ambient me (sec.) 10.0 +60°C Temp. me (sec.) 10.0 +60°C Temp. Operating Ti 1.0 Operating Ti 1.0 0.1 0.1 0.1 1 10 100 0.1 1 10 100 Overcurrent (A) Overcurrent (A) PTGL10ARR27M1B51B0 PTGL12AR0R2M1B51B0 5 100.0 100.0 me (sec.) 10.0 -++126050°°°CCC A m Tebmienpt. me (sec.) 10.0 -++126050°°°CCC A m Tebmienpt. Operating Ti 1.0 Operating Ti 1.0 0.1 0.1 0.1 1 10 100 0.1 1 10 100 Overcurrent (A) Overcurrent (A) PTGL14ARR15M1B51B0 100.0 -10°C +25°C Ambient +60°C Temp. me (sec.) 10.0 Operating Ti 1.0 0.1 0.1 1 10 100 Overcurrent (A) 40

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection 24/30/32V Series D max. T max. The safety resistor "POSISTOR" is most suited to meet the requirements of the safety standard short-circuit tests such as IEC, VDE, BS, UL, CSA, etc., worldwide. max. Features 0 6. 1. Best suited to meet the requirements of the short- circuit test. Quick response compared with current ød±0.05 fuse and resistor and error-free operation are 5 1. assured. 0± F±1.5 4. 2. Small size save board space. Capable of being (in mm) mounted anywhere because replacement is not required. 3. Actuates by excessive current during the short- circuit test to restrain abnormal heat generation 6 in other circuit components and printed boards. This state will be maintained until the abnormal state is removed or power is turned off to reset the "POSISTOR" to the original state. Surface temperature of "POSISTOR" is kept low, below a certain value, during the actuation. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration and shock because it is a solid element. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (F) (mm) (ød) (mm) PTGL09BD4R7N2B51B0 24 120 216 398 500 2.0 4.7 ±30% 9.5 4.0 5.0 0.6 PTGL09BD3R3N2B51B0 24 140 248 461 580 2.0 3.3 ±30% 9.5 4.0 5.0 0.6 PTGL07AR4R6H2B51B0 30 250 340 610 700 2.0 4.6 ±25% 7.4 4.0 5.0 0.6 PTGL09AR1R8H2B51B0 30 410 510 970 1120 3.0 1.8 ±25% 9.5 4.0 5.0 0.6 PTGL13AR0R8H2B71B0 30 680 870 1600 1900 5.5 0.8 ±25% 13.5 4.0 7.5 0.6 PTGL07BD330N3B51B0 32 40 60 135 170 1.5 33 ±30% 7.4 4.0 5.0 0.6 PTGL07BD220N3B51B0 32 45 75 160 200 1.5 22 ±30% 7.4 4.0 5.0 0.6 PTGL07BD150N3B51B0 32 60 100 195 240 1.5 15 ±30% 7.4 4.0 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. 24/30/32V Series are recognized by UL (except PTGL13AR0R8H2B71B0). Only PTGL_51B0 series are available in taping type. Please refer to the page of "Package" information for details. Protective Threshold Current Range (24V Series) PTGL09BD4R7N2B51B0 PTGL09BD3R3N2B51B0 600 600 A) Trip Current A) Trip Current m m nt (400 nt (400 e e urr urr Protective Threshold Current C Protective Threshold Current C 200 200 Hold Current Hold Current 0 0 –20 0 20 40 60 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) 41

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Protective Threshold Current Range (30V Series) PTGL07AR4R6H2B51B0 PTGL09AR1R8H2B51B0 800 1500 Trip Current 600 Trip Current 1000 mA) Protective Threshold Current mA) nt (400 nt ( Protective Threshold Current e e urr urr C Hold Current C 500 200 Hold Current 0 0 –20 0 20 40 60 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) PTGL13AR0R8H2B71B0 2000 Trip Current 1500 A) Protective Threshold Current m 6 nt (1000 e urr C Hold Current 500 0 –20 0 20 40 60 Ambient Temperature (°C) Protective Threshold Current Range (32V Series) PTGL07BD330N3B51B0 PTGL07BD220N3B51B0 300 300 A) A) m m nt (200 nt (200 e e Trip Current urr Trip Current urr C C Protective Threshold Current 100 Protective Threshold Current 100 Hold Current Hold Current 0 0 –20 0 20 40 60 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) PTGL07BD150N3B51B0 300 A) m Trip Current nt (200 e urr C Protective Threshold Current 100 Hold Current 0 –20 0 20 40 60 Ambient Temperature (°C) 42

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Operating Time 24V Series (Typical Curve) PTGL09BD4R7N2B51B0 PTGL09BD3R3N2B51B0 25 30 -10°C -10°C me (sec.)20 ++2650°°CC A m Tebmienpt. me (sec.)2250 ++2650°°CC A m Tebmienpt. Operating Ti1150 Operating Ti1150 5 5 0 0 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 Overcurrent (A) Overcurrent (A) Operating Time 30V Series (Typical Curve) PTGL07AR4R6H2B51B0 PTGL09AR1R8H2B51B0 70 70 60 60 -10°C -10°C 6 me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 Operating Ti3200 10 10 0 0 0 0.2 0.4 0.6 0.8 1.0 0 1.0 2.0 3.0 Overcurrent (A) Overcurrent (A) PTGL13AR0R8H2B71B0 70 60 -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 10 0 0 1.0 2.0 3.0 4.0 5.0 Overcurrent (A) Operating Time 32V Series (Typical Curve) PTGL07BD330N3B51B0 PTGL07BD220N3B51B0 25 25 me (sec.)20 me (sec.)20 Operating Ti1150 -++126050°°°CCC A m Tebmienpt. Operating Ti1150 -++126050°°°CCC A m Tebmienpt. 5 5 0 0 0 0.5 1.0 1.5 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) Continued on the following page. 43

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 32V Series (Typical Curve) PTGL07BD150N3B51B0 25 me (sec.)20 Operating Ti1150 -++126050°°°CCC A m Tebmienpt. 5 0 0 0.5 1.0 1.5 Overcurrent (A) Application Circuit (1) Short - Circuit Test of Transistor (2) Short - Circuit Test of Diode 6 PTH PTH R3 R1 C Short + B R1 E – AC R4 Short AC 100V R2 100V (3) Short - Circuit Test of IC (4) Short - Circuit Test of Electrolytic Capacitor PTH +V0 PTH + IC Short Short – Electrolytic AC Capacitor 100V (5) Lock Test of Motor (6) Transistor Protection Circuit PTH PTH RB RL DC24V M M(Lootcokr) RA C RE Continued on the following page. 44

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Application Circuit (7) Transformer Protection Circuit PTH Power Supply 6 45

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection 56/80V Series D max. T max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be max. 0 used for overcurrent protection against current 6. fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. 1.5 0± 4. F±1.5 Features ød±0.05 1. Best suited to meet the requirements for power (in mm) supplies and motor protection. Error-free operations are assured by rush current. Applications 2. Circuit is protected until current is turned off. 3. Restores the original low resistance value 1. DC cooling fan motors in office equipment, e.g., automatically once the overload is removed. computers, facsimiles, floppy disk drives and power 4. Non-contact design leads to long life and no noise. units. Durable and strong against mechanical vibration 2. DC drive motors in VTRs and cassette tape recorders. and shock because it is a solid element. Power transformers (at secondary winding) 7 Max. Hold CurrentHold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (F) (mm) (ød) (mm) PTGL07AR220M3P51B0 56 90 115 205 240 1.0 22 ±20% 7.4 4.0 5.0 0.6 PTGL07AR8R2M3P51B0 56 130 165 300 350 1.0 8.2 ±20% 7.4 4.0 5.0 0.6 PTGL09AR150M3B51B0 56 150 190 340 400 1.2 15 ±20% 9.5 4.0 5.0 0.6 PTGL10AR3R9M3P51B0 56 210 260 470 550 2.0 3.9 ±20% 10.5 4.0 5.0 0.6 PTGL09AR4R7M3B51B0 56 270 350 600 700 2.0 4.7 ±20% 9.5 4.0 5.0 0.6 PTGL10AR3R9M3B51B0 56 300 390 680 800 2.0 3.9 ±20% 10.5 4.0 5.0 0.6 PTGL14AR3R3M3B71B0 56 380 490 830 980 2.5 3.3 ±20% 14.5 4.0 7.5 0.6 PTGL05AR550H4P51B0 80 50 62 115 135 0.7 55 ±25% 5.5 4.5 5.0 0.6 PTGL07AR250H4B51B0 80 110 140 260 300 1.0 25 ±25% 7.4 4.5 5.0 0.6 PTGL09AR9R4H4B51B0 80 190 240 450 530 3.0 9.4 ±25% 9.5 4.5 5.0 0.6 Maximum Current shows typical capacities of the transformer which can be used. Please contact us for UL recognized products. Only PTGL_51B0 type is available in taping type. Please refer to the page of "Package" information for details. Protective Threshold Current Range (56V Series) PTGL07AR220M3P51B0 PTGL07AR8R2M3P51B0 300 500 Trip Current 400 Trip Current 200 A) A)300 m m nt ( Protective Threshold Current nt ( urre urre200 Protective Threshold Current C C 100 Hold Current 100 Hold Current 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 46

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (56V Series) PTGL09AR150M3B51B0 PTGL10AR3R9M3P51B0 500 800 400 Trip Current Trip Current 600 A)300 A) m m nt ( Protective Threshold Current nt (400 urre200 urre Protective Threshold Current C C 200 100 Hold Current Hold Current 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL09AR4R7M3B51B0 PTGL10AR3R9M3B51B0 800 1000 Trip Current 800 Trip Current 600 A) A) 600 m Protective Threshold Current m nt (400 nt ( Protective Threshold Current e e urr urr 400 C C 200 Hold Current 200 Hold Current 7 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL14AR3R3M3B71B0 1500 Trip Current 1000 A) m nt ( e urr Protective Threshold Current C 500 Hold Current 0 -20 0 20 40 60 80 Ambient Temperature (°C) Protective Threshold Current Range (80V Series) PTGL05AR550H4P51B0 PTGL07AR250H4B51B0 150 400 Trip Current Trip Current 300 100 A) A) m Protective Threshold Current m nt ( nt (200 urre urre Protective Threshold Current C C 50 Hold Current 100 Hold Current 0 0 –20 0 20 40 60 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 47

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (80V Series) PTGL09AR9R4H4B51B0 800 600 Trip Current A) m nt (400 e urr Protective Threshold Current C 200 Hold Current 0 –20 0 20 40 60 Ambient Temperature (°C) Operating Time 56V Series (Typical Curve) PTGL07AR220M3P51B0 PTGL07AR8R2M3P51B0 50 70 -10°C -10°C 60 +25°C Ambient 40 +25°C Ambient +60°C Temp. +60°C Temp. 7 Operating Time (sec.)543000 Operating Time (s)3200 20 10 10 0 0 0 0.2 0.4 0.6 0.8 0 0.5 1.0 1.5 2.0 Overcurrent (A) Overcurrent (A) PTGL09AR150M3B51B0 PTGL10AR3R9M3P51B0 25 70 -10°C 60 +25°C Ambient 20 +60°C Temp. -10°C Operating Time (sec.)543000 Operating Time (sec.)1150 ++2650°°CC A m Tebmienpt. 20 5 10 0 0 0 0.2 0.4 0.6 0.8 0 1 2 3 4 Overcurrent (A) Overcurrent (A) PTGL09AR4R7M3B51B0 PTGL10AR3R9M3B51B0 25 25 20 20 -10°C -10°C me (sec.)15 ++2650°°CC A m Tebmienpt. me (sec.)15 ++2650°°CC A m Tebmienpt. Operating Ti10 Operating Ti10 5 5 0 0 0 1 2 3 4 0 1 2 3 4 Overcurrent (A) Overcurrent (A) Continued on the following page. 48

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 56V Series (Typical Curve) PTGL14AR3R3M3B71B0 40 30 -10°C me (sec.) ++2650°°CC A m Tebmienpt. Operating Ti20 10 0 0 1 2 3 4 Overcurrent (A) Operating Time 80V Series (Typical Curve) PTGL05AR550H4P51B0 PTGL07AR250H4B51B0 70 70 60 60 -10°C -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 Operating Ti3200 7 10 10 0 0 0 0.2 0.4 0.6 0 0.2 0.4 0.6 0.8 1.0 Overcurrent (A) Overcurrent (A) PTGL09AR9R4H4B51B0 70 60 -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 10 0 0 1.0 2.0 3.0 Overcurrent (A) Application Circuit (1) DC Motor Protection Circuit (2) Transistor Protection Circuit PTH PTH RB RL M Power Supply Motor RA C RE Continued on the following page. 49

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Application Circuit (3) Transformer Protection Circuit PTH Power Supply 7 50

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection 125/140V Series D max. T max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be max. used for overcurrent protection against current fuse 0 6. or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. Features 125V Series F±1.5 ød±0.05 1.5 0± 4. 1. Best suited to meet the requirements for power (in mm) supplies and motor protection. Error-free operations are assured by rush current. 2. Circuit is protected until current is turned off. D max. T max. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration max. 0 and shock because it is a solid element. 6. Applications ød±0.05 Circuit Protection : 140V Series 1.5 0± 1. Transformers F±1.5 4. 8 2. Transistors (in mm) 3. Fluorescent Lamps Max. Hold CurrentHold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (F) (mm) (ød) (mm) PTGL05AR181M7P52B0 125 30 38 64 75 0.3 180 ±20% 6.0 5.0 5.0 0.6 PTGL14AR100M6B72B0 125 220 280 475 550 1.2 10 ±20% 15.0 5.5 7.5 0.6 PTGL07AR330M6A51B0 140 100 130 200 230 0.5 33 ±20% 7.4 6.0 5.0 0.5 PTGL13AR6R8M6C01B0 140 290 370 575 670 1.0 6.8 ±20% 14.0 6.0 10.0 0.65 Maximum Current shows typical capacities of the transformer which can be used. Please contact us for UL recognized products. Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details. Protective Threshold Current Range (125V Series) PTGL05AR181M7P52B0 PTGL14AR100M6B72B0 100 800 80 Trip Current Trip Current 600 A) 60 A) m m nt ( Protective Threshold Current nt (400 urre 40 urre Protective Threshold Current C C 200 20 Hold Current Hold Current 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) 51

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Protective Threshold Current Range (140V Series) PTGL07AR330M6A51B0 PTGL13AR6R8M6C01B0 300 800 Trip Current Trip Current 600 200 A) A) m m Protective Threshold Current nt ( Protective Threshold Current nt (400 e e urr urr C C Hold Current 100 Hold Current 200 0 0 –20 0 20 40 60 80 –20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Operating Time 125V Series (Typical Curve) PTGL05AR181M7P52B0 PTGL14AR100M6B72B0 70 70 60 60 -10°C -10°C Operating Time (sec.)543000 ++2650°°CC A m Tebmienpt. Operating Time (sec.)543000 ++2650°°CC A m Tebmienpt. 20 20 10 10 0 0 0 0.1 0.2 0.3 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) 8 Operating Time 140V Series (Typical Curve) PTGL07AR330M6A51B0 PTGL13AR6R8M6C01B0 70 70 60 60 -10°C -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 Operating Ti3200 10 10 0 0 0 0.25 0.50 0.75 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) 52

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Application Circuit (1) Transformer Protection Circuit 1) (2) Transformer Protection Circuit 2) PTH PTH D Power Supply C Power Supply (3) Transistor Protection Circuit (4) Fluorescent Lamp Protection Circuit PTH RB RL Fluorescent Lamp S S CH C Power R Source C C RA C RE PTH 8 53

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overcurrent Protection 250/265V Series D max. T max. "POSISTOR" is a circuit protector whose resistance value in normal operation is very low and in abnormal situations like overcurrent or overheating, will be increased to restrain overcurrent. "POSISTOR" can be used for overcurrent protection against current fuse or temperature fuse, due to its ability to return to its initial condition when overcurrent is removed. Features 250V Series F+-00..38 1. Best suited to meet the requirements for power ød±0.05 (in mm) supplies and motor protection. Error-free operations are assured by rush current. 2. Circuit is protected until current is turned off. D max. T max. 3. Restores the original low resistance value automatically once the overload is removed. 4. Non-contact design leads to long life and no noise. Durable and strong against mechanical vibration max. 0 and shock because it is a solid element. 6. ød±0.05 5 265V Series 1. (PTGL_1B0) F±1.5 4.0± (in mm) D max. T max. 9 max. 0 6. 265V Series F±1.5 ød±0.05 1.5 (PTGL_2B0) 0± 4. (in mm) Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (F) (mm) (ød) (mm) PTGL07BB220N0B52A0 250 90 130 250 300 0.5 22 ±30% 8.0 6.0 5.0 0.6 PTGL10BB120N0P52A0 250 90 130 250 300 0.6 12 ±30% 11.0 6.0 5.0 0.6 PTGL09AR390N0B52A0 250 100 115 245 280 0.6 39 ±30% 10.0 6.0 5.0 0.6 PTGL05AR151H8P52B0 265 28 35 65 78 0.2 150 ±25% 6.0 6.0 5.0 0.6 PTGL05AR181M9N51B0 265 29 37 60 70 0.3 180 ±20% 6.5 6.5 5.0 0.5 PTGL05AR121M9N51B0 265 35 47 75 85 0.3 120 ±20% 6.5 6.5 5.0 0.5 PTGL07AR820M9A51B0 265 60 75 125 150 0.5 82 ±20% 8.2 6.5 5.0 0.5 PTGL07AR700H8B52B0 265 66 85 160 185 0.4 70 ±25% 8.0 6.0 5.0 0.6 PTGL07AR560M9A51B0 265 80 95 165 190 0.8 56 ±20% 8.2 6.5 5.0 0.5 PTGL09AR390M9C61B0 265 100 130 210 240 1.2 39 ±20% 10.0 6.5 6.5 0.65 PTGL09AR250H8B52B0 265 118 150 290 330 1.0 25 ±25% 10.0 6.0 5.0 0.6 PTGL12AR270M9C01B0 265 150 200 310 360 1.5 27 ±20% 14.0 6.5 10.0 0.65 54 Continued on the following page.

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Max. Hold Current Hold Current Trip Current Trip Current Max. Resistance Body Thickness Lead Lead Part Number Voltage (at +60°C) (at +25°C) (at +25°C) (at -10°C) Current (at +25°C) Diameter (T) Space Diameter (V) (mA) (mA) (mA) (mA) (A) (Ω) (D) (mm) (mm) (F) (mm) (ød) (mm) PTGL12AR150H8B72B0 265 165 210 400 460 1.5 15 ±25% 12.5 6.0 7.5 0.6 PTGL14AR180M9C01B0 265 180 230 380 440 1.8 18 ±20% 15.7 6.5 10.0 0.65 PTGL13AR100H8B72B0 265 200 260 480 560 2.2 10 ±25% 14.0 6.0 7.5 0.6 PTGL18AR6R0H8B72B0 265 300 380 715 830 4.1 6.0 ±25% 18.5 6.0 7.5 0.6 Maximum Current shows typical capacities of the transformer which can be used. 250/265V Series are recognized by UL. Only PTGL_52B0 type is available in taping type. Please refer to the page of "Package" information for details. Protective Threshold Current Range (250V Series) PTGL07BB220N0B52A0 PTGL10BB120N0P52A0 400 400 350 Trip Current Trip Current 300 300 A)250 A) m m ent (200 Protective Threshold Current ent (200 Protective Threshold Current Curr150 Curr 100 100 Hold Current Hold Current 50 0 0 -20 0 20 40 60 80 -20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL09AR390N0B52A0 400 Trip Current 300 A) m nt (200 urre Protective Threshold Current 9 C 100 Hold Current 0 -20 0 20 40 60 80 Ambient Temperature (°C) Protective Threshold Current Range (265V Series) PTGL05AR151H8P52B0 PTGL05AR181M9N51B0 80 Trip Current 120 60 100 A) Protective Threshold Current A) m m 80 nt ( 40 nt ( Trip Current e e urr urr 60 C Hold Current C Protective Threshold Current 40 20 20 Hold Current 0 0 –20 0 20 40 60 –20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 55

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (265V Series) PTGL05AR121M9N51B0 PTGL07AR820M9A51B0 120 250 100 200 A) Trip Current A) nt (m 80 nt (m150 Trip Current urre 60 Protective Threshold Current urre C C 100 Protective Threshold Current 40 Hold Current 50 20 Hold Current 0 0 –20 0 20 40 60 80 –20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL07AR700H8B52B0 PTGL07AR560M9A51B0 200 Trip Current 250 150 200 mA) Protective Threshold Current mA) Trip Current nt (100 nt (150 urre urre Protective Threshold Current C C Hold Current 100 50 Hold Current 50 0 0 –20 0 20 40 60 –20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) PTGL09AR390M9C61B0 PTGL09AR250H8B52B0 400 Trip Current 9 300 mA)300 mA) Protective Threshold Current nt ( Trip Current nt (200 e e urr200 urr C C Protective Threshold Current 100 100 Hold Current Hold Current 0 0 –20 0 20 40 60 80 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) PTGL12AR270M9C01B0 PTGL12AR150H8B72B0 400 600 Trip Current mA)300 mA) Trip Current nt ( Protective Threshold Current nt (400 e e urr200 urr C C Protective Threshold Current Hold Current 200 100 Hold Current 0 0 –20 0 20 40 60 80 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 56

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Protective Threshold Current Range (265V Series) PTGL14AR180M9C01B0 PTGL13AR100H8B72B0 800 600 600 Trip Current A) A) m Trip Current m nt (400 nt (400 Curre Protective Threshold Current Curre Protective Threshold Current 200 200 Hold Current Hold Current 0 0 –20 0 20 40 60 80 –20 0 20 40 60 Ambient Temperature (°C) Ambient Temperature (°C) PTGL18AR6R0H8B72B0 1500 1000 mA) Trip Current nt ( e Curr Protective Threshold Current 500 Hold Current 0 –20 0 20 40 60 Ambient Temperature (°C) Operating Time 250V Series (Typical Curve) PTGL07BB220N0B52A0 PTGL10BB120N0P52A0 40 9 70 30 -10°C 60 -10°C me (sec.) ++2650°°CC A m Tebmienpt. me (sec.)50 ++2650°°CC A m Tebmienpt. Operating Ti20 Operating Ti4300 10 20 10 0 0.5 1.0 1.5 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) PTGL09AR390N0B52A0 30 -10°C Operating Time (sec.)20 ++2650°°CC A m Tebmienpt. 10 0 0 0.5 1.0 1.5 2.0 Overcurrent (A) 57

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Operating Time 265V Series (Typical Curve) PTGL05AR151H8P52B0 PTGL05AR181M9N51B0 70 60 25 -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)20 Operating Ti3200 Operating Ti1150 -++126050°°°CCC A m Tebmienpt. 10 5 0 0 0 0.04 0.08 0.12 0.16 0.20 0 0.2 0.4 0.6 0.8 Overcurrent (A) Overcurrent (A) PTGL05AR121M9N51B0 PTGL07AR820M9A51B0 25 25 -10°C me (sec.)20 me (sec.)20 ++2650°°CC A m Tebmienpt. Operating Ti1150 -++126050°°°CCC A m Tebmienpt. Operating Ti1150 5 5 0 0 0 0.2 0.4 0.6 0.8 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) PTGL07AR700H8B52B0 PTGL07AR560M9A51B0 70 60 25 9 -10°C -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)20 ++2650°°CC A m Tebmienpt. Operating Ti3200 Operating Ti1150 10 5 0 0 0 0.2 0.4 0.6 0.8 0 0.5 1.0 1.5 Overcurrent (A) Overcurrent (A) PTGL09AR390M9C61B0 PTGL09AR250H8B52B0 70 25 60 -10°C me (sec.)20 me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti1150 -++126050°°°CCC A m Tebmienpt. Operating Ti3200 5 10 0 0 0 1.0 2.0 3.0 0 0.2 0.4 0.6 0.8 1.0 Overcurrent (A) Overcurrent (A) Continued on the following page. 58

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Operating Time 265V Series (Typical Curve) PTGL12AR270M9C01B0 PTGL12AR150H8B72B0 70 25 60 -10°C -10°C me (sec.)20 ++2650°°CC A m Tebmienpt. me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti1150 Operating Ti3200 5 10 0 0 0 1.0 2.0 3.0 0 0.4 0.8 1.2 Overcurrent (A) Overcurrent (A) PTGL14AR180M9C01B0 PTGL13AR100H8B72B0 70 60 25 -10°C -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. me (sec.)20 ++2650°°CC A m Tebmienpt. Operating Ti3200 Operating Ti1150 10 5 0 0 0 0.4 0.8 1.2 1.6 0 1.0 2.0 3.0 Overcurrent (A) Overcurrent (A) PTGL18AR6R0H8B72B0 70 60 9 -10°C me (sec.)5400 ++2650°°CC A m Tebmienpt. Operating Ti3200 10 0 0 1.0 2.0 3.0 4.0 Overcurrent (A) Application Circuit (1) Transistor Protection Circuit (2) Transformer Protection Circuit 1) PTH RB RL PTH D C RA Power Supply C RE Continued on the following page. 59

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Application Circuit (3) Transformer Protection Circuit 2) (4) Fluorescent Lamp Protection Circuit PTH S S Fluorescent Lamp CH Power C Supply Power R Source C C PTH (5) Telecommunication Circuit PTH Varistor Arrester Telephone or PBX Varistor PTH 9 60

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 PTGL Series Narrow Current Band Specifications and Test Methods No. Item Rating Value Method of Examination The temperature range with maximum voltage applied to the 1 Operating Temperature -30 to +85°C POSISTORr. 2 Storage Temperature -40 to +125°C The temperature range with zero voltage. Resistance value is measured by applying voltage under 1.0Vdc (by a direct current of less than 10mA) at 25°C. But it must be 3 Resistance Value (at 25°C) Satisfies ratings measured after maximum voltage is applied for 180 seconds and then is left for 2 hours at 25°C. We apply AC voltage 120% that of the maximum voltage to POSISTORr by raising voltage gradually for 180±5 seconds at 4 Withstanding Voltage No problem 25°C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below maximum rated value.) Maximum current is measured in this examination. Voltage is Satisfies ratings applied to POSISTORr for 3 minutes step by step on still air 5 Protective Threshold Current (Trip Current, Hold Current) based on "Protective Threshold Current Test Conditions" shown in next page. Stable current is measured at each step. The load is gradually applied to each terminal of POSISTORr until the force of the following table in the axial direction with fixing POSISTORr's body itself and this load is kept for 10 Tensile Strength of Lead seconds. 6 No damage Wire Terminal Lead Diameter Force ø0.60mm max. 4.90N ø0.65mm min. 9.80N POSISTORr is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90° and returned. Bending Strength of Lead Then it is slowly bent in the opposite direction and returned to 7 Wire Terminal Lead wire does not come off original state. Lead Diameter Force ø0.60mm max. 2.45N ø0.65mm min. 4.90N The Lead wire of POSISTORr is soaked in an Isopropyl Alcohol Solder is applied around the lead wire covering 3/4 (JIS K 8839) solution (about 25wt%) of colophony (JIS K 5902) 8 Solderability or more of the circumference without gap in the for 5-10 sec. Each lead wire is soaked in molten solder (JIS Z axial direction. 3282 H60A) at 235±5°C from the bottom to a point of 2.0-2.5mm for 2±0.5 seconds. The lead wire of POSISTORr is soaked in molten solder (JIS Z 3282 H60A) at 350±10°C from the bottom to a point of 9 Terminal Durability of ΔR/R25 <= ±15% 2.0-2.5mm for 3.5±0.5 seconds. Soldering After the device is left at room temperature (25°C) for 24±4 hours, the resistance is then measured. POSISTORr is set in an environmental chamber at 60±2°C and 10 Humidity Test ΔR/R25 <= ±20% 90-95% humidity for 500±4 hours. After the device is left at room temperature (25°C) for one hour, the resistance measurement is then performed. POSISTORr is set in an environmental chamber at 85±3°C with maximum voltage applied for 500±4 hours. After the 11 Load Test at High ΔR/R25 <= ±20% device is left at room temperature (25°C) for one hour, the Temperature resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below maximum rated value.) POSISTORr is set at room temperature (25±2°C) with maximum voltage applied for 1 minute and then is left without voltage applied for 5 minutes. This cycle is repeated for 100 12 Load Cycle Test at Room ΔR/R25 <= ±20% cycles, and after the device is left at room temperature (25°C) Temperature for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below maximum rated value.) Continued on the following page. 61

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 PTGL Series Narrow Current Band Specifications and Test Methods Continued from the preceding page. Protective Threshold Current Test Conditions 1. Substrate Materials: Phenol Size: 50x50xt1.6mm Land Pattern: Cu land without through hole 25.0 2.5 2.5 5.0 2.5 ø0.9 25.0 3.0 1.0 25.0 25.0 (in mm) 2. Measurement condition Solder POSISTORr on the substrate, then put a 150mm3 cover surrounding POSISTORr to prevent airflow. 3. Measurement circuit POSISTORr D.C POWER +Digital +Digital D.V 1Ω D.V SUPPLY - Voltmeter - Voltmeter 62

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 PTGL Series Specifications and Test Methods Item Rating Value Method of Examination Continuous Operating The temperature range with maximum voltage applied to the Temperature -10 to +60 °C POSISTORr. Resistance value is measured by applying voltage under 1.5Vdc (by a direct current of less than 10mA) at 25°C. But it must be measured after maximum voltage is applied for Resistance Value 180 seconds and then is left for 2 hours at 25°C. Satisfies ratings (at 25°C) As for 16V series, measurement probes should be connected on the lead wire at the point within 2mm from the below side of the forming. Resistance should be measured by 4 wiring method. We apply AC voltage 120% (16V Series: 110%) that of the maximum voltage to POSISTORr by raising voltage gradually Withstanding Voltage No problem for 180±5 seconds at 25°C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below max. rated value.) The load is gradually applied to each terminal of POSISTORr until the force of the following table in the axial direction with fixing POSISTORr's body itself and this load is being kept for Tensile Strength of 10 seconds. No damage Lead Wire Terminal Lead Diameter Force ø0.60mm max. 4.90N ø0.65mm min. 9.80N POSISTORr is held so that it is perpendicular to the lead wire with the following lead hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90° and returned. Then it is slowly bent in the opposite direction and returned to original Bending Strength of Lead wire does not come off. state. Lead Wire Terminal Lead Diameter Force ø0.60mm max. 2.45N ø0.65mm min. 4.90N The Lead wire of POSISTORr is soaked in an Isopropyl Alcohol (JIS K 8839) or ethanol (JIS K 8101) solution (about 25wt%) of Solder is applied around the lead wire covering 3/4 or more of Solderability colophony (JIS K 5902) for 5 to 10 sec. And, each lead wire is the circumference without gap in the axial direction. soaked in molten solder (JIS Z 3282 H60A) at 235±5°C from the bottom to a point of 2.0 to 2.5mm for 2±0.5 sec. The lead wire of POSISTORr is soaked in molten solder (JIS Z Terminal Durability 3282 H60A) at 350±10°C from the bottom to a point of 2.0 to ΔR/R25<=±15% of Soldering 2.5mm for 3.5±0.5 sec. After the device is being left at room temperature (25°C) for 24±4 hours, the resistance is measured. POSISTORr is set in an environmental chamber at 40±2°C and 90 to 95% humidity for 500±4 hours. After the device is left at Humidity Test ΔR/R25<=±20% room temperature (25°C) for one hour, the resistance measurement is performed. POSISTORr is set in an environmental chamber at 60±3°C with maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. This cycle is repeated for Load Cycle Test at 1000±10 hours, and after the device is left at room ΔR/R25<=±20% High Temperature temperature (25°C) for one hour, the resistance measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below max. rated value.) 63

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Inrush Current Suppression (Less than 100µF) D max. T max. POSISTORr is one of lead type PTC Thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. It is able to integrated circuit for protection from inrush max. 0 current suppression with POSISTORr and relay or 6. semiconductor switch as thyristor. 5 1. 0± Features 4. F±1.5 ød±0.05 1. Protection against overcurrent situations 2. Automatic reset from protective trip mode (in mm) 3. Space-saving 4. Various characteristics to meet a suitable resistance value Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and products itself against overcurrent situation. It can be replaced from normal resistor or the resistor with temperature fuses solution as Fig.1. POSISTORr + + - Load - Load Fig.1 POSISTORr works as normal resistor in normal condition, and it works as protector against over current situation on 10 the circuit. 1. High-power switching power supply (LCD TV) 2. The power supply for inverter on outside unit for Air-conditioner 3. The power supply for inverter type fluorescent lamp 4. Other SW type power supply Max. Resistance Max. Inrush Max. Applying Body Thickness Lead Lead Part Number Voltage (at +25°C) Current Time of Inrush Diameter (D) (T) Space (F) Diameter (ød) (V) (Ω) (A) (ms) (mm) (mm) (mm) (mm) PTGL07AS121M0N51B0 280 120 ±20% 8.46 peak 10 7.8 6.0 5.0 0.5 PTGL07AS181M0N51B0 280 180 ±20% 6.22 peak 10 7.8 6.0 5.0 0.5 PTGL07AS201M0N51B0 280 200 ±20% 5.66 peak 10 7.8 6.0 5.0 0.5 Max. inrush current shows the maximum inrush current value which be introduced into "POSISTOR" at operating temperature range. Max. applying time of inrush shows the maximum applying time of inrush current value at operating temperature range. Operating temperature range is -40 to +105°C. Taping type of part numbers with "A0" is available. 64

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Inrush Current Suppression for High Capacitance (100µF or more) D max. T max. POSISTORr is one of lead type PTC Thermistor that is able to support overcurrent or inrush current issue on the power supply circuit. Ictu irsr eanbtle s tuop pinrteesgsrioante wd icthir cPuOitS fIoSrT pOrRorte acntido nre flraoym o rin rush 0 max. 6. semiconductor switch as thyristor. Features 5 1. Protection against overcurrent situations F±1.5 ød±0.05 0±1. 4. 2. Automatic reset from protective trip mode (in mm) 3. Space-saving 4. Various characteristics to meet a suitable resistance value Applications POSISTORr is an integrated solution to work as both current limit resistor and overcurrent fuse. It works as a stable resistor in normal operation and products itself against overcurrent situation. It can be replaced from normal resistor or the resistor with temperature fuses solution as Fig.1. POSISTORr + + - Load - Load Fig.1 POSISTORr works as normal resistor in normal condition, and it works as protector against over current situation on the circuit. 1. High-power switching power supply (LCD TV) 2. The power supply for inverter on outside unit for Air-conditioner 11 3. The power supply for inverter type fluorescent lamp 4. Other SW type power supply Max. Resistance Max. Inrush Max. Charge Max. Charge Body Thickness Lead Lead Part Number Voltage (at +25°C) Current Energy (at +60°C) Energy (at +85°C) Diameter (D) (T) Space (F) Diameter (ød) (V) (Ω) (A) (J) (J) (mm) (mm) (mm) (mm) PTGL14AS470H0B02BZ 280 47 ±25% 27 peak 106.9 56.9 16.0 6.5 10.0 0.6 PTGL16AS330H0B02BZ 280 33 ±25% 39 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS470H0B02BZ 280 47 ±25% 27 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS680H0B02BZ 280 68 ±25% 19 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL16AS101H0B02BZ 280 100 ±25% 13 peak 130.8 80.8 18.0 6.5 10.0 0.6 PTGL20AS330H0D02BZ 280 33 ±25% 39 peak 181.7 131.7 22.0 6.5 10.0 0.8 PTGL20AS470H0D02BZ 280 47 ±25% 27 peak 181.7 131.7 22.0 6.5 10.0 0.8 Max. inrush current shows the maximum applying time of inrush current value at operating temperature range. Max charge energy is defined as the maximum charged up energy value of over 95%. The capacitance is calculated as the following formula. J=CV^2/2 C: capacitance, V: peak voltage Note: The criteria of the standard for the maximum charged up energy value of over 95%. If there is the difference between our definition and yours, could you ask us free? Operating temperature range is -20 to +85°C. 65

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Inrush Current Suppression Specifications and Test Methods Item Rating Value Method of Examination POSISTORr is set in an environmental chamber at 85±3°C and 85% humidity for 500±4 hours. Humidity Test ΔR/R25 <= ±20% After the device is left at room temperature (25°C) for one hour, the resistance measurement is performed. POSISTORr is set in an environmental chamber at 85±3°C with High Temperature maximum voltage applied for 500±4 hours. Continuous Load ΔR/R25 <= ±20% After the device is left at room temperature (25°C) for one hour, the resistance measurement is performed. POSISTORr is set in a room temperature (25±2°C) with maximum voltage applied for 1 minute, and then is left without Load Cycle Test at Room Temperature ΔR/R25 <= ±20% voltage applied for 5 minutes. This cycle is repeated for 10k cycles, and after the device is left at room temperature (25°C) for one hour, the resistance measurement is performed. 66

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overheat Sensing Chip Tight Tolerance Type This chip PTC Thermistor is a reflow soldering SMD type e g e for overheat sensing for power transistors, power diodes and power ICs in hybrid circuits. Features T 1. SMD type is helpful for miniaturizing circuits L W because of its small size and light weight. Dimensions (mm) Part Number L W T e g 2. Excellent thermal response due to small size PRF15_RC 1.0±0.050.5±0.050.5±0.050.15 to 0.40.3 min. 3. Solid-state construction provides excellent resistance PRF18_RB 1.6±0.150.8±0.150.8±0.150.1 to 0.6 - to mechanical vibration and impact resistance. 4. Contactless operation provides noiseless operation. Chip Tight Tolerance Type 0402 (1005) Size Sensing Temperature Sensing Temperature Maximum Resistance Operating Part Number (at 10kΩ) (at 100kΩ) Voltage (at 25°C) Temperature Range (°C) (°C) (V) (kΩ) (°C) PRF15AR102RB6RC 135 ±5°C 150 ±3°C 32 1 ±50% -40 to 160 PRF15BA102RB6RC 125 ±5°C 140 ±3°C 32 1 ±50% -40 to 150 PRF15BB102RB6RC 115 ±5°C 130 ±3°C 32 1 ±50% -40 to 140 PRF15BC102RB6RC 105 ±5°C 120 ±3°C 32 1 ±50% -40 to 130 PRF15BD102RB6RC 95 ±5°C 110 ±3°C 32 1 ±50% -40 to 120 PRF15BE102RB6RC 85 ±5°C 100 ±3°C 32 1 ±50% -40 to 110 PRF15BF102RB6RC 75 ±5°C 90 ±3°C 32 1 ±50% -40 to 100 PRF15BG102RB6RC 65 ±5°C 80 ±3°C 32 1 ±50% -40 to 90 This series is applied to reflow soldering. Sensing Temperature Maximum Resistance Operating Part Number (at 4.7MΩ) Voltage (at 25°C) Temperature Range (°C) (V) (kΩ) (°C) PRF15BB103RB6RC 130 ±3°C 32 10 ±50% -20 to 140 PRF15BE103RB6RC 100 ±3°C 32 10 ±50% -20 to 110 PRF15BG103RB6RC 80 ±3°C 32 10 ±50% -20 to 90 This series is applied to reflow soldering. Chip Tight Tolerance Type 0603 (1608) Size Sensing Temperature Sensing Temperature Maximum Resistance Operating Part Number (at 4.7kΩ) (at 47kΩ) Voltage (at 25°C) Temperature Range (°C) (°C) (V) (Ω) (°C) 12 PRF18BB471RB5RB 115 ±3°C 130 ±7°C 32 470 ±50% -20 to 140 PRF18BC471RB5RB 105 ±3°C 120 ±7°C 32 470 ±50% -20 to 130 PRF18BD471RB5RB 95 ±3°C 110 ±7°C 32 470 ±50% -20 to 120 PRF18BE471RB5RB 85 ±3°C 100 ±7°C 32 470 ±50% -20 to 110 PRF18BF471RB5RB 75 ±3°C 90 ±7°C 32 470 ±50% -20 to 100 PRF18BG471RB5RB 65 ±3°C 80 ±7°C 32 470 ±50% -20 to 90 This series is applied to flow/reflow soldering. This series is recognized by UL. 67

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overheat Sensing Chip Type This chip PTC Thermistor is a reflow soldering SMD type e g e for overheat sensing for power transistors, power diodes and power ICs in hybrid circuits. Features T 1. SMD type is helpful for miniaturizing circuits L W because of its small size and light weight. Dimensions (mm) Part Number 2. Excellent thermal response due to small size L W T e g PRF18_RB 1.6±0.150.8±0.150.8±0.150.1 to 0.6 - 3. Solid-state construction provides excellent resistance PRF21_RA 2.0±0.21.25±0.20.9±0.2 0.2 min. 0.5 min. to mechanical vibration and impact resistance. 4. Contactless operation provides noiseless operation. Chip Type 0603 (1608) Size Sensing Temperature Sensing Temperature Maximum Resistance Operating Part Number (at 4.7kΩ) (at 47kΩ) Voltage (at 25°C) Temperature Range (°C) (°C) (V) (Ω) (°C) PRF18AS471QB5RB 145 ±5°C - 32 470 ±50% -20 to 160 PRF18AR471QB5RB 135 ±5°C 150 ±7°C 32 470 ±50% -20 to 160 PRF18BA471QB5RB 125 ±5°C 140 ±7°C 32 470 ±50% -20 to 150 PRF18BB471QB5RB 115 ±5°C 130 ±7°C 32 470 ±50% -20 to 140 PRF18BC471QB5RB 105 ±5°C 120 ±7°C 32 470 ±50% -20 to 130 PRF18BD471QB5RB 95 ±5°C 110 ±7°C 32 470 ±50% -20 to 120 PRF18BE471QB5RB 85 ±5°C 100 ±7°C 32 470 ±50% -20 to 110 PRF18BF471QB5RB 75 ±5°C 90 ±7°C 32 470 ±50% -20 to 100 PRF18BG471QB5RB 65 ±5°C 80 ±7°C 32 470 ±50% -20 to 90 This series is applied to flow/reflow soldering. This series is recognized by UL. Chip Type 0805 (2012) Size Sensing Temperature Maximum Resistance Operating Part Number (at 4.7kΩ) Voltage (at 25°C) Temperature Range (°C) (V) (Ω) (°C) PRF21AS471QB5RA 145 ±5°C 32 470 ±50% -20 to 160 PRF21AR471QB5RA 135 ±5°C 32 470 ±50% -20 to 150 PRF21BA471QB5RA 125 ±5°C 32 470 ±50% -20 to 140 PRF21BB471QB5RA 115 ±5°C 32 470 ±50% -20 to 130 PRF21BC471QB5RA 105 ±5°C 32 470 ±50% -20 to 120 PRF21BD471QB5RA 95 ±5°C 32 470 ±50% -20 to 110 PRF21BE471QB5RA 85 ±5°C 32 470 ±50% -20 to 100 This series is applied to flow/reflow soldering. This series is recognized by UL. 13 68

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Type (Related Data) Standard Land Pattern Dimensions Resistance - Temperature Characteristics (Typical) Solder resist BG BE BC BA BF BD BB Chip Land 1000 c AR 100 AS 5) b a R2 (in mm) R/ Part Number SMoeldtheoridnsg Chip (LxWDi)mensaions (mbm) c Change ( 10 PPPRRRFFF112581 Reflow Soldering 211.0..06xxx100.2..585 01..600--.501..82000...465---000...57701..600--.501..82 Resistance 1 0.1 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Overheat Protection Circuit Temperature Sensing Circuit +Vcc +Vcc R1 RL RL1 RE2 PTH Thermal Connection R1 RL2 R2 Load RE RE1 PTH 69

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type (Reference Data) Resistance - Temperature Characteristics Range PRF15AR102RB6RC PRF15BA102RB6RC 1000 1000 100 100 Ω) Ω) Resistance (k 10 Resistance (k 10 1 1 0.1 0.1 –40 0 40 80 120 160 200 –40 0 40 80 120 160 200 Ambient Temperature (°C) Ambient Temperature (°C) PRF15BB102RB6RC PRF15BC102RB6RC 1000 1000 100 100 Ω) Ω) Resistance (k 10 Resistance (k 10 1 1 0.1 0.1 –40 0 40 80 120 160 200 –40 0 40 80 120 160 200 Ambient Temperature (°C) Ambient Temperature (°C) PRF15BD102RB6RC PRF15BE102RB6RC 1000 1000 100 100 Ω) Ω) Resistance (k 10 Resistance (k 10 1 1 0.1 0.1 –40 0 40 80 120 160 200 –40 0 40 80 120 160 200 Ambient Temperature (°C) Ambient Temperature (°C) Continued on the following page. 70

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type (Reference Data) Continued from the preceding page. Resistance - Temperature Characteristics Range PRF15BF102RB6RC PRF15BG102RB6RC 1000 1000 100 100 Ω) Ω) Resistance (k 10 Resistance (k 10 1 1 0.1 0.1 –40 0 40 80 120 160 200 –40 0 40 80 120 160 200 Ambient Temperature (°C) Ambient Temperature (°C) PRF15BB103RB6RC PRF15BE103RB6RC 100000 100000 10000 10000 Resistance (kΩ) 1010000 Resistance (kΩ) 1100000 10 10 1 1 -20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 Ambient Temperature (°C) Ambient Temperature (°C) PRF15BG103RB6RC PRF18BB471RB5RB 100000 100000 10000 10000 Resistance (kΩ) 1100000 Resistance (Ω) 1000 10 1 100 –20 0 20 40 60 80 100 120 140 –20 0 20 40 60 80 100 120 140 160 Ambient Temperature (°C) Temperature (°C) Continued on the following page. 71

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type (Reference Data) Continued from the preceding page. Resistance - Temperature Characteristics Range PRF18BC471RB5RB PRF18BD471RB5RB 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PRF18BE471RB5RB PRF18BF471RB5RB 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PRF18BG471RB5RB 100000 10000 Ω) Resistance ( 1000 100 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) 72

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Type (Reference Data) Resistance - Temperature Characteristics Range PRF18/21AS471Q Type PRF18/21AR471Q Type 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PRF18/21BA471Q Type PRF18/21BB471Q Type 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PRF18/21BC471Q Type PRF18/21BD471Q Type 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) Continued on the following page. 73

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Type (Reference Data) Continued from the preceding page. Resistance - Temperature Characteristics Range PRF18/21BE471Q Type PRF18BF471Q Type 100000 100000 10000 10000 Ω) Ω) Resistance ( Resistance ( 1000 1000 100 100 –20 0 20 40 60 80 100 120 140 160 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PRF18BG471Q Type 100000 10000 Ω) Resistance ( 1000 100 –20 0 20 40 60 80 100 120 140 160 Temperature (°C) 74

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods PRF15_102 Series No. Item Rating Value Metheod of Examination After applying maximum operating voltage for 3 mins. and 1 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC1.0V. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 2 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 3 Solderability Wetting of soldering area: >= 95% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] · Appearance: No defects or abnormalities · Solder: Sn-3.0Ag-0.5Cu 4 Resistance to Soldering Heat · Resistance (R25) change: Less than ±20% (*) · Preheat: 150±5°C, 90 to 120s · Solder temp.: 260±5°C · Immersion time: 10±1s Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 5 High Temperature Storage · (Max. operating temp.)±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 6 Low Temperature Storage · (Min. operating temp.)±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 7 Damp Heat, Steady State · +85±2°C, 85±5%RH · 1000+48/-0 hrs · Appearance: No defects or abnormalities Reference standard: IEC 60068-2-14 (2009) · Resistance (R25) change: Less than ±20% (*) [ Test Na ] · Soldered PTC to PCB (**) · Transport time: <10 sec. · Test condition: See below table 8 Thermal Shock Step Condition Time 1 (Min. Operating temp.)±3°C 30min. 2 (Max. Operating temp.)±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 9 High Temperature Load · (Max. operating temp.)±2°C · Applied max. voltage · 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.0V after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard land dimension · Standard solder paste · Standard solder profile Above conditions are mentioned in Notice. 75

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods PRF15_103R Series No. Item Rating Value Metheod of Examination After applying maximum operating voltage for 3 mins. and 1 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC3.0V. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 2 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 3 Solderability Wetting of soldering area: >= 95% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] · Appearance: No defects or abnormalities · Solder: Sn-3.0Ag-0.5Cu 4 Resistance to Soldering Heat · Resistance (R25) change: Less than ±20% (*) · Preheat: 150±5°C, 90 to 120s · Solder temp.: 260±5°C · Immersion time: 10±1s Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 5 High Temperature Storage · (Max. operating temp.)±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 6 Low Temperature Storage · (Min. operating temp.)±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 7 Damp Heat, Steady State · +60±2°C, 90±5%RH · 1000+48/-0 hrs · Appearance: No defects or abnormalities Reference standard: IEC 60068-2-14 (2009) · Resistance (R25) change: Less than ±20% (*) [ Test Na ] · Soldered PTC to PCB (**) · Transport time: <10 sec. · Test condition: See below table 8 Thermal Shock Step Condition Time 1 (Min. Operating temp.)±3°C 30min. 2 (Max. Operating temp.)±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 9 High Temperature Load · (Max. operating temp.)±2°C · Applied max. voltage · 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC3.0V after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard land dimension · Standard solder paste · Standard solder profile Above conditions are mentioned in Notice. 76

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Tight Tolerance Type Specifications and Test Methods PRF18_471R Series No. Item Rating Value Metheod of Examination After applying maximum operating voltage for 3 mins. and 1 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) Reference standard: IEC 60068-2-21 (2006) · Soldered PTC to PCB (**) 2 Adhesive Strength There is no sign of exfoliation on electrode. · Force: 5.0N · Test time: 10±1 sec. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 3 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 4 Solderability Wetting of soldering area: >= 95% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] · Appearance: No defects or abnormalities · Solder: Sn-3.0Ag-0.5Cu 5 Resistance to Soldering Heat · Resistance (R25) change: Less than ±20% (*) · Preheat: 150±5°C, 90 to 120s · Solder temp.: 260±5°C · Immersion time: 10±1s Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 6 High Temperature Storage · +150±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 7 Low Temperature Storage · -20±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 8 Damp Heat, Steady State · +40±2°C, 90±5%RH · 500+24/-0 hrs · Appearance: No defects or abnormalities Reference standard: IEC 60068-2-14 (2009) · Resistance (R25) change: Less than ±20% (*) [ Test Na ] · Soldered PTC to PCB (**) · Transport time: <10 sec. · Test condition: See below table 9 Thermal Shock Step Condition Time 1 -20±3°C 30min. 2 +150±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 10 High Temperature Load · +85±2°C · Applied max. voltage · 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard land dimension · Standard solder paste · Standard solder profile Above conditions are mentioned in Notice. 77

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Overheat Sensing Chip Type Specifications and Test Methods PRF18/21_471Q Series No. Item Rating Value Metheod of Examination After applying maximum operating voltage for 3 mins. and 1 Resistance Value at 25°C Within the specified range leaving for 2 hours in 25°C, measured by applying voltage less than DC1.5V. (by a direct current less than 10mA) Reference standard: IEC 60068-2-21 (2006) · Soldered PTC to PCB (**) 2 Adhesive Strength There is no sign of exfoliation on electrode. · Force: 5.0N · Test time: 10±1 sec. Reference standard: IEC 60068-2-6 (2007) · Soldered PTC to PCB (**) · Frequency range: 10 to 55Hz · Appearance: No defects or abnormalities 3 Vibration · Amplitude: 1.5mm · Resistance (R25) change: Less than ±20% (*) · Sweep rate: 1 octave/min. · Direction: X-Y-Z (3 direction) · 24 cycles in each axis Reference standard: IEC 60068-2-58 (2004) · Solder: Sn-3.0Ag-0.5Cu 4 Solderability Wetting of soldering area: >= 95% · Solder temp.: 245±5°C · Immersion time: 3±0.3s Reference standard: IEC 60068-2-58 (2004) [ Solder bath method ] · Appearance: No defects or abnormalities · Solder: Sn-3.0Ag-0.5Cu 5 Resistance to Soldering Heat · Resistance (R25) change: Less than ±20% (*) · Preheat: 150±5°C, 90 to 120s · Solder temp.: 260±5°C · Immersion time: 10±1s Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 6 High Temperature Storage · +150±2°C · 1000+48/-0 hrs. Reference standard: IEC 60068-2-1 (2007) · Soldered PTC to PCB (**) 7 Low Temperature Storage · -20±3°C · 1000+48/-0 hrs Reference standard: IEC 60068-2-67 (1995) · Soldered PTC to PCB (**) 8 Damp Heat, Steady State · +40±2°C, 90±5%RH · 500+24/-0 hrs · Appearance: No defects or abnormalities Reference standard: IEC 60068-2-14 (2009) · Resistance (R25) change: Less than ±20% (*) [ Test Na ] · Soldered PTC to PCB (**) · Transport time: <10 sec. · Test condition: See below table 9 Thermal Shock Step Condition Time 1 -20±3°C 30min. 2 +150±2°C 30min. · Test cycle: 5 cycles Reference standard: IEC 60068-2-2 (2007) · Soldered PTC to PCB (**) 10 High Temperature Load · +85±2°C · Applied max. voltage · 1000+48/-0 hrs. *: The resistance value after the test. It is measured by applying voltage less than DC1.5V (by a direct current less than 10mA) after left at 25±2°C for 2hrs. **: Above mentioned soldering is done under the following conditions at our side. · Glass-Epoxy PC board · Standard land dimension · Standard solder paste · Standard solder profile Above conditions are mentioned in Notice. 78

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 POSISTORr for Circuit Protection Overheat Sensing Lead Type 5.0 max. 4.0 max. "PTFM Series" is a screw clamp type temperature sensor which has been developed for sensing the temperature of Transistors, Thyristors, stereo main amplifiers, and other devices having risk of overheat. max. 0 3. "PTFL Series" is a popular lead type temperature sensor which is suitable for use as an air temperature 3.5±1.5 min. sensing. 25 ø0.5±0.05 PTFL Series "PTFM_S" Series is a screw clamp type temperature sensor which have high environmental reliability. (in mm) It is certified by UL/cUL/VDE. 7.5±0.4 3.0±0.3 Features 3.7±0.3 t0.5±0.05 1. PTFM_S Series is fixed easily to objects because of a 0.5 2± screw clamp type. 13. 2. Compact and light design as well as excellent thermal response. max. 5 3. Contactless operation provides a prolonged service 3.5±1.5 2. life, yet permits noiseless operation. 5 9± 4. The operating point of "POSISTOR" is set on the 3 PTFM Series ø0.5±0.05 steepest point along the resistance-temperature characteristic curve, thus performing the overheat in mm protective operation securely. 5. PTFM Series and PTFL Series have same resistance- temperature characteristics, providing a selection depending on the mounting method. 6. PTFM_S Series is certified by UL/cUL/VDE. It is suitable for a powersupply, etc, required the safety standard. Part Number Part Number Max. Voltage Sensing Temp. (TS) Resistance Value Resistance Value Resistance Value at 25°C (max.) (TS-10°C) (max.) (TS°C) (min.) (Lead Type) (with Lug-Terminal Type) (V) (°C) (Ω) (Ω) (Ω) PTFL04BH471Q2N34B0 PTFM04BH471Q2N34BS 16 60 100 330 470 PTFL04BG471Q2N34B0 PTFM04BG471Q2N34BS 16 70 100 330 470 PTFL04BF471Q2N34B0 PTFM04BF471Q2N34BS 16 80 100 330 470 PTFL04BE471Q2N34B0 PTFM04BE471Q2N34BS 16 90 100 330 470 PTFL04BD471Q2N34B0 PTFM04BD471Q2N34BS 16 100 100 330 470 PTFL04BC471Q2N34B0 PTFM04BC471Q2N34BS 16 110 100 330 470 PTFL04BB471Q2N34B0 PTFM04BB471Q2N34BS 16 120 100 330 470 PTFL04BH222Q2N34B0 PTFM04BH222Q2N34BS 16 60 330 1.5k 2.2k PTFL04BG222Q2N34B0 PTFM04BG222Q2N34BS 16 70 330 1.5k 2.2k PTFL04BF222Q2N34B0 PTFM04BF222Q2N34BS 16 80 330 1.5k 2.2k PTFL04BE222Q2N34B0 PTFM04BE222Q2N34BS 16 90 330 1.5k 2.2k PTFL04BD222Q2N34B0 PTFM04BD222Q2N34BS 16 100 330 1.5k 2.2k PTFL04BC222Q2N34B0 PTFM04BC222Q2N34BS 16 110 330 1.5k 2.2k PTFL04BB222Q2N34B0 PTFM04BB222Q2N34BS 16 120 330 1.5k 2.2k 14 Operating temperature range is -10 to TS+10°C. 79

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Resistance - Temperature Characteristics Example of Thermal Response Time Operating Time of POSISTORr 100 104 BB BC 80 BD 103 BE 0°C) PTFM04BE222Q2N34BS 9 25°C) BGBF %) (R/R 60 SPcrOeSwISTORr R meter Resistance Change (R/R 11002 BH Resistance Change ( 2400 AT=lu9m0°inCu mco npslattaent Heater 1 0 0 10 20 30 40 50 60 Time (sec.) Relation between resistance change and time after POSISTORr –20 0 20 40 60 80 100 120 140 PTFM04BE222Q2N34BS is installed on the part heated at a constant Temperature (°C) temperature of 90°C (3mm thick alminum sheet) is shown in the figure above. Overheat Protection Circuit Overheat Sensing Circuit +Vcc +Vcc R1 RL RL1 RE2 PTH Thermal Connection R1 RL2 R2 Load RE RE1 PTH Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BH471Q Type PTF_04BG471Q Type 104 104 103 103 Ω) Ω) Resistance ( 102 Resistance ( 102 10 10 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) 14 Continued on the following page. 80

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BF471Q Type PTF_04BE471Q Type 104 104 103 103 Ω) Ω) Resistance ( 102 Resistance ( 102 10 10 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) PTF_04BD471Q Type PTF_04BC471Q Type 104 104 103 103 Ω) Ω) Resistance ( 102 Resistance ( 102 10 10 -20 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) PTF_04BB471Q Type PTF_04BH222Q Type 104 105 103 104 Ω) Ω) Resistance ( 102 Resistance ( 103 10 102 14 0 20 40 60 80 100 120 140 160 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) Continued on the following page. 81

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Continued from the preceding page. Resistance - Temperature Characteristics Range (Ref. Only) PTF_04BG222Q Type PTF_04BF222Q Type 105 105 104 104 Ω) Ω) Resistance ( 103 Resistance ( 103 102 102 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) PTF_04BE222Q Type PTF_04BD222Q Type 105 105 104 104 Ω) Ω) Resistance ( 103 Resistance ( 103 102 102 -20 0 20 40 60 80 100 120 140 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) PTF_04BC222Q Type PTF_04BB222Q Type 105 105 104 104 Ω) Ω) Resistance ( 103 Resistance ( 103 102 102 14 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 Temperature (°C) Temperature (°C) 82

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Temperature Sensor Lead Type Specifications and Test Methods No. Item Rating Value Method of Examination Resistance value is measured by applying voltage under 1.5Vdc 1 Resistance Value Satisfies specification (by a direct current of less than 10mA) in a silicone oil vessel. We apply AC voltage 120% that of the maximum voltage to POSISTORr by raising voltage gradually for 180±5 seconds at 2 Withstanding Voltage No problem 25°C. (A protective resistor is to be connected in series, and the inrush current through POSISTORr must be limited below max. rated value.) The load is gradually applied to each terminal of POSISTORr Tensile Strength of 3 No damage until 9.80N in the axial-direction with fixing POSISTORr's body Lead Wire Terminal itself and this load is kept for 10 seconds. POSISTORr is held so that it is perpendicular to the lead wire with the following load hanging in the axial direction of the lead wire. The lead wire is slowly bent to 90° and returned; then it is slowly bent in the opposite direction and returned to original state. Bending Strength of 4 Lead wire does not come off. (Above mentioned procedure is done slowly with one cycle.) Lead Wire Terminal Series Force PTFL 2.45N PTFM 4.90N The lead wire of POSISTORr is soaked in a Isopropyl Alcohol Solder is applied around the lead wire covering (JIS K 8839) or ethanol (JIS K 8101) solution (about 25wt%) of 5 Solderability 3/4 or more of the circumference without gap in colophony (JIS K 5902) for 5-10 sec. And, each lead wire is the axial-direction. soaked in molten solder (JIS Z 3282 H60A) at 235±5°C from the bottom to a point of 2.0-2.5mm for 2±0.5 seconds. The lead wire of POSISTORr is soaked in molten solder (JIS Z 6 Terminal Durability of ΔR/R25 <= ±15% 3282 H60A) at 350±10°C from the bottom to a point of 2.0-2.5 Soldering mm for 3.5±0.5 seconds. And, after the device is left at room temperature (25°C) for 24±4 hours, the resistance is measured. POSISTORr is set in an environmental chamber at 40±2°C and 7 Damp Heat ΔR/R25 <= ±20% 90-95% humidity for 500±4 hours. And after the device is left at room temperature (25°C) for one hour, the resistance measurement is performed. ΔR/R25 <= ±20% POSISTORr is set in an environmental chamber at 85±3°C with PTH maximum voltage applied for 1.5 hours and then is left without voltage applied for 0.5 hours. This cycle is repeated for 1000±10 hours, and after the device is 8 High Temperature Load left at room temperature (25°C) for one hour, the resistance Rs measurement is performed. (A protective resistor is to be connected in series and the inrush current through POSISTORr must be limited below max. rated S.W value.) Test circuit 14 83

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice !Caution (Storage and Operating Condition) This product is designed for application in an 2. Volatile or flammable gas ordinary environment (normal room temperature, 3. Dusty conditions humidity and atmospheric pressure). Do not use under 4. Under vacuum, or under high or low pressure the following conditions because all of these factors 5. Wet or humid conditions can deteriorate the characteristics or cause product 6. Places with salt water, oils, chemical liquids or failure and burn-out. organic solvents 1. Corrosive gas or deoxidizing gas (Chlorine gas, 7. Strong vibrations Hydrogen sulfide gas, Ammonia gas, Sulfuric acid 8. Other places where similar hazardous conditions gas, Nitric oxide gas, etc.) exist !Caution (Other) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage that may be caused by the abnormal function or the failure of our product. Notice (Storage and Operating Condition) To keep solderability of product from declining, 3. Handling after unpacking: the following storage conditions are recommended. After unpacking, promptly reseal this product or 1. Storage condition: store it in a sealed container with a drying agent. Temperature -10 to +40°C 4. Storage place: Humidity less than 75%RH (not dewing condition) Do not store this product in corrosive gas 2. Storage term: (Sulfuric acid, Chlorine, etc.) or in direct Use this product within 6 months after delivery sunlight. by first-in and first-out stocking system. Notice (Soldering and Mounting) PTGL Series When the lead of this product is soldered, observe the following points to avoid the decline of element characteristics or break-down of the element. 1. Use rosin type flux or non-activated flux 2. Do not dip the body into flux (flux should be coated to lead wire only for soldering). 3. Be sure that preheating does not melt the soldering of this product. Notice (Soldering and Mounting) PTFL/PTFM Series 1. PTFM Series is to be screwed beside the Power- 4. When the lead of this product is soldered, observe Transistor on the radiative plate. the following points to avoid the decline of 2. If PTFL Series is to be mounted with thermal cement, element characteristics or break-down of the the cement should not be of the Cyano Acrylate element. family. (1) Use rosin type flux or non-activated flux. 3. Please bend the lead wire far from the root of the (2) Do not dip the body into flux. body and do not apply force to the lead wire of (Flux should be coated to lead wire only for the product. soldering.) (3) Be sure that preheating does not melt the soldering of this product. 84

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Soldering and Mounting) PRG15 Series 1. Solder and Flux (1) Solder Paste (2) Flux Use solder paste Sn:Pb=63:37wt%. Use rosin type flux in soldering process. For your reference, we are using If below flux is used, some problems might be caused in 63Sn/37Pb RMA9086 90-3-M18, the product characteristics and reliability. manufactured by Alpha Metals Japan Ltd. Please do not use below flux. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, (cid:70)(cid:3)(cid:23)(cid:50)(cid:48)(cid:45)(cid:44)(cid:37)(cid:3)(cid:31)(cid:33)(cid:39)(cid:34)(cid:39)(cid:33)(cid:3)(cid:114)(cid:51)(cid:54)(cid:3)(cid:72)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:38)(cid:31)(cid:42)(cid:39)(cid:34)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:50)(cid:35)(cid:44)(cid:50)(cid:3)(cid:35)(cid:54)(cid:33)(cid:35)(cid:35)(cid:34)(cid:39)(cid:44)(cid:37)(cid:3) manufactured by Senju Metal Industry Co., LTD for any 0.2wt%). Internal tests of this product. (cid:70)(cid:3)(cid:27)(cid:31)(cid:50)(cid:35)(cid:48)(cid:81)(cid:49)(cid:45)(cid:42)(cid:51)(cid:32)(cid:42)(cid:35)(cid:3)(cid:114)(cid:51)(cid:54) (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning Less than 5 minutes Less than 1 minute at room temp. 20W/L Frequency 2-propanol or of several 10kHz Less than 2 minutes to 100kHz. at 40˚C max. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. E (b) After soldering, the solder fillet should be a height T from 0.15 mm to the thickness of this product (see the figure at right). Electrode Solder (c) Too much solder gives too strong mechanical stress Solder to this product. Such stress may cause cracking or 0.15mm <= T <= E other mechanical damage. Also, it can destroy the electrical performance of this product. Continued on the following page. 85

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Continued from the preceding page. (2) Reflow soldering conditions The following figure and table show our recommended Temp. (°C) reflow profile. 260°C (a) Insufficient preheating may cause a crack on 250°C ceramic body. The temperature difference between 220°C Limit Profile preheat and peak should be control within 100°C to prevent this. 180°C (b) The excessive soldering conditions may cause dissolution of metallization or deterioration of 150°C solder-wetting on the external electrode. Standard Profile (c) Rapid cooling by dipping in solvent or by other Time (s) means is not recommended. 90±30s 30 to 60s (d) Please evaluate it on your condition if you will do 90s mounting using not applying condition to the above-mentioned. Standard Profile Limit Profile Preheat 150 to 180°C, 90±30s Soldering Time (>= 220°C) 30 to 60s 90s Peak Temp. 250°C 260°C Reflow Cycle Max. 2 times Max. 2 times (3) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 86

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Soldering and Mounting) PRG18/21 Series 1. Solder and Flux (1) Solder Paste (2) Flux Use solder paste Sn:Pb=63:37wt%. Use rosin type flux in the soldering process. For your reference, we are using If the flux below is used, some problems might be 63Sn/37Pb RMA9086 90-3-M18, caused in the product characteristics and reliability. manufactured by Alpha Metals Japan Ltd. Please do not use these types of flux. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, (cid:70)(cid:3)(cid:23)(cid:50)(cid:48)(cid:45)(cid:44)(cid:37)(cid:3)(cid:31)(cid:33)(cid:39)(cid:34)(cid:39)(cid:33)(cid:3)(cid:114)(cid:51)(cid:54)(cid:3)(cid:72)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:38)(cid:31)(cid:42)(cid:39)(cid:34)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:50)(cid:35)(cid:44)(cid:50)(cid:3)(cid:35)(cid:54)(cid:33)(cid:35)(cid:35)(cid:34)(cid:39)(cid:44)(cid:37)(cid:3) manufactured by Senju Metal Industry Co., LTD for any 0.2wt%). internal tests of this product. (cid:70)(cid:3)(cid:27)(cid:31)(cid:50)(cid:35)(cid:48)(cid:81)(cid:49)(cid:45)(cid:42)(cid:51)(cid:32)(cid:42)(cid:35)(cid:3)(cid:114)(cid:51)(cid:54) (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. Solvent Dipping Cleaning Ultrasonic Cleaning Drying Less than 5 minutes Less than 1 minute at room temp. After cleaning, 20W/L Frequency 2-propanol or promptly dry of several 10kHz Less than 2 minutes this product. to 100kHz. at 40˚C max. A sufficient cleaning should be applied to remove flux completely. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.15 to 0.20 mm. E (b) After soldering, the solder fillet should be a height T from 0.2 mm to the thickness of this product (see the figure at right). Electrode Solder (c) Too much solder result in excessive mechanical Solder < < stress to this product. Such stress may cause 0.2mm = T = E cracking or other mechanical damage. Also, it can destroy the electrical performance of this product. Continued on the following page. 87

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Continued from the preceding page. (2) Allowable Soldering Temperature and Time Allowable Reflow Soldering Temp. and Time (a) Solder within the temperature and time 270 combinations, indicated by the slanted lines in the graphs at right. 260 (b) Excessive soldering conditions may cause C)250 dsoislsdoelru-twioent toinf gm oent atlhliez aetxiotenr onra ld eelteecrtiororadteio.n of ature (°240 (c) In the case of repeated soldering, the accumulated per230 m soldering time should be within the range shown at Te220 right. (For example, Reflow peak temperature: 260°C, 210 twice –> The accumulated soldering time at 260°C is 200 within 15sec.) 0 10 20 30 40 50 60 Time (second) (3) Standard Temperature Profile for Soldering Reflow Soldering Conditions (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating Gradual cooling Preheating (in air) Soldering (in air) temperature and maximum temperature in the C) profile should be 100°C. ure (°200 240°C (b) Rapid cooling by dipping in solvent or by other erat p means is not recommended. m100 e T 0 1 to 2 min. *20 sec. Preheating: 150±10°C, 1 to 2 minutes Soldering: 240°C, 20 sec. * In the case of repeated soldering, the accumulated soldering time should be within the range shown in "(2) Allowable Soldering Temperature and Time." (4) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under the specified mounting conditions. 88

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Soldering and Mounting) PRF15_102R Series 1. Solder and Flux (1) Solder Paste (2) Flux Use solder paste Sn:Pb=63:37wt%. Use rosin type flux in soldering process. For your reference, we are using If below flux is used, some problems might be caused in 63Sn/37Pb RMA9086 90-3-M18, the product characteristics and reliability. manufactured by Alpha Metals Japan Ltd. Please do not use below flux. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, (cid:70)(cid:3)(cid:23)(cid:50)(cid:48)(cid:45)(cid:44)(cid:37)(cid:3)(cid:31)(cid:33)(cid:39)(cid:34)(cid:39)(cid:33)(cid:3)(cid:114)(cid:51)(cid:54)(cid:3)(cid:72)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:38)(cid:31)(cid:42)(cid:39)(cid:34)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:50)(cid:35)(cid:44)(cid:50)(cid:3)(cid:35)(cid:54)(cid:33)(cid:35)(cid:35)(cid:34)(cid:39)(cid:44)(cid:37)(cid:3) manufactured by Senju Metal Industry Co., LTD for any 0.2wt%). Internal tests of this product. (cid:70)(cid:3)(cid:27)(cid:31)(cid:50)(cid:35)(cid:48)(cid:81)(cid:49)(cid:45)(cid:42)(cid:51)(cid:32)(cid:42)(cid:35)(cid:3)(cid:114)(cid:51)(cid:54) (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning Less than 5 minutes Less than 1 minute at room temp. 20W/L Frequency 2-propanol or of several 10kHz Less than 2 minutes to 100kHz. at 40˚C max. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. E (b) After soldering, the solder fillet should be a height T from 0.15 mm to the thickness of this product (see the figure at right). Electrode Solder (c) Too much solder gives too strong mechanical stress Solder to this product. Such stress may cause cracking or 0.15mm <= T <= E other mechanical damage. Also, it can destroy the electrical performance of this product. Continued on the following page. 89

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Continued from the preceding page. (2) Reflow soldering conditions The following figure and table show our recommended Temp. (°C) reflow profile. 270°C (a) Insufficient preheating may cause a crack on 250°C ceramic body. The temperature difference between 220°C Limit Profile preheat and peak should be control within 100°C to prevent this. 180°C (b) The excessive soldering conditions may cause dissolution of metallization or deterioration of 150°C solder-wetting on the external electrode. Standard Profile (c) Rapid cooling by dipping in solvent or by other Time (s) means is not recommended. 90±30s 30 to 60s (d) Please evaluate it on your condition if you will do 90s mounting using not applying condition to the above-mentioned. Standard Profile Limit Profile Preheat 150 to 180°C, 90±30s Soldering Time (>= 220°C) 30 to 60s 90s Peak Temp. 250°C 270°C Reflow Cycle Max. 2 times Max. 2 times (3) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 90

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Soldering and Mounting) PRF15_103R Series 1. Solder and Flux (1) Solder Paste (2) Flux Use solder paste Sn:Pb=63:37wt%. Use rosin type flux in soldering process. For your reference, we are using If below flux is used, some problems might be caused in 63Sn/37Pb RMA9086 90-3-M18, the product characteristics and reliability. manufactured by Alpha Metals Japan Ltd. Please do not use below flux. 96.5Sn/3.0Ag/0.5Cu M705-GRN360-K2-V, (cid:70)(cid:3)(cid:23)(cid:50)(cid:48)(cid:45)(cid:44)(cid:37)(cid:3)(cid:31)(cid:33)(cid:39)(cid:34)(cid:39)(cid:33)(cid:3)(cid:114)(cid:51)(cid:54)(cid:3)(cid:72)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:38)(cid:31)(cid:42)(cid:39)(cid:34)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:50)(cid:35)(cid:44)(cid:50)(cid:3)(cid:35)(cid:54)(cid:33)(cid:35)(cid:35)(cid:34)(cid:39)(cid:44)(cid:37)(cid:3) manufactured by Senju Metal Industry Co., LTD for any 0.2wt%). Internal tests of this product. (cid:70)(cid:3)(cid:27)(cid:31)(cid:50)(cid:35)(cid:48)(cid:81)(cid:49)(cid:45)(cid:42)(cid:51)(cid:32)(cid:42)(cid:35)(cid:3)(cid:114)(cid:51)(cid:54) (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning Less than 5 minutes Less than 1 minute at room temp. 20W/L Frequency 2-propanol or of several 10kHz Less than 2 minutes to 100kHz. at 40˚C max. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. This product is for reflow soldering only. Flow soldering should not be allowed. (1) Printing Conditions of Solder Paste (a) Standard thickness of solder paste printing should be from 0.10 to 0.15 mm. E (b) After soldering, the solder fillet should be a height T from 0.15 mm to the thickness of this product (see the figure at right). Electrode Solder (c) Too much solder gives too strong mechanical stress Solder to this product. Such stress may cause cracking or 0.15mm <= T <= E other mechanical damage. Also, it can destroy the electrical performance of this product. Continued on the following page. 91

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Continued from the preceding page. (2) Allowable Soldering Temperature and Time (a) Solder within the temperature and time Allowable Reflow Soldering Temp. and Time combinations, indicated by the slanted lines in the 280 graphs at right. (b) The excessive soldering conditions may cause 270 dissolution of metallization or deterioration of 260 C) solder-wetting on the external electrode. e (°250 (c) In case of repeated soldering, the accumulated atur soldering time should be within the range shown per240 m below figure. ( For example, Reflow peak temperature: Te230 260°C, twice –> The accumulated soldering time at 220 260°C is within 30 sec. ) 210 0 102030405060708090100110 Time (sec.) (3) Standard Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on Reflow Soldering Conditions ceramic body. Difference between preheating temperature and maximum temperature in the Gradual cooling Preheating (in air) Soldering (in air) profile should be 100°C. C) (b) Rapid cooling by dipping in solvent or by other ure (°200 250°C means is not recommended. erat p m100 e T 0 1 to 2 min. *20 sec. Preheating: 150±10°C, 1 to 2 minutes Soldering: 250°C, 20 seconds * In case of repeated soldering, the accumulated soldering time should be within the range shown above figure (2). (4) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process, caused by the mounting conditions. Please make sure that this product is correctly mounted under specified mounting conditions. 92

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Soldering and Mounting) PRF18/21 Series 1. Solder and Flux (1) Solder Paste (2) Flux (a) Flow Soldering: Use Sn:Pb=60:40wt%, Use rosin type flux in the soldering process. Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or If the flux below is used, some problems might be equivalent type of solder. caused in the product characteristics and reliability. (b) Reflow Soldering: Use Sn:Pb=60:40wt%, Please do not use these types of flux. Sn:Pb=63:37wt%, Sn:Ag:Cu=96.5:3.0:0.5wt% or (cid:70)(cid:3)(cid:23)(cid:50)(cid:48)(cid:45)(cid:44)(cid:37)(cid:3)(cid:31)(cid:33)(cid:39)(cid:34)(cid:39)(cid:33)(cid:3)(cid:114)(cid:51)(cid:54)(cid:3)(cid:72)(cid:53)(cid:39)(cid:50)(cid:38)(cid:3)(cid:38)(cid:31)(cid:42)(cid:39)(cid:34)(cid:35)(cid:3)(cid:33)(cid:45)(cid:44)(cid:50)(cid:35)(cid:44)(cid:50)(cid:3)(cid:35)(cid:54)(cid:33)(cid:35)(cid:35)(cid:34)(cid:39)(cid:44)(cid:37)(cid:3) equivalent type of solder paste. 0.2wt%). For your reference, we are using "63Sn/37Pb (cid:70)(cid:3)(cid:27)(cid:31)(cid:50)(cid:35)(cid:48)(cid:81)(cid:49)(cid:45)(cid:42)(cid:51)(cid:32)(cid:42)(cid:35)(cid:3)(cid:114)(cid:51)(cid:54) RMA9086 90-3-M18," manufactured by Alpha (*Water-soluble flux can be defined as non-rosin type Metals Japan Ltd., "96.5Sn/3.0Ag/0.5Cu flux including wash-type flux and non-wash-type flux.) M705-GRN360-K2-V," manufactured by Senju Metal Industry Co., Ltd. for any internal tests of this product. 2. Cleaning Conditions and Drying To remove the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change to the external electrodes' quality. (1) Cleaning Conditions Solvent Dipping Cleaning Ultrasonic Cleaning Less than 5 minutes Less than 1 minute at room temp. 20W/L Frequency 2-propanol or of several 10kHz Less than 2 minutes to 100kHz. at 40˚C max. A sufficient cleaning should be applied to remove flux completely. (2) Drying After cleaning, promptly dry this product. 3. Soldering Conditions In your mounting process, observe the following points in order to avoid deterioration of the characteristics or destruction of this product. The mounting quality of this product may also be affected by the mounting conditions, shown in the points below. (1) Printing Conditions of Solder Paste (a) Recommended thickness of solder paste printing should be from 0.15 to 0.20mm. (b) After soldering, the solder fillet should be a height E from 0.2 mm to the thickness of this product (see T the figure at right). (c) Too much solder result in excessive mechanical Electrode Solder stress on this product. Such stress may cause Solder < < cracking or other mechanical damage. Also, it can 0.2mm = T = E destroy the electrical performance of this product. Continued on the following page. 93

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Continued from the preceding page. (2) Adhesive Application and Curing (3) Allowable Soldering Temperature and Time (a) If insufficient adhesive is applied, or if the adhesive (a) Solder within the temperature and time is not sufficiently hardened, this product may have a combinations, indicated by the slanted lines in the loose contact with the land, during flow soldering. following graphs. (b) Too low viscosity of adhesive causes this product to (b) Excessive soldering conditions may cause slip on the board, after mounting. dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In the case of repeated soldering, the accumulated soldering time should be within the range shown in the figures below. (For example, Reflow peak temperature: 260°C, twice –> The accumulated soldering time at 260°C is within 30sec.) Allowable Flow Soldering Temp. and Time Allowable Reflow Soldering Temp. and Time 270 280 260 270 C)250 C)260 ure (°240 ure (°250 at at er230 er240 p p m m Te220 Te230 210 220 200 210 0 10 20 30 0 102030405060708090100110 Time (sec.) Time (sec.) (4) Recommendable Temperature Profile for Soldering (a) Insufficient preheating may cause a crack on the ceramic body. The difference between preheating temperature and maximum temperature in the profile should be 100°C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. Flow Soldering Conditions Reflow Soldering Conditions Gradual cooling Gradual cooling Preheating (in air) Soldering Preheating (in air) Soldering (in air) (in air) C) C) e (°200 250°C e (°200 250°C ur ur at at er er p p m100 m100 e e T T 0 0 1 to 2 min. *3 sec. 1 to 2 min. *20 sec. Preheating: 150±10°C, 1-2 minutes. Preheating: 150±10°C, 1-2 minutes. Soldering: 250°C, 3 sec. Soldering: 250°C, 20 sec. * In the case of repeated soldering, the accumulated soldering * In the case of repeated soldering, the accumulated soldering time should be within the range shown in "(3) Allowable time should be within the range shown in "(3) Allowable Soldering Temperature and Time." Soldering Temperature and Time." (5) There may be a risk of unexpected failures (tombstone, insufficient solder-wetting, etc.) in the mounting process caused by mounting conditions. Please make sure that this product is correctly mounted under the specified mounting conditions. 94

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 !Caution/Notice Notice (Handling) PTGL Series 1. Do not apply an excessive force to the lead. 3. When this product is operated, the temperature of Otherwise, it may cause the junction between lead some areas may be over 100 to 160°C. Be sure that and element to break, or may crack the element. surrounding parts and inserting material can withstand Therefore, holding the element side lead wire is the temperature. If the surrounding part and material recommended when lead wire is bent or cut. are kept under such conditions, they may deteriorate or 2. This product does not have waterproof construction. produce harmful gas (Chlorine gas, Hydrogen sulfide gas, Splashed water may cause failure mode such as Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.), and decline of characteristics or current leak. such harmful gas may deteriorate the element. Notice (Handling) PTFL/PTFM Series 1. Do not apply an excessive force to the lead. Otherwise, it may cause the junction between lead and element to break, or may crack the element. Therefore, holding the element side lead wire is recommended when lead wire is bent or cut. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as decline of characteristics or current leak. Notice (Handling) PRG/PRF Series 1. When this product is operated, the temperature of some 2. Do not assemble this product with air-sealing or resin area may be over 100 to 150°C. Be sure that surrounding casting. Such sealing may deteriorate element. parts and inserting material can withstand the temperature. If the surrounding parts and material are kept under such conditions, they may deteriorate or produce harmful gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.), and such harmful gas may deteriorate the element. 95

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Chip Type PRG/PRF Series Package Minimum Quantity Guide Quantity (pcs.) Part Number Paper Tape Embossed Tape PR*15_RC 10,000 - PR*18_RB 4,000 - PR*21_RA - 4,000 PR*21_RK - 3,000 Tape Dimensions PR*15_RC Series: Paper Tape PR*18_RB Series: Paper Tape 1 1 ±0. 2.0±0.1 ±0. 2.0±0.054.0±0.1 ø1.5+-00.1 1.75 0.8 max. 4.0±0.1 4.0±0.1 ø1.5+-00.11.75 1.1 max. *1.15 3.5±0.1 8.0±0.3 (1.85) 3.5±0.05 8.0±0.3 *0.65 * Reference Value *1.05 * Reference Value Direction of feed Direction feed PR*21_RA Series: Embossed Tape PR*21_RK Series: Embossed Tape 1 1 2.0±0.1 ±0. 1.1 2.0±0.1 ±0. 1.30±0.05 4.0±0.1 4.0±0.1 ø1.5+-00.1 1.75 0.2 4.0±0.1 4.0±0.1 ø1.5+-00.1 1.75 0.25±0.05 5 5 0 0 2.25 3.5±0. 8.0±0.3 25±0.1 3.5±0. 8.0±0.3 2. 1.45 1.45±0.1 ø1.0+-00.3 Direction feed ø1.0±0.1 Direction feed (in mm) Reel Dimensions Reel Dimensions 2.0±0.5 ø13.0±0.2 1 +0.0-0 6 ø ø21.0±0.8 9.0+1.0 -0 13.0±1.0 ø180+0 -1.5 (in mm) 96

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Lead Type PTGL/PTF Series Package Minimum Order Quantity (for Overcurrent Protection) Bulk Type Ammo Pack Taping Type Bulk Type Ammo Pack Taping Type Series Series Part Number Min. Qty. Part Number Min. Qty. Part Number Min. Qty. Part Number Min. Qty. PTGL04AS100K2B51B0 PTGL04AS100K2B51A0 PTGL07AR330M6A51B0 500 - - 140V Series PTGL04AS100K2N51B0 PTGL04AS100K2N51A0 PTGL13AR6R8M6C01B0 200 - - PTGL05AS3R9K2B51B0 PTGL05AS3R9K2B51A0 - - PTGL07BB220N0B52A0 Narrow 500 Current Band PTGL07AS2R7K2B51B0 PTGL07AS2R7K2B51A0 1,500 250V Series - - PTGL09AR390N0B52A0 1,000 30V series PTGL07AS1R8K2B51B0 PTGL07AS1R8K2B51A0 - - PTGL10BB120N0P52A0 PTGL09AS1R2K2B51B0 PTGL09AS1R2K2B51A0 PTGL05AR151H8P52B0 PTGL05AR151H8P52A0 1,000 PTGL12AS0R8K2B51B0 300 PTGL12AS0R8K2B51A0 PTGL05AR181M9N51B0 500 - - PTGL04AS100K3B51B0 PTGL04AS100K3B51A0 PTGL05AR121M9N51B0 - - PTGL05AS6R8K3B51B0 PTGL05AS6R8K3B51A0 PTGL07AR820M9A51B0 - - Narrow 500 Current Band PTGL07AS3R3K3B51B0 PTGL07AS3R3K3B51A0 1,500 PTGL07AR700H8B52B0 PTGL07AR700H8B52A0 1,000 51V series PTGL09AS2R2K3B51B0 PTGL09AS2R2K3B51A0 PTGL07AR560M9A51B0 300 - - PTGL12AS1R2K3B51B0 300 PTGL12AS1R2K3B51A0 265V Series PTGL09AR390M9C61B0 - - PTGL04AS220K4B51B0 PTGL04AS220K4B51A0 PTGL09AR250H8B52B0 PTGL09AR250H8B52A0 1,000 PTGL04AS220K4N51B0 PTGL04AS220K4N51A0 PTGL12AR270M9C01B0 - - 200 PTGL05AS100K4B51B0 PTGL05AS100K4B51A0 PTGL12AR150H8B72B0 - - Narrow 500 Current Band PTGL07AS5R6K4B51B0 PTGL07AS5R6K4B51A0 1,500 PTGL14AR180M9C01B0 - - 60V series PTGL07AS5R6K4N51B0 PTGL07AS5R6K4N51A0 PTGL13AR100H8B72B0 150 - - PTGL09AS3R3K4B51B0 PTGL09AS3R3K4B51A0 PTGL18AR6R0H8B72B0 100 - - PTGL12AS2R2K4B51B0 300 PTGL12AS2R2K4B51A0 PTGL04AS560K6B51B0 PTGL04AS560K6B51A0 Minimum Order Quantity (for Inrush Current Suppression) PTGL05AS270K6B51B0 PTGL05AS270K6B51A0 PTGL07AS121M0N51B0 500 PTGL07AS121M0N51A0 1,000 Narrow PTGL07AS150K6B51B0 500 PTGL07AS150K6B51A0 Less than 100μF PTGL07AS181M0N51B0 500 PTGL07AS181M0N51A0 1,000 Current Band 1,500 Series 140V series PTGL09AS120K6B51B0 PTGL09AS120K6B51A0 PTGL07AS201M0N51B0 500 PTGL07AS201M0N51A0 1,000 PTGL09AS7R6K6B51B0 PTGL09AS7R6K6B51A0 PTGL14AS470H0B02BZ 150 - - PTGL12AS4R7K6B51B0 300 PTGL12AS4R7K6B51A0 PTGL16AS330H0B02BZ 150 - - PTGL05AR1R0M1B51B0 PTGL05AR1R0M1B51A0 PTGL16AS470H0B02BZ 150 - - PTGL06AR0R8M1B51B0 PTGL06AR0R8M1B51A0 100μF or more PTGL16AS680H0B02BZ 150 - - Series 500 PTGL07ARR47M1B51B0 PTGL07ARR47M1B51A0 PTGL16AS101H0B02BZ 150 - - 2,000 16V Series PTGL09ARR33M1B51B0 PTGL09ARR33M1B51A0 PTGL20AS330H0D02BZ 100 - - PTGL10ARR27M1B51B0 PTGL10ARR27M1B51A0 PTGL20AS470H0D02BZ 100 - - PTGL12AR0R2M1B51B0 300 PTGL12AR0R2M1B51A0 PTGL14ARR15M1B51B0 - - Minimum Order Quantity (for Overheat Sensing) PTGL09BD4R7N2B51B0 PTGL09BD4R7N2B51A0 PTFL Series 400 - - 24V Series 500 1,500 PTF Series PTGL09BD3R3N2B51B0 PTGL09BD3R3N2B51A0 PTFM Series 200 - - PTGL07AR4R6H2B51B0 PTGL07AR4R6H2B51A0 500 1,500 30V Series PTGL09AR1R8H2B51B0 PTGL09AR1R8H2B51A0 PTGL13AR0R8H2B71B0 300 - - PTGL07BD330N3B51B0 PTGL07BD330N3B51A0 32V Series PTGL07BD220N3B51B0 500 PTGL07BD220N3B51A0 1,500 PTGL07BD150N3B51B0 PTGL07BD150N3B51A0 PTGL07AR220M3P51B0 PTGL07AR220M3P51A0 PTGL07AR8R2M3P51B0 PTGL07AR8R2M3P51A0 PTGL09AR150M3B51B0 500 PTGL09AR150M3B51A0 1,500 56V Series PTGL10AR3R9M3P51B0 PTGL10AR3R9M3P51A0 PTGL09AR4R7M3B51B0 PTGL09AR4R7M3B51A0 PTGL10AR3R9M3B51B0 PTGL10AR3R9M3B51A0 300 PTGL14AR3R3M3B71B0 - - PTGL05AR550H4P51B0 PTGL05AR550H4P51A0 80V Series PTGL07AR250H4B51B0 500 PTGL07AR250H4B51A0 1,500 PTGL09AR9R4H4B51B0 PTGL09AR9R4H4B51A0 PTGL05AR181M7P52B0 500 PTGL05AR181M7P52A0 1,500 125V Series PTGL14AR100M6B72B0 150 - - Continued on the following page. 97

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Lead Type PTGL/PTF Series Package Continued from the preceding page. Narrow Current Band 30 - 140V Series / 16 - 80V Series / Inrush Current Suppression Taping Dimensions P2 P ΔS Δh1 Δh2 D T e H2 W2 H0 L W1 W0 W P1 F dl øD0 P0 t1 t2 Item Code Dimensions (mm) Note Pitch of Component P 12.7 Tolerance is determined by ΔS. Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0+0.8 –0.3 Length from Hole Center to Lead P1 3.85±0.8 Length from Hole Center to Component Center P2 6.35±1.3 Deviation in the feeding direction Body Diameter D Please see in Ratings Body Thickness T Please see in Ratings Deviation along Tape, Left or Right Defect ΔS ±1.5 Including the inclination caused by lead bending Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0+–00..575 Deviation of tape width Lead Distance between Reference and H0 16.0±1.0 Bottom Planes H2 6.0 max. Protrusion Length I +0.5 to –1.0 Diameter of Sprocket Hole D0 4.0±0.2 Lead Diameter d Please see in Ratings Total Tape Thickness t1 0.6±0.3 Total Thickness of Tape and Lead Wire t2 2.0 max. Deviation across Tape Δh1, Δh2 1.5 max. Portion to cut in Case of Defect L 11.0+0 –2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 4.0 max. Coating Extension on Lead e Up to the center of crimp Continued on the following page. 98

!Note (cid:129) Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R90E.pdf (cid:129) This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug. 6,2018 Lead Type PTGL/PTF Series Package Continued from the preceding page. 125/250/265V Series Taping Dimensions P2 P ΔS Δh1 Δh2 D T e H2 W2 H0 L W1 W0 W P1 F dl øD0 P0 t1 t2 Item Code Dimensions (mm) Note Pitch of Component P 12.7 Tolerance is determined by ΔS. Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0+0.8 –0.3 Length from Hole Center to Lead P1 3.85±0.8 Length from Hole Center to Component Center P2 6.35±1.3 Deviation in the feeding direction Body Diameter D Please see Ratings Body Thickness T Please see Ratings Deviation along Tape, Left or Right ΔS ±1.5 Including the inclination caused by lead bending. Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0+–00..575 Deviation of tape width. Lead Distance between Reference and H0 16.0±1.0 Bottom Planes H2 6.0 max. Protrusion Length I +0.5 to -1.0 Diameter of Sprocket Hole D0 4.0±0.2 Lead Diameter d 0.6±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness of Tape and Lead Wire t2 2.0 max. Deviation across Tape Δh1, Δh2 1.5 max. Portion to cut in Case of Defect L 11.0+0 –2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 4.0 max. Coating Extension on Lead e Up to the center of crimp 99

R90E.pdf Aug. 6,2018 Cat. No. R90E-15 Global Locations For details please visit www.murata.com Note 1 Export Control 2 Please contact our sales representatives or 3 Product specifi cations in this catalog are as of product engineers before using the products in August 2018. They are subject to change or For customers outside Japan: this catalog for the applications listed below, our products in it may be discontinued without No Murata products should be used or which require especially high reliability for the advance notice. Please check with our sales sold, through any channels, for use in the prevention of defects which might directly representatives or product engineers before design, development, production, utilization, damage a third party’s life, body or property, or ordering. If there are any questions, please contact maintenance or operation of, or otherwise when one of our products is intended for use our sales representatives or product engineers. contribution to (1) any weapons (Weapons of in applications other than those specified in Mass Destruction [nuclear, chemical or biological this catalog. 4 Please read rating and CAUTION (for storage, weapons or missiles] or conventional weapons) operating, rating, soldering, mounting and or (2) goods or systems specially designed or 1 Aircraft equipment handling) in this catalog to prevent smoking intended for military end-use or utilization by 2 Aerospace equipment and/or burning, etc. military end-users. 3 Undersea equipment 5 This catalog has only typical specifi cations. For customers in Japan: Therefore, please approve our product 4 Power plant equipment specifi cations or transact the approval sheet For products which are controlled items subject for product specifi cations before ordering. to the “Foreign Exchange and Foreign Trade Law” 5 Medical equipment of Japan, the export license specifi ed by the law 6 Please note that unless otherwise specifi ed, we is required for export. 6 Transportation equipment (vehicles, trains, shall assume no responsibility whatsoever for any ships, etc.) confl ict or dispute that may occur in connection 7 Traffi c signal equipment with the eff ect of our and/or a third party’s intellectual property rights and other related 8 Disaster prevention / crime prevention rights in consideration of your use of our products equipment and/or information described or contained in our catalogs. In this connection, no representation 9 Data-processing equipment shall be made to the eff ect that any third parties are authorized to use the rights mentioned above 10 Application of similar complexity and/or under licenses without our consent. reliability requirements to the applications listed above 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. Murata Manufacturing Co., Ltd. www.murata.com