PNM www.vishay.com Vishay Dale Thin Film Precision Thin Film Non-Magnetic Resistor, Surface Mount Chip, ± 25 ppm/°C, Tolerances to 0.1 % FEATURES • Non-magnetic • Moisture resistant Actual Size • High purity alumina substrate Available 1505 • Non-standard values available These devices eliminate materials that would disturb Available • MIL-STD-202 method 106 moisture magnetic fields applications such as in MRI magnetic resistance with 10 % power resonance imaging machines. The PNM series chip resistor Available has been carefully engineered with non-magnetic materials • 100 % visual inspected per MIL-PRF-55342 to eliminate the effects of these stray magnetic fields on • Very low noise and voltage coefficient (< -30 dB) circuit performance, thereby resulting in simplified shielding • Non-inductive requirements and improved sound quality in audio • Laser-trimmed tolerances to ± 0.1 % applications. Providing signal conditioning without • Wraparound resistance less than 10 m distortion from magnetic fields. • Material categorization: for definitions of compliance CONSTRUCTION please see www.vishay.com/doc?99912 Tantalum Nitride Note Passivation Resistive Film * This datasheet provides information about parts that are Solder RoHS-compliant and / or parts that are non RoHS-compliant. For coating example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Barrier layer TYPICAL PERFORMANCE High Purity Alumina Substrate ABSOLUTE Adhesion layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10  to 3 M - TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C Stability: Absolute R ± 0.03 % - Stability: Ratio - - Voltage Coefficient 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Noise < -30 dB - Shelf Life Stability: Absolute - - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 20 to 35K 0502 100 75 20 to 65K 0505 150 75 20 to 130K 0603 150 75 10 to 130K 0805 200 100 10 to 301K 0705 200 100 10 to 301K 1005 250 100 10 to 301K 1010 500 150 50 to 600K 1206 400 200 10 to 1M 1505 400 150 10 to 1M 2208 750 150 10 to 1.75M 2010 800 200 10 to 2M 2512 1000 200 10 to 3M Note (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 13-Sep-2018 1 Document Number: 60057 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PNM www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE L W T D E 0402 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005 0502 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005 0505 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005 0603 0.064 ± 0.006 0.032 ± 0.005 0.020 Max. 0.012 ± 0.005 0.015 ± 0.005 0705, 0805 (1) 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1005 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1010 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1206 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 1505 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 2010 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2208 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2512 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements) LIMITS MIL-PRF-55342 TYPICAL VISHAY ENVIRONMENTAL TEST CHARACTERISTIC “H” PERFORMANCE Resistance Temperature Characteristic ± 50 ppm/°C ± 35 ppm/°C Max. Ambient Temperature at Rated Wattage +70 °C +70 °C Max. Ambient Temperature at Power Derating +150 °C +150 °C Thermal Shock R ± 0.25 % ± 0.040 % Low Temperature Operation R ± 0.25 % ± 0.005 % Short Time Overload R ± 0.10 % ± 0.010 % High Temperature Exposure R ± 0.20 % ± 0.150 % Resistance to Bonding Exposure R ± 0.25 % ± 0.005 % Moisture Resistance R ± 0.40 % ± 0.029 % Life + 70 °C at 1000 hours R ± 0.50 % ± 0.03 % Insulation Resistance 10 000  minimum > 100 000 M Revision: 13-Sep-2018 2 Document Number: 60057 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PNM www.vishay.com Vishay Dale Thin Film FILM LOAD LIFE STABILITY (at +125 °C) DERATING CURVE 0.1 % 100 0.06 % 00..0054 %% Maximum wer 80 0.03 % Absolute o P 0.02 % Change ed 60 0.01 % Rat 0.006 % of 40 00..000054 %% ent 0.003 % c er 20 0.002 % P 0.001 % 0 200 400 600 800 1000 1200 1400 1600 1800 2000 0 70 125 155 Time in h at + 125 °C Ambient Temperature °C GLOBAL PART NUMBER INFORMATION P N M 1 2 0 6 E 1 0 0 2 B B T 1 GLOBAL CASE TCR RESISTANCE TOLERANCE TERMINATION PACKAGING MODEL SIZE CHARACTERISTIC PNM 0402 E = 25 ppm The first 3 digits are B = ± 0.1 % (1) B = wraparound  BS = BULK non- 0502 (R > 100 ) significant figures D = ± 0.5 % Sn/Pb solder 100 min., 1 mult magnetic 0505 H = 50 ppm and the last digit F = ± 1 % 63 % Sn/ 37 % Pb  WS = WAFFLE resistor 0603 (R > 50 ) specifies the number G = ± 2 % S = wraparound  100 min., 1 mult 0805 K = 100 ppm of zeros to follow. J = ± 5 % lead (Pb)-free solder  1005 (R > 10 ) “R” designates the 96.5 % Sn/3.0 % Ag/ TAPE AND REEL 1010 decimal point. 0.5 % Cu T0 = 100 min., 100 mult 1206  RoHS compliant - e1 T1 = 1000 min., 1000 mult (2) 1505 Example: T3 = 300 min., 300 mult 2208 10R0 = 10  T5 = 500 min., 500 mult 2010 1000 = 100  TF = Full reel 2512 1001 = 1 k TS = 100 min., 1 mult Notes (1) B = 0.1 % tolerance available only above 100  (2) Preferred packaging code Revision: 13-Sep-2018 3 Document Number: 60057 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000