PIC16F627A/628A/648A Data Sheet Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology © 2009 Microchip Technology Inc. DS40044G

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, dsPIC, and may be superseded by updates. It is your responsibility to KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. rfPIC and UNI/O are registered trademarks of Microchip MICROCHIP MAKES NO REPRESENTATIONS OR Technology Incorporated in the U.S.A. and other countries. WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, OTHERWISE, RELATED TO THE INFORMATION, MXDEV, MXLAB, SEEVAL and The Embedded Control INCLUDING BUT NOT LIMITED TO ITS CONDITION, Solutions Company are registered trademarks of Microchip QUALITY, PERFORMANCE, MERCHANTABILITY OR Technology Incorporated in the U.S.A. FITNESS FOR PURPOSE. Microchip disclaims all liability Analog-for-the-Digital Age, Application Maestro, CodeGuard, arising from this information and its use. Use of Microchip dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, devices in life support and/or safety applications is entirely at ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial the buyer’s risk, and the buyer agrees to defend, indemnify and Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified hold harmless Microchip from any and all damages, claims, logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code suits, or expenses resulting from such use. No licenses are Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, conveyed, implicitly or otherwise, under any Microchip PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total intellectual property rights. Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2009, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS40044G-page 2 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 18-pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology High-Performance RISC CPU: Low-Power Features: • Operating speeds from DC – 20MHz • Standby Current: • Interrupt capability - 100nA @ 2.0V, typical • 8-level deep hardware stack • Operating Current: • Direct, Indirect and Relative Addressing modes - 12μA @ 32kHz, 2.0V, typical • 35 single-word instructions: - 120μA @ 1MHz, 2.0V, typical - All instructions single cycle except branches • Watchdog Timer Current: - 1μA @ 2.0V, typical Special Microcontroller Features: • Timer1 Oscillator Current: • Internal and external oscillator options: - 1.2μA @ 32kHz, 2.0V, typical • Dual-speed Internal Oscillator: - Precision internal 4MHz oscillator factory calibrated to ±1% - Run-time selectable between 4MHz and 48kHz - Low-power internal 48kHz oscillator - External Oscillator support for crystals and - 4μs wake-up from Sleep, 3.0V, typical resonators Peripheral Features: • Power-saving Sleep mode • Programmable weak pull-ups on PORTB • 16 I/O pins with individual direction control • Multiplexed Master Clear/Input-pin • High current sink/source for direct LED drive • Watchdog Timer with independent oscillator for • Analog comparator module with: reliable operation - Two analog comparators • Low-voltage programming - Programmable on-chip voltage reference • In-Circuit Serial Programming™ (via two pins) (VREF) module • Programmable code protection - Selectable internal or external reference • Brown-out Reset - Comparator outputs are externally accessible • Power-on Reset • Timer0: 8-bit timer/counter with 8-bit • Power-up Timer and Oscillator Start-up Timer programmable prescaler • Wide operating voltage range (2.0-5.5V) • Timer1: 16-bit timer/counter with external crystal/ • Industrial and extended temperature range clock capability • High-Endurance Flash/EEPROM cell: • Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler - 100,000 write Flash endurance • Capture, Compare, PWM module: - 1,000,000 write EEPROM endurance - 16-bit Capture/Compare - 40 year data retention - 10-bit PWM • Addressable Universal Synchronous/Asynchronous Receiver/Transmitter USART/SCI Program Data Memory Memory CCP Timers Device I/O USART Comparators Flash SRAM EEPROM (PWM) 8/16-bit (words) (bytes) (bytes) PIC16F627A 1024 224 128 16 1 Y 2 2/1 PIC16F628A 2048 224 128 16 1 Y 2 2/1 PIC16F648A 4096 256 256 16 1 Y 2 2/1 © 2009 Microchip Technology Inc. DS40044G-page 3

PIC16F627A/628A/648A Pin Diagrams PDIP, SOIC RA2/AN2/VREF 1 18 RA1/AN1 RA3/AN3/CMP1 2 2 17 RA0/AN0 RA4/T0CKI/CMP2 3 7A/62648A 16 RA7/OSC1/CLKIN RA5/MCLR/VPP 4 8A/628A/ 15 RA6/OSC2/CLKOUT VSS 5 48A7A/6 14 VDD RB0/INT 6 62 13 RB7/T1OSI/PGD F 6 RB1/RX/DT 7 C1 12 RB6/T1OSO/T1CKI/PGC PI RB2/TX/CK 8 11 RB5 RB3/CCP1 9 10 RB4/PGM SSOP 28-Pin QFN C G LKINLKOUT GDT1CKI/P A1/AN1A0/AN0A7/OSC1/CA6/OSC2/CDDDDB7/T1OSI/PB6/T1OSO/B5B4/PGM 0CKI/CMP2N3/CMP1N2/VREF N1N0 RRRRVVRRRR TAA AA 4/3/2/ 1/0/ AAA AA RRR RR C C 20191817161514131211 N N 8765432 RA5/MCLR/VPP 1222222221 RA7/OSC1/CLKIN PIC16F627A/628A/648A NC 2 20 RA6/OSC2/CLKOUT VSS 3 19 VDD NC 4 PIC16F627A/628A18 NC 1 2 3 4 5 6 7 8 910 VSS 5 PIC16F648A 17 VDD NC 6 16 RB7/T1OSI/PGD RB0/INT 7 15 RB6/T1OSO/T1CKI/PGC 891011121314 F12PSSTTK1 RA2/AN2/VRERA3/AN3/CMPRA4/T0CKI/CMPRA5/MCLR/VPVSVSRB0/INRB1/RX/DRB2/TX/CRB3/CCP RB1/RX/DTRB2/TX/CKRB3/CCP1NC RB4/PGMRB5NC DS40044G-page 4 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A Table of Contents 1.0 General Description........................................................................................................................................................................ 7 2.0 PIC16F627A/628A/648A Device Varieties...................................................................................................................................... 9 3.0 Architectural Overview.................................................................................................................................................................. 11 4.0 Memory Organization ....................................................................................................................................................................17 5.0 I/O Ports........................................................................................................................................................................................ 33 6.0 Timer0 Module ..............................................................................................................................................................................47 7.0 Timer1 Module ..............................................................................................................................................................................50 8.0 Timer2 Module.............................................................................................................................................................................. 54 9.0 Capture/Compare/PWM (CCP) Module........................................................................................................................................ 57 10.0 Comparator Module.................................................................................................................................................................... 63 11.0 Voltage Reference Module......................................................................................................................................................... 69 12.0 Universal Synchronous Asynchronous Receiver Transmitter (USART) Module......................................................................... 73 13.0 Data EEPROM Memory ..............................................................................................................................................................91 14.0 Special Features of the CPU...................................................................................................................................................... 97 15.0 Instruction Set Summary........................................................................................................................................................... 117 16.0 Development Support ...............................................................................................................................................................131 17.0 Electrical Specifications ............................................................................................................................................................135 18.0 DC and AC Characteristics Graphs and Tables....................................................................................................................... 151 19.0 Packaging Information.............................................................................................................................................................. 163 Appendix A: Data Sheet Revision History......................................................................................................................................... 171 Appendix B: Device Differences....................................................................................................................................................... 171 Appendix C: Device Migrations......................................................................................................................................................... 172 Appendix D: Migrating from other PIC® Devices.............................................................................................................................. 172 The Microchip Web Site ....................................................................................................................................................................173 Customer Change Notification Service............................................................................................................................................. 173 Customer Support............................................................................................................................................................................. 173 Reader Response............................................................................................................................................................................. 174 Product Identification System........................................................................................................................................................... 179 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Micro- chip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000). Errata An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: • Microchip’s Worldwide Web site; http://www.microchip.com • Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are using. Customer Notification System Register on our web site at www.microchip.com to receive the most current information on all of our products. © 2009 Microchip Technology Inc. DS40044G-page 5

PIC16F627A/628A/648A NOTES: DS40044G-page 6 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 1.0 GENERAL DESCRIPTION The HS mode is for High-Speed crystals. The EC mode is for an external clock source. The PIC16F627A/628A/648A are 18-pin Flash-based The Sleep (Power-down) mode offers power savings. members of the versatile PIC16F627A/628A/648A Users can wake-up the chip from Sleep through several family of low-cost, high-performance, CMOS, fully- external interrupts, internal interrupts and Resets. static, 8-bit microcontrollers. All PIC® microcontrollers employ an advanced RISC A highly reliable Watchdog Timer with its own on-chip RC oscillator provides protection against software lock- architecture. The PIC16F627A/628A/648A have up. enhanced core features, an eight-level deep stack, and multiple internal and external interrupt sources. The Table1-1 shows the features of the PIC16F627A/628A/ separate instruction and data buses of the Harvard 648A mid-range microcontroller family. architecture allow a 14-bit wide instruction word with A simplified block diagram of the PIC16F627A/628A/ the separate 8-bit wide data. The two-stage instruction 648A is shown in Figure3-1. pipeline allows all instructions to execute in a single- The PIC16F627A/628A/648A series fits in applications cycle, except for program branches (which require two ranging from battery chargers to low power remote cycles). A total of 35 instructions (reduced instruction sensors. The Flash technology makes customizing set) are available, complemented by a large register application programs (detection levels, pulse genera- set. tion, timers, etc.) extremely fast and convenient. The PIC16F627A/628A/648A microcontrollers typically small footprint packages makes this microcontroller achieve a 2:1 code compression and a 4:1 speed series ideal for all applications with space limitations. improvement over other 8-bit microcontrollers in their Low cost, low power, high performance, ease of use class. and I/O flexibility make the PIC16F627A/628A/648A PIC16F627A/628A/648A devices have integrated very versatile. features to reduce external components, thus reducing 1.1 Development Support system cost, enhancing system reliability and reducing power consumption. The PIC16F627A/628A/648A family is supported by a full-featured macro assembler, a software simulator, an The PIC16F627A/628A/648A has 8 oscillator in-circuit emulator, a low cost in-circuit debugger, a low configurations. The single-pin RC oscillator provides a cost development programmer and a full-featured low-cost solution. The LP oscillator minimizes power programmer. A Third Party “C” compiler support tool is consumption, XT is a standard crystal, and INTOSC is also available. a self-contained precision two-speed internal oscillator. TABLE 1-1: PIC16F627A/628A/648A FAMILY OF DEVICES PIC16F627A PIC16F628A PIC16F648A PIC16LF627A PIC16LF628A PIC16LF648A Clock Maximum Frequency 20 20 20 20 20 20 of Operation (MHz) Flash Program 1024 2048 4096 1024 2048 4096 Memory (words) Memory RAM Data Memory 224 224 256 224 224 256 (bytes) EEPROM Data 128 128 256 128 128 256 Memory (bytes) Timer module(s) TMR0, TMR1, TMR0, TMR1, TMR0, TMR1, TMR0, TMR1, TMR0, TMR1, TMR0, TMR1, TMR2 TMR2 TMR2 TMR2 TMR2 TMR2 Comparator(s) 2 2 2 2 2 2 Peripherals Capture/Compare/ 1 1 1 1 1 1 PWM modules Serial Communications USART USART USART USART USART USART Internal Voltage Yes Yes Yes Yes Yes Yes Reference Interrupt Sources 10 10 10 10 10 10 I/O Pins 16 16 16 16 16 16 Features Voltage Range (Volts) 3.0-5.5 3.0-5.5 3.0-5.5 2.0-5.5 2.0-5.5 2.0-5.5 Brown-out Reset Yes Yes Yes Yes Yes Yes Packages 18-pin DIP, 18-pin DIP, 18-pin DIP, 18-pin DIP, 18-pin DIP, 18-pin DIP, SOIC, 20-pin SOIC, 20-pin SOIC, 20-pin SOIC, 20-pin SOIC, 20-pin SOIC, 20-pin SSOP, SSOP, SSOP, SSOP, SSOP, SSOP, 28-pin QFN 28-pin QFN 28-pin QFN 28-pin QFN 28-pin QFN 28-pin QFN All PIC® family devices have Power-on Reset, selectable Watchdog Timer, selectable code-protect and high I/O current capability. All PIC16F627A/628A/648A family devices use serial programming with clock pin RB6 and data pin RB7. © 2009 Microchip Technology Inc. DS40044G-page 7

PIC16F627A/628A/648A NOTES: DS40044G-page 8 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 2.0 PIC16F627A/628A/648A DEVICE VARIETIES A variety of frequency ranges and packaging options are available. Depending on application and production requirements, the proper device option can be selected using the information in the PIC16F627A/628A/648A Product Identification System, at the end of this data sheet. When placing orders, please use this page of the data sheet to specify the correct part number. 2.1 Flash Devices Flash devices can be erased and re-programmed electrically. This allows the same device to be used for prototype development, pilot programs and production. A further advantage of the electrically erasable Flash is that it can be erased and reprogrammed in-circuit, or by device programmers, such as Microchip’s PICSTART® Plus or PRO MATE® II programmers. 2.2 Quick-Turnaround-Production (QTP) Devices Microchip offers a QTP Programming Service for factory production orders. This service is made available for users who chose not to program a medium to high quantity of units and whose code patterns have stabilized. The devices are standard Flash devices, but with all program locations and configuration options already programmed by the factory. Certain code and prototype verification procedures apply before production shipments are available. Please contact your Microchip Technology sales office for more details. 2.3 Serialized Quick-Turnaround- Production (SQTPSM) Devices Microchip offers a unique programming service where a few user-defined locations in each device are programmed with different serial numbers. The serial numbers may be random, pseudo-random or sequential. Serial programming allows each device to have a unique number, which can serve as an entry-code, password or ID number. © 2009 Microchip Technology Inc. DS40044G-page 9

PIC16F627A/628A/648A NOTES: DS40044G-page 10 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 3.0 ARCHITECTURAL OVERVIEW The PIC16F627A/628A/648A can directly or indirectly address its register files or data memory. All Special The high performance of the PIC16F627A/628A/648A Function Registers (SFR), including the program family can be attributed to a number of architectural counter, are mapped in the data memory. The features commonly found in RISC microprocessors. To PIC16F627A/628A/648A have an orthogonal (symmet- begin with, the PIC16F627A/628A/648A uses a rical) instruction set that makes it possible to carry out Harvard architecture in which program and data are any operation, on any register, using any addressing accessed from separate memories using separate mode. This symmetrical nature and lack of ‘special busses. This improves bandwidth over traditional Von optimal situations’ makes programming with the Neumann architecture where program and data are PIC16F627A/628A/648A simple yet efficient. In fetched from the same memory. Separating program addition, the learning curve is reduced significantly. and data memory further allows instructions to be sized The PIC16F627A/628A/648A devices contain an 8-bit differently than 8-bit wide data word. Instruction ALU and working register. The ALU is a general opcodes are 14-bits wide making it possible to have all purpose arithmetic unit. It performs arithmetic and single-word instructions. A 14-bit wide program mem- Boolean functions between data in the working register ory access bus fetches a 14-bit instruction in a single and any register file. cycle. A two-stage pipeline overlaps fetch and execu- tion of instructions. Consequently, all instructions (35) The ALU is 8-bits wide and capable of addition, execute in a single-cycle (200ns @ 20MHz) except for subtraction, shift and logical operations. Unless program branches. otherwise mentioned, arithmetic operations are two’s complement in nature. In two-operand instructions, Table3-1 lists device memory sizes (Flash, Data and typically one operand is the working register EEPROM). (Wregister). The other operand is a file register or an immediate constant. In single operand instructions, the TABLE 3-1: DEVICE MEMORY LIST operand is either the W register or a file register. Memory The W register is an 8-bit working register used for ALU Device operations. It is not an addressable register. Flash RAM EEPROM Program Data Data Depending on the instruction executed, the ALU may affect the values of the Carry (C), Digit Carry (DC), and PIC16F627A 1024 x 14 224 x 8 128 x 8 Zero (Z) bits in the Status Register. The C and DC bits PIC16F628A 2048 x 14 224 x 8 128 x 8 operate as Borrow and Digit Borrow out bits, PIC16F648A 4096 x 14 256 x 8 256 x 8 respectively, in subtraction. See the SUBLW and SUBWF PIC16LF627A 1024 x 14 224 x 8 128 x 8 instructions for examples. PIC16LF628A 2048 x 14 224 x 8 128 x 8 A simplified block diagram is shown in Figure3-1, and PIC16LF648A 4096 x 14 256 x 8 256 x 8 a description of the device pins in Table3-2. Two types of data memory are provided on the PIC16F627A/628A/648A devices. Nonvolatile EEPROM data memory is provided for long term storage of data, such as calibration values, look-up table data, and any other data which may require periodic updating in the field. These data types are not lost when power is removed. The other data memory provided is regular RAM data memory. Regular RAM data memory is provided for temporary storage of data during normal operation. Data is lost when power is removed. © 2009 Microchip Technology Inc. DS40044G-page 11

PIC16F627A/628A/648A FIGURE 3-1: BLOCK DIAGRAM 13 Data Bus 8 Program Counter Flash Program Memory RAM 8-Level Stack File (13-bit) Registers Program Bus 14 RAM Addr (1) 9 PORTA Addr MUX RA0/AN0 Instruction Reg RA1/AN1 Direct Addr 7 8 InAddirderct RA2/AN2/VREF RA3/AN3/CMP1 FSR Reg RA4/T0CK1/CMP2 RA5/MCLR/VPP Status Reg RA6/OSC2/CLKOUT 8 RA7/OSC1/CLKIN Power-up 3 MUX PORTB Timer RB0/INT RB1/RX/DT Instruction Oscillator Decode & Start-up Timer RB2/TX/CK Control ALU RB3/CCP1 PoRweesre-ton 8 RB4/PGM RB5 GeTnimeriantgion WaTticmhedrog W Reg RB6/T1OSO/T1CKI/PGC RB7/T1OSI/PGD OSC1/CLKIN Brown-out OSC2/CLKOUT Reset Low-Voltage Programming MCLR VDD, VSS Comparator Timer0 Timer1 Timer2 VREF CCP1 USART Data EEPROM Note 1: Higher order bits are from the Status register. DS40044G-page 12 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 3-2: PIC16F627A/628A/648A PINOUT DESCRIPTION Name Function Input Type Output Type Description RA0/AN0 RA0 ST CMOS Bidirectional I/O port AN0 AN — Analog comparator input RA1/AN1 RA1 ST CMOS Bidirectional I/O port AN1 AN — Analog comparator input RA2/AN2/VREF RA2 ST CMOS Bidirectional I/O port AN2 AN — Analog comparator input VREF — AN VREF output RA3/AN3/CMP1 RA3 ST CMOS Bidirectional I/O port AN3 AN — Analog comparator input CMP1 — CMOS Comparator 1 output RA4/T0CKI/CMP2 RA4 ST OD Bidirectional I/O port T0CKI ST — Timer0 clock input CMP2 — OD Comparator 2 output RA5/MCLR/VPP RA5 ST — Input port MCLR ST — Master clear. When configured as MCLR, this pin is an active low Reset to the device. Voltage on MCLR/VPP must not exceed VDD during normal device operation. VPP — — Programming voltage input RA6/OSC2/CLKOUT RA6 ST CMOS Bidirectional I/O port OSC2 — XTAL Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator mode. CLKOUT — CMOS In RC/INTOSC mode, OSC2 pin can output CLKOUT, which has 1/4 the frequency of OSC1. RA7/OSC1/CLKIN RA7 ST CMOS Bidirectional I/O port OSC1 XTAL — Oscillator crystal input CLKIN ST — External clock source input. RC biasing pin. RB0/INT RB0 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. INT ST — External interrupt RB1/RX/DT RB1 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. RX ST — USART receive pin DT ST CMOS Synchronous data I/O RB2/TX/CK RB2 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. TX — CMOS USART transmit pin CK ST CMOS Synchronous clock I/O RB3/CCP1 RB3 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. CCP1 ST CMOS Capture/Compare/PWM I/O Legend: O = Output CMOS = CMOS Output P = Power — = Not used I = Input ST = Schmitt Trigger Input TTL = TTL Input OD = Open Drain Output AN = Analog © 2009 Microchip Technology Inc. DS40044G-page 13

PIC16F627A/628A/648A TABLE 3-2: PIC16F627A/628A/648A PINOUT DESCRIPTION (CONTINUED) Name Function Input Type Output Type Description RB4/PGM RB4 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. PGM ST — Low-voltage programming input pin. When low-voltage programming is enabled, the interrupt-on-pin change and weak pull-up resistor are disabled. RB5 RB5 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. RB6/T1OSO/T1CKI/PGC RB6 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. T1OSO — XTAL Timer1 oscillator output T1CKI ST — Timer1 clock input PGC ST — ICSP™ programming clock RB7/T1OSI/PGD RB7 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. T1OSI XTAL — Timer1 oscillator input PGD ST CMOS ICSP data I/O VSS VSS Power — Ground reference for logic and I/O pins VDD VDD Power — Positive supply for logic and I/O pins Legend: O = Output CMOS = CMOS Output P = Power — = Not used I = Input ST = Schmitt Trigger Input TTL = TTL Input OD = Open Drain Output AN = Analog DS40044G-page 14 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 3.1 Clocking Scheme/Instruction 3.2 Instruction Flow/Pipelining Cycle An instruction cycle consists of four Q cycles (Q1, Q2, The clock input (RA7/OSC1/CLKIN pin) is internally Q3 and Q4). The instruction fetch and execute are divided by four to generate four non-overlapping pipelined such that fetch takes one instruction cycle quadrature clocks namely Q1, Q2, Q3 and Q4. while decode and execute takes another instruction Internally, the Program Counter (PC) is incremented cycle. However, due to the pipelining, each instruction every Q1, the instruction is fetched from the program effectively executes in one cycle. If an instruction memory and latched into the instruction register in Q4. causes the program counter to change (e.g., GOTO) The instruction is decoded and executed during the then two cycles are required to complete the instruction following Q1 through Q4. The clocks and instruction (Example3-1). execution flow is shown in Figure3-2. A fetch cycle begins with the program counter incrementing in Q1. In the execution cycle, the fetched instruction is latched into the Instruction Register (IR) in cycle Q1. This instruction is then decoded and executed during the Q2, Q3 and Q4 cycles. Data memory is read during Q2 (operand read) and written during Q4 (destination write). FIGURE 3-2: CLOCK/INSTRUCTION CYCLE Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 Q1 Q2 Internal phase Q3 clock Q4 PC PC PC + 1 PC + 2 CLKOUT Fetch INST (PC) Execute INST (PC - 1) Fetch INST (PC + 1) Execute INST (PC) Fetch INST (PC + 2) Execute INST (PC + 1) EXAMPLE 3-1: INSTRUCTION PIPELINE FLOW 1. MOVLW 55h Fetch 1 Execute 1 2. MOVWF PORTB Fetch 2 Execute 2 3. CALL SUB_1 Fetch 3 Execute 3 4. BSF PORTA, 3 Fetch 4 Flush Fetch SUB_1 Execute SUB_1 Note: All instructions are single cycle except for any program branches. These take two cycles since the fetch instruction is “flushed” from the pipeline while the new instruction is being fetched and then executed. © 2009 Microchip Technology Inc. DS40044G-page 15

PIC16F627A/628A/648A NOTES: DS40044G-page 16 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 4.0 MEMORY ORGANIZATION 4.2 Data Memory Organization The data memory (Figure4-2 and Figure4-3) is 4.1 Program Memory Organization partitioned into four banks, which contain the General Purpose Registers (GPRs) and the Special Function The PIC16F627A/628A/648A has a 13-bit program Registers (SFRs). The SFRs are located in the first 32 counter capable of addressing an 8Kx14 program locations of each bank. There are General Purpose memory space. Only the first 1Kx 14 (0000h-03FFh) Registers implemented as static RAM in each bank. for the PIC16F627A, 2Kx14 (0000h-07FFh) for the Table4-1 lists the General Purpose Register available PIC16F628A and 4Kx14 (0000h-0FFFh) for the in each of the four banks. PIC16F648A are physically implemented. Accessing a location above these boundaries will cause a wrap- TABLE 4-1: GENERAL PURPOSE STATIC around within the first 1K x14 space (PIC16F627A), 2Kx14 space (PIC16F628A) or 4Kx14 space RAM REGISTERS (PIC16F648A). The Reset vector is at 0000h and the PIC16F627A/628A PIC16F648A interrupt vector is at 0004h (Figure4-1). Bank0 20-7Fh 20-7Fh FIGURE 4-1: PROGRAM MEMORY MAP Bank1 A0h-FF A0h-FF AND STACK Bank2 120h-14Fh, 170h-17Fh 120h-17Fh PC<12:0> Bank3 1F0h-1FFh 1F0h-1FFh CALL, RETURN 13 Addresses F0h-FFh, 170h-17Fh and 1F0h-1FFh are RETFIE, RETLW implemented as common RAM and mapped back to addresses 70h-7Fh. Stack Level 1 Table4-2 lists how to access the four banks of registers Stack Level 2 via the Status register bits RP1 and RP0. Stack Level 8 TABLE 4-2: ACCESS TO BANKS OF REGISTERS Reset Vector 000h Bank RP1 RP0 0 0 0 1 0 1 Interrupt Vector 0004 2 1 0 On-chip Program 0005 3 1 1 Memory PIC16F627A, 4.2.1 GENERAL PURPOSE REGISTER PIC16F628A and FILE PIC16F648A The register file is organized as 224x8 in the 03FFh PIC16F627A/628A and 256x8 in the PIC16F648A. Each is accessed either directly or indirectly through On-chip Program Memory the File Select Register (FSR), See Section4.4 “Indirect Addressing, INDF and FSR Registers”. PIC16F628A and PIC16F648A 07FFh On-chip Program Memory PIC16F648A only 0FFFh 1FFFh © 2009 Microchip Technology Inc. DS40044G-page 17

PIC16F627A/628A/648A FIGURE 4-2: DATA MEMORY MAP OF THE PIC16F627A AND PIC16F628A File Address Indirect addr.(1) 00h Indirect addr.(1) 80h Indirect addr.(1) 100h Indirect addr.(1) 180h TMR0 01h OPTION 81h TMR0 101h OPTION 181h PCL 02h PCL 82h PCL 102h PCL 182h STATUS 03h STATUS 83h STATUS 103h STATUS 183h FSR 04h FSR 84h FSR 104h FSR 184h PORTA 05h TRISA 85h 105h 185h PORTB 06h TRISB 86h PORTB 106h TRISB 186h 07h 87h 107h 187h 08h 88h 108h 188h 09h 89h 109h 189h PCLATH 0Ah PCLATH 8Ah PCLATH 10Ah PCLATH 18Ah INTCON 0Bh INTCON 8Bh INTCON 10Bh INTCON 18Bh PIR1 0Ch PIE1 8Ch 10Ch 18Ch 0Dh 8Dh 10Dh 18Dh TMR1L 0Eh PCON 8Eh 10Eh 18Eh TMR1H 0Fh 8Fh 10Fh 18Fh T1CON 10h 90h TMR2 11h 91h T2CON 12h PR2 92h 13h 93h 14h 94h CCPR1L 15h 95h CCPR1H 16h 96h CCP1CON 17h 97h RCSTA 18h TXSTA 98h TXREG 19h SPBRG 99h RCREG 1Ah EEDATA 9Ah 1Bh EEADR 9Bh 1Ch EECON1 9Ch 1Dh EECON2(1) 9Dh 1Eh 9Eh CMCON 1Fh VRCON 9Fh 11Fh 20h General 120h A0h Purpose General General Register Purpose Purpose 48 Bytes 14Fh Register Register 150h 80 Bytes 80 Bytes 6Fh EFh 16Fh 1EFh 70h F0h 170h 1F0h accesses accesses accesses 16 Bytes 70h-7Fh 70h-7Fh 70h-7Fh 7Fh FFh 17Fh 1FFh Bank 0 Bank 1 Bank 2 Bank 3 Unimplemented data memory locations, read as ‘0’. Note 1: Not a physical register. DS40044G-page 18 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 4-3: DATA MEMORY MAP OF THE PIC16F648A File Address Indirect addr.(1) 00h Indirect addr.(1) 80h Indirect addr.(1) 100h Indirect addr.(1) 180h TMR0 01h OPTION 81h TMR0 101h OPTION 181h PCL 02h PCL 82h PCL 102h PCL 182h STATUS 03h STATUS 83h STATUS 103h STATUS 183h FSR 04h FSR 84h FSR 104h FSR 184h PORTA 05h TRISA 85h 105h 185h PORTB 06h TRISB 86h PORTB 106h TRISB 186h 07h 87h 107h 187h 08h 88h 108h 188h 09h 89h 109h 189h PCLATH 0Ah PCLATH 8Ah PCLATH 10Ah PCLATH 18Ah INTCON 0Bh INTCON 8Bh INTCON 10Bh INTCON 18Bh PIR1 0Ch PIE1 8Ch 10Ch 18Ch 0Dh 8Dh 10Dh 18Dh TMR1L 0Eh PCON 8Eh 10Eh 18Eh TMR1H 0Fh 8Fh 10Fh 18Fh T1CON 10h 90h TMR2 11h 91h T2CON 12h PR2 92h 13h 93h 14h 94h CCPR1L 15h 95h CCPR1H 16h 96h CCP1CON 17h 97h RCSTA 18h TXSTA 98h TXREG 19h SPBRG 99h RCREG 1Ah EEDATA 9Ah 1Bh EEADR 9Bh 1Ch EECON1 9Ch 1Dh EECON2(1) 9Dh 1Eh 9Eh CMCON 1Fh VRCON 9Fh 11Fh 20h 120h A0h General General General Purpose Purpose Purpose Register Register Register 80 Bytes 80 Bytes 80 Bytes 6Fh EFh 16Fh 1EFh 70h F0h 170h 1F0h accesses accesses accesses 16 Bytes 70h-7Fh 70h-7Fh 70h-7Fh 7Fh FFh 17Fh 1FFh Bank 0 Bank 1 Bank 2 Bank 3 Unimplemented data memory locations, read as ‘0’. Note 1: Not a physical register. © 2009 Microchip Technology Inc. DS40044G-page 19

PIC16F627A/628A/648A 4.2.2 SPECIAL FUNCTION REGISTERS The SFRs are registers used by the CPU and Periph- eral functions for controlling the desired operation of the device (Table4-3). These registers are static RAM. The special registers can be classified into two sets (core and peripheral). The SFRs associated with the “core” functions are described in this section. Those related to the operation of the peripheral features are described in the section of that peripheral feature. TABLE 4-3: SPECIAL REGISTERS SUMMARY BANK0 Value on Details Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR Reset(1) on Page Bank 0 00h INDF Addressing this location uses contents of FSR to address data memory (not a physical register) xxxx xxxx 30 01h TMR0 Timer0 Module’s Register xxxx xxxx 47 02h PCL Program Counter’s (PC) Least Significant Byte 0000 0000 30 03h STATUS IRP RP1 RP0 TO PD Z DC C 0001 1xxx 24 04h FSR Indirect Data Memory Address Pointer xxxx xxxx 30 05h PORTA RA7 RA6 RA5 RA4 RA3 RA2 RA1 RA0 xxxx 0000 33 06h PORTB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx xxxx 38 07h — Unimplemented — — 08h — Unimplemented — — 09h — Unimplemented — — 0Ah PCLATH — — — Write Buffer for upper 5 bits of Program Counter ---0 0000 30 0Bh INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 26 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 28 0Dh — Unimplemented — — 0Eh TMR1L Holding Register for the Least Significant Byte of the 16-bit TMR1 Register xxxx xxxx 50 0Fh TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register xxxx xxxx 50 10h T1CON — — T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 50 11h TMR2 TMR2 Module’s Register 0000 0000 54 12h T2CON — TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 54 13h — Unimplemented — — 14h — Unimplemented — — 15h CCPR1L Capture/Compare/PWM Register (LSB) xxxx xxxx 57 16h CCPR1H Capture/Compare/PWM Register (MSB) xxxx xxxx 57 17h CCP1CON — — CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 57 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 74 19h TXREG USART Transmit Data Register 0000 0000 79 1Ah RCREG USART Receive Data Register 0000 0000 82 1Bh — Unimplemented — — 1Ch — Unimplemented — — 1Dh — Unimplemented — — 1Eh — Unimplemented — — 1Fh CMCON C2OUT C1OUT C2INV C1INV CIS CM2 CM1 CM0 0000 0000 63 Legend: - = Unimplemented locations read as ‘0’, u = unchanged, x = unknown, q = value depends on condition, shaded = unimplemented Note 1: For the initialization condition for registers tables, refer to Table14-6 and Table14-7. DS40044G-page 20 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 4-4: SPECIAL FUNCTION REGISTERS SUMMARY BANK1 Value on Details Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR Reset(1) on Page Bank 1 80h INDF Addressing this location uses contents of FSR to address data memory (not a physical xxxx xxxx 30 register) 81h OPTION RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 25 82h PCL Program Counter’s (PC) Least Significant Byte 0000 0000 30 83h STATUS IRP RP1 RP0 TO PD Z DC C 0001 1xxx 24 84h FSR Indirect Data Memory Address Pointer xxxx xxxx 30 85h TRISA TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 1111 1111 33 86h TRISB TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 38 87h — Unimplemented — — 88h — Unimplemented — — 89h — Unimplemented — — 8Ah PCLATH — — — Write Buffer for upper 5 bits of Program Counter ---0 0000 30 8Bh INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 26 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 27 8Dh — Unimplemented — — 8Eh PCON — — — — OSCF — POR BOR ---- 1-0x 29 8Fh — Unimplemented — — 90h — Unimplemented — — 91h — Unimplemented — — 92h PR2 Timer2 Period Register 1111 1111 54 93h — Unimplemented — — 94h — Unimplemented — — 95h — Unimplemented — — 96h — Unimplemented — — 97h — Unimplemented — — 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 73 99h SPBRG Baud Rate Generator Register 0000 0000 75 9Ah EEDATA EEPROM Data Register xxxx xxxx 91 9Bh EEADR EEPROM Address Register xxxx xxxx 92 9Ch EECON1 — — — — WRERR WREN WR RD ---- x000 92 9Dh EECON2 EEPROM Control Register 2 (not a physical register) ---- ---- 92 9Eh — Unimplemented — — 9Fh VRCON VREN VROE VRR — VR3 VR2 VR1 VR0 000- 0000 69 Legend: - = Unimplemented locations read as ‘0’, u = unchanged, x = unknown, q = value depends on condition, shaded = unimplemented Note 1: For the initialization condition for registers tables, refer to Table14-6 and Table14-7. © 2009 Microchip Technology Inc. DS40044G-page 21

PIC16F627A/628A/648A TABLE 4-5: SPECIAL FUNCTION REGISTERS SUMMARY BANK2 Value on Details Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR Reset(1) on Page Bank 2 100h INDF Addressing this location uses contents of FSR to address data memory (not a physical register) xxxx xxxx 30 101h TMR0 Timer0 Module’s Register xxxx xxxx 47 102h PCL Program Counter’s (PC) Least Significant Byte 0000 0000 30 103h STATUS IRP RP1 RP0 TO PD Z DC C 0001 1xxx 24 104h FSR Indirect Data Memory Address Pointer xxxx xxxx 30 105h — Unimplemented — — 106h PORTB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx xxxx 38 107h — Unimplemented — — 108h — Unimplemented — — 109h — Unimplemented — — 10Ah PCLATH — — — Write Buffer for upper 5 bits of Program Counter ---0 0000 30 10Bh INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 26 10Ch — Unimplemented — — 10Dh — Unimplemented — — 10Eh — Unimplemented — — 10Fh — Unimplemented — — 110h — Unimplemented — — 111h — Unimplemented — — 112h — Unimplemented — — 113h — Unimplemented — — 114h — Unimplemented — — 115h — Unimplemented — — 116h — Unimplemented — — 117h — Unimplemented — — 118h — Unimplemented — — 119h — Unimplemented — — 11Ah — Unimplemented — — 11Bh — Unimplemented — — 11Ch — Unimplemented — — 11Dh — Unimplemented — — 11Eh — Unimplemented — — 11Fh — Unimplemented — — Legend: - = Unimplemented locations read as ‘0’, u = unchanged, x = unknown, q = value depends on condition, shaded = unimplemented. Note 1: For the initialization condition for registers tables, refer to Table14-6 and Table14-7. DS40044G-page 22 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 4-6: SPECIAL FUNCTION REGISTERS SUMMARY BANK3 Value on Details Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR Reset(1) on Page Bank 3 180h INDF Addressing this location uses contents of FSR to address data memory (not a physical register) xxxx xxxx 30 181h OPTION RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 25 182h PCL Program Counter’s (PC) Least Significant Byte 0000 0000 30 183h STATUS IRP RP1 RP0 TO PD Z DC C 0001 1xxx 24 184h FSR Indirect Data Memory Address Pointer xxxx xxxx 30 185h — Unimplemented — — 186h TRISB TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 38 187h — Unimplemented — — 188h — Unimplemented — — 189h — Unimplemented — — 18Ah PCLATH — — — Write Buffer for upper 5 bits of Program Counter ---0 0000 30 18Bh INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 26 18Ch — Unimplemented — — 18Dh — Unimplemented — — 18Eh — Unimplemented — — 18Fh — Unimplemented — — 190h — Unimplemented — — 191h — Unimplemented — — 192h — Unimplemented — — 193h — Unimplemented — — 194h — Unimplemented — — 195h — Unimplemented — — 196h — Unimplemented — — 197h — Unimplemented — — 198h — Unimplemented — — 199h — Unimplemented — — 19Ah — Unimplemented — — 19Bh — Unimplemented — — 19Ch — Unimplemented — — 19Dh — Unimplemented — — 19Eh — Unimplemented — — 19Fh — Unimplemented — — Legend: - = Unimplemented locations read as ‘0’, u = unchanged, x = unknown, q = value depends on condition, shaded = unimplemented Note 1: For the initialization condition for registers tables, refer to Table14-6 and Table14-7. © 2009 Microchip Technology Inc. DS40044G-page 23

PIC16F627A/628A/648A 4.2.2.1 Status Register For example, CLRF STATUS will clear the upper-three bits and set the Z bit. This leaves the Status register The Status register, shown in Register4-1, contains the as “000uu1uu” (where u = unchanged). arithmetic status of the ALU; the Reset status and the bank select bits for data memory (SRAM). It is recommended, therefore, that only BCF, BSF, SWAPF and MOVWF instructions are used to alter the The Status register can be the destination for any Status register because these instructions do not affect instruction, like any other register. If the Status register any Status bit. For other instructions, not affecting any is the destination for an instruction that affects the Z, Status bits, see the “Instruction Set Summary”. DC or C bits, then the write to these three bits is disabled. These bits are set or cleared according to the Note: The C and DC bits operate as a Borrow device logic. Furthermore, the TO and PD bits are non- and Digit Borrow out bit, respectively, in writable. Therefore, the result of an instruction with the subtraction. See the SUBLW and SUBWF Status register as destination may be different than instructions for examples. intended. REGISTER 4-1: STATUS – STATUS REGISTER (ADDRESS: 03h, 83h, 103h, 183h) R/W-0 R/W-0 R/W-0 R-1 R-1 R/W-x R/W-x R/W-x IRP RP1 RP0 TO PD Z DC C bit 7 bit 0 bit 7 IRP: Register Bank Select bit (used for indirect addressing) 1 = Bank 2, 3 (100h-1FFh) 0 = Bank 0, 1 (00h-FFh) bit 6-5 RP<1:0>: Register Bank Select bits (used for direct addressing) 00 = Bank 0 (00h-7Fh) 01 = Bank 1 (80h-FFh) 10 = Bank 2 (100h-17Fh) 11 = Bank 3 (180h-1FFh) bit 4 TO: Time Out bit 1 = After power-up, CLRWDT instruction or SLEEP instruction 0 = A WDT time out occurred bit 3 PD: Power-down bit 1 = After power-up or by the CLRWDT instruction 0 = By execution of the SLEEP instruction bit 2 Z: Zero bit 1 = The result of an arithmetic or logic operation is zero 0 = The result of an arithmetic or logic operation is not zero bit 1 DC: Digit Carry/Borrow bit (ADDWF, ADDLW,SUBLW,SUBWF instructions) (for Borrow the polarity is reversed) 1 = A carry-out from the 4th low order bit of the result occurred 0 = No carry-out from the 4th low order bit of the result bit 0 C: Carry/Borrow bit (ADDWF, ADDLW,SUBLW,SUBWF instructions) 1 = A carry-out from the Most Significant bit of the result occurred 0 = No carry-out from the Most Significant bit of the result occurred Note: For Borrow, the polarity is reversed. A subtraction is executed by adding the two’s complement of the second operand. For rotate (RRF, RLF) instructions, this bit is loaded with either the high or low order bit of the source register. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 24 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 4.2.2.2 OPTION Register Note: To achieve a 1:1 prescaler assignment for The Option register is a readable and writable register, TMR0, assign the prescaler to the WDT which contains various control bits to configure the (PSA = 1). See Section6.3.1 “Switching TMR0/WDT prescaler, the external RB0/INT interrupt, Prescaler Assignment”. TMR0 and the weak pull-ups on PORTB. REGISTER 4-2: OPTION_REG – OPTION REGISTER (ADDRESS: 81h, 181h) R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 bit 7 bit 0 bit 7 RBPU: PORTB Pull-up Enable bit 1 = PORTB pull-ups are disabled 0 = PORTB pull-ups are enabled by individual port latch values bit 6 INTEDG: Interrupt Edge Select bit 1 = Interrupt on rising edge of RB0/INT pin 0 = Interrupt on falling edge of RB0/INT pin bit 5 T0CS: TMR0 Clock Source Select bit 1 = Transition on RA4/T0CKI/CMP2 pin 0 = Internal instruction cycle clock (CLKOUT) bit 4 T0SE: TMR0 Source Edge Select bit 1 = Increment on high-to-low transition on RA4/T0CKI/CMP2 pin 0 = Increment on low-to-high transition on RA4/T0CKI/CMP2 pin bit 3 PSA: Prescaler Assignment bit 1 = Prescaler is assigned to the WDT 0 = Prescaler is assigned to the Timer0 module bit 2-0 PS<2:0>: Prescaler Rate Select bits Bit Value TMR0 Rate WDT Rate 000 1 : 2 1 : 1 001 1 : 4 1 : 2 010 1 : 8 1 : 4 011 1 : 16 1 : 8 100 1 : 32 1 : 16 101 1 : 64 1 : 32 110 1 : 128 1 : 64 111 1 : 256 1 : 128 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 25

PIC16F627A/628A/648A 4.2.2.3 INTCON Register Note: Interrupt flag bits get set when an interrupt The INTCON register is a readable and writable condition occurs regardless of the state of register, which contains the various enable and flag bits its corresponding enable bit or the global for all interrupt sources except the comparator module. enable bit, GIE (INTCON<7>). See Section4.2.2.4 “PIE1 Register” and Section4.2.2.5 “PIR1 Register” for a description of the comparator enable and flag bits. REGISTER 4-3: INTCON – INTERRUPT CONTROL REGISTER (ADDRESS: 0Bh, 8Bh, 10Bh, 18Bh) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-x GIE PEIE T0IE INTE RBIE T0IF INTF RBIF bit 7 bit 0 bit 7 GIE: Global Interrupt Enable bit 1 = Enables all un-masked interrupts 0 = Disables all interrupts bit 6 PEIE: Peripheral Interrupt Enable bit 1 = Enables all un-masked peripheral interrupts 0 = Disables all peripheral interrupts bit 5 T0IE: TMR0 Overflow Interrupt Enable bit 1 = Enables the TMR0 interrupt 0 = Disables the TMR0 interrupt bit 4 INTE: RB0/INT External Interrupt Enable bit 1 = Enables the RB0/INT external interrupt 0 = Disables the RB0/INT external interrupt bit 3 RBIE: RB Port Change Interrupt Enable bit 1 = Enables the RB port change interrupt 0 = Disables the RB port change interrupt bit 2 T0IF: TMR0 Overflow Interrupt Flag bit 1 = TMR0 register has overflowed (must be cleared in software) 0 = TMR0 register did not overflow bit 1 INTF: RB0/INT External Interrupt Flag bit 1 = The RB0/INT external interrupt occurred (must be cleared in software) 0 = The RB0/INT external interrupt did not occur bit 0 RBIF: RB Port Change Interrupt Flag bit 1 = When at least one of the RB<7:4> pins changes state (must be cleared in software) 0 = None of the RB<7:4> pins have changed state Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 26 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 4.2.2.4 PIE1 Register This register contains interrupt enable bits. REGISTER 4-4: PIE1 – PERIPHERAL INTERRUPT ENABLE REGISTER 1 (ADDRESS: 8Ch) R/W-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE bit 7 bit 0 bit 7 EEIE: EE Write Complete Interrupt Enable Bit 1 = Enables the EE write complete interrupt 0 = Disables the EE write complete interrupt bit 6 CMIE: Comparator Interrupt Enable bit 1 = Enables the comparator interrupt 0 = Disables the comparator interrupt bit 5 RCIE: USART Receive Interrupt Enable bit 1 = Enables the USART receive interrupt 0 = Disables the USART receive interrupt bit 4 TXIE: USART Transmit Interrupt Enable bit 1 = Enables the USART transmit interrupt 0 = Disables the USART transmit interrupt bit 3 Unimplemented: Read as ‘0’ bit 2 CCP1IE: CCP1 Interrupt Enable bit 1 = Enables the CCP1 interrupt 0 = Disables the CCP1 interrupt bit 1 TMR2IE: TMR2 to PR2 Match Interrupt Enable bit 1 = Enables the TMR2 to PR2 match interrupt 0 = Disables the TMR2 to PR2 match interrupt bit 0 TMR1IE: TMR1 Overflow Interrupt Enable bit 1 = Enables the TMR1 overflow interrupt 0 = Disables the TMR1 overflow interrupt Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 27

PIC16F627A/628A/648A 4.2.2.5 PIR1 Register Note: Interrupt flag bits get set when an interrupt This register contains interrupt flag bits. condition occurs regardless of the state of its corresponding enable bit or the global enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt. REGISTER 4-5: PIR1 – PERIPHERAL INTERRUPT REGISTER 1 (ADDRESS: 0Ch) R/W-0 R/W-0 R-0 R-0 U-0 R/W-0 R/W-0 R/W-0 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF bit 7 bit 0 bit 7 EEIF: EEPROM Write Operation Interrupt Flag bit 1 = The write operation completed (must be cleared in software) 0 = The write operation has not completed or has not been started bit 6 CMIF: Comparator Interrupt Flag bit 1 = Comparator output has changed 0 = Comparator output has not changed bit 5 RCIF: USART Receive Interrupt Flag bit 1 = The USART receive buffer is full 0 = The USART receive buffer is empty bit 4 TXIF: USART Transmit Interrupt Flag bit 1 = The USART transmit buffer is empty 0 = The USART transmit buffer is full bit 3 Unimplemented: Read as ‘0’ bit 2 CCP1IF: CCP1 Interrupt Flag bit Capture Mode 1 = A TMR1 register capture occurred (must be cleared in software) 0 = No TMR1 register capture occurred Compare Mode 1 = A TMR1 register compare match occurred (must be cleared in software) 0 = No TMR1 register compare match occurred PWM Mode Unused in this mode bit 1 TMR2IF: TMR2 to PR2 Match Interrupt Flag bit 1 = TMR2 to PR2 match occurred (must be cleared in software) 0 = No TMR2 to PR2 match occurred bit 0 TMR1IF: TMR1 Overflow Interrupt Flag bit 1 = TMR1 register overflowed (must be cleared in software) 0 = TMR1 register did not overflow Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 28 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 4.2.2.6 PCON Register The PCON register contains flag bits to differentiate Note: BOR is unknown on Power-on Reset. It between a Power-on Reset, an external MCLR Reset, must then be set by the user and checked WDT Reset or a Brown-out Reset. on subsequent Resets to see if BOR is cleared, indicating a brown-out has occurred. The BOR Status bit is a “don’t care” and is not necessarily predictable if the brown-out circuit is disabled (by clearing the BOREN bit in the Configuration Word). REGISTER 4-6: PCON – POWER CONTROL REGISTER (ADDRESS: 8Eh) U-0 U-0 U-0 U-0 R/W-1 U-0 R/W-0 R/W-x — — — — OSCF — POR BOR bit 7 bit 0 bit 7-4 Unimplemented: Read as ‘0’ bit 3 OSCF: INTOSC Oscillator Frequency bit 1 = 4 MHz typical 0 = 48 kHz typical bit 2 Unimplemented: Read as ‘0’ bit 1 POR: Power-on Reset Status bit 1 = No Power-on Reset occurred 0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs) bit 0 BOR: Brown-out Reset Status bit 1 = No Brown-out Reset occurred 0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs) Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 29

PIC16F627A/628A/648A 4.3 PCL and PCLATH The stack operates as a circular buffer. This means that after the stack has been PUSHed eight times, the ninth The Program Counter (PC) is 13-bits wide. The low PUSH overwrites the value that was stored from the byte comes from the PCL register, which is a readable first PUSH. The tenth PUSH overwrites the second and writable register. The high byte (PC<12:8>) is not PUSH (and so on). directly readable or writable and comes from PCLATH. On any Reset, the PC is cleared. Figure4-4 shows the Note1: There are no Status bits to indicate stack overflow or stack underflow conditions. two situations for loading the PC. The upper example in Figure4-4 shows how the PC is loaded on a write to 2: There are no instructions/mnemonics PCL (PCLATH<4:0> → PCH). The lower example in called PUSH or POP. These are actions Figure4-4 shows how the PC is loaded during a CALL that occur from the execution of the or GOTO instruction (PCLATH<4:3> → PCH). CALL, RETURN, RETLW and RETFIE instructions, or the vectoring to an FIGURE 4-4: LOADING OF PC IN interrupt address. DIFFERENT SITUATIONS 4.4 Indirect Addressing, INDF and PCH PCL FSR Registers 12 8 7 0 Instruction with The INDF register is not a physical register. Addressing PC PCL as the INDF register will cause indirect addressing. Destination PCLATH<4:0> 8 5 ALU result Indirect addressing is possible by using the INDF register. Any instruction using the INDF register actually accesses data pointed to by the File Select PCLATH Register (FSR). Reading INDF itself indirectly will produce 00h. Writing to the INDF register indirectly PCH PCL results in a no-operation (although Status bits may be 12 11 10 8 7 0 affected). An effective 9-bit address is obtained by PC GOTO, CALL concatenating the 8-bit FSR register and the IRP bit 2 PCLATH<4:3> 11 (STATUS<7>), as shown in Figure4-5. Opcode <10:0> A simple program to clear RAM location 20h-2Fh using PCLATH indirect addressing is shown in Example4-1. EXAMPLE 4-1: INDIRECT ADDRESSING 4.3.1 COMPUTED GOTO MOVLW 0x20 ;initialize pointer MOVWF FSR ;to RAM A computed GOTO is accomplished by adding an offset NEXT CLRF INDF ;clear INDF register to the program counter (ADDWF PCL). When doing a INCF FSR ;inc pointer table read using a computed GOTO method, care BTFSS FSR,4 ;all done? should be exercised if the table location crosses a PCL GOTO NEXT ;no clear next memory boundary (each 256-byte block). Refer to the ;yes continue Application Note AN556 “Implementing a Table Read” (DS00556). 4.3.2 STACK The PIC16F627A/628A/648A family has an 8-level deep x 13-bit wide hardware stack (Figure4-1). The stack space is not part of either program or data space and the Stack Pointer is not readable or writable. The PC is PUSHed onto the stack when a CALL instruction is executed or an interrupt causes a branch. The stack is POPed in the event of a RETURN, RETLW or a RETFIE instruction execution. PCLATH is not affected by a PUSH or POP operation. DS40044G-page 30 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 4-5: DIRECT/INDIRECT ADDRESSING PIC16F627A/628A/648A Status Status Register Direct Addressing Register Indirect Addressing RP1 RP0 6 from opcode 0 IRP 7 FSR Register 0 bank select location select bank select location select 00 01 10 11 00h 180h RAM File Registers 7Fh 1FFh Bank 0 Bank 1 Bank 2 Bank 3 Note: For memory map detail see Figure4-3, Figure4-2 and Figure4-1. © 2009 Microchip Technology Inc. DS40044G-page 31

PIC16F627A/628A/648A NOTES: DS40044G-page 32 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 5.0 I/O PORTS In one of the comparator modes defined by the CMCON register, pins RA3 and RA4 become outputs The PIC16F627A/628A/648A have two ports, PORTA of the comparators. The TRISA<4:3> bits must be and PORTB. Some pins for these I/O ports are cleared to enable outputs to use this function. multiplexed with alternate functions for the peripheral features on the device. In general, when a peripheral is EXAMPLE 5-1: INITIALIZING PORTA enabled, that pin may not be used as a general CLRF PORTA ;Initialize PORTA by purpose I/O pin. ;setting ;output data latches 5.1 PORTA and TRISA Registers MOVLW 0x07 ;Turn comparators off and MOVWF CMCON ;enable pins for I/O PORTA is an 8-bit wide latch. RA4 is a Schmitt Trigger ;functions input and an open drain output. Port RA4 is multiplexed BCF STATUS, RP1 with the T0CKI clock input. RA5(1) is a Schmitt Trigger BSF STATUS, RP0;Select Bank1 input only and has no output drivers. All other RA port MOVLW 0x1F ;Value used to initialize pins have Schmitt Trigger input levels and full CMOS ;data direction MOVWF TRISA ;Set RA<4:0> as inputs output drivers. All pins have data direction bits (TRIS ;TRISA<5> always registers) which can configure these pins as input or ;read as ‘1’. output. ;TRISA<7:6> A ‘1’ in the TRISA register puts the corresponding ;depend on oscillator output driver in a High-impedance mode. A ‘0’ in the ;mode TRISA register puts the contents of the output latch on the selected pin(s). FIGURE 5-1: BLOCK DIAGRAM OF Reading the PORTA register reads the status of the RA0/AN0:RA1/AN1 PINS pins whereas writing to it will write to the port latch. All write operations are read-modify-write operations. So a Data write to a port implies that the port pins are first read, Bus D Q then this value is modified and written to the port data VDD latch. WR PORTA CK Q The PORTA pins are multiplexed with comparator and voltage reference functions. The operation of these Data Latch pins are selected by control bits in the CMCON D Q I/O Pin (Comparator Control register) register and the VRCON WR (Voltage Reference Control register) register. When TRISA CK Q selected as a comparator input, these pins will read Analog as‘0’s. TRIS Latch Input Mode VSS (CMCON Reg.) Note1: RA5 shares function with VPP. When VPP voltage levels are applied to RA5, the device will enter Programming mode. RD Schmitt Trigger TRISA Input Buffer 2: On Reset, the TRISA register is set to all inputs. The digital inputs (RA<3:0>) are disabled and the comparator inputs are Q D forced to ground to reduce current consumption. EN 3: TRISA<6:7> is overridden by oscillator configuration. When PORTA<6:7> is RD PORTA overridden, the data reads ‘0’ and the TRISA<6:7> bits are ignored. To Comparator TRISA controls the direction of the RA pins, even when they are being used as comparator inputs. The user must make sure to keep the pins configured as inputs when using them as comparator inputs. The RA2 pin will also function as the output for the voltage reference. When in this mode, the VREF pin is a very high-impedance output. The user must configure TRISA<2> bit as an input and use high-impedance loads. © 2009 Microchip Technology Inc. DS40044G-page 33

PIC16F627A/628A/648A FIGURE 5-2: BLOCK DIAGRAM OF RA2/AN2/VREF PIN Data Bus D Q VDD WR PORTA CK Q Data Latch D Q RA2 Pin WR TRISA CK Q Analog Input Mode VSS TRIS Latch (CMCON Reg.) RD TRISA Schmitt Trigger Input Buffer Q D EN RD PORTA To Comparator VROE VREF FIGURE 5-3: BLOCK DIAGRAM OF THE RA3/AN3/CMP1 PIN Data Comparator Mode = 110 (CMCON Reg.) Bus D Q VDD Comparator Output WR 1 PORTA CK Q Data Latch 0 D Q RA3 Pin WR TRISA Analog CK Q Input Mode VSS TRIS Latch (CMCON Reg.) RD TRISA Schmitt Trigger Input Buffer Q D EN RD PORTA To Comparator DS40044G-page 34 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 5-4: BLOCK DIAGRAM OF RA4/T0CKI/CMP2 PIN Data Comparator Mode = 110 (CMCON Reg.) Bus D Q Comparator Output WR 1 PORTA CK Q Data Latch 0 D Q RA4 Pin WR N TRISA CK Q TRIS Latch Vss Vss Schmitt Trigger Input Buffer RD TRISA Q D EN RD PORTA TMR0 Clock Input FIGURE 5-5: BLOCK DIAGRAM OF THE FIGURE 5-6: BLOCK DIAGRAM OF RA5/MCLR/VPP PIN RA6/OSC2/CLKOUT PIN From OSC1 OSC Circuit VDD MCLRE (Configuration Bit) CLKOUT(FOSC/4) MCLR 1 circuit MCLR Filter D Q 0 WR Program Schmitt Trigger PORTA mode Input Buffer CK Q HV Detect F10O1S,C 1 =11 (2)Data Latch VSS RA5/MCLR/VPP D Q Data WR Bus TRISA VSS CK Q TRIS Latch RD TRISA Schmitt Trigger RD Input Buffer TRISA VSS FOSC = 011, 100, 110 (1) Q D Q D EN EN RD RD PORTA PORTA Note 1: INTOSC with RA6 = I/O or RC with RA6 = I/O. 2: INTOSC with RA6 = CLKOUT or RC with RA6 = CLKOUT. © 2009 Microchip Technology Inc. DS40044G-page 35

PIC16F627A/628A/648A FIGURE 5-7: BLOCK DIAGRAM OF RA7/OSC1/CLKIN PIN To Clock Circuits VDD Data Bus D Q RA7/OSC1/CLKIN Pin WR PORTA CK Q Data Latch D Q VSS WR TRISA CK Q TRIS Latch RD TRISA FOSC = 100, 101(1) Q D Schmitt Trigger Input Buffer EN RD PORTA Note 1: INTOSC with CLKOUT and INTOSC with I/O. DS40044G-page 36 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 5-1: PORTA FUNCTIONS Input Output Name Function Description Type Type RA0/AN0 RA0 ST CMOS Bidirectional I/O port AN0 AN — Analog comparator input RA1/AN1 RA1 ST CMOS Bidirectional I/O port AN1 AN — Analog comparator input RA2/AN2/VREF RA2 ST CMOS Bidirectional I/O port AN2 AN — Analog comparator input VREF — AN VREF output RA3/AN3/CMP1 RA3 ST CMOS Bidirectional I/O port AN3 AN — Analog comparator input CMP1 — CMOS Comparator 1 output RA4/T0CKI/CMP2 RA4 ST OD Bidirectional I/O port. Output is open drain type. T0CKI ST — External clock input for TMR0 or comparator output CMP2 — OD Comparator 2 output RA5/MCLR/VPP RA5 ST — Input port MCLR ST — Master clear. When configured as MCLR, this pin is an active low Reset to the device. Voltage on MCLR/VPP must not exceed VDD during normal device operation. VPP HV — Programming voltage input RA6/OSC2/CLKOUT RA6 ST CMOS Bidirectional I/O port OSC2 — XTAL Oscillator crystal output. Connects to crystal resonator in Crystal Oscillator mode. CLKOUT — CMOS In RC or INTOSC mode. OSC2 pin can output CLKOUT, which has 1/4 the frequency of OSC1. RA7/OSC1/CLKIN RA7 ST CMOS Bidirectional I/O port OSC1 XTAL — Oscillator crystal input. Connects to crystal resonator in Crystal Oscillator mode. CLKIN ST — External clock source input. RC biasing pin. Legend: O = Output CMOS = CMOS Output P = Power — = Not used I = Input ST = Schmitt Trigger Input TTL = TTL Input OD = Open Drain Output AN = Analog TABLE 5-2: SUMMARY OF REGISTERS ASSOCIATED WITH PORTA Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Other POR Resets 05h PORTA RA7 RA6 RA5(1) RA4 RA3 RA2 RA1 RA0 xxxx 0000 qqqu 0000 85h TRISA TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 1111 1111 1111 1111 1Fh CMCON C2OUT C1OUT C2INV C1INV CIS CM2 CM1 CM0 0000 0000 0000 0000 9Fh VRCON VREN VROE VRR — VR3 VR2 VR1 VR0 000- 0000 000- 0000 Legend: - = Unimplemented locations read as ‘0’, u = unchanged, x = unknown, q = value depends on condition. Shaded cells are not used for PORTA. Note 1: MCLRE configuration bit sets RA5 functionality. © 2009 Microchip Technology Inc. DS40044G-page 37

PIC16F627A/628A/648A 5.2 PORTB and TRISB Registers The interrupt-on-change feature is recommended for wake-up on key depression operation and operations PORTB is an 8-bit wide bidirectional port. The where PORTB is only used for the interrupt-on-change corresponding data direction register is TRISB. A ‘1’ in feature. Polling of PORTB is not recommended while the TRISB register puts the corresponding output driver using the interrupt-on-change feature. in a High-impedance mode. A ‘0’ in the TRISB register puts the contents of the output latch on the selected FIGURE 5-8: BLOCK DIAGRAM OF pin(s). RB0/INT PIN PORTB is multiplexed with the external interrupt, VDD USART, CCP module and the TMR1 clock input/output. RBPU The standard port functions and the alternate port PWeak Pull-up functions are shown in Table5-3. Alternate port VDD functions may override the TRIS setting when enabled. Reading PORTB register reads the status of the pins, whereas writing to it will write to the port latch. All write Data Bus operations are read-modify-write operations. So a write D Q to a port implies that the port pins are first read, then RB0/INT this value is modified and written to the port data latch. WR PORTB CK Q Each of the PORTB pins has a weak internal pull-up Data Latch VSS (≈200 μA typical). A single control bit can turn on all the pull-ups. This is done by clearing the RBPU (OPTION<7>) bit. The weak pull-up is automatically D Q turned off when the port pin is configured as an output. The pull-ups are disabled on Power-on Reset. WR TRISB CK Q Four of PORTB’s pins, RB<7:4>, have an interrupt-on- TRIS Latch change feature. Only pins configured as inputs can cause this interrupt to occur (i.e., any RB<7:4> pin configured as an output is excluded from the interrupt- TTL RD TRISB on-change comparison). The input pins (of RB<7:4>) Input Buffer are compared with the old value latched on the last read of PORTB. The “mismatch” outputs of RB<7:4> Q D are OR’ed together to generate the RBIF interrupt (flag latched in INTCON<0>). EENN This interrupt can wake the device from Sleep. The user, in the interrupt service routine, can clear the RD PORTB interrupt in the following manner: a) Any read or write of PORTB. This will end the INT mismatch condition. Schmitt Trigger b) Clear flag bit RBIF. A mismatch condition will continue to set flag bit RBIF. Reading PORTB will end the mismatch condition and allow flag bit RBIF to be cleared. This interrupt on mismatch feature, together with software configurable pull-ups on these four pins allow easy interface to a key pad and make it possible for wake-up on key-depression (See Application Note AN552 “Implementing Wake-up on Key Strokes” (DS00552). Note: If a change on the I/O pin should occur when a read operation is being executed (start of the Q2 cycle), then the RBIF interrupt flag may not getset. DS40044G-page 38 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 5-9: BLOCK DIAGRAM OF FIGURE 5-10: BLOCK DIAGRAM OF RB1/RX/DT PIN RB2/TX/CK PIN VDD VDD RBPU Weak RBPU Weak SPEN P Pull-up SPEN PPull-up VDD VDD USART Data Output USART TX/CK Output 1 1 Data Bus D Q 0 RB1/ Data Bus D Q 0 RB2/ TX/CK RX/DT WR PORTB WR PORTB CK Q CK Q Data Latch VSS Data Latch VSS D Q D Q WR TRISB WR TRISB CK Q CK Q TRIS Latch TRIS Latch Peripheral OE(1) Peripheral OE(1) TTL TTL RD TRISB Input RD TRISB Input Buffer Buffer Q D Q D EN EN RD PORTB RD PORTB USART Receive Input USART Slave Clock In Schmitt Schmitt Trigger Trigger Note 1: Peripheral OE (output enable) is only active if Note 1: Peripheral OE (output enable) is only active if peripheral select is active. peripheral select is active. © 2009 Microchip Technology Inc. DS40044G-page 39

PIC16F627A/628A/648A FIGURE 5-11: BLOCK DIAGRAM OF RB3/CCP1 PIN VDD RBPU Weak CCP1CON P Pull-up VDD CCP output 0 Data Bus D Q 1 RB3/ CCP1 WR PORTB CK Q Data Latch VSS D Q WR TRISB CK Q TRIS Latch Peripheral OE(2) TTL Input RD TRISB Buffer Q D EN RD PORTB CCP In Schmitt Trigger Note 1: Peripheral OE (output enable) is only active if peripheral select is active. DS40044G-page 40 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 5-12: BLOCK DIAGRAM OF RB4/PGM PIN VDD RBPU P weak pull-up Data Bus D Q VDD WR PORTB CK Q Data Latch RB4/PGM D Q WR TRISB CK Q VSS TRIS Latch RD TRISB LVP(Configuration Bit) RD PORTB PGM input TTL Schmitt input Trigger buffer Q D EN Q1 Set RBIF From other Q D RB<7:4> pins Q3 EN Note: The low-voltage programming disables the interrupt-on-change and the weak pull-ups on RB4. © 2009 Microchip Technology Inc. DS40044G-page 41

PIC16F627A/628A/648A FIGURE 5-13: BLOCK DIAGRAM OF RB5 PIN VDD RBPU weak VDD P pull-up Data Bus D Q RB5 pin WR PORTB CK Q Data Latch VSS D Q WR TRISB CK Q TRIS Latch TTL input buffer RD TRISB Q D RD PORTB EN Q1 Set RBIF From other Q D RB<7:4> pins Q3 EN DS40044G-page 42 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 5-14: BLOCK DIAGRAM OF RB6/T1OSO/T1CKI/PGC PIN VDD RBPU Pweak pull-up Data Bus D Q VDD WR PORTB CK Q Data Latch RB6/ D Q T1OSO/ T1CKI/ WR TRISB PGC CK Q pin VSS TRIS Latch RD TRISB T1OSCEN TTL input buffer RD PORTB TMR1 Clock Schmitt From RB7 Trigger Serial Programming Clock TMR1 oscillator Q D EN Q1 Set RBIF From other Q D RB<7:4> pins Q3 EN © 2009 Microchip Technology Inc. DS40044G-page 43

PIC16F627A/628A/648A FIGURE 5-15: BLOCK DIAGRAM OF THE RB7/T1OSI/PGD PIN VDD RBPU Pweak pull-up To RB6 TMR1 oscillator VDD Data Bus D Q WR PORTB CK Q RB7/T1OSI/ PGD pin Data Latch D Q VSS WR TRISB CK Q TRIS Latch RD TRISB T10SCEN TTL RD PORTB input buffer Serial Programming Input Schmitt Trigger Q D EN Q1 Set RBIF From other Q D RB<7:4> pins Q3 EN DS40044G-page 44 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 5-3: PORTB FUNCTIONS Output Name Function Input Type Description Type RB0/INT RB0 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. INT ST — External interrupt RB1/RX/DT RB1 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. RX ST — USART Receive Pin DT ST CMOS Synchronous data I/O RB2/TX/CK RB2 TTL CMOS Bidirectional I/O port TX — CMOS USART Transmit Pin CK ST CMOS Synchronous Clock I/O. Can be software programmed for internal weak pull-up. RB3/CCP1 RB3 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up. CCP1 ST CMOS Capture/Compare/PWM/I/O RB4/PGM RB4 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. PGM ST — Low-voltage programming input pin. When low-voltage programming is enabled, the interrupt-on-pin change and weak pull-up resistor are disabled. RB5 RB5 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. RB6/T1OSO/T1CKI/ RB6 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be PGC software programmed for internal weak pull-up. T1OSO — XTAL Timer1 Oscillator Output T1CKI ST — Timer1 Clock Input PGC ST — ICSP™ Programming Clock RB7/T1OSI/PGD RB7 TTL CMOS Bidirectional I/O port. Interrupt-on-pin change. Can be software programmed for internal weak pull-up. T1OSI XTAL — Timer1 Oscillator Input PGD ST CMOS ICSP Data I/O Legend: O = Output CMOS = CMOS Output P = Power — = Not used I = Input ST = Schmitt Trigger Input TTL = TTL Input OD = Open Drain Output AN = Analog TABLE 5-4: SUMMARY OF REGISTERS ASSOCIATED WITH PORTB Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Other POR Resets 06h, 106h PORTB RB7 RB6 RB5 RB4(1) RB3 RB2 RB1 RB0 xxxx xxxx uuuu uuuu 86h, 186h TRISB TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 1111 1111 81h, 181h OPTION RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111 Legend: u = unchanged, x = unknown. Shaded cells are not used for PORTB. Note 1: LVP configuration bit sets RB4 functionality. © 2009 Microchip Technology Inc. DS40044G-page 45

PIC16F627A/628A/648A 5.3 I/O Programming Considerations EXAMPLE 5-2: READ-MODIFY-WRITE INSTRUCTIONS ON AN 5.3.1 BIDIRECTIONAL I/O PORTS I/O PORT Any instruction that writes operates internally as a read ;Initial PORT settings:PORTB<7:4> Inputs followed by a write operation. The BCF and BSF ; PORTB<3:0> Outputs ;PORTB<7:6> have external pull-up and are instructions, for example, read the register into the ;not connected to other circuitry CPU, execute the bit operation and write the result ; back to the register. Caution must be used when these ; PORT latchPORT Pins instructions are applied to a port with both inputs and ---------- ---------- outputs defined. For example, a BSF operation on bit 5 BCF STATUS, RP0 ; of PORTB will cause all eight bits of PORTB to be read BCF PORTB, 7 ;01pp pppp 11pp pppp into the CPU. Then the BSF operation takes place on BSF STATUS, RP0 ; bit 5 and PORTB is written to the output latches. If BCF TRISB, 7 ;10pp pppp 11pp pppp another bit of PORTB is used as a bidirectional I/O pin BCF TRISB, 6 ;10pp pppp 10pp pppp (e.g., bit 0) and is defined as an input at this time, the ; ;Note that the user may have expected the input signal present on the pin itself would be read into ;pin values to be 00pp pppp. The 2nd BCF the CPU and rewritten to the data latch of this particular ;caused RB7 to be latched as the pin value pin, overwriting the previous content. As long as the pin ;(High). stays in the Input mode, no problem occurs. However, if bit 0 is switched into Output mode later on, the 5.3.2 SUCCESSIVE OPERATIONS ON I/O content of the data latch may now be unknown. PORTS Reading a port register reads the values of the port The actual write to an I/O port happens at the end of pins. Writing to the port register writes the value to the an instruction cycle, whereas for reading, the data port latch. When using read-modify-write instructions must be valid at the beginning of the instruction cycle (ex. BCF, BSF, etc.) on a port, the value of the port pins (Figure5-16). Therefore, care must be exercised if a is read, the desired operation is done to this value, and write followed by a read operation is carried out on the this value is then written to the port latch. same I/O port. The sequence of instructions should be Example5-2 shows the effect of two sequential read- such to allow the pin voltage to stabilize (load modify-write instructions (ex., BCF, BSF, etc.) on an dependent) before the next instruction, which causes I/Oport. that file to be read into the CPU, is executed. Other- A pin actively outputting a Low or High should not be wise, the previous state of that pin may be read into driven from external devices at the same time in order the CPU rather than the new state. When in doubt, it to change the level on this pin (“wired-OR”, “wired- is better to separate these instructions with a NOP or AND”). The resulting high output currents may damage another instruction not accessing this I/O port. the chip. FIGURE 5-16: SUCCESSIVE I/O OPERATION Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PC PC PC + 1 PC + 2 PC + 3 Instruction MOVWF PORTB MOVF PORTB, W NOP NOP fetched Write to PORTB Read to PORTB Port pin sampled here TPD Execute Execute Execute MOVWF MOVF NOP PORTB PORTB, W Note 1: This example shows write to PORTB followed by a read from PORTB. 2: Data setup time = (0.25 TCY - TPD) where TCY = instruction cycle and TPD = propagation delay of Q1 cycle to output valid. Therefore, at higher clock frequencies, a write followed by a read may be problematic. DS40044G-page 46 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 6.0 TIMER0 MODULE 6.2 Using Timer0 with External Clock The Timer0 module timer/counter has the following When an external clock input is used for Timer0, it must features: meet certain requirements. The external clock requirement is due to internal phase clock (TOSC) • 8-bit timer/counter synchronization. Also, there is a delay in the actual • Read/write capabilities incrementing of Timer0 after synchronization. • 8-bit software programmable prescaler • Internal or external clock select 6.2.1 EXTERNAL CLOCK SYNCHRONIZATION • Interrupt on overflow from FFh to 00h • Edge select for external clock When no prescaler is used, the external clock input is the same as the prescaler output. The synchronization Figure6-1 is a simplified block diagram of the Timer0 module. Additional information is available in the “PIC® of T0CKI with the internal phase clocks is accomplished by sampling the prescaler output on the Mid-Range MCU Family Reference Manual” (DS33023). Q2 and Q4 cycles of the internal phase clocks Timer mode is selected by clearing the T0CS bit (Figure6-1). Therefore, it is necessary for T0CKI to be (OPTION<5>). In Timer mode, the TMR0 register value high for at least 2TOSC (and a small RC delay of 20 ns) will increment every instruction cycle (without and low for at least 2TOSC (and a small RC delay of prescaler). If the TMR0 register is written to, the 20ns). Refer to the electrical specification of the increment is inhibited for the following two cycles. The desired device. user can work around this by writing an adjusted value When a prescaler is used, the external clock input is to the TMR0 register. divided by the asynchronous ripple-counter type Counter mode is selected by setting the T0CS bit. In prescaler so that the prescaler output is symmetrical. this mode the TMR0 register value will increment either For the external clock to meet the sampling on every rising or falling edge of pin RA4/T0CKI/CMP2. requirement, the ripple-counter must be taken into The incrementing edge is determined by the source account. Therefore, it is necessary for T0CKI to have a edge (T0SE) control bit (OPTION<4>). Clearing the period of at least 4TOSC (and a small RC delay of 40ns) T0SE bit selects the rising edge. Restrictions on the divided by the prescaler value. The only requirement external clock input are discussed in detail in on T0CKI high and low time is that they do not violate Section6.2 “Using Timer0 with External Clock”. the minimum pulse width requirement of 10ns. Refer to The prescaler is shared between the Timer0 module parameters 40, 41 and 42 in the electrical specification and the Watchdog Timer. The prescaler assignment is of the desired device. See Table17-8. controlled in software by the control bit PSA (OPTION<3>). Clearing the PSA bit will assign the prescaler to Timer0. The prescaler is not readable or writable. When the prescaler is assigned to the Timer0 module, prescale value of 1:2, 1:4,..., 1:256 are selectable. Section6.3 “Timer0 Prescaler” details the operation of the prescaler. 6.1 Timer0 Interrupt Timer0 interrupt is generated when the TMR0 register timer/counter overflows from FFh to 00h. This overflow sets the T0IF bit. The interrupt can be masked by clearing the T0IE bit (INTCON<5>). The T0IF bit (INTCON<2>) must be cleared in software by the Timer0 module interrupt service routine before re- enabling this interrupt. The Timer0 interrupt cannot wake the processor from Sleep since the timer is shut off during Sleep. © 2009 Microchip Technology Inc. DS40044G-page 47

PIC16F627A/628A/648A 6.3 Timer0 Prescaler The PSA and PS<2:0> bits (OPTION<3:0>) determine the prescaler assignment and prescale ratio. An 8-bit counter is available as a prescaler for the When assigned to the Timer0 module, all instructions Timer0 module, or as a postscaler for the Watchdog writing to the TMR0 register (e.g., CLRF 1, MOVWF 1, Timer. A prescaler assignment for the Timer0 module BSF 1, x....etc.) will clear the prescaler. When means that there is no postscaler for the Watchdog assigned to WDT, a CLRWDT instruction will clear the Timer, and vice-versa. prescaler along with the Watchdog Timer. The prescaler is not readable or writable. FIGURE 6-1: BLOCK DIAGRAM OF THE TIMER0/WDT FOSC/4 Data Bus 8 0 T0CKI 1 SYNC pin 1 2 TMR0 Reg 0 Cycles T0SE T0CS Set flag bit T0IF TMR1 Clock Source PSA on Overflow 0 WDT Postscaler/ Watchdog TMR0 Prescaler 1 Timer 8 PSA 8-to-1MUX PS<2:0> WDT Enable bit 1 WDT 0 Time-out PSA Note: T0SE, T0CS, PSA., PS<2:0> are bits in the Option Register. DS40044G-page 48 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 6.3.1 SWITCHING PRESCALER To change prescaler from the WDT to the Timer0 ASSIGNMENT module, use the sequence shown in Example6-2. This precaution must be taken even if the WDT is disabled. The prescaler assignment is fully under software control (i.e., it can be changed “on-the-fly” during EXAMPLE 6-2: CHANGING PRESCALER program execution). Use the instruction sequences (WDT→TIMER0) shown in Example6-1 when changing the prescaler assignment from Timer0 to WDT, to avoid an CLRWDT ;Clear WDT and ;prescaler unintended device Reset. BSF STATUS, RP0 MOVLW b'xxxx0xxx’ ;Select TMR0, new EXAMPLE 6-1: CHANGING PRESCALER ;prescale value and (TIMER0→WDT) ;clock source BCF STATUS, RP0 ;Skip if already in MOVWF OPTION_REG ;Bank 0 BCF STATUS, RP0 CLRWDT ;Clear WDT CLRF TMR0 ;Clear TMR0 and ;Prescaler BSF STATUS, RP0 ;Bank 1 MOVLW '00101111’b ;These 3 lines ;(5, 6, 7) MOVWF OPTION_REG ;are required only ;if desired PS<2:0> ;are CLRWDT ;000 or 001 MOVLW '00101xxx’b ;Set Postscaler to MOVWF OPTION_REG ;desired WDT rate BCF STATUS, RP0 ;Return to Bank 0 TABLE 6-1: REGISTERS ASSOCIATED WITH TIMER0 Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Other POR Resets 01h, 101h TMR0 Timer0 Module Register xxxx xxxx uuuu uuuu 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 81h, 181h OPTION(2) RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111 85h TRISA TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 1111 1111 1111 1111 Legend: - = Unimplemented locations, read as ‘0’, u = unchanged, x = unknown. Shaded cells are not used for Timer0. Note 1: Option is referred by OPTION_REG in MPLAB® IDE Software. © 2009 Microchip Technology Inc. DS40044G-page 49

PIC16F627A/628A/648A 7.0 TIMER1 MODULE In Timer mode, the TMR1 register pair value increments every instruction cycle. In Counter mode, it The Timer1 module is a 16-bit timer/counter consisting increments on every rising edge of the external clock of two 8-bit registers (TMR1H and TMR1L) which are input. readable and writable. The TMR1 register pair Timer1 can be enabled/disabled by setting/clearing (TMR1H:TMR1L) increments from 0000h to FFFFh control bit TMR1ON (T1CON<0>). and rolls over to 0000h. The Timer1 Interrupt, if enabled, is generated on overflow of the TMR1 register Timer1 also has an internal “Reset input”. This Reset pair which latches the interrupt flag bit TMR1IF can be generated by the CCP module (Section9.0 (PIR1<0>). This interrupt can be enabled/disabled by “Capture/Compare/PWM (CCP) Module”). setting/clearing the Timer1 interrupt enable bit TMR1IE Register7-1 shows the Timer1 control register. (PIE1<0>). For the PIC16F627A/628A/648A, when the Timer1 Timer1 can operate in one of two modes: oscillator is enabled (T1OSCEN is set), the RB7/ T1OSI/PGD and RB6/T1OSO/T1CKI/PGC pins • As a timer become inputs. That is, the TRISB<7:6> value is • As a counter ignored. The Operating mode is determined by the clock select bit, TMR1CS (T1CON<1>). REGISTER 7-1: T1CON – TIMER1 CONTROL REGISTER (ADDRESS: 10h) U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 — — T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON bit 7 bit 0 bit 7-6 Unimplemented: Read as ‘0’ bit 5-4 T1CKPS<1:0>: Timer1 Input Clock Prescale Select bits 11 = 1:8 Prescale value 10 = 1:4 Prescale value 01 = 1:2 Prescale value 00 = 1:1 Prescale value bit 3 T1OSCEN: Timer1 Oscillator Enable Control bit 1 = Oscillator is enabled 0 = Oscillator is shut off(1) bit 2 T1SYNC: Timer1 External Clock Input Synchronization Control bit TMR1CS = 1 1 = Do not synchronize external clock input 0 = Synchronize external clock input TMR1CS = 0 This bit is ignored. Timer1 uses the internal clock when TMR1CS = 0. bit 1 TMR1CS: Timer1 Clock Source Select bit 1 = External clock from pin RB6/T1OSO/T1CKI/PGC (on the rising edge) 0 = Internal clock (FOSC/4) bit 0 TMR1ON: Timer1 On bit 1 = Enables Timer1 0 = Stops Timer1 Note1: The oscillator inverter and feedback resistor are turned off to eliminate power drain. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 50 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 7.1 Timer1 Operation in Timer Mode 7.2.1 EXTERNAL CLOCK INPUT TIMING FOR SYNCHRONIZED COUNTER Timer mode is selected by clearing the TMR1CS MODE (T1CON<1>) bit. In this mode, the input clock to the timer is FOSC/4. The synchronize control bit T1SYNC When an external clock input is used for Timer1 in (T1CON<2>) has no effect since the internal clock is Synchronized Counter mode, it must meet certain always in sync. requirements. The external clock requirement is due to internal phase clock (TOSC) synchronization. Also, 7.2 Timer1 Operation in Synchronized there is a delay in the actual incrementing of the TMR1 register pair value after synchronization. Counter Mode When the prescaler is 1:1, the external clock input is Counter mode is selected by setting bit TMR1CS. In the same as the prescaler output. The synchronization this mode, the TMR1 register pair value increments on of T1CKI with the internal phase clocks is accom- every rising edge of clock input on pin RB7/T1OSI/PGD plished by sampling the prescaler output on the Q2 and when bit T1OSCEN is set or pin RB6/T1OSO/T1CKI/ Q4 cycles of the internal phase clocks. Therefore, it is PGC when bit T1OSCEN is cleared. necessary for T1CKI to be high for at least 2 TOSC (and If T1SYNC is cleared, then the external clock input is a small RC delay of 20 ns) and low for at least 2 TOSC synchronized with internal phase clocks. The synchro- (and a small RC delay of 20 ns). Refer to Table17-8 in nization is done after the prescaler stage. The the Electrical Specifications Section, timing parameters prescaler stage is an asynchronous ripple-counter. 45, 46 and 47. In this configuration, during Sleep mode, the TMR1 When a prescaler other than 1:1 is used, the external register pair value will not increment even if the clock input is divided by the asynchronous ripple-counter external clock is present, since the synchronization type prescaler so that the prescaler output is symmetri- circuit is shut off. The prescaler however will continue cal. In order for the external clock to meet the sampling to increment. requirement, the ripple-counter must be taken into account. Therefore, it is necessary for T1CKI to have a period of at least 4 TOSC (and a small RC delay of 40 ns) divided by the prescaler value. The only requirement on T1CKI high and low time is that they do not violate the minimum pulse width requirements of 10 ns). Refer to the appropriate electrical specifications in Table17-8, parameters 45, 46 and 47. FIGURE 7-1: TIMER1 BLOCK DIAGRAM Set flag bit TMR1IF on Overflow Synchronized TMR1 0 Clock Input TMR1H TMR1L 1 TMR1ON T1SYNC T1OSC RB6/T1OSO/T1CKI/PGC 1 Synchronize Prescaler T1OSCEN FOSC/4 1, 2, 4, 8 det Enable Internal 0 RB7/T1OSI/PGD Oscillator(1) Clock 2 Sleep Input T1CKPS<1:0> TMR1CS Note 1: When the T1OSCEN bit is cleared, the inverter and feedback resistor are turned off. This eliminates power drain. © 2009 Microchip Technology Inc. DS40044G-page 51

PIC16F627A/628A/648A 7.3 Timer1 Operation in EXAMPLE 7-1: READING A 16-BIT FREE- Asynchronous Counter Mode RUNNING TIMER ; All interrupts are disabled If control bit T1SYNC (T1CON<2>) is set, the external MOVF TMR1H, W ;Read high byte clock input is not synchronized. The timer continues to MOVWF TMPH ; increment asynchronous to the internal phase clocks. MOVF TMR1L, W ;Read low byte The timer will continue to run during Sleep and can MOVWF TMPL ; generate an interrupt on overflow, which will wake-up the MOVF TMR1H, W ;Read high byte processor. However, special precautions in software are SUBWF TMPH, W ;Sub 1st read with needed to read/write the timer (Section7.3.2 “Reading ;2nd read BTFSC STATUS,Z ;Is result = 0 and Writing Timer1 in Asynchronous Counter GOTO CONTINUE ;Good 16-bit read Mode”). ; Note: In Asynchronous Counter mode, Timer1 ; TMR1L may have rolled over between the cannot be used as a time base for capture ; read of the high and low bytes. Reading ; the high and low bytes now will read a good or compare operations. ; value. ; 7.3.1 EXTERNAL CLOCK INPUT TIMING MOVF TMR1H, W ;Read high byte WITH UNSYNCHRONIZED CLOCK MOVWF TMPH ; If control bit T1SYNC is set, the timer will increment MOVF TMR1L, W ;Read low byte completely asynchronously. The input clock must meet MOVWF TMPL ; ; Re-enable the Interrupts (if required) certain minimum high and low time requirements. Refer CONTINUE ;Continue with your to Table17-8 in the Electrical Specifications Section, ;code timing parameters 45, 46 and 47. 7.3.2 READING AND WRITING TIMER1 IN ASYNCHRONOUS COUNTER MODE Reading the TMR1H or TMR1L register, while the timer is running from an external asynchronous clock, will produce a valid read (taken care of in hardware). However, the user should keep in mind that reading the 16-bit timer in two 8-bit values itself poses certain problems since the timer may overflow between the reads. For writes, it is recommended that the user simply stop the timer and write the desired values. A write contention may occur by writing to the timer registers while the register is incrementing. This may produce an unpredictable value in the timer register. Reading the 16-bit value requires some care. Example7-1 is an example routine to read the 16-bit timer value. This is useful if the timer cannot be stopped. DS40044G-page 52 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 7.4 Timer1 Oscillator 7.5 Resetting Timer1 Using a CCP Trigger Output A crystal oscillator circuit is built in between pins T1OSI (input) and T1OSO (amplifier output). It is enabled by If the CCP1 module is configured in Compare mode to setting control bit T1OSCEN (T1CON<3>). It will generate a “special event trigger” (CCP1M<3:0> = continue to run during Sleep. It is primarily intended for 1011), this signal will reset Timer1. a 32.768kHz watch crystal. Table7-1 shows the Note: The special event triggers from the CCP1 capacitor selection for the Timer1 oscillator. module will not set interrupt flag bit The user must provide a software time delay to ensure TMR1IF (PIR1<0>). proper oscillator start-up. Timer1 must be configured for either timer or Synchronized Counter mode to take advantage of this TABLE 7-1: CAPACITOR SELECTION FOR feature. If Timer1 is running in Asynchronous Counter THE TIMER1 OSCILLATOR mode, this Reset operation may not work. Freq C1 C2 In the event that a write to Timer1 coincides with a special event trigger from CCP1, the write will take 32.768kHz 15pF 15pF precedence. Note: These values are for design guidance only. In this mode of operation, the CCPRxH:CCPRxL Consult Application Note AN826 “Crystal register pair effectively becomes the period register for Oscillator Basics and Crystal Selection for Timer1. rfPIC® and PIC® Devices” (DS00826) for further information on Crystal/Capacitor 7.6 Resetting Timer1 Register Pair Selection. (TMR1H, TMR1L) TMR1H and TMR1L registers are not reset to 00h on a POR or any other Reset except by the CCP1 special event triggers (see Section9.2.4 “Special Event Trigger”). T1CON register is reset to 00h on a Power-on Reset or a Brown-out Reset, which shuts off the timer and leaves a 1:1 prescale. In all other Resets, the register is unaffected. 7.7 Timer1 Prescaler The prescaler counter is cleared on writes to the TMR1H or TMR1L registers. TABLE 7-2: REGISTERS ASSOCIATED WITH TIMER1 AS A TIMER/COUNTER Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 0Eh TMR1L Holding Register for the Least Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 0Fh TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 10h T1CON — — T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’. Shaded cells are not used by the Timer1 module. © 2009 Microchip Technology Inc. DS40044G-page 53

PIC16F627A/628A/648A 8.0 TIMER2 MODULE 8.1 Timer2 Prescaler and Postscaler Timer2 is an 8-bit timer with a prescaler and a The prescaler and postscaler counters are cleared postscaler. It can be used as the PWM time base for when any of the following occurs: PWM mode of the CCP module. The TMR2 register is • a write to the TMR2 register readable and writable, and is cleared on any device • a write to the T2CON register Reset. • any device Reset (Power-on Reset, MCLR Reset, The input clock (FOSC/4) has a prescale option of 1:1, Watchdog Timer Reset or Brown-out Reset) 1:4 or 1:16, selected by control bits T2CKPS<1:0> The TMR2 register is not cleared when T2CON is (T2CON<1:0>). written. The Timer2 module has an 8-bit period register PR2. The TMR2 register value increments from 00h until it 8.2 TMR2 Output matches the PR2 register value and then resets to 00h on the next increment cycle. The PR2 register is a The TMR2 output (before the postscaler) is fed to the readable and writable register. The PR2 register is Synchronous Serial Port module which optionally uses initialized to FFh upon Reset. it to generate shift clock. The match output of Timer2 goes through a 4-bit postscaler (which gives a 1:1 to 1:16 scaling inclusive) FIGURE 8-1: TIMER2 BLOCK DIAGRAM to generate a Timer2 interrupt (latched in flag bit TMR2IF, (PIR1<1>)). Sets flag TMR2 bit TMR2IF output Timer2 can be shut off by clearing control bit TMR2ON (T2CON<2>) to minimize power consumption. Reset Prescaler Register8-1 shows the Timer2 control register. TMR2 Reg 1:1, 1:4, 1:16 FOSC/4 Postscaler Comparator 2 1:1 to 1:16 EQ T2CKPS<1:0> 4 PR2 Reg TOUTPS<3:0> DS40044G-page 54 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A REGISTER 8-1: T2CON – TIMER2 CONTROL REGISTER (ADDRESS: 12h) U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 — TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 bit 7 bit 0 bit 7 Unimplemented: Read as ‘0’ bit 6-3 TOUTPS<3:0>: Timer2 Output Postscale Select bits 0000 = 1:1 Postscale Value 0001 = 1:2 Postscale Value • • • 1111 = 1:16 Postscale bit 2 TMR2ON: Timer2 On bit 1 = Timer2 is on 0 = Timer2 is off bit 1-0 T2CKPS<1:0>: Timer2 Clock Prescale Select bits 00 = 1:1 Prescaler Value 01 = 1:4 Prescaler Value 1x = 1:16 Prescaler Value Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown TABLE 8-1: REGISTERS ASSOCIATED WITH TIMER2 AS A TIMER/COUNTER Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 11h TMR2 Timer2 Module’s Register 0000 0000 0000 0000 12h T2CON — TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 -000 0000 92h PR2 Timer2 Period Register 1111 1111 1111 1111 Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’. Shaded cells are not used by the Timer2 module. © 2009 Microchip Technology Inc. DS40044G-page 55

PIC16F627A/628A/648A NOTES: DS40044G-page 56 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 9.0 CAPTURE/COMPARE/PWM TABLE 9-1: CCP MODE – TIMER (CCP) MODULE RESOURCE CCP Mode Timer Resource The CCP (Capture/Compare/PWM) module contains a 16-bit register which can operate as a 16-bit Capture Capture Timer1 register, as a 16-bit Compare register or as a PWM Compare Timer1 master/slave Duty Cycle register. Table9-1 shows the PWM Timer2 timer resources of the CCP module modes. CCP1 Module Capture/Compare/PWM Register1 (CCPR1) is comprised of two 8-bit registers: CCPR1L (low byte) and CCPR1H (high byte). The CCP1CON register controls the operation of CCP1. All are readable and writable. Additional information on the CCP module is available in the “PIC® Mid-Range MCU Family Reference Man- ual” (DS33023). REGISTER 9-1: CCP1CON – CCP OPERATION REGISTER (ADDRESS: 17h) U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 — — CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0 bit 7 bit 0 bit 7-6 Unimplemented: Read as ‘0’ bit 5-4 CCP1X:CCP1Y: PWM Least Significant bits Capture Mode Unused Compare Mode Unused PWM Mode These bits are the two LSbs of the PWM duty cycle. The eight MSbs are found in CCPRxL. bit 3-0 CCP1M<3:0>: CCPx Mode Select bits 0000 = Capture/Compare/PWM off (resets CCP1 module) 0100 = Capture mode, every falling edge 0101 = Capture mode, every rising edge 0110 = Capture mode, every 4th rising edge 0111 = Capture mode, every 16th rising edge 1000 = Compare mode, set output on match (CCP1IF bit is set) 1001 = Compare mode, clear output on match (CCP1IF bit is set) 1010 = Compare mode, generate software interrupt on match (CCP1IF bit is set, CCP1 pin is unaffected) 1011 = Compare mode, trigger special event (CCP1IF bit is set; CCP1 resets TMR1 11xx = PWM mode Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 57

PIC16F627A/628A/648A 9.1 Capture Mode 9.1.4 CCP PRESCALER In Capture mode, CCPR1H:CCPR1L captures the There are four prescaler settings, specified by bits 16-bit value of the TMR1 register when an event occurs CCP1M<3:0>. Whenever the CCP module is turned on pin RB3/CCP1. An event is defined as: off, or the CCP module is not in Capture mode, the prescaler counter is cleared. This means that any • Every falling edge Reset will clear the prescaler counter. • Every rising edge Switching from one capture prescaler to another may • Every 4th rising edge generate an interrupt. Also, the prescaler counter will not • Every 16th rising edge be cleared, therefore the first capture may be from a An event is selected by control bits CCP1M<3:0> non-zero prescaler. Example9-1 shows the (CCP1CON<3:0>). When a capture is made, the recommended method for switching between capture interrupt request flag bit CCP1IF (PIR1<2>) is set. It prescalers. This example also clears the prescaler must be cleared in software. If another capture occurs counter and will not generate the “false” interrupt. before the value in register CCPR1 is read, the old captured value will be lost. EXAMPLE 9-1: CHANGING BETWEEN CAPTURE PRESCALERS 9.1.1 CCP PIN CONFIGURATION CLRF CCP1CON ;Turn CCP module off In Capture mode, the RB3/CCP1 pin should be config- MOVLW NEW_CAPT_PS;Load the W reg with ured as an input by setting the TRISB<3> bit. ; the new prescaler ; mode value and CCP ON Note: If the RB3/CCP1 is configured as an MOVWF CCP1CON ;Load CCP1CON with this output, a write to the port can cause a ; value capture condition. 9.2 Compare Mode FIGURE 9-1: CAPTURE MODE OPERATION BLOCK In Compare mode, the 16-bit CCPR1 register value is DIAGRAM constantly compared against the TMR1 register pair value. When a match occurs, the RB3/CCP1 pin is: Set flag bit CCP1IF Prescaler (PIR1<2>) • Driven high ³ 1, 4, 16 • Driven low RB3/CCP1 CCPR1H CCPR1L • Remains unchanged pin The action on the pin is based on the value of control and Capture edge detect Enable bits CCP1M<3:0> (CCP1CON<3:0>). At the same time, interrupt flag bit CCP1IF is set. TMR1H TMR1L CCP1CON<3:0> FIGURE 9-2: COMPARE MODE Q’s OPERATION BLOCK DIAGRAM 9.1.2 TIMER1 MODE SELECTION Timer1 must be running in Timer mode or Synchro- Set flag bit CCP1IF (PIR1<2>) nized Counter mode for the CCP module to use the CCPR1H CCPR1L capture feature. In Asynchronous Counter mode, the capture operation may not work. Q S Output RB3/CCP1 R Logic match Comparator 9.1.3 SOFTWARE INTERRUPT pin TRISB<3> TMR1H TMR1L When the Capture mode is changed, a false capture Output Enable CCP1CON<3:0> Mode Select interrupt may be generated. The user should keep bit CCP1IE (PIE1<2>) clear to avoid false interrupts and Note: Special event trigger will reset Timer1, but not should clear the flag bit CCP1IF following any such set interrupt flag bit TMR1IF (PIR1<0>). change in Operating mode. DS40044G-page 58 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 9.2.1 CCP PIN CONFIGURATION 9.2.4 SPECIAL EVENT TRIGGER The user must configure the RB3/CCP1 pin as an In this mode (CCP1M<3:0>=1011), an internal hard- output by clearing the TRISB<3> bit. ware trigger is generated, which may be used to initiate an action. See Register9-1. Note: Clearing the CCP1CON register will force the RB3/CCP1 compare output latch to The special event trigger output of the CCP occurs the default low level. This is not the data immediately upon a match between the TMR1H, latch. TMR1L register pair and CCPR1H, CCPR1L register pair. The TMR1H, TMR1L register pair is not reset until 9.2.2 TIMER1 MODE SELECTION the next rising edge of the TMR1 clock. This allows the CCPR1 register pair to effectively be a 16-bit program- Timer1 must be running in Timer mode or Synchro- mable period register for Timer1. The special event nized Counter mode if the CCP module is using the trigger output also starts an A/D conversion provided compare feature. In Asynchronous Counter mode, the that the A/D module is enabled. compare operation may not work. Note: Removing the match condition by chang- 9.2.3 SOFTWARE INTERRUPT MODE ing the contents of the CCPR1H, CCPR1L When generate software interrupt is chosen the CCP1 register pair between the clock edge that pin is not affected. Only a CCP interrupt is generated (if generates the special event trigger and enabled). the clock edge that generates the TMR1 Reset will preclude the Reset from occuring. TABLE 9-2: REGISTERS ASSOCIATED WITH CAPTURE, COMPARE, AND TIMER1 Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 86h, 186h TRISB PORTB Data Direction Register 1111 1111 1111 1111 0Eh TMR1L Holding Register for the Least Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 0Fh TMR1H Holding Register for the Most Significant Byte of the 16-bit TMR1 Register xxxx xxxx uuuu uuuu 10h T1CON — — T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu 15h CCPR1L Capture/Compare/PWM Register1 (LSB) xxxx xxxx uuuu uuuu 16h CCPR1H Capture/Compare/PWM Register1 (MSB) xxxx xxxx uuuu uuuu 17h CCP1CON — — CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000 Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’. Shaded cells are not used by Capture and Timer1. © 2009 Microchip Technology Inc. DS40044G-page 59

PIC16F627A/628A/648A 9.3 PWM Mode A PWM output (Figure9-4) has a time base (period) and a time that the output stays high (duty cycle). The In Pulse Width Modulation (PWM) mode, the CCP1 pin frequency of the PWM is the inverse of the period produces up to a 10-bit resolution PWM output. Since (frequency = 1/period). the CCP1 pin is multiplexed with the PORTB data latch, the TRISB<3> bit must be cleared to make the CCP1 FIGURE 9-4: PWM OUTPUT pin an output. Note: Clearing the CCP1CON register will force Period the CCP1 PWM output latch to the default low level. This is not the PORTB I/O data latch. Figure9-3 shows a simplified block diagram of the Duty Cycle CCP module in PWM mode. TMR2 = PR2 For a step by step procedure on how to set up the CCP module for PWM operation, see Section9.3.3 “Set- TMR2 = Duty Cycle Up for PWM Operation”. TMR2 = PR2 FIGURE 9-3: SIMPLIFIED PWM BLOCK 9.3.1 PWM PERIOD DIAGRAM The PWM period is specified by writing to the PR2 Duty cycle registers CCP1CON<5:4> register. The PWM period can be calculated using the following formula: CCPR1L PWM period = [(PR2)+1]⋅4⋅ Tosc⋅TMR2 prescale value CCPR1H (Slave) PWM frequency is defined as 1/[PWM period]. When TMR2 is equal to PR2, the following three events Comparator R Q occur on the next increment cycle: RB3/CCP1 • TMR2 is cleared TMR2 (1) • The CCP1 pin is set (exception: if PWM duty S cycle=0%, the CCP1 pin will not be set) Comparator TRISB<3> • The PWM duty cycle is latched from CCPR1L into Clear Timer, CCPR1H CCP1 pin and latch D.C. PR2 Note: The Timer2 postscaler (see Section8.0 “Timer2 Module”) is not used in the Note 1: 8-bit timer is concatenated with 2-bit internal Q clock or 2 bits of the prescaler to create 10-bit determination of the PWM frequency. The time base. postscaler could be used to have a servo update rate at a different frequency than the PWM output. DS40044G-page 60 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 9.3.2 PWM DUTY CYCLE Maximum PWM resolution (bits) for a given PWM frequency: The PWM duty cycle is specified by writing to the CCPR1L register and to the CCP1CON<5:4> bits. Up ⎛ Fosc ⎞ to 10-bit resolution is available: the CCPR1L contains PWM log⎝F----P----W----M-----×------T---M-----R---2--- --P----r--e---s--c---a---l-e---r-⎠ the eight MSbs and the CCP1CON<5:4> contains the Resolution = --------------------------------------------------------------------------- bits log(2) two LSbs. This 10-bit value is represented by CCPR1L:CCP1CON<5:4>. The following equation is used to calculate the PWM duty cycle in time: Note: If the PWM duty cycle value is longer than PWM duty cycle = the PWM period the CCP1 pin will not be cleared. (CCPR1L:CCP1CON<5:4>)⋅Tosc⋅TMR2 prescale For an example PWM period and duty cycle value calculation, see the PIC® Mid-Range Reference Man- ual (DS33023). CCPR1L and CCP1CON<5:4> can be written to at any time, but the duty cycle value is not latched into 9.3.3 SET-UP FOR PWM OPERATION CCPR1H until after a match between PR2 and TMR2 The following steps should be taken when configuring occurs (i.e., the period is complete). In PWM mode, the CCP module for PWM operation: CCPR1H is a read-only register. 1. Set the PWM period by writing to the PR2 The CCPR1H register and a 2-bit internal latch are register. used to double buffer the PWM duty cycle. This double buffering is essential for glitchless PWM operation. 2. Set the PWM duty cycle by writing to the CCPR1L register and CCP1CON<5:4> bits. When the CCPR1H and 2-bit latch match TMR2 3. Make the CCP1 pin an output by clearing the concatenated with an internal 2-bit Q clock or 2 bits of TRISB<3> bit. the TMR2 prescaler, the CCP1 pin is cleared. 4. Set the TMR2 prescale value and enable Timer2 by writing to T2CON. TABLE 9-3: EXAMPLE PWM FREQUENCIES AND RESOLUTIONS AT 20 MHz PWM Frequency 1.22 kHz 4.88 kHz 19.53 kHz 78.12 kHz 156.3 kHz 208.3 kHz Timer Prescaler (1, 4, 16) 16 4 1 1 1 1 PR2 Value 0xFF 0xFF 0xFF 0x3F 0x1F 0x17 Maximum Resolution (bits) 10 10 10 8 7 6.5 TABLE 9-4: REGISTERS ASSOCIATED WITH PWM AND TIMER2 Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 86h, 186h TRISB TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 1111 1111 11h TMR2 Timer2 Module’s Register 0000 0000 0000 0000 92h PR2 Timer2 Module’s Period Register 1111 1111 1111 1111 12h T2CON — TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 uuuu uuuu 15h CCPR1L Capture/Compare/PWM Register 1 (LSB) xxxx xxxx uuuu uuuu 16h CCPR1H Capture/Compare/PWM Register 1 (MSB) xxxx xxxx uuuu uuuu 17h CCP1CON — — CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000 Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’. Shaded cells are not used by PWM and Timer2. © 2009 Microchip Technology Inc. DS40044G-page 61

PIC16F627A/628A/648A NOTES: DS40044G-page 62 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 10.0 COMPARATOR MODULE The CMCON register, shown in Register10-1, controls the comparator input and output multiplexers. A block The comparator module contains two analog diagram of the comparator is shown in Figure10-1. comparators. The inputs to the comparators are multiplexed with the RA0 through RA3 pins. The on-chip Voltage Reference (Section11.0 “Voltage Reference Module”) can also be an input to the comparators. REGISTER 10-1: CMCON – COMPARATOR CONFIGURATION REGISTER (ADDRESS: 01Fh) R-0 R-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 C2OUT C1OUT C2INV C1INV CIS CM2 CM1 CM0 bit 7 bit 0 bit 7 C2OUT: Comparator 2 Output bit When C2INV = 0: 1 = C2 VIN+ > C2 VIN- 0 = C2 VIN+ < C2 VIN- When C2INV = 1: 1 = C2 VIN+ < C2 VIN- 0 = C2 VIN+ > C2 VIN- bit 6 C1OUT: Comparator 1 Output bit When C1INV = 0: 1 = C1 VIN+ > C1 VIN- 0 = C1 VIN+ < C1 VIN- When C1INV = 1: 1 = C1 VIN+ < C1 VIN- 0 = C1 VIN+ > C1 VIN- bit 5 C2INV: Comparator 2 Output Inversion bit 1 = C2 Output inverted 0 = C2 Output not inverted bit 4 C1INV: Comparator 1 Output Inversion bit 1 = C1 Output inverted 0 = C1 Output not inverted bit 3 CIS: Comparator Input Switch bit When CM<2:0>: = 001 Then: 1 = C1 VIN- connects to RA3 0 = C1 VIN- connects to RA0 When CM<2:0> = 010 Then: 1 = C1 VIN- connects to RA3 C2 VIN- connects to RA2 0 = C1 VIN- connects to RA0 C2 VIN- connects to RA1 bit 2-0 CM<2:0>: Comparator Mode bits Figure10-1 shows the comparator modes and CM<2:0> bit settings Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 63

PIC16F627A/628A/648A 10.1 Comparator Configuration If the Comparator mode is changed, the comparator output level may not be valid for the specified mode There are eight modes of operation for the change delay shown in Table17-2. comparators. The CMCON register is used to select the mode. Figure10-1 shows the eight possible Note1: Comparator interrupts should be disabled during a Comparator mode change, modes. The TRISA register controls the data direction of the comparator pins for each mode. otherwise a false interrupt may occur. 2: Comparators can have an inverted output. See Figure10-1. FIGURE 10-1: COMPARATOR I/O OPERATING MODES Comparators Off Comparators Reset (POR Default Value) CM<2:0> = 000 CM<2:0> = 111 RA0/AN0 D VIN- RA0/AN0 A VIN- RA3/AN3/CMP1 A VIN+ C1 Off (Read as ‘0’) RA3/AN3/CMP1 D VIN+ C1 Off (Read as ‘0’) RA1/AN1 A VIN- RA1/AN1 D VIN- RA2/AN2/VREF A VIN+ C2 Off (Read as ‘0’) RA2/AN2/VREF D VIN+ C2 Off (Read as ‘0’) VSS Four Inputs Multiplexed to Two Comparators Two Independent Comparators CM<2:0> = 010 CM<2:0> = 100 A RA0/AN0 RA0/AN0 A VIN- CIS = 0 VIN- RA3/AN3/CMP1 A VIN+ C1 C1VOUT RA3/AN3/CMP1 A CIS = 1 VIN+ C1 C1VOUT A RA1/AN1 CIS = 0 VIN- RA1/AN1 A VIN- RA2/AN2/VREF A CIS = 1 VIN+ C2 C2VOUT RA2/AN2/VREF A VIN+ C2 C2VOUT From VREF Module Two Common Reference Comparators Two Common Reference Comparators with Outputs CM<2:0> = 011 CM<2:0> = 110 A VIN- RA0/AN0 A VIN- RA0/AN0 D VIN+ C1 C1VOUT RA3/AN3/CMP1 D VIN+ C1 C1VOUT RA3/AN3/CMP1 RA1/AN1 A VIN- RA1/AN1 A VIN- RA2/AN2/VREF A VIN+ C2 C2VOUT RA2/AN2/VREF A VIN+ C2 C2VOUT Open Drain RA4/T0CKI/CMP2 One Independent Comparator Three Inputs Multiplexed to Two Comparators CM<2:0> = 101 CM<2:0> = 001 RA0/AN0 D VIN- RA0/AN0 A RA3/AN3/CMP1 D VIN+ C1 Off (Read as ‘0’) RA3/AN3/CMP1 A CCIISS == 01 VVIINN-+ C1 C1VOUT VSS RA1/AN1 A VIN- RA1/AN1 A VIN- RA2/AN2/VREF A VIN+ C2 C2VOUT RA2/AN2/VREF A VIN+ C2 C2VOUT A = Analog Input, port reads zeros always. D = Digital Input. CIS (CMCON<3>) is the Comparator Input Switch. DS40044G-page 64 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A The code example in Example10-1 depicts the steps FIGURE 10-2: SINGLE COMPARATOR required to configure the Comparator module. RA3 and RA4 are configured as digital output. RA0 and RA1 are VIN+ + configured as the V- inputs and RA2 as the V+ input to Result both comparators. VIN- – EXAMPLE 10-1: INITIALIZING COMPARATOR MODULE FLAG_REG EQU 0X20 CLRF FLAG_REG ;Init flag register VIN- CLRF PORTA ;Init PORTA MOVF CMCON, W ;Load comparator bits ANDLW 0xC0 ;Mask comparator bits VIN+ IORWF FLAG_REG,F ;Store bits in flag register MOVLW 0x03 ;Init comparator mode MOVWF CMCON ;CM<2:0> = 011 BSF STATUS,RP0 ;Select Bank1 MOVLW 0x07 ;Initialize data direction MOVWF TRISA ;Set RA<2:0> as inputs Result ;RA<4:3> as outputs ;TRISA<7:5> always read ‘0’ BCF STATUS,RP0 ;Select Bank 0 CALL DELAY10 ;10Μs delay 10.3.1 EXTERNAL REFERENCE SIGNAL MOVF CMCON,F ;Read CMCON to end change ;condition When external voltage references are used, the BCF PIR1,CMIF ;Clear pending interrupts Comparator module can be configured to have the BSF STATUS,RP0 ;Select Bank 1 comparators operate from the same or different BSF PIE1,CMIE ;Enable comparator interrupts BCF STATUS,RP0 ;Select Bank 0 reference sources. However, threshold detector BSF INTCON,PEIE;Enable peripheral interrupts applications may require the same reference. The BSF INTCON,GIE ;Global interrupt enable reference signal must be between VSS and VDD, and can be applied to either pin of the comparator(s). 10.2 Comparator Operation 10.3.2 INTERNAL REFERENCE SIGNAL A single comparator is shown in Figure10-2 along with The Comparator module also allows the selection of an the relationship between the analog input levels and internally generated voltage reference for the the digital output. When the analog input at VIN+ is less comparators. Section11.0 “Voltage Reference than the analog input VIN-, the output of the comparator Module”, contains a detailed description of the Voltage is a digital low level. When the analog input at VIN+ is Reference module that provides this signal. The greater than the analog input VIN-, the output of the internal reference signal is used when the comparators comparator is a digital high level. The shaded areas of are in mode CM<2:0>=010 (Figure10-1). In this the output of the comparator in Figure10-2 represent mode, the internal voltage reference is applied to the the uncertainty due to input offsets and response time. See Table17-2 for Common Mode voltage. VIN+ pin of both comparators. 10.4 Comparator Response Time 10.3 Comparator Reference Response time is the minimum time, after selecting a An external or internal reference signal may be used new reference voltage or input source, before the depending on the comparator Operating mode. The comparator output is to have a valid level. If the internal analog signal that is present at VIN- is compared to the reference is changed, the maximum delay of the internal signal at VIN+, and the digital output of the comparator voltage reference must be considered when using the is adjusted accordingly (Figure10-2). comparator outputs. Otherwise, the maximum delay of the comparators should be used (Table17-2, page 142). © 2009 Microchip Technology Inc. DS40044G-page 65

PIC16F627A/628A/648A 10.5 Comparator Outputs The comparator outputs are read through the CMCON register. These bits are read-only. The comparator outputs may also be directly output to the RA3 and RA4 I/O pins. When the CM<2:0> = 110 or 001, multiplexors in the output path of the RA3 and RA4/T0CK1/CMP2 pins will switch and the output of each pin will be the unsynchronized output of the comparator. The uncertainty of each of the comparators is related to the input offset voltage and the response time given in the specifications. Figure10-3 shows the comparator output block diagram. The TRISA bits will still function as an output enable/ disable for the RA3/AN3/CMP1 and RA4/T0CK1/ CMP2 pins while in this mode. Note1: When reading the PORT register, all pins configured as analog inputs will read as a ‘0’. Pins configured as digital inputs will convert an analog input, according to the Schmitt Trigger input specification. 2: Analog levels on any pin that is defined as a digital input may cause the input buffer to consume more current than is specified. FIGURE 10-3: MODIFIED COMPARATOR OUTPUT BLOCK DIAGRAM CnINV To RA3/AN3/CMP1 or RA4/T0CK1/CMP2 pin CnVOUT To Data Bus Q D CMCON<7:6> Q3 EN RD CMCON Set CMIF bit Q D EN Q1 CL From other Comparator Reset DS40044G-page 66 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 10.6 Comparator Interrupts 10.7 Comparator Operation During Sleep The comparator interrupt flag is set whenever there is a change in the output value of either comparator. When a comparator is active and the device is placed Software will need to maintain information about the in Sleep mode, the comparator remains active and the status of the output bits, as read from CMCON<7:6>, to interrupt is functional if enabled. This interrupt will determine the actual change that has occurred. The wake-up the device from Sleep mode when enabled. CMIF bit, PIR1<6>, is the comparator interrupt flag. While the comparator is powered-up, higher Sleep The CMIF bit must be reset by clearing ‘0’. Since it is currents than shown in the power-down current also possible to write a ‘1’ to this register, a simulated specification will occur. Each comparator that is interrupt may be initiated. operational will consume additional current as shown in The CMIE bit (PIE1<6>) and the PEIE bit the comparator specifications. To minimize power (INTCON<6>) must be set to enable the interrupt. In consumption while in Sleep mode, turn off the addition, the GIE bit must also be set. If any of these comparators, CM<2:0>=111, before entering Sleep. If bits are clear, the interrupt is not enabled, though the the device wakes up from Sleep, the contents of the CMIF bit will still be set if an interrupt condition occurs. CMCON register are not affected. Note: If a change in the CMCON register 10.8 Effects of a Reset (C1OUT or C2OUT) should occur when a read operation is being executed (start of A device Reset forces the CMCON register to its Reset the Q2 cycle), then the CMIF (PIR1<6>) state. This forces the Comparator module to be in the interrupt flag may not get set. comparator Reset mode, CM<2:0>=000. This ensures that all potential inputs are analog inputs. Device current The user, in the interrupt service routine, can clear the is minimized when analog inputs are present at Reset interrupt in the following manner: time. The comparators will be powered-down during the a) Any write or read of CMCON. This will end the Reset interval. mismatch condition. b) Clear flag bit CMIF. 10.9 Analog Input Connection A mismatch condition will continue to set flag bit CMIF. Considerations Reading CMCON will end the mismatch condition and allow flag bit CMIF to be cleared. A simplified circuit for an analog input is shown in Figure10-4. Since the analog pins are connected to a digital output, they have reverse biased diodes to VDD and VSS. The analog input therefore, must be between VSS and VDD. If the input voltage deviates from this range by more than 0.6V in either direction, one of the diodes is forward biased and a latch-up may occur. A maximum source impedance of 10kΩ is recommended for the analog sources. Any external component connected to an analog input pin, such as a capacitor or a Zener diode, should have very little leakage current. © 2009 Microchip Technology Inc. DS40044G-page 67

PIC16F627A/628A/648A FIGURE 10-4: ANALOG INPUT MODE VDD RS < 10K VT = 0.6V RIC AIN VA C5PpIFN VT = 0.6V I±L5E0A0KAnGAE VSS Legend: CPIN = Input Capacitance VT = Threshold Voltage ILEAKAGE = Leakage Current at the Pin RIC = Interconnect Resistance RS = Source Impedance VA = Analog Voltage TABLE 10-1: REGISTERS ASSOCIATED WITH COMPARATOR MODULE Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Other POR Resets 1Fh CMCON C2OUT C1OUT C2INV C1NV CIS CM2 CM1 CM0 0000 0000 0000 0000 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 85h TRISA TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 1111 1111 1111 1111 Legend: x = Unknown, u = Unchanged, - = Unimplemented, read as ‘0’ DS40044G-page 68 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 11.0 VOLTAGE REFERENCE The equations used to calculate the output of the MODULE Voltage Reference module are as follows: if VRR = 1: The Voltage Reference module consists of a 16-tap resistor ladder network that provides a selectable volt- VREF = V----R----<----3---:--0--->---×VDD 24 age reference. The resistor ladder is segmented to pro- vide two ranges of VREF values and has a power-down if VRR = 0: function to conserve power when the reference is not being used. The VRCON register controls the opera- ⎛ 1⎞ VR<3:0> VREF = VDD×--- +-----------------------×VDD tion of the reference as shown in Figure11-1. The ⎝ 4⎠ 32 block diagram is given in Figure11-1. The setting time of the Voltage Reference module must be considered when changing the VREF output 11.1 Voltage Reference Configuration (Table17-3). Example11-1 demonstrates how voltage reference is configured for an output voltage of 1.25V The Voltage Reference module can output 16 distinct voltage levels for each range. with VDD = 5.0V. REGISTER 11-1: VRCON – VOLTAGE REFERENCE CONTROL REGISTER (ADDRESS: 9Fh) R/W-0 R/W-0 R/W-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 VREN VROE VRR — VR3 VR2 VR1 VR0 bit 7 bit 0 bit 7 VREN: VREF Enable bit 1 = VREF circuit powered on 0 = VREF circuit powered down, no IDD drain bit 6 VROE: VREF Output Enable bit 1 = VREF is output on RA2 pin 0 = VREF is disconnected from RA2 pin bit 5 VRR: VREF Range Selection bit 1 = Low range 0 = High range bit 4 Unimplemented: Read as ‘0’ bit 3-0 VR<3:0>: VREF Value Selection bits 0 ≤ VR <3:0> ≤ 15 When VRR = 1: VREF = (VR<3:0>/ 24) * VDD When VRR = 0: VREF = 1/4 * VDD + (VR<3:0>/ 32) * VDD Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 69

PIC16F627A/628A/648A FIGURE 11-1: VOLTAGE REFERENCE BLOCK DIAGRAM VDD 16 Stages VREN 8R R R R R 8R VRR VSS VSS VR3 VREF 16-1 Analog Mux (From VRCON<3:0>) VR0 Note: R is defined in Table17-3. EXAMPLE 11-1: VOLTAGE REFERENCE 11.5 Connection Considerations CONFIGURATION The Voltage Reference module operates independently MOVLW 0x02 ;4 Inputs Muxed of the Comparator module. The output of the reference MOVWF CMCON ;to 2 comps. generator may be connected to the RA2 pin if the BSF STATUS,RP0 ;go to Bank 1 TRISA<2> bit is set and the VROE bit, VRCON<6>, is MOVLW 0x07 ;RA3-RA0 are MOVWF TRISA ;outputs set. Enabling the Voltage Reference module output onto MOVLW 0xA6 ;enable VREF the RA2 pin with an input signal present will increase MOVWF VRCON ;low range set VR<3:0>=6 current consumption. Connecting RA2 as a digital output BCF STATUS,RP0 ;go to Bank 0 with VREF enabled will also increase current consump- CALL DELAY10 ;10μs delay tion. The RA2 pin can be used as a simple D/A output with 11.2 Voltage Reference Accuracy/Error limited drive capability. Due to the limited drive capability, a buffer must be used in conjunction with the The full range of VSS to VDD cannot be realized due to Voltage Reference module output for external connec- the construction of the module. The transistors on the tions to VREF. Figure11-2 shows an example buffering top and bottom of the resistor ladder network technique. (Figure11-1) keep VREF from approaching VSS or VDD. The Voltage Reference module is VDD derived and therefore, the VREF output changes with fluctuations in VDD. The tested absolute accuracy of the Voltage Ref- erence module can be found in Table17-3. 11.3 Operation During Sleep When the device wakes up from Sleep through an interrupt or a Watchdog Timer time out, the contents of the VRCON register are not affected. To minimize current consumption in Sleep mode, the Voltage Reference module should be disabled. 11.4 Effects of a Reset A device Reset disables the Voltage Reference module by clearing bit VREN (VRCON<7>). This Reset also disconnects the reference from the RA2 pin by clearing bit VROE (VRCON<6>) and selects the high voltage range by clearing bit VRR (VRCON<5>). The VREF value select bits, VRCON<3:0>, are also cleared. DS40044G-page 70 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 11-2: VOLTAGE REFERENCE OUTPUT BUFFER EXAMPLE R(1) RA2 Op Amp VREF + Module VREF Output Voltage Reference Output Impedance Note 1: R is dependent upon the voltage reference configuration VRCON<3:0> and VRCON<5>. TABLE 11-1: REGISTERS ASSOCIATED WITH VOLTAGE REFERENCE Value On Value On Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Other POR Resets 9Fh VRCON VREN VROE VRR — VR3 VR2 VR1 VR0 000- 0000 000- 0000 1Fh CMCON C2OUT C1OUT C2INV C1INV CIS CM2 CM1 CM0 0000 0000 0000 0000 85h TRISA TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0 1111 1111 1111 1111 Legend: - = Unimplemented, read as ‘0’. © 2009 Microchip Technology Inc. DS40044G-page 71

PIC16F627A/628A/648A NOTES: DS40044G-page 72 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 12.0 UNIVERSAL SYNCHRONOUS The USART can be configured in the following modes: ASYNCHRONOUS RECEIVER • Asynchronous (full-duplex) TRANSMITTER (USART) • Synchronous – Master (half-duplex) MODULE • Synchronous – Slave (half-duplex) Bit SPEN (RCSTA<7>) and bits TRISB<2:1> have to be The Universal Synchronous Asynchronous Receiver set in order to configure pins RB2/TX/CK and RB1/RX/DT Transmitter (USART) is also known as a Serial as the Universal Synchronous Asynchronous Receiver Communications Interface (SCI). The USART can be Transmitter. configured as a full-duplex asynchronous system that can communicate with peripheral devices such as CRT Register12-1 shows the Transmit Status and Control terminals and personal computers, or it can be Register (TXSTA) and Register12-2 shows the configured as a half-duplex synchronous system that Receive Status and Control Register (RCSTA). can communicate with peripheral devices such as A/D or D/A integrated circuits, Serial EEPROMs, etc. REGISTER 12-1: TXSTA – TRANSMIT STATUS AND CONTROL REGISTER (ADDRESS: 98h) R/W-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 R-1 R/W-0 CSRC TX9 TXEN SYNC — BRGH TRMT TX9D bit 7 bit 0 bit 7 CSRC: Clock Source Select bit Asynchronous mode Don’t care Synchronous mode 1 = Master mode (Clock generated internally from BRG) 0 = Slave mode (Clock from external source) bit 6 TX9: 9-bit Transmit Enable bit 1 = Selects 9-bit transmission 0 = Selects 8-bit transmission bit 5 TXEN: Transmit Enable bit(1) 1 = Transmit enabled 0 = Transmit disabled bit 4 SYNC: USART Mode Select bit 1 = Synchronous mode 0 = Asynchronous mode bit 3 Unimplemented: Read as ‘0’ bit 2 BRGH: High Baud Rate Select bit Asynchronous mode 1 = High speed 0 = Low speed Synchronous mode Unused in this mode bit 1 TRMT: Transmit Shift Register Status bit 1 = TSR empty 0 = TSR full bit 0 TX9D: 9th bit of transmit data. Can be parity bit. Note1: SREN/CREN overrides TXEN in SYNC mode. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 73

PIC16F627A/628A/648A REGISTER 12-2: RCSTA – RECEIVE STATUS AND CONTROL REGISTER (ADDRESS: 18h) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R-0 R-0 R-x SPEN RX9 SREN CREN ADEN FERR OERR RX9D bit 7 bit 0 bit 7 SPEN: Serial Port Enable bit (Configures RB1/RX/DT and RB2/TX/CK pins as serial port pins when bits TRISB<2:1> are set) 1 = Serial port enabled 0 = Serial port disabled bit 6 RX9: 9-bit Receive Enable bit 1 = Selects 9-bit reception 0 = Selects 8-bit reception bit 5 SREN: Single Receive Enable bit Asynchronous mode: Don’t care Synchronous mode - master: 1 = Enables single receive 0 = Disables single receive This bit is cleared after reception is complete. Synchronous mode - slave: Unused in this mode bit 4 CREN: Continuous Receive Enable bit Asynchronous mode: 1 = Enables continuous receive 0 = Disables continuous receive Synchronous mode: 1 = Enables continuous receive until enable bit CREN is cleared (CREN overrides SREN) 0 = Disables continuous receive bit 3 ADEN: Address Detect Enable bit Asynchronous mode 9-bit (RX9 = 1): 1 = Enables address detection, enable interrupt and load of the receive buffer when RSR<8> is set 0 = Disables address detection, all bytes are received, and ninth bit can be used as parity bit Asynchronous mode 8-bit (RX9 = 0): Unused in this mode Synchronous mode Unused in this mode bit 2 FERR: Framing Error bit 1 = Framing error (Can be updated by reading RCREG register and receive next valid byte) 0 = No framing error bit 1 OERR: Overrun Error bit 1 = Overrun error (Can be cleared by clearing bit CREN) 0 = No overrun error bit 0 RX9D: 9th bit of received data (Can be parity bit) Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 74 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 12.1 USART Baud Rate Generator EQUATION 12-1: CALCULATING BAUD (BRG) RATE ERROR The BRG supports both the Asynchronous and Fosc Desired Baud Rate = ----------------------- Synchronous modes of the USART. It is a dedicated 64(x+1) 8-bit baud rate generator. The SPBRG register controls the period of a free running 8-bit timer. In 16000000 Asynchronous mode, bit BRGH (TXSTA<2>) also 9600 = ------------------------ 64(x+1) controls the baud rate. In Synchronous mode, bit BRGH is ignored. Table12-1 shows the formula for computation of the baud rate for different USART x = 25.042 modes, which only apply in Master mode (internal clock). 16000000 Calculated Baud Rate = --------------------------- = 9615 Given the desired baud rate and FOSC, the nearest 64(25+1) integer value for the SPBRG register can be calculated using the formula in Table12-1. From this, the error in baud rate can be determined. (Calculated Baud Rate - Desired Baud Rate) Error = ----------------------------------------------------------------------------------------------------------- Example12-1 shows the calculation of the baud rate Desired Baud Rate error for the following conditions: 9615–9600 FOSC = 16 MHz = ------------------------------ = 0.16% 9600 Desired Baud Rate = 9600 BRGH = 0 It may be advantageous to use the high baud rate SYNC = 0 (BRGH = 1) even for slower baud clocks. This is because the FOSC/(16(X + 1)) equation can reduce the baud rate error in some cases. Writing a new value to the SPBRG register causes the BRG timer to be reset (or cleared) and ensures the BRG does not wait for a timer overflow before outputting the new baud rate. The data on the RB1/RX/DT pin is sampled three times by a majority detect circuit to determine if a high or a low level is present at the RX pin. TABLE 12-1: BAUD RATE FORMULA SYNC BRGH = 0 (Low Speed) BRGH = 1 (High Speed) 0 (Asynchronous) Baud Rate = FOSC/(64(X+1)) Baud Rate=FOSC/(16(X+1)) 1 (Synchronous) Baud Rate = FOSC/(4(X+1)) NA Legend: X = value in SPBRG (0 to 255) TABLE 12-2: REGISTERS ASSOCIATED WITH BAUD RATE GENERATOR Value on Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR other Resets 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented read as ‘0’. Shaded cells are not used for the BRG. © 2009 Microchip Technology Inc. DS40044G-page 75

PIC16F627A/628A/648A TABLE 12-3: BAUD RATES FOR SYNCHRONOUS MODE FOSC = 20 MHz SPBRG 16 MHz SPBRG 10 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 NA — — NA — — NA — — 1.2 NA — — NA — — NA — — 2.4 NA — — NA — — NA — — 9.6 NA — — NA — — 9.766 +1.73% 255 19.2 19.53 +1.73% 255 19.23 +0.16% 207 19.23 +0.16% 129 76.8 76.92 +0.16% 64 76.92 +0.16% 51 75.76 -1.36% 32 96 96.15 +0.16% 51 95.24 -0.79% 41 96.15 +0.16% 25 300 294.1 -1.96 16 307.69 +2.56% 12 312.5 +4.17% 7 500 500 0 9 500 0 7 500 0 4 HIGH 5000 — 0 4000 — 0 2500 — 0 LOW 19.53 — 255 15.625 — 255 9.766 — 255 FOSC = 7.15909 MHz SPBRG 5.0688 MHz SPBRG 4 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 NA — — NA — — NA — — 1.2 NA — — NA — — NA — — 2.4 NA — — NA — — NA — — 9.6 9.622 +0.23% 185 9.6 0 131 9.615 +0.16% 103 19.2 19.24 +0.23% 92 19.2 0 65 19.231 +0.16% 51 76.8 77.82 +1.32 22 79.2 +3.13% 15 75.923 +0.16% 12 96 94.20 -1.88 18 97.48 +1.54% 12 1000 +4.17% 9 300 298.3 -0.57 5 316.8 5.60% 3 NA — — 500 NA — — NA — — NA — — HIGH 1789.8 — 0 1267 — 0 100 — 0 LOW 6.991 — 255 4.950 — 255 3.906 — 255 FOSC = 3.579545 MHz SPBRG 1 MHz SPBRG 32.768 kHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 NA — — NA — — 0.303 +1.14% 26 1.2 NA — — 1.202 +0.16% 207 1.170 -2.48% 6 2.4 NA — — 2.404 +0.16% 103 NA — — 9.6 9.622 +0.23% 92 9.615 +0.16% 25 NA — — 19.2 19.04 -0.83% 46 19.24 +0.16% 12 NA — — 76.8 74.57 -2.90% 11 83.34 +8.51% 2 NA — — 96 99.43 +3.57% 8 NA — — NA — — 300 298.3 0.57% 2 NA — — NA — — 500 NA — — NA — — NA — — HIGH 894.9 — 0 250 — 0 8.192 — 0 LOW 3.496 — 255 0.9766 — 255 0.032 — 255 DS40044G-page 76 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 12-4: BAUD RATES FOR ASYNCHRONOUS MODE (BRGH = 0) FOSC = 20 MHz SPBRG 16 MHz SPBRG 10 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 NA — — NA — — NA — — 1.2 1.221 +1.73% 255 1.202 +0.16% 207 1.202 +0.16% 129 2.4 2.404 +0.16% 129 2.404 +0.16% 103 2.404 +0.16% 64 9.6 9.469 -1.36% 32 9.615 +0.16% 25 9.766 +1.73% 15 19.2 19.53 +1.73% 15 19.23 +0.16% 12 19.53 +1.73V 7 76.8 78.13 +1.73% 3 83.33 +8.51% 2 78.13 +1.73% 1 96 104.2 +8.51% 2 NA — — NA — — 300 312.5 +4.17% 0 NA — — NA — — 500 NA — — NA — — NA — — HIGH 312.5 — 0 250 — 0 156.3 — 0 LOW 1.221 — 255 0.977 — 255 0.6104 — 255 FOSC = 7.15909 MHz SPBRG 5.0688 MHz SPBRG 4 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 NA — — 0.31 +3.13% 255 0.3005 -0.17% 207 1.2 1.203 +0.23% 92 1.2 0 65 1.202 +1.67% 51 2.4 2.380 -0.83% 46 2.4 0 32 2.404 +1.67% 25 9.6 9.322 -2.90% 11 9.9 +3.13% 7 NA — — 19.2 18.64 -2.90% 5 19.8 +3.13% 3 NA — — 76.8 NA — — 79.2 +3.13% 0 NA — — 96 NA — — NA — — NA — — 300 NA — — NA — — NA — — 500 NA — — NA — — NA — — HIGH 111.9 — 0 79.2 — 0 62.500 — 0 LOW 0.437 — 255 0.3094 — 255 3.906 — 255 FOSC = 3.579545 MHz SPBRG 1 MHz SPBRG 32.768 kHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 0.3 0.301 +0.23% 185 0.300 +0.16% 51 0.256 -14.67% 1 1.2 1.190 -0.83% 46 1.202 +0.16% 12 NA — — 2.4 2.432 +1.32% 22 2.232 -6.99% 6 NA — — 9.6 9.322 -2.90% 5 NA — — NA — — 19.2 18.64 -2.90% 2 NA — — NA — — 76.8 NA — — NA — — NA — — 96 NA — — NA — — NA — — 300 NA — — NA — — NA — — 500 NA — — NA — — NA — — HIGH 55.93 — 0 15.63 — 0 0.512 — 0 LOW 0.2185 — 255 0.0610 — 255 0.0020 — 255 © 2009 Microchip Technology Inc. DS40044G-page 77

PIC16F627A/628A/648A TABLE 12-5: BAUD RATES FOR ASYNCHRONOUS MODE (BRGH = 1) FOSC = 20 MHz SPBRG 16 MHz SPBRG 10 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 9600 9.615 +0.16% 129 9.615 +0.16% 103 9.615 +0.16% 64 19200 19.230 +0.16% 64 19.230 +0.16% 51 18.939 -1.36% 32 38400 37.878 -1.36% 32 38.461 +0.16% 25 39.062 +1.7% 15 57600 56.818 -1.36% 21 58.823 +2.12% 16 56.818 -1.36% 10 115200 113.636 -1.36% 10 111.111 -3.55% 8 125 +8.51% 4 250000 250 0 4 250 0 3 NA — — 625000 625 0 1 NA — — 625 0 0 1250000 1250 0 0 NA — — NA — — FOSC = 7.16 MHz SPBRG 5.068 MHz SPBRG 4 MHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 9600 9.520 -0.83% 46 9598.485 0.016% 32 9615.385 0.160% 25 19200 19.454 +1.32% 22 18632.35 -2.956% 16 19230.77 0.160% 12 38400 37.286 -2.90% 11 39593.75 3.109% 7 35714.29 -6.994% 6 57600 55.930 -2.90% 7 52791.67 -8.348% 5 62500 8.507% 3 115200 111.860 -2.90% 3 105583.3 -8.348% 2 125000 8.507% 1 250000 NA — — 316750 26.700% 0 250000 0.000% 0 625000 NA — — NA — — NA — — 1250000 NA — — NA — — NA — — FOSC = 3.579 MHz SPBRG 1 MHz SPBRG 32.768 kHz SPBRG BAUD value value value RATE (K) KBAUD ERROR (decimal) KBAUD ERROR (decimal) KBAUD ERROR (decimal) 9600 9725.543 1.308% 22 8.928 -6.994% 6 NA NA NA 19200 18640.63 -2.913% 11 20833.3 8.507% 2 NA NA NA 38400 37281.25 -2.913% 5 31250 -18.620% 1 NA NA NA 57600 55921.88 -2.913% 3 62500 +8.507 0 NA NA NA 115200 111243.8 -2.913% 1 NA — — NA NA NA 250000 223687.5 -10.525% 0 NA — — NA NA NA 625000 NA — — NA — — NA NA NA 1250000 NA — — NA — — NA NA NA DS40044G-page 78 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 12.2 USART Asynchronous Mode Transmission is enabled by setting enable bit TXEN (TXSTA<5>). The actual transmission will not occur In this mode, the USART uses standard non-return-to- until the TXREG register has been loaded with data zero (NRZ) format (one Start bit, eight or nine data bits and the Baud Rate Generator (BRG) has produced a and one Stop bit). The most common data format is shift clock (Figure12-1). The transmission can also be 8-bit. A dedicated 8-bit baud rate generator is used to started by first loading the TXREG register and then derive baud rate frequencies from the oscillator. The setting enable bit TXEN. Normally when transmission USART transmits and receives the LSb first. The is first started, the TSR register is empty, so a transfer USART’s transmitter and receiver are functionally to the TXREG register will result in an immediate independent, but use the same data format and baud transfer to TSR resulting in an empty TXREG. A back- rate. The baud rate generator produces a clock either to-back transfer is thus possible (Figure12-3). Clearing x16 or x64 of the bit shift rate, depending on bit BRGH enable bit TXEN during a transmission will cause the (TXSTA<2>). Parity is not supported by the hardware, transmission to be aborted and will reset the but can be implemented in software (and stored as the transmitter. As a result the RB2/TX/CK pin will revert to ninth data bit). Asynchronous mode is stopped during high-impedance. Sleep. In order to select 9-bit transmission, transmit bit TX9 Asynchronous mode is selected by clearing bit SYNC (TXSTA<6>) should be set and the ninth bit should be (TXSTA<4>). written to TX9D (TXSTA<0>). The ninth bit must be The USART Asynchronous module consists of the written before writing the 8-bit data to the TXREG following important elements: register. This is because a data write to the TXREG register can result in an immediate transfer of the data • Baud Rate Generator to the TSR register (if the TSR is empty). In such a • Sampling Circuit case, an incorrect ninth data bit may be loaded in the • Asynchronous Transmitter TSR register. • Asynchronous Receiver 12.2.1 USART ASYNCHRONOUS TRANSMITTER The USART transmitter block diagram is shown in Figure12-1. The heart of the transmitter is the Transmit (serial) Shift Register (TSR). The shift register obtains its data from the read/write transmit buffer, TXREG. The TXREG register is loaded with data in software. The TSR register is not loaded until the Stop bit has been transmitted from the previous load. As soon as the Stop bit is transmitted, the TSR is loaded with new data from the TXREG register (if available). Once the TXREG register transfers the data to the TSR register (occurs in one TCY), the TXREG register is empty and flag bit TXIF (PIR1<4>) is set. This interrupt can be enabled/ disabled by setting/clearing enable bit TXIE (PIE1<4>). Flag bit TXIF will be set regardless of the state of enable bit TXIE and cannot be cleared in software. It will reset only when new data is loaded into the TXREG register. While flag bit TXIF indicated the status of the TXREG register, another bit TRMT (TXSTA<1>) shows the status of the TSR register. Status bit TRMT is a read-only bit which is set when the TSR register is empty. No interrupt logic is tied to this bit, so the user has to poll this bit in order to determine if the TSR register is empty. Note1: The TSR register is not mapped in data memory so it is not available to the user. 2: Flag bit TXIF is set when enable bit TXEN is set. © 2009 Microchip Technology Inc. DS40044G-page 79

PIC16F627A/628A/648A FIGURE 12-1: USART TRANSMIT BLOCK DIAGRAM Data Bus TXIF TXREG register TXIE 8 MSb LSb (8) ² ² ² 0 Pin Buffer and Control TSR register RB2/TX/CK pin Interrupt TXEN Baud Rate CLK TRMT SPEN SPBRG TX9 Baud Rate Generator TX9D Follow these steps when setting up an Asynchronous Transmission: 1. TRISB<1> and TRISB<2> should both be set to ‘1’ to configure the RB1/RX/DT and RB2/TX/CK pins as inputs. Output drive, when required, is controlled by the peripheral circuitry. 2. Initialize the SPBRG register for the appropriate baud rate. If a high-speed baud rate is desired, set bit BRGH. (Section12.1 “USART Baud Rate Generator (BRG)”). 3. Enable the asynchronous serial port by clearing bit SYNC and setting bit SPEN. 4. If interrupts are desired, then set enable bit TXIE. 5. If 9-bit transmission is desired, then set transmit bit TX9. 6. Enable the transmission by setting bit TXEN, which will also set bit TXIF. 7. If 9-bit transmission is selected, the ninth bit should be loaded in bit TX9D. 8. Load data to the TXREG register (starts transmission). FIGURE 12-2: ASYNCHRONOUS TRANSMISSION Write to TXREG Word 1 BRG output (shift clock) RB2/TX/CK (pin) Start bit bit 0 bit 1 bit 7/8 Stop bit Word 1 TXIF bit (Transmit buffer reg. empty flag) Word 1 TRMT bit Transmit Shift Reg. (Transmit shift reg. empty flag) DS40044G-page 80 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 12-3: ASYNCHRONOUS TRANSMISSION (BACK TO BACK) Write to TXREG Word 1 Word 2 BRG output (shift clock) RB2/TX/CK (pin) Start bit bit 0 bit 1 bit 7/8 Stop bit Start bit bit 0 TXIF bit (interrupt reg. flag) Word 1 Word 2 TRMT bit Word 1 (Transmit shift Transmit Shift Reg. Word 2 reg. empty flag) Transmit Shift Reg. . Note: This timing diagram shows two consecutive transmissions. TABLE 12-6: REGISTERS ASSOCIATED WITH ASYNCHRONOUS TRANSMISSION Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 19h TXREG USART Transmit Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented locations read as ‘0’. Shaded cells are not used for Asynchronous Transmission. © 2009 Microchip Technology Inc. DS40044G-page 81

PIC16F627A/628A/648A 12.2.2 USART ASYNCHRONOUS double buffered register (i.e., it is a two-deep FIFO). It RECEIVER is possible for two bytes of data to be received and transferred to the RCREG FIFO and a third byte begin The receiver block diagram is shown in Figure12-4. shifting to the RSR register. On the detection of the The data is received on the RB1/RX/DT pin and drives Stop bit of the third byte, if the RCREG register is still the data recovery block. The data recovery block is full, then overrun error bit OERR (RCSTA<1>) will be actually a high-speed shifter operating at x16 times the set. The word in the RSR will be lost. The RCREG baud rate, whereas the main receive serial shifter register can be read twice to retrieve the two bytes in operates at the bit rate or at FOSC. the FIFO. Overrun bit OERR has to be cleared in soft- When Asynchronous mode is selected, reception is ware. This is done by resetting the receive logic (CREN enabled by setting bit CREN (RCSTA<4>). is cleared and then set). If bit OERR is set, transfers The heart of the receiver is the Receive (serial) Shift from the RSR register to the RCREG register are inhib- Register (RSR). After sampling the Stop bit, the ited, so it is essential to clear error bit OERR if it is set. received data in the RSR is transferred to the RCREG Framing error bit FERR (RCSTA<2>) is set if a Stop bit register (if it is empty). If the transfer is complete, flag is detected as clear. Bit FERR and the 9th receive bit bit RCIF (PIR1<5>) is set. The actual interrupt can be are buffered the same way as the receive data. Read- enabled/disabled by setting/clearing enable bit RCIE ing the RCREG, will load bits RX9D and FERR with (PIE1<5>). Flag bit RCIF is a read-only bit, which is new values, therefore it is essential for the user to read cleared by the hardware. It is cleared when the RCREG the RCSTA register before reading RCREG register in order not to lose the old FERR and RX9D information. register has been read and is empty. The RCREG is a FIGURE 12-4: USART RECEIVE BLOCK DIAGRAM x64 Baud Rate CLK OERR FERR CREN SPBRG ÷ 64 MSb RSR register LSb or ÷ 16 Baud Rate Generator Stop (8) 7 • • • 1 0 Start RB1/RX/DT Pin Buffer Data RX9 and Control Recovery 8 SPEN RX9 Enable ADEN Load of Receive RX9 Buffer ADEN RSR<8> 8 RX9D RCREG register FIFO RX9D RCREG register 8 Interrupt RCIF Data Bus RCIE DS40044G-page 82 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 12-5: ASYNCHRONOUS RECEPTION WITH ADDRESS DETECT RB1/RX/DT (Pin) Start Start bit bit 0 bit 1 bit 8 Stop bit bit 0 bit 8 Stop bit bit RCV Shift Reg RCV Buffer Reg bit 8 = 0, Data Byte bit 8 = 1, Address Byte Word 1 RCREG Read RCV Buffer Reg RCREG RCIF (interrupt flag) ‘1’ ‘1’ ADEN = 1 (Address Match Enable) Note: This timing diagram shows a data byte followed by an address byte. The data byte is not read into the RCREG (Receive Buffer) because ADEN = 1 and bit 8 = 0. FIGURE 12-6: ASYNCHRONOUS RECEPTION WITH ADDRESS BYTE FIRST RB1/RX/DT (pin) Start Start bit bit 0 bit 1 bit 8 Stop bit bit 0 bit 8 Stop bit bit RCV Shift Reg RCV Buffer Reg bit 8 = 1, Address Byte Word 1 bit 8 = 0, Data Byte RCREG Read RCV Buffer Reg RCREG RCIF (Interrupt Flag) ‘1’ ‘1’ ADEN = 1 (Address Match Enable) Note: This timing diagram shows an address byte followed by an data byte. The data byte is not read into the RCREG (receive buffer) because ADEN was not updated (still = 1) and bit 8 = 0. FIGURE 12-7: ASYNCHRONOUS RECEPTION WITH ADDRESS BYTE FIRST FOLLOWED BY VALID DATA BYTE RB1/RX/DT (pin) Start Start bit bit 0 bit 1 bit 8 Stop bit bit 0 bit 8 Stop bit bit RCV Shift Reg RCV Buffer Reg bit 8 = 1, Address Byte Word 1 bit 8 = 0, Data Byte Word 2 RCREG RCREG Read RCV Buffer Reg RCREG RCIF (Interrupt Flag) ADEN (Address Match Enable) Note: This timing diagram shows an address byte followed by an data byte. The data byte is read into the RCREG (Receive Buffer) because ADEN was updated after an address match, and was cleared to a ‘0’, so the contents of the Receive Shift Register (RSR) are read into the Receive Buffer regardless of the value of bit 8. © 2009 Microchip Technology Inc. DS40044G-page 83

PIC16F627A/628A/648A Follow these steps when setting up an Asynchronous Reception: 1. TRISB<1> and TRISB<2> should both be set to ‘1’ to configure the RB1/RX/DT and RB2/TX/CK pins as inputs. Output drive, when required, is controlled by the peripheral circuitry. 2. Initialize the SPBRG register for the appropriate baud rate. If a high-speed baud rate is desired, set bit BRGH. (Section12.1 “USART Baud Rate Generator (BRG)”). 3. Enable the asynchronous serial port by clearing bit SYNC and setting bit SPEN. 4. If interrupts are desired, then set enable bit RCIE. 5. If 9-bit reception is desired, then set bit RX9. 6. Enable the reception by setting bit CREN. 7. Flag bit RCIF will be set when reception is complete and an interrupt will be generated if enable bit RCIE was set. 8. Read the RCSTA register to get the ninth bit (if enabled) and determine if any error occurred during reception. 9. Read the 8-bit received data by reading the RCREG register. 10. If an OERR error occurred, clear the error by clearing enable bit CREN. TABLE 12-7: REGISTERS ASSOCIATED WITH ASYNCHRONOUS RECEPTION Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 1Ah RCREG USART Receive Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented locations read as ‘0’. Shaded cells are not used for asynchronous reception. DS40044G-page 84 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 12.3 USART Address Detect Function The ADEN bit will only take effect when the receiver is configured in 9-bit mode (RX9 = 1). When ADEN is 12.3.1 USART 9-BIT RECEIVER WITH disabled (= 0), all data bytes are received and the 9th ADDRESS DETECT bit can be used as the parity bit. When the RX9 bit is set in the RCSTA register, 9 bits The receive block diagram is shown in Figure12-4. are received and the ninth bit is placed in the RX9D bit Reception is enabled by setting bit CREN of the RCSTA register. The USART module has a (RCSTA<4>). special provision for multiprocessor communication. Multiprocessor communication is enabled by setting 12.3.1.1 Setting up 9-bit mode with Address the ADEN bit (RCSTA<3>) along with the RX9 bit. The Detect port is now programmed such that when the last bit is Follow these steps when setting up Asynchronous received, the contents of the Receive Shift Register Reception with Address Detect Enabled: (RSR) are transferred to the receive buffer, the ninth bit of the RSR (RSR<8>) is transferred to RX9D, and the 1. TRISB<1> and TRISB<2> should both be set to receive interrupt is set if and only if RSR<8> = 1. This ‘1’ to configure the RB1/RX/DT and RB2/TX/CK feature can be used in a multiprocessor system as pins as inputs. Output drive, when required, is follows: controlled by the peripheral circuitry. 2. Initialize the SPBRG register for the appropriate A master processor intends to transmit a block of data baud rate. If a high-speed baud rate is desired, to one of many slaves. It must first send out an address set bit BRGH. byte that identifies the target slave. An address byte is identified by setting the ninth bit (RSR<8>) to a ‘1’ 3. Enable asynchronous communication by setting (instead of a ‘0’ for a data byte). If the ADEN and RX9 or clearing bit SYNC and setting bit SPEN. bits are set in the slave’s RCSTA register, enabling 4. If interrupts are desired, then set enable bit multiprocessor communication, all data bytes will be RCIE. ignored. However, if the ninth received bit is equal to a 5. Set bit RX9 to enable 9-bit reception. ‘1’, indicating that the received byte is an address, the 6. Set ADEN to enable address detect. slave will be interrupted and the contents of the RSR 7. Enable the reception by setting enable bit CREN register will be transferred into the receive buffer. This or SREN. allows the slave to be interrupted only by addresses, so that the slave can examine the received byte to see if it 8. Flag bit RCIF will be set when reception is is being addressed. The addressed slave will then clear complete and an interrupt will be generated if its ADEN bit and prepare to receive data bytes from the enable bit RCIE was set. master. 9. Read the 8-bit received data by reading the RCREG register to determine if the device is When ADEN is enabled (= 1), all data bytes are being addressed. ignored. Following the Stop bit, the data will not be loaded into the receive buffer, and no interrupt will 10. If an OERR error occurred, clear the error by occur. If another byte is shifted into the RSR register, clearing enable bit CREN if it was already set. the previous data byte will be lost. 11. If the device has been addressed (RSR<8> = 1 with address match enabled), clear the ADEN and RCIF bits to allow data bytes and address bytes to be read into the receive buffer and interrupt the CPU. TABLE 12-8: REGISTERS ASSOCIATED WITH ASYNCHRONOUS RECEPTION Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 1Ah RCREG USART Receive Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented locations read as ‘0’. Shaded cells are not used for asynchronous reception. © 2009 Microchip Technology Inc. DS40044G-page 85

PIC16F627A/628A/648A 12.4 USART Synchronous Master Clearing enable bit TXEN during a transmission will Mode cause the transmission to be aborted and will reset the transmitter. The DT and CK pins will revert to high- In Synchronous Master mode, the data is transmitted in impedance. If either bit CREN or bit SREN is set during a half-duplex manner (i.e., transmission and reception a transmission, the transmission is aborted and the DT do not occur at the same time). When transmitting data, pin reverts to a high-impedance state (for a reception). the reception is inhibited and vice versa. Synchronous The CK pin will remain an output if bit CSRC is set mode is entered by setting bit SYNC (TXSTA<4>). In (internal clock). The transmitter logic however is not addition enable bit SPEN (RCSTA<7>) is set in order to reset although it is disconnected from the pins. In order configure the RB2/TX/CK and RB1/RX/DT I/O pins to to reset the transmitter, the user has to clear bit TXEN. CK (clock) and DT (data) lines, respectively. The If bit SREN is set (to interrupt an on-going transmission Master mode indicates that the processor transmits the and receive a single word), then after the single word is master clock on the CK line. The Master mode is received, bit SREN will be cleared and the serial port entered by setting bit CSRC (TXSTA<7>). will revert back to transmitting since bit TXEN is still set. The DT line will immediately switch from high-imped- 12.4.1 USART SYNCHRONOUS MASTER ance Receive mode to transmit and start driving. To TRANSMISSION avoid this, bit TXEN should be cleared. The USART transmitter block diagram is shown in In order to select 9-bit transmission, the TX9 Figure12-1. The heart of the transmitter is the Transmit (TXSTA<6>) bit should be set and the ninth bit should (serial) Shift Register (TSR). The shift register obtains be written to bit TX9D (TXSTA<0>). The ninth bit must its data from the read/write transmit buffer register, be written before writing the 8-bit data to the TXREG TXREG. The TXREG register is loaded with data in register. This is because a data write to the TXREG can software. The TSR register is not loaded until the last result in an immediate transfer of the data to the TSR bit has been transmitted from the previous load. As register (if the TSR is empty). If the TSR was empty and soon as the last bit is transmitted, the TSR is loaded the TXREG was written before writing the “new” TX9D, with new data from the TXREG (if available). Once the the “present” value of bit TX9D is loaded. TXREG register transfers the data to the TSR register Follow these steps when setting up a Synchronous (occurs in one Tcycle), the TXREG is empty and Master Transmission: interrupt bit, TXIF (PIR1<4>) is set. The interrupt can be enabled/disabled by setting/clearing enable bit TXIE 1. TRISB<1> and TRISB<2> should both be set to (PIE1<4>). Flag bit TXIF will be set regardless of the ‘1’ to configure the RB1/RX/DT and RB2/TX/CK state of enable bit TXIE and cannot be cleared in pins as inputs. Output drive, when required, is software. It will reset only when new data is loaded into controlled by the peripheral circuitry. the TXREG register. While flag bit TXIF indicates the 2. Initialize the SPBRG register for the appropriate status of the TXREG register, another bit TRMT baud rate (Section12.1 “USART Baud Rate (TXSTA<1>) shows the status of the TSR register. Generator (BRG)”). TRMT is a read-only bit which is set when the TSR is 3. Enable the synchronous master serial port by empty. No interrupt logic is tied to this bit, so the user setting bits SYNC, SPEN and CSRC. has to poll this bit in order to determine if the TSR 4. If interrupts are desired, then set enable bit register is empty. The TSR is not mapped in data TXIE. memory so it is not available to the user. 5. If 9-bit transmission is desired, then set bit TX9. Transmission is enabled by setting enable bit TXEN 6. Enable the transmission by setting bit TXEN. (TXSTA<5>). The actual transmission will not occur 7. If 9-bit transmission is selected, the ninth bit until the TXREG register has been loaded with data. should be loaded in bit TX9D. The first data bit will be shifted out on the next available rising edge of the clock on the CK line. Data out is 8. Start each transmission by loading data to the stable around the falling edge of the synchronous clock TXREG register. (Figure12-8). The transmission can also be started by first loading the TXREG register and then setting bit TXEN (Figure12-9). This is advantageous when slow baud rates are selected, since the BRG is kept in Reset when bits TXEN, CREN and SREN are clear. Setting enable bit TXEN will start the BRG, creating a shift clock immediately. Normally, when transmission is first started, the TSR register is empty, so a transfer to the TXREG register will result in an immediate transfer to TSR resulting in an empty TXREG. Back-to-back transfers are possible. DS40044G-page 86 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 12-9: REGISTERS ASSOCIATED WITH SYNCHRONOUS MASTER TRANSMISSION Value on Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR other Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 19h TXREG USART Transmit Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented, read as ‘0’. Shaded cells are not used for synchronous master transmission. FIGURE 12-8: SYNCHRONOUS TRANSMISSION Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4 Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4 RB1/RX/DT pin bit 0 bit 1 bit 2 bit 7 bit 0 bit 1 bit 7 Word 1 Word 2 RB2/TX/CK pin Write to TXREG Reg Write Word 1 Write Word 2 TXIF bit (Interrupt Flag) TRMTT RbMitT ‘1’ ‘1’ TXEN bit Note: Sync Master Mode; SPBRG = 0. Continuous transmission of two 8-bit words. FIGURE 12-9: SYNCHRONOUS TRANSMISSION (THROUGH TXEN) RB1/RX/DT pin bit 0 bit 1 bit 2 bit 6 bit 7 RB2/TX/CK pin Write to TXREG Reg TXIF bit TRMT bit TXEN bit © 2009 Microchip Technology Inc. DS40044G-page 87

PIC16F627A/628A/648A 12.4.2 USART SYNCHRONOUS MASTER Follow these steps when setting up a Synchronous RECEPTION Master Reception: Once Synchronous mode is selected, reception is 1. TRISB<1> and TRISB<2> should both be set to enabled by setting either enable bit SREN ‘1’ to configure the RB1/RX/DT and RB2/TX/CK (RCSTA<5>) or enable bit CREN (RCSTA<4>). Data is pins as inputs. Output drive, when required, is sampled on the RB1/RX/DT pin on the falling edge of controlled by the peripheral circuitry. the clock. If enable bit SREN is set, then only a single 2. Initialize the SPBRG register for the appropriate word is received. If enable bit CREN is set, the recep- baud rate. (Section12.1 “USART Baud Rate tion is continuous until CREN is cleared. If both bits are Generator (BRG)”). set, then CREN takes precedence. After clocking the 3. Enable the synchronous master serial port by last bit, the received data in the Receive Shift Register setting bits SYNC, SPEN and CSRC. (RSR) is transferred to the RCREG register (if it is 4. Ensure bits CREN and SREN are clear. empty). When the transfer is complete, interrupt flag bit 5. If interrupts are desired, then set enable bit RCIF (PIR1<5>) is set. The actual interrupt can be RCIE. enabled/disabled by setting/clearing enable bit RCIE (PIE1<5>). Flag bit RCIF is a read-only bit which is 6. If 9-bit reception is desired, then set bit RX9. reset by the hardware. In this case, it is reset when the 7. If a single reception is required, set bit SREN. RCREG register has been read and is empty. The For continuous reception, set bit CREN. RCREG is a double buffered register (i.e., it is a two- 8. Interrupt flag bit RCIF will be set when reception deep FIFO). It is possible for two bytes of data to be is complete and an interrupt will be generated if received and transferred to the RCREG FIFO and a enable bit RCIE was set. third byte to begin shifting into the RSR register. On the 9. Read the RCSTA register to get the ninth bit (if clocking of the last bit of the third byte, if the RCREG enabled) and determine if any error occurred register is still full, then overrun error bit OERR during reception. (RCSTA<1>) is set. The word in the RSR will be lost. 10. Read the 8-bit received data by reading the The RCREG register can be read twice to retrieve the RCREG register. two bytes in the FIFO. Bit OERR has to be cleared in 11. If an OERR error occurred, clear the error by software (by clearing bit CREN). If bit OERR is set, clearing bit CREN. transfers from the RSR to the RCREG are inhibited, so it is essential to clear bit OERR if it is set. The 9th receive bit is buffered the same way as the receive data. Reading the RCREG register, will load bit RX9D with a new value, therefore it is essential for the user to read the RCSTA register before reading RCREG in order not to lose the old RX9D information. TABLE 12-10: REGISTERS ASSOCIATED WITH SYNCHRONOUS MASTER RECEPTION Value on: Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR other Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 1Ah RCREG USART Receive Data Register 0000 0000 0000 0000 8Ch PIE1 EPIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE -000 0000 -000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented read as ‘0’. Shaded cells are not used for synchronous master reception. DS40044G-page 88 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 12-10: SYNCHRONOUS RECEPTION (MASTER MODE, SREN) Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4Q1Q2Q3Q4 RB1/RX/DT pin bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 bit 7 RB2/TX/CK pin WRITE to Bit SREN SREN bit ‘0’ ‘0’ CREN bit RCIF bit (Interrupt) Read RXREG Note: Timing diagram demonstrates Sync Master mode with bit SREN = 1 and bit BRG = 0. 12.5 USART Synchronous Slave Mode Follow these steps when setting up a Synchronous Slave Transmission: Synchronous Slave mode differs from the Master mode 1. TRISB<1> and TRISB<2> should both be set to in the fact that the shift clock is supplied externally at ‘1’ to configure the RB1/RX/DT and RB2/TX/CK the RB2/TX/CK pin (instead of being supplied internally pins as inputs. Output drive, when required, is in Master mode). This allows the device to transfer or controlled by the peripheral circuitry. receive data while in Sleep mode. Slave mode is entered by clearing bit CSRC (TXSTA<7>). 2. Enable the synchronous slave serial port by setting bits SYNC and SPEN and clearing bit 12.5.1 USART SYNCHRONOUS SLAVE CSRC. TRANSMIT 3. Clear bits CREN and SREN. The operation of the Synchronous Master and Slave 4. If interrupts are desired, then set enable bit modes are identical except in the case of the Sleep TXIE. mode. 5. If 9-bit transmission is desired, then set bit TX9. If two words are written to the TXREG and then the 6. Enable the transmission by setting enable bit SLEEP instruction is executed, the following will occur: TXEN. 7. If 9-bit transmission is selected, the ninth bit a) The first word will immediately transfer to the should be loaded in bit TX9D. TSR register and transmit. 8. Start transmission by loading data to the TXREG b) The second word will remain in TXREG register. register. c) Flag bit TXIF will not be set. d) When the first word has been shifted out of TSR, the TXREG register will transfer the second word to the TSR and flag bit TXIF will now be set. e) If enable bit TXIE is set, the interrupt will wake the chip from Sleep and if the global interrupt is enabled, the program will branch to the interrupt vector (0004h). © 2009 Microchip Technology Inc. DS40044G-page 89

PIC16F627A/628A/648A 12.5.2 USART SYNCHRONOUS SLAVE Follow these steps when setting up a Synchronous RECEPTION Slave Reception: The operation of the Synchronous Master and Slave 1. TRISB<1> and TRISB<2> should both be set to modes is identical except in the case of the Sleep ‘1’ to configure the RB1/RX/DT and RB2/TX/CK mode. Also, bit SREN is a “don’t care” in Slave mode. pins as inputs. Output drive, when required, is controlled by the peripheral circuitry. If receive is enabled by setting bit CREN prior to the 2. Enable the synchronous master serial port by SLEEP instruction, then a word may be received during setting bits SYNC and SPEN and clearing bit Sleep. On completely receiving the word, the RSR CSRC. register will transfer the data to the RCREG register and if enable bit RCIE bit is set, the interrupt generated 3. If interrupts are desired, then set enable bit will wake the chip from Sleep. If the global interrupt is RCIE. enabled, the program will branch to the interrupt vector 4. If 9-bit reception is desired, then set bit RX9. (0004h). 5. To enable reception, set enable bit CREN. 6. Flag bit RCIF will be set when reception is complete and an interrupt will be generated, if enable bit RCIE was set. 7. Read the RCSTA register to get the ninth bit (if enabled) and determine if any error occurred during reception. 8. Read the 8-bit received data by reading the RCREG register. 9. If an OERR error occurred, clear the error by clearing bit CREN. TABLE 12-11: REGISTERS ASSOCIATED WITH SYNCHRONOUS SLAVE TRANSMISSION Value on Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR other Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 19h TXREG USART Transmit Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented read as ‘0’. Shaded cells are not used for synchronous slave transmission. TABLE 12-12: REGISTERS ASSOCIATED WITH SYNCHRONOUS SLAVE RECEPTION Value on Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 POR other Resets 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 18h RCSTA SPEN RX9 SREN CREN ADEN FERR OERR RX9D 0000 000x 0000 000x 1Ah RCREG USART Receive Data Register 0000 0000 0000 0000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 98h TXSTA CSRC TX9 TXEN SYNC — BRGH TRMT TX9D 0000 -010 0000 -010 99h SPBRG Baud Rate Generator Register 0000 0000 0000 0000 Legend: x = unknown, - = unimplemented read as ‘0’. Shaded cells are not used for synchronous slave reception. DS40044G-page 90 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 13.0 DATA EEPROM MEMORY The EEPROM data memory allows byte read and write. A byte write automatically erases the location and The EEPROM data memory is readable and writable writes the new data (erase before write). The EEPROM during normal operation (full VDD range). This memory data memory is rated for high erase/write cycles. The is not directly mapped in the register file space. Instead write time is controlled by an on-chip timer. The write it is indirectly addressed through the Special Function time will vary with voltage and temperature, as well as Registers (SFRs). There are four SFRs used to read from chip-to-chip. Please refer to AC specifications for and write this memory. These registers are: exact limits. • EECON1 When the device is code-protected, the CPU can • EECON2 (Not a physically implemented register) continue to read and write the data EEPROM memory. A • EEDATA device programmer can no longer access thismemory. • EEADR Additional information on the data EEPROM is available in the PIC® Mid-Range Reference Manual EEDATA holds the 8-bit data for read/write and EEADR (DS33023). holds the address of the EEPROM location being accessed. PIC16F627A/628A devices have 128 bytes of data EEPROM with an address range from 0h to 7Fh. The PIC16F648A device has 256 bytes of data EEPROM with an address range from 0h to FFh. REGISTER 13-1: EEDATA – EEPROM DATA REGISTER (ADDRESS: 9Ah) R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x EEDAT7 EEDAT6 EEDAT5 EEDAT4 EEDAT3 EEDAT2 EEDAT1 EEDAT0 bit 7 bit 0 bit 7-0 EEDATn: Byte value to Write to or Read from data EEPROM memory location. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown REGISTER 13-2: EEADR – EEPROM ADDRESS REGISTER (ADDRESS: 9Bh) R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x R/W-x EADR7 EADR6 EADR5 EADR4 EADR3 EADR2 EADR1 EADR0 bit 7 bit 0 bit 7 PIC16F627A/628A Unimplemented Address: Must be set to ‘0’ PIC16F648A EEADR: Set to ‘1’ specifies top 128 locations (128-255) of EEPROM Read/Write Operation bit 6-0 EEADR: Specifies one of 128 locations of EEPROM Read/Write Operation Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown © 2009 Microchip Technology Inc. DS40044G-page 91

PIC16F627A/628A/648A 13.1 EEADR 13.2 EECON1 and EECON2 Registers The PIC16F648A EEADR register addresses 256 EECON1 is the control register with four low order bits bytes of data EEPROM. All eight bits in the register physically implemented. The upper-four bits are non- (EEADR<7:0>) are required. existent and read as ‘0’s. The PIC16F627A/628A EEADR register addresses Control bits RD and WR initiate read and write, only the first 128 bytes of data EEPROM so only seven respectively. These bits cannot be cleared, only set, in of the eight bits in the register (EEADR<6:0>) are software. They are cleared in hardware at completion required. The upper bit is address decoded. This of the read or write operation. The inability to clear the means that this bit should always be ‘0’ to ensure that WR bit in software prevents the accidental, premature the address is in the 128 byte memory space. termination of a write operation. The WREN bit, when set, will allow a write operation. On power-up, the WREN bit is clear. The WRERR bit is set when a write operation is interrupted by a MCLR Reset or a WDT Time-out Reset during normal operation. In these situations, following Reset, the user can check the WRERR bit and rewrite the location. The data and address will be unchanged in the EEDATA and EEADRregisters. Interrupt flag bit EEIF in the PIR1 register is set when write is complete. This bit must be cleared in software. EECON2 is not a physical register. Reading EECON2 will read all ‘0’s. The EECON2 register is used exclusively in the data EEPROM write sequence. REGISTER 13-3: EECON1 – EEPROM CONTROL REGISTER 1 (ADDRESS: 9Ch) U-0 U-0 U-0 U-0 R/W-x R/W-0 R/S-0 R/S-0 — — — — WRERR WREN WR RD bit 7 bit 0 bit 7-4 Unimplemented: Read as ‘0’ bit 3 WRERR: EEPROM Error Flag bit 1 = A write operation is prematurely terminated (any MCLR Reset, any WDT Reset during normal operation or BOR Reset) 0 = The write operation completed bit 2 WREN: EEPROM Write Enable bit 1 = Allows write cycles 0 = Inhibits write to the data EEPROM bit 1 WR: Write Control bit 1 = initiates a write cycle. (The bit is cleared by hardware once write is complete. The WR bit can only be set (not cleared) in software. 0 = Write cycle to the data EEPROM is complete bit 0 RD: Read Control bit 1 = Initiates an EEPROM read (read takes one cycle. RD is cleared in hardware. The RD bit can only be set (not cleared) in software). 0 = Does not initiate an EEPROM read Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown DS40044G-page 92 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 13.3 Reading the EEPROM Data At the completion of the write cycle, the WR bit is Memory cleared in hardware and the EE Write Complete Interrupt Flag bit (EEIF) is set. The user can either To read a data memory location, the user must write the enable this interrupt or poll this bit. The EEIF bit in the address to the EEADR register and then set control bit PIR1 registers must be cleared by software. RD (EECON1<0>). The data is available, in the very next cycle, in the EEDATA register; therefore it can be 13.5 Write Verify read in the next instruction. EEDATA will hold this value until another read or until it is written to by the user Depending on the application, good programming (during a write operation). practice may dictate that the value written to the Data EEPROM should be verified (Example13-3) to the EXAMPLE 13-1: DATA EEPROM READ desired value to be written. This should be used in applications where an EEPROM bit will be stressed BSF STATUS, RP0 ;Bank 1 MOVLW CONFIG_ADDR ; near the specification limit. MOVWF EEADR ;Address to read BSF EECON1, RD ;EE Read EXAMPLE 13-3: WRITE VERIFY MOVF EEDATA, W ;W = EEDATA BSF STATUS, RP0;Bank 1 BCF STATUS, RP0 ;Bank 0 MOVF EEDATA, W BSF EECON1, RD ;Read the 13.4 Writing to the EEPROM Data ;value written ; Memory ;Is the value written (in W reg) and ;read (in EEDATA) the same? To write an EEPROM data location, the user must first ; write the address to the EEADR register and the data SUBWF EEDATA, W ; to the EEDATA register. Then the user must follow a BTFSS STATUS, Z ;Is difference 0? specific sequence to initiate the write for each byte. GOTO WRITE_ERR ;NO, Write error : ;YES, Good write EXAMPLE 13-2: DATA EEPROM WRITE : ;Continue program BSF STATUS, RP0 ;Bank 1 BSF EECON1, WREN ;Enable write 13.6 Protection Against Spurious Write BCF INTCON, GIE ;Disable INTs. BTFSC INTCON,GIE ;See AN576 There are conditions when the device may not want to GOTO $-2 write to the data EEPROM memory. To protect against MOVLW 55h ; RequiredSequenceMMMBOOOSVVVFWLWFWF EEAEEEAECChCOOONNN122,WR ;;;;WWSrreiittt eeW R5A 5Abhhit sbwppreheueevrnneio nubetsusn ialEEtb-EEilnePP.d RR,O OOtnhMM ep woPwwroriitewteer.e-sur,- puv,pa WriToRiumEse Nrm (ei7sc2 hcamlensais rdmeudsr. a htAiaolvsneo) ;begin write The write initiate sequence and the WREN bit together BSF INTCON, GIE ;Enable INTs. help prevent an accidental write during brown-out, power glitch or software malfunction. The write will not initiate if the above sequence is not followed exactly (write 55h to EECON2, write AAh to EECON2, then set WR bit) for each byte. We strongly recommend that interrupts be disabled during this codesegment. A cycle count is executed during the required sequence. Any number that is not equal to the required cycles to execute the required sequence will cause the data not to be written into the EEPROM. Additionally, the WREN bit in EECON1 must be set to enable write. This mechanism prevents accidental writes to data EEPROM due to errant (unexpected) code execution (i.e., lost programs). The user should keep the WREN bit clear at all times, except when updating EEPROM. The WREN bit is not cleared byhardware. After a write sequence has been initiated, clearing the WREN bit will not affect this write cycle. The WR bit will be inhibited from being set unless the WREN bit is set. © 2009 Microchip Technology Inc. DS40044G-page 93

PIC16F627A/628A/648A 13.7 Using the Data EEPROM A simple data EEPROM refresh routine is shown in Example13-4. The data EEPROM is a high endurance, byte addressable array that has been optimized for the storage Note: If data EEPROM is only used to store of frequently changing information (e.g., program constants and/or data that changes rarely, variables or other data that are updated often). When an array refresh is likely not required. See variables in one section change frequently, while specification D124. variables in another section do not change, it is possible to exceed the total number of write cycles to the EEPROM (specification D124) without exceeding the total number of write cycles to a single byte (specifications D120 and D120A). If this is the case, then an array refresh must be performed. For this reason, variables that change infrequently (such as constants, IDs, calibration, etc.) should be stored in Flash program memory. EXAMPLE 13-4: DATA EEPROM REFRESH ROUTINE BANKSEL 0X80 ;select Bank1 CLRF EEADR ;start at address 0 BCF INTCON, GIE ;disable interrupts BTFSC INTCON, GIE ;see AN576 GOTO $ - 2 BSF EECON1, WREN ;enable EE writes Loop BSF EECON1, RD ;retrieve data into EEDATA MOVLW 0x55 ;first step of ... MOVWF EECON2 ;... required sequence MOVLW 0xAA ;second step of ... MOVWF EECON2 ;... required sequence BSF EECON1, WR ;start write sequence BTFSC EECON1, WR ;wait for write complete GOTO $ - 1 #IFDEF __16F648A ;256 bytes in 16F648A INCFSZ EEADR, f ;test for end of memory #ELSE ;128 bytes in 16F627A/628A INCF EEADR, f ;next address BTFSS EEADR, 7 ;test for end of memory #ENDIF ;end of conditional assembly GOTO Loop ;repeat for all locations BCF EECON1, WREN ;disable EE writes BSF INTCON, GIE ;enable interrupts (optional) DS40044G-page 94 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 13.8 Data EEPROM Operation During Code-Protect When the device is code-protected, the CPU is able to read and write data to the data EEPROM. TABLE 13-1: REGISTERS/BITS ASSOCIATED WITH DATA EEPROM Value on Value on all Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Power-on other Reset Resets 9Ah EEDATA EEPROM Data Register xxxx xxxx uuuu uuuu 9Bh EEADR EEPROM Address Register xxxx xxxx uuuu uuuu 9Ch EECON1 — — — — WRERR WREN WR RD ---- x000 ---- q000 9Dh EECON2(1) EEPROM Control Register 2 ---- ---- ---- ---- Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’, q = value depends upon condition. Shaded cells are not used by data EEPROM. Note 1: EECON2 is not a physical register. © 2009 Microchip Technology Inc. DS40044G-page 95

PIC16F627A/628A/648A NOTES: DS40044G-page 96 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.0 SPECIAL FEATURES OF THE 14.1 Configuration Bits CPU The configuration bits can be programmed (read as ‘0’) or left unprogrammed (read as ‘1’) to select various Special circuits to deal with the needs of real-time device configurations. These bits are mapped in applications are what sets a microcontroller apart from program memory location 2007h. other processors. The PIC16F627A/628A/648A family has a host of such features intended to maximize The user will note that address 2007h is beyond the system reliability, minimize cost through elimination of user program memory space. In fact, it belongs to the external components, provide power-saving operating special configuration memory space (2000h-3FFFh), modes and offer code protection. which can be accessed only during programming. See “PIC16F627A/628A/648A EEPROM Memory These are: Programming Specification” (DS41196) for additional 1. OSC selection information. 2. Reset 3. Power-on Reset (POR) 4. Power-up Timer (PWRT) 5. Oscillator Start-Up Timer (OST) 6. Brown-out Reset (BOR) 7. Interrupts 8. Watchdog Timer (WDT) 9. Sleep 10. Code protection 11. ID Locations 12. In-Circuit Serial Programming™ (ICSP™) The PIC16F627A/628A/648A has a Watchdog Timer which is controlled by configuration bits. It runs off its own RC oscillator for added reliability. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in Reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72ms (nominal) on power-up only, designed to keep the part in Reset while the power supply stabilizes. There is also circuitry to reset the device if a brown-out occurs. With these three functions on-chip, most applications need no external Reset circuitry. The Sleep mode is designed to offer a very low current Power-down mode. The user can wake-up from Sleep through external Reset, Watchdog Timer wake-up or through an interrupt. Several oscillator options are also made available to allow the part to fit the application. The RC oscillator option saves system cost while the LP crystal option saves power. A set of configuration bits are used to select various options. © 2009 Microchip Technology Inc. DS40044G-page 97

PIC16F627A/628A/648A REGISTER 14-1: CONFIG – CONFIGURATION WORD REGISTER CP — — — — CPD LVP BOREN MCLRE FOSC2 PWRTE WDTE F0SC1 F0SC0 bit 13 bit 0 bit 13: CP: Flash Program Memory Code Protection bit(2) (PIC16F648A) 1 = Code protection off 0 = 0000h to 0FFFh code-protected (PIC16F628A) 1 = Code protection off 0 = 0000h to 07FFh code-protected (PIC16F627A) 1 = Code protection off 0 = 0000h to 03FFh code-protected bit 12-9: Unimplemented: Read as ‘0’ bit 8: CPD: Data Code Protection bit(3) 1 = Data memory code protection off 0 = Data memory code-protected bit 7: LVP: Low-Voltage Programming Enable bit 1 = RB4/PGM pin has PGM function, low-voltage programming enabled 0 = RB4/PGM is digital I/O, HV on MCLR must be used for programming bit 6: BOREN: Brown-out Reset Enable bit (1) 1 = BOR Reset enabled 0 = BOR Reset disabled bit 5: MCLRE: RA5/MCLR/VPP Pin Function Select bit 1 = RA5/MCLR/VPP pin function is MCLR 0 = RA5/MCLR/VPP pin function is digital Input, MCLR internally tied to VDD bit 3: PWRTE: Power-up Timer Enable bit (1) 1 = PWRT disabled 0 = PWRT enabled bit 2: WDTE: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled bit 4, 1-0: FOSC<2:0>: Oscillator Selection bits(4) 111 = RC oscillator: CLKOUT function on RA6/OSC2/CLKOUT pin, Resistor and Capacitor on RA7/OSC1/CLKIN 110 = RC oscillator: I/O function on RA6/OSC2/CLKOUT pin, Resistor and Capacitor on RA7/OSC1/CLKIN 101 = INTOSC oscillator: CLKOUT function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN 100 = INTOSC oscillator: I/O function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN 011 = EC: I/O function on RA6/OSC2/CLKOUT pin, CLKIN on RA7/OSC1/CLKIN 010 = HS oscillator: High-speed crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN 001 = XT oscillator: Crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN 000 = LP oscillator: Low-power crystal on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN Note 1: Enabling Brown-out Reset does not automatically enable the Power-up Timer (PWRT) the way it does on the PIC16F627/628 devices. 2: The code protection scheme has changed from the code protection scheme used on the PIC16F627/628 devices. The entire Flash program memory needs to be bulk erased to set the CP bit, turning the code protection off. See “PIC16F627A/628A/648A EEPROM Memory Programming Specification” (DS41196) for details. 3: The entire data EEPROM needs to be bulk erased to set the CPD bit, turning the code protection off. See “PIC16F627A/ 628A/648A EEPROM Memory Programming Specification” (DS41196) for details. 4: When MCLR is asserted in INTOSC mode, the internal clock oscillator is disabled. Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = bit is set ‘0’ = bit is cleared x = bit is unknown DS40044G-page 98 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.2 Oscillator Configurations TABLE 14-1: CAPACITOR SELECTION FOR CERAMIC RESONATORS 14.2.1 OSCILLATOR TYPES Mode Freq OSC1(C1) OSC2(C2) The PIC16F627A/628A/648A can be operated in eight XT 455 kHz 22-100 pF 22-100 pF different oscillator options. The user can program three 2.0 MHz 15-68 pF 15-68 pF configuration bits (FOSC2 through FOSC0) to select 4.0 MHz 15-68 pF 15-68 pF one of these eight modes: HS 8.0 MHz 10-68 pF 10-68 pF • LP Low Power Crystal 16.0 MHz 10-22 pF 10-22 pF • XT Crystal/Resonator Note: Higher capacitance increases the stability • HS High Speed Crystal/Resonator of the oscillator, but also increases the • RC External Resistor/Capacitor (2 modes) start-up time. These values are for design • INTOSCInternal Precision Oscillator (2 modes) guidance only. Since each resonator has • EC External Clock In its own characteristics, the user should consult the resonator manufacturer for 14.2.2 CRYSTAL OSCILLATOR / CERAMIC appropriate values of external compo- RESONATORS nents. In XT, LP or HS modes a crystal or ceramic resonator TABLE 14-2: CAPACITOR SELECTION FOR is connected to the OSC1 and OSC2 pins to establish oscillation (Figure14-1). The PIC16F627A/628A/648A CRYSTAL OSCILLATOR oscillator design requires the use of a parallel cut Mode Freq OSC1(C1) OSC2(C2) crystal. Use of a series cut crystal may give a frequency out of the crystal manufacturers specifications. When in LP 32 kHz 15-30 pF 15-30 pF XT, LP or HS modes, the device can have an external 200 kHz 0-15 pF 0-15 pF clock source to drive the OSC1 pin (Figure14-4). XT 100 kHz 68-150 pF 150-200 pF 2 MHz 15-30 pF 15-30 pF FIGURE 14-1: CRYSTAL OPERATION 4 MHz 15-30 pF 15-30 pF (OR CERAMIC RESONATOR) HS 8 MHz 15-30 pF 15-30 pF (HS, XT OR LP OSC 10 MHz 15-30 pF 15-30 pF CONFIGURATION) 20 MHz 15-30 pF 15-30 pF Note: Higher capacitance increases the stability OSC1 of the oscillator, but also increases the C1(2) start-up time. These values are for design guidance only. A series resistor (RS) may XTAL Sleep RF be required in HS mode, as well as XT OSC2 mode, to avoid overdriving crystals with RS(1) FOSC low drive level specification. Since each C2(2) crystal has its own characteristics, the PIC16F627A/628A/648A user should consult the crystal manufac- Note 1: A series resistor may be required for AT strip cut turer for appropriate values of external crystals. components. 2: See Table14-1 and Table14-2 for recommended values of C1 and C2. © 2009 Microchip Technology Inc. DS40044G-page 99

PIC16F627A/628A/648A 14.2.3 EXTERNAL CRYSTAL OSCILLATOR FIGURE 14-3: EXTERNAL SERIES CIRCUIT RESONANT CRYSTAL OSCILLATOR CIRCUIT Either a prepackaged oscillator can be used or a simple oscillator circuit with TTL gates can be built. Prepackaged oscillators provide a wide operating To other range and better stability. A well-designed crystal 330 KΩ 330 KΩ Devices oscillator will provide good performance with TTL 74AS04 74AS04 74AS04 gates. Two types of crystal oscillator circuits can be used; one with series resonance, or one with parallel CLKIN 0.1 pF resonance. PIC16F627A/ Figure14-2 shows implementation of a parallel 628A/648A resonant oscillator circuit. The circuit is designed to XTAL use the fundamental frequency of the crystal. The 74AS04 inverter performs the 180° phase shift that a parallel oscillator requires. The 4.7kΩ resistor 14.2.4 PRECISION INTERNAL 4MHZ provides the negative feedback for stability. The OSCILLATOR 10kΩ potentiometers bias the 74AS04 in the linear region. This could be used for external oscillator The internal precision oscillator provides a fixed 4MHz designs. (nominal) system clock at VDD = 5V and 25°C. See Section17.0 “Electrical Specifications”, for informa- FIGURE 14-2: EXTERNAL PARALLEL tion on variation over voltage and temperature. RESONANT CRYSTAL 14.2.5 EXTERNAL CLOCK IN OSCILLATOR CIRCUIT For applications where a clock is already available +5V elsewhere, users may directly drive the PIC16F627A/ To other 628A/648A provided that this external clock source meets Devices 10K the AC/DC timing requirements listed in Section17.6 4.7K 74AS04 PIC16F627A/628A/648A “Timing Diagrams and Specifications”. Figure14-4 74AS04 CLKIN below shows how an external clock circuit should be configured. 10K FIGURE 14-4: EXTERNAL CLOCK INPUT XTAL OPERATION (EC, HS, XT OR LP OSC 10K CONFIGURATION) C1 C2 Clock from RA7/OSC1/CLKIN ext. system PIC16F627A/628A/648A Figure14-3 shows a series resonant oscillator circuit. This circuit is also designed to use the fundamental RA6 RA6/OSC2/CLKOUT frequency of the crystal. The inverter performs a 180° phase shift in a series resonant oscillator circuit. The 330kΩ resistors provide the negative feedback to bias the inverters in their linear region. DS40044G-page 100 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.2.6 RC OSCILLATOR 14.2.8 SPECIAL FEATURE: DUAL-SPEED OSCILLATOR MODES For applications where precise timing is not a requirement, the RC oscillator option is available. The A software programmable dual-speed oscillator mode operation and functionality of the RC oscillator is is provided when the PIC16F627A/628A/648A is dependent upon a number of variables. The RC oscillator configured in the INTOSC oscillator mode. This feature frequency is a function of: allows users to dynamically toggle the oscillator speed between 4MHz and 48kHz nominal in the INTOSC • Supply voltage mode. Applications that require low-current power • Resistor (REXT) and capacitor (CEXT) values savings, but cannot tolerate putting the part into Sleep, • Operating temperature may use this mode. The oscillator frequency will vary from unit-to-unit due There is a time delay associated with the transition to normal process parameter variation. The difference between fast and slow oscillator speeds. This oscillator in lead frame capacitance between package types will speed transition delay consists of two existing clock also affect the oscillation frequency, especially for low pulses and eight new speed clock pulses. During this CEXT values. The user also needs to account for the clock speed transition delay, the System Clock is halted tolerance of the external R and C components. causing the processor to be frozen in time. During this Figure14-5 shows how the R/C combination is delay, the program counter and the CLKOUT stop. connected. The OSCF bit in the PCON register is used to control Dual Speed mode. See Section4.2.2.6 “PCON FIGURE 14-5: RC OSCILLATOR MODE Register”, Register4-6. VDD 14.3 Reset PIC16F627A/628A/648A The PIC16F627A/628A/648A differentiates between REXT RA7/OSC1/ Internal various kinds of Reset: CLKIN Clock a) Power-on Reset (POR) CEXT b) MCLR Reset during normal operation VSS c) MCLR Reset during Sleep d) WDT Reset (normal operation) FOSC/4 RA6/OSC2/CLKOUT e) WDT wake-up (Sleep) f) Brown-out Reset (BOR) Recommended Values: 3kΩ ≤ REXT ≤ 100kΩ (VDD ≥ 3.0V) Some registers are not affected in any Reset condition; 10kΩ ≤ REXT ≤ 100kΩ (VDD < 3.0V) their status is unknown on POR and unchanged in any CEXT > 20 pF other Reset. Most other registers are reset to a “Reset state” on Power-on Reset, Brown-out Reset, MCLR The RC Oscillator mode has two options that control Reset, WDT Reset and MCLR Reset during Sleep. the unused OSC2 pin. The first allows it to be used as They are not affected by a WDT wake-up, since this is a general purpose I/O port. The other configures the viewed as the resumption of normal operation. TO and pin as an output providing the FOSC signal (internal PD bits are set or cleared differently in different Reset clock divided by 4) for test or external synchronization situations as indicated in Table14-4. These bits are purposes. used in software to determine the nature of the Reset. See Table14-7 for a full description of Reset states of 14.2.7 CLKOUT all registers. The PIC16F627A/628A/648A can be configured to A simplified block diagram of the on-chip Reset circuit provide a clock out signal by programming the is shown in Figure14-6. Configuration Word. The oscillator frequency, divided The MCLR Reset path has a noise filter to detect and by 4 can be used for test purposes or to synchronize ignore small pulses. See Table17-7 for pulse width other logic. specification. © 2009 Microchip Technology Inc. DS40044G-page 101

PIC16F627A/628A/648A FIGURE 14-6: SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT External Reset Schmitt Trigger Input MCLR/ VPP Pin Sleep WDT WDT Module Time-out Reset VDD Rise Detect Power-on Reset VDD Brown-out Reset S Q BOREN OST/PWRT OST Chip_Reset 10-bit Ripple-counter R Q OSC1/ CLKIN Pin PWRT On-chip(1) OSC 10-bit Ripple-counter Enable PWRT See Table14-3 for time out situations. Enable OST Note 1: This is a separate oscillator from the INTOSC/RC oscillator. DS40044G-page 102 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.4 Power-on Reset (POR), Power-up 14.4.3 OSCILLATOR START-UP TIMER Timer (PWRT), Oscillator Start-up (OST) Timer (OST) and Brown-out Reset The OST provides a 1024 oscillator cycle (from OSC1 (BOR) input) delay after the PWRT delay is over. Program execution will not start until the OST time out is 14.4.1 POWER-ON RESET (POR) complete. This ensures that the crystal oscillator or resonator has started and stabilized. The on-chip POR holds the part in Reset until a VDD rise is detected (in the range of 1.2-1.7V). A maxi- The OST time out is invoked only for XT, LP and HS mum rise time for VDD is required. See Section17.0 modes and only on Power-on Reset or wake-up from “Electrical Specifications” for details. Sleep. See Table17-7. The POR circuit does not produce an internal Reset 14.4.4 BROWN-OUT RESET (BOR) when VDD declines. The PIC16F627A/628A/648A have on-chip BOR When the device starts normal operation (exits the circuitry. A configuration bit, BOREN, can disable (if Reset condition), device operating parameters clear/programmed) or enable (if set) the BOR circuitry. (voltage, frequency, temperature, etc.) must be met to If VDD falls below VBOR for longer than TBOR, the ensure proper operation. If these conditions are not brown-out situation will reset the chip. A Reset is not met, the device must be held in Reset via MCLR, BOR assured if VDD falls below VBOR for shorter than TBOR. or PWRT until the operating conditions are met. VBOR and TBOR are defined in Table17-2 and For additional information, refer to Application Note Table17-7, respectively. AN607 “Power-up Trouble Shooting” (DS00607). On any Reset (Power-on, Brown-out, Watchdog, etc.), 14.4.2 POWER-UP TIMER (PWRT) the chip will remain in Reset until VDD rises above VBOR (see Figure14-7). The Power-up Timer will now The PWRT provides a fixed 72ms (nominal) time out be invoked, if enabled, and will keep the chip in Reset on power-up (POR) or if enabled from a Brown-out an additional 72ms. Reset. The PWRT operates on an internal RC oscilla- If VDD drops below VBOR while the Power-up Timer is tor. The chip is kept in Reset as long as PWRT is active. running, the chip will go back into a Brown-out Reset The PWRT delay allows the VDD to rise to an accept- and the Power-up Timer will be re-initialized. Once VDD able level. A configuration bit, PWRTE can disable (if rises above VBOR, the Power-Up Timer will execute a set) or enable (if cleared or programmed) the PWRT. It 72ms Reset. Figure14-7 shows typical brown-out is recommended that the PWRT be enabled when situations. Brown-out Reset is enabled. The power-up time delay will vary from chip-to-chip and due to VDD, temperature and process variation. See DC parameters Table17-7 for details. FIGURE 14-7: BROWN-OUT SITUATIONS WITH PWRT ENABLED VDD VBOR ≥ TBOR Internal 72 ms Reset VDD VBOR Internal <72 ms 72 ms Reset VDD VBOR Internal 72 ms Reset Note: 72 ms delay only if PWRTE bit is programmed to ‘0’. © 2009 Microchip Technology Inc. DS40044G-page 103

PIC16F627A/628A/648A 14.4.5 TIME OUT SEQUENCE 14.4.6 POWER CONTROL (PCON) STATUS REGISTER On power-up, the time out sequence is as follows: First PWRT time-out is invoked after POR has expired. Then The PCON/Status register, PCON (address 8Eh), has OST is activated. The total time out will vary based on two bits. oscillator configuration and PWRTE bit Status. For Bit 0 is BOR (Brown-out Reset). BOR is unknown on example, in RC mode with PWRTE bit set (PWRT Power-on Reset. It must then be set by the user and disabled), there will be no time out at all. Figure14-8, checked on subsequent Resets to see if BOR = 0 Figure14-11 and Figure14-12 depict time out indicating that a brown-out has occurred. The BOR sequences. Status bit is a “don’t care” and is not necessarily Since the time outs occur from the POR pulse, if MCLR predictable if the brown-out circuit is disabled (by is kept low long enough, the time outs will expire. Then setting BOREN bit = 0 in the Configuration Word). bringing MCLR high will begin execution immediately Bit 1 is POR (Power-on Reset). It is a ‘0’ on Power-on (see Figure14-11). This is useful for testing purposes Reset and unaffected otherwise. The user must write a or to synchronize more than one PIC16F627A/628A/ ‘1’ to this bit following a Power-on Reset. On a 648A device operating in parallel. subsequent Reset if POR is ‘0’, it will indicate that a Table14-6 shows the Reset conditions for some Power-on Reset must have occurred (VDD may have special registers, while Table14-7 shows the Reset gone too low). conditions for all the registers. TABLE 14-3: TIME OUT IN VARIOUS SITUATIONS Power-up Timer Brown-out Reset Wake-up from Oscillator Configuration PWRTE = 0 PWRTE = 1 PWRTE = 0 PWRTE = 1 Sleep XT, HS, LP 72 ms + 1024•TOSC 72 ms + 1024•TOSC 1024•TOSC 1024•TOSC 1024•TOSC RC, EC 72 ms — 72 ms — — INTOSC 72ms — 72ms — 6μs TABLE 14-4: STATUS/PCON BITS AND THEIR SIGNIFICANCE POR BOR TO PD Condition 0 X 1 1 Power-on Reset 0 X 0 X Illegal, TO is set on POR 0 X X 0 Illegal, PD is set on POR 1 0 X X Brown-out Reset 1 1 0 u WDT Reset 1 1 0 0 WDT Wake-up 1 1 u u MCLR Reset during normal operation 1 1 1 0 MCLR Reset during Sleep Legend: u = unchanged, x = unknown DS40044G-page 104 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 14-5: SUMMARY OF REGISTERS ASSOCIATED WITH BROWN-OUT RESET Value on all Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 other POR Reset Resets(1) 03h, 83h, STATUS IRP RP1 RPO TO PD Z DC C 0001 1xxx 000q quuu 103h, 183h 8Eh PCON — — — — OSCF — POR BOR ---- 1-0x ---- u-uq Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’, q = value depends upon condition. Shaded cells are not used by Brown-out Reset. Note 1: Other (non Power-up) Resets include MCLR Reset, Brown-out Reset and Watchdog Timer Reset during normal operation. TABLE 14-6: INITIALIZATION CONDITION FOR SPECIAL REGISTERS Program Status PCON Condition Counter Register Register Power-on Reset 000h 0001 1xxx ---- 1-0x MCLR Reset during normal operation 000h 000u uuuu ---- 1-uu MCLR Reset during Sleep 000h 0001 0uuu ---- 1-uu WDT Reset 000h 0000 uuuu ---- 1-uu WDT Wake-up PC + 1 uuu0 0uuu ---- u-uu Brown-out Reset 000h 000x xuuu ---- 1-u0 Interrupt Wake-up from Sleep PC + 1(1) uuu1 0uuu ---- u-uu Legend: u = unchanged, x = unknown, - = unimplemented bit, reads as ‘0’. Note 1: When the wake-up is due to an interrupt and global enable bit, GIE is set, the PC is loaded with the interrupt vector (0004h) after execution of PC + 1. © 2009 Microchip Technology Inc. DS40044G-page 105

PIC16F627A/628A/648A TABLE 14-7: INITIALIZATION CONDITION FOR REGISTERS • MCLR Reset during normal • Wake-up from Sleep(7) through operation interrupt Register Address Power-on Reset • MCLR Reset during Sleep • Wake-up from Sleep(7) through • WDT Reset WDT time out • Brown-out Reset (1) W — xxxx xxxx uuuu uuuu uuuu uuuu INDF 00h, 80h, — — — 100h, 180h TMR0 01h, 101h xxxx xxxx uuuu uuuu uuuu uuuu PCL 02h, 82h, 0000 0000 0000 0000 PC + 1(3) 102h, 182h STATUS 03h, 83h, 0001 1xxx 000q quuu(4) uuuq 0uuu(4) 103h, 183h FSR 04h, 84h, xxxx xxxx uuuu uuuu uuuu uuuu 104h, 184h PORTA 05h xxxx 0000 xxxx 0000 uuuu uuuu PORTB 06h, 106h xxxx xxxx uuuu uuuu uuuu uuuu PCLATH 0Ah, 8Ah, ---0 0000 ---0 0000 ---u uuuu 10Ah, 18Ah INTCON 0Bh, 8Bh, 0000 000x 0000 000u uuuu uqqq(2) 10Bh,18Bh PIR1 0Ch 0000 -000 0000 -000 qqqq -qqq(2) TMR1L 0Eh xxxx xxxx uuuu uuuu uuuu uuuu TMR1H 0Fh xxxx xxxx uuuu uuuu uuuu uuuu T1CON 10h --00 0000 --uu uuuu(6) --uu uuuu TMR2 11h 0000 0000 0000 0000 uuuu uuuu T2CON 12h -000 0000 -000 0000 -uuu uuuu CCPR1L 15h xxxx xxxx uuuu uuuu uuuu uuuu CCPR1H 16h xxxx xxxx uuuu uuuu uuuu uuuu CCP1CON 17h --00 0000 --00 0000 --uu uuuu RCSTA 18h 0000 000x 0000 000x uuuu uuuu TXREG 19h 0000 0000 0000 0000 uuuu uuuu RCREG 1Ah 0000 0000 0000 0000 uuuu uuuu CMCON 1Fh 0000 0000 0000 0000 uu-- uuuu OPTION 81h,181h 1111 1111 1111 1111 uuuu uuuu TRISA 85h 1111 1111 1111 1111 uuuu uuuu TRISB 86h, 186h 1111 1111 1111 1111 uuuu uuuu PIE1 8Ch 0000 -000 0000 -000 uuuu -uuu PCON 8Eh ---- 1-0x ---- 1-uq(1,5) ---- u-uu PR2 92h 1111 1111 1111 1111 uuuu uuuu TXSTA 98h 0000 -010 0000 -010 uuuu -uuu SPBRG 99h 0000 0000 0000 0000 uuuu uuuu EEDATA 9Ah xxxx xxxx uuuu uuuu uuuu uuuu EEADR 9Bh xxxx xxxx uuuu uuuu uuuu uuuu EECON1 9Ch ---- x000 ---- q000 ---- uuuu EECON2 9Dh — — — VRCON 9Fh 000- 0000 000- 0000 uuu- uuuu Legend: u = unchanged, x = unknown, - = unimplemented bit, reads as ‘0’, q = value depends on condition. Note 1: If VDD goes too low, Power-on Reset will be activated and registers will be affected differently. 2: One or more bits in INTCON and PIR1 will be affected (to cause wake-up). 3: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector(0004h). 4: See Table14-6 for Reset value for specific condition. 5: If Reset was due to brown-out, then bit 0 = 0. All other Resets will cause bit 0 = u. 6: Reset to ‘--00 0000’ on a Brown-out Reset (BOR). 7: Peripherals generating interrupts for wake-up from Sleep will change the resulting bits in the associated registers. DS40044G-page 106 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 14-8: TIME OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE VDD MCLR Internal POR TPWRT PWRT Time Out TOST OST Time Out Internal Reset FIGURE 14-9: TIME OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 2 VDD MCLR Internal POR TPWRT PWRT Time Out TOST OST Time Out Internal Reset FIGURE 14-10: TIME OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD) VDD MCLR Internal POR TPWRT PWRT Time Out TOST OST Time Out Internal Reset © 2009 Microchip Technology Inc. DS40044G-page 107

PIC16F627A/628A/648A FIGURE 14-11: EXTERNAL POWER-ON FIGURE 14-13: EXTERNAL BROWN-OUT RESET CIRCUIT (FOR PROTECTION CIRCUIT 2 SLOW VDD POWER-UP) VDD VDD VDD VDD R1 Q1 D R PIC16F627A/628A/648A MCLR R1 R2 40k PIC16F627A/628A/648A MCLR C Note 1: This brown-out circuit is less expensive, albeit less accurate. Transistor Q1 turns off Note 1: External Power-on Reset circuit is required when VDD is below a certain level such that: only if VDD power-up slope is too slow. The diode D helps discharge the capacitor R1 VDD x = 0.7 V quickly when VDD powers down. R1 + R2 R1 2: R < 40 kΩ is recommended to make sure 2: Intern xal Brown-out Rese=t s0h.7o uVld be that voltage drop across R does not violate R1 + R2 disabled when using this circuit. the device’s electrical specification. 3: Resistors should be adjusted for the 3: R1 = 100Ω to 1 kΩ will limit any current characteristics of the transistor. flowing into MCLR from external capacitor C in the event of MCLR/VPP pin break- down due to Electrostatic Discharge (ESD) or Electrical Overstress (EOS). FIGURE 14-12: EXTERNAL BROWN-OUT PROTECTION CIRCUIT 1 VDD VDD 33k 10k MCLR 40k PIC16F627A/628A/648A Note 1: This circuit will activate Reset when VDD goes below (Vz + 0.7V) where Vz=Zener voltage. 2: Internal Brown-out Reset circuitry should be disabled when using this circuit. DS40044G-page 108 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.5 Interrupts When an interrupt is responded to, the GIE is cleared to disable any further interrupt, the return address is The PIC16F627A/628A/648A has 10 sources of pushed into the stack and the PC is loaded with 0004h. interrupt: Once in the interrupt service routine, the source(s) of • External Interrupt RB0/INT the interrupt can be determined by polling the interrupt • TMR0 Overflow Interrupt flag bits. The interrupt flag bit(s) must be cleared in software before re-enabling interrupts to avoid RB0/ • PORTB Change Interrupts (pins RB<7:4>) INT recursive interrupts. • Comparator Interrupt For external interrupt events, such as the INT pin or • USART Interrupt TX PORTB change interrupt, the interrupt latency will be • USART Interrupt RX three or four instruction cycles. The exact latency • CCP Interrupt depends when the interrupt event occurs (Figure14-15). • TMR1 Overflow Interrupt The latency is the same for one or two-cycle instructions. • TMR2 Match Interrupt Once in the interrupt service routine, the source(s) of the interrupt can be determined by polling the interrupt flag • Data EEPROM Interrupt bits. The interrupt flag bit(s) must be cleared in software The Interrupt Control register (INTCON) records before re-enabling interrupts to avoid multiple interrupt individual interrupt requests in flag bits. It also has requests. individual and global interrupt enable bits. Note1: Individual interrupt flag bits are set A Global Interrupt Enable bit, GIE (INTCON<7>) regardless of the status of their enables (if set) all un-masked interrupts or disables (if corresponding mask bit or the GIE bit. cleared) all interrupts. Individual interrupts can be disabled through their corresponding enable bits in 2: When an instruction that clears the GIE bit is executed, any interrupts that were INTCON register. GIE is cleared on Reset. pending for execution in the next cycle The “return-from-interrupt” instruction, RETFIE, exits are ignored. The CPU will execute a NOP interrupt routine as well as sets the GIE bit, which re- in the cycle immediately following the enables RB0/INT interrupts. instruction which clears the GIE bit. The The INT pin interrupt, the RB port change interrupt and interrupts which were ignored are still the TMR0 overflow interrupt flags are contained in the pending to be serviced when the GIE bit INTCON register. is set again. The peripheral interrupt flag is contained in the special register PIR1. The corresponding interrupt enable bit is contained in special registers PIE1. FIGURE 14-14: INTERRUPT LOGIC TMR1IF T0IF Wake-up (if in Sleep mode)(1) TMR1IE T0IE TMR2IF INTF TMR2IE INTE CCP1IF RBIF CCP1IE RBIE Interrupt to CPU CMIF CMIE PEIE TXIF TXIE RCIF RCIE GIE EEIF EEIE Note1: Some peripherals depend upon the system clock for operation. Since the system clock is suspended during Sleep, only those peripherals which do not depend upon the system clock will wake the part from Sleep. See Section14.8.1 “Wake-up from Sleep”. © 2009 Microchip Technology Inc. DS40044G-page 109

PIC16F627A/628A/648A 14.5.1 RB0/INT INTERRUPT 14.5.3 PORTB INTERRUPT External interrupt on the RB0/INT pin is edge triggered; An input change on PORTB <7:4> sets the RBIF either rising if INTEDG bit (OPTION<6>) is set, or (INTCON<0>) bit. The interrupt can be enabled/disabled falling, if INTEDG bit is clear. When a valid edge by setting/clearing the RBIE (INTCON<3>) bit. For appears on the RB0/INT pin, the INTF bit operation of PORTB (Section5.2 “PORTB and TRISB (INTCON<1>) is set. This interrupt can be disabled by Registers”). clearing the INTE control bit (INTCON<4>). The INTF Note: If a change on the I/O pin should occur bit must be cleared in software in the interrupt service when the read operation is being executed routine before re-enabling this interrupt. The RB0/INT (starts during the Q2 cycle and ends before interrupt can wake-up the processor from Sleep, if the the start of the Q3 cycle), then the RBIF INTE bit was set prior to going into Sleep. The status of interrupt flag may not get set. the GIE bit decides whether or not the processor branches to the interrupt vector following wake-up. See 14.5.4 COMPARATOR INTERRUPT Section14.8 “Power-Down Mode (Sleep)” for details on Sleep, and Figure14-17 for timing of wake-up from See Section10.6 “Comparator Interrupts” for Sleep through RB0/INT interrupt. complete description of comparator interrupts. 14.5.2 TMR0 INTERRUPT An overflow (FFh → 00h) in the TMR0 register will set the T0IF (INTCON<2>) bit. The interrupt can be enabled/ disabled by setting/clearing T0IE (INTCON<5>) bit. For operation of the Timer0 module, see Section6.0 “Timer0 Module”. FIGURE 14-15: INT PIN INTERRUPT TIMING Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 (3) CLKOUT (4) INT pin (1) INTF flag (1) (5) Interrupt Latency(2) (INTCON<1>) GIE bit (INTCON<7>) Instruction Flow PC PC PC + 1 PC + 1 0004h 0005h Instruction Fetched Inst (PC) Inst (PC + 1) — Inst (0004h) Inst (0005h) Instruction Inst (PC - 1) Inst (PC) Dummy Cycle Dummy Cycle Inst (0004h) Executed Note 1: INTF flag is sampled here (every Q1). 2: Asynchronous interrupt latency = 3-4 TCY. Synchronous latency = 3 TCY, where TCY = instruction cycle time. Latency is the same whether Inst (PC) is a single cycle or a two-cycle instruction. 3: CLKOUT is available in RC and INTOSC oscillator mode. 4: For minimum width of INT pulse, refer to AC specs. 5: INTF is enabled to be set anytime during the Q4-Q1 cycles. DS40044G-page 110 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 14-8: SUMMARY OF INTERRUPT REGISTERS Value on all Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 other POR Reset Resets(1) 0Bh, 8Bh, INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u 10Bh, 18Bh 0Ch PIR1 EEIF CMIF RCIF TXIF — CCP1IF TMR2IF TMR1IF 0000 -000 0000 -000 8Ch PIE1 EEIE CMIE RCIE TXIE — CCP1IE TMR2IE TMR1IE 0000 -000 0000 -000 Note 1: Other (non Power-up) Resets include MCLR Reset, Brown-out Reset and Watchdog Timer Reset during normal operation. 14.6 Context Saving During Interrupts 14.7 Watchdog Timer (WDT) During an interrupt, only the return PC value is saved The Watchdog Timer is a free running on-chip RC on the stack. Typically, users may wish to save key oscillator which does not require any external registers during an interrupt (e.g., W register and components. This RC oscillator is separate from the Status register). This must be implemented in software. RC oscillator of the CLKIN pin. That means that the WDT will run, even if the clock on the OSC1 and OSC2 Example14-1 stores and restores the Status and W pins of the device has been stopped, for example, by registers. The user register, W_TEMP, must be defined execution of a SLEEP instruction. During normal in a common memory location (i.e., W_TEMP is operation, a WDT time out generates a device Reset. If defined at 0x70 in Bank 0 and is therefore, accessible the device is in Sleep mode, a WDT time out causes at 0xF0, 0x170 and 0x1F0). The Example14-1: the device to wake-up and continue with normal • Stores the W register operation. The WDT can be permanently disabled by • Stores the Status register programming the configuration bit WDTE as clear • Executes the ISR code (Section14.1 “Configuration Bits”). • Restores the Status (and bank select bit register) 14.7.1 WDT PERIOD • Restores the W register The WDT has a nominal time-out period of 18 ms (with EXAMPLE 14-1: SAVING THE STATUS no prescaler). The time-out periods vary with AND W REGISTERS IN temperature, VDD and process variations from part to part (see DC Specifications, Table17-7). If longer time- RAM out periods are desired, a postscaler with a division ratio MOVWF W_TEMP ;copy W to temp register, of up to 1:128 can be assigned to the WDT under ;could be in any bank software control by writing to the OPTION register. Thus, SWAPF STATUS,W ;swap status to be saved time-out periods up to 2.3 seconds can be realized. ;into W BCF STATUS,RP0 ;change to bank 0 The CLRWDT and SLEEP instructions clear the WDT ;regardless of current and the postscaler, if assigned to the WDT, and prevent ;bank it from timing out and generating a device Reset. MOVWF STATUS_TEMP;save status to bank 0 The TO bit in the Status register will be cleared upon a ;register : Watchdog Timer time out. :(ISR) : 14.7.2 WDT PROGRAMMING CONSIDERATIONS SWAPF STATUS_TEMP,W;swap STATUS_TEMP It should also be taken in account that under worst case register ;into W, sets bank to conditions (VDD = Min., Temperature = Max., max. original WDT prescaler) it may take several seconds before a ;state WDT time out occurs. MOVWF STATUS ;move W into STATUS ;register SWAPF W_TEMP,F ;swap W_TEMP SWAPF W_TEMP,W ;swap W_TEMP into W © 2009 Microchip Technology Inc. DS40044G-page 111

PIC16F627A/628A/648A FIGURE 14-16: WATCHDOG TIMER BLOCK DIAGRAM From TMR0 Clock Source (Figure6-1) 0 M WDT Postscaler/ U TMR0 Prescaler Watchdog 1X Timer 8 8 to 1 MUX PS<2:0> PSA 3 WDT Enable Bit To TMR0 (Figure6-1) 0 1 MUX PSA WDT Time-out Note: T0SE, T0CS, PSA, PS0-PS2 are bits in the OPTION register. TABLE 14-9: SUMMARY OF WATCHDOG TIMER REGISTERS Value on Value on Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 all other POR Reset Resets 2007h CONFIG LVP BOREN MCLRE FOSC2 PWRTE WDTE FOSC1 FOSC0 uuuu uuuu uuuu uuuu 81h, 181h OPTION RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111 Legend: x = unknown, u = unchanged, - = unimplemented read as ‘0’, q = value depends upon condition. Note: Shaded cells are not used by the Watchdog Timer. 14.8 Power-Down Mode (Sleep) For lowest current consumption in this mode, all I/O pins should be either at VDD or VSS with no external The Power-down mode is entered by executing a circuitry drawing current from the I/O pin and the SLEEP instruction. comparators, and VREF should be disabled. I/O pins If enabled, the Watchdog Timer will be cleared but that are high-impedance inputs should be pulled high keeps running, the PD bit in the Status register is or low externally to avoid switching currents caused by cleared, the TO bit is set, and the oscillator driver is floating inputs. The T0CKI input should also be at VDD turned off. The I/O ports maintain the status they had, or VSS for lowest current consumption. The before SLEEP was executed (driving high, low or high- contribution from on chip pull-ups on PORTB should be impedance). considered. The MCLR pin must be at a logic high level (VIHMC). Note: It should be noted that a Reset generated by a WDT time-out does not drive MCLR pin low. DS40044G-page 112 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.8.1 WAKE-UP FROM SLEEP When the SLEEP instruction is being executed, the next instruction (PC + 1) is pre-fetched. For the device to The device can wake-up from Sleep through one of the wake-up through an interrupt event, the corresponding following events: interrupt enable bit must be set (enabled). Wake-up is 1. External Reset input on MCLR pin regardless of the state of the GIE bit. If the GIE bit is 2. Watchdog Timer wake-up (if WDT was enabled) clear (disabled), the device continues execution at the 3. Interrupt from RB0/INT pin, RB port change, or instruction after the SLEEP instruction. If the GIE bit is any peripheral interrupt, which is active in Sleep. set (enabled), the device executes the instruction after the SLEEP instruction and then branches to the The first event will cause a device Reset. The two latter interrupt address (0004h). In cases where the events are considered a continuation of program execution of the instruction following SLEEP is not execution. The TO and PD bits in the Status register desirable, the user should have an NOP after the SLEEP can be used to determine the cause of device Reset. instruction. PD bit, which is set on power-up, is cleared when Sleep is invoked. TO bit is cleared if WDT wake-up occurred. Note: If the global interrupts are disabled (GIE is cleared), but any interrupt source has both its interrupt enable bit and the corresponding interrupt flag bits set, the device will not enter Sleep. The SLEEP instruction is executed as a NOP instruction. The WDT is cleared when the device wakes up from Sleep, regardless of the source of wake-up. FIGURE 14-17: WAKE-UP FROM SLEEP THROUGH INTERRUPT Q1 Q2 Q3 Q4 Q1Q2 Q3 Q4 Q1 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 CLKOUT(4) TOST(1,2) INT pin INTF flag (INTCON<1>) Interrupt Latency (Note 2) GIE bit Processor in (INTCON<7>) Sleep Instruction Flow PC PC PC + 1 PC + 2 PC + 2 PC + 2 0004h(3) 0005h IFnesttcrhuectdion Inst(PC) = Sleep Inst(PC + 1) Inst(PC + 2) Inst(0004h) Inst(0005h) EInxsetrcuuctteiodn Inst(PC - 1) Sleep Inst(PC + 1) Dummy cycle Dummy cycle Inst(0004h) Note 1: XT, HS or LP Oscillator mode assumed. 2: TOST = 1024 TOSC (drawing not to scale). Approximately 1 μs delay will be there for RC Oscillator mode. 3: GIE = 1 assumed. In this case, after wake-up the processor jumps to the interrupt routine. If GIE = 0, execution will continue in-line. 4: CLKOUT is not available in these Oscillator modes, but shown here for timing reference. 14.9 Code Protection 14.10 User ID Locations With the Code-Protect bit is cleared (Code-Protect Four memory locations (2000h-2003h) are designated enabled), the contents of the program memory as user ID locations where the user can store locations are read out as ‘0’. See “PIC16F627A/628A/ checksum or other code-identification numbers. These 648A EEPROM Memory Programming Specification” locations are not accessible during normal execution (DS41196) for details. but are readable and writable during Program/Verify. Only the Least Significant 4 bits of the user ID locations Note: Only a Bulk Erase function can set the CP are used for checksum calculations although each and CPD bits by turning off the code location has 14 bits. protection. The entire data EEPROM and Flash program memory will be erased to turn the code protection off. © 2009 Microchip Technology Inc. DS40044G-page 113

PIC16F627A/628A/648A 14.11 In-Circuit Serial Programming™ 14.12 Low-Voltage Programming (ICSP™) The LVP bit of the Configuration Word, enables the low- The PIC16F627A/628A/648A microcontrollers can be voltage programming. This mode allows the serially programmed while in the end application circuit. microcontroller to be programmed via ICSP using only This is simply done with two lines for clock and data, a 5V source. This mode removes the requirement of and three other lines for power, ground and the VIHH to be placed on the MCLR pin. The LVP bit is programming voltage. This allows customers to normally erased to ‘1’ which enables the low-voltage manufacture boards with unprogrammed devices and programming. In this mode, the RB4/PGM pin is then program the microcontroller just before shipping dedicated to the programming function and ceases to the product. This also allows the most recent firmware be a general purpose I/O pin. The device will enter or custom firmware to be programmed. Programming mode when a ‘1’ is placed on the RB4/ PGM pin. The High-Voltage Programming mode is still The device is placed into a Program/Verify mode by available by placing VIHH on the MCLR pin. holding the RB6 and RB7 pins low while raising the MCLR (VPP) pin from VIL to VIHH. See “PIC16F627A/ Note1: While in this mode, the RB4 pin can no 628A/648A EEPROM Memory Programming longer be used as a general purpose I/O Specification” (DS41196) for details. RB6 becomes the pin. programming clock and RB7 becomes the programming 2: VDD must be 5.0V +10% during erase data. Both RB6 and RB7 are Schmitt Trigger inputs in operations. this mode. If Low-Voltage Programming mode is not used, the After Reset, to place the device into Programming/Verify LVP bit should be programmed to a ‘0’ so that RB4/ mode, the Program Counter (PC) is at location 00h. A PGM becomes a digital I/O pin. To program the device, 6-bit command is then supplied to the device. Depending VIHH must be placed onto MCLR during programming. on the command, 14 bits of program data are then The LVP bit may only be programmed when program- supplied to or from the device, depending if the command ming is entered with VIHH on MCLR. The LVP bit was a load or a read. For complete details of serial cannot be programmed when programming is entered programming, please refer to “PIC16F627A/628A/648A with RB4/PGM. EEPROM Memory Programming Specification” (DS41196). It should be noted, that once the LVP bit is programmed to ‘0’, only High-Voltage Programming mode can be A typical In-Circuit Serial Programming connection is used to program the device. shown in Figure14-18. FIGURE 14-18: TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION To Normal Connections External Connector PIC16F627A/628A/648A Signals +5V VDD 0V VSS VPP RA5/MCLR/VPP CLK RB6/PGC Data I/O RB7/PGD VDD To Normal Connections DS40044G-page 114 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 14.13 In-Circuit Debugger Since in-circuit debugging requires the loss of clock, data and MCLR pins, MPLAB® ICD 2 development with an 18-pin device is not practical. A special 28-pin PIC16F648A-ICD device is used with MPLAB ICD 2 to provide separate clock, data and MCLR pins and frees all normally available pins to the user. Debugging of all three versions of the PIC16F627A/628A/648A is supported by the PIC16F648A-ICD. This special ICD device is mounted on the top of a header and its signals are routed to the MPLAB ICD 2 connector. On the bottom of the header is an 18-pin socket that plugs into the user’s target via an 18-pin stand-off connector. When the ICD pin on the PIC16F648A-ICD device is held low, the In-Circuit Debugger functionality is enabled. This function allows simple debugging functions when used with MPLAB ICD 2. When the microcontroller has this feature enabled, some of the resources are not available for general use. Table14-19 shows which features are consumed by the background debugger. TABLE 14-19: DEBUGGER RESOURCES I/O pins ICDCLK, ICDDATA Stack 1 level Program Memory Address 0h must be NOP 300h-3FEh The PIC16F648A-ICD device with header is supplied as an assembly. See Microchip Part Number AC162053. © 2009 Microchip Technology Inc. DS40044G-page 115

PIC16F627A/628A/648A NOTES: DS40044G-page 116 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 15.0 INSTRUCTION SET SUMMARY The instruction set is highly orthogonal and is grouped into three basic categories: Each PIC16F627A/628A/648A instruction is a 14-bit • Byte-oriented operations word divided into an OPCODE which specifies the instruction type and one or more operands which • Bit-oriented operations further specify the operation of the instruction. The • Literal and control operations PIC16F627A/628A/648A instruction set summary in All instructions are executed within one single Table15-2 lists byte-oriented, bit-oriented, and instruction cycle, unless a conditional test is true or the literal and control operations. Table15-1 shows the program counter is changed as a result of an opcode field descriptions. instruction. In this case, the execution takes two For byte-oriented instructions, ‘f’ represents a file instruction cycles with the second cycle executed as a register designator and ‘d’ represents a destination NOP. One instruction cycle consists of four oscillator designator. The file register designator specifies which periods. Thus, for an oscillator frequency of 4MHz, the file register is to be used by the instruction. normal instruction execution time is 1μs. If a conditional test is true or the program counter is The destination designator specifies where the result of changed as a result of an instruction, the instruction the operation is to be placed. If ‘d’ is zero, the result is execution time is 2 μs. placed in the W register. If ‘d’ is one, the result is placed in the file register specified in the instruction. Table15-2 lists the instructions recognized by the MPASM™ assembler. For bit-oriented instructions, ‘b’ represents a bit field designator which selects the number of the bit affected Figure15-1 shows the three general formats that the by the operation, while ‘f’ represents the number of the instructions can have. file in which the bit is located. Note1: Any unused opcode is reserved. Use of For literal and control operations, ‘k’ represents an any reserved opcode may cause unex- eight or eleven bit constant or literal value. pected operation. 2: To maintain upward compatibility with 15.1 Read-Modify-Write Operations future PIC MCU products, do not use the OPTION and TRIS instructions. Any instruction that specifies a file register as part of the instruction performs a Read-Modify-Write (R-M-W) All examples use the following format to represent a operation. The register is read, the data is modified, hexadecimal number: and the result is stored according to either the instruc- 0xhh tion, or the destination designator ‘d’. A read operation is performed on a register even if the instruction writes where ‘h’ signifies a hexadecimal digit. to that register. FIGURE 15-1: GENERAL FORMAT FOR For example, a “clrf PORTB” instruction will read INSTRUCTIONS PORTB, clear all the data bits, then write the result back to PORTB. This example would have the unin- Byte-oriented file register operations tended result that the condition that sets the RBIF flag 13 8 7 6 0 would be cleared for pins configured as inputs and OPCODE d f (FILE #) using the PORTB interrupt-on-change feature. d = 0 for destination W d = 1 for destination f TABLE 15-1: OPCODE FIELD f = 7-bit file register address DESCRIPTIONS Bit-oriented file register operations Field Description 13 109 76 0 OPCODE b (BIT #) f (FILE #) f Register file address (0x00 to 0x7F) W Working register (accumulator) b = 3-bit bit address b Bit address within an 8-bit file register f = 7-bit file register address k Literal field, constant data or label Literal and control operations x Don’t care location (= 0 or 1) General The assembler will generate code with x = 0. It is the 13 8 7 0 recommended form of use for compatibility with all OPCODE k (literal) Microchip software tools. d Destination select; d = 0: store result in W, k = 8-bit immediate value d = 1: store result in file register f. CALL and GOTO instructions only Default is d = 1 13 11 10 0 TO Time-out bit OPCODE k (literal) PD Power-down bit k = 11-bit immediate value © 2009 Microchip Technology Inc. DS40044G-page 117

PIC16F627A/628A/648A TABLE 15-2: PIC16F627A/628A/648A INSTRUCTION SET 14-Bit Opcode Mnemonic, Status Description Cycles Notes Operands Affected MSb LSb BYTE-ORIENTED FILE REGISTER OPERATIONS ADDWF f, d Add W and f 1 00 0111 dfff ffff C,DC,Z 1, 2 ANDWF f, d AND W with f 1 00 0101 dfff ffff Z 1, 2 CLRF f Clear f 1 00 0001 lfff ffff Z 2 CLRW — Clear W 1 00 0001 0xxx xxxx Z COMF f, d Complement f 1 00 1001 dfff ffff Z 1, 2 DECF f, d Decrement f 1 00 0011 dfff ffff Z 1, 2 DECFSZ f, d Decrement f, Skip if 0 1(2) 00 1011 dfff ffff 1, 2, 3 INCF f, d Increment f 1 00 1010 dfff ffff Z 1, 2 INCFSZ f, d Increment f, Skip if 0 1(2) 00 1111 dfff ffff 1, 2, 3 IORWF f, d Inclusive OR W with f 1 00 0100 dfff ffff Z 1, 2 MOVF f, d Move f 1 00 1000 dfff ffff Z 1, 2 MOVWF f Move W to f 1 00 0000 lfff ffff NOP — No Operation 1 00 0000 0xx0 0000 RLF f, d Rotate Left f through Carry 1 00 1101 dfff ffff C 1, 2 RRF f, d Rotate Right f through Carry 1 00 1100 dfff ffff C 1, 2 SUBWF f, d Subtract W from f 1 00 0010 dfff ffff C,DC,Z 1, 2 SWAPF f, d Swap nibbles in f 1 00 1110 dfff ffff 1, 2 XORWF f, d Exclusive OR W with f 1 00 0110 dfff ffff Z 1, 2 BIT-ORIENTED FILE REGISTER OPERATIONS BCF f, b Bit Clear f 1 01 00bb bfff ffff 1, 2 BSF f, b Bit Set f 1 01 01bb bfff ffff 1, 2 BTFSC f, b Bit Test f, Skip if Clear 1(2) 01 10bb bfff ffff 3 BTFSS f, b Bit Test f, Skip if Set 1(2) 01 11bb bfff ffff 3 LITERAL AND CONTROL OPERATIONS ADDLW k Add literal and W 1 11 111x kkkk kkkk C,DC,Z ANDLW k AND literal with W 1 11 1001 kkkk kkkk Z CALL k Call subroutine 2 10 0kkk kkkk kkkk CLRWDT — Clear Watchdog Timer 1 00 0000 0110 0100 TO,PD GOTO k Go to address 2 10 1kkk kkkk kkkk IORLW k Inclusive OR literal with W 1 11 1000 kkkk kkkk Z MOVLW k Move literal to W 1 11 00xx kkkk kkkk RETFIE — Return from interrupt 2 00 0000 0000 1001 RETLW k Return with literal in W 2 11 01xx kkkk kkkk RETURN — Return from Subroutine 2 00 0000 0000 1000 SLEEP — Go into Standby mode 1 00 0000 0110 0011 TO,PD SUBLW k Subtract W from literal 1 11 110x kkkk kkkk C,DC,Z XORLW k Exclusive OR literal with W 1 11 1010 kkkk kkkk Z Note 1: When an I/O register is modified as a function of itself (e.g., MOVF PORTB, 1), the value used will be that value present on the pins themselves. For example, if the data latch is ‘1’ for a pin configured as input and is driven low by an external device, the data will be written back with a ‘0’. 2: If this instruction is executed on the TMR0 register (and, where applicable, d = 1), the prescaler will be cleared if assigned to the Timer0 Module. 3: If Program Counter (PC) is modified or a conditional test is true, the instruction requires two cycles. The second cycle is executed as a NOP. DS40044G-page 118 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 15.2 Instruction Descriptions ADDLW Add Literal and W ANDLW AND Literal with W Syntax: [ label ] ADDLW k Syntax: [ label ] ANDLW k Operands: 0 ≤ k ≤ 255 Operands: 0 ≤ k ≤ 255 Operation: (W) + k → (W) Operation: (W) .AND. (k) → (W) Status Affected: C, DC, Z Status Affected: Z Encoding: 11 111x kkkk kkkk Encoding: 11 1001 kkkk kkkk Description: The contents of the W register Description: The contents of W register are are added to the eight bit literal AND’ed with the eight bit literal ‘k’ and the result is placed in the ‘k’. The result is placed in the W W register. register. Words: 1 Words: 1 Cycles: 1 Cycles: 1 Example ADDLW 0x15 Example ANDLW 0x5F Before Instruction W = 0x10 Before Instruction After Instruction W = 0xA3 W = 0x25 After Instruction W = 0x03 ADDWF Add W and f ANDWF AND W with f Syntax: [ label ] ADDWF f,d Syntax: [ label ] ANDWF f,d Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] d ∈ [0,1] Operation: (W) + (f) → (dest) Operation: (W) .AND. (f) → (dest) Status Affected: C, DC, Z Status Affected: Z Encoding: 00 0111 dfff ffff Encoding: 00 0101 dfff ffff Description: Add the contents of the W Description: AND the W register with register register with register ‘f’. If ‘d’ is ‘f’. If ‘d’ is ‘0’, the result is stored ‘0’, the result is stored in the W in the W register. If ‘d’ is ‘1’, the register. If ‘d’ is ‘1’, the result is result is stored back in register stored back in register ‘f’. ‘f’. Words: 1 Words: 1 Cycles: 1 Cycles: 1 Example ADDWF REG1, 0 Example ANDWF REG1, 1 Before Instruction Before Instruction W = 0x17 W = 0x17 REG1= 0xC2 REG1 = 0xC2 After Instruction After Instruction W = 0xD9 W = 0x17 REG1= 0xC2 REG1 = 0x02 Z = 0 C = 0 DC = 0 © 2009 Microchip Technology Inc. DS40044G-page 119

PIC16F627A/628A/648A BCF Bit Clear f BTFSC Bit Test f, Skip if Clear Syntax: [ label ] BCF f,b Syntax: [ label ] BTFSC f,b Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ f ≤ 127 0 ≤ b ≤ 7 0 ≤ b ≤ 7 Operation: 0 → (f<b>) Operation: skip if (f<b>) = 0 Status Affected: None Status Affected: None Encoding: 01 00bb bfff ffff Encoding: 01 10bb bfff ffff Description: Bit ‘b’ in register ‘f’ is cleared. Description: If bit ‘b’ in register ‘f’ is ‘0’, then the next instruction is skipped. Words: 1 If bit ‘b’ is ‘0’, then the next Cycles: 1 instruction fetched during the Example BCF REG1, 7 current instruction execution is discarded, and a NOP is executed Before Instruction instead, making this a two-cycle REG1 = 0xC7 instruction. After Instruction REG1 = 0x47 Words: 1 Cycles: 1(2) Example HERE BTFSC REG1 BSF Bit Set f FALSE GOTO PROCESS_CODE TRUE (cid:129) Syntax: [ label ] BSF f,b (cid:129) Operands: 0 ≤ f ≤ 127 (cid:129) 0 ≤ b ≤ 7 Before Instruction Operation: 1 → (f<b>) PC = address HERE After Instruction Status Affected: None if REG<1> = 0, Encoding: 01 01bb bfff ffff PC = address TRUE Description: Bit ‘b’ in register ‘f’ is set. if REG<1> =1, PC = address FALSE Words: 1 Cycles: 1 Example BSF REG1, 7 Before Instruction REG1 = 0x0A After Instruction REG1 = 0x8A DS40044G-page 120 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A BTFSS Bit Test f, Skip if Set CALL Call Subroutine Syntax: [ label ] BTFSS f,b Syntax: [ label ] CALL k Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ k ≤ 2047 0 ≤ b < 7 Operation: (PC)+ 1→ TOS, Operation: skip if (f<b>) = 1 k → PC<10:0>, (PCLATH<4:3>) → PC<12:11> Status Affected: None Status Affected: None Encoding: 01 11bb bfff ffff Encoding: 10 0kkk kkkk kkkk Description: If bit ‘b’ in register ‘f’ is ‘1’, then the next instruction is skipped. Description: Call Subroutine. First, return If bit ‘b’ is ‘1’, then the next address (PC + 1) is pushed onto instruction fetched during the the stack. The eleven bit imme- current instruction execution, is diate address is loaded into PC discarded and a NOP is executed bits <10:0>. The upper bits of instead, making this a two-cycle the PC are loaded from instruction. PCLATH. CALL is a two-cycle instruction. Words: 1 Words: 1 Cycles: 1(2) Cycles: 2 Example HERE BTFSS REG1 FALSE GOTO PROCESS_CODE Example HERE CALL THERE TRUE (cid:129) Before Instruction (cid:129) (cid:129) PC = Address HERE After Instruction Before Instruction PC = Address THERE PC = address HERE TOS = Address HERE+1 After Instruction if FLAG<1> = 0, PC = address FALSE if FLAG<1> = 1, CLRF Clear f PC = address TRUE Syntax: [ label ] CLRF f Operands: 0 ≤ f ≤ 127 Operation: 00h → (f) 1 → Z Status Affected: Z Encoding: 00 0001 1fff ffff Description: The contents of register ‘f’ are cleared and the Z bit is set. Words: 1 Cycles: 1 Example CLRF REG1 Before Instruction REG1 = 0x5A After Instruction REG1 = 0x00 Z = 1 © 2009 Microchip Technology Inc. DS40044G-page 121

PIC16F627A/628A/648A CLRW Clear W COMF Complement f Syntax: [ label ] CLRW Syntax: [ label ] COMF f,d Operands: None Operands: 0 ≤ f ≤ 127 d ∈ [0,1] Operation: 00h → (W) 1 → Z Operation: (f) → (dest) Status Affected: Z Status Affected: Z Encoding: 00 0001 0000 0011 Encoding: 00 1001 dfff ffff Description: W register is cleared. Zero bit Description: The contents of register ‘f’ are (Z) is set. complemented. If ‘d’ is ‘0’, the result is stored in W. If ‘d’ is ‘1’, Words: 1 the result is stored back in Cycles: 1 register ‘f’. Example CLRW Words: 1 Before Instruction Cycles: 1 W = 0x5A Example COMF REG1, 0 After Instruction W = 0x00 Before Instruction Z = 1 REG1 = 0x13 After Instruction REG1 = 0x13 W = 0xEC CLRWDT Clear Watchdog Timer DECF Decrement f Syntax: [ label ] CLRWDT Syntax: [ label ] DECF f,d Operands: None Operands: 0 ≤ f ≤ 127 Operation: 00h → WDT d ∈ [0,1] 0 → WDT prescaler, Operation: (f) - 1 → (dest) 1 → TO Status Affected: Z 1 → PD Encoding: 00 0011 dfff ffff Status Affected: TO, PD Description: Decrement register ‘f’. If ‘d’ is Encoding: 00 0000 0110 0100 ‘0’. the result is stored in the W Description: CLRWDT instruction resets the register. If ‘d’ is ‘1’, the result is Watchdog Timer. It also resets stored back in register ‘f’. the prescaler of the WDT. Status Words: 1 bits TO and PD are set. Cycles: 1 Words: 1 Example DECF CNT, 1 Cycles: 1 Before Instruction Example CLRWDT CNT = 0x01 Before Instruction Z = 0 WDT counter = ? After Instruction After Instruction CNT = 0x00 WDT counter = 0x00 Z = 1 WDT prescaler = 0 TO = 1 PD = 1 DS40044G-page 122 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A DECFSZ Decrement f, Skip if 0 GOTO Unconditional Branch Syntax: [ label ] DECFSZ f,d Syntax: [ label ] GOTO k Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ k ≤ 2047 d ∈ [0,1] Operation: k → PC<10:0> Operation: (f) - 1 → (dest); skip if result = PCLATH<4:3> → PC<12:11> 0 Status Affected: None Status Affected: None Encoding: 10 1kkk kkkk kkkk Encoding: 00 1011 dfff ffff Description: GOTO is an unconditional Description: The contents of register ‘f’ are branch. The eleven-bit immedi- decremented. If ‘d’ is ‘0’, the ate value is loaded into PC bits result is placed in the W register. <10:0>. The upper bits of PC If ‘d’ is ‘1’, the result is placed are loaded from PCLATH<4:3>. back in register ‘f’. GOTO is a two-cycle instruction. If the result is ‘0’, the next instruction, which is already Words: 1 fetched, is discarded. A NOP is Cycles: 2 executed instead making it a Example GOTO THERE two-cycle instruction. After Instruction Words: 1 PC = Address THERE Cycles: 1(2) Example HERE DECFSZ REG1, 1 GOTO LOOP CONTINUE (cid:129) (cid:129) (cid:129) Before Instruction PC = address HERE After Instruction REG1 = REG1 - 1 if REG1 = 0, PC = address CONTINUE if REG1 ≠ 0, PC = address HERE+1 © 2009 Microchip Technology Inc. DS40044G-page 123

PIC16F627A/628A/648A INCF Increment f INCFSZ Increment f, Skip if 0 Syntax: [ label ] INCF f,d Syntax: [ label ] INCFSZ f,d Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] d ∈ [0,1] Operation: (f) + 1 → (dest) Operation: (f) + 1 → (dest), skip if result = 0 Status Affected: Z Status Affected: None Encoding: 00 1010 dfff ffff Encoding: 00 1111 dfff ffff Description: The contents of register ‘f’ are Description: The contents of register ‘f’ are incremented. If ‘d’ is ‘0’, the incremented. If ‘d’ is ‘0’, the result is placed in the W register. result is placed in the W register. If ‘d’ is ‘1’, the result is placed If ‘d’ is ‘1’, the result is placed back in register ‘f’. back in register ‘f’. If the result is ‘0’, the next Words: 1 instruction, which is already Cycles: 1 fetched, is discarded. A NOP is Example INCF REG1, 1 executed instead making it a two-cycle instruction. Before Instruction REG1= 0xFF Words: 1 Z = 0 Cycles: 1(2) After Instruction Example HERE INCFSZ REG1, 1 REG1= 0x00 GOTO LOOP Z = 1 CONTINUE (cid:129) (cid:129) (cid:129) Before Instruction PC = address HERE After Instruction REG1 = REG1 + 1 if CNT = 0, PC = address CONTINUE if REG1≠ 0, PC = address HERE +1 DS40044G-page 124 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A IORLW Inclusive OR Literal with W MOVLW Move Literal to W Syntax: [ label ] IORLW k Syntax: [ label ] MOVLW k Operands: 0 ≤ k ≤ 255 Operands: 0 ≤ k ≤ 255 Operation: (W) .OR. k → (W) Operation: k → (W) Status Affected: Z Status Affected: None Encoding: 11 1000 kkkk kkkk Encoding: 11 00xx kkkk kkkk Description: The contents of the W register is Description: The eight bit literal ‘k’ is loaded OR’ed with the eight-bit literal into W register. The “don’t ‘k’. The result is placed in the W cares” will assemble as ‘0’s. register. Words: 1 Words: 1 Cycles: 1 Cycles: 1 Example MOVLW 0x5A Example IORLW 0x35 After Instruction Before Instruction W = 0x5A W = 0x9A After Instruction W = 0xBF Z = 0 IORWF Inclusive OR W with f MOVF Move f Syntax: [ label ] IORWF f,d Syntax: [ label ] MOVF f,d Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] d ∈ [0,1] Operation: (W) .OR. (f) → (dest) Operation: (f) → (dest) Status Affected: Z Status Affected: Z Encoding: 00 0100 dfff ffff Encoding: 00 1000 dfff ffff Description: Inclusive OR the W register with Description: The contents of register ‘f’ is register ‘f’. If ‘d’ is ‘0’, the result moved to a destination is placed in the W register. If ‘d’ dependent upon the status of is ‘1’, the result is placed back in ‘d’. If d = 0, destination is W register ‘f’. register. If d = 1, the destination Words: 1 is file register f itself. d = 1 is useful to test a file register since Cycles: 1 status flag Z is affected. Example IORWF REG1, 0 Words: 1 Before Instruction Cycles: 1 REG1 = 0x13 W = 0x91 Example MOVF REG1, 0 After Instruction After Instruction REG1 = 0x13 W= value in REG1 register W = 0x93 Z = 1 Z = 1 © 2009 Microchip Technology Inc. DS40044G-page 125

PIC16F627A/628A/648A MOVWF Move W to f OPTION Load Option Register Syntax: [ label ] MOVWF f Syntax: [ label ] OPTION Operands: 0 ≤ f ≤ 127 Operands: None Operation: (W) → (f) Operation: (W) → OPTION Status Affected: None Status Affected: None Encoding: 00 0000 0110 0010 Encoding: 00 0000 1fff ffff Description: The contents of the W register are Description: Move data from W register to loaded in the OPTION register. register ‘f’. This instruction is supported for Words: 1 code compatibility with PIC16C5X products. Since OPTION is a Cycles: 1 readable/writable register, the Example MOVWF REG1 user can directly addressit. Using Before Instruction only register instruction such as REG1 = 0xFF MOVWF. W = 0x4F Words: 1 After Instruction Cycles: 1 REG1 = 0x4F W = 0x4F Example To maintain upward compatibil- ity with future PIC® MCU products, do not use this instruction. NOP No Operation RETFIE Return from Interrupt Syntax: [ label ] RETFIE Syntax: [ label ] NOP Operands: None Operands: None Operation: No operation Operation: TOS → PC, 1 → GIE Status Affected: None Status Affected: None Encoding: 00 0000 0xx0 0000 Encoding: 00 0000 0000 1001 Description: No operation. Description: Return from Interrupt. Stack is Words: 1 POPed and Top-of-Stack (TOS) Cycles: 1 is loaded in the PC. Interrupts are enabled by setting Global Example NOP Interrupt Enable bit, GIE (INTCON<7>). This is a two- cycle instruction. Words: 1 Cycles: 2 Example RETFIE After Interrupt PC = TOS GIE = 1 DS40044G-page 126 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A RETLW Return with Literal in W RLF Rotate Left f through Carry Syntax: [ label ] RETLW k Syntax: [ label ] RLF f,d Operands: 0 ≤ k ≤ 255 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] Operation: k → (W); TOS → PC Operation: See description below Status Affected: None Status Affected: C Encoding: 11 01xx kkkk kkkk Encoding: 00 1101 dfff ffff Description: The W register is loaded with Description: The contents of register ‘f’ are the eight-bit literal ‘k’. The rotated one bit to the left through program counter is loaded from the Carry Flag. If ‘d’ is ‘0’, the the top of the stack (the return result is placed in the W register. address). This is a two-cycle If ‘d’ is ‘1’, the result is stored instruction. back in register ‘f’. Words: 1 C REGISTER F Cycles: 2 Words: 1 Example CALL TABLE;W contains table ;offset value Cycles: 1 (cid:129) ;W now has table value Example RLF REG1, 0 (cid:129) (cid:129) Before Instruction TABLE ADDWF PC;W = offset REG1=1110 0110 RETLW k1;Begin table C = 0 RETLW k2; After Instruction (cid:129) REG1=1110 0110 (cid:129) W = 1100 1100 (cid:129) C = 1 RETLW kn; End of table Before Instruction W = 0x07 After Instruction W = value of k8 RETURN Return from Subroutine Syntax: [ label ] RETURN Operands: None Operation: TOS → PC Status Affected: None Encoding: 00 0000 0000 1000 Description: Return from subroutine. The stack is POPed and the top of the stack (TOS) is loaded into the program counter. This is a two-cycle instruction. Words: 1 Cycles: 2 Example RETURN After Interrupt PC = TOS © 2009 Microchip Technology Inc. DS40044G-page 127

PIC16F627A/628A/648A RRF Rotate Right f through Carry SUBLW Subtract W from Literal Syntax: [ label ] RRF f,d Syntax: [ label ] SUBLW k Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ k ≤ 255 d ∈ [0,1] Operation: k - (W) → (W) Operation: See description below Status C, DC, Z Status Affected: C Affected: Encoding: 00 1100 dfff ffff Encoding: 11 110x kkkk kkkk Description: The contents of register ‘f’ are Description: The W register is subtracted (2’s rotated one bit to the right complement method) from the eight- through the Carry Flag. If ‘d’ is bit literal ‘k’. The result is placed in ‘0’, the result is placed in the W the W register. register. If ‘d’ is ‘1’, the result is Words: 1 placed back in register ‘f’. Cycles: 1 C REGISTER F Example 1: SUBLW 0x02 Words: 1 Before Instruction Cycles: 1 W = 1 C = ? Example RRF REG1, 0 After Instruction Before Instruction REG1 = 1110 0110 W = 1 C = 0 C = 1; result is positive After Instruction Example 2: Before Instruction REG1 = 1110 0110 W = 2 W = 0111 0011 C = ? C = 0 After Instruction W = 0 SLEEP C = 1; result is zero Syntax: [ label ] SLEEP Example 3: Before Instruction Operands: None W = 3 C = ? Operation: 00h → WDT, 0 → WDT prescaler, After Instruction 1 → TO, W = 0xFF 0 → PD C = 0; result is negative Status Affected: TO, PD Encoding: 00 0000 0110 0011 Description: The power-down Status bit, PD is cleared. Time out Status bit, TO is set. Watchdog Timer and its prescaler are cleared. The processor is put into Sleep mode with the oscillator stopped. See Section14.8 “Power-Down Mode (Sleep)” for more details. Words: 1 Cycles: 1 Example: SLEEP DS40044G-page 128 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A SUBWF Subtract W from f SWAPF Swap Nibbles in f Syntax: [ label ] SUBWF f,d Syntax: [ label ] SWAPF f,d Operands: 0 ≤ f ≤ 127 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] d ∈ [0,1] Operation: (f) - (W) → (dest) Operation: (f<3:0>) → (dest<7:4>), (f<7:4>) → (dest<3:0>) Status C, DC, Z Affected: Status Affected: None Encoding: 00 0010 dfff ffff Encoding: 00 1110 dfff ffff Description: Subtract (2’s complement method) Description: The upper and lower nibbles of Wregister from register ‘f’. If ‘d’ is register ‘f’ are exchanged. If ‘d’ is ‘0’, the result is stored in the W ‘0’, the result is placed in W register. If ‘d’ is ‘1’, the result is register. If ‘d’ is ‘1’, the result is stored back in register ‘f’. placed in register ‘f’. Words: 1 Words: 1 Cycles: 1 Cycles: 1 Example 1: SUBWF REG1, 1 Example SWAPF REG1, 0 Before Instruction Before Instruction REG1 = 3 REG1 = 0xA5 W = 2 After Instruction C = ? REG1 = 0xA5 After Instruction W = 0x5A REG1 = 1 W = 2 C = 1; result is positive TRIS Load TRIS Register DC = 1 Syntax: [ label ] TRIS f Z = 0 Operands: 5 ≤ f ≤ 7 Example 2: Before Instruction Operation: (W) → TRIS register f; REG1 = 2 Status Affected: None W = 2 C = ? Encoding: 00 0000 0110 0fff Description: The instruction is supported for After Instruction code compatibility with the REG1 = 0 PIC16C5X products. Since TRIS W = 2 registers are readable and C = 1; result is zero writable, the user can directly Z = DC = 1 address them. Example 3: Before Instruction Words: 1 REG1 = 1 Cycles: 1 W = 2 Example C = ? To maintain upward compatibil- After Instruction ity with future PIC® MCU REG1 = 0xFF products, do not use this W = 2 instruction. C = 0; result is negative Z = DC = 0 © 2009 Microchip Technology Inc. DS40044G-page 129

PIC16F627A/628A/648A XORLW Exclusive OR Literal with W XORWF Exclusive OR W with f Syntax: [ label ] XORLW k Syntax: [ label ] XORWF f,d Operands: 0 ≤ k ≤ 255 Operands: 0 ≤ f ≤ 127 d ∈ [0,1] Operation: (W) .XOR. k → (W) Operation: (W) .XOR. (f) → (dest) Status Affected: Z Status Affected: Z Encoding: 11 1010 kkkk kkkk Encoding: 00 0110 dfff ffff Description: The contents of the W register are XOR’ed with the eight-bit Description: Exclusive OR the contents of the literal ‘k’. The result is placed in Wregister with register ‘f’. If ‘d’ is the Wregister. ‘0’, the result is stored in the W register. If ‘d’ is ‘1’, the result is Words: 1 stored back in register ‘f’. Cycles: 1 Words: 1 Example: XORLW 0xAF Cycles: 1 Before Instruction Example XORWF REG1, 1 W = 0xB5 Before Instruction After Instruction REG1= 0xAF W = 0x1A W = 0xB5 After Instruction REG1= 0x1A W = 0xB5 DS40044G-page 130 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 16.0 DEVELOPMENT SUPPORT 16.1 MPLAB Integrated Development Environment Software The PIC® microcontrollers and dsPIC® digital signal controllers are supported with a full range of software The MPLAB IDE software brings an ease of software and hardware development tools: development previously unseen in the 8/16/32-bit • Integrated Development Environment microcontroller market. The MPLAB IDE is a Windows® operating system-based application that contains: - MPLAB® IDE Software • Compilers/Assemblers/Linkers • A single graphical interface to all debugging tools - MPLAB C Compiler for Various Device - Simulator Families - Programmer (sold separately) - HI-TECH C for Various Device Families - In-Circuit Emulator (sold separately) - MPASMTM Assembler - In-Circuit Debugger (sold separately) - MPLINKTM Object Linker/ • A full-featured editor with color-coded context MPLIBTM Object Librarian • A multiple project manager - MPLAB Assembler/Linker/Librarian for • Customizable data windows with direct edit of Various Device Families contents • Simulators • High-level source code debugging - MPLAB SIM Software Simulator • Mouse over variable inspection • Emulators • Drag and drop variables from source to watch - MPLAB REAL ICE™ In-Circuit Emulator windows • In-Circuit Debuggers • Extensive on-line help - MPLAB ICD 3 • Integration of select third party tools, such as - PICkit™ 3 Debug Express IAR C Compilers • Device Programmers The MPLAB IDE allows you to: - PICkit™ 2 Programmer • Edit your source files (either C or assembly) - MPLAB PM3 Device Programmer • One-touch compile or assemble, and download to • Low-Cost Demonstration/Development Boards, emulator and simulator tools (automatically Evaluation Kits, and Starter Kits updates all project information) • Debug using: - Source files (C or assembly) - Mixed C and assembly - Machine code MPLAB IDE supports multiple debugging tools in a single development paradigm, from the cost-effective simulators, through low-cost in-circuit debuggers, to full-featured emulators. This eliminates the learning curve when upgrading to tools with increased flexibility and power. © 2009 Microchip Technology Inc. DS40044G-page 131

PIC16F627A/628A/648A 16.2 MPLAB C Compilers for Various 16.5 MPLINK Object Linker/ Device Families MPLIB Object Librarian The MPLAB C Compiler code development systems The MPLINK Object Linker combines relocatable are complete ANSI C compilers for Microchip’s PIC18, objects created by the MPASM Assembler and the PIC24 and PIC32 families of microcontrollers and the MPLAB C18 C Compiler. It can link relocatable objects dsPIC30 and dsPIC33 families of digital signal control- from precompiled libraries, using directives from a lers. These compilers provide powerful integration linker script. capabilities, superior code optimization and ease of The MPLIB Object Librarian manages the creation and use. modification of library files of precompiled code. When For easy source level debugging, the compilers provide a routine from a library is called from a source file, only symbol information that is optimized to the MPLAB IDE the modules that contain that routine will be linked in debugger. with the application. This allows large libraries to be used efficiently in many different applications. 16.3 HI-TECH C for Various Device The object linker/library features include: Families • Efficient linking of single libraries instead of many The HI-TECH C Compiler code development systems smaller files are complete ANSI C compilers for Microchip’s PIC • Enhanced code maintainability by grouping family of microcontrollers and the dsPIC family of digital related modules together signal controllers. These compilers provide powerful • Flexible creation of libraries with easy module integration capabilities, omniscient code generation listing, replacement, deletion and extraction and ease of use. For easy source level debugging, the compilers provide 16.6 MPLAB Assembler, Linker and symbol information that is optimized to the MPLAB IDE Librarian for Various Device debugger. Families The compilers include a macro assembler, linker, pre- MPLAB Assembler produces relocatable machine processor, and one-step driver, and can run on multiple code from symbolic assembly language for PIC24, platforms. PIC32 and dsPIC devices. MPLAB C Compiler uses the assembler to produce its object file. The assembler 16.4 MPASM Assembler generates relocatable object files that can then be The MPASM Assembler is a full-featured, universal archived or linked with other relocatable object files and macro assembler for PIC10/12/16/18 MCUs. archives to create an executable file. Notable features of the assembler include: The MPASM Assembler generates relocatable object files for the MPLINK Object Linker, Intel® standard HEX • Support for the entire device instruction set files, MAP files to detail memory usage and symbol • Support for fixed-point and floating-point data reference, absolute LST files that contain source lines • Command line interface and generated machine code and COFF files for • Rich directive set debugging. • Flexible macro language The MPASM Assembler features include: • MPLAB IDE compatibility • Integration into MPLAB IDE projects • User-defined macros to streamline assembly code • Conditional assembly for multi-purpose source files • Directives that allow complete control over the assembly process DS40044G-page 132 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 16.7 MPLAB SIM Software Simulator 16.9 MPLAB ICD 3 In-Circuit Debugger System The MPLAB SIM Software Simulator allows code development in a PC-hosted environment by simulat- MPLAB ICD 3 In-Circuit Debugger System is Micro- ing the PIC MCUs and dsPIC® DSCs on an instruction chip's most cost effective high-speed hardware level. On any given instruction, the data areas can be debugger/programmer for Microchip Flash Digital Sig- examined or modified and stimuli can be applied from nal Controller (DSC) and microcontroller (MCU) a comprehensive stimulus controller. Registers can be devices. It debugs and programs PIC® Flash microcon- logged to files for further run-time analysis. The trace trollers and dsPIC® DSCs with the powerful, yet easy- buffer and logic analyzer display extend the power of to-use graphical user interface of MPLAB Integrated the simulator to record and track program execution, Development Environment (IDE). actions on I/O, most peripherals and internal registers. The MPLAB ICD 3 In-Circuit Debugger probe is con- The MPLAB SIM Software Simulator fully supports nected to the design engineer's PC using a high-speed symbolic debugging using the MPLAB CCompilers, USB 2.0 interface and is connected to the target with a and the MPASM and MPLAB Assemblers. The soft- connector compatible with the MPLAB ICD 2 or MPLAB ware simulator offers the flexibility to develop and REAL ICE systems (RJ-11). MPLAB ICD 3 supports all debug code outside of the hardware laboratory envi- MPLAB ICD 2 headers. ronment, making it an excellent, economical software development tool. 16.10 PICkit 3 In-Circuit Debugger/ Programmer and 16.8 MPLAB REAL ICE In-Circuit PICkit 3 Debug Express Emulator System The MPLAB PICkit 3 allows debugging and program- MPLAB REAL ICE In-Circuit Emulator System is ming of PIC® and dsPIC® Flash microcontrollers at a Microchip’s next generation high-speed emulator for most affordable price point using the powerful graphical Microchip Flash DSC and MCU devices. It debugs and user interface of the MPLAB Integrated Development programs PIC® Flash MCUs and dsPIC® Flash DSCs Environment (IDE). The MPLAB PICkit 3 is connected with the easy-to-use, powerful graphical user interface of to the design engineer's PC using a full speed USB the MPLAB Integrated Development Environment (IDE), interface and can be connected to the target via an included with each kit. Microchip debug (RJ-11) connector (compatible with The emulator is connected to the design engineer’s PC MPLAB ICD 3 and MPLAB REAL ICE). The connector using a high-speed USB 2.0 interface and is connected uses two device I/O pins and the reset line to imple- to the target with either a connector compatible with in- ment in-circuit debugging and In-Circuit Serial Pro- circuit debugger systems (RJ11) or with the new high- gramming™. speed, noise tolerant, Low-Voltage Differential Signal The PICkit 3 Debug Express include the PICkit 3, demo (LVDS) interconnection (CAT5). board and microcontroller, hookup cables and CDROM The emulator is field upgradable through future firmware with user’s guide, lessons, tutorial, compiler and downloads in MPLAB IDE. In upcoming releases of MPLAB IDE software. MPLAB IDE, new devices will be supported, and new features will be added. MPLAB REAL ICE offers signifi- cant advantages over competitive emulators including low-cost, full-speed emulation, run-time variable watches, trace analysis, complex breakpoints, a rugge- dized probe interface and long (up to three meters) inter- connection cables. © 2009 Microchip Technology Inc. DS40044G-page 133

PIC16F627A/628A/648A 16.11 PICkit 2 Development 16.13 Demonstration/Development Programmer/Debugger and Boards, Evaluation Kits, and PICkit 2 Debug Express Starter Kits The PICkit™ 2 Development Programmer/Debugger is A wide variety of demonstration, development and a low-cost development tool with an easy to use inter- evaluation boards for various PIC MCUs and dsPIC face for programming and debugging Microchip’s Flash DSCs allows quick application development on fully func- families of microcontrollers. The full featured tional systems. Most boards include prototyping areas for Windows® programming interface supports baseline adding custom circuitry and provide application firmware (PIC10F, PIC12F5xx, PIC16F5xx), midrange and source code for examination and modification. (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, The boards support a variety of features, including LEDs, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit temperature sensors, switches, speakers, RS-232 microcontrollers, and many Microchip Serial EEPROM interfaces, LCD displays, potentiometers and additional products. With Microchip’s powerful MPLAB Integrated EEPROM memory. Development Environment (IDE) the PICkit™ 2 enables in-circuit debugging on most PIC® microcon- The demonstration and development boards can be trollers. In-Circuit-Debugging runs, halts and single used in teaching environments, for prototyping custom steps the program while the PIC microcontroller is circuits and for learning about various microcontroller embedded in the application. When halted at a break- applications. point, the file registers can be examined and modified. In addition to the PICDEM™ and dsPICDEM™ demon- The PICkit 2 Debug Express include the PICkit 2, demo stration/development board series of circuits, Microchip board and microcontroller, hookup cables and CDROM has a line of evaluation kits and demonstration software with user’s guide, lessons, tutorial, compiler and for analog filter design, KEELOQ® security ICs, CAN, IrDA®, PowerSmart battery management, SEEVAL® MPLAB IDE software. evaluation system, Sigma-Delta ADC, flow rate sensing, plus many more. 16.12 MPLAB PM3 Device Programmer Also available are starter kits that contain everything The MPLAB PM3 Device Programmer is a universal, needed to experience the specified device. This usually CE compliant device programmer with programmable includes a single application and debug capability, all voltage verification at VDDMIN and VDDMAX for on one board. maximum reliability. It features a large LCD display Check the Microchip web page (www.microchip.com) (128 x 64) for menus and error messages and a modu- for the complete list of demonstration, development lar, detachable socket assembly to support various and evaluation kits. package types. The ICSP™ cable assembly is included as a standard item. In Stand-Alone mode, the MPLAB PM3 Device Programmer can read, verify and program PIC devices without a PC connection. It can also set code protection in this mode. The MPLAB PM3 connects to the host PC via an RS-232 or USB cable. The MPLAB PM3 has high-speed communications and optimized algorithms for quick programming of large memory devices and incorporates an MMC card for file storage and data applications. DS40044G-page 134 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 17.0 ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings(†) Ambient temperature under bias.................................................................................................................-40 to +125°C Storage temperature.............................................................................................................................. -65°C to +150°C Voltage on VDD with respect to VSS ............................................................................................................ -0.3 to +6.5V Voltage on MCLR and RA4 with respect to VSS ............................................................................................-0.3 to +14V Voltage on all other pins with respect to VSS ....................................................................................-0.3V to VDD + 0.3V Total power dissipation(1).....................................................................................................................................800 mW Maximum current out of VSS pin...........................................................................................................................300 mA Maximum current into VDD pin..............................................................................................................................250 mA Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA Output clamp current, IOK (Vo < 0 or Vo >VDD)...............................................................................................................± 20 mA Maximum output current sunk by any I/O pin..........................................................................................................25 mA Maximum output current sourced by any I/O pin....................................................................................................25 mA Maximum current sunk by PORTA and PORTB (Combined)................................................................................200 mA Maximum current sourced by PORTA and PORTB (Combined)...........................................................................200 mA Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD – ∑ IOH} + ∑ {(VDD – VOH) x IOH} + ∑(VOl x IOL) † NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. Note: Voltage spikes below VSS at the MCLR pin, inducing currents greater than 80 mA, may cause latch-up. Thus, a series resistor of 50-100Ω should be used when applying a “low” level to the MCLR pin rather than pulling this pin directly to VSS. © 2009 Microchip Technology Inc. DS40044G-page 135

PIC16F627A/628A/648A FIGURE 17-1: PIC16F627A/628A/648A VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ +125°C 6.0 5.5 5.0 4.5 VDD (VOLTS) 4.0 3.5 3.0 2.5 0 4 10 20 25 FREQUENCY (MHz) Note: The shaded region indicates the permissible combinations of voltage and frequency. FIGURE 17-2: PIC16LF627A/628A/648A VOLTAGE-FREQUENCY GRAPH, -40°C ≤ TA ≤ +85°C 6.0 5.5 5.0 4.5 VDD (VOLTS) 4.0 3.5 3.0 2.5 2.0 0 4 10 20 25 FREQUENCY (MHz) Note: The shaded region indicates the permissible combinations of voltage and frequency. DS40044G-page 136 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 17.1 DC Characteristics:PIC16F627A/628A/648A (Industrial, Extended) PIC16LF627A/628A/648A (Industrial) PIC16LF627A/628A/648A Standard Operating Conditions (unless otherwise stated) (Industrial) Operating temperature -40°C ≤ Ta ≤ +85°C for industrial Standard Operating Conditions (unless otherwise stated) PIC16F627A/628A/648A Operating temperature -40°C ≤ Ta ≤ +85°C for industrial and (Industrial, Extended) -40°C ≤ Ta ≤ +125°C for extended Param Sym Characteristic/Device Min Typ† Max Units Conditions No. VDD Supply Voltage D001 PIC16LF627A/628A/648A 2.0 — 5.5 V PIC16F627A/628A/648A 3.0 — 5.5 V D002 VDR RAM Data Retention — 1.5* — V Device in Sleep mode Voltage(1) D003 VPOR VDD Start Voltage — VSS — V See Section14.4 “Power- to ensure Power-on Reset on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST) and Brown-out Reset (BOR)”on Power-on Reset for details D004 SVDD VDD Rise Rate 0.05* — — V/ms See Section14.4 “Power- to ensure Power-on Reset on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST) and Brown-out Reset (BOR)” on Power-on Reset for details D005 VBOR Brown-out Reset Voltage 3.65 4.0 4.35 V BOREN configuration bit is set 3.65 4.0 4.4 V BOREN configuration bit is set, Extended Legend: Rows with standard voltage device data only are shaded for improved readability. * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C, unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data. © 2009 Microchip Technology Inc. DS40044G-page 137

PIC16F627A/628A/648A 17.2 DC Characteristics: PIC16F627A/628A/648A (Industrial) PIC16LF627A/628A/648A (Industrial) Standard Operating Conditions (unless otherwise stated) DC CHARACTERISTICS Operating temperature -40°C ≤ Ta ≤ +85°C for industrial Conditions Param LF and F Device Min† Typ Max Units No. Characteristics VDD Note Supply Voltage (VDD) LF 2.0 — 5.5 V — D001 LF/F 3.0 — 5.5 V — Power-down Base Current (IPD) LF — 0.01 0.80 μA 2.0 WDT, BOR, Comparators, VREF and D020 LF/F — 0.01 0.85 μA 3.0 T1OSC: disabled — 0.02 2.7 μA 5.0 Peripheral Module Current (ΔIMOD)(1) LF — 1 2.0 μA 2.0 WDT Current D021 LF/F — 2 3.4 μA 3.0 — 9 17.0 μA 5.0 LF/F — 29 52 μA 4.5 BOR Current D022 — 30 55 μA 5.0 LF — 15 22 μA 2.0 Comparator Current D023 LF/F — 22 37 μA 3.0 (Both comparators enabled) — 44 68 μA 5.0 LF — 34 55 μA 2.0 VREF Current D024 LF/F — 50 75 μA 3.0 — 80 110 μA 5.0 LF — 1.2 2.0 μA 2.0 T1OSC Current D025 LF/F — 1.3 2.2 μA 3.0 — 1.8 2.9 μA 5.0 Supply Current (IDD) LF — 10 15 μA 2.0 FOSC = 32kHz D010 LF/F — 15 25 μA 3.0 LP Oscillator Mode — 28 48 μA 5.0 LF — 125 190 μA 2.0 FOSC = 1MHz D011 LF/F — 175 340 μA 3.0 XT Oscillator Mode — 320 520 μA 5.0 LF — 250 350 μA 2.0 FOSC = 4MHz D012 LF/F — 450 600 μA 3.0 XT Oscillator Mode — 710 995 μA 5.0 LF — 395 465 μA 2.0 FOSC = 4MHz D012A LF/F — 565 785 μA 3.0 INTOSC — 0.895 1.3 mA 5.0 LF/F — 2.5 2.9 mA 4.5 FOSC = 20MHz D013 — 2.75 3.3 mA 5.0 HS Oscillator Mode Note 1: The “Δ” current is the additional current consumed when this peripheral is enabled. This current should be added to the base IDD or IPD measurement. Max values should be used when calculating total current consumption. DS40044G-page 138 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 17.3 DC Characteristics: PIC16F627A/628A/648A (Extended) Standard Operating Conditions (unless otherwise stated) DC CHARACTERISTICS Operating temperature -40°C ≤ Ta ≤ +125°C for extended Conditions Param Device Characteristics Min† Typ Max Units No. VDD Note Supply Voltage (VDD) D001 — 3.0 — 5.5 V — Power-down Base Current (IPD) — — 0.01 4 μA 3.0 WDT, BOR, Comparators, VREF and D020E — 0.02 8 μA 5.0 T1OSC: disabled Peripheral Module Current (ΔIMOD)(1) — — 2 9 μA 3.0 WDT Current D021E — 9 20 μA 5.0 — — 29 52 μA 4.5 BOR Current D022E — 30 55 μA 5.0 — — 22 37 μA 3.0 Comparator Current D023E — 44 68 μA 5.0 (Both comparators enabled) — — 50 75 μA 3.0 VREF Current D024E — 83 110 μA 5.0 — — 1.3 4 μA 3.0 T1OSC Current D025E — 1.8 6 μA 5.0 Supply Current (IDD) — — 15 28 μA 3.0 FOSC = 32kHz D010E — 28 54 μA 5.0 LP Oscillator Mode — — 175 340 μA 3.0 FOSC = 1MHz D011E — 320 520 μA 5.0 XT Oscillator Mode — — 450 650 μA 3.0 FOSC = 4MHz D012E — 0.710 1.1 mA 5.0 XT Oscillator Mode — — 565 785 μA 3.0 FOSC = 4MHz D012AE — 0.895 1.3 mA 5.0 INTOSC — — 2.5 2.9 mA 4.5 FOSC = 20MHz D013E — 2.75 3.5 mA 5.0 HS Oscillator Mode Note 1: The “Δ” current is the additional current consumed when this peripheral is enabled. This current should be added to the base IDD or IPD measurement. Max values should be used when calculating total current consumption. © 2009 Microchip Technology Inc. DS40044G-page 139

PIC16F627A/628A/648A 17.4 DC Characteristics: PIC16F627A/628A/648A (Industrial, Extended) PIC16LF627A/628A/648A (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for industrial and DC CHARACTERISTICS -40°C ≤ TA ≤ +125°C for extended Operating voltage VDD range as described in DC specification Table17-2 and Table17-3 Param. Sym Characteristic/Device Min Typ† Max Unit Conditions No. VIL Input Low Voltage I/O ports D030 with TTL buffer VSS — 0.8 V VDD = 4.5V to 5.5V VSS — 0.15VDD V otherwise D031 with Schmitt Trigger input(4) VSS — 0.2VDD V D032 MCLR, RA4/T0CKI,OSC1 VSS — 0.2VDD V (Note1) (in RC mode) D033 OSC1 (in HS) VSS — 0.3VDD V OSC1 (in LP and XT) VSS — 0.6 V VIH Input High Voltage I/O ports D040 with TTL buffer 2.0V — VDD V VDD = 4.5V to 5.5V .25VDD + 0.8V — VDD V otherwise D041 with Schmitt Trigger input(4) 0.8VDD — VDD V D042 MCLR RA4/T0CKI 0.8VDD — VDD V D043 OSC1 (XT and LP) 1.3 — VDD V D043A OSC1 (in RC mode) 0.9VDD — VDD V (Note1) D043B OSC1 (in HS mode) 0.7VDD VDD V D070 IPURB PORTB weak pull-up 50 200 400 μA VDD = 5.0V, VPIN = VSS current IIL Input Leakage Current(2), (3) I/O ports (Except PORTA) — — ±1.0 μA VSS ≤ VPIN ≤ VDD, pin at high-impedance D060 PORTA(4) — — ±0.5 μA VSS ≤ VPIN ≤ VDD, pin at high-impedance D061 RA4/T0CKI — — ±1.0 μA VSS ≤ VPIN ≤ VDD D063 OSC1, MCLR — — ±5.0 μA VSS ≤ VPIN ≤ VDD, XT, HS and LP oscillator configuration VOL Output Low Voltage D080 — — 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C I/O ports(4) — — 0.6 V IOL = 7.0 mA, VDD = 4.5V, +85° to +125°C VOH Output High Voltage(3) D090 I/O ports (Except RA4(4) ) VDD – 0.7 — — V IOH = -3.0 mA, VDD = 4.5V, -40° to +85°C VDD – 0.7 — — V IOH = -2.5 mA, VDD = 4.5V, +85° to +125°C D150 VOD Open-Drain High Voltage — — 8.5* V RA4 pin PIC16F627A/628A/648A, PIC16LF627A/628A/648A Capacitive Loading Specs on Output Pins D100* COSC2 OSC2 pin — — 15 pF In XT, HS and LP modes when external clock used to drive OSC1. D101* CIO All I/O pins/OSC2 (in RC mode) — — 50 pF * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the PIC16F627A/628A/648A be driven with external clock in RC mode. 2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. 3: Negative current is defined as coming out of the pin. 4: Includes OSC1 and OSC2 when configured as I/O pins, CLKIN or CLKOUT. DS40044G-page 140 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 17-1: DC Characteristics: PIC16F627A/628A/648A (Industrial, Extended) PIC16LF627A/628A/648A (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for industrial and DC CHARACTERISTICS -40°C ≤ TA ≤ +125°C for extended Operating voltage VDD range as described in DC specification Table17-2 and Table17-3 Parameter Sym Characteristic Min Typ† Max Units Conditions No. Data EEPROM Memory D120 ED Endurance 100K 1M — E/W -40°C ≤ TA ≤ 85°C D120A ED Endurance 10K 100K E/W 85°C ≤ TA ≤ 125°C D121 VDRW VDD for read/write VMIN — 5.5 V VMIN = Minimum operating voltage D122 TDEW Erase/Write cycle time — 4 8* ms D123 TRETD Characteristic Retention 40 — — Year Provided no other specifications are violated D124 TREF Number of Total Erase/Write 1M 10M — E/W -40°C to +85°C Cycles before Refresh(1) Program Flash Memory D130 EP Endurance 10K 100K — E/W -40°C ≤ TA ≤ 85°C D130A EP Endurance 1000 10K — E/W 85°C ≤ TA ≤ 125°C D131 VPR VDD for read VMIN — 5.5 V VMIN = Minimum operating voltage D132 VIE VDD for Block erase 4.5 — 5.5 V D132A VPEW VDD for write VMIN — 5.5 V VMIN = Minimum operating voltage D133 TIE Block Erase cycle time — 4 8* ms VDD > 4.5V D133A TPEW Write cycle time — 2 4* ms D134 TRETP Characteristic Retention 40 — — year Provided no other specifications are violated * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: Refer to Section13.7 “Using the Data EEPROM” for a more detailed discussion on data EEPROM endurance. © 2009 Microchip Technology Inc. DS40044G-page 141

PIC16F627A/628A/648A TABLE 17-2: COMPARATOR SPECIFICATIONS Operating Conditions: 2.0V < VDD <5.5V, -40°C < TA < +125°C, unless otherwise stated. Param Characteristics Sym Min Typ Max Units Comments No. D300 Input Offset Voltage VIOFF — ±5.0 ±10 mV D301 Input Common Mode Voltage VICM 0 — VDD – 1.5* V D302 Common Mode Rejection Ratio CMRR 55* — — db D303 Response Time(1) TRESP — 300 400* ns VDD = 3.0V to 5.5V -40° to +85°C — 400 600* ns VDD = 3.0V to 5.5V -85° to +125°C — 400 600* ns VDD = 2.0V to 3.0V -40° to +85°C D304 Comparator Mode Change to TMC2OV — 300 10* μs Output Valid * These parameters are characterized but not tested. Note 1: Response time measured with one comparator input at (VDD – 1.5)/2, while the other input transitions from VSS to VDD. TABLE 17-3: VOLTAGE REFERENCE SPECIFICATIONS Operating Conditions: 2.0V < VDD < 5.5V, -40°C < TA < +125°C, unless otherwise stated. Spec Characteristics Sym Min Typ Max Units Comments No. D310 Resolution VRES — — VDD/24 LSb Low Range (VRR = 1) VDD/32 LSb High Range (VRR = 0) D311 Absolute Accuracy VRAA — — 1/4(2)* LSb Low Range (VRR = 1) — — 1/2(2)* LSb High Range (VRR = 0) D312 Unit Resistor Value (R) VRUR — 2k* — Ω D313 Settling Time(1) TSET — — 10* μs * These parameters are characterized but not tested. Note 1: Settling time measured while VRR = 1 and VR<3:0> transitions from ‘0000’ to ‘1111’. 2: When VDD is between 2.0V and 3.0V, the VREF output voltage levels on RA2 described by the equation:[VDD/2 ± (3 – VDD)/2] may cause the Absolute Accuracy (VRAA) of the VREF output signal on RA2 to be greater than the stated max. DS40044G-page 142 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 17.5 Timing Parameter Symbology The timing parameter symbols have been created with one of the following formats: 1. TppS2ppS 2. TppS T F Frequency T Time Lowercase subscripts (pp) and their meanings: pp ck CLKOUT osc OSC1 io I/O port t0 T0CKI mc MCLR Uppercase letters and their meanings: S F Fall P Period H High R Rise I Invalid (High-impedance) V Valid L Low Z High-Impedance FIGURE 17-3: LOAD CONDITIONS Load Condition 1 Load Condition 2 VDD/2 RL CL CL Pin Pin VSS VSS RL = 464Ω CL = 50 pF for all pins except OSC2 15 pF for OSC2 output © 2009 Microchip Technology Inc. DS40044G-page 143

PIC16F627A/628A/648A 17.6 Timing Diagrams and Specifications FIGURE 17-4: EXTERNAL CLOCK TIMING Q4 Q1 Q2 Q3 Q4 Q1 OSC1 1 3 3 4 4 2 CLKOUT TABLE 17-4: EXTERNAL CLOCK TIMING REQUIREMENTS Parameter Sym Characteristic Min Typ† Max Units Conditions No. FOSC External CLKIN Frequency(1) DC — 4 MHz XT and RC Osc mode, VDD = 5.0V DC — 20 MHz HS, EC Osc mode DC — 200 kHz LP Osc mode Oscillator Frequency(1) — — 4 MHz RC Osc mode, VDD = 5.0V 0.1 — 4 MHz XT Osc mode 1 — 20 MHz HS Osc mode — — 200 kHz LP Osc mode — 4 — MHz INTOSC mode (fast) — 48 — kHz INTOSC mode (slow) 1 TOSC External CLKIN Period(1) 250 — — ns XT and RC Osc mode 50 — — ns HS, EC Osc mode 5 — — μs LP Osc mode Oscillator Period(1) 250 — — ns RC Osc mode 250 — 10,000 ns XT Osc mode 50 — 1,000 ns HS Osc mode 5 — — μs LP Osc mode — 250 — ns INTOSC mode (fast) — 21 — μs INTOSC mode (slow) 2 TCY Instruction Cycle Time 200 TCY DC ns TCY = 4/FOSC 3 TosL, External CLKIN (OSC1) High 100* — — ns XT oscillator, TOSC L/H duty TosH External CLKIN Low cycle 4 RC External Biased RC 10kHz* — 4MHz — VDD = 5.0V Frequency * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: Instruction cycle period (TCY) equals four times the input oscillator time-based period. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator oper- ation and/or higher than expected current consumption. All devices are tested to operate at “Min” values with an external clock applied to the OSC1 pin. When an external clock input is used, the “Max” cycle time limit is “DC” (no clock) for all devices. DS40044G-page 144 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A TABLE 17-5: PRECISION INTERNAL OSCILLATOR PARAMETERS Parameter Sym Characteristic Min Typ Max Units Conditions No. F10 FIOSC Oscillator Center frequency — 4 — MHz F13 ΔIOSC Oscillator Accuracy 3.96 4 4.04 MHz VDD = 3.5 V, 25°C 3.92 4 4.08 MHz 2.0V ≤ VDD ≤ 5.5V 0°C ≤ TA ≤ +85°C 3.80 4 4.20 MHz 2.0V ≤ VDD ≤ 5.5V -40°C ≤ TA ≤ +85°C (IND) -40°C ≤ TA ≤ +125°C (EXT) F14* TIOSCST Oscillator Wake-up from Sleep — 6 8 μs VDD = 2.0V, -40°C to +85°C start-up time — 4 6 μs VDD = 3.0V, -40°C to +85°C — 3 5 μs VDD = 5.0V, -40°C to +85°C Legend: TBD = To Be Determined. * Characterized but not tested. FIGURE 17-5: CLKOUT AND I/O TIMING Q4 Q1 Q2 Q3 OSC1 11 10 22 CLKOUT 23 13 12 19 18 14 16 I/O Pin (input) 17 15 I/O Pin Old Value New Value (output) 20, 21 © 2009 Microchip Technology Inc. DS40044G-page 145

PIC16F627A/628A/648A TABLE 17-6: CLKOUT AND I/O TIMING REQUIREMENTS Parameter Sym Characteristic Min Typ† Max Units No. 10 TOSH2CKL OSC1↑ to CLKOUT↓ PIC16F62XA — 75 200* ns 10A PIC16LF62XA — — 400* ns 11 TOSH2CKH OSC1↑ to CLKOUT↑ PIC16F62XA — 75 200* ns 11A PIC16LF62XA — — 400* ns 12 TCKR CLKOUT rise time PIC16F62XA — 35 100* ns 12A PIC16LF62XA — — 200* ns 13 TCKF CLKOUT fall time PIC16F62XA — 35 100* ns 13A PIC16LF62XA — — 200* ns 14 TCKL2IOV CLKOUT ↓ to Port out valid — — 20* ns 15 TIOV2CKH Port in valid before CLKOUT ↑ PIC16F62XA TOSC+200 ns* — — ns PIC16LF62XA TOSC+400 ns* — — ns 16 TCKH2IOI Port in hold after CLKOUT ↑ 0 — — ns 17 TOSH2IOV OSC1↑ (Q1 cycle) to PIC16F62XA — 50 150* ns Port out valid PIC16LF62XA — — 300* ns 18 TOSH2IOI OSC1↑ (Q2 cycle) to Port input invalid 100* — — ns (I/O in hold time) 200* * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. FIGURE 17-6: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP TIMER TIMING VDD MCLR 30 Internal POR 33 PWRT Time out 32 OST Time out Internal Reset Watchdog Timer Reset 31 34 34 I/O Pins DS40044G-page 146 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 17-7: BROWN-OUT RESET TIMING VDD VBOR 35 TABLE 17-7: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP TIMER REQUIREMENTS Parameter Sym Characteristic Min Typ† Max Units Conditions No. 30 TMCL MCLR Pulse Width (low) 2000 — — ns VDD = 5V, -40°C to +85°C 31 TWDT Watchdog Timer Time out Period 7* 18 33* ms VDD = 5V, -40°C to +85°C (No Prescaler) 32 TOST Oscillation Start-up Timer Period — 1024 TOSC — — TOSC = OSC1 period 33 TPWRT Power-up Timer Period 28* 72 132* ms VDD = 5V, -40°C to +85°C 34 TIOZ I/O High-impedance from MCLR — — 2.0* μs Low or Watchdog Timer Reset 35 TBOR Brown-out Reset pulse width 100* — — μs VDD ≤ VBOR (D005) Legend: TBD = To Be Determined. * These parameters are characterized but not tested. † Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. FIGURE 17-8: TIMER0 AND TIMER1 EXTERNAL CLOCK TIMINGS RA4/T0CKI/CMP2 40 41 42 RB6/T1OSO/T1CKI/PGC 45 46 47 48 TMR0 OR TMR1 © 2009 Microchip Technology Inc. DS40044G-page 147

PIC16F627A/628A/648A TABLE 17-8: TIMER0 AND TIMER1 EXTERNAL CLOCK REQUIREMENTS Param Sym Characteristic Min Typ† Max UnitsConditions No. 40 TT0H T0CKI High Pulse Width No Prescaler 0.5TCY + 20* — — ns With Prescaler 10* — — ns 41 TT0L T0CKI Low Pulse Width No Prescaler 0.5TCY + 20* — — ns With Prescaler 10* — — ns 42 TT0P T0CKI Period Greater of: — — ns N = prescale 20 or TCY + 40* value (2, 4, N ..., 256) 45 TT1H T1CKI High Synchronous, No Prescaler 0.5TCY + 20* — — ns Time Synchronous, PIC16F62XA 15* — — ns with PrescalerPIC16LF62XA 25* — — ns AsynchronousPIC16F62XA 30* — — ns PIC16LF62XA 50* — — ns 46 TT1L T1CKI Low Synchronous, No Prescaler 0.5TCY + 20* — — ns Time Synchronous, PIC16F62XA 15* — — ns with Prescaler PIC16LF62XA 25* — — ns AsynchronousPIC16F62XA 30* — — ns PIC16LF62XA 50* — — ns 47 TT1P T1CKI input Synchronous PIC16F62XA Greater of: — — ns N = prescale period 20 or TCY + 40* value (1, 2, N 4, 8) PIC16LF62XA Greater of: — — — 20 or TCY + 40* N AsynchronousPIC16F62XA 60* — — ns PIC16LF62XA 100* — — ns FT1 Timer1 oscillator input frequency range — 32.7(1) — kHz (oscillator enabled by setting bit T1OSCEN) 48 TCKEZTMR1Delay from external clock edge to timer 2TOSC — 7TOSC — increment * These parameters are characterized but not tested. † Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: This oscillator is intended to work only with 32.768kHz watch crystals and their manufactured tolerances. Higher value crystal frequencies may not be compatible with this crystal driver. DS40044G-page 148 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 17-9: CAPTURE/COMPARE/PWM TIMINGS RB3/CCP1 (CAPTURE MODE) 50 51 52 RB3/CCP1 (COMPARE OR PWM MODE) 53 54 TABLE 17-9: CAPTURE/COMPARE/PWM REQUIREMENTS Param Sym Characteristic Min Typ† Max Units Conditions No. 50 TCCL CCP No Prescaler 0.5TCY + — — ns input low time 20* PIC16F62XA 10* — — ns With Prescaler PIC16LF62XA 20* — — ns 51 TCCH CCP No Prescaler 0.5TCY + — — ns input high time 20* PIC16F62XA 10* — — ns With Prescaler PIC16LF62XA 20* — — ns 52 TCCP CCP input period 3TCY + 40* — — ns N = prescale N value (1,4 or 16) 53 TCCR CCP output rise time PIC16F62XA 10 25* ns PIC16LF62XA 25 45* ns 54 TCCF CCP output fall time PIC16F62XA 10 25* ns PIC16LF62XA 25 45* ns * These parameters are characterized but not tested. † Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. © 2009 Microchip Technology Inc. DS40044G-page 149

PIC16F627A/628A/648A NOTES: DS40044G-page 150 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 18.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES The graphs and tables provided in this section are for design guidance and are not tested. In some graphs or tables, the data presented are outside specified operating range (i.e., outside specified VDD range). This is for information only and devices are ensured to operate properly only within the specified range. The data presented in this section is a statistical summary of data collected on units from different lots over a period of time and matrix samples. ‘Typical’ represents the mean of the distribution at 25°C. ‘Max’ or ‘Min’ represents (mean+3σ) or (mean-3σ) respectively, where σ is standard deviation, over the whole temperature range. FIGURE 18-1: TYPICAL BASELINE IPD vs. VDD (-40°C TO 25°C) 160 140 120 100 ) A n ( 80 D P I 60 -40°C 0°C 40 +25°C 20 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) © 2009 Microchip Technology Inc. DS40044G-page 151

PIC16F627A/628A/648A FIGURE 18-2: TYPICAL BASELINE IPD vs. VDD (85°C) 300 280 260 240 220 ) A n ( 200 D P +85°C I 180 160 140 120 100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) FIGURE 18-3: TYPICAL BASELINE CURRENT IPD vs. VDD (125°C) 2.4 2.2 2.0 ) 1.8 A μ ( D +125°C P 1.6 I 1.4 1.2 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) DS40044G-page 152 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 18-4: TYPICAL BOR IPD vs. VDD 40 38 36 34 32 125°C A) 85°C μ ( 30 25°C D 0°C P I 28 -40°C 26 24 22 20 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 VDD (Volts) FIGURE 18-5: TYPICAL SINGLE COMPARATOR IPD vs. VDD 30 25 20 125°C ) A 85°C μ ( 15 25°C D 0°C P I -40°C 10 5 0 2 2.5 3 3.5 4 4.5 5 5.5 VDD (Volts) © 2009 Microchip Technology Inc. DS40044G-page 153

PIC16F627A/628A/648A FIGURE 18-6: TYPICAL VREF IPD vs. VDD 100 90 80 70 125°C ) A 85°C μ D ( 60 25°C P 0°C I -40°C 50 40 30 20 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) FIGURE 18-7: TYPICAL WDT IPD vs. VDD 16 14 12 10 125°C ) A 85°C μ ( 8 25°C D 0°C P I -40°C 6 4 2 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) DS40044G-page 154 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 18-8: AVERAGE IPD_TIMER1 5 4 3 -40C A) 0C u 25C (D 85C IP 125 2 1 0 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) FIGURE 18-9: TYPICAL INTERNAL OSCILLATOR FREQUENCY vs. TEMPERATURE VDD = 5 VOLTS 5.0% 4.0% 3.0% %) et ( 2.0% g ar T n 1.0% o ati br 0.0% ali C m o-1.0% e fr g an-2.0% h C -3.0% -4.0% -5.0% -40 25 85 125 Temperature (ºC) © 2009 Microchip Technology Inc. DS40044G-page 155

PIC16F627A/628A/648A FIGURE 18-10: TYPICAL INTERNAL OSCILLATOR FREQUENCY vs. TEMPERATURE VDD = 3 VOLTS 5.0% 4.0% 3.0% %) et ( 2.0% g ar T n 1.0% o ati br 0.0% ali C m o-1.0% e fr g an-2.0% h C -3.0% -4.0% -5.0% -40 25 85 125 Temperature (ºC) FIGURE 18-11: TYPICAL INTERNAL OSCILLATOR FREQUENCY vs. TEMPERATURE VDD = 2 VOLTS 5.0% 4.0% 3.0% %) et ( 2.0% g ar T n 1.0% o ati br 0.0% ali C m o-1.0% e fr g an-2.0% h C -3.0% -4.0% -5.0% -40 25 85 125 Temperature (ºC) DS40044G-page 156 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 18-12: TYPICAL INTERNAL OSCILLATOR DEVIATION vs. VDD AT 25°C – 4 MHz MODE 5.0% 4.0% 3.0% %) et ( 2.0% g ar n T 1.0% o ati br 0.0% ali C m o-1.0% e fr g n ha-2.0% C -3.0% -4.0% -5.0% 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) FIGURE 18-13: TYPICAL INTERNAL OSCILLATOR FREQUENCY vs. VDD TEMPERATURE = -40°C TO 85°C 5.0% 4.0% 3.0% %) et ( 2.0% g ar n T 1.0% o ati br 0.0% ali C m o-1.0% e fr g n a-2.0% h C -3.0% -4.0% -5.0% 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) © 2009 Microchip Technology Inc. DS40044G-page 157

PIC16F627A/628A/648A FIGURE 18-14: INTERNAL OSCILLATOR IDD vs. VDD – 4 MHz MODE 85 C 25 C Avg -40 C 1.40 1.20 1.00 0.80 A) m (D D I 0.60 0.40 0.20 0.00 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) FIGURE 18-15: TYPICAL INTERNAL OSCILLATOR FREQUENCY vs. VDD AT 25°C – SLOW MODE 60 55 z) 50 H k y ( c n e u eq 45 Fr or at cill s O 40 35 30 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) DS40044G-page 158 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 18-16: INTERNAL OSCILLATOR IDD vs. VDD – SLOW MODE 85 C 25 C Avg -40 C 180 160 140 120 ) 100 A μ ( D 80 P I 60 40 20 0 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) FIGURE 18-17: SUPPLY CURRENT (IDD vs. VDD, FOSC = 1 MHz (XT OSCILLATOR MODE) 500 450 400 350 125°C A) 85°C μ 300 ( 25°C D 0°C P I 250 -40°C 200 150 100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) © 2009 Microchip Technology Inc. DS40044G-page 159

PIC16F627A/628A/648A FIGURE 18-18: SUPPLY CURRENT (IDD vs. VDD, FOSC = 4 MHz (XT OSCILLATOR MODE) 1000 900 800 700 125°C A) 85°C (μ 600 25°C D 0°C P I -40°C 500 400 300 200 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (Volts) FIGURE 18-19: SUPPLY CURRENT (IDD) vs. VDD, FOSC = 20 MHz (HS OSCILLATOR MODE) 4.0 3.5 125°C ) A 85°C m ( 3.0 25°C D 0°C D I -40°C 2.5 2.0 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 VDD (Volts) DS40044G-page 160 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A FIGURE 18-20: TYPICAL WDT PERIOD vs. VDD (-40°C TO +125°C) WDT Time-out 50 45 40 35 -40 ) S m 30 0 e ( 25 25 m Ti 20 85 15 125 10 5 0 2 2.5 3 3.5 4 4.5 5 5.5 VDD (V) © 2009 Microchip Technology Inc. DS40044G-page 161

PIC16F627A/628A/648A NOTES: DS40044G-page 162 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A 19.0 PACKAGING INFORMATION 19.1 Package Marking Information 18-Lead PDIP Example XXXXXXXXXXXXXXXXX PIC16F627A XXXXXXXXXXXXXXXXX -I/P e3 YYWWNNN 0410017 18-Lead SOIC (.300”) Example XXXXXXXXXXXX PIC16F628A XXXXXXXXXXXX -E/SO e3 XXXXXXXXXXXX 0410017 YYWWNNN 20-Lead SSOP Example XXXXXXXXXXX PIC16F648A XXXXXXXXXXX -I/SS e3 YYWWNNN 0410017 28-Lead QFN Example XXXXXXXX 16F628A XXXXXXXX -I/ML e3 YYWWNNN 0410017 Legend: XX...X Customer-specific information Y Year code (last digit of calendar year) YY Year code (last 2 digits of calendar year) WW Week code (week of January 1 is week ‘01’) NNN Alphanumeric traceability code e3 Pb-free JEDEC designator for Matte Tin (Sn) * This package is Pb-free. The Pb-free JEDEC designator ( e 3 ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. © 2009 Microchip Technology Inc. DS40044G-page 163

PIC16F627A/628A/648A (cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:15)(cid:9)(cid:16)(cid:17)(cid:7)(cid:11)(cid:9)(cid:18)(cid:19)(cid:4)(cid:5)(cid:14)(cid:19)(cid:6)(cid:9)(cid:20)(cid:10)(cid:21)(cid:9)(cid:22)(cid:9)(cid:23)(cid:24)(cid:24)(cid:9)(cid:25)(cid:14)(cid:11)(cid:9)(cid:26)(cid:27)(cid:8)(cid:28)(cid:9)(cid:29)(cid:10)(cid:16)(cid:18)(cid:10)(cid:30) (cid:31)(cid:27)(cid:13)(cid:6) 3(cid:10)(cid:9)(cid:2)&(cid:11)(cid:14)(cid:2)’(cid:10)!&(cid:2)(cid:8)"(cid:9)(cid:9)(cid:14)(cid:15)&(cid:2)(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)#(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17)!((cid:2)(cid:12)(cid:16)(cid:14)(cid:28)!(cid:14)(cid:2)!(cid:14)(cid:14)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)(cid:28)&(cid:2) (cid:11)&&(cid:12)255***(cid:20)’(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)’5(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) (cid:2) N NOTE1 E1 1 2 3 D E A A2 L c A1 b1 b e eB 6(cid:15)(cid:7)&! (cid:19)7,8.(cid:22) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:2)9(cid:7)’(cid:7)&! (cid:6)(cid:19)7 7:(cid:6) (cid:6)(cid:25); 7"’)(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)(cid:31)(cid:7)(cid:15)! 7 (cid:30)< (cid:31)(cid:7)&(cid:8)(cid:11) (cid:14) (cid:20)(cid:30)(cid:4)(cid:4)(cid:2)1(cid:22), (cid:13)(cid:10)(cid:12)(cid:2)&(cid:10)(cid:2)(cid:22)(cid:14)(cid:28)&(cid:7)(cid:15)(cid:17)(cid:2)(cid:31)(cid:16)(cid:28)(cid:15)(cid:14) (cid:25) = = (cid:20)(cid:3)(cid:30)(cid:4) (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:25)(cid:3) (cid:20)(cid:30)(cid:30)(cid:29) (cid:20)(cid:30)-(cid:4) (cid:20)(cid:30)(cid:24)(cid:29) 1(cid:28)!(cid:14)(cid:2)&(cid:10)(cid:2)(cid:22)(cid:14)(cid:28)&(cid:7)(cid:15)(cid:17)(cid:2)(cid:31)(cid:16)(cid:28)(cid:15)(cid:14) (cid:25)(cid:30) (cid:20)(cid:4)(cid:30)(cid:29) = = (cid:22)(cid:11)(cid:10)"(cid:16)#(cid:14)(cid:9)(cid:2)&(cid:10)(cid:2)(cid:22)(cid:11)(cid:10)"(cid:16)#(cid:14)(cid:9)(cid:2)>(cid:7)#&(cid:11) . (cid:20)-(cid:4)(cid:4) (cid:20)-(cid:30)(cid:4) (cid:20)-(cid:3)(cid:29) (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)>(cid:7)#&(cid:11) .(cid:30) (cid:20)(cid:3)(cid:23)(cid:4) (cid:20)(cid:3)(cid:29)(cid:4) (cid:20)(cid:3)<(cid:4) : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) (cid:21) (cid:20)<<(cid:4) (cid:20)(cid:24)(cid:4)(cid:4) (cid:20)(cid:24)(cid:3)(cid:4) (cid:13)(cid:7)(cid:12)(cid:2)&(cid:10)(cid:2)(cid:22)(cid:14)(cid:28)&(cid:7)(cid:15)(cid:17)(cid:2)(cid:31)(cid:16)(cid:28)(cid:15)(cid:14) 9 (cid:20)(cid:30)(cid:30)(cid:29) (cid:20)(cid:30)-(cid:4) (cid:20)(cid:30)(cid:29)(cid:4) 9(cid:14)(cid:28)#(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:8) (cid:20)(cid:4)(cid:4)< (cid:20)(cid:4)(cid:30)(cid:4) (cid:20)(cid:4)(cid:30)(cid:23) 6(cid:12)(cid:12)(cid:14)(cid:9)(cid:2)9(cid:14)(cid:28)#(cid:2)>(cid:7)#&(cid:11) )(cid:30) (cid:20)(cid:4)(cid:23)(cid:29) (cid:20)(cid:4)?(cid:4) (cid:20)(cid:4)(cid:5)(cid:4) 9(cid:10)*(cid:14)(cid:9)(cid:2)9(cid:14)(cid:28)#(cid:2)>(cid:7)#&(cid:11) ) (cid:20)(cid:4)(cid:30)(cid:23) (cid:20)(cid:4)(cid:30)< (cid:20)(cid:4)(cid:3)(cid:3) : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)(cid:26)(cid:10)*(cid:2)(cid:22)(cid:12)(cid:28)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:2)+ (cid:14)1 = = (cid:20)(cid:23)-(cid:4) (cid:31)(cid:27)(cid:13)(cid:6)(cid:12) (cid:30)(cid:20) (cid:31)(cid:7)(cid:15)(cid:2)(cid:30)(cid:2) (cid:7)!"(cid:28)(cid:16)(cid:2)(cid:7)(cid:15)#(cid:14)$(cid:2)%(cid:14)(cid:28)&"(cid:9)(cid:14)(cid:2)’(cid:28)(cid:18)(cid:2) (cid:28)(cid:9)(cid:18)((cid:2))"&(cid:2)’"!&(cid:2))(cid:14)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)*(cid:7)&(cid:11)(cid:7)(cid:15)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:11)(cid:28)&(cid:8)(cid:11)(cid:14)#(cid:2)(cid:28)(cid:9)(cid:14)(cid:28)(cid:20) (cid:3)(cid:20) +(cid:2)(cid:22)(cid:7)(cid:17)(cid:15)(cid:7)%(cid:7)(cid:8)(cid:28)(cid:15)&(cid:2),(cid:11)(cid:28)(cid:9)(cid:28)(cid:8)&(cid:14)(cid:9)(cid:7)!&(cid:7)(cid:8)(cid:20) -(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)!(cid:2)(cid:21)(cid:2)(cid:28)(cid:15)#(cid:2).(cid:30)(cid:2)#(cid:10)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)"#(cid:14)(cid:2)’(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:20)(cid:2)(cid:6)(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:2)!(cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:14)$(cid:8)(cid:14)(cid:14)#(cid:2)(cid:20)(cid:4)(cid:30)(cid:4)/(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)!(cid:7)#(cid:14)(cid:20) (cid:23)(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)#(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6).(cid:2)0(cid:30)(cid:23)(cid:20)(cid:29)(cid:6)(cid:20) 1(cid:22),2 1(cid:28)!(cid:7)(cid:8)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)&(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)$(cid:28)(cid:8)&(cid:2) (cid:28)(cid:16)"(cid:14)(cid:2)!(cid:11)(cid:10)*(cid:15)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)!(cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17),(cid:4)(cid:23)(cid:27)(cid:4)(cid:4)(cid:5)1 DS40044G-page 164 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A (cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:15)(cid:9)!(cid:25)(cid:7)(cid:11)(cid:11)(cid:9)"(cid:17)(cid:13)(cid:11)(cid:14)(cid:19)(cid:6)(cid:9)(cid:20)!"(cid:21)(cid:9)(cid:22)(cid:9)#(cid:14)(cid:8)(cid:6)$(cid:9)%&’(cid:24)(cid:9)(cid:25)(cid:25)(cid:9)(cid:26)(cid:27)(cid:8)(cid:28)(cid:9)(cid:29)!"(cid:18)((cid:30) (cid:31)(cid:27)(cid:13)(cid:6) 3(cid:10)(cid:9)(cid:2)&(cid:11)(cid:14)(cid:2)’(cid:10)!&(cid:2)(cid:8)"(cid:9)(cid:9)(cid:14)(cid:15)&(cid:2)(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)#(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17)!((cid:2)(cid:12)(cid:16)(cid:14)(cid:28)!(cid:14)(cid:2)!(cid:14)(cid:14)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)(cid:28)&(cid:2) (cid:11)&&(cid:12)255***(cid:20)’(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)’5(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) D N E E1 NOTE1 1 2 3 e b α h h c φ A A2 β A1 L L1 6(cid:15)(cid:7)&! (cid:6)(cid:19)99(cid:19)(cid:6).(cid:13).(cid:26)(cid:22) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:2)9(cid:7)’(cid:7)&! (cid:6)(cid:19)7 7:(cid:6) (cid:6)(cid:25); 7"’)(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)(cid:31)(cid:7)(cid:15)! 7 (cid:30)< (cid:31)(cid:7)&(cid:8)(cid:11) (cid:14) (cid:30)(cid:20)(cid:3)(cid:5)(cid:2)1(cid:22), : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)8(cid:14)(cid:7)(cid:17)(cid:11)& (cid:25) = = (cid:3)(cid:20)?(cid:29) (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:25)(cid:3) (cid:3)(cid:20)(cid:4)(cid:29) = = (cid:22)&(cid:28)(cid:15)#(cid:10)%%(cid:2)(cid:2)+ (cid:25)(cid:30) (cid:4)(cid:20)(cid:30)(cid:4) = (cid:4)(cid:20)-(cid:4) : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)>(cid:7)#&(cid:11) . (cid:30)(cid:4)(cid:20)-(cid:4)(cid:2)1(cid:22), (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)>(cid:7)#&(cid:11) .(cid:30) (cid:5)(cid:20)(cid:29)(cid:4)(cid:2)1(cid:22), : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) (cid:21) (cid:30)(cid:30)(cid:20)(cid:29)(cid:29)(cid:2)1(cid:22), ,(cid:11)(cid:28)’%(cid:14)(cid:9)(cid:2)@(cid:10)(cid:12)&(cid:7)(cid:10)(cid:15)(cid:28)(cid:16)A (cid:11) (cid:4)(cid:20)(cid:3)(cid:29) = (cid:4)(cid:20)(cid:5)(cid:29) 3(cid:10)(cid:10)&(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) 9 (cid:4)(cid:20)(cid:23)(cid:4) = (cid:30)(cid:20)(cid:3)(cid:5) 3(cid:10)(cid:10)&(cid:12)(cid:9)(cid:7)(cid:15)& 9(cid:30) (cid:30)(cid:20)(cid:23)(cid:4)(cid:2)(cid:26).3 3(cid:10)(cid:10)&(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14) (cid:3) (cid:4)B = <B 9(cid:14)(cid:28)#(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:8) (cid:4)(cid:20)(cid:3)(cid:4) = (cid:4)(cid:20)-- 9(cid:14)(cid:28)#(cid:2)>(cid:7)#&(cid:11) ) (cid:4)(cid:20)-(cid:30) = (cid:4)(cid:20)(cid:29)(cid:30) (cid:6)(cid:10)(cid:16)#(cid:2)(cid:21)(cid:9)(cid:28)%&(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14)(cid:2)(cid:13)(cid:10)(cid:12) (cid:4) (cid:29)B = (cid:30)(cid:29)B (cid:6)(cid:10)(cid:16)#(cid:2)(cid:21)(cid:9)(cid:28)%&(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14)(cid:2)1(cid:10)&&(cid:10)’ (cid:5) (cid:29)B = (cid:30)(cid:29)B (cid:31)(cid:27)(cid:13)(cid:6)(cid:12) (cid:30)(cid:20) (cid:31)(cid:7)(cid:15)(cid:2)(cid:30)(cid:2) (cid:7)!"(cid:28)(cid:16)(cid:2)(cid:7)(cid:15)#(cid:14)$(cid:2)%(cid:14)(cid:28)&"(cid:9)(cid:14)(cid:2)’(cid:28)(cid:18)(cid:2) (cid:28)(cid:9)(cid:18)((cid:2))"&(cid:2)’"!&(cid:2))(cid:14)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)*(cid:7)&(cid:11)(cid:7)(cid:15)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:11)(cid:28)&(cid:8)(cid:11)(cid:14)#(cid:2)(cid:28)(cid:9)(cid:14)(cid:28)(cid:20) (cid:3)(cid:20) +(cid:2)(cid:22)(cid:7)(cid:17)(cid:15)(cid:7)%(cid:7)(cid:8)(cid:28)(cid:15)&(cid:2),(cid:11)(cid:28)(cid:9)(cid:28)(cid:8)&(cid:14)(cid:9)(cid:7)!&(cid:7)(cid:8)(cid:20) -(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)!(cid:2)(cid:21)(cid:2)(cid:28)(cid:15)#(cid:2).(cid:30)(cid:2)#(cid:10)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)"#(cid:14)(cid:2)’(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:20)(cid:2)(cid:6)(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:2)!(cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:14)$(cid:8)(cid:14)(cid:14)#(cid:2)(cid:4)(cid:20)(cid:30)(cid:29)(cid:2)’’(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)!(cid:7)#(cid:14)(cid:20) (cid:23)(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)#(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6).(cid:2)0(cid:30)(cid:23)(cid:20)(cid:29)(cid:6)(cid:20) 1(cid:22),2 1(cid:28)!(cid:7)(cid:8)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)&(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)$(cid:28)(cid:8)&(cid:2) (cid:28)(cid:16)"(cid:14)(cid:2)!(cid:11)(cid:10)*(cid:15)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)!(cid:20) (cid:26).32 (cid:26)(cid:14)%(cid:14)(cid:9)(cid:14)(cid:15)(cid:8)(cid:14)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)((cid:2)"!"(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)((cid:2)%(cid:10)(cid:9)(cid:2)(cid:7)(cid:15)%(cid:10)(cid:9)’(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:12)"(cid:9)(cid:12)(cid:10)!(cid:14)!(cid:2)(cid:10)(cid:15)(cid:16)(cid:18)(cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17),(cid:4)(cid:23)(cid:27)(cid:4)(cid:29)(cid:30)1 © 2009 Microchip Technology Inc. DS40044G-page 165

PIC16F627A/628A/648A DS40044G-page 166 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A )(cid:24)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:15)(cid:9)!*+(cid:14)(cid:19),(cid:9)!(cid:25)(cid:7)(cid:11)(cid:11)(cid:9)"(cid:17)(cid:13)(cid:11)(cid:14)(cid:19)(cid:6)(cid:9)(cid:20)!!(cid:21)(cid:9)(cid:22)(cid:9)’&(cid:23)(cid:24)(cid:9)(cid:25)(cid:25)(cid:9)(cid:26)(cid:27)(cid:8)(cid:28)(cid:9)(cid:29)!!"(cid:10)(cid:30)(cid:9) (cid:31)(cid:27)(cid:13)(cid:6) 3(cid:10)(cid:9)(cid:2)&(cid:11)(cid:14)(cid:2)’(cid:10)!&(cid:2)(cid:8)"(cid:9)(cid:9)(cid:14)(cid:15)&(cid:2)(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)#(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17)!((cid:2)(cid:12)(cid:16)(cid:14)(cid:28)!(cid:14)(cid:2)!(cid:14)(cid:14)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)(cid:28)&(cid:2) (cid:11)&&(cid:12)255***(cid:20)’(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)’5(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) D N E E1 NOTE1 1 2 e b c A A2 φ A1 L1 L 6(cid:15)(cid:7)&! (cid:6)(cid:19)99(cid:19)(cid:6).(cid:13).(cid:26)(cid:22) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:2)9(cid:7)’(cid:7)&! (cid:6)(cid:19)7 7:(cid:6) (cid:6)(cid:25); 7"’)(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)(cid:31)(cid:7)(cid:15)! 7 (cid:3)(cid:4) (cid:31)(cid:7)&(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)?(cid:29)(cid:2)1(cid:22), : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)8(cid:14)(cid:7)(cid:17)(cid:11)& (cid:25) = = (cid:3)(cid:20)(cid:4)(cid:4) (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:25)(cid:3) (cid:30)(cid:20)?(cid:29) (cid:30)(cid:20)(cid:5)(cid:29) (cid:30)(cid:20)<(cid:29) (cid:22)&(cid:28)(cid:15)#(cid:10)%%(cid:2) (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:29) = = : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)>(cid:7)#&(cid:11) . (cid:5)(cid:20)(cid:23)(cid:4) (cid:5)(cid:20)<(cid:4) <(cid:20)(cid:3)(cid:4) (cid:6)(cid:10)(cid:16)#(cid:14)#(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)>(cid:7)#&(cid:11) .(cid:30) (cid:29)(cid:20)(cid:4)(cid:4) (cid:29)(cid:20)-(cid:4) (cid:29)(cid:20)?(cid:4) : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) (cid:21) ?(cid:20)(cid:24)(cid:4) (cid:5)(cid:20)(cid:3)(cid:4) (cid:5)(cid:20)(cid:29)(cid:4) 3(cid:10)(cid:10)&(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) 9 (cid:4)(cid:20)(cid:29)(cid:29) (cid:4)(cid:20)(cid:5)(cid:29) (cid:4)(cid:20)(cid:24)(cid:29) 3(cid:10)(cid:10)&(cid:12)(cid:9)(cid:7)(cid:15)& 9(cid:30) (cid:30)(cid:20)(cid:3)(cid:29)(cid:2)(cid:26).3 9(cid:14)(cid:28)#(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:8) (cid:4)(cid:20)(cid:4)(cid:24) = (cid:4)(cid:20)(cid:3)(cid:29) 3(cid:10)(cid:10)&(cid:2)(cid:25)(cid:15)(cid:17)(cid:16)(cid:14) (cid:3) (cid:4)B (cid:23)B <B 9(cid:14)(cid:28)#(cid:2)>(cid:7)#&(cid:11) ) (cid:4)(cid:20)(cid:3)(cid:3) = (cid:4)(cid:20)-< (cid:31)(cid:27)(cid:13)(cid:6)(cid:12) (cid:30)(cid:20) (cid:31)(cid:7)(cid:15)(cid:2)(cid:30)(cid:2) (cid:7)!"(cid:28)(cid:16)(cid:2)(cid:7)(cid:15)#(cid:14)$(cid:2)%(cid:14)(cid:28)&"(cid:9)(cid:14)(cid:2)’(cid:28)(cid:18)(cid:2) (cid:28)(cid:9)(cid:18)((cid:2))"&(cid:2)’"!&(cid:2))(cid:14)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)*(cid:7)&(cid:11)(cid:7)(cid:15)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:11)(cid:28)&(cid:8)(cid:11)(cid:14)#(cid:2)(cid:28)(cid:9)(cid:14)(cid:28)(cid:20) (cid:3)(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)!(cid:2)(cid:21)(cid:2)(cid:28)(cid:15)#(cid:2).(cid:30)(cid:2)#(cid:10)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:7)(cid:15)(cid:8)(cid:16)"#(cid:14)(cid:2)’(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:20)(cid:2)(cid:6)(cid:10)(cid:16)#(cid:2)%(cid:16)(cid:28)!(cid:11)(cid:2)(cid:10)(cid:9)(cid:2)(cid:12)(cid:9)(cid:10)&(cid:9)"!(cid:7)(cid:10)(cid:15)!(cid:2)!(cid:11)(cid:28)(cid:16)(cid:16)(cid:2)(cid:15)(cid:10)&(cid:2)(cid:14)$(cid:8)(cid:14)(cid:14)#(cid:2)(cid:4)(cid:20)(cid:3)(cid:4)(cid:2)’’(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)!(cid:7)#(cid:14)(cid:20) -(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)#(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6).(cid:2)0(cid:30)(cid:23)(cid:20)(cid:29)(cid:6)(cid:20) 1(cid:22),2 1(cid:28)!(cid:7)(cid:8)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)&(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)$(cid:28)(cid:8)&(cid:2) (cid:28)(cid:16)"(cid:14)(cid:2)!(cid:11)(cid:10)*(cid:15)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)!(cid:20) (cid:26).32 (cid:26)(cid:14)%(cid:14)(cid:9)(cid:14)(cid:15)(cid:8)(cid:14)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)((cid:2)"!"(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)((cid:2)%(cid:10)(cid:9)(cid:2)(cid:7)(cid:15)%(cid:10)(cid:9)’(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:12)"(cid:9)(cid:12)(cid:10)!(cid:14)!(cid:2)(cid:10)(cid:15)(cid:16)(cid:18)(cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17),(cid:4)(cid:23)(cid:27)(cid:4)(cid:5)(cid:3)1 © 2009 Microchip Technology Inc. DS40044G-page 167

PIC16F627A/628A/648A )(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:15)(cid:9)-(cid:17)(cid:7)(cid:8)(cid:9).(cid:11)(cid:7)(cid:13)$(cid:9)(cid:31)(cid:27)(cid:9)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:7)(cid:15),(cid:7)/(cid:6)(cid:9)(cid:20)0(cid:5)(cid:21)(cid:9)(cid:22)(cid:9)121(cid:9)(cid:25)(cid:25)(cid:9)(cid:26)(cid:27)(cid:8)(cid:28)(cid:9)(cid:29)-.(cid:31)(cid:30) 3(cid:14)(cid:13)*(cid:9)(cid:24)&’’(cid:9)(cid:25)(cid:25)(cid:9)((cid:27)(cid:19)(cid:13)(cid:7)(cid:15)(cid:13)(cid:9)(cid:5)(cid:6)(cid:19)/(cid:13)* (cid:31)(cid:27)(cid:13)(cid:6) 3(cid:10)(cid:9)(cid:2)&(cid:11)(cid:14)(cid:2)’(cid:10)!&(cid:2)(cid:8)"(cid:9)(cid:9)(cid:14)(cid:15)&(cid:2)(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)#(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17)!((cid:2)(cid:12)(cid:16)(cid:14)(cid:28)!(cid:14)(cid:2)!(cid:14)(cid:14)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)(cid:28)&(cid:2) (cid:11)&&(cid:12)255***(cid:20)’(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)’5(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) D D2 EXPOSED PAD e E b E2 2 2 1 1 K N N NOTE1 L TOPVIEW BOTTOMVIEW A A3 A1 6(cid:15)(cid:7)&! (cid:6)(cid:19)99(cid:19)(cid:6).(cid:13).(cid:26)(cid:22) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:2)9(cid:7)’(cid:7)&! (cid:6)(cid:19)7 7:(cid:6) (cid:6)(cid:25); 7"’)(cid:14)(cid:9)(cid:2)(cid:10)%(cid:2)(cid:31)(cid:7)(cid:15)! 7 (cid:3)< (cid:31)(cid:7)&(cid:8)(cid:11) (cid:14) (cid:4)(cid:20)?(cid:29)(cid:2)1(cid:22), : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)8(cid:14)(cid:7)(cid:17)(cid:11)& (cid:25) (cid:4)(cid:20)<(cid:4) (cid:4)(cid:20)(cid:24)(cid:4) (cid:30)(cid:20)(cid:4)(cid:4) (cid:22)&(cid:28)(cid:15)#(cid:10)%%(cid:2) (cid:25)(cid:30) (cid:4)(cid:20)(cid:4)(cid:4) (cid:4)(cid:20)(cid:4)(cid:3) (cid:4)(cid:20)(cid:4)(cid:29) ,(cid:10)(cid:15)&(cid:28)(cid:8)&(cid:2)(cid:13)(cid:11)(cid:7)(cid:8)4(cid:15)(cid:14)!! (cid:25)- (cid:4)(cid:20)(cid:3)(cid:4)(cid:2)(cid:26).3 : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)>(cid:7)#&(cid:11) . ?(cid:20)(cid:4)(cid:4)(cid:2)1(cid:22), .$(cid:12)(cid:10)!(cid:14)#(cid:2)(cid:31)(cid:28)#(cid:2)>(cid:7)#&(cid:11) .(cid:3) -(cid:20)?(cid:29) -(cid:20)(cid:5)(cid:4) (cid:23)(cid:20)(cid:3)(cid:4) : (cid:14)(cid:9)(cid:28)(cid:16)(cid:16)(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) (cid:21) ?(cid:20)(cid:4)(cid:4)(cid:2)1(cid:22), .$(cid:12)(cid:10)!(cid:14)#(cid:2)(cid:31)(cid:28)#(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) (cid:21)(cid:3) -(cid:20)?(cid:29) -(cid:20)(cid:5)(cid:4) (cid:23)(cid:20)(cid:3)(cid:4) ,(cid:10)(cid:15)&(cid:28)(cid:8)&(cid:2)>(cid:7)#&(cid:11) ) (cid:4)(cid:20)(cid:3)- (cid:4)(cid:20)-(cid:4) (cid:4)(cid:20)-(cid:29) ,(cid:10)(cid:15)&(cid:28)(cid:8)&(cid:2)9(cid:14)(cid:15)(cid:17)&(cid:11) 9 (cid:4)(cid:20)(cid:29)(cid:4) (cid:4)(cid:20)(cid:29)(cid:29) (cid:4)(cid:20)(cid:5)(cid:4) ,(cid:10)(cid:15)&(cid:28)(cid:8)&(cid:27)&(cid:10)(cid:27).$(cid:12)(cid:10)!(cid:14)#(cid:2)(cid:31)(cid:28)# C (cid:4)(cid:20)(cid:3)(cid:4) = = (cid:31)(cid:27)(cid:13)(cid:6)(cid:12) (cid:30)(cid:20) (cid:31)(cid:7)(cid:15)(cid:2)(cid:30)(cid:2) (cid:7)!"(cid:28)(cid:16)(cid:2)(cid:7)(cid:15)#(cid:14)$(cid:2)%(cid:14)(cid:28)&"(cid:9)(cid:14)(cid:2)’(cid:28)(cid:18)(cid:2) (cid:28)(cid:9)(cid:18)((cid:2))"&(cid:2)’"!&(cid:2))(cid:14)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)*(cid:7)&(cid:11)(cid:7)(cid:15)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:11)(cid:28)&(cid:8)(cid:11)(cid:14)#(cid:2)(cid:28)(cid:9)(cid:14)(cid:28)(cid:20) (cid:3)(cid:20) (cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)(cid:7)!(cid:2)!(cid:28)*(cid:2)!(cid:7)(cid:15)(cid:17)"(cid:16)(cid:28)&(cid:14)#(cid:20) -(cid:20) (cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:7)(cid:15)(cid:17)(cid:2)(cid:28)(cid:15)#(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:7)(cid:15)(cid:17)(cid:2)(cid:12)(cid:14)(cid:9)(cid:2)(cid:25)(cid:22)(cid:6).(cid:2)0(cid:30)(cid:23)(cid:20)(cid:29)(cid:6)(cid:20) 1(cid:22),2 1(cid:28)!(cid:7)(cid:8)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)(cid:20)(cid:2)(cid:13)(cid:11)(cid:14)(cid:10)(cid:9)(cid:14)&(cid:7)(cid:8)(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)(cid:14)$(cid:28)(cid:8)&(cid:2) (cid:28)(cid:16)"(cid:14)(cid:2)!(cid:11)(cid:10)*(cid:15)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)!(cid:20) (cid:26).32 (cid:26)(cid:14)%(cid:14)(cid:9)(cid:14)(cid:15)(cid:8)(cid:14)(cid:2)(cid:21)(cid:7)’(cid:14)(cid:15)!(cid:7)(cid:10)(cid:15)((cid:2)"!"(cid:28)(cid:16)(cid:16)(cid:18)(cid:2)*(cid:7)&(cid:11)(cid:10)"&(cid:2)&(cid:10)(cid:16)(cid:14)(cid:9)(cid:28)(cid:15)(cid:8)(cid:14)((cid:2)%(cid:10)(cid:9)(cid:2)(cid:7)(cid:15)%(cid:10)(cid:9)’(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:12)"(cid:9)(cid:12)(cid:10)!(cid:14)!(cid:2)(cid:10)(cid:15)(cid:16)(cid:18)(cid:20) (cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:8)(cid:11)(cid:15)(cid:10)(cid:16)(cid:10)(cid:17)(cid:18)(cid:21)(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17),(cid:4)(cid:23)(cid:27)(cid:30)(cid:4)(cid:29)1 DS40044G-page 168 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A )(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:7)(cid:12)(cid:13)(cid:14)(cid:15)(cid:9)-(cid:17)(cid:7)(cid:8)(cid:9).(cid:11)(cid:7)(cid:13)$(cid:9)(cid:31)(cid:27)(cid:9)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:7)(cid:15),(cid:7)/(cid:6)(cid:9)(cid:20)0(cid:5)(cid:21)(cid:9)(cid:22)(cid:9)121(cid:9)(cid:25)(cid:25)(cid:9)(cid:26)(cid:27)(cid:8)(cid:28)(cid:9)(cid:29)-.(cid:31)(cid:30) 3(cid:14)(cid:13)*(cid:9)(cid:24)&’’(cid:9)(cid:25)(cid:25)(cid:9)((cid:27)(cid:19)(cid:13)(cid:7)(cid:15)(cid:13)(cid:9)(cid:5)(cid:6)(cid:19)/(cid:13)* (cid:31)(cid:27)(cid:13)(cid:6) 3(cid:10)(cid:9)(cid:2)&(cid:11)(cid:14)(cid:2)’(cid:10)!&(cid:2)(cid:8)"(cid:9)(cid:9)(cid:14)(cid:15)&(cid:2)(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:14)(cid:2)#(cid:9)(cid:28)*(cid:7)(cid:15)(cid:17)!((cid:2)(cid:12)(cid:16)(cid:14)(cid:28)!(cid:14)(cid:2)!(cid:14)(cid:14)(cid:2)&(cid:11)(cid:14)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:2)(cid:31)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17)(cid:2)(cid:22)(cid:12)(cid:14)(cid:8)(cid:7)%(cid:7)(cid:8)(cid:28)&(cid:7)(cid:10)(cid:15)(cid:2)(cid:16)(cid:10)(cid:8)(cid:28)&(cid:14)#(cid:2)(cid:28)&(cid:2) (cid:11)&&(cid:12)255***(cid:20)’(cid:7)(cid:8)(cid:9)(cid:10)(cid:8)(cid:11)(cid:7)(cid:12)(cid:20)(cid:8)(cid:10)’5(cid:12)(cid:28)(cid:8)4(cid:28)(cid:17)(cid:7)(cid:15)(cid:17) © 2009 Microchip Technology Inc. DS40044G-page 169

PIC16F627A/628A/648A NOTES: DS40044G-page 170 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A APPENDIX A: DATA SHEET APPENDIX B: DEVICE REVISION HISTORY DIFFERENCES Revision A The differences between the PIC16F627A/628A/648A devices listed in this data sheet are shown in TableB-1. This is a new data sheet. TABLE B-1: DEVICE DIFFERENCES Revision B Memory Revised 28-Pin QFN Pin Diagram Device Revised Figure 5-4 Block Diagram Flash RAM EEPROM Revised Register 7-1 TMR1ON Program Data Data Revised Example 13-4 Data EEPROM Refresh Routine PIC16F627A 1024 x 14 224 x 8 128 x 8 Revised Instruction Set SUBWF, Example 1 PIC16F628A 2048 x 14 224 x 8 128 x 8 Revised DC Characteristics 17-2 and 17-3 Revised Tables 17-4 and 17-6 PIC16F648A 4096 x 14 256 x 8 256 x 8 Corrected Table and Figure numbering in Section 17.0 Revision C General revisions throughout. Revisions to Section 14.0 – Special Features of the CPU. Section 18, modified graphs. Revision D Revise Example 13-2, Data EEPROM Write Revise Sections 17.2, Param No. D020 and 17.3, Param No. D020E Revise Section 18.0 graphs Revision E Section 19.0 Packaging Information: Replaced package drawings and added note. Revision F (03/2007) Replaced Package Drawings (Rev. AM); Replaced Development Support Section; Revised Product ID System. Revision G (10/2009) Corrected 28-lead QFN Package in Section 19.1. © 2009 Microchip Technology Inc. DS40044G-page 171

PIC16F627A/628A/648A APPENDIX C: DEVICE MIGRATIONS APPENDIX D: MIGRATING FROM OTHER PIC® This section describes the functional and electrical DEVICES specification differences when migrating between functionally similar devices. (such as from a This discusses some of the issues in migrating from PIC16F627 to a PIC16F627A). other PIC MCU devices to the PIC16F627A/628A/ C.1 PIC16F627/628 to a PIC16F627A/ 648A family of devices. 628A D.1 PIC16C62X/CE62X to PIC16F627A/ 1. ER mode is now RC mode. 628A/648A Migration 2. Code protection for the program memory has See Microchip web site for availability changed from code-protect sections of memory (www.microchip.com). to code-protect of the whole memory. The configuration bits CP0 and CP1 in the D.2 PIC16C622A to PIC16F627A/628A/ PIC16F627/628 do not exist in the PIC16F627A/ 648A Migration 628A. They have been replaced with one configuration bit<13> CP. See Microchip web site for availability 3. “Brown-out Detect (BOD)” terminology has (www.microchip.com). changed to “Brown-out Reset (BOR)” to better represent the function of the Brown-out circuitry. Note: This device has been designed to perform 4. Enabling Brown-out Reset (BOR) does not to the parameters of its data sheet. It has automatically enable the Power-up Timer been tested to an electrical specification (PWRT) the way it did in the PIC16F627/628. designed to determine its conformance 5. INTRC is now called INTOSC. with these parameters. Due to process 6. Timer1 Oscillator is now designed for differences in the manufacture of this 32.768kHz operation. In the PIC16F627/628, device, this device may have different the Timer1 oscillator was designed to run up to performance characteristics than its earlier 200kHz. version. These differences may cause this 7. The Dual-Speed Oscillator mode only works in device to perform differently in your the INTOSC oscillator mode. In the PIC16F627/ application than the earlier version of this 628, the Dual-Speed Oscillator mode worked in device. both the INTRC and ER oscillator modes. DS40044G-page 172 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A THE MICROCHIP WEB SITE CUSTOMER SUPPORT Microchip provides online support via our WWW site at Users of Microchip products can receive assistance www.microchip.com. This web site is used as a means through several channels: to make files and information easily available to • Distributor or Representative customers. Accessible by using your favorite Internet • Local Sales Office browser, the web site contains the following • Field Application Engineer (FAE) information: • Technical Support • Product Support – Data sheets and errata, • Development Systems Information Line application notes and sample programs, design resources, user’s guides and hardware support Customers should contact their distributor, documents, latest software releases and archived representative or field application engineer (FAE) for software support. Local sales offices are also available to help • General Technical Support – Frequently Asked customers. A listing of sales offices and locations is Questions (FAQ), technical support requests, included in the back of this document. online discussion groups, Microchip consultant Technical support is available through the web site program member listing at: http://support.microchip.com • Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives CUSTOMER CHANGE NOTIFICATION SERVICE Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. © 2009 Microchip Technology Inc. DS40044G-page 173

PIC16F627A/628A/648A READER RESPONSE It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip prod- uct. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150. Please list the following information, and use this outline to provide us with your comments about this document. To: Technical Publications Manager Total Pages Sent ________ RE: Reader Response From: Name Company Address City / State / ZIP / Country Telephone: (_______) _________ - _________ FAX: (______) _________ - _________ Application (optional): Would you like a reply? Y N Device: PIC16F627A/628A/648A Literature Number: DS40044G Questions: 1. What are the best features of this document? 2. How does this document meet your hardware and software development needs? 3. Do you find the organization of this document easy to follow? If not, why? 4. What additions to the document do you think would enhance the structure and subject? 5. What deletions from the document could be made without affecting the overall usefulness? 6. Is there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS40044G-page 174 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A INDEX CCP2X:CCP2Y Bits....................................................57 Clocking Scheme/Instruction Cycle....................................15 A CLRF Instruction...............................................................121 A/D CLRW Instruction..............................................................122 Special Event Trigger (CCP).......................................59 CLRWDT Instruction.........................................................122 Absolute Maximum Ratings..............................................135 CMCON Register................................................................63 ADDLW Instruction...........................................................119 Code Examples ADDWF Instruction...........................................................119 Data EEPROM Refresh Routine................................94 ANDLW Instruction...........................................................119 Code Protection................................................................113 ANDWF Instruction...........................................................119 COMF Instruction..............................................................122 Architectural Overview........................................................11 Comparator Assembler Block Diagrams MPASM Assembler...................................................132 I/O Operating Modes..........................................64 Modified Comparator Output..............................66 B Comparator Module....................................................63 Baud Rate Error..................................................................75 Configuration..............................................................64 Baud Rate Formula.............................................................75 Interrupts....................................................................67 BCF Instruction.................................................................120 Operation....................................................................65 Block Diagrams Reference...................................................................65 Comparator Compare (CCP Module).....................................................58 I/O Operating Modes..........................................64 Block Diagram............................................................58 Modified Comparator Output..............................66 CCP Pin Configuration...............................................59 I/O Ports CCPR1H:CCPR1L Registers.....................................58 RB0/INT Pin........................................................38 Software Interrupt.......................................................59 RB1/RX/DT Pin...................................................39 Special Event Trigger.................................................59 RB2/TX/CK Pin...................................................39 Timer1 Mode Selection...............................................59 RB3/CCP1 Pin....................................................40 CONFIG Register...............................................................98 RB4/PGM Pin.....................................................41 Configuration Bits...............................................................97 RB5 Pin...............................................................42 Crystal Operation................................................................99 RB6/T1OSO/T1CKI Pin......................................43 Customer Change Notification Service.............................173 RB7/T1OSI Pin...................................................44 Customer Notification Service..........................................173 RC Oscillator Mode...................................................101 Customer Support.............................................................173 USART Receive..........................................................82 D USART Transmit.........................................................80 BRGH bit.............................................................................75 Data EEPROM Memory......................................................91 Brown-Out Reset (BOR)...................................................103 EECON1 Register......................................................91 BSF Instruction.................................................................120 EECON2 Register......................................................91 BTFSC Instruction.............................................................120 Operation During Code Protection.............................95 BTFSS Instruction.............................................................121 Reading......................................................................93 Spurious Write Protection...........................................93 C Using..........................................................................94 C Compilers Write Verify.................................................................93 MPLAB C18..............................................................132 Writing to....................................................................93 CALL Instruction...............................................................121 Data Memory Organization.................................................17 Capture (CCP Module).......................................................58 DECF Instruction..............................................................122 Block Diagram.............................................................58 DECFSZ Instruction..........................................................123 CCP Pin Configuration................................................58 Development Support.......................................................131 CCPR1H:CCPR1L Registers......................................58 Device Differences............................................................171 Changing Between Capture Prescalers......................58 Device Migrations.............................................................172 Prescaler.....................................................................58 Dual-speed Oscillator Modes............................................101 Software Interrupt.......................................................58 E Timer1 Mode Selection...............................................58 Capture/Compare/PWM (CCP)...........................................57 EECON1 Register...............................................................92 Capture Mode. See Capture EECON1 register................................................................92 CCP1..........................................................................57 EECON2 register................................................................92 CCPR1H Register...............................................57 Errata....................................................................................5 CCPR1L Register...............................................57 External Crystal Oscillator Circuit.....................................100 CCP2..........................................................................57 F Compare Mode. See Compare PWM Mode. See PWM Fuses. See Configuration Bits Timer Resources.........................................................57 G CCP1CON Register............................................................57 General-Purpose Register File...........................................17 CCP1M Bits................................................................57 GOTO Instruction..............................................................123 CCP1X:CCP1Y Bits....................................................57 CCP2CON Register CCP2M<3:2> Bits.......................................................57 © 2009 Microchip Technology Inc. DS40044G-page 175

PIC16F627A/628A/648A I Internet Address...............................................................173 Interrupt Sources I/O Ports..............................................................................33 Capture Complete (CCP)............................................58 Bidirectional................................................................46 Compare Complete (CCP)..........................................59 Block Diagrams TMR2 to PR2 Match (PWM).......................................60 RB0/INT Pin........................................................38 Interrupts...........................................................................109 RB1/RX/DT Pin...................................................39 Interrupts, Enable Bits RB2/TX/CK Pin...................................................39 CCP1 Enable (CCP1IE Bit)........................................58 RB3/CCP1 Pin....................................................40 Interrupts, Flag Bits RB4/PGM Pin......................................................41 CCP1 Flag (CCP1IF Bit).............................................58 RB5 Pin...............................................................42 IORLW Instruction............................................................125 RB6/T1OSO/T1CKI Pin......................................43 IORWF Instruction............................................................125 RB7/T1OSI Pin...................................................44 PORTA........................................................................33 M PORTB........................................................................38 Memory Organization Programming Considerations.....................................46 Data EEPROM Memory..................................91, 93, 95 Successive Operations...............................................46 Microchip Internet Web Site..............................................173 TRISA.........................................................................33 Migrating from other PICmicro Devices............................172 TRISB.........................................................................38 MOVF Instruction..............................................................125 ID Locations......................................................................113 MOVLW Instruction...........................................................125 INCF Instruction................................................................124 MOVWF Instruction..........................................................126 INCFSZ Instruction............................................................124 MPLAB ASM30 Assembler, Linker, Librarian...................132 In-Circuit Serial Programming™.......................................114 MPLAB Integrated Development Environment Software..131 Indirect Addressing, INDF and FSR Registers....................30 MPLAB PM3 Device Programmer....................................134 Instruction Flow/Pipelining..................................................15 MPLAB REAL ICE In-Circuit Emulator System................133 Instruction Set MPLINK Object Linker/MPLIB Object Librarian................132 ADDLW.....................................................................119 ADDWF.....................................................................119 N ANDLW.....................................................................119 NOP Instruction................................................................126 ANDWF.....................................................................119 BCF...........................................................................120 O BSF...........................................................................120 OPTION Instruction..........................................................126 BTFSC......................................................................120 OPTION Register................................................................25 BTFSS......................................................................121 OPTION_REG Register......................................................25 CALL.........................................................................121 Oscillator Configurations.....................................................99 CLRF.........................................................................121 Oscillator Start-up Timer (OST)........................................103 CLRW.......................................................................122 CLRWDT...................................................................122 P COMF.......................................................................122 Package Marking Information...........................................163 DECF........................................................................122 Packaging Information......................................................163 DECFSZ....................................................................123 PCL and PCLATH...............................................................30 GOTO.......................................................................123 Stack...........................................................................30 INCF..........................................................................124 PCON Register...................................................................29 INCFSZ.....................................................................124 PIE1 Register......................................................................27 IORLW......................................................................125 Pin Functions IORWF......................................................................125 RC6/TX/CK...........................................................73–89 MOVF........................................................................125 RC7/RX/DT...........................................................73–89 MOVLW....................................................................125 PIR1 Register.....................................................................28 MOVWF....................................................................126 PORTA...............................................................................33 NOP..........................................................................126 PORTB...............................................................................38 OPTION....................................................................126 PORTB Interrupt...............................................................110 RETFIE.....................................................................126 Power Control/Status Register (PCON)............................104 RETLW.....................................................................127 Power-Down Mode (Sleep)...............................................112 RETURN...................................................................127 Power-On Reset (POR)....................................................103 RLF...........................................................................127 Power-up Timer (PWRT)..................................................103 RRF...........................................................................128 PR2 Register................................................................54, 60 SLEEP......................................................................128 Program Memory Organization...........................................17 SUBLW.....................................................................128 PWM (CCP Module)...........................................................60 SUBWF.....................................................................129 Block Diagram............................................................60 SWAPF.....................................................................129 Simplified PWM..................................................60 TRIS..........................................................................129 CCPR1H:CCPR1L Registers......................................60 XORLW.....................................................................130 Duty Cycle..................................................................61 XORWF.....................................................................130 Example Frequencies/Resolutions.............................61 Instruction Set Summary...................................................117 Period.........................................................................60 INT Interrupt......................................................................110 Set-Up for PWM Operation.........................................61 INTCON Register................................................................26 TMR2 to PR2 Match...................................................60 DS40044G-page 176 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A Q External Clock Input...................................................51 External Clock Input Timing........................................52 Q-Clock...............................................................................61 Oscillator.....................................................................53 Quick-Turnaround-Production (QTP) Devices......................9 Prescaler..............................................................51, 53 R Resetting Timer1........................................................53 RC Oscillator.....................................................................101 Resetting Timer1 Registers........................................53 RC Oscillator Mode Special Event Trigger (CCP)......................................59 Block Diagram...........................................................101 Synchronized Counter Mode......................................51 Reader Response.............................................................174 Timer Mode................................................................51 Registers TMR1H.......................................................................52 CCP1CON (CCP Operation).......................................57 TMR1L........................................................................52 CMCON (Comparator Configuration)..........................63 Timer2 CONFIG (Configuration Word)....................................98 Block Diagram............................................................54 EECON1 (EEPROM Control Register 1)....................92 Postscaler...................................................................54 INTCON (Interrupt Control).........................................26 PR2 register................................................................54 Maps Prescaler..............................................................54, 61 PIC16F627A.................................................18, 19 Timer2 Module............................................................54 PIC16F628A.................................................18, 19 TMR2 output...............................................................54 OPTION_REG (Option)..............................................25 TMR2 to PR2 Match Interrupt.....................................60 PCON (Power Control)...............................................29 Timing Diagrams PIE1 (Peripheral Interrupt Enable 1)...........................27 Timer0......................................................................147 PIR1 (Peripheral Interrupt Register 1)........................28 Timer1......................................................................147 Status..........................................................................24 USART T1CON Timer1 Control)..............................................50 Asynchronous Receiver......................................83 T2CON Timer2 Control)..............................................55 USART Asynchronous Master Transmission.............80 Reset.................................................................................101 USART Asynchronous Reception..............................83 RETFIE Instruction............................................................126 USART Synchronous Reception................................89 RETLW Instruction............................................................127 USART Synchronous Transmission...........................87 RETURN Instruction.........................................................127 Timing Diagrams and Specifications................................144 Revision History................................................................171 TMR0 Interrupt..................................................................110 RLF Instruction..................................................................127 TMR1CS bit........................................................................50 RRF Instruction.................................................................128 TMR1ON bit........................................................................50 TMR2ON bit........................................................................55 S TOUTPS0 bit......................................................................55 Serial Communication Interface (SCI) Module, See USART TOUTPS1 bit......................................................................55 Serialized Quick-Turnaround-Production (SQTP) Devices...9 TOUTPS2 bit......................................................................55 SLEEP Instruction.............................................................128 TOUTPS3 bit......................................................................55 Software Simulator (MPLAB SIM).....................................133 TRIS Instruction................................................................129 Special Event Trigger. See Compare TRISA.................................................................................33 Special Features of the CPU..............................................97 TRISB.................................................................................38 Special Function Registers.................................................20 U Status Register...................................................................24 SUBLW Instruction............................................................128 Universal Synchronous Asynchronous Receiver Transmitter SUBWF Instruction...........................................................129 (USART).....................................................................73 SWAPF Instruction............................................................129 Asynchronous Receiver Setting Up Reception..........................................85 T Asynchronous Receiver Mode T1CKPS0 bit.......................................................................50 Address Detect...................................................85 T1CKPS1 bit.......................................................................50 Block Diagram....................................................85 T1CON Register.................................................................50 USART T1OSCEN bit......................................................................50 Asynchronous Mode...................................................79 T2CKPS0 bit.......................................................................55 Asynchronous Receiver..............................................82 T2CKPS1 bit.......................................................................55 Asynchronous Reception............................................84 T2CON Register.................................................................55 Asynchronous Transmission......................................80 Timer0 Asynchronous Transmitter..........................................79 Block Diagrams Baud Rate Generator (BRG)......................................75 Timer0/WDT.......................................................48 Block Diagrams External Clock Input....................................................47 Transmit..............................................................80 Interrupt.......................................................................47 USART Receive.................................................82 Prescaler.....................................................................48 BRGH bit....................................................................75 Switching Prescaler Assignment.................................49 Sampling.........................................................76, 77, 78 Timer0 Module............................................................47 Synchronous Master Mode.........................................86 Timer1 Synchronous Master Reception.................................88 Asynchronous Counter Mode.....................................52 Synchronous Master Transmission............................86 Capacitor Selection.....................................................53 Synchronous Slave Mode...........................................89 Synchronous Slave Reception...................................90 © 2009 Microchip Technology Inc. DS40044G-page 177

PIC16F627A/628A/648A Synchronous Slave Transmit......................................89 V Voltage Reference Configuration...............................................................69 Voltage Reference Module.........................................69 W Watchdog Timer (WDT)....................................................111 WWW Address..................................................................173 WWW, On-Line Support........................................................5 X XORLW Instruction...........................................................130 XORWF Instruction...........................................................130 DS40044G-page 178 © 2009 Microchip Technology Inc.

PIC16F627A/628A/648A PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. X /XX XXX Examples: Device Temperature Package Pattern a) PIC16F627A - E/P 301 = Extended Range Temp., PDIP package, 20MHz, normal VDD lim- its, QTP pattern #301. Device: PIC16F627A/628A/648A:Standard VDD range 3.0V to b) PIC16LF627A - I/SO = Industrial Temp., 5.5V SOIC package, 20MHz, extended VDD PIC16F627A/628A/648AT:VDD range 3.0V to 5.5V limits. (Tape and Reel) PIC16LF627A/628A/648A:VDD range 2.0V to 5.5V PIC16LF627A/628A/648AT:VDD range 2.0V to 5.5V (Tape and Reel) Temperature I = -40°C to +85°C Range: E = -40°C to+125°C Package: P = PDIP SO = SOIC (Gull Wing, 7.50 mm body) SS = SSOP (5.30 mm ML = QFN (28 Lead) © 2009 Microchip Technology Inc. DS40044G-page 179

WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Asia Pacific Office India - Bangalore Austria - Wels 2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 91-80-3090-4444 Tel: 43-7242-2244-39 Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 91-80-3090-4080 Fax: 43-7242-2244-393 Tel: 480-792-7200 Harbour City, Kowloon India - New Delhi Denmark - Copenhagen Fax: 480-792-7277 Hong Kong Tel: 91-11-4160-8631 Tel: 45-4450-2828 Technical Support: Tel: 852-2401-1200 Fax: 91-11-4160-8632 Fax: 45-4485-2829 http://support.microchip.com Web Address: Fax: 852-2401-3431 India - Pune France - Paris www.microchip.com Australia - Sydney Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 Tel: 61-2-9868-6733 Fax: 91-20-2566-1513 Fax: 33-1-69-30-90-79 ADtullaunthta, GA Fax: 61-2-9868-6755 Japan - Yokohama Germany - Munich Tel: 678-957-9614 China - Beijing Tel: 81-45-471- 6166 Tel: 49-89-627-144-0 Tel: 86-10-8528-2100 Fax: 49-89-627-144-44 Fax: 678-957-1455 Fax: 81-45-471-6122 Fax: 86-10-8528-2104 Italy - Milan Boston Korea - Daegu Westborough, MA China - Chengdu Tel: 82-53-744-4301 Tel: 39-0331-742611 Tel: 774-760-0087 Tel: 86-28-8665-5511 Fax: 82-53-744-4302 Fax: 39-0331-466781 Fax: 774-760-0088 Fax: 86-28-8665-7889 Korea - Seoul Netherlands - Drunen Chicago China - Hong Kong SAR Tel: 82-2-554-7200 Tel: 31-416-690399 Itasca, IL Tel: 852-2401-1200 Fax: 82-2-558-5932 or Fax: 31-416-690340 Tel: 630-285-0071 Fax: 852-2401-3431 82-2-558-5934 Spain - Madrid Fax: 630-285-0075 China - Nanjing Malaysia - Kuala Lumpur Tel: 34-91-708-08-90 Cleveland Tel: 86-25-8473-2460 Tel: 60-3-6201-9857 Fax: 34-91-708-08-91 Independence, OH Fax: 86-25-8473-2470 Fax: 60-3-6201-9859 UK - Wokingham Tel: 216-447-0464 China - Qingdao Malaysia - Penang Tel: 44-118-921-5869 Fax: 216-447-0643 Tel: 86-532-8502-7355 Tel: 60-4-227-8870 Fax: 44-118-921-5820 Dallas Fax: 86-532-8502-7205 Fax: 60-4-227-4068 Addison, TX China - Shanghai Philippines - Manila Tel: 972-818-7423 Tel: 86-21-5407-5533 Tel: 63-2-634-9065 Fax: 972-818-2924 Fax: 86-21-5407-5066 Fax: 63-2-634-9069 Detroit China - Shenyang Singapore Farmington Hills, MI Tel: 86-24-2334-2829 Tel: 65-6334-8870 Tel: 248-538-2250 Fax: 86-24-2334-2393 Fax: 65-6334-8850 Fax: 248-538-2260 China - Shenzhen Taiwan - Hsin Chu Kokomo Tel: 86-755-8203-2660 Tel: 886-3-6578-300 Kokomo, IN Fax: 86-755-8203-1760 Fax: 886-3-6578-370 Tel: 765-864-8360 Fax: 765-864-8387 China - Wuhan Taiwan - Kaohsiung Tel: 86-27-5980-5300 Tel: 886-7-536-4818 Los Angeles Fax: 86-27-5980-5118 Fax: 886-7-536-4803 Mission Viejo, CA Tel: 949-462-9523 China - Xiamen Taiwan - Taipei Tel: 86-592-2388138 Tel: 886-2-2500-6610 Fax: 949-462-9608 Fax: 86-592-2388130 Fax: 886-2-2508-0102 Santa Clara China - Xian Thailand - Bangkok Santa Clara, CA Tel: 408-961-6444 Tel: 86-29-8833-7252 Tel: 66-2-694-1351 Fax: 408-961-6445 Fax: 86-29-8833-7256 Fax: 66-2-694-1350 China - Zhuhai Toronto Mississauga, Ontario, Tel: 86-756-3210040 Canada Fax: 86-756-3210049 Tel: 905-673-0699 Fax: 905-673-6509 03/26/09 DS40044G-page 180 © 2009 Microchip Technology Inc.