PIC16(L)F1782/1783 28-Pin 8-Bit Advanced Analog Flash Microcontroller Product Brief High-Performance RISC CPU: Analog Peripheral Features: • Only 49 Instructions • Analog-to-Digital Converter (ADC): • Operating Speed: - Fully differential 12-bit converter - DC – 32MHz clock input - 100 ksps conversion rate - DC – 125 ns instruction cycle - 11 single-ended channels • Interrupt Capability with Automatic Context - 5 differential channels Saving - Positive and negative reference selection • 16-Level Deep Hardware Stack with optional • 8-bit Digital-to-Analog Converter (DAC): Overflow/Underflow Reset - Output available externally • Direct, Indirect and Relative Addressing modes: - Positive and negative reference selection - Two full 16-bit File Select Registers (FSRs) - Internal connections to comparators, op - FSRs can read program and data memory amps, Fixed Voltage Reference (FVR) and ADC Extreme Low-Power (XLP) Management: • Three High-Speed Comparators: - 30 ns response time • Standby Current (PIC16LF1782/1783): - Rail-to-rail inputs - 50nA @ 1.8V, typical - Software selectable hysteresis • Watchdog Timer Current (PIC16LF1782/1783): - Internal connection to op amps, FVR and - 500nA @ 1.8V, typical DAC • Timer1 (32.768 kHz Real-Time Clock) Oscillator • Two Operational Amplifiers: Current (PIC16LF1782/1783): - Rail-to-rail inputs/outputs - 500nA @ 1.8V, typical - High/Low selectable Gain Bandwidth Product • Operating Current (PIC16LF1782/1783): - Internal connection to DAC and FVR - 4A @ 32kHz, 1.8V, typical • Fixed Voltage Reference (FVR): • Operating Current (PIC16LF1782/1783): - 1.024V, 2.048V and 4.096V output levels - 150A @ 1MHz, 1.8V, typical - Internal connection to ADC, Comparators and DAC Memory Features: Digital Peripheral Features: • Up to 4 KW Flash Program Memory: - Self-programmable under software control • Timer0: 8-Bit Timer/Counter with 8-Bit - Programmable code protection Programmable Prescaler - Programmable write protection • Enhanced Timer1: • 256 Bytes of Data EEPROM - 16-bit timer/counter with prescaler • Up to 512 Bytes of RAM - External Gate Input mode - Dedicated low-power 32kHz oscillator driver High-Performance PWM Controller: • Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler • Two Programmable Switch Mode Controller • Two Capture/Compare/PWM modules (CCP): (PSMC) modules: - 16-bit Capture, maximum resolution 12.5 ns - Digital and/or analog feedback control of - 16-bit Compare, max resolution 31.25 ns PWM frequency and pulse begin/end times - 10-bit PWM, max frequency 32 kHz - 16-bit Period, Duty Cycle and Phase • Master Synchronous Serial Port (SSP) with SPI - 16 ns clock resolution and I2CTM with: - Supports single PWM, complimentary, push- - 7-bit address masking pull and three-phase modes of operation - SMBus/PMBusTM compatibility - Dead-band control with 8-bit counter • Enhanced Universal Synchronous Asynchronous - Auto-shutdown and restart Receiver Transmitter (EUSART): - Leading and falling edge blanking - RS-232, RS-485 and LIN compatible - Burst mode - Auto-baud detect - Auto-wake-up on start Advance Information  2011 Microchip Technology Inc. DS41410B-page 1

PIC16(L)F1782/1783 Oscillator Features: I/O Features: • Operate up to 32 MHz from Precision Internal • Up to 24 I/O Pins and 1 Input-only Pin: Oscillator: - High current sink/source for LED drivers - Factory calibrated to ±1%, typical - Individually programmable interrupt-on- - Software selectable frequency range from change pins 32MHz to 31kHz - Individually programmable weak pull-ups • 31kHz Low-Power Internal Oscillator - Individual input level selection • 32.768 kHz Timer1 Oscillator: - Slew rate control on selected output pins - available as system clock - Open drain outputs on selected output pins - Low power RTC • External Oscillator Block with: General Microcontroller Features: - 4 crystal/resonator modes up to 32 MHz using 4x PLL • Power-Saving Sleep mode - 3 external clock modes up to 32 MHz • Power-on Reset (POR) • 4x Phase-Locked Loop (PLL) • Power-up Timer (PWRT) • Fail-Safe Clock Monitor: • Oscillator Start-up Timer (OST) - Detect and recover from external oscillator • Brown-out Reset (BOR) with Selectable Trip Point failure • Extended Watchdog Timer (WDT) • Two-Speed Start-up: • In-Circuit Serial ProgrammingTM (ICSPTM) - Minimize latency between code execution • In-Circuit Debug (ICD) and external oscillator start-up • Enhanced Low-Voltage Programming (LVP) • Operating Voltage Range: - 1.8V to 3.6V (PIC16LF1782/1783) - 2.3V to 5.5V (PIC16F1782/1783) TABLE 1: PIC16(L)F1782/1783 FAMILY TYPES h c y ts Device Program MemorFlash (words) Data EEPROM (bytes) SRAM (bytes) I/Os 12-bit A/D (ch) Comparators Operational Amplifiers 8-bit DAC Timers8/16-bit ogrammable SwiMode Controller(PSMC) CCP EUSART MSSP2(IC™/SPI) r P PIC16F1782 2048 256 256 25 11 3 2 1 2/1 2 2 1 1 PIC16LF1782 2048 256 256 25 11 3 2 1 2/1 2 2 1 1 PIC16F1783 4096 256 512 25 11 3 2 1 2/1 2 2 1 1 PIC16LF1783 4096 256 512 25 11 3 2 1 2/1 2 2 1 1 Advance Information DS41410B-page 2  2011 Microchip Technology Inc.

PIC16(L)F1782/1783 Note: Pin details are subject to change. FIGURE 1: 28-PIN DIAGRAM FOR PIC16(L)F1782/1783 SPDIP, SOIC, SSOP VPP/MCLR/RE3 1 28 RB7 RA0 2 27 RB6 RA1 3 26 RB5 RA2 4 25 RB4 RRRRVAAAAS3475S 56789 C16F1782/1783 C16LF1782/1783 2222204312 RRRRVBBBBDD3210 RA6 10 PI PI 19 VSS RC0 11 18 RC7 RC1 12 17 RC6 RC2 13 16 RC5 RC3 14 15 RC4 Note: See Table2 for the location of all peripheral functions. Advance Information  2011 Microchip Technology Inc. DS41410B-page 3

PIC16(L)F1782/1783 FIGURE 2: 28-PIN DIAGRAM FOR PIC16(L)F1782/1783 UQFN P P V R/ L C M 103/7654 AAEBBBB RRRRRRR 8765432 2222222 RA2 1 21 RB3 RA3 2 20 RB2 RA4 3 PIC16F1782/1783 19 RB1 RA5 4 18 RB0 PIC16LF1782/1783 VSS 5 17 VDD RA7 6 16 VSS RA6 7 15 RC7 01234 8911111 0123456 CCCCCCC RRRRRRR Note: See Table2 for the location of all peripheral functions. Advance Information DS41410B-page 4  2011 Microchip Technology Inc.

PIC16(L)F1782/1783 TABLE 2: 28-PIN ALLOCATION TABLE (PIC16(L)F1782/1783) P O SS ers I/O Pin SPDIP, SOIC, 28-Pin QFN ADC Reference Comparator Operation Amplifi 8-bit DAC Timers PSMC CCP EUSART MSSP Interrupt Pull-up Basic 8- 2 RA0 2 27 AN0+ — C1IN0- — — — — — — — IOC Y — AN0- C2IN0- C3IN0- RA1 3 28 AN1+ — C1IN1- OPA1OUT — — — — — — IOC Y — AN1- C2IN1- C3IN1- RA2 4 1 AN2+ VREF- C1IN0+ — DAC1OUT1 — — — — — IOC Y — AN2- C2IN0+ DAC1VREF- C3IN0+ RA3 5 2 AN3+ VREF+(1) C1IN1+ — DAC1VREF+ — — — — — IOC Y — AN3- RA4 6 3 — — C1OUT OPA1IN+ — T0CKI — — — — IOC Y — RA5 7 4 AN4+ — C2OUT(1) OPA1IN- — — — — — SS IOC Y — AN4- RA6 10 7 — — C2OUT(1) — — — — — — — IOC Y OSC2/ CLKOUT RA7 9 6 — VREF+(1) — — — — PSMC1CLK — — — IOC Y OSC1/ PSMC2CLK CLKIN RB0 21 18 AN12+ — C2IN1+ — — — PSMC1IN CCP1(1) — — INT/ Y — AN12- PSMC2IN IOC RB1 22 19 AN10+ — C1IN3- OPA2OUT — — — — — — IOC Y — AN10- C2IN3- C3IN3- RB2 23 20 AN8+ — — OPA2IN- — — — — — — IOC Y CLKR AN8- RB3 24 21 AN9+ — C1IN2- OPA2IN+ — — — CCP2(1) — — IOC Y — AN9- C2IN2- C3IN2- RB4 25 22 AN11+ — C3IN1+ — — — — — — — IOC Y — AN11- RB5 26 23 AN13+ — C3OUT — — T1G — — — SDO(1) IOC Y — AN13- RB6 27 24 — — — — — — — — TX(1) SDI(1) IOC Y ICSPCLK CK(1) SDA(1) RB7 28 25 — — — — DAC1OUT2 — — — RX(1) SCK(1) IOC Y ICSPDAT DT(1) SCL(1) RC0 11 8 — — — — — T1OSO PSMC1A — — — IOC Y — T1CKI RC1 12 9 — — — — — T1OSI PSMC1B CCP2(1) — — IOC Y — RC2 13 10 — — — — — — PSMC1C CCP1(1) — — IOC Y — RC3 14 11 — — — — — — PSMC1D — — SCK(1) IOC Y — SCL(1) RC4 15 12 — — — — — — PSMC1E — — SDI(1) IOC Y — SDA(1) RC5 16 13 — — — — — — PSMC1F — — SDO(1) IOC Y — RC6 17 14 — — — — — — PSMC2A — TX(1) — IOC Y — CK(1) RC7 18 15 — — — — — — PSMC2B — RX(1) — IOC Y — DT(1) RE3 1 26 — — — — — — — — — — IOC Y MCLR/ VPP VDD 20 17 — — — — — — — — — — — — VDD VSS 8, 5, — — — — — — — — — — — — VSS 19 16 Note 1: Pin functions can be assigned to one of two pin locations via software. Advance Information  2011 Microchip Technology Inc. DS41410B-page 5

PIC16(L)F1782/1783 NOTES: Advance Information DS41410B-page 6  2011 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, dsPIC, and may be superseded by updates. It is your responsibility to KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. PIC32 logo, rfPIC and UNI/O are registered trademarks of MICROCHIP MAKES NO REPRESENTATIONS OR Microchip Technology Incorporated in the U.S.A. and other WARRANTIES OF ANY KIND WHETHER EXPRESS OR countries. IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, INCLUDING BUT NOT LIMITED TO ITS CONDITION, MXDEV, MXLAB, SEEVAL and The Embedded Control QUALITY, PERFORMANCE, MERCHANTABILITY OR Solutions Company are registered trademarks of Microchip FITNESS FOR PURPOSE. Microchip disclaims all liability Technology Incorporated in the U.S.A. arising from this information and its use. Use of Microchip Analog-for-the-Digital Age, Application Maestro, CodeGuard, devices in life support and/or safety applications is entirely at dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, the buyer’s risk, and the buyer agrees to defend, indemnify and ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial hold harmless Microchip from any and all damages, claims, Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified suits, or expenses resulting from such use. No licenses are logo, MPLIB, MPLINK, mTouch, Omniscient Code conveyed, implicitly or otherwise, under any Microchip Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, intellectual property rights. PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2011, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 978-1-60932-881-8 Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Advance Information  2011 Microchip Technology Inc. DS41410B-page 7

Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Asia Pacific Office India - Bangalore Austria - Wels 2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 91-80-3090-4444 Tel: 43-7242-2244-39 Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 91-80-3090-4123 Fax: 43-7242-2244-393 Tel: 480-792-7200 Harbour City, Kowloon India - New Delhi Denmark - Copenhagen Fax: 480-792-7277 Hong Kong Tel: 91-11-4160-8631 Tel: 45-4450-2828 Technical Support: Tel: 852-2401-1200 Fax: 91-11-4160-8632 Fax: 45-4485-2829 http://support.microchip.com Web Address: Fax: 852-2401-3431 India - Pune France - Paris www.microchip.com Australia - Sydney Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 Tel: 61-2-9868-6733 Fax: 91-20-2566-1513 Fax: 33-1-69-30-90-79 ADtullaunthta, GA Fax: 61-2-9868-6755 Japan - Yokohama Germany - Munich Tel: 678-957-9614 China - Beijing Tel: 81-45-471- 6166 Tel: 49-89-627-144-0 Tel: 86-10-8528-2100 Fax: 49-89-627-144-44 Fax: 678-957-1455 Fax: 81-45-471-6122 Fax: 86-10-8528-2104 Italy - Milan Boston Korea - Daegu Westborough, MA China - Chengdu Tel: 82-53-744-4301 Tel: 39-0331-742611 Tel: 774-760-0087 Tel: 86-28-8665-5511 Fax: 82-53-744-4302 Fax: 39-0331-466781 Fax: 774-760-0088 Fax: 86-28-8665-7889 Korea - Seoul Netherlands - Drunen Chicago China - Chongqing Tel: 82-2-554-7200 Tel: 31-416-690399 Itasca, IL Tel: 86-23-8980-9588 Fax: 82-2-558-5932 or Fax: 31-416-690340 Tel: 630-285-0071 Fax: 86-23-8980-9500 82-2-558-5934 Spain - Madrid Fax: 630-285-0075 China - Hong Kong SAR Malaysia - Kuala Lumpur Tel: 34-91-708-08-90 Cleveland Tel: 852-2401-1200 Tel: 60-3-6201-9857 Fax: 34-91-708-08-91 Independence, OH Fax: 852-2401-3431 Fax: 60-3-6201-9859 UK - Wokingham Tel: 216-447-0464 China - Nanjing Malaysia - Penang Tel: 44-118-921-5869 Fax: 216-447-0643 Tel: 86-25-8473-2460 Tel: 60-4-227-8870 Fax: 44-118-921-5820 Dallas Fax: 86-25-8473-2470 Fax: 60-4-227-4068 Addison, TX China - Qingdao Philippines - Manila Tel: 972-818-7423 Tel: 86-532-8502-7355 Tel: 63-2-634-9065 Fax: 972-818-2924 Fax: 86-532-8502-7205 Fax: 63-2-634-9069 Detroit China - Shanghai Singapore Farmington Hills, MI Tel: 86-21-5407-5533 Tel: 65-6334-8870 Tel: 248-538-2250 Fax: 86-21-5407-5066 Fax: 65-6334-8850 Fax: 248-538-2260 China - Shenyang Taiwan - Hsin Chu Kokomo Tel: 86-24-2334-2829 Tel: 886-3-6578-300 Kokomo, IN Fax: 86-24-2334-2393 Fax: 886-3-6578-370 Tel: 765-864-8360 Fax: 765-864-8387 China - Shenzhen Taiwan - Kaohsiung Tel: 86-755-8203-2660 Tel: 886-7-213-7830 Los Angeles Fax: 86-755-8203-1760 Fax: 886-7-330-9305 Mission Viejo, CA Tel: 949-462-9523 China - Wuhan Taiwan - Taipei Tel: 86-27-5980-5300 Tel: 886-2-2500-6610 Fax: 949-462-9608 Fax: 86-27-5980-5118 Fax: 886-2-2508-0102 Santa Clara China - Xian Thailand - Bangkok Santa Clara, CA Tel: 408-961-6444 Tel: 86-29-8833-7252 Tel: 66-2-694-1351 Fax: 408-961-6445 Fax: 86-29-8833-7256 Fax: 66-2-694-1350 China - Xiamen Toronto Mississauga, Ontario, Tel: 86-592-2388138 Canada Fax: 86-592-2388130 Tel: 905-673-0699 China - Zhuhai Fax: 905-673-6509 Tel: 86-756-3210040 Fax: 86-756-3210049 08/04/10 Advance Information DS41410B-page 8  2011 Microchip Technology Inc.