PIC16(L)F1512/3 28-Pin Flash Microcontrollers with XLP Technology High-Performance RISC CPU: Extreme Low-Power Management • C Compiler Optimized Architecture PIC16LF1512/3 with nanoWatt XLP: • Only 49 Instructions • Sleep mode: 20 nA @ 1.8V, typical • Up to 7 Kbytes Linear Program Memory • Watchdog Timer: 300 nA @ 1.8V, typical Addressing • Secondary Oscillator: 600 nA @ 32 kHz, 1.8V, • Up to 256 Bytes Linear Data Memory Addressing typical • Operating Speed: • Operating Current: 30A/MHz @ 1.8V, typical - DC – 20MHz clock input @ 2.5V Special Microcontroller Features: - DC – 16MHz clock input @ 1.8V - DC – 200 ns instruction cycle • Operating Voltage Range: • Interrupt Capability with Automatic Context - 2.3V-5.5V (PIC16F1512/3) Saving - 1.8V-3.6V (PIC16LF1512/3) • 16-Level Deep Hardware Stack with Optional • Self-Programmable under Software Control Overflow/Underflow Reset • Power-on Reset (POR) • Direct, Indirect and Relative Addressing modes: • Power-up Timer (PWRT) - Two full 16-bit File Select Registers (FSRs) • Programmable Low-Power Brown-out Reset - FSRs can read program and data memory (LPBOR) • Extended Watchdog Timer (WDT) Flexible Oscillator Structure: • In-Circuit Serial Programming™ (ICSP™) via • 16 MHz Internal Oscillator Block: Two Pins - Factory calibrated to ± 1%, typical • In-Circuit Debug (ICD) via Two Pins - Software selectable frequency range from • Enhanced Low-Voltage Programming (LVP) 16MHz to 31kHz • Programmable Code Protection • 31kHz Low-Power Internal Oscillator • Low-Power Sleep mode • External Oscillator Block with: • 128 Bytes High-Endurance Flash: - Four crystal/resonator modes up to 20 MHz - 100,000 write Flash endurance (minimum) - Three external clock modes up to 20 MHz • Fail-Safe Clock Monitor: Peripheral Highlights: - Allows for safe shutdown if peripheral clock • Up to 25 I/O Pins (1 input-only pin): stops - High current sink/source 25mA/25mA • Two-Speed Oscillator Start-up - Individually programmable weak pull-ups • Oscillator Start-up Timer (OST) - Individually programmable interrupt-on-change Analog Features: (IOC) pins • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Analog-to-Digital Converter (ADC): • Enhanced Timer1: - 10-bit resolution - 16-bit timer/counter with prescaler - Up to 17 channels - External Gate Input mode - Special Event Triggers - Low-power 32 kHz secondary oscillator driver - Conversion available during Sleep • Timer2: 8-Bit Timer/Counter with 8-Bit Period - Hardware Capacitive Voltage Divider (CVD) Register, Prescaler and Postscaler - Double sample conversions • Two Capture/Compare (CCP) modules: - Two result registers • Master Synchronous Serial Port (MSSP) with SPI - Inverted acquisition and I2CTM with: - 7-bit pre-charge timer - 7-bit address masking - 7-bit acquisition timer - SMBus/PMBusTM compatibility - Two guard ring output drives • Enhanced Universal Synchronous Asynchronous - Adjustable sample and hold capacitor array Receiver Transmitter (EUSART) module: • Voltage Reference module: - RS-232, RS-485 and LIN compatible - Fixed Voltage Reference (FVR) with 1.024V, - Auto-Baud Detect 2.048V and 4.096V output levels - Auto-wake-up on start • Integrated Temperature Indicator Advance Information  2011-2012 Microchip Technology Inc. DS41610B-page 1

PIC16(L)F1512/3 PIC16(L)F151X/152X Family Types ADC Device Data Sheet Index Program MemoryFlash (words) Data SRAM(bytes) (2)I/O’s 10-bit (ch) vanced Control Timers(8/16-bit) EUSART 2MSSP (IC™/SPI) CCP (1)Debug XLP d A PIC16(L)F1512 (1) 2048 128 25 17 Y 2/1 1 1 2 I Y PIC16(L)F1513 (1) 4096 256 25 17 Y 2/1 1 1 2 I Y PIC16(L)F1516 (2) 8192 512 25 17 N 2/1 1 1 2 I Y PIC16(L)F1517 (2) 8192 512 36 28 N 2/1 1 1 2 I Y PIC16(L)F1518 (2) 16384 1024 25 17 N 2/1 1 1 2 I Y PIC16(L)F1519 (2) 16384 1024 36 28 N 2/1 1 1 2 I Y PIC16(L)F1526 (3) 8192 768 54 30 N 6/3 2 2 10 I Y PIC16(L)F1527 (3) 16384 1536 54 30 N 6/3 2 2 10 I Y Note 1: I - Debugging, Integrated on Chip; H - Debugging, Requires Debug Header. 2: One pin is input-only. Data Sheet Index: (Unshaded devices are described in this document.) 1: Future Product PIC16(L)F1512/13 Data Sheet, 28-Pin Flash, 8-bit Microcontrollers. 2: DS41452 PIC16(L)F1516/7/8/9 Data Sheet, 28/40/44-Pin Flash, 8-bit MCUs. 3: DS41458 PIC16(L)F1526/27 Data Sheet, 64-Pin Flash, 8-bit MCUs. FIGURE 1: 28-PIN SPDIP, SOIC, SSOP PACKAGE DIAGRAM FOR PIC16(L)F1512/3 28-Pin SPDIP, SOIC, SSOP VPP/MCLR/RE3 1 28 RB7/ICSPDAT/ICDDAT RA0 2 27 RB6/ICSPCLK/ICDCLK RA1 3 26 RB5 RA2 4 25 RB4 RA3 5 24 RB3 RRRVAAASS457 6789 PIC16F1512/3PIC16LF1512/3 22220312 RRRVBBDBD102 RA6 10 19 VSS 11 18 RC7 RC0 12 17 RC6 RC1 RC2 13 16 RC5 RC3 14 15 RC4 Advance Information DS41610B-page 2  2011-2012 Microchip Technology Inc.

PIC16(L)F1512/3 FIGURE 2: 28-PIN UQFN (4X4) PACKAGE DIAGRAM FOR PIC16(L)F1512/3 28-Pin UQFN TK AL DC DD CC PP T/IK/I V AL R/ DC L PP C SS M CC 1 0 3/ 7/I6/I54 A A E BBBB R R R RRRR 8765432 2222222 RA2 1 21 RB3 RA3 2 20 RB2 RA4 3 19 RB1 PIC16F1512/3 RA5 4 PIC16LF1512/3 18 RB0 VSS 5 17 VDD RA7 6 16 VSS RA6 7 15 RC7 0 1234 891 1111 01 2 3 456 CC C C CCC RR R R RRR Advance Information  2011-2012 Microchip Technology Inc. DS41610B-page 3

PIC16(L)F1512/3 TABLE 1: 28-PIN ALLOCATION TABLE (PIC16(L)F1512/3) P O S S C, N I/O SPDIP, SOI 28-Pin UQF A/D Timers CCP EUSART MSSP Interrupt Pull-up Basic n Pi 8- 2 RA0 2 27 AN0 — — — SS(2) — — — RA1 3 28 AN1 — — — — — — — RA2 4 1 AN2 — — — — — — — RA3 5 2 AN3/VREF+ — — — — — — — RA4 6 3 — T0CKI — — — — — — RA5 7 4 AN4 — — — SS(1) — — VCAP RA6 10 7 — — — — — — — OSC2/CLKOUT RA7 9 6 — — — — — — — OSC1/CLKIN RB0 21 18 AN12 — — — — INT/IOC Y — RB1 22 19 AN10 — — — — IOC Y — RB2 23 20 AN8 — — — — IOC Y — RB3 24 21 AN9 — CCP2(2) — — IOC Y — RB4 25 22 AN11 — — — — IOC Y — ADOUT RB5 26 23 AN13 T1G — — — IOC Y — RB6 27 24 ADGRDA — — — — IOC Y ICSPCLK/ICDCLK RB7 28 25 ADGRDB — — — — IOC Y ICSPDAT/ICDDAT RC0 11 8 — SOSCO/T1CKI — — — — — — RC1 12 9 — SOSCI CCP2(1) — — — — — RC2 13 10 AN14 — CCP1 — — — — — RC3 14 11 AN15 — — — SCK/SCL — — — RC4 15 12 AN16 — — — SDI/SDA — — — RC5 16 13 AN17 — — — SDO — — — RC6 17 14 AN18 — — TX/CK — — — — RC7 18 15 AN19 — — RX/DT — — — — RE3 1 26 — — — — — — Y MCLR/VPP VDD 20 17 — — — — — — — — VSS 8,19 5,16 — — — — — — — — NC — — — — — — — — — — Note 1: Peripheral pin location selected using APFCON register. Default location. 2: Peripheral pin location selected using APFCON register. Alternate location. Advance Information DS41610B-page 4  2011-2012 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, dsPIC, and may be superseded by updates. It is your responsibility to KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. PIC32 logo, rfPIC and UNI/O are registered trademarks of MICROCHIP MAKES NO REPRESENTATIONS OR Microchip Technology Incorporated in the U.S.A. and other WARRANTIES OF ANY KIND WHETHER EXPRESS OR countries. IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, INCLUDING BUT NOT LIMITED TO ITS CONDITION, MXDEV, MXLAB, SEEVAL and The Embedded Control QUALITY, PERFORMANCE, MERCHANTABILITY OR Solutions Company are registered trademarks of Microchip FITNESS FOR PURPOSE. Microchip disclaims all liability Technology Incorporated in the U.S.A. arising from this information and its use. Use of Microchip Analog-for-the-Digital Age, Application Maestro, chipKIT, devices in life support and/or safety applications is entirely at chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, the buyer’s risk, and the buyer agrees to defend, indemnify and dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, hold harmless Microchip from any and all damages, claims, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, suits, or expenses resulting from such use. No licenses are Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, conveyed, implicitly or otherwise, under any Microchip MPLINK, mTouch, Omniscient Code Generation, PICC, intellectual property rights. PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2011-2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620761021 QUALITY MANAGEMENT SYSTEM Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and CERTIFIED BY DNV Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures == ISO/TS 16949 == are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Advance Information  2011-2012 Microchip Technology Inc. DS41610B-page 5

Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Asia Pacific Office India - Bangalore Austria - Wels 2355 West Chandler Blvd. Suites 3707-14, 37th Floor Tel: 91-80-3090-4444 Tel: 43-7242-2244-39 Chandler, AZ 85224-6199 Tower 6, The Gateway Fax: 91-80-3090-4123 Fax: 43-7242-2244-393 Tel: 480-792-7200 Harbour City, Kowloon India - New Delhi Denmark - Copenhagen Fax: 480-792-7277 Hong Kong Tel: 91-11-4160-8631 Tel: 45-4450-2828 Technical Support: Tel: 852-2401-1200 Fax: 91-11-4160-8632 Fax: 45-4485-2829 http://www.microchip.com/ support Fax: 852-2401-3431 India - Pune France - Paris Web Address: Australia - Sydney Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 www.microchip.com Tel: 61-2-9868-6733 Fax: 91-20-2566-1513 Fax: 33-1-69-30-90-79 Atlanta Fax: 61-2-9868-6755 Japan - Osaka Germany - Munich Duluth, GA China - Beijing Tel: 81-66-152-7160 Tel: 49-89-627-144-0 Tel: 86-10-8569-7000 Fax: 49-89-627-144-44 Tel: 678-957-9614 Fax: 81-66-152-9310 Fax: 678-957-1455 Fax: 86-10-8528-2104 Japan - Yokohama Italy - Milan China - Chengdu Tel: 39-0331-742611 Boston Tel: 81-45-471- 6166 Tel: 86-28-8665-5511 Fax: 39-0331-466781 Westborough, MA Fax: 81-45-471-6122 Tel: 774-760-0087 Fax: 86-28-8665-7889 Korea - Daegu Netherlands - Drunen Fax: 774-760-0088 China - Chongqing Tel: 82-53-744-4301 Tel: 31-416-690399 Chicago Tel: 86-23-8980-9588 Fax: 82-53-744-4302 Fax: 31-416-690340 Itasca, IL Fax: 86-23-8980-9500 Korea - Seoul Spain - Madrid Tel: 630-285-0071 China - Hangzhou Tel: 82-2-554-7200 Tel: 34-91-708-08-90 Fax: 630-285-0075 Tel: 86-571-2819-3187 Fax: 82-2-558-5932 or Fax: 34-91-708-08-91 Cleveland Fax: 86-571-2819-3189 82-2-558-5934 UK - Wokingham Independence, OH China - Hong Kong SAR Malaysia - Kuala Lumpur Tel: 44-118-921-5869 Tel: 216-447-0464 Tel: 852-2401-1200 Tel: 60-3-6201-9857 Fax: 44-118-921-5820 Fax: 216-447-0643 Fax: 852-2401-3431 Fax: 60-3-6201-9859 Dallas China - Nanjing Malaysia - Penang Addison, TX Tel: 86-25-8473-2460 Tel: 60-4-227-8870 Tel: 972-818-7423 Fax: 86-25-8473-2470 Fax: 60-4-227-4068 Fax: 972-818-2924 China - Qingdao Philippines - Manila Detroit Tel: 86-532-8502-7355 Tel: 63-2-634-9065 Farmington Hills, MI Fax: 86-532-8502-7205 Fax: 63-2-634-9069 Tel: 248-538-2250 Fax: 248-538-2260 China - Shanghai Singapore Tel: 86-21-5407-5533 Tel: 65-6334-8870 Indianapolis Fax: 86-21-5407-5066 Fax: 65-6334-8850 Noblesville, IN Tel: 317-773-8323 China - Shenyang Taiwan - Hsin Chu Fax: 317-773-5453 Tel: 86-24-2334-2829 Tel: 886-3-5778-366 Fax: 86-24-2334-2393 Fax: 886-3-5770-955 Los Angeles Mission Viejo, CA China - Shenzhen Taiwan - Kaohsiung Tel: 949-462-9523 Tel: 86-755-8203-2660 Tel: 886-7-536-4818 Fax: 949-462-9608 Fax: 86-755-8203-1760 Fax: 886-7-330-9305 Santa Clara China - Wuhan Taiwan - Taipei Santa Clara, CA Tel: 86-27-5980-5300 Tel: 886-2-2500-6610 Tel: 408-961-6444 Fax: 86-27-5980-5118 Fax: 886-2-2508-0102 Fax: 408-961-6445 China - Xian Thailand - Bangkok Toronto Tel: 86-29-8833-7252 Tel: 66-2-694-1351 Mississauga, Ontario, Fax: 86-29-8833-7256 Fax: 66-2-694-1350 Canada China - Xiamen Tel: 905-673-0699 Tel: 86-592-2388138 Fax: 905-673-6509 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 11/29/11 Fax: 86-756-3210049 Advance Information DS41610B-page 6  2011-2012 Microchip Technology Inc.