Pb A product Line of Diodes Incorporated Lead-free Green PI5C3303 SOTiny™ 2:1 Mux/DeMux Bus Switch Features Description ¼ Near-Zero propagation delay PI5C3303 is a single 2:1 Mux/DeMux digital switch designed with ¼ 5Ω switches connect inputs to outputs a fast enable. When enabled using the Bus Enable (BE) pin, the “A” or “B” pin is directly connected to the “C” pin. The bus switch ¼ Direct bus connection when switches are ON introduces no additional propagation delay or additional ground ¼ Ultra Low Quiescent Power (0.1µA typical) bounce noise. – Ideally suited for notebook applications The PI5C3303 device has an active HIGH enable. ¼ Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) ¼ Halogen and Antimony Free. “Green” Device (Note 3) ¼ Packaging (Pb-free & Green available): – 6-pin plastic S0T23 (T) Block Diagram Pin Configuration A C BE BE 1 6 A VCC 2 5 C GND 3 4 B B Truth Table(1, 2) Pin Description BE A B C Function Pin Name Description L C X A Connect A & C BE Switch Enable H X C B Connect B & C A Bus A at pin 6 B Bus B at pin 4 Notes: 1. H = High Voltage Level C Bus C at pin 5 L = Low Voltage Level VCC Power X = Don’t Care GND Ground 2. A = I/O at pin 6 B = I/O at pin 4 C = I/O at pin 5 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 1 Diodes Incorporated

A product Line of Diodes Incorporated PI5C3303 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Note: Stresses greater than those listed under MAXIMUM Storage Temperature ..........................................................–65°C to +150°C RATINGS may cause permanent damage to the device. This Ambient Temperature with Power Applied .........................–40°C to +85°C is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the Supply Voltage to Ground Potential ......................................–0.5V to +7.0V operational sections of this specification is not implied. Ex- DC Input Voltage ..................................................................–0.5V to +7.0V posure to absolute maximum rating conditions for extended periods may affect reliability. DC Output Current .............................................................................120mA Power Dissipation .................................................................................0.5W DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ± 10%) Parameters Description Test Conditions(1) Min. Typ.(2) Max. Units VIH Input HIGH Voltage Guaranteed Logic HIGH Level 2.0 V VIL Input LOW Voltage Guaranteed Logic LOW Level –0.5 0.8 IIH Input HIGH Current VCC = Max., VIN = VCC ±1 IIL Input LOW Current VCC = Max., VIN = GND ±1 µA IOZ High Impedence Output Current VCC = Max., VOUT = 0V or VCC ±1 VCC = 4V, VIN = 2.4V, 10 20 ION = –15mA RON Switch On-Resistance(3) VCC = 4.5V, VIN = 0V, Ω 4 7 ION = 30mA or 64mA VCC = 4.5V, VIN = 2.4V, ION = –15mA 7 15 Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, TA = 25°C ambient and maximum loading. 3. Measured by the voltage drop between A and B pin at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the two (A, B) pins. Capacitance (TA = 25°C, f = 1 MHz) Parameters(1) Description Test Conditions Typ.(4) Units CIN Input Capacitance 3 COFF A/B Capacitance, Switch Off VIN = 0V 5 pF CON A/B Capacitance, Switch On 12 Notes: 1. This parameter is determined by device characterization but is not production tested. PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 2 Diodes Incorporated

A product Line of Diodes Incorporated PI5C3303 Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ.(2) Max. Units ICC Quiescent Power Supply Current VCC = Max. VIN = GND or VCC 0.1 3.0 µA Supply Current per Input @ TTL ∆ICC VCC = Max. VIN = 3.4V(3) 2.5 mA HIGH Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device. 2. Typical values are at VCC = 5.0V, +25°C ambient. 3. Per TTL driven input (VIN = 3.4V, control inputs only); A and B pins do not contribute to ICC. Switching Characteristics over Operating Range Parameters Description Test Conditions(3) VCC = 4.5V VCC = 4V Units Min. Max. Min. Max. tPLH Propagation Delay(1, 2) 0.25 0.25 tPHL A to B, B to A tPZH CL = 50pF Bus Enable Time 1.0 4.9 5.5 ns tPZL RL = 500Ω tPHZ Bus Disable Time 1.0 4.2 4.5 tPLZ Notes: 1. This parameter is guaranteed but not tested on Propagation Delays. 2. The bus switch contributes no propagational delay other than the RC delay of the On-Resistance of the switch and the load capacitance. The time constant for the switch alone is of the order of 0.25ns for 50pF load. Since his time constant is much smaller than the rise/fall times of typical driving signals, it adds very little propagational delay to the system. Propagational delay of the bus switch when used in a system is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. 3. See test circuit and waveforms. PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 3 Diodes Incorporated

A product Line of Diodes Incorporated PI5C3303 Test Circuit VCC 7.0V 500W VIN VOUT Pulse D.U.T Generator 50pF RT 500W CL Switch Positions(1) Test Switch Open Drain Disable LOW 7V Enable LOW All Other Inputs Open Notes: 1. CL = Load Capacitance: inlcudes jig and proble capacitance. RT = Termination Resistance: should be equal to the ZOUT of the Pulse Generator. Enable and Disable Timing Enable Disable Control 3V Input 1.5V 0V Notes: Output tPZL 3V tPLZ 3V • Input Control Enable = Low; Input Control Disable = Switch 1.5V High 0.3V VOL • Pulse Generator for All Pulses: Rate ≤ 1.0 MHz; ZOUT tPHZ ≤ 50Ω; tF, tR, ≤ 2.5ns tPZH VOH Output 1.5V 0.3V Normally 0V 0V High Part Marking ZX Package - Cu ZX Package ZX = PI5C3303TE ZX = PI5C3303TE ZXYW ZXYW Y: Year Y: Year W: Workweek W: Workweek Bar above X means Fab3 of MGN Bar above X means Fab3 of MGN Bar above W means Cu wire PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 4 Diodes Incorporated

A product Line of Diodes Incorporated PI5C3303 Packaging Mechanical: 6-SOT23 (T) 16-0064 For latest package info. please check: http://www.diodes.com/design/support/packaging/pericom-packaging/packaging-mechanicals-and-thermal-characteristics/ Ordering Information Ordering Code Package Code Package Description PI5C3303TEX T 6-Pin, Small Outline Transistor Plastic Package (SOT23) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. E = Pb-free and Green 5. X suffix = Tape/Reel PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 5 Diodes Incorporated

A product Line of Diodes Incorporated PI5C3303 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incor- porated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determina- tive format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incor- porated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com PI5C3303 www.diodes.com September 2018 Document Number DS41340 Rev 1-2 6 Diodes Incorporated

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D iodes Incorporated: PI3USB302ZBEX PI3USB14LE PI3USB14QE PI3USB14LEX PI3USB14QEX PI3B3253LE PI3USB14ZHEX PI3B16233AE PI3B3251QEX PI5C3303TEX PI3B3253QE PI3B16233AEX PI3B32160AE