PI01S/D Sries 1W DC/DC CONVERTER, High isolation, SIP-Package FEATURES  Efficiency up to 75%  SIP Package with Industry Standard Pinout  High Isolation Volage 3000VACrms  Lead free ,RoHs Complian  Industrial & Medical Safety Approval  Operating Temperature range - 25°C to +85°C  Low isolation Capacitance  >2 MHours MTBF  3 Years Product Warranty The PI01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 3,000VAC isolation. It allows a wide operating temperature range of –25°C to +85°C. With high isolation, PI01S/D is suitable for all kinds of medical device application. These high isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. Model List Model Input Output Output Current Input Current Load Max. capacitive Efficiency Number Voltage Voltage Regulation Load (typ.) (Range) Max. Min. @Max. Load @No Load @Max. Load VDC VDC mA mA mA(typ.) mA(typ.) % (max.) uF % PI01S0505A 5 200 4 303 10 66 PI01S0512A 12 80 2 291 8 680 66 PI01S0515A 5 15 65 1 295 8 66 55 PI01D0505A (4.5 ~ 5.5) ±5 ±100 ±2 303 10 66 PI01D0512A ±12 ±40 ±1 267 8 220* 72 PI01D0515A ±15 ±35 ±1 287 8 73 PI01S1205A 5 200 4 126 10 66 PI01S1212A 12 80 2 121 8 680 66 PI01S1215A 12 15 65 1 123 8 66 30 PI01D1205A (10.8 ~ 13.2) ±5 ±100 ±2 126 10 66 PI01D1212A ±12 ±40 ±1 108 8 220* 74 PI01D1215A ±15 ±35 ±1 117 8 75 * For each output DS_PI01S/D_08042014 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P1

Input Characteristics Parameter Model Min. Typ. Max. Unit 5V Input Models 4.5 5 5.5 Input Voltage Range 12V Input Models 10.8 12 13.2 VDC 5V Input Models -0.7 --- 9 Input Surge Voltage (1 sec. max.) 12V Input Models -0.7 --- 29 Reverse Polarity Input Current --- --- 0.3 A Input Filter All Models LC Filter Internal Power Dissipation --- --- 650 mW Output Characteristics Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- ±1.0 ±3.0 % Output Voltage Balance Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise (20MHz) --- 100 150 mV P-P Ripple & Noise (20MHz) Over Line, Load & Temp. --- --- 200 mV P-P Ripple & Noise (20MHz) --- --- 15 mV rms Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. Isolation and Safety Standards Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) 60 Seconds 3000 --- --- VACrms I/O Isolation Test Voltage Flash tested for 1 Second 4500 --- --- VPK I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --- 15 20 pF cUL/UL60950-1, CSA C22.2 No. 60950-1-03 Safety Standards UL60601-1,CSA C22.2 No.601-1 IEC/EN 60950-1, IEC/EN 60601-1 IEC60950-1 CB report, cUL/UL 60950-1 certificate Approvals UL60601-1 UL certificate General Characteristics Parameter Conditions Min. Typ. Max. Unit Switching Frequency 50 80 100 KHz MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 2,000,000 --- --- Hours Recommended Input Fuse 5V Input Models 12V Input Models 500mA Slow-Blow Type 200mA Slow-Blow Type Environmental Specifications Parameter Conditions Min. Max. Unit Operating Temperature Range (with Derating) Ambient -25 +85 ℃ Case Temperature --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ DS_PI01S/D_08042014 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P2

Power Derating Curve 100 Natural 80 convection %) 100LFM wer ( 60 200LFM Po 400LFM Output 40 20 0 ~ -25 0 20 40 60 80 100 110 Ambient Temperature ] Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Specifications subject to change without notice. DS_PI01S/D_08042014 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P3

Mechanical Drawing Mechanical Dimensions Pin Connections 22.0 [0.87] Pin Single Output Dual Output 1 +Vin +Vin 9] 2 -Vin -Vin 0.02] 5 [0.4 5 -Vout -Vout 0.5 [ 12. 6 No Pin Common 0.5 3.2[0.13] 7 +Vout +Vout [0.02] 3.502.54 7.62 2X2.54 ►All dimensions in mm (inches) [0.14 ][0.10] [0.30] [2X0.10] ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pins ±0.05 (±0.002) 21.0 [0.83] Bottom View 0] 3 1 2 5 6 7 5 [0. 7. 1] [00..5002] 0.25 [0.0 2.0 [0.08] Physical Outline Case Size : 22.0x7.5x12.5mm (0.87x0.30x0.49 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight : 3.9g DS_PI01S/D_08042014 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P4

Part Numbering System P I 01 S 05 12 A Number of Output Form factor Family series Watt Input Voltage Option Code Outputs Voltage D-DIP A~Z 01:1W S - Single 03:3.3V 03:3.3V A - Std. Functions P-SIP 02:2W D- Dual 05: 5V 05: 5V S-SMD 03:3W 12:12V 12:12V 04:4W 24: 24V 15: 15V 06:6W 48:48V 24: 24V WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PI01S/D_08042014 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc P5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D elta Electronics: PI01S1212A PI01D0515A PI01S1215A PI01D1215A PI01S0512A PI01D1205A PI01D1212A PI01D0505A PI01S0515A PI01S1205A PI01S0505A PI01D0512A