Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Overview Applications The PHE845 series is constructed of metallized For use as an electromagnetic interference (EMI) polypropylene film encapsulated with self-extinguishing suppression filter in across-the-line applications that resin in a box of material that meets the requirements of require X1 safety classification. Suitable for use in UL 94 V–0. situations in which capacitor failure does not pose a danger of electric shock. Benefits • Approvals: ENEC, UL, cUL • Class X1 (IEC 60384-14) • Rated voltage: 760 VAC 50/60 Hz • Capacitance range: 0.01 – 1.0 µF • Lead spacing: 22.5 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category 40/105/56/B, IEC 60068-1 • Tape & Reel in accordance with IEC 60286-2 • RoHS compliant and lead-free terminations • Operating temperature range of −40°C to +105°C • 100% screening factory test at 4,250 VDC • Self-healing properties Customer Part Number PHE845 V D 5100 M R06L2 Capacitance Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Tolerance X1, Metallized V = 760 D = 22.5 The last three digits K = ±10% See Ordering Options Polypropylene F = 27.5 represent significant M = ±20% Table R = 37.5 figures. The first digit specifies the total number of digits. KEMET Internal Part Number F 845 D D 103 M 760 C Capacitor Lead Spacing Capacitance Rated Voltage Series Size Code Capacitance Code (pF) Packaging Class (mm) Tolerance (VAC) F = Film X1, Metallized D = 22.5 See First two digits represent K = ±10% 760 = 760 See Ordering Polypropylene F = 27.5 Dimension significant figures. Third M = ±20% Options Table R = 37.5 Table digit specifies number of zeros. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20191 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Ordering Options Table Lead KEMET Legacy Spacing Lead Length Lead and Lead and Type of Leads and Packaging Nominal (mm) Packaging Packaging (mm) Code Code Standard Lead and Packaging Options Bulk (Tray)–Short Leads 6 +0/-1 C R06L2(1) Other Lead and Packaging Options 22.5 Pizza Pack 6 +0/−1 Z R06L2(1) Bulk (Tray)–Long Leads 30 +0/−1 ALW0L R30L2 Tape & Reel (Standard Reel) H= 18.5 ±0.5 L R17T0 0 Tape & Reel (Large Reel) H= 18.5 ±0.5 P R17T1 0 Standard Lead and Packaging Options Bulk (Tray)–Short Leads 6 +0/−1 C R06L2(1) Other Lead and Packaging Options 27.5 Pizza Pack 6 +0/−1 Z R06L2(1) Bulk (Tray)–Long Leads 30 +0/−1 ALW0L R30L2 Tape & Reel (Large Reel) H= 18.5 ±0.5 P R17T1 0 Standard Lead and Packaging Options Bulk (Tray)–Short Leads 6 +0/−1 C R06L2(1) 37.5 Other Lead and Packaging Options Pizza Pack 6 +0/−1 Z R06L2(1) (1) Please specify Bulk (Tray) or Pizza Packaging © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20192 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p KEMET Size Legacy Size p B H L d Code Code Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance DD D13 22.5 ±0.4 6.5 Maximum 14.5 Maximum 26.0 Maximum 0.8 ±0.05 DG D17 22.5 ±0.4 7.0 Maximum 16.5 Maximum 26.0 Maximum 0.8 ±0.05 DM D15 22.5 ±0.4 9.0 Maximum 18.5 Maximum 26.0 Maximum 0.8 ±0.05 DR D18 22.5 ±0.4 10.5 Maximum 19.0 Maximum 26.0 Maximum 0.8 ±0.05 DT D16 22.5 ±0.4 11.0 Maximum 21.5 Maximum 26.0 Maximum 0.8 ±0.05 DW D20 22.5 ±0.4 13.5 Maximum 23.0 Maximum 26.0 Maximum 0.8 ±0.05 DY D19 22.5 ±0.4 15.5 Maximum 24.5 Maximum 26.0 Maximum 0.8 ±0.05 FE F11 27.5 ±0.4 10.5 Maximum 20.5 Maximum 31.5 Maximum 0.8 ±0.05 FG F12 27.5 ±0.4 11.5 Maximum 22.5 Maximum 31.5 Maximum 0.8 ±0.05 FK F03 27.5 ±0.4 13.5 Maximum 23.0 Maximum 31.5 Maximum 0.8 ±0.05 FS F15 27.5 ±0.4 19.0 Maximum 29.0 Maximum 31.5 Maximum 0.8 ±0.05 FV F16 27.5 ±0.4 21.0 Maximum 30.0 Maximum 31.5 Maximum 0.8 ±0.05 RH R04 37.5 ±0.5 15.0 Maximum 26.0 Maximum 41.0 Maximum 1.0 ±0.05 RK R02 37.5 ± 0.5 16.5 Maximum 32.0 Maximum 41.0 Maximum 1.0 ±0.05 RM R03 37.5 ±0.5 19.0 Maximum 36.0 Maximum 41.0 Maximum 1.0 ±0.05 RP R06 37.5 ±0.5 21.0 Maximum 38.0 Maximum 41.0 Maximum 1.0 ±0.05 Note: See the Ordering Options Table for lead length (LL) options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20193 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Performance Characteristics Dielectric Polypropylene film Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type. Triple design. Leads Tinned wire Protection Plastic case, thermosetting resin-filled. Box material is solvent-resistant and flame-retardant according to UL94 V–0. Rated Voltage (V ) 760 VAC 50/60 Hz R Capacitance Range 0.010 – 1.0 µF Capacitance Values E6 series (IEC 60063) Capacitance Tolerance ±20% standard, ±10% option Temperature Range -40°C to 105°C Climatic Category 40/105/56/B IEC 60068-1 Approvals ENEC, UL, cUL Related Documents EN/IEC 60384-14:2005, UL 60384-14, CAN/CSA E60384-14:09 Maximum Values at +23°C Frequency C ≤ 0.1 μF 0.1 µF < C ≤ 1 µF Dissipation Factor (tanδ) 1 kHz 0.1% 0.1% 10 kHz 0.2% 0.4% 100 kHz 0.6% - The 100% screening factory test is carried out at 4,250 VDC. The voltage level is selected to meet the Test Voltage Between requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not Terminals permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Resonance Frequency Tabulated self-resonance frequencies f (see Table 1 – Ratings & Part Number Reference) o Measured at +25°C ±5°C, according to IEC 60384-2 Minimum Values Between Terminals Insulation Resistance C ≤ 0.33 μF C > 0.33 μF ≥ 30,000 MΩ ≥ 10,000 MΩ • µF In DC Applications Recommended voltage ≤ 1,500 VDC © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20194 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Environmental Test Data Test IEC Publication Procedure 1.25 x V VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 Endurance IEC 60384-14:2005 R second, 1,000 hours at upper rated temperature 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Vibration IEC 60068-2-6 Test Fc No visible damage. No open or short circuit. 1,000 bumps at 390 m/s2 Bump IEC 60068-2-29 Test Eb No visible damage. No open or short circuit. Upper and lower rated temperature 5 cycles Change of Temperature IEC 60068-2-14 Test Na No visible damage. Active Flammability IEC 60384-14:2005 V + 20 surge pulses at 4 kV (pulse every 5 seconds) R Passive Flammability IEC 60384-14:2005 IEC 60384–1, IEC 60695–11–5 Needle Flame Test Damp Heat Steady State IEC 60068-2-78 Test Cab +40°C and 90 – 95% RH, 56 days Approvals Certification Body Mark Specification File Number Intertek Semko AB EN/IEC 60384-14 SE/0140–17E UL 60384 and UL CAN/CSA E60384-14:09 E73869 (760 VAC) Environmental Compliance All KEMET EMI capacitors are RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20195 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Table 1 – Ratings & Part Number Reference Size Code Maximum dV/dt Capacitance Lead f New KEMET Legacy Part (New/ Dimensions in mm o (V/ Value (µF) Spacing (p) (MHz) Part Number Number Legacy) B H L µs) 0.010 DD/D13 6.5 14.5 26.0 22.5 11 100 F845DD103(1)760(2) PHE845VD5100(1)(2) 0.015 DD/D13 6.5 14.5 26.0 22.5 9.2 100 F845DD153(1)760(2) PHE845VD5150(1)(2) 0.022 DD/D13 6.5 14.5 26.0 22.5 7.6 100 F845DD223(1)760(2) PHE845VD5220(1)(2) 0.033 DF/D17 7.0 16.5 26.0 22.5 6.4 100 F845DF333(1)760(2) PHE845VD5330(1)(2) 0.047 DM/D15 9.0 18.5 26.0 22.5 5.3 100 F845DM473(1)760(2) PHE845VD5470(1)(2) 0.068 DR/D18 10.5 19.0 26.0 22.5 4.4 100 F845DR683(1)760(2) PHE845VD5680(1)(2) 0.10 DT/D16 11.0 21.5 26.0 22.5 3.5 100 F845DT104(1)760(2) PHE845VD6100(1)(2) 0.15 DW/D20 13.5 23.0 26.0 22.5 3.1 100 F845DW154(1)760(2) PHE845VD6150(1)(2) 0.22 DY/D19 15.5 24.5 26.0 22.5 2.7 100 F845DY224M760(2) PHE845VY6220M(2) 0.10 FE/F11 10.5 20.5 31.5 27.5 3.4 100 F845FE104(1)760(2) PHE845VF6100(1)(2) 0.15 FG/F12 11.5 22.5 31.5 27.5 3.0 100 F845FG154(1)760(2) PHE845VF6150(1)(2) 0.22 FK/F03 13.5 23.0 31.5 27.5 2.4 100 F845FK224(1)760(2) PHE845VF6220(1)(2) 0.33 FS/F15 19.0 29.0 31.5 27.5 2.0 100 F845FS334(1)760(2) PHE845VF6330(1)(2) 0.47 FV/F16 21.0 30.0 31.5 27.5 1.6 100 F845FV474M760(2) PHE845VZ6470M(2) 0.47 RH/R04 15.0 26.0 41.0 37.5 1.6 100 F845RH474M760(2) PHE845VW6470M(2) 0.47 RK/R02 16.5 32.0 41.0 37.5 1.6 100 F845RK474(1)760(2) PHE845VR6470(1)(2) 0.68 RM/R03 19.0 36.0 41.0 37.5 1.2 100 F845RM684(1)760(2) PHE845VR6680(1)(2) 1.0 RP/R06 21.0 38.0 41.0 37.5 1.0 100 F845RP105M760(2) PHE845VW7100M(2) Capacitance Size Code (New/ B H dV/dt New KEMET Legacy L (mm) Lead Spacing (p) f (MHz) Value (µF) Legacy) (mm) (mm) o (V/µs) Part Number Part Number (1) M = ±20%, K = ±10%. (2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20196 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This implementation has increased the liquidus temperature from 183ºC for SnPb eutectic alloys to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the recommended limits may result in degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface-mount components. Insert through-hole parts after curing the surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum of two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual 2 +3 seconds maximum 260°C soldering with a soldering iron. 250 First wave Second wave 200 Recommended Soldering Temperature C) ∆T < 150°C Cooling 345000 mperature (°150 Prehea1ti1n5g°C max cccaaa 235.°°5CC°//Css/eescceoocnnoddnd typical mperature (°C)235000 Te10500 Tpreheat 100°C Typical Soldering iron bit te112050000 0 0 40 80 T1i2m0e (s) 160 200 240 50 0 0 1 2 3 4 5 6 7 8 Soldering time (seconds) Soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20197 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process. Figure 1 Maximum Maximum Preheat Peak Soldering Temperature Dielectric Temperature Film Material Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch ≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene 150°C 150°C 160°C 270°C 270°C Sulphide 2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature is below the limit inside the element. Maximum Temperature Dielectric Film Material Measured Inside the Element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath, as in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and then pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double-wave flow soldering outlined in this document. However, instead of two baths, there is only one with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double-wave flow soldering. Great care must be taken so that the parts do not overheat. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/20198 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Construction Detailed Cross Section Molded Plastic Single-sided Metallized Molded Plastic Self-Extinguishing Case Polypropylene Film Case Resin (First Layer) Single-sided Metallized Polypropylene Film (Second Layer) FILM WINDING SCHEME OPTIONS Margin Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Margin Metal Contact Polypropylene Double-sided Film Dielectric Metal Contact Layer Metallized Layer Single-sided Single-sided Double-sided Polypropylene Polyester Carrier PoMlyeptraollpizyeledn e Margin PoMlyeptraollpizyeledn e MPoetlyaellsizteerd Film Dielectric Film Single-sided Film Film Carrier Metallized Film Polypropylene Film Leads 1 Section 2 Sections 1 Section 2 Sections Winding Scheme Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Single-sided Film Film Carrier Metallized Film Polypropylene Film 3 Sections 4 Sections 3 Sections 4 Sections Metallized Impregnated Paper Metallized Polyphenylene Polypropylene Film/Foil Sulfide Film (SMR) Single-sided Metallized Metal Foil Metal Foil Polypropylene Metallized Polypropylene Film Impregnated Metallized Polyphenyl- Film Dielectric Paper ene Sulfide Film with Polypropylene Vacuum-Evaporated Film Dielectric Aluminum Electrodes © KEMET E1l eScetcrtoionnics Corporation • KEMET Tower • One Ea1s St eBcrtoiownard Boulevard F3109_PHE845_X1_7610 S •e 2c/ti2o8n/20199 2 Sections Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Metallized Polyester Film AXIAL - Polypropylene Film/Foil Single-sided Polypropylene Single-sided Metallized Film Dielec- Metallized Polyester tric Polypropylene Film Film Polypropylene 1 Section Metal Foil Metal Foil Film Dielectric 1 Section 2 Sections AXIAL - Single-sided Metallized AXIAL - Single-sided Metallized AXIAL - Double-sided Polypropylene Film Polyester Film Metallized Polyester Film Single-sided Single-sided Double-sided Polypropylene Metallized Metallized Metallized Film Dielectric Polypropylene Polyester Polyester Carrier Film Film Film Single-sided Metallized Polypropylene Film 1 Section 1 Section 2 Sections

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Marking FRONT TOP RIFA Logo Series Rated Approval Voltage Marks IEC Climatic Category Capacitance Manufacturing Capacitance Tolerance Date Code Manufacturing Date Code (IEC-60062) Y = Year, Z = Month Year Code Month Code 2000 M January 1 2001 N February 2 2002 P March 3 2003 R April 4 2004 S May 5 2005 T June 6 2006 U July 7 2007 V August 8 2008 W September 9 2009 X October O 2010 A November N 2011 B December D 2012 C 2013 D 2014 E 2015 F 2016 H 2017 J 2018 K 2019 L 2020 M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/201190 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C Packaging Quantities Bulk Standard Large Ammo Lead KEMET Legacy Thickness Height Length Short Reel Reel Bulk Spacing Size Code Size Code (mm) (mm) (mm) Leads ø 355 mm ø 500 mm (Pizza) DD D13 6.5 14.5 26.0 234 300 600 440 DH D14 8.0 16.0 26.0 186 250 500 352 DM D15 9.0 18.5 26.0 308 250 500 308 DT D16 11.0 21.5 26.0 253 200 400 253 22.5 DF D17 7.0 16.5 26.0 216 300 600 396 DR D18 10.5 19.0 26.0 264 200 400 264 DY D19 15.5 24.5 26.0 176 110 250 176 DW D20 13.5 23.0 26.0 209 160 300 209 FK F03 13.5 23.0 31.5 171 250 171 FE F11 10.5 20.5 31.5 216 350 216 FG F12 11.5 22.5 31.5 198 300 198 FM F13 14.5 24.5 31.5 153 250 153 FR F14 17.5 28.0 31.5 126 126 27.5 FS F15 19.0 29.0 31.5 117 117 FV F16 21.0 30.0 31.5 108 108 FH F17 21.0 12.5 31.5 108 108 FT F18 31.0 18.5 31.5 72 72 FQ F19 27.5 16.0 31.5 81 81 RK R02 16.5 32.0 41.0 105 105 RM R03 19.0 36.0 41.0 91 91 RH R04 15.0 26.0 41.0 119 119 37.5 RF R05 13.0 24.0 41.0 140 140 RP R06 21.0 38.0 41.0 84 84 RS R08 28.0 43.0 41.0 54 54 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/201191 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Lead Spacing 5 mm Lead Spacing 7.5 mm Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors 0 0 PHE845, Class X1, 760 VAC, 105°C Lead Taping & Packaging (IEC 60286–2) Lead Spacing 10 – 15mm Lead Spacing 22.5 – 27.5 mm 0 0 Formed Leads from 10 aTnad p1i5n mgm S tpoe 7c.5ifi mcmation Dimensions (mm) Description Symbol Lead Space Tolerance 22.5 27.5 Lead Spacing F 22.5 27.5 +0.6/−0.1 0 Carrier Tape Width W 18 18 +1/−0.5 Hold Down Tape Width W 5 5 Minimum 0 Hole Position W 9 9 +0.75/−0.5 1 Hold Down Tape Position W 3 3 Maximum 2 Feed Hole Diameter D 4 4 ±0.2 0 Feed-hole Lead Space * P 12.7 12.7 ±0.2 ** 0 Centering of the Lead Wire P 7.8 5.3 ±0.7 1 Component Alignment ∆h 2 2 ±2 Deviation Tape – Plane ∆p 1.3 1.3 Maximum Tape Thickness t 0.9 0.9 Maximum Height of Component H *** 18.5 18.5 ±0.5 from Tape Center 0 *Available also 15mm **Maximum 1 mm on 20 lead spaces *** H = 16.5 mm is available upon request 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/201192 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE845, Class X1, 760 VAC, 105°C KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3109_PHE845_X1_760 • 2/28/201193 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: PHE845VW7100MR06L2 PHE845VR6470MR06L2 PHE845VR6680MR06L2 PHE845VD5100MR06L2 PHE845VD5150MR06L2 PHE845VD5220MR06L2 PHE845VD5330MR06L2 PHE845VD5470MR06L2 PHE845VD5680MR06L2 PHE845VD6100MR06L2 PHE845VD6150MR06L2 PHE845VF6100MR06L2 PHE845VF6150MR06L2 PHE845VF6330MR06L2 PHE845VY6220MR06L2 PHE845VZ6470MR06L2 PHE845VF6220MR17L2 PHE845VF6220MR06L2 PHE845VF6100MR30L2 PHE845VW7100MR30L2 PHE845VZ6470MR30L2 PHE845VF6220MR30L2 PHE845VD5220MR30L2 PHE845VY6220MR30L2 PHE845VD5100MR30L2 PHE845VD5470MR30L2 PHE845VD6100MR30L2 PHE845VD5470MR30LL2 F845FG154K760C F845DT104M760ALW0L