pHE840m RoHS Compliant •Emi suppressor, class x2, metallized polypropylene •0.01 – 10.0 µf, 275/280 vac, +105°c • small dimensions including low profile capacitors L B tYpiCaL appLiCations ConstRuCtion For worldwide use as electromagnetic Metallized polypropylene film encapsulated interference suppressor in all X2 and with selfextinguishing epoxy resin in a box across-the-line applications. of material recognized to UL 94 V–0. H Not for use in series with the mains. 0.5 See www.kemet.com for more information. tECHniCaL data p ∅ d l b rated voltage 275 VAC 50/60 Hz (ENEC) 280 VAC 50/60 Hz (UL, cUL) p d std l max l b capacitance range 0.01 – 10.0 µF 7.5 ± 0.4 0.6 17 20 ±0.4 capacitance tolerance ± 20% standard, ± 10% option, ± 5% on request 10.0 ± 0.4 0.6 17 30 ±0.4 15.0 ± 0.4 0.8 17 30 ±0.4 temperature range –55 to +105°C 22.5 ± 0.4 0.8 6 30 ±0.4 27.5 ± 0.4 0.8 6 30 ±0.4 climatic category 55/105/56/B 37.5 ± 0.5 1.0 6 30 ±0.7 approvals ENEC, UL, cUL Tolerance in lead length dissipation factor Maximum values at +23°C < 30 mm +0mm –1 C ≤ 0.1 µF 0.1µF < C ≤ 1 µF C > 1 µF 1 kHz 0.1% 0.1% 0.1% 30 mm + 5 mm –0 10 kHz 0.2% 0.4% 0.8% 100 kHz 0.6% – – test voltage between The 100% screening factory test is carried out at 2200 terminals VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. insulation resistance C ≤ 0.33 µF: ≥ 30 000 MΩ C > 0.33 µF: ≥ 10 000 s in dc applications Recommended voltage ≤ 760 VDC EnViRonmEntaL tEst data Endurance EN/IEC 60384-14:2005 1.25 x U VAC 50 Hz, R once every hour increased to 1000 VAC for 0.1 s, 1000 h at upper rated temperature vibration IEC 60068–2–6 3 directions at 2 hours each, No visible damage Test Fc 10–55 Hz at 0.75 mm or 98 m/s2 No open or short circuit Bump IEC 60068–2–29 1000 bumps at No visible damage Test Eb 390 m/s2 No open or short circuit change of temperature IEC 60068–2–14 Upper and lower rated No visible damage Test Na temperature 5 cycles active flammability EN/IEC 60384-14:2005 Passive flammability EN/IEC 60384-14:2005 Enclosure material of UL94V–0 flammability class humidity IEC 60068-2-3 +40°C and 56 days Test Ca 90 – 95% R.H.

PhE840m aRtiCLE taBLE capaci- Box max dimensions max capaci- Box max dimensions max tance code in mm f du/dt article code tance code in mm f du/dt article code o o µf B h l mhz v/µs µf B h l mhz v/µs lEad sPacinG 7.5 mm lEad sPacinG 22.5 mm 0.010 K01 4.0 8.0 10.0 14 100 PHE840MK5100MK01R17 0.22 D13 6.5 14.5 26.0 2.1 100 PHE840MD6220MD13R06L2 0.012 K01 4.0 8.0 10.0 13 100 PHE840MK5120MK01R17 0.27 D17 7.0 16.5 26.0 1.9 100 PHE840MD6270MD17R06L2 0.015 K01 4.0 8.0 10.0 12 100 PHE840MK5150MK01R17 0.33 D17 7.0 16.5 26.0 1.8 100 PHE840MD6330MD17R06L2 0.018 K03 5.0 11.0 10.0 11 100 PHE840MK5180MK03R17 0.39 D14 8.0 16.0 26.0 1.7 100 PHE840MD6390MD14R06L2 0.022 K03 5.0 11.0 10.0 10 100 PHE840MK5220MK03R17 0.47 D14 8.0 16.0 26.0 1.6 100 PHE840MY6470MD14R06L2* 0.027 K03 5.0 11.0 10.0 9.5 100 PHE840MK5270MK03R17 0.47 D15 9.0 18.5 26.0 1.5 100 PHE840MD6470MD15R06L2 0.033 K03 5.0 11.0 10.0 8.8 100 PHE840MK5330MK03R17 0.56 D15 9.0 18.5 26.0 1.4 100 PHE840MD6560MD15R06L2 0.039 K03 5.0 11.0 10.0 8.3 100 PHE840MK5390MK03R17 0.68 D15 9.0 18.5 26.0 1.3 100 PHE840MY6680MD15R06L2* 0.047 K04 6.0 12.0 10.0 7.5 100 PHE840MK5470MK04R17 0.68 D18 10.5 19.0 26.0 1.2 100 PHE840MD6680MD18R06L2 0.82 D16 11.0 21.5 26.0 1.1 100 PHE840MD6820MD16R06L2 lEad sPacinG 10 mm 1.0 D16 11.0 21.5 26.0 1.1 100 PHE840MY7100MD16R06L2* 0.022 A01 4.0 9.0 13.0 8.5 100 PHE840MA5220MA01R17 1.0 D20 13.5 23.0 26.0 1.0 100 PHE840MD7100MD20R06L2 0.027 A01 4.0 9.0 13.0 8.0 100 PHE840MA5270MA01R17 1.2 D19 15.5 24.5 26.0 0.90 100 PHE840MD7120MD19R06L2 0.033 A01 4.0 9.0 13.0 7.6 100 PHE840MA5330MA01R17 1.5 D19 15.5 24.5 26.0 0.85 100 PHE840MD7150MD19R06L2 0.039 A02 4.5 10.5 13.0 6.7 100 PHE840MA5390MA02R17 lEad sPacinG 27.5 mm 0.047 A02 4.5 10.5 13.0 5.9 100 PHE840MA5470MA02R17 0.056 A03 5.0 11.0 13.0 5.5 100 PHE840MA5560MA03R17 0.82 F11 10.5 20.5 31.5 1.0 100 PHE840MF6820MF11R06L2 0.068 A03 5.0 11.0 13.0 4.9 100 PHE840MA5680MA03R17 1.0 F11 10.5 20.5 31.5 1.0 100 PHE840MZ7100MF11R06L2 * 0.082 A04 6.0 12.0 13.0 4.4 100 PHE840MA5820MA04R17 1.0 F12 11.5 22.5 31.5 0.95 100 PHE840MF7100MF12R06L2 0.10 A05 9.5 7.5 13.0 4.0 100 PHE840MP6100MA05R17 1.2 F03 13.5 23.0 31.5 0.82 100 PHE840MF7120MF03R06L2 0.10 A04 6.0 12.0 13.0 4.0 100 PHE840MA6100MA04R17 1.5 F13 14.5 24.5 31.5 0.73 100 PHE840MF7150MF13R06L2 1.8 F14 17.5 28.0 31.5 0.65 100 PHE840MF7180MF14R06L2 lEad sPacinG 15 mm 2.2 F14 17.5 28.0 31.5 0.64 100 PHE840MZ7220MF14R06L2 * 0.047 B04 5.5 10.5 18.0 5.0 100 PHE840MB5470MB04R17 2.2 F15 19.0 29.0 31.5 0.62 100 PHE840MF7220MF15R06L2 0.056 B04 5.5 10.5 18.0 4.6 100 PHE840MB5560MB04R17 2.7 F15 19.0 29.0 31.5 0.58 100 PHE840MF7270MF15R06L2 0.068 B04 5.5 10.5 18.0 4.2 100 PHE840MB5680MB04R17 3.3 F15 19.0 29.0 31.5 0.54 100 PHE840MZ7330MF15R06L2 * 0.082 B05 5.5 12.5 18.0 3.9 100 PHE840MB5820MB05R17 3.3 F16 21.0 30.0 31.5 0.50 100 PHE840MF7330MF16R06L2 0.10 B05 5.5 12.5 18.0 3.7 100 PHE840MB6100MB05R17 3.3 F18 31.0 19.0 31.5 0.50 100 PHE840MT7330MF18R06L2 0.12 B10 6.5 12.5 18.0 3.3 100 PHE840MB6120MB10R17 lEad sPacinG 37.5 mm 0.15 B10 6.5 12.5 18.0 2.8 100 PHE840MB6150MB10R17 0.18 B06 7.5 14.5 18.0 2.7 100 PHE840MB6180MB06R17 1.8 R05 13.0 24.0 41.0 0.60 100 PHE840MR7180MR05R06L2 0.22 B06 7.5 14.5 18.0 2.6 100 PHE840MX6220MB06R17* 2.2 R05 13.0 24.0 41.0 0.58 100 PHE840MR7220MR05R06L2 0.22 B17 13.0 12.5 18.0 2.5 100 PHE840MQ6220MB17R17 2.7 R04 15.0 26.0 41.0 0.53 100 PHE840MR7270MR04R06L2 0.22 B12 8.0 15.0 18.0 2.5 100 PHE840MB6220MB12R17 3.3 R04 15.0 26.0 41.0 0.49 100 PHE840MR7330MR04R06L2 0.27 B11 8.5 16.0 18.0 2.3 100 PHE840MB6270MB11R17 3.9 R02 16.5 32.0 41.0 0.46 100 PHE840MR7390MR02R06L2 0.33 B11 8.5 16.0 18.0 2.2 100 PHE840MX6330MB11R17* 4.7 R03 19.0 36.0 41.0 0.44 100 PHE840MR7470MR03R06L2 0.33 B17 13.0 12.5 18.0 2.2 100 PHE840MH6330MB17R17* 5.6 R06 21.0 38.0 41.0 0.41 100 PHE840MR7560MR06R06L2 0.33 B14 9.5 17.5 18.0 2.0 100 PHE840MB6330MB14R17 6.8 R06 21.0 38.0 41.0 0.39 100 PHE840MR7680MR06R06L2 0.39 B16 11.0 19.0 18.0 1.9 100 PHE840MB6390MB16R17 8.2 R08 28.0 43.0 41.0 0.30 100 PHE840MR7820MR08R06L2 0.47 B16 11.0 19.0 18.0 1.8 100 PHE840MB6470MB16R17 10.0 R08 28.0 43.0 41.0 0.26 100 PHE840MR8100MR08R06L2 *Only ± 20% tolerance appRoVaLs maRKing certification Body specification • RIFA • RIFA article code ENEC EN/IEC 60384-14:2005 • Rated capacitance • Capacitance tolerance code UL UL 60384-14 (UR = 280 VAC) • Rated voltage • X2 CAN/CSA-E60384-14:09 (UR = 280 VAC) • Approval marks • Manufacturing date code • IEC climatic category • Passive flammability class oRdERing inFoRmation The article code for the standard part is given in the article table. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.