PESD2CAN CAN bus ESD protection diode Rev. 2 — 27 September 2012 Product data sheet 1. Product profile 1.1 General description PESD2CAN in a small SOT23 Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by ElectroStatic Discharge (ESD) and other transients. 1.2 Features and benefits  Max. peak pulse power: P =230W at t =8/20s PP p  Low clamping voltage: V =41V at I =5A CL PP  Ultra low leakage current: I <1nA RM  ESD protection up to 30kV  IEC61000-4-2, level4 (ESD)  IEC61000-4-5 (surge); I =5A at t =8/20s PP p  AEC-Q101 qualified 1.3 Applications  CAN bus protection  Automotive applications 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit Per diode V reverse standoff voltage - - 24 V RWM C diode capacitance f=1MHz; V =0V - 25 30 pF d R 2. Pinning information Table 2. Pinning Pin Description Simplified outline Graphic symbol 1 cathode1 3 2 cathode2 1 3 common cathode 3 2 1 2 006aaa155

PESD2CAN Nexperia CAN bus ESD protection diode 3. Ordering information Table 3. Ordering information Type number Package Name Description Version PESD2CAN - plastic surface-mounted package; 3leads SOT23 4. Marking Table 4. Marking codes Type number Marking code[1] PESD2CAN 6R* [1] * = placeholder for manufacturing site code. 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Per diode P peak pulse power t =8/20s [1][2] - 230 W PP p I peak pulse current t =8/20s [1][2] - 5 A PP p Per device T junction temperature - 150 C j T ambient temperature 55 +150 C amb T storage temperature 65 +150 C stg [1] Non-repetitive current pulse 8/20s exponential decay waveform according to IEC61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3. T able 6. ESD maximum ratings Symbol Parameter Conditions Min Max Unit Per diode V electrostatic discharge voltage IEC61000-4-2 [1][2] - 30 kV ESD (contactdischarge) machine model [2] - 400 V MIL-STD-883 (human [1][2] - 16 kV body model) [1] Device stressed with ten non-repetitive ESD pulses. [2] Measured from pin 1 to 3 or 2 to 3. PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 2 of 13

PESD2CAN Nexperia CAN bus ESD protection diode Table 7. ESD standards compliance Standard Conditions Per diode IEC61000-4-2; level4 (ESD) >15kV (air); >8kV (contact) MIL-STD-883; class3B (human body model) >8kV 001aaa631 001aaa630 IPP 120 100 % IPP 100 % IPP; 8 μs 90 % (%) 80 e−t 50 % IPP; 20 μs 40 10 % tr = 0.7 ns to 1 ns t 0 0 10 20 30 40 30 ns t (μs) 60 ns Fig 1. 8/20s pulse waveform according to Fig 2. ESD pulse waveform according to IEC61000-4-5 IEC61000-4-2 PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 3 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 6. Characteristics Table 8. Characteristics T =25C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit Per diode V reverse standoff voltage - - 24 V RWM I reverse leakage current V =24V - <1 10 nA RM RWM V breakdown voltage I =1mA 26.2 28 30.3 V BR R C diode capacitance f=1MHz; V =0V - 25 30 pF d R V clamping voltage I =1A [1][2] - - 34 V CL PP I =5A [1][2] - - 41 V PP r differential resistance I =1mA - - 300  dif R [1] Non-repetitive current pulse 8/20s exponential decay waveform according to IEC61000-4-5. [2] Measured from pin 1 to 3 or 2 to 3. 006aaa937 001aaa193 8.0 1.2 I(PAP) PPP PPP(25°C) 6.0 0.8 4.0 0.4 2.0 0 0 25 30 35 40 45 0 50 100 150 200 VCL (V) Tj (°C) Tamb=25C Fig 3. Peak pulse current as a function of clamping Fig 4. Relative variation of peak pulse power as a voltage; typical values function of junction temperature; typical values PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 4 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 006aaa938 006aaa939 30 50 Cd IR (pF) (mA) (1) (2) (3) 26 40 22 (1) 30 (2) (3) 18 20 (4) (5) 14 10 10 0 0 8 16 24 24 26 28 30 32 34 VR (V) VR (V) f=1MHz (1) Tamb=55C (1) Tamb=150C (2) Tamb=25C (2) Tamb=125C (3) Tamb=150C (3) Tamb=85C (4) Tamb=25C (5) Tamb=40C Fig 5. Diode capacitance as a function of reverse Fig 6. Reverse current as a function of reverse voltage; typical values voltage; typical values 006aaa940 25 IPP VR (V) 20 15 IR −VCL−VBR −VRWM IRM −IRM VRWM VBR VCL 10 −IR 5 − + 00 10 20 30 −IPP IRM (nA) 006aaa676 Tamb=150C IR is less than 1nA at 55C and 25C. Fig 7. Reverse voltage as a function of reverse Fig 8. V-Icharacteristics for a bidirectional ESD leakage current; typical values protection diode PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 5 of 13

PESD2CAN Nexperia CAN bus ESD protection diode ESD TESTER 4 GHz DIGITAL RG 223/U OSCILLOSCOPE RZ 450 Ω 50 Ω coax 10× ATTENUATOR CZ 50 Ω D.U.T. (Device IEC 61000-4-2 network Under CZ = 150 pF; RZ = 330 Ω Test) vertical scale = 10 A/div vertical scale = 25 V/div horizontal scale = 15 ns/div horizontal scale = 100 ns/div unclamped +8 kV ESD pulse waveform clamped +8 kV ESD pulse waveform (IEC 61000-4-2 network) (IEC 61000-4-2 network), Pin 1 to 3 vertical scale = 10 A/div horizontal scale = 15 ns/div vertical scale = 25 V/div horizontal scale = 100 ns/div unclamped −8 kV ESD pulse waveform clamped −8 kV ESD voltage waveform (IEC 61000-4-2 network) (IEC 61000-4-2 network), Pin 1 to 3 006aaa941 Fig 9. ESD clamping test setup and waveforms PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 6 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 7. Application information The PESD2CAN is designed for the protection of two automotive CAN bus lines from the damage caused by ESD and surge pulses. The PESD2CAN can be used for both, high-speed CAN bus and fault-tolerant CAN bus protection. The PESD2CAN provides a surge capability of up to 230W per line for an 8/20s waveform. SPLIT CANH CAN BUS RT/2 TRANSCEIVER CAN bus RT/2 CANL Common 2 1 mode choke (optional) CG PESD2CAN 3 006aaa942 Fig 10. Typical application: ESD protection of two automotive CAN bus lines Circuit board layout and protection device placement: Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESD2CAN as close to the input terminal or connector as possible. 2. Minimize the path length between the PESD2CAN and the protected line. 3. Keep parallel signal paths to a minimum. 4. Avoid running protection conductors in parallel with unprotected conductors. 5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Use ground planes whenever possible. For multilayer PCBs, use ground vias. 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 7 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 9. Package outline 3.0 1.1 2.8 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 0.48 0.15 0.38 0.09 1.9 Dimensions in mm 04-11-04 Fig 11. Package outline SOT23 (TO-236AB) 10. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 3000 10000 PESD2CAN SOT23 4mm pitch, 8mm tape and reel -215 -235 [1] For further information and the availability of packing methods, see Section14. PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 8 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 11. Soldering 3.3 2.9 1.9 solder lands solder resist 3 1.7 2 solder paste 0.7 0.6 occupied area (3×) (3×) Dimensions in mm 0.5 (3×) 0.6 (3×) 1 sot023_fr Fig 12. Reflow soldering footprint SOT23 (TO-236AB) 2.2 1.2 (2×) 1.4 (2×) solder lands 4.6 2.6 solder resist occupied area Dimensions in mm 1.4 preferred transport direction during soldering 2.8 4.5 sot023_fw Fig 13. Wave soldering footprint SOT23 (TO-236AB) PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 9 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 12. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PESD2CAN v.2 20120927 Productdatasheet - PESD2CAN v.1 Modifications: • Section 1.2 “Features and benefits”: updated • Table 6 “ESD maximum ratings”: corrected T minimum value amb • Table 7 “ESD standards compliance”: updated • Section 8 “Test information”: added • Section 11 “Soldering”: added • Section 13 “Legal information”: updated PESD2CAN v.1 20061222 Productdatasheet - - PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 10 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URLhttp://www.nexperia.com. 13.2 Definitions Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, Draft — The document is a draft version only. The content is still under authorized or warranted to be suitable for use in life support, life-critical or internal review and subject to formal approval, which may result in safety-critical systems or equipment, nor in applications where failure or modifications or additions. Nexperia does not give any malfunction of a Nexperia product can reasonably be expected representations or warranties as to the accuracy or completeness of to result in personal injury, death or severe property or environmental information included herein and shall have no liability for the consequences of damage. Nexperia and its suppliers accept no liability for use of such information. inclusion and/or use of Nexperia products in such equipment or Short data sheet — A short data sheet is an extract from a full data sheet applications and therefore such inclusion and/or use is at the customer's own with the same product type number(s) and title. A short data sheet is intended risk. for quick reference only and should not be relied upon to contain detailed and Applications — Applications that are described herein for any of these full information. For detailed and full information see the relevant full data products are for illustrative purposes only. Nexperia makes no sheet, which is available on request via the local Nexperia sales representation or warranty that such applications will be suitable for the office. In case of any inconsistency or conflict with the short data sheet, the specified use without further testing or modification. full data sheet shall prevail. Customers are responsible for the design and operation of their applications Product specification — The information and data provided in a Product and products using Nexperia products, and Nexperia data sheet shall define the specification of the product as agreed between accepts no liability for any assistance with applications or customer product Nexperia and its customer, unless Nexperia and design. It is customer’s sole responsibility to determine whether the Nexperia customer have explicitly agreed otherwise in writing. In no event however, product is suitable and fit for the customer’s applications and shall an agreement be valid in which the Nexperia product is products planned, as well as for the planned application and use of deemed to offer functions and qualities beyond those described in the customer’s third party customer(s). Customers should provide appropriate Product data sheet. design and operating safeguards to minimize the risks associated with their applications and products. 13.3 Disclaimers Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s Limited warranty and liability — Information in this document is believed to third party customer(s). Customer is responsible for doing all necessary be accurate and reliable. However, Nexperia does not give any testing for the customer’s applications and products using Nexperia representations or warranties, expressed or implied, as to the accuracy or products in order to avoid a default of the applications and completeness of such information and shall have no liability for the the products or of the application or use by customer’s third party consequences of use of such information. Nexperia takes no customer(s). Nexperia does not accept any liability in this respect. responsibility for the content in this document if provided by an information source outside of Nexperia. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC60134) will cause permanent In no event shall Nexperia be liable for any indirect, incidental, damage to the device. Limiting values are stress ratings only and (proper) punitive, special or consequential damages (including - without limitation - lost operation of the device at these or any other conditions above those given in profits, lost savings, business interruption, costs related to the removal or the Recommended operating conditions section (if present) or the replacement of any products or rework charges) whether or not such Characteristics sections of this document is not warranted. Constant or damages are based on tort (including negligence), warranty, breach of repeated exposure to limiting values will permanently and irreversibly affect contract or any other legal theory. the quality and reliability of the device. Notwithstanding any damages that customer might incur for any reason Terms and conditions of commercial sale — Nexperia whatsoever, Nexperia’s aggregate and cumulative liability towards products are sold subject to the general terms and conditions of commercial customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual Right to make changes — Nexperia reserves the right to make agreement is concluded only the terms and conditions of the respective changes to information published in this document, including without agreement shall apply. Nexperia hereby expressly objects to limitation specifications and product descriptions, at any time and without applying the customer’s general terms and conditions with regard to the notice. This document supersedes and replaces all information supplied prior purchase of Nexperia products by customer. to the publication hereof. PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 11 of 13

PESD2CAN Nexperia CAN bus ESD protection diode No offer to sell or license — Nothing in this document may be interpreted or Quick reference data — The Quick reference data is an extract of the construed as an offer to sell products that is open for acceptance or the grant, product data given in the Limiting values and Characteristics sections of this conveyance or implication of any license under any copyrights, patents or document, and as such is not complete, exhaustive or legally binding. other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein 13.4 Trademarks may be subject to export control regulations. Export might require a prior authorization from competent authorities. Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com PESD2CAN All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 — 27 September 2012 12 of 13

PESD2CAN Nexperia CAN bus ESD protection diode 15. Contents 1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 General description . . . . . . . . . . . . . . . . . . . . . 1 1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1 1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2 4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 Application information. . . . . . . . . . . . . . . . . . . 7 8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 7 8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 7 9 Package outline. . . . . . . . . . . . . . . . . . . . . . . . . 8 10 Packing information . . . . . . . . . . . . . . . . . . . . . 8 11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10 13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 14 Contact information. . . . . . . . . . . . . . . . . . . . . 12 15 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 27 September 2012