PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS  ESD protection for high frequency applications  Smaller form factor for board space savings  Helps protect electronic circuits against damage from electrostatic discharge (ESD) events  Assists equipment to pass IEC 61000-4-2, level 4 testing FEATURES  0.25 pF (typ) Capacitance  Low leakage current  Low clamping voltage  Fast response time (<1ns)  Capable of withstanding numerous ESD strikes  Compatible with standard reflow installation procedures  Thick film technology  Bi-directional protection APPLICATIONS Cellular phones CAUTION: This device should not be used in Power Bus applications MATERIALS INFORMATION RoHS Compliant ELV Compliant Halogen Free* Lead Free HF PART NUMBERING PESD 1206 Q - 240 Series Operating Voltage Designator 24 x 100 = 24V DC EIA Size Q: Array of 4 elements * Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 2 OF 9 TYPICAL DEVICE RATINGS AND CHARACTERISTICS Continuous Typical TLP Typical Typical Max Typical TLP Max Clamping Capacitance2, Leakage Leakage Trigger Operating Voltage1 after @ 1 MHz, Current Current Voltage1 Voltage 30ns 1Vrms @24VDC @24VDC Symbol V V V Cp I I DC T(TLP) C(TLP 30) L(Typ) L(MAX) Unit V V V pF μA μA Value 24 250 45 0.25 <0.01 10.0 Note 1: TLP test method @ 1000V (refer to Fig. 5 on page 5) Note 2: Typical capacitance @ 0V and 24V bias GENERAL CHARACTERISTICS Operating temperature: -55°C to +125°C Storage temperature: -55°C to +125°C ESD voltage capability (tested per IEC 61000-4-2) o Contact discharge mode: 8kV (typ), 15kV (max) o Air discharge mode: 15kV (typ), 25kV (max) [1 pulse: per customer request] ESD pulse withstand: Typically 100 pulses (tested per IEC 61000-4-2, level 4, and contact method) Environmental Specifications Solve Bias Humidity Bias Heat Bias Low Mechanical nt Thermal Shock Solderability Solder Heat Vibration Test Test Temp Test Shock Resist ance @ 85oC 10 to 50Hz, IPA -55oC to 125oC @ 125oC @ -55oC 250 oC +/- 5 oC 1500G, 0.5ms, Test @ 85% RH 60s cycle, 2hrs ultras 30min dwell V (max) V (max) 3s +/- 1s 260 oC, 10s X-Y-Z axis Conditions V (max) DC DC each in X-Y-Z onic DC 1000 cycles 1000 hours 1000 hours 3 times 1000 hours axis 300s No Physic Pass/Fail 90% No Physical No Physical al Criteria IL≤10µA IL≤10µA IL≤10µA IL≤10µA 95% coverage coverage Damage Damage D a mag IL ≤ 10 μA IL ≤ 10 μA e IL ≤ 10 μA © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 3 OF 9 FIG 1: CAPACITANCE VS. FREQUENCY (TYPICAL SAMPLE) (PESD1206Q Flat Response of Capacitance over Frequency Range) FIG 2: EYE DIAGRAM (TYPICAL SAMPLE) (PESD1206Q Eye Diagram Performance at 3.4 GHz) © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 4 OF 9 FIG 3: INSERTION LOSS DIAGRAM (TYPICAL SAMPLE) (PESD1206Q Minimal Insertion Loss at 3.4 GHz) -0.25dB at 3.4GHz FIG 4: ESD PROTECTION FOR HDMI 1206Q Arrays © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 5 OF 9 FIG 5: TYPICAL TRANSMISSION LINE PULSE RESPONSE GRAPH Typical TLP Clamping Voltage 300 250 200 V ) ge ( 150 a olt V 100 50 0 0 10 20 30 40 50 60 70 80 90 100 Time (ns) © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 6 OF 9 DIMENSIONS D A B F E C Drawing Not To Scale Length A Height B End Terminal Width C Length Width D Length Width E Length Width F Min Max Min Max Min Max Min Max Min Max Min Max mm: 3.1 3.3 0.4 0.6 0.1 0.3 1.5 1.7 0.2 0.6 0.2 0.6 in*: (0.122) (0.130) (0.016) (0.024) (0.004) (0.012) (0.059) (0.067) (0.008) (0.024) (0.008) (0.024) * Round off approximation RECOMMENDED LAND PATTERN: Solder thickness 0.15 to 0.2 mm V Z W X Y V W X Y Z Typ Typ Typ Typ Typ mm: 3.2 2.2 0.5 0.8 1.0 in*: (0.126) (0.087) (0.020) (0.031) (0.039) * Round off approximation © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 7 OF 9 SOLDER REFLOW RECOMMENDATIONS: From ambient to Temperature A Preheating 30s to 60s ramp up 1 temperature B Preheating 140°C - 160°C 60s to 120s From Preheating to Temperature C Main heating 20s to 40s ramp up 2 temperature at 200°C 60s ~ 70s D Main at 220°C 50s ~ 60s heating at 240°C 30s ~ 40s at 260°C 5s ~ 10s From main heating E Cooling max 4°C/s temperature to 100°C © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 8 OF 9 PACKAGING Packaging Tape & Reel Standard Box PESD1206Q-240 5,000 25,000 EIA referenced Reel Dimensions for PESD Devices Reel Dimensions (mm): A B C D E F G 1206 Devices 178.0 ±2.0 2.0 ±0.5 13.0±0.5 21.0±0.8 62.0±1.5 9.0±0.5 13.0±1.0 Carrier Dimensions (mm): A B C D E F L W T1 1206 Devices 8.0±0.3 3.5±0.05 1.75±0.1 2.0±0.05 4.0±0.1 1.5±0.1 3.62±0.20 2.02±0.20 0.75±0.05 Note 1: Carrier thickness Product Orientation – always face up (meaning the substrate is at the bottom), but parts do not have polarity mark. © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016

PRODUCT : PESD1206Q-240 ESD Protector DOCUMENT : SCD27553 Overvoltage Protection Device REV LETTER : F REV DATE: JULY 26, 2016 PAGE NO.: 9 OF 9 POST REFLOW, CLEANING CONDITIONS A 5% saponifier combined with water during wash. For the ultrasonic process water temperature should be at 50°C and board should be submerged for a minimum of one minute in the solutions, then rinse and dry. For in-line washing, the temperature of the water sprayed should be at 110°C, rinse and drying is done in-line. Warning: Application Limitations for PESD1206Q-240. This part is not intended to be used on power lines or for power bus applications. Users should independently evaluate the suitability of and test each product selected for their own applications Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. © 2016 Littelfuse, Inc. littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016