Product Specification PE42742 75 Ω Terminated, 5 - 2200 MHz SPDT CATV UltraCMOS™ Switch Product Description Featuring Unpowered Operation The PE42742 is an SPDT UltraCMOS™ switch designed Features for broadband applications such as CATV, DTV, Multi-  Meets FCC 15.115 spec of 80 dB Tuner DVR (Digital Video Recorder), Set-top Box, PCTV isolation @ 216 MHz and Game Boxes. It meets FCC 15.115 spec of 80 dB isolation @ 216 MHz and offers high isolation and low  Unpowered operational state insertion loss in both a powered and a unique unpowered  3500 V HBM ESD tolerance, all pins default state. The PE42742 covers a broad frequency  CTB performance of 90 dBc range from 5 MHz to beyond 2200 MHz with a single positive supply and CMOS control. It provides a smaller,  High isolation: 63 dB @ 1000 MHz cost effective, more reliable and manufacturable  Low insertion loss: typically 0.5 dB @ alternative to mechanical relays in set-top box 5 MHz, 0.8 dB @ 1000 MHz applications.  CMOS single-pin control with logic The PE42742 is manufactured on Peregrine’s select UltraCMOS™ process, a patented variation of silicon-on-  Single +3 volt supply operation insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and  Low current consumption: 8 μA integration of conventional CMOS. Figure 1. Functional Diagram Figure 2. Package Type 20-lead 4x4mm QFN RFC RF1 RF2 ESD ESD 75 CMOS 75 Control Driver C1 C2 71-0040-01 Document No. 70-0203-07 │ www.psemi.com ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Table 1. Electrical Specifications @ +25°C, V = +3V (Z = Z = 75 Ω) DD S L Parameter Condition Minimum Typical Maximum Units Operating Frequency 5 2200 MHz 220 MHz 0.45 0.55 dB 550 MHz 0.55 0.65 dB RF1-RFC Insertion Loss 810 MHz 0.7 0.8 dB 1000 MHz 0.75 0.85 dB 2200 MHz 1.7 1.8 dB 220 MHz 0.7 0.8 dB 550 MHz 0.8 0.9 dB RF2-RFC Insertion Loss 810 MHz 0.9 1 dB 1000 MHz 1.0 1.1 dB 2200 MHz 1.8 1.9 dB 220 MHz 81 94 dB 550 MHz 77 82 dB Isolation RF1 to RF2 (RFC-RF1 ON) 810 MHz 71.5 76 dB 2200 MHz 50 53.6 dB 220 MHz 81 92 dB 550 MHz 75 79 dB Isolation RF1 to RF2 (RFC-RF2 ON) 810 MHz 70.5 75 dB 2200 MHz 50 53 dB 220 MHz 71 74 dB 550 MHz 64 66 dB Isolation RF1 to RFC (RFC-RF2 ON) 810 MHz 62 64 dB 2200 MHz 52 57 dB 220 MHz 70.5 73 dB 550 MHz 64 66 dB Isolation RF2 to RFC (RFC-RF1 ON) 810 MHz 61.5 63 dB 2200 MHz 51 55 dB IP2 RF1/RF22 5 MHz – 1000 MHz 90/90 dBm IIP3 RF1/RF22 5 MHz – 1000 MHz 53/53 dBm Input 1 dB Compression RF1/RF22 1000 MHz 30/24.5 32/26.5 dBm (CPToBw e/ rCeSdO/Unpowered) 7P7o w&e 1r 1O0u ct h=a 4n4n edlsB;mV -90 / -77 dBc Switching time 50 % CTRL to 10 / 90 RF 3 µs Video Feedthrough3 5 MHz – 1000 MHz 20 mVpp Table 2. Electrical Characterization (Unpowered Operation)5 Parameter Condition Minimum Typical Maximum Units Operating Frequency1 5 2200 MHz 220 MHz 81 90.5 - dB 550 MHz 77 81.5 - dB Isolation RF1 to RF24 810 MHz 70.5 77 - dB 2200 MHz 49 52.5 - dB Notes: 1. Device linearity will begin to degrade with input signals below 5 MHz 2. Measured in a 50 Ω system 3. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth 4. Minimum per FCC 15.115 spec 5. See Figure 9 for Power-Off insertion loss of RFC-RF1 ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 │ UltraCMOS™ RFIC Solutions Page 2 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Figure 3. Pin Configuration (Top View) Table 4. Operating Conditions @ 25°C D D D Parameter Min Typ Max Unit VD GN GN C1 C2 V Power Supply 2.7 3.0 3.3 V 0 9 8 7 6 DD 2 1 1 1 1 IDD Power Supply Current 8 μA (V = 3V, V = 3V) GND 1 15 GND DD CNTL GND GND 2 14 GND Control Voltage High 0.7 x VDD VDD V RF1 3 13 RF2 Control Voltage Low 0 0.3 x VDD V GND 4 75 75 12 GND Table 5. Absolute Maximum Ratings GND 5 11 GND Symbol Parameter/Condition Min Max Unit 6 7 8 9 10 VDD Power supply voltage -0.3 4.0 V GND GND RFC GND GND VI Voltage on any DC input -0.3 V0D.D3 + V Table 3. Pin Descriptions PRF RTeFr mpoinwaeter do/nT hRrFoCug, hR F1, RF2 24/33 dBm T Storage temperature -65 +150 °C No. Name Description ST T Operating temperature -40 +85 °C OP 1, 2, 4-7, 9-12, 14, 15, 18, 19 GND RF Ground HBM1 ESD Voltage RF Pins 3500 3 RF11 RF I/O VESD HBM1 ESD Voltage Digital Pins 3500 V 8 RFC1 RF Common MM2 ESD Voltage all pins 150 13 RF21 RF I/O N otes: 21.. JMELD_ESCTD J E8S83D 2M2e-Ath1o1d4 3-B0 15.7 16 C22 Control 2 (or logic select) Exceeding absolute maximum ratings may cause 17 C12 Control 1 (or logic select) permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation 20 VDD Supply between operating range maximum and absolute Pad GND RF Ground Pad maximum for extended periods may reduce reliability. Notes: 1. RF pins 3, 8, and 13 must be at 0 VDC. The RF pins do not require DC Electrostatic Discharge (ESD) Precautions blocking capacitors for proper operation if the 0V DC requirement is met. 2. Pins 16 and 17 can be set for single pin or complementary When handling this UltraCMOS™ device, observe the pin control. same precautions that you would use with other ESD- sensitive devices. Although this device contains Moisture Sensitivity Level circuitry to protect it from damage due to ESD, The Moisture Sensitivity Level rating for the PE42742 in precautions should be taken to avoid exceeding the the 20-lead QFN package is MSL1. rating specified. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS™ devices are immune to latch-up. Switching Frequency The PE42742 has a maximum 25 kHz switching rate. Document No. 70-0203-07 │ www.psemi.com ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Table 6. Truth Table Typical Applications V C1 (pin 17) C2 (pin 16) RFC – RF1 RFC – RF2 The PE42742 provides the high isolation required DD by FCC part 15.115 regulation between the OFF Low Low ON OFF television antenna and the cable plant. The ON Low Low ON OFF advantage of the PE42742 is that device ON Low High OFF ON isolation / thru performance is maintained when power is removed. This unique feature makes the ON High Low OFF ON PE42742 ideal for set-top box and VCR ON High High ON OFF applications. The PE42742 supports signal flow from RFC to RF1 and RF2 termination in the Note: A versatile logic table has been established to allow either C1 or C2 act as a single pin control and in either polarity. unpowered state; similar to the powered state with C1=C2 (both high or low). Figure 4. Typical Application (1 of 4) Antenna Input 80dB 54 – 216MHz PE42742 60dB 216 – 550MHz SPDT DTV-Tuner 55dB 550 – 806MHz CATV Input Figure 5. Typical Application (2 of 4) TV Set / Cable Set-top Box PE42742 SPDT Tuner CATV Input 75Ω OFF – Terminated Figure 6. Typical Application (3 of 4) Dual Tuner DTV / DVR / Set-top Box Antenna Input Power PE42742 DTV Tuner Splitter SPDT 80dB 54 – 216MHz 60dB 216 – 550MHz 55dB 550 – 806MHz Power PE42742 DTV-Tuner CATV Input Splitter SPDT Figure 7. Typical Application (4 of 4) PVR/VCR/Game Box RF PE42742 SPDT Television Splitter Antenna/C able Tuner/ Input Modulator OFF – Pass Through ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 │ UltraCMOS™ RFIC Solutions Page 4 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Typical Performance Data @ 25°C, 75 Ω Figure 8. Insertion Loss – Power On Figure 9. Insertion Loss – Power Off Figure 10. Isolation - Power On Figure 11. Isolation - Power Off Document No. 70-0203-07 │ www.psemi.com ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Typical Performance Data @ 25°C, 75 Ω Figure 12. Isolation: RF2 – Power On Figure 13. Return Loss: RF1 Figure 14. Return Loss: RF2 Figure 15. Return Loss: RFC ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 │ UltraCMOS™ RFIC Solutions Page 6 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Typical Performance Data @ 25°C, 75 Ω Figure 16. Input IP3: RFC-RF1/RF2 Figure 17. P_1dB Compression: RFC-RF1/RF2 70 40 60 35 30 50 m) m) 25 dB 40 B P3 ( B (d 20 ut I 30 1d 15 p _ n P I 20 10 RF1 RF1 10 5 RF2 RF2 0 0 0 500 1000 1500 2000 2500 0 500 1000 1500 2000 2500 Frquency (MHz) Frequency (dBm) Document No. 70-0203-07 │ www.psemi.com ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Evaluation Kit Figure 18. Evaluation Board Layouts Peregrine Specification 101/0269 The SPDT Switch Evaluation Kit facilitates customer evaluation of the PE42742 SPDT switch. The RF common port is connected through a 75 Ω transmission line to J2. Ports 1 and 2 are connected through 75 Ω transmission lines to J1 and J3. A through line connects F connectors J4 and J5. This transmission line can be used to estimate the PCB loss over the environmental conditions. J6 provides DC and digital inputs to the device. The board is composed of a two metal layer FR4 material with a total thickness of 0.032”. The transmission lines are hybrid microstrip/coplanar waveguide with ground plane (28 mil core, 12 mil width, 12 mil gap). The provided jumpers short the control pins to ground for logic low. With the jumper removed the control input rises to V for logic high through the DD 1 MΩ pull up resistor. These resistors will draw several microamps from V They are not DD. required for normal operation. Figure 19. Evaluation Board Schematic Peregrine Specification 102/0352 ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 │ UltraCMOS™ RFIC Solutions Page 8 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Figure 20. Package Drawing 4x4 mm 20-lead QFN, BOM 19/0106 Note: PE42742 uses the SLP dimensions. Figure 21. Marking Specification 42742 YYWW = Date Code (Year, Work Week) ZZZZZ = Last five digits of PSC Lot Number YYWW ZZZZZ Document No. 70-0203-07 │ www.psemi.com ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42742 Product Specification Figure 22. Tape and Reel Drawing Tape Feed Direction Pin 1 A0 = 4.35 Top of B = 4.35 Device 0 K = 1.1 0 Device Orientation in Tape Table 7. Ordering Information Order Code Part Marking Description Package Shipping Method PE42742MLIBB 42742 PE42742G-20 QFN 4x4mm-cut off tape and reel Green 20-lead 4x4mm QFN Cut tape or loose PE42742MLIBB-Z 42742 PE42742G-20 QFN 4x4mm-3000C Green 20-lead 4x4mm QFN 3000 units / T&R EK42742-03 PE42742-EK PE42742-20 QFN 4x4mm-EK Evaluation Kit 1 / Box Sales Contact and Information For Sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains design target No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. specifications for product development. Specifications and features may change in any manner without notice. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later or in other applications intended to support or sustain life, or in any application in which the failure of the date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to liability for damages, including consequential or incidental damages, arising out of the use of its products in change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer such applications. Notification Form). The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS, HaRP, MultiSwitch and DuNE The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use are trademarks of Peregrine Semiconductor Corp. of this information. Use shall be entirely at the user’s own risk. ©2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 │ UltraCMOS™ RFIC Solutions Page 10 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com