Product Specification PE42440 SP4T UltraCMOS® RF Switch Product Description 50 – 3000 MHz Features The PE42440 is a HaRP™-enhanced SP4T RF switch developed on the UltraCMOS® process • HaRPTM - Enhanced Technology for technology. This general-purpose switch contains 4 Unparalleled Linearity identical RF ports and can be used in a multitude of • Very Low Insertion Loss: 0.45 dB @ applications up to 3000 MHz. It integrates on-board 1000 MHz, 0.5 dB @ 2000 MHz CMOS control logic with a low voltage CMOS- • Very High Isolation: 34 dB @ compatible control interface and requires no DC 1000 MHz, 28 dB @ 2000 MHz blocking capacitors. This RoHS-compliant part is available in a standard 3 x 3 x 0.75 mm QFN package. • Exceptionally High ESD tolerance: • Class 3 (4.0 kV HBM) on RFC pin Peregrine’s HaRP™ technology enhancements deliver • Class 2 (2.0 kV HBM) on all pins high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOS® process, • Integrated Decoder for 2-pin control providing performance superior to GaAs with the • Accepts 1.8V and 2.75V Control economy and integration of conventional CMOS. Logic Levels • Low 4.5Ω Series ON Resistance • No Blocking Capacitors Required Figure 1. Functional Diagram Figure 2. Package Type 16L 3 x 3 x 0.75 mm QFN RFC E S D RF3 RF1 ESD ESD RF4 RF2 ESD ESD CMOS Control/Driver and ESD CTRL CTRL Vdd 71-0019-01 Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Table 1. Electrical Specifications: Temp = 25°C, V = 2.75V(Z = Z = 50Ω ) DD S L Parameter Condition Min Typ Max Units Operational Frequency 50 3000 MHz 50 - 1000 MHz - 0.45 0.65 dB Insertion Loss (RFC - RFX) 1000 - 2000 MHz - 0.5 0.7 dB 2000 - 3000 MHz - 0.85 1.15 dB 50 - 1000 MHz - 22 - dB Return Loss (RFC - RFX, Active Ports) 1000 - 2000 MHz - 15 - dB 2000 - 3000 MHz - 11 - dB 50 - 1000 MHz 31 34 - dB Isolation (RFC - RFX) 1000 - 2000 MHz 25 28 - dB 2000 - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 96 dBm Input IP3 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 67 dBm P1dB1 50 - 3000 MHz 41.5 dBm Switching time 50% CNTL to 10/90% of RF 2 µs Note: 1. Please refer to Maximum Operating Pin (50Ω) in Table 4 Table 2. Electrical Specifications, Worst Case Conditions: Temp = 85°C, V = 2.65V(Z = Z = 50Ω ) DD S L Parameter Condition Min Typ Max Units Operational Frequency 50 3000 MHz 50 - 1000 MHz - 0.5 0.65 dB Insertion Loss (RFC - RFX) 1000 - 2000 MHz - 0.65 0.75 dB 2000 - 3000 MHz - 1.0 1.25 dB 50 - 1000 MHz - 21 - dB Return Loss (RFC - RFX, Active Ports) 1000 - 2000 MHz - 15 - dB 2000 - 3000 MHz - 10 - dB 50 - 1000 MHz 30 32 - dB Isolation (RFC - RFX) 1000 - 2000 MHz 24 26 - dB 2000 - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 95 dBm Input IP3 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 66 dBm P1dB1 50 - 3000 MHz 41 dBm Switching time 50% CNTL to 10/90% of RF 2 µs Note: 1. Please refer to Maximum Operating Pin (50Ω) in Table 4 ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 2 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Figure 3. Pin Configuration (Top View) Table 5. Absolute Maximum Ratings Pin 1 N/C RF2 GND RF1 Symbol Parameter/Conditions Min Max Units V Power supply voltage -0.3 4.0 V DD 16 15 14 13 V Voltage on any DC input -0.3 V + 0.3 V I DD GND 1 12 GND RF input power VDD 2 EGxrpoousnedd 11 RFC PIN (50Ω)1 (50 - 500 MHz) +28 dBm (500 - 3000 MHz) +33 dBm V2 3 Paddle 10 GND HBM2 ESD Voltage, RFC pin 4000 V V1 4 9 GND HBM2 ESD Voltage, all pins 2000 V 5 6 7 8 V ESD D 4 D 3 MM ESD Voltage, RFC pin 300 V N F N F G R G R MM ESD Voltage, all pins 100 V Table 3. Pin Descriptions Notes: 1. VDD within operating range specified in Table 4 Pin No. Pin Name Description 2. ESD Voltage (HBM, MIL-STD-883 Method 3015.7) 1 GND Ground Exceeding absolute maximum ratings may cause 2 V Supply DD permanent damage. Operation between operating 3 V2 Switch control input, CMOS logic level range maximum and absolute maximum for extended 4 V1 Switch control input, CMOS logic level periods may reduce reliability. 5 GND Ground 6 RF41 RF Port 4 Table 6. Truth Table 7 GND Ground 8 RF31 RF Port 3 Path V2 V1 9 GND Ground RFC – RF1 0 0 10 GND Ground RFC – RF2 1 0 11 RFC1 RF Common RFC – RF3 0 1 12 GND Ground RFC – RF4 1 1 13 RF11 RF Port 1 Electrostatic Discharge (ESD) Precautions 14 GND Ground 15 RF21 RF Port 2 When handling this UltraCMOS® device, observe the 16 N/C No Connect same precautions that you would use with other ESD- Paddle GND Exposed ground paddle sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, Notes: 1. All RF pins must be DC blocked with an external series capacitor or held at 0 VDC precautions should be taken to avoid exceeding the specified rating. Table 4. Operating Ranges4 Latch-Up Avoidance Parameter Symbol Min Typ Max Units Unlike conventional CMOS devices, UltraCMOS® VDD Supply Voltage VDD 2.65 2.75 3.3 V devices are immune to latch-up. I Power Supply Current DD I 13 50 µA (V = 2.75V) DD DD Moisture Sensitivity Level RF input power (50Ω) (50 - 500 MHz) P +28 dBm IN (500 - 3000 MHz) +33 dBm The Moisture Sensitivity Level rating for the PE42440 in Control Voltage High V 1.4 V the 16-lead 3 x 3 x 0.75 mm QFN package is MSL1. IH Control Voltage Low V 0.4 V IL Temperature Range TOP -40 +25 +85 °C Switching Frequency Storage Temperature Range T -65 +25 +160 °C ST The PE42440 has a maximum 25 kHz switching rate. Note: 1. Operation should be restricted to the limits in the Operating Ranges table Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Evaluation Kit Figure 4. Evaluation Board Layouts Peregrine Specification 101-0287-03 The SP4T switch EK Board was designed to ease customer evaluation of Peregrine’s PE42440. The RF common port is connected through a 50Ω transmission line via the top SMA connector, J1. RF1, RF2, RF3 and RF4 are connected through 50Ω transmission lines via SMA connectors J3, J5, J2 and J4, respectively. A through 50Ω transmission is available via SMA connectors J6 and J7. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a four metal layer FR4 material with a total thickness of 62 mils. The middle layers provide ground for the transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 32 mils, trace gaps of 25 mils, and metal thickness of 2.1 mils. Figure 5. Evaluation Board Schematic Peregrine Specification 102-0339-02 JJ11 SSMMAASSMM 2 1 T N A JSJS33MMAASSMM 12 11 10 9 JSJS22MMAASSMM 1 RF1 GND ANT GND GND RF3 1 2 13 RF1 RF3 8 2 14 GND UU11 GND 7 JSJS55MMAASSMM 15 RF2 QQFFNN5500PP33XX33--1166PP RF4 6 JSJS44MMAASSMM 1 RF2 16 GND GND 5 RF4 1 D D 2 GN VD V2 V1 2 1 2 3 4 JJ88 HHEEAADDEERR 1144 14 14 13 13 RR22 11MM 11028 81102 1179 7911 VDD RR11 11MM 246 246 135 135 VV12 JJ66 JJ77 CC44 CC33 CC22 CC11 SSMMAASSMM SSMMAASSMM DDNNII DDNNII DDNNII DDNNII 1 Through Line 1 Unlabeled 2 2 Test Line ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 4 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Typical Performance Data Figure 6. Insertion Loss: RFC-RF @ 25°C Figure 7. Insertion Loss: RFC-RF @ 2.75V Figure 8. Isolation: RFC-RF @ 25°C Figure 9. Isolation: RFC-RF @ 2.75V Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Figure 10. Return Loss at Active Port @ 25 °C Figure 11. Return Loss at Active Port @ 2.75 V Figure 12. Maximum Operating Power vs. Frequency 30.00 VDD=2.65V 25.00 VDD=2.75V 20.00 VDD=2.95V ) VDD=3.15V m 15.00 B VDD=3.2V d r ( 10.00 e w o 5.00 P ut 0.00 p n I -5.00 -10.00 -15.00 1 10 100 1000 10000 100000 Frequency (kHz) ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 6 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Figure 13. Package Drawing 16-lead 3 x 3 x 0.75 mm QFN 0.10C A 3.00 (2X) 0.28 1.70±0.05 (X16) 0.50 B 9 12 0.575 (X16) 0.50 (X12) 8 13 1.70±0.05 1.75 3.40 3.00 5 16 0.23±0.05 (X16) 0.10C 4 1 0.375±0.05 (2X) (X16) 1.50 1.75 Pin #1 Corner 3.40 TOP VIEW BOTTOM VIEW RECOMMENDED LAND PATTERN 181-0024 0.10C 0.10 C A B 0.80 MAX 0.05 C 0.05C ALL FEATURES SEATING PLANE 0.203 0.05 C SIDE VIEW Figure 14. Marking Specifications 42440 YYWW = Date Code YYWW ZZZZZ = Last five digits of Lot Number ZZZZZ 17-0009 Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com

PE42440 Product Specification Figure 15. Tape and Reel Specifications 16-lead 3x3x0.75 mm QFN Ao = 3.30 ± 0.1 mm Bo = 3.30 ± 0.1 mm Ko = 1.10 ± 0.1 mm Tape Feed Direction Table 7. Ordering Information Order Code Description Package Shipping Method PE42440MLBB-Z PE42440G-16QFN 3 x 3 mm-3000C Green 16-lead 3 x 3 mm QFN 3000 units / T&R EK42440-02 PE42440-16QFN 3 x 3 mm-EK Evaluation Kit 1 / Box Sales Contact and Information For Sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains No patent rights or licenses to any circuits described in this datasheet are implied or granted to any design target specifications for product development. Specifications and features may change in third party. any manner without notice. Preliminary Specification: The datasheet contains preliminary Peregrine’s products are not designed or intended for use in devices or systems intended for surgical data. Additional data may be added at a later date. Peregrine reserves the right to change implant, or in other applications intended to support or sustain life, or in any application in which the specifications at any time without notice in order to supply the best possible product. Product failure of the Peregrine product could create a situation in which personal injury or death might occur. Specification: The datasheet contains final data. In the event Peregrine decides to change the Peregrine assumes no liability for damages, including consequential or incidental damages, arising out specifications, Peregrine will notify customers of the intended changes by issuing a CNF of the use of its products in such applications. (Customer Notification Form). The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch The information in this datasheet is believed to be reliable. However, Peregrine assumes no and DuNE are trademarks of Peregrine Semiconductor Corp. All other trademarks mentioned herein liability for the use of this information. Use shall be entirely at the user’s own risk. are the property of their respective companies. ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 8 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com