Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

PDTC143E series NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k Rev. 10 — 8 December 2011 Product data sheet 1. Product profile 1.1 General description NPN Resistor-Equipped Transistor(RET) family in Surface-Mounted Device(SMD) plastic packages. Table 1. Product overview Type number Package PNP Package complement configuration NXP JEITA JEDEC PDTC143EE SOT416 SC-75 - PDTA143EE ultra small PDTC143EM SOT883 SC-101 - PDTA143EM leadless ultra small PDTC143ET SOT23 - TO-236AB PDTA143ET small PDTC143EU SOT323 SC-70 - PDTA143EU very small 1.2 Features and benefits  100mA output current capability  Reduces component count  Built-in bias resistors  Reduces pick and place costs  Simplifies circuit design  AEC-Q101 qualified 1.3 Applications  Digital applications in automotive and  Cost-saving alternative for BC847/857 industrial segments series in digital applications  Control of IC inputs  Switching loads 1.4 Quick reference data Table 2. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V collector-emitter voltage open base - - 50 V CEO I output current - - 100 mA O R1 bias resistor1 (input) 3.3 4.7 6.1 k R2/R1 bias resistor ratio 0.8 1 1.2

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 2. Pinning information Table 3. Pinning Pin Description Simplified outline Graphic symbol SOT23; SOT323; SOT416 1 input (base) 2 GND (emitter) 3 3 R1 3 output (collector) 1 R2 1 2 2 006aaa144 sym007 SOT883 1 input (base) 2 GND (emitter) 1 3 3 R1 3 output (collector) 2 1 Transparent top view R2 2 sym007 3. Ordering information Table 4. Ordering information Type number Package Name Description Version PDTC143EE SC-75 plastic surface-mounted package; 3leads SOT416 PDTC143EM SC-101 leadless ultra small plastic package; 3solder lands; SOT883 body 1.00.60.5mm PDTC143ET - plastic surface-mounted package; 3leads SOT23 PDTC143EU SC-70 plastic surface-mounted package; 3leads SOT323 4. Marking Table 5. Marking codes Type number Marking code[1] PDTC143EE 02 PDTC143EM E1 PDTC143ET *02 PDTC143EU *02 [1] * = placeholder for manufacturing site code PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 2 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V collector-base voltage open emitter - 50 V CBO V collector-emitter voltage open base - 50 V CEO V emitter-base voltage open collector - 10 V EBO V input voltage I positive - +30 V negative - 10 V I output current - 100 mA O I peak collector current single pulse; - 100 mA CM t 1ms p P total power dissipation T 25C tot amb PDTC143EE(SOT416) [1][2] - 150 mW PDTC143EM(SOT883) [2][3] - 250 mW PDTC143ET(SOT23) [1] - 250 mW PDTC143EU(SOT323) [1] - 200 mW T junction temperature - 150 C j T ambient temperature 65 +150 C amb T storage temperature 65 +150 C stg [1] Device mounted on an FR4Printed-Circuit Board(PCB), single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4PCB with 70m copper strip line, standard footprint. PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 3 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 006aac778 300 Ptot (1) (mW) (2) 200 (3) 100 0 -75 -25 25 75 125 175 Tamb (°C) (1) SOT23; FR4PCB, standard footprint SOT883; FR4PCB with 70m copper strip line, standard footprint (2) SOT323; FR4PCB, standard footprint (3) SOT416; FR4PCB, standard footprint Fig 1. Power derating curves 6. Thermal characteristics Table 7. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R thermal resistance from junction in free air th(j-a) to ambient PDTC143EE(SOT416) [1][2] - - 830 K/W PDTC143EM(SOT883) [2][3] - - 500 K/W PDTC143ET(SOT23) [1] - - 500 K/W PDTC143EU(SOT323) [1] - - 625 K/W [1] Device mounted on an FR4PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4PCB with 70 m copper strip line, standard footprint. PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 4 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 103 006aac781 duty cycle = 1 Zth(j-a) 0.75 (K/W) 0.5 0.33 102 0.2 0.1 0.05 0.02 0.01 10 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC143EE(SOT416); typicalvalues 103 006aac782 Zth(j-a) duty cycle = 1 (K/W) 0.75 0.5 102 0.33 0.2 0.1 0.05 10 0.02 0.01 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4PCB, 70m copper strip line Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC143EM(SOT883); typicalvalues PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 5 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 103 006aac779 duty cycle = 1 Zth(j-a) 0.75 (K/W) 0.5 0.33 102 0.2 0.1 0.05 0.02 0.01 10 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4PCB, standard footprint Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC143ET(SOT23); typicalvalues 103 006aac780 duty cycle = 1 Zth(j-a) 0.75 (K/W) 0.5 0.33 102 0.2 0.1 0.05 0.02 0.01 10 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4PCB, standard footprint Fig 5. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC143EU(SOT323); typicalvalues PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 6 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 7. Characteristics Table 8. Characteristics T =25C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit I collector-base cut-off V =50V; I =0A - - 100 nA CBO CB E current I collector-emitter V =30V; I =0A - - 1 A CEO CE B cut-off current V =30V; I =0A; - - 5 A CE B T =150C j I emitter-base cut-off V =5V; I =0A - - 900 A EBO EB C current h DCcurrent gain V =5V; I =10mA 30 - - FE CE C V collector-emitter I =10mA; I =0.5mA - - 150 mV CEsat C B saturation voltage V off-state input voltage V =5V; I =100A - 1.1 0.5 V I(off) CE C V on-state input voltage V =0.3V; I =20mA 2.5 1.9 - V I(on) CE C R1 bias resistor1 (input) 3.3 4.7 6.1 k R2/R1 bias resistor ratio 0.8 1 1.2 C collector capacitance V =10V; I =i =0A; - - 2.5 pF c CB E e f=1MHz f transition frequency V =5V; I =10mA; [1] - 230 - MHz T CE C f=100MHz [1] Characteristics of built-in transistor PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 7 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 103 006aac831 1 006aac832 hFE (1) (2) VCEsat (V) (3) 102 (1) (2) (3) 10-1 10 1 10-2 10-1 1 10 102 1 10 102 IC (mA) IC (mA) V =5V I /I =20 CE C B (1) Tamb=100C (1) Tamb=100C (2) Tamb=25C (2) Tamb=25C (3) Tamb=40C (3) Tamb=40C Fig 6. DCcurrent gain as a function of collector Fig 7. Collector-emitter saturation voltage as a current; typical values function of collector current; typical values 006aac833 006aac834 10 10 VI(on) VI(off) (V) (V) (1) (1) (2) (2) 1 (3) 1 (3) 10-1 10-1 10-1 1 10 102 10-1 1 10 IC (mA) IC (mA) V =0.3V V =5V CE CE (1) Tamb=40C (1) Tamb=40C (2) Tamb=25C (2) Tamb=25C (3) Tamb=100C (3) Tamb=100C Fig 8. On-state input voltage as a function of Fig 9. Off-state input voltage as a function of collector current; typical values collector current; typical values PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 8 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 3 006aac835 103 006aac757 Cc (pF) fT (MHz) 2 102 1 0 10 0 10 20 30 40 50 10-1 1 10 102 VCB (V) IC (mA) f=1MHz; Tamb=25C VCE=5V; Tamb=25C Fig 10. Collector capacitance as a function of Fig 11. Transition frequency as a function of collector collector-base voltage; typical values current; typical values of built-in transistor 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 9 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 9. Package outline 1.8 0.95 0.62 1.4 0.60 0.55 0.55 0.50 0.47 0.46 3 0.45 0.15 0.30 3 0.22 1.75 0.9 1.45 0.7 0.65 1.02 0.95 0.30 0.22 2 1 1 2 0.30 0.25 0.15 0.10 0.20 1 0.12 0.35 Dimensions in mm 04-11-04 Dimensions in mm 03-04-03 Fig 12. Package outline PDTC143EE(SOT416/SC-75) Fig 13. Package outline PDTC143EM (SOT883/SC-101) 3.0 1.1 2.2 1.1 2.8 0.9 1.8 0.8 3 3 0.45 0.15 0.45 0.15 2.5 1.4 2.2 1.35 2.1 1.2 2.0 1.15 1 2 1 2 0.48 0.15 0.4 0.25 0.38 0.09 0.3 0.10 1.9 1.3 Dimensions in mm 04-11-04 Dimensions in mm 04-11-04 Fig 14. Package outline PDTC143ET(SOT23) Fig 15. Package outline PDTC143EU(SOT323/SC-70) 10. Packing information Table 9. Packing met hods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 3000 5000 10000 PDTC143EE SOT416 4mm pitch, 8mm tape and reel -115 - -135 PDTC143EM SOT883 2mm pitch, 8mm tape and reel - - -315 PDTC143ET SOT23 4mm pitch, 8mm tape and reel -215 - -235 PDTC143EU SOT323 4mm pitch, 8mm tape and reel -115 - -135 [1] For further information and the availability of packing methods, see Section14. PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 10 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 11. Soldering 2.2 1.7 solder lands solder resist 0.85 1 2 solder paste 0.5 (3×) occupied area Dimensions in mm 0.6 (3×) 1.3 sot416_fr Reflow soldering is the only recommended soldering method. Fig 16. Reflow soldering footprint PDTC143EE(SOT416/SC-75) 1.3 0.7 R0.05 (12×) solder lands solder resist 0.9 0.6 0.7 0.25 solder paste (2×) occupied area 0.3 (2×) 0.3 Dimensions in mm 0.4 (2×) 0.4 sot883_fr Reflow soldering is the only recommended soldering method. Fig 17. Reflow soldering footprint PDTC143EM(SOT883/SC-101) PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 11 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 3.3 2.9 1.9 solder lands solder resist 3 1.7 2 solder paste 0.7 0.6 occupied area (3×) (3×) Dimensions in mm 0.5 (3×) 0.6 (3×) 1 sot023_fr Fig 18. Reflow soldering footprint PDTC143ET(SOT23) 2.2 1.2 (2×) 1.4 (2×) solder lands 4.6 2.6 solder resist occupied area Dimensions in mm 1.4 preferred transport direction during soldering 2.8 4.5 sot023_fw Fig 19. Wave soldering footprint PDTC143ET(SOT23) PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 12 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 2.65 1.85 1.325 solder lands 2 solder resist 2.35 (03.×6) 3 1.3 solder paste 0.5 occupied area 1 (3×) Dimensions in mm 0.55 (3×) sot323_fr Fig 20. Reflow soldering footprint PDTC143EU(SOT323/SC-70) 4.6 2.575 1.425 (3×) solder lands solder resist occupied area 3.65 2.1 1.8 Dimensions in mm preferred transport 09 (2×) direction during soldering sot323_fw Fig 21. Wave soldering footprint PDTC143EU(SOT323/SC-70) PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 13 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 12. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PDTC143E_SERv.10 20111208 Product data sheet - PDTC143E_SERIESv.9 Modifications: • The format of this document has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. • Type numbers PDTC143EEF, PDTC143EK and PDTC143ES removed. • Section 1 “Product profile”: updated • Section 4 “Marking”: updated • Figure1 to 11: added • Section 6 “Thermal characteristics”: updated • Table 8 “Characteristics”: V redefined to V on-state input voltage, V redefined to i(on) I(on) i(off) V off-state input voltage, I updated, f added I(off) CEO T • Section 8 “Test information”: added • Section 9 “Package outline”: superseded by minimized package outline drawings • Section 10 “Packing information”: added • Section 11 “Soldering”: added • Section 13 “Legal information”: updated PDTC143E_SERIESv.9 20040805 Product data sheet - PDTC143E_SERIESv.8 PDTC143E_SERIESv.8 20040318 Product specification - PDTC143E_SERIESv.7 PDTC143E_SERIESv.7 20040112 Product specification - PDTC143E_SERIESv.6 PDTC143E_SERIESv.6 20030910 Product specification - PDTC143E_SERIESv.5 PDTC143E_SERIESv.5 20030410 Product specification - - PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 14 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URLhttp://www.nxp.com. 13.2 Definitions Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or Draft — The document is a draft version only. The content is still under malfunction of an NXP Semiconductors product can reasonably be expected internal review and subject to formal approval, which may result in to result in personal injury, death or severe property or environmental modifications or additions. NXP Semiconductors does not give any damage. NXP Semiconductors and its suppliers accept no liability for representations or warranties as to the accuracy or completeness of inclusion and/or use of NXP Semiconductors products in such equipment or information included herein and shall have no liability for the consequences of applications and therefore such inclusion and/or use is at the customer’s own use of such information. risk. Short data sheet — A short data sheet is an extract from a full data sheet Applications — Applications that are described herein for any of these with the same product type number(s) and title. A short data sheet is intended products are for illustrative purposes only. NXP Semiconductors makes no for quick reference only and should not be relied upon to contain detailed and representation or warranty that such applications will be suitable for the full information. For detailed and full information see the relevant full data specified use without further testing or modification. sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the Customers are responsible for the design and operation of their applications full data sheet shall prevail. and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product Product specification — The information and data provided in a Product design. It is customer’s sole responsibility to determine whether the NXP data sheet shall define the specification of the product as agreed between Semiconductors product is suitable and fit for the customer’s applications and NXP Semiconductors and its customer, unless NXP Semiconductors and products planned, as well as for the planned application and use of customer have explicitly agreed otherwise in writing. In no event however, customer’s third party customer(s). Customers should provide appropriate shall an agreement be valid in which the NXP Semiconductors product is design and operating safeguards to minimize the risks associated with their deemed to offer functions and qualities beyond those described in the applications and products. Product data sheet. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the 13.3 Disclaimers customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Limited warranty and liability — Information in this document is believed to Semiconductors products in order to avoid a default of the applications and be accurate and reliable. However, NXP Semiconductors does not give any the products or of the application or use by customer’s third party representations or warranties, expressed or implied, as to the accuracy or customer(s). NXP does not accept any liability in this respect. completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no Limiting values — Stress above one or more limiting values (as defined in responsibility for the content in this document if provided by an information the Absolute Maximum Ratings System of IEC60134) will cause permanent source outside of NXP Semiconductors. damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in In no event shall NXP Semiconductors be liable for any indirect, incidental, the Recommended operating conditions section (if present) or the punitive, special or consequential damages (including - without limitation - lost Characteristics sections of this document is not warranted. Constant or profits, lost savings, business interruption, costs related to the removal or repeated exposure to limiting values will permanently and irreversibly affect replacement of any products or rework charges) whether or not such the quality and reliability of the device. damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards sale, as published at http://www.nxp.com/profile/terms, unless otherwise customer for the products described herein shall be limited in accordance agreed in a valid written individual agreement. In case an individual with the Terms and conditions of commercial sale of NXP Semiconductors. agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to Right to make changes — NXP Semiconductors reserves the right to make applying the customer’s general terms and conditions with regard to the changes to information published in this document, including without purchase of NXP Semiconductors products by customer. limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior No offer to sell or license — Nothing in this document may be interpreted or to the publication hereof. construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 15 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k Export control — This document as well as the item(s) described herein 13.4 Trademarks may be subject to export control regulations. Export might require a prior authorization from competent authorities. Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PDTC143E_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 10 — 8 December 2011 16 of 17

PDTC143E series NXP Semiconductors NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 15. Contents 1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 General description . . . . . . . . . . . . . . . . . . . . . 1 1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1 1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2 4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 Thermal characteristics . . . . . . . . . . . . . . . . . . 4 7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 7 8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 9 8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 9 9 Package outline. . . . . . . . . . . . . . . . . . . . . . . . 10 10 Packing information . . . . . . . . . . . . . . . . . . . . 10 11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 14 13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 15 13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 15 13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 14 Contact information. . . . . . . . . . . . . . . . . . . . . 16 15 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 December 2011 Document identifier: PDTC143E_SER