CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCS Chip Type, LongLife Assurance Load life of 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 　260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. PCL Long Life PCS Long Life PCF Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 4 to 16V Rated Capacitance Range 22 to 560µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is ESR ( 1) 150% or less than the initial specified value applied for 5000 hours at 105°C. Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the Damp Heat tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right. tan δ 130% or less than the initial specified value Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall Leakage current ( 2) Less than or equal to the initial specified value Resistance to not exceed 60 seconds. Soldering Heat In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Dimensions Type numbering system (Example : 6.3V 220µF) Positive Plastic platform X. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Capacitance Lot No. 0.3MAX. C±0.2 MA P C S 0 J 2 2 1 MC L 1 G S 5 0. Taping code CS220j941 D±0.5φ B±0.2 E A±0.2 ConSfigizuer actoiodne Capacitance tolerance (±20%) Series Voltage (j:6.3v) L+-00..41 H Negative Rated capacitance (220µF) Rated voltage (6.3V) Series name Type (mm) Size φ5 × 6L φ6.3 × 6L φ8 × 7L φD 5.0 6.3 8.0 L 5.9 5.9 6.9 A 6.0 7.3 9.0 B 5.3 6.6 8.3 Voltage C 5.3 6.6 8.3 Frequency coefficient of rated ripple current V 4 6.3 10 16 E 1.6 2.1 3.2 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 Code g j A C Coefficient 0.05 0.30 0.70 1.00 Dimension table in next page. 47

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCS Dimensions Rated Voltage ESR Rated Ripple Surge Voltage Rated Capacitance Case Size Leakage Current (V) tan δ (mΩ) (mArms) Part Number (V) (µF) φD × L (mm) (µA) (code) (at 100kHz 20°C) (105°C/100kHz) 150 5 × 6 0.12 120 25 2200 PCS0G151MCL1GS 4 330 6.3 × 6 0.12 264 20 2800 PCS0G331MCL1GS 4.6 (0G) 330 8 × 7 0.12 264 22 3200 PCS0G331MCL9GS 560 8 × 7 0.12 448 18 3600 PCS0G561MCL1GS 47 5 × 6 0.12 100 35 1600 PCS0J470MCL1GS 100 5 × 6 0.12 126 25 2400 PCS0J101MCL1GS 100 6.3 × 6 0.12 126 22 2800 PCS0J101MCL9GS 6.3 7.2 120 6.3 × 6 0.12 151 22 2800 PCS0J121MCL9GS (0J) 220 6.3 × 6 0.12 277 20 2800 PCS0J221MCL1GS 220 8 × 7 0.12 277 22 3200 PCS0J221MCL9GS 390 8 × 7 0.12 491 22 3200 PCS0J391MCL1GS 33 5 × 6 0.12 100 40 1300 PCS1A330MCL1GS 56 6.3 × 6 0.12 112 27 2300 PCS1A560MCL9GS 10 68 5 × 6 0.12 136 30 2100 PCS1A680MCL1GS 11.5 (1A) 120 6.3 × 6 0.12 240 27 2300 PCS1A121MCL1GS 150 8 × 7 0.12 300 30 2600 PCS1A151MCL9GS 270 8 × 7 0.12 540 22 3200 PCS1A271MCL1GS 22 5 × 6 0.12 100 45 1100 PCS1C220MCL1GS 39 5 × 6 0.12 125 35 2000 PCS1C390MCL1GS 16 39 6.3 × 6 0.12 125 30 2200 PCS1C390MCL9GS 18.4 (1C) 68 6.3 × 6 0.12 218 30 2200 PCS1C680MCL1GS 82 8 × 7 0.12 262 28 2800 PCS1C820MCL9GS 120 8 × 7 0.12 384 28 2800 PCS1C121MCL1GS Rated ripple current (mArms) at 105°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 48

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: PCS0G151MCL1GS PCS0G331MCL1GS PCS0G331MCL9GS PCS0G561MCL1GS PCS0J101MCL1GS PCS0J101MCL9GS PCS0J121MCL9GS PCS0J221MCL1GS PCS0J221MCL9GS PCS0J391MCL1GS PCS0J470MCL1GS PCS1A121MCL1GS PCS1A151MCL9GS PCS1A271MCL1GS PCS1A330MCL1GS PCS1A560MCL9GS PCS1A680MCL1GS PCS1C121MCL1GS PCS1C220MCL1GS PCS1C390MCL1GS PCS1C390MCL9GS PCS1C680MCL1GS PCS1C820MCL9GS