User's Guide SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U The PCM510x family of ICs are advanced segment, high-performance, hardware-programmable stereo digital-to-analog converters (DACs). These devices employ internal line drivers together with an internal PLL and BCLK reference, so that a serial clock signal (SCK) can be derived. The advanced segment architecture enables excellent dynamic performance and improved tolerance to clock jitter, and the 2.1- V ground-centered outputs eliminate the need for output dc blocking capacitors. The PCM510xEVM-U RMS is designed to support the PCM5100, PCM5101, and PCM5102 DACs. The PCM510xEVM-U also employstheTAS1020BUSBcontrollerandtheSRC4392 asynchronoussamplerateconverter. This user’s guide describes the operation of the PCM510xEVM-U and the Texas Instruments CodecControl software. CodecControl provides a graphical user interface for supported TI audio codecs. ThesoftwareiscompatiblewithMicrosoft®Windows® XP,Vista,andWindows7. Contents 1 Introduction................................................................................................................... 2 2 PCM510xEVM-U............................................................................................................. 3 3 CodecControlSoftware..................................................................................................... 9 4 PCM510xEVM-U .......................................................................................................... 14 ListofFigures 1 PCM510xEVM-U............................................................................................................. 3 2 PCM510xEVM-UBlockDiagram.......................................................................................... 4 3 EVMSoftwareWindow...................................................................................................... 9 4 CommandDialog........................................................................................................... 11 5 PCM510xEVM-USchematic.............................................................................................. 14 6 PCM510xEVM-UPowerandUSBController........................................................................... 15 7 PCM510xEVM-UDigitalI/OandSource................................................................................ 16 8 PCM5102EVM-URevisionBTopComposite.......................................................................... 17 9 PCM5102EVM-URevisionBTopCopper.............................................................................. 17 10 PCM5102EVM-URevisionBCopperLayer2.......................................................................... 18 11 PCM5102EVM-URevisionBCopperLayer3.......................................................................... 18 12 PCM5102EVM-URevisionBBottomCopper.......................................................................... 19 13 PCM5102EVM-URevisionBBottomComposite...................................................................... 19 ListofTables 1 PCM510xEVM-UHeaders,TestPoints,Jumpers,andSwitches..................................................... 5 2 SW3ClockSelection........................................................................................................ 6 3 PCM5102xEVM-UBillofMaterialsRevC.............................................................................. 20 Microsoft,WindowsareregisteredtrademarksofMicrosoftCorporation. Allothertrademarksarethepropertyoftheirrespectiveowners. SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 1 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

Introduction www.ti.com 1 Introduction CodecControlsoftwareisintendedtofacilitateuserevaluationofTIaudiocodecs.Itincludesawiderange offeatures,dependingonthespecificcodeccapabilities.ThePCM510xEVM-Uworkstogetherwiththe CodecControlsoftware.ItconnectstoaPCviaanavailableUSBportandenumeratesasaUSB-class audiodevice.OnceconfiguredwiththeCodecControlsoftware,theUSBwillprovideI2Ccontrolandpower totheEVM.However,thisEVMdoesnotsupportI2SUSBaudiostreamingfromthehostcomputer. ForamoredetaileddescriptionofthePCM510xproductline,refertotheproductdatasheetavailable fromtheTexasInstrumentswebsiteathttp://www.ti.com/. Throughoutthisdocument,theabbreviation EVMandthetermevaluationmodulearesynonymouswith thePCM510xEVM-U.Unlessotherwisenoted,allreferencestothePCM510xindicatecomplete functionalityofallthreerelateddevices(PCM5100,PCM5101,andPCM5102). 1.1 Information About Cautions and Warnings Thisdocumentcontainscautionstatements. CAUTION This is an example of a caution statement. A caution statement describes a situationthatcouldpotentiallydamageyoursoftwareorequipment. Theinformationinacautionorawarningisprovidedforyourprotection.Pleasereadeachcautionand warningcarefully. 1.2 Related Documentation from Texas Instruments ThefollowingdocumentprovidesinformationregardingTexasInstrumentsintegratedcircuitsusedinthe assemblyofthePCM510xEVM-U.ThesedocumentsareavailablefromtheTIwebsite.Thelastcharacter oftheliteraturenumbercorrespondstothedocumentrevisionthatiscurrentatthetimeofthewritingof thisdocument.NewerrevisionsmaybeavailablefromtheTIwebsiteathttp://www.ti.com/. DataSheet LiteratureNumber PCM510x SLAS859A TAS1020B SLES025A SRC4392 SBFS029C 1.3 Applications Questions IfyouhavequestionsregardingeithertheuseofthisevaluationmoduleorotherTexasInstruments evaluationmodules,postaquestionintheAudioConvertersforumathttp://e2e.ti.com.Includeinthe subjectheadingtheproductinwhichyouareinterested. 1.4 FCC Warning Thisequipmentisintendedforuseinalaboratorytestenvironmentonly.Itgenerates,uses,andcan radiateradiofrequencyenergyandhasnotbeentestedforcompliancewiththelimitsofcomputing devicespursuanttosubpartJofpart15ofFCCrules,whicharedesignedtoprovidereasonable protectionagainstradiofrequencyinterference.Operationofthisequipmentinotherenvironmentsmay causeinterferencewithradiocommunications,inwhichcasetheuserathisownexpenseisrequiredto takewhatevermeasuresmayberequiredtocorrectthisinterference. 2 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U 2 PCM510xEVM-U 2.1 Electrostatic Discharge Warning ManyofthecomponentsonthePCM510xEVM-Uaresusceptibletodamagebyelectrostaticdischarge (ESD).CustomersareadvisedtoobserveproperESDhandlingprecautionswhenunpackingandhandling theEVM,includingtheuseofagroundedwriststrapatanapprovedESDworkstation. CAUTION Failure to observe ESD handling procedures may result in damage to EVM components. 2.2 Overview ThePCM510xEVM-Uisaneasytouse,USB-interface,multi-functionalsystemallowingfordigital optical/SPDIF,lineorexternalI2Sinputwithvaryingoptionsforclocksourcesandclockfrequencies. Alongwithonboardsamplerateconversion,thisarchitectureallowsforversatileuseandtestingofthe PCM510xfamilyofparts.Figure1showsthePCM510xEVM-Uwiththejumperandswitchlocations noted. (1) Thesilkscreenlabelshownontheboardmaybedifferenttoindicateaspecificdevice.Otherwise,theEVMis identicaltotheoneshownhere. Figure1.PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 3 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com ItshouldbenotedthatthePCM510xEVM-Uisdividedintotwosections.Thelefthalfcontainsthedigital andUSBinterface,samplerateconversion,optical/SPDIFandRCAdigitalinputs,clockcircuitry,and resetlogic.TherighthalfcontainsthePCM510xdeviceandtheanalogcircuitryaccompanyingit.Note thatthishalfofthePCM510xEVM-Uistheportionrequiredonapotentialcustomerapplication.Theleft halfisintendedtoemulateawidevarietyoftestingoptionsandscenariosforthePCM510xdevice. Itshouldalsobenotedthatthedigitalinterfacesection,orlefthalfofthePCM510xEVM-U,isafour-layer design.However,thePCM510xdeviceandanalogcircuitry,orrighthalfoftheEVMboard,consistsonly oftwolayers. FortheanalogcircuitrysurroundingthePCM510xdevice,certaincomponentscanberemovedatthecost ofhigherperformance.Thisconfigurabilitymayallowforoptimalratiobetweenboardspaceand performance.ComponentssuchasC1,C3,C7,andC11canallberemovedforadditionalboardspace. ThePCM510xEVM-Ufeatures: • USBInterface • Analogoutput • TXoutput(J5) • Optical/SPDIFinput • I2Sinput • Hardware-andsoftware-programmableoptions • Digitalaudiointerfacetestpoints • Controlinterfacetestpoints EVMBlockDiagram Figure2 showstheblockdiagramforthePCM510xEVM-U. TAS1020B USB Microcontroller USB I/F GPIO Mini-USB Interface I2S I2C/SPI Selection SRC4392 Sample Rate Converter Audio Serial Port A Audio Serial Port B PCM510x Analog W3 2.1 VRMSDAC Outputs SRC S/PDIF DIR DIT (RCA) RXCKO S/PDIF (Optical) MCLK Select TAS1020B MCLK (11.288 MHz) SW3 W5 EXT 3.3 V BNC MCLK 24.576 MHz OSC RXCKO Figure2.PCM510xEVM-UBlockDiagram Jumpers,Connectors,TestPoints,Switches 4 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U Table1summarizestheconnectors,testpoints,jumpers,andswitchesonthePCM510xEVM-U. Table1.PCM510xEVM-UHeaders,TestPoints,Jumpers,andSwitches Connectors/Switch/Jumper/TestPoint Description Headers W1 I2C/SPISelection.ShuntPins1-2forSPI,2-3forI2CControl Mode(donotcareforPCM510x) W2 I2C/SPISelection.ShuntPins1-2forSPI,2-3forI2CControl Mode(donotcareforPCM510x) W3 InterfaceConnection.Shuntrespectiveheaderstosenddigital signalstoPCM510x. W4 AVDDPower.Shuntpins1-2or3-4forAVDD. W5 MCLK/RXCKOSelect TestPoints TP1 GPIO4/GPIO4/MAST(donotcareforPCM510x) TP2 GPIO5/GPIO5/ATT0(donotcareforPCM510x) TP3 MC/SCL/ATT1(donotcareforPCM510x) TP4 MOSI/SDA/ATT2(donotcareforPCM510x) TP5 GPIO3/GPIO3/AGNS(donotcareforPCM510x) TP6 GPIO2/ADR2/DOUT(donotcareforPCM510x) TP7 MODE1(donotcareforPCM510x) TP8 MS/MODE2/MODE2(donotcareforPCM510x) TP9 FLT TP10 SCK TP11 BCK TP12 DIN TP13 LRCK TP14 FMT TP15 XSMT TP16 PCM510xAnalogOutput(R) TP17 PCM510xAnalogOutput(L) TP18 1.8V TP19 3.3V TP20 3.3VA TP21 GND TP22 GND TP23 GND TP24 AGND TP25 AGND TP26 AGND TP27 BCLK(TAS1020B) TP28 WCLK(TAS1020B) TP29 DIN(TAS1020B) TP30 SCL(TAS1020B) TP31 SDA(TAS1020B) TP32 RESET Jumpers J1 PCM510xRCAAnalogOutput(R) J2 PCM510xRCAAnalogOutput(L) J3 Mini-USBConnection J4 OpticalS/PDIFInput SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 5 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com Table1.PCM510xEVM-UHeaders,TestPoints,Jumpers,and Switches(continued) Connectors/Switch/Jumper/TestPoint Description J5 CoaxialS/PDIFInput J6 BNCExternalMCLKInput Switches SW1 EVMReset SW2 SelectEVMApplication SW3 MCLKSelect LEDs D2 RXLock D3 SRCReady 2.3 Clock Circuitry SW3allowsforMCLKselectionfrommultiplesources.ThePCM510xEVM-UcontainsanexternalBNC jack,J6,aswellasoneprogrammedoscillatorthatprovidesaclockfrequencyof24.576MHz.The TAS1020BalsoprovidesaMCLKoutput;bydefault,thisclockisusedasthemasterclockforthe PCM510xEVM-U.Dependingontheapplicationrequirements,theSRC4392isalsoabletoderivea receivedclockoutput(RCKO)outputbasedontheinputclockfrequency,andthisderivedclockoutput canbeusedastheMCLKinputforthePCM510xaswell.Thisoptionisenabledbysettingashuntin position1-2(RXCKO)onthe3-pinjumperW5.IfW5hasashuntinposition2-3,thensettingSW3 determineswhichMCLKsourceisused,assummarizedinTable2. Table2.SW3ClockSelection Setting A B C OnboardMCLKfrom Low Low Low TAS1020B ExternalMCLK3.3-V High Low Low BNCInput 24.576-MHzMCLKfrom High High High PLLY3 2.3.1 MCLKSourceMatching TheSRC4392isequippedwithtwoaudioserialdataports,eachofwhichgeneratesBCLKandLRCLK signals.WhentheSRC4392receivesanS/PDIFinput,itautomaticallyderivestheMCLKoftheinput, whichissenttotheRXCKOpin.DividersareusedtosendthegeneratedBLCKandLRCLKfromthe audioports(iftheyareinmastermode).Forcertainusecases,theSRC4392issetupsothattheseports areused.WhenroutingthroughtheaudioserialportsontheSRC4392,itisimportanttouseRXCKOas themasterclocksourceforthePCM510x.Inordertoensureproperoperation,themasterclocksource mustbesynchronizedtothebitandwordclocksuppliedtothePCM510x.Therefore,themasterclock sourceforthePCM510xmustalsobereplicatedfromthedigitalinputsource,whichiswhyRXCKOmust bechosen.IfthemasterclocksourceforthePCM510xistheonboardMCLKfromtheTAS1020BUSB controller,forexample,thenthereispotentialforsynchronizationmismatchbetweenthemasterclock suppliedtothePCM510xandthebitandwordclocksbeingsuppliedtothePCM510x.Forusecases routingthroughtheSRC4392audioserialports,looktojumperW5forselectingRXCKOasthemaster clocksource,asopposedtooneoftheoptionschosenbyadjustingSW3.TheSRC4392productdata sheethasadditionalroutinginformation. ThePCM510xdevicescontainaninternalPLLandBCLKreference,sothattheMCLKcanbegenerated internally.WhenusingexternalI2SinputdirectlyintotheW3jumper,aMCLKcanbederivedformthe BCLKinput.RefertothePCM510xproductdatasheetformoredetails. 6 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U 2.4 Use Cases 2.4.1 ScriptsandSetup WhilethePCM510xisonlyhardwareprogrammable,theCodecControlsoftwareisstillnecessaryto properlyconfigurethePCM510xEVM-Ufordifferentusecases,suchasoptical,SPDIF,andcoaxialinput tothePCM510x.MostoftheI/OroutingandclockfrequencyselectiononthePCM510xevaluation moduleisperformedbytheSRC4392.Section2.4.2isjustoneexamplescriptthatadjuststheSRC4392 registersaccordingly,aswellassetproperjumperconfigurations. 2.4.2 Optical/SPDIFInputviaJ4(48kHz,RXCKOMasterClock) # RESET RESET THIS IS MASTER RESET FOR SRC # SW3 (2-7) turned on, rest turned off # Page 0 = DEFAULT for Control # Write to page 0 w E0 7F 00 # Register 01, Bit 7 = 1 resets to default d 100 w E0 01 80 # Delay 0.1 sec to allow part to reset d 100 # Register 01, Bit 7 = 0 for normal operation w E0 01 00 d 100 # w E0 7F 00 # Register 01, Bit 7 = 1 resets to default #----- Setup Port A ------# # 24bit I2S, Master mode, DIR source, at mute # Divide by 256, MCLK input source w E0 03 69 w E0 04 0B #----- Setup DIR ------# #DIR Config 1 # Input source: RX2 - S/PDIF RCA (default) #w E0 0D 01 # Input source: RX4 - S/PDIF optical, RX_MUX = RX1 w E0 0D 08 #DIR Config 2 - default w E0 0E 01 #----- Setup DIT -----# # DIT COnfig 1 # Port A data in, DIv 256 w E0 07 80 # DIT Config 2 # Default is to output to RCA # Commment out RCA and uncomment Optical for optical outputs #Output to RCA # TX - ON, TX MUTE - ON, Optical disabled #w E0 08 06 # TX Mute - OFF #w E0 08 04 #Output to Optical # TX - OFF, TX MUTE - ON, optical disabled w E0 08 03 # TX MUTE - OFF w E0 08 01 SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 7 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com #----- PLL Configuration -----# # Set P=2, J=8, D=0 w E0 0F 22 w E0 10 1B w E0 11 A3 # GPIO1 Config # GPIO1 = RCVR non-audio data w E0 1B 06 # GPIO2 Config # GPIO2 = RCVR non-valid data w E0 1C 07 # Power Status # Disable RCVR (/PDRX) and Port B(/PDPB) power down and enable All Function power down #w E0 01 14 # Unmute Port A Output w E0 03 29 # Disable All Function power down (all blocks set by local control) w E0 01 3F NOTE: Forcharacteristicperformancegraphs,refertothePCM510xdatasheet. 8 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com CodecControlSoftware 3 CodecControl Software ThissectionexplainshowtousetheCodecControlsoftwaretogetherwiththePCM510xdevice.Whilethe PCM510xisonlyhardware-programmable,theCodecControlsoftwareisrequiredtoproperlyconfigurethe PCM510xEVM-Ufordifferentusecases,suchasoptical,SPDIF,andcoaxialinputtothedevice. 3.1 Control Software TheCodecControlsoftwareexposesmostofthefeaturesofasupportedTIaudiocodecEVMthroughan intuitivegraphicaluserinterface. Figure3 illustratestheCodecControlsoftwarewiththePCM510xEVM-Uwindowasanexampleofthe CodecControlsoftwareinoperation. Figure3.EVMSoftwareWindow SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 9 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

CodecControlSoftware www.ti.com 3.2 Installation DownloadtheCodecControlsoftwarefromthePCM510xEVM-Uaudiocodecproductfolderandlaunch theprogram.Thefileisaself-extractingarchivethatisdownloadedinacompressedformat. Thedefaulttargetfolderis: C:\ProgramFiles\TexasInstruments\CodecControl ClicktheUnzip buttontocompletetheinstallation.TheCodecControlsoftwareisnowavailableinthe targetfolder.Thenameoftheexecutableis CodecControl.exe. TolaunchtheCodecControlsoftware,navigatetothetargetfolderanddouble-clicktheCodecControl.exe file. 3.3 Concepts TheCodecControlsoftwarepresentsablockdiagramviewofasupportedTIaudiocodecEVM,suchas thatshowninFigure3. Theblockdiagramconsistsofactiveobjectsthatrespondtouserinput(forexample,switchesor amplifierswithvariablegainthatshowavolumecontrolwhenauserclicksonthecomponentwitha mouse). NOTE: ActiveObjects:Eachactiveobjectchangescolortoredifthecursorisplacedoverthe object.Clickingtheobjecttriggersitsfunction. Someactiveobjectsarelinkedtocontrolregister(s)oftheparticularTIaudiocodec.TheCodecControl softwareupdatestheappropriateregister(s)wheneveranactiveobjectistriggered.Ifaregisterthatis linkedtoanactiveobjectischangedthroughothercomponents(forexample,thescriptinterpreterorthe registerinspector),theactiveobjectchangesitsstateaccordingly. TheCodecControlsoftwareautomaticallydetectsasupportedTIaudiocodecEVMonceitisconnectedto anavailableUSBportofthePC. IfnoTIaudiocodecEVMisconnectedtothePC,thecontrolsoftwarealsosupportsanEVMsimulation mode,whereitispossibletoretrievescriptcommandsbasedonuserinputwithintheblockdiagram. SimulationmodeisonlyavailableifnoTIaudiocodecEVMisattachedtothePC.Choose File->New EVMsimulation…andselectanEVMfromthelistofsupportedTIaudiocodecEVMs. 3.4 Dialogs and Active Objects TheCodecControlsoftwarecontainsseveraldialogwindowsthatprovideaccesstoadditionalfeatures. Mostdialogsarelinkedtoactiveobjectsandareopenedbyclickingontheactiveobject. SeveraldialogsarenotlinkedtoactiveobjectsandareopenedinsteadusingtheViewmenu. 3.4.1 InitializationScriptDialog TheCodecControlsoftwareexecutesaninitializationscriptwhenasupportedTIaudiocodecisdetected. Toshoworedittheinitializationscript,choose View->InitScript…fromthemainwindowmenubar. ClicktheRunbuttontorunthescriptagain. 10 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com CodecControlSoftware 3.4.2 CommandDialog Openthecommanddialog(View->Command…)towrite,edit,load,save,andruncommandscripts. CommandscriptsaretextfilesthatcontaincommandstocommunicatewiththeTIaudiocodec.The syntaxisdescribedinSection3.5.ThecommanddialogisshowninFigure4. Figure4.CommandDialog • Theprimaryareaofthecommanddialogisthecommandbuffer(editabletext)whichcontainsthe commandscript.Torunthecommandscript,clickthe Runbutton • Thesmaller,read-onlytextareaontherightsideofthecommanddialogdisplayscontroldataread fromtheTIaudiocodec.The ClearbuttonclearstheReadDatafield. • Theone-linetexteditfieldontheleftbottomallowssinglecommandexecution. • TheRecordcheckboxenablesrecordingofcommandsgeneratedbythecontrolsoftware. SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 11 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

CodecControlSoftware www.ti.com 3.4.3 RegisterInspector Theregisterinspectordialog(View->RegisterInspector…)givesaccesstoallregistersoftheTIaudio codec.TheregisterinspectordisplaysthecontentoftheconnectedTIaudiocodecdeviceregisters.To triggerreadingthecontentofonepage,clicktheRefreshbutton. • Theaddrcolumnshowstheaddressoftheregistersindecimalnotation. • Thedescriptioncolumncontainsadescriptionforeachregister.Iftheregisterhasnofunction assigned,itisdeclaredReserved. • Thedatacolumnsshowthedataofeachregister(onebyte).Thefirstdatacolumnusesdecimal notation,andtheseconduseshexadecimalnotation.Itispossibletochangetheregistervalueby clickingintooneofthedatafieldsandtypingthenewvalue(eitherdecimalorhexadecimal). • Thenumberedcolumnsshowtheregistercontentinbinarynotation.Read/writebitsareshownsolid blackorred;read-onlybitsaregrayordarkred.Rednumbersrepresentbitsthatrecentlychanged.To changeasinglewritablebit,clickonthebitanditwillflip. Thecoefficientsmaybeusedforaspecificcustomerfilterimplementation.Theformatiscompatiblewith theTIaudiocodecthatwasdetectedbytheCodecControlsoftware. NOTE:ForthePCM510x,whicharehardwareprogrammableonly,thisfeatureisnotused. 3.4.4 FirmwareUpdate TImaypublishnewfirmwareforTIaudiocodecEVMs.ToprogramthenewfirmwaretoaTIaudiocodec EVM,chooseFile->UpdateFirmware…andselectthenewfirmwarefile. Theupdateprocesstakesafewseconds(thereisnoprogressbar)andiscompletedoncetheupdate firmwaredialogdisappears.TheEVMmustbedisconnectedandreconnectedtofinishthefirmware updateprocess. 3.5 Script Syntax Ascriptisatextfilethatcontainsdatatosendtoadevice. Eachlineinascriptfileisonecommand.Noprovisionismadeforextendinglinesbeyondoneline,except forthe> command.Alineisterminatedbyacarriagereturn. Thefirstcharacterofalineisthecommand.Commandsare: r Readfromtheserialcontrolbus w Writetotheserialcontrolbus > Extendrepeatedwritecommands # Comment I Setinterfacebustouse b Break d Delay f WaitforFlag Command: r<address><register><length> <address>isthedeviceaddressinhexadecimalformat.Forexample,30fordeviceaddress0x30. <register> istheregisterinhexadecimalformatthatwillbereadfrom. <length> isthenumberofbytesthatwillbereadfrom <register>inauto-incrementmode. Theresultwillbedisplayedintheright-sideoutputwindowofthecommandinterpreterdialog. Command: w<address><register><data...> <address>isthedeviceaddressinhexadecimalformat.Forexample,30fordeviceaddress0x30. <register> istheregisterinhexadecimalformatthatwillbewrittento. <data…>isasequenceofbytesthatwillbewrittentothe <register> inauto-incrementmode.Each byteisinhexadecimalformat. 12 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com CodecControlSoftware Command: ><data...> Thiscommandcontinuesawritesequenceinanewline. <data…>isasequenceofbytesthatwillbewritteninauto-incrementmode.Eachbyteisin hexadecimalformat. Command: #[optionalcomment] Thiscommandindicatesacomment. Command: I<interface> <interface> isi2cforI2CorspiforSPI Command: b[optionalcomment] [optionalcomment]isastringofcharacters.Thecommandinterpreterwillshowamodaldialogwith theoptionalcomment.Scriptexecutionwillresumeoncethedialogisclosed. Command: d<time> Thiscommandsuspendsscriptexecutionbyatleast <time>milliseconds. Command: f<address><register><mask>[optionaltimeout] Thiscommandssuspendsscriptexecutionuntilthevaluereadfrom <address><register> matches <mask> <address>isthedeviceaddressinhexadecimalformat.Forexample,30fordeviceaddress0x30. <register> istheregisterinhexadecimalformatthatwillbereadfrom. <mask>isa8-bitbinaryformatmaskthatiscomparedwiththedatafromthedevice.Eachbitcanbe 0,1,orX. Forexample:<mask>=010XX01Xtests,ifthedatafromthedevicehasD7=0,D6=1,D5=0,D4= don’tcare,D3=don’tcare,D2=0,D1=1,D0=don’tcare. [optionaltimeout]specifieshowlong(milliseconds)thecommandinterpreterwillpollthedeviceifthe datadonotmatchthe <mask> SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 13 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com 4 PCM510xEVM-U 4.1 PCM510xEVM-U Schematics Figure5 throughFigure7 showtheschematicsforthePCM5122EVM-U. GPIO4 TP1 TP6 TP11 GPIO5 White TP2 White TP7 White TP12 W2 White TP3 White TP8 White TP13 White TP4 White TP9 White TP14 MC 1 2 3 White TP5 White TP10 White TP15 SCL 10W0L1S 1 W3 2 GPIO4/GPIO4/MAST White White White 3 4 GPIO5/GPIO5/ATT0 MOSI 1 2 3 5 6 MC/SCL/ATT1 U1 SDA 7 8 MOSI/SDA/ATT2 GPIO3 100LS 9 10 GPIO3/GPIO3/AGNS GPIO2 11 12 GPIO2/ADR2/DOUT 15 14 MODE1 13 14 MODE1 MODE2 15 16 MS/MODE2/MODE2 16 13 GPIO6 17 18 GPIO6/GPIO6/FLT SCK 19 20 SCK 17 12 BCK_SRC 21 22 BCK DIN_SRC 23 24 DIN 18 11 LRCK_SRC 25 26 LRCK R0 MISO 27 28 MISO/ADR1/FMT 19 10 100K60/53% XSMT 29 30 XSMT R010640003K R016040013K R10064002K3 R010640033K R016040043K R016040053K R106040063K R010640073K R016040083K R016040093K R016050003K R016050013K R016050023K R016050033K R01605004K3 2201 89 00C8.160u5fd/X170R0V + C1V0S7u-fBd/D16+VNA3G.3PNVAD 470R06/0153%WhiteTP16C12 12SignalJ1 Shield AGND 22 7 02620030pfXd7/5R0VAGND RCRAERDA-F 23 6 AGND 24 5 TP17 J2 NTWADHLOHULITSEITEGNB:NOOUASAPLERTLDDIDOWSEUNIVTPIHSCPEODSERVTWISCITMEHSUPLWITNIITP#HL1EFINEDWEPVERIROCPEPESINRUSLN,OSDCOEAMRTETIOEPNSINT.P(DAUDTS).WILLBEUNUSED. A+DDG3.NNN3VDPPA++ CV1V1C00SS31uu--fBfBdd//1166VV 0000CC..88112400uu55ffdd//XX117700RR00VV 22225678 TSSOP28-PW 1234 C028.820u5fd/X275RV C00C028.8.192100uu505ffdd/X/X127705RR0VV + C1V0DS1u-N1fBdP/A1+6G3VN.3DVA 470R06/0253%WhitAeGNC02D62100330pfXd7/5R0VAGND12SignRaCWlAhRitAe-FShield PCM5100PW NOPIN NOPIN NOPIN NOPIN NOPIN NOPIN PCM5101PW NOPIN NOPIN NOPIN NOPIN NOPIN NOPIN PCM5102PW NOPIN NOPIN NOPIN NOPIN NOPIN NOPIN (HARDWAREMODESSHOWN) NOPIN NOPIN NOPIN NOPIN NOPIN NOPIN 11 FLT VCOM 10 11 FLT VCOM 10 11 FLT VCOM 10 12 SCK AGND 9 12 SCK AGND 9 12 SCK AGND 9 13 BCK AVDD 8 13 BCK AVDD 8 13 BCK AVDD 8 14 DIN OUTR 7 14 DIN OUTR 7 14 DIN OUTR 7 15 LRCK OUTL 6 15 LRCK OUTL 6 15 LRCK OUTL 6 16 FMT VNEG 5 16 FMT VNEG 5 16 FMT VNEG 5 17 XSMT CAPM 4 17 XSMT CAPM 4 17 XSMT CAPM 4 18 LDOO CPGND 3 18 LDOO CPGND 3 18 LDOO CPGND 3 19 DGND CAPP 2 19 DGND CAPP 2 19 DGND CAPP 2 20 DVDD CPVDD 1 20 DVDD CPVDD 1 20 DVDD CPVDD 1 PCM5100 PCM5101 PCM5102 Figure5.PCM510xEVM-USchematic 14 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U POWER USBCONTROLER +5V ++15..80VV OUSUBTPINUPTUT U2 +1.8V TP18 TAS1020B EEPUR5OM +3.3V C22 +3.3V +3.3V GND01C8010u5f4d/1X67VR GND00C6.110u35fdX/570RV GNDR016030K3/5%123 TSP1OS.87TV32/6341008D0DmBBVAV5T 45GND01C0810u5f6d/1X67VR RED GND1234 pm/nfg:S:2OM45FIIC1CC28R5K-O1S2MC-IH/SIPM5678 00.610u3fdX/570RV GND R026.870K3/5% R026.970K3/5% SSCDLA +5V MCLK +5V +5.0V USBINPUT U3 +3.3V TP19 Y1 GND01C8010u+5f7d/31X67.V3RVGNODU00C6.T110u38PfdX/U570RTV GND+5VR016040K3/1235%TSP3OS.37TV32/6343003D0DmBBVAV5T 45GND01C0810u5f9d/1X67VR RED USBINPUT 1006000C3p2fdC4/O5100G08V00Cp5f2dC/35O0GV3R0.6010903KC25 +3+G.33NV.3DVp/n:SI21T80m0GO6S2MfENMgAHD:TI-Sz-1218/Oi33T0V.U-I03c3M2VTc3EE-346.00000+T34.83V474G6N4D54443424140 393837 3365 WBDCICNLLKK +G3N.3DV00C6.120u30f++dX/53370R..V33VVA OUUSRTBG5PNIUNDTPUT321 TSPOST225U354-3DDBBVV6R 654DMUETA10R0613S006CK3U1UW0G0R4NRLSDER24MEENNTT++A3G.3NVDK1CA0Z20u1TfdP/520R0VED GND11987610NNCCCCCCaaaasssseeee USBJM3INIBIDDDG_aaNNtta5aDC+v-54321 +G5VND 1RRR00022.6665771110000..14423333K 04C7620p3f6d/5C0OVG GN40CD6720p3f7d/5C000O.6V1G0u3fd+X/5370R.V3V00C6.120u38fdX/570RVGND 3485679111102 1314T1A5S11T6Q0F1P724081-PB8FBP19FB20 21222324 33222233234256790183 GND +G3N.3DV 00.61C0u3f3d((X//S15S70CRSVKLfoGfroNTrDATSA-SA-IACIC)) MOMMDOIMSESCO1I 100K60/53% GND GND GND GND (SPI_SELECTforTAS-AIC) MODE2 +3.3V GND GPIO5 R14 D1 GPIO4 0160003K Yello0w80/25.0V +3.3V +3.3V GPIO3 GROUNDTP21 TP22 TP23 TP24 TP25 TP26 C016.200u93fd/X176RV +3.3VGPR0L66410E953D0 00C6.130u30fdX/570RV R01C6010K363/25% GEV1PQS-5IWOP2N2004K Black Black Black Black Black Black GND GND 006.10u3fdX/570RV GND R7 GND GND 12060.10/4W AGND /RESET +3.3V RESET R016010K73/5% 1SW12 C33 EVQ-5PN04K MOUNTINGHARDWARE 006.10u3fdX/570RV GND M3x8 M3x8 GND M3 M3 GPIO2 M3x25 M3x25 M3x25 M3x25 M3 M3 M3x8 M3x8 GPIO6 STANDOFFS WASHERS SCREWS XSMT Figure6.PCM510xEVM-UPowerandUSBController SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 15 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com I2SFROMTAS1020B SAMPLERATECONVERTER TP27 TP28 TP29 TP30 TP31 TP32 DINWhite White White White White White I2STO I2S BWCCLLKK PCM5102 SCL DIN_SRC I2C SDA LRCK_SRC RESET /RESET BCK_SRC +3.3V C49 SPDIFINPUTS GND 00.610u3fdX/570RV +3.3V 120R16011.08/4W C34 C35 21 GVCNCDJ4 1006u0f3d/6X.35VR 00.16u0f3d/X507VR Case OUT 3 48 47 46 45 44 43 42 41 40 39 38 37 GND PLR135/T10 C44 1 36 75ohms ROJRCr5aAnShieldXRgeA-IFNPSUignTal12 GNDR172510961/4W 0000..6611CC00uu33ff33ddXX//67557700RRVV GND 00.610u3fdX/570RV 234567 SRC4U31922IPFBR 333333034521 +3.3VC00.6410u83fdX/570RV TQFP48-PFB R31 8 29 GND ALTERNATEMCLKSELECTION R25 C40 +3.3V 1201601.0/4W C45 C46 9 28 FORMCLKSOURCESOTHERTHANFROMSRC4392(U12). +3.3V 1201601.0/4W 2028u0Cf5d4/6X1.53RV 1006u0f3d/6X.35VR GN0D0.16u0f3d/X507VR 1110 2267 MU7CLPKINSSE1L,2E,C&T3ION MCLK 321 U8 54 00.610uR3fdX2/5760RVGND MOFRNCOBLMKO#AT1RADS1M02C0LBK RXLOCK GRre3e0Dn82/0225.0V 12 13 14 15 16 17 18 19 20 21 22 23 24 25 MCLK#1 AL LB CL GNDSN74LSVOCT12G3-1D2B5VD5BVR 03630.03 +3.3V 02620.13 GNDGND +G1N.8DV G+N3D.3V GND R046.370K43/5% MMMCCCLHLLL4321KKK==T###DSSA4320WW4SHW0IISTT3BHHLC1CHH8765OLHHOFNOBCAFPLLLE+3N.3R01V6020K03/5% R016020K13/5% R106020K23/5%+G3N.3DR1112345V02C022820.300u365f8d1//6X4.5UW3RV7 11111C23456006.300193ufXd7/2R5V GNDJ6 GN132DSN7S4OLTVU2C312-0DGR17B2502V04466DB1/V4W645GNDGGNND321SDN22117S4SMLSMVGOGO7O7C7EENNSST741YYMM2DD4U5G353277H9-1HOO77DSVV2HHSUUB5VccVTTVDcc--252B42V.4343.55R776549M2M RRR000333666333222000...000987333 ME+M2FM2F243RRXCCC...OOT553LLLE77VMMKKK69RD###M2OON234MBHSSANHzCCLCzMMYYMIC22NCCLPLLKUKKT GND123SN7+43LS.V3OCVST1U2G3R1-11D2CB51VD250BR1R6V031.R00E/+445W3A.3DVY GR0r2e62302e0000D..2n8183361u/030CC02uf553.fd044d/XV/6X235.7503RRVV GND G00C6.N140uD37fdX/570RV +3.3V SWSSRRCS5CCKCMRSESXCKCLCLKEKKC123O10T0WLISO521N--32 GND 6 11 TO 7 10 8 9 PCM5102 GND SNT7S4SLOVCP1163-8PAWPW Figure7.PCM510xEVM-UDigitalI/OandSource 16 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U 4.2 PCM510xEVM-U Printed-Circuit Board (PCB) Layouts Figure9 throughFigure13illustratethePCM510xEVM-UPCBlayouts. Figure8.PCM5102EVM-URevisionBTopComposite Figure9.PCM5102EVM-URevisionBTopCopper SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 17 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com Figure10.PCM5102EVM-URevisionBCopperLayer2 Figure11.PCM5102EVM-URevisionBCopperLayer3 18 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U Figure12.PCM5102EVM-URevisionBBottomCopper Figure13.PCM5102EVM-URevisionBBottomComposite SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 19 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

PCM510xEVM-U www.ti.com 4.3 PCM510xEVM-U Bill of Materials Table3istheBOMforthePCM510xEVM-U. Table3.PCM5102xEVM-UBillofMaterialsRevC(1)(2)(3) Item MFGPartNumber MFG QTY RefDesignators Description 1 PCM5102APW TEXASINSTRUMENTS 1 U1 24-BIT384KHzAUDIOSTEREODACw/MINIDSPTSSOP20-PWROHS 2 TPS73618DBVT TEXASINSTRUMENTS 1 U2 VOLTREG1.8V400MALDOCAPFREENMOSSOT23-DBV5ROHS 3 TPS73633DBVT TEXASINSTRUMENTS 1 U3 VOLTREG3.3V400MALDOCAPFREENMOSSOT23-DBV5ROHS 4 TPS2553DBV TEXASINSTRUMENTS 1 U4 Adj.,ActiveHigh,Pwr-DistSwitch,SOT23-DBV6,ROHS 5 TAS1020BPFB TEXASINSTRUMENTS 1 U6 USBSTREAMINGCONTROLLERTQFP48-PFBROHS 6 SN74LVC138APWR TEXASINSTRUMENTS 1 U7 3-LINETO8-LINEDECODER/DEMULTIPLEXERTSSOP16-PWROHS 7 SN74LVC1G125DBVR TEXASINSTRUMENTS 3 U8,U9,U11 SINGLEBUSBUFFERGATEWITH3-STATEOUTPUTSOT23-DBV5ROHS 8 SN74LVC2G04DBVR TEXASINSTRUMENTS 1 U10 DUALINVERTERGATESOT23-DBV6ROHS 9 SRC4392IPFBR BURR-BROWN 1 U12 2CHAN,ASYNC,SAMPLERATECONVW/DIGAUDIOREC/XMTRROHS 10 24FC512-I/SM MICROCHIP 1 U5 512K(64Kx8)I2CSERIALEEPROMSOIC8-SMROHS 11 PLR135/T10 EVERLIGHTELECTRONICS 1 J4 PHOTOLINKFIBEROPTICRECEIVER2.4-5.5V15MBPCB-RASHUTTERROHS 12 SML-LXT0805YW-TR LUMEXOPTO 1 D1 LED,YELLOW2.0VSMD0805ROHS 13 SML-LXT0805GW-TR LUMEXOPTO 2 D2,D3 LED,GREEN2.0VSMD0805ROHS 14 SIT8002AI-13-33E-6.00000T SITIME 1 Y1 OSCILLATORSMT6MHz3.3VOUT-ENABLEROHS 15 SM7745HSV-22.5792M PLETRONICS 1 Y2 OSCILLATORSMT3.3VSM77HSERIES22.5792MHzROHS 16 SM7745HSV-24.576M PLETRONICS 1 Y3 OSCILLATORSMT3.3VSM77HSERIES24.576MHzROHS 17 EEE1CA100SR PANASONIC 0 C1,C3,C7,C11 CAPSMDELECT10ufd16V20%VS-BROHS 18 C2012X7R2A104K TDK 4 C2,C4,C6,C10 CAPSMD0805CERM0.1UFD100V10%X7RROHS 19 GCM21BR71E225KA73L MURATA 2 C8,C9 CAPSMD0805CERM2.2UFD25V10%X7RROHS 20 GRM188R71H222KA01D MURATA 2 C12,C13 CAPSMD0603CERM2200PFD50V10%X7RROHS 21 GRM21BR61C106KE15L MURATA 4 C14,C16,C17,C19 CAPSMD0805CERM10UFD16V10%X5RROHS 22 C1608X7R1H104K TDK 20 C15,C18,C20,C22,C25,C28,C30,C31,C32, CAPSMD0603CERM0.1UFD50V10%X7RROHS C33,C35,C36,C37,C41,C43,C44,C46,C47, C48,C49 23 UKZ1E101MPM NICHICON 1 C21 CAPALUMELECKZRADIAL100UFD50V20%ROHS 24 GRM2165C1H101JA01D MURATA 1 C23 CAPSMD0805CERM100PFD50V5%C0GROHS 25 C1608C0G1H102J TDKCORP. 1 C24 CAPSMD0603CERM1000PFD50V5%COGROHS 26 GRM1885C1H470JA01D MURATA 2 C26,C27 CAPSMD0603CERM47PFD50V5%COGROHS 27 C1608X7R1C105K TDK 1 C29 CAPSMD0603CERM1.0UFD16V10%X7RROHS 28 GRM188R60J106ME47D MURATA 2 C34,C45 CAPSMD0603CERM10UFD6.3V20%X5RROHS 29 C2012X5R0J226M TDK 3 C38,C40,C42 CAPSMD0805CERM22UFD6.3V20%X5RROHS 30 06031C103JAT2A AVX 1 C39 CAPSMD0603CERM0.01UFD25V5%X7RROHS 31 ERJ-3GEYJ103V PANASONIC 9 R0,R3,R4,R5,R16,R17,R20,R21,R22 RESISTORSMD060310K5%1/10WROHS 32 ERJ-3GEYJ471V PANASONIC 2 R1,R2 RESISTORSMD0603470OHMS5%1/10WROHS (1) TheseassembliesareESDsensitive,observeESDprecautions. (2) Theseassembliesmustbecleanandfreefromfluxandallcontaminants.Useofno-cleanfluxisnotacceptable. (3) TheseassembliesmustcomplywithworkmanshipstandardsIPC-A-610Class2. 20 PCM510xEVM-U SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

www.ti.com PCM510xEVM-U Table3.PCM5102xEVM-UBillofMaterialsRevC(1)(2)(3) (continued) Item MFGPartNumber MFG QTY RefDesignators Description 33 ERJ-3EKF1003V PANASONIC 17 R6,R14,R40,R41,R42,R43,R44,R45,R46, RESISTORSMD0603100KOHM1%THICKFILM1/10WROHS R47,R48,R49,R50,R51,R52,R53,R54 34 ERJ-8GEY0R00V PANASONIC 1 R7 RESISTORSMD12060.0OHM5%1/4WROHS 35 ERJ-3GEYJ272V PANASONIC 2 R8,R9 RESISTORSMD06032.7KOHMS5%1/10WROHS 36 ERJ-3EKF3091V PANASONIC 1 R10 RESISTORSMD06033.09KOHM1%THICKFILM1/10WROHS 37 ERJ-3EKF1501V PANASONIC 1 R11 RESISTORSMD06031.50KOHM1%THICKFILM1/10WROHS 38 ERJ-3EKF27R4V PANASONIC 2 R12,R13 RESISTORSMD060327.4OHMS1%1/10WROHS 39 RC0603FR-07649RL YAGEO 1 R15 RESISTORSMD0603THICKFILM649OHMS1%1/10WROHS 40 ERJ-8ENF10R0 PANASONIC 5 R18,R23,R25,R30,R31 RESISTORSMT120610.0OHM1%1/4WROHS 41 MCR18EZPF75R0 ROHMSEMICONDUCTOR 2 R19,R24 RESISTORSMD120675OHMs1%1/4WROHS 42 ERJ-3EKF33R0V PANASONIC 4 R26,R27,R28,R29 RESISTORSMD060333.0OHMS1%1/10WROHS 43 CRCW060322R1FKEA VISHAY 2 R32,R33 RESISTORSMD060322.1OHMS1%1/10WROHS 44 ERJ-3GEYJ472V PANASONIC 1 R34 RESISTORSMD06034.7KOHMS5%1/10WROHS 45 RCJ-042 CUISTACK 1 J1 RCAJACKTHRURA-FEMALEREDROHS 46 RCJ-043 CUISTACK 1 J2 RCAJACKTHRURA-FEMALEWHITEROHS 47 UX60-MB-5ST HIROSE 1 J3 JACKUSBMINIBSMT-RA5PINROHS 48 RCJ-047 CUISTACK 1 J5 RCAJACKTHRURA-FEMALEORANGEROHS 49 5227699-2 TYCOELECTRONICS 1 J6 JACKBNCSQUARE50OHMSROHS 50 PBC03SAAN SULLINS 3 W1,W2,W5 HEADERTHRUMALE3PIN100LS120TAILGOLDROHS 51 PBC15DAAN SULLINS 1 W3 HEADERTHRUMALE2X15100LS120TAILGOLDROHS 52 PBC02DAAN SULLINS 1 W4 HEADERTHRUMALE2X2PIN100LS120TAILGOLDROHS 53 5002 KEYSTONEELECTRONICS 23 TP1,TP2,TP3,TP4,TP5,TP6,TP7,TP8,TP9, PCTESTPOINT,WHITE,ROHS TP10,TP11,TP12,TP13,TP14,TP15,TP16, TP17,TP27,TP28,TP29,TP30,TP31,TP32 54 5000 KEYSTONEELECTRONICS 3 TP18,TP19,TP20 PCTESTPOINT,RED,ROHS 55 5011 KEYSTONEELECTRONICS 6 TP21,TP22,TP23,TP24,TP25,TP26 PCTESTPOINTBLACK063HOLEROHS 56 EVQ-5PN04K PANASONIC 2 SW1,SW2 SWITCHMOM240GSMD6x3.5MMROHS 57 TDA04H0SB1 CKCOMPONENTS 1 SW3 SWITCHSMTDIP84POSROHS 58 95947A018 MCMASTER-CARR 4 STANDOFFS STANDOFFM3x25mm4.5mmDIAHEXALUMF-FROHS 59 92148A150 MCMASTER-CARR 4 STANDOFFWASHERS WASHERSPLIT-LOCKM36.2mmOD0.7mmTHICKSTAINLESSSTEELROHS 60 92000A118 MCMASTER-CARR 4 STANDOFFSCREWS SCREWM3x8PHILIPSPANHEADSTAINLESSSTEELROHS 61 969102-0000-DA 3M 4 W1(2-3),W2(2-3),W4(1-2),W5(1-2) SHUNTBLACKAUFLASH0.100LSOPENTOPROHS 62 969102-0000-DA 3M 12 W3:1-2,3-4,5-6,7-8,9-10,15-16,17-18,19-20, SHUNTBLACKAUFLASH0.100LSOPENTOPROHS 21-22,23-24,25-26,29-30 TOTAL 186 X1 DONOTPOPULATE 4 C1,C3,C7,C11 SBAU190C–May2011–RevisedOctober2014 PCM510xEVM-U 21 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

RevisionHistory www.ti.com Revision History ChangesfromBRevision(June2014)toCRevision .................................................................................................... Page • ChangedlastsentenceinthefirstparagraphoftheIntroduction................................................................... 2 • ChangedlinktoPCM510xdatasheet. ................................................................................................ 2 • ChangedfirstparagraphinScriptsandSetupsection............................................................................... 7 • DeletedsecondparagraphinScriptsandSetupsection............................................................................. 7 • DeletedUSBPlaybacksection.......................................................................................................... 7 • ChangedlastsentenceinthefirstparagraphoftheCodecControlSoftwaresection............................................ 9 • DeletedNOTE:intheControlSoftwaresection....................................................................................... 9 • AddedPCM510xEVM-UPrinted-CircuitBoard(PCB)Layoutssection........................................................... 17 • ChangedtitleoftheBOMtoPCM5102xEVM-UBillofMaterialsRevC. ........................................................ 20 • ChangedPCM5102PWtoPCM5102APWthethefirstrowoftheBOM......................................................... 20 NOTE:Pagenumbersforpreviousrevisionsmaydifferfrompagenumbersinthecurrentversion. 22 RevisionHistory SBAU190C–May2011–RevisedOctober2014 SubmitDocumentationFeedback Copyright©2011–2014,TexasInstrumentsIncorporated

STANDARDTERMSANDCONDITIONSFOREVALUATIONMODULES 1. Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively,an “EVM”or “EVMs”)totheUser (“User”)inaccordancewith thetermsandconditions setforthherein. AcceptanceoftheEVMisexpresslysubjecttothefollowingtermsandconditions. 1.1 EVMsareintendedsolelyforproductorsoftwaredevelopersforuseinaresearchanddevelopmentsettingtofacilitatefeasibility evaluation, experimentation, or scientific analysis of TI semiconductors products. EVMs have no direct function and are not finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product. For clarification,anysoftwareorsoftwaretoolsprovidedwiththeEVM(“Software”)shallnotbesubjecttothetermsandconditions setforthhereinbutrathershallbesubjecttotheapplicabletermsandconditionsthataccompanysuchSoftware 1.2 EVMsarenotintendedforconsumerorhouseholduse.EVMsmaynotbesold,sublicensed,leased,rented,loaned,assigned, or otherwise distributed for commercial purposes by Users, in whole or in part, or used in any finished product or production system. 2 LimitedWarrantyandRelatedRemedies/Disclaimers: 2.1 ThesetermsandconditionsdonotapplytoSoftware.Thewarranty,ifany,forSoftwareiscoveredintheapplicableSoftware LicenseAgreement. 2.2 TIwarrantsthattheTIEVMwillconformtoTI'spublishedspecificationsforninety(90)daysafterthedateTIdeliverssuchEVM toUser.Notwithstandingtheforegoing,TIshallnotbeliableforanydefectsthatarecausedbyneglect,misuseormistreatment byanentityotherthanTI,includingimproperinstallationortesting,orforanyEVMsthathavebeenalteredormodifiedinany waybyanentityotherthanTI.Moreover,TIshallnotbeliableforanydefectsthatresultfromUser'sdesign,specificationsor instructions for such EVMs. Testing and other quality control techniques are used to the extent TI deems necessary or as mandatedbygovernmentrequirements.TIdoesnottestallparametersofeachEVM. 2.3 IfanyEVMfailstoconformtothewarrantysetforthabove,TI'ssoleliabilityshallbeatitsoptiontorepairorreplacesuchEVM, or credit User's account for such EVM. TI's liability under this warranty shall be limited to EVMs that are returned during the warrantyperiodtotheaddressdesignatedbyTIandthataredeterminedbyTInottoconformtosuchwarranty.IfTIelectsto repairorreplacesuchEVM,TIshallhaveareasonabletimetorepairsuchEVMorprovidereplacements.RepairedEVMsshall bewarrantedfortheremainderoftheoriginalwarrantyperiod.ReplacedEVMsshallbewarrantedforanewfullninety(90)day warrantyperiod. 3 RegulatoryNotices: 3.1 UnitedStates 3.1.1 NoticeapplicabletoEVMsnotFCC-Approved: Thiskitisdesignedtoallowproductdeveloperstoevaluateelectroniccomponents,circuitry,orsoftwareassociatedwiththekit todeterminewhethertoincorporatesuchitemsinafinishedproductandsoftwaredeveloperstowritesoftwareapplicationsfor usewiththeendproduct.Thiskitisnotafinishedproductandwhenassembledmaynotberesoldorotherwisemarketedunless all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is designedtooperateunderpart15,part18orpart95ofthischapter,theoperatorofthekitmustoperateundertheauthorityof anFCClicenseholderormustsecureanexperimentalauthorizationunderpart5ofthischapter. 3.1.2 ForEVMsannotatedasFCC–FEDERALCOMMUNICATIONSCOMMISSIONPart15Compliant: CAUTION Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operatetheequipment. FCCInterferenceStatementforClassAEVMdevices NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttopart15of theFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentis operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredto correcttheinterferenceathisownexpense. SPACER SPACER SPACER SPACER SPACER SPACER SPACER SPACER

FCCInterferenceStatementforClassBEVMdevices NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance withtheinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterference willnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,which canbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore ofthefollowingmeasures: • Reorientorrelocatethereceivingantenna. • Increasetheseparationbetweentheequipmentandreceiver. • Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. • Consultthedealeroranexperiencedradio/TVtechnicianforhelp. 3.2 Canada 3.2.1 ForEVMsissuedwithanIndustryCanadaCertificateofConformancetoRSS-210 ConcerningEVMsIncludingRadioTransmitters: ThisdevicecomplieswithIndustryCanadalicense-exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may causeundesiredoperationofthedevice. ConcernantlesEVMsavecappareilsradio: LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitation estautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoit acceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement. ConcerningEVMsIncludingDetachableAntennas: UnderIndustryCanadaregulations,thisradiotransmittermayonlyoperateusinganantennaofatypeandmaximum(orlesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listedintheuserguide with themaximumpermissible gainandrequiredantennaimpedance for eachantennatypeindicated. Antennatypesnotincludedinthislist,havingagaingreaterthanthemaximumgainindicatedforthattype,arestrictlyprohibited forusewiththisdevice. ConcernantlesEVMsavecantennesdétachables Conformémentàlaréglementationd'IndustrieCanada,leprésentémetteurradiopeutfonctionneravecuneantenned'untypeet d'ungainmaximal(ouinférieur)approuvépourl'émetteurparIndustrieCanada.Danslebutderéduirelesrisquesdebrouillage radioélectriqueàl'intentiondesautresutilisateurs,ilfautchoisirletyped'antenneetsongaindesortequelapuissanceisotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le manueld’usageetayantungainadmissiblemaximaletl'impédancerequisepourchaquetyped'antenne.Lestypesd'antenne noninclusdanscetteliste,oudontlegainestsupérieuraugainmaximalindiqué,sontstrictementinterditspourl'exploitationde l'émetteur 3.3 Japan 3.3.1 NoticeforEVMsdeliveredinJapan:Pleaseseehttp://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page日本国内に 輸入される評価用キット、ボードについては、次のところをご覧ください。 http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page 3.3.2 NoticeforUsersofEVMsConsidered“RadioFrequencyProducts”inJapan:EVMsenteringJapanareNOTcertifiedby TIasconformingtoTechnicalRegulationsofRadioLawofJapan. IfUserusesEVMsinJapan,UserisrequiredbyRadioLawofJapantofollowtheinstructionsbelowwithrespecttoEVMs: 1. Use EVMs in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for EnforcementofRadioLawofJapan, 2. Use EVMs only after User obtains the license of Test Radio Station as provided in Radio Law of Japan with respect to EVMs,or 3. UseofEVMsonlyafterUserobtainstheTechnicalRegulationsConformityCertificationasprovidedinRadioLawofJapan withrespecttoEVMs.Also,donottransferEVMs,unlessUsergivesthesamenoticeabovetothetransferee.Pleasenote thatifUserdoesnotfollowtheinstructionsabove,UserwillbesubjecttopenaltiesofRadioLawofJapan. SPACER SPACER SPACER SPACER SPACER

【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 本開発キットは技術基準適合証明を受けておりません。 本製品のご使用に際しては、電波法遵守のため、以下のいずれかの措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・インスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 NoticeforEVMsforPowerLineCommunication:Pleaseseehttp://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER 4 EVMUseRestrictionsandWarnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITEDTOEVALUATIONSOFLIFESUPPORTAPPLICATIONS. 4.2 UsermustreadandapplytheuserguideandotheravailabledocumentationprovidedbyTIregardingtheEVMpriortohandling orusingtheEVM,includingwithoutlimitationanywarningorrestrictionnotices.Thenoticescontainimportantsafetyinformation relatedto,forexample,temperaturesandvoltages. 4.3 Safety-RelatedWarningsandRestrictions: 4.3.1 UsershalloperatetheEVMwithinTI’srecommendedspecificationsandenvironmentalconsiderationsstatedintheuser guide,otheravailabledocumentationprovidedbyTI,andanyotherapplicablerequirementsandemployreasonableand customarysafeguards.Exceedingthespecifiedperformanceratingsandspecifications(includingbutnotlimitedtoinput and output voltage, current, power, and environmental ranges) for the EVM may cause personal injury or death, or property damage. If there are questions concerning performance ratings and specifications, User should contact a TI fieldrepresentativepriortoconnectinginterfaceelectronicsincludinginputpowerandintendedloads.Anyloadsapplied outside of the specified output range may also result in unintended and/or inaccurate operation and/or possible permanentdamagetotheEVMand/orinterfaceelectronics.PleaseconsulttheEVMuserguidepriortoconnectingany load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative. During normal operation, even with the inputs and outputs kept within the specified allowable ranges, some circuit componentsmayhaveelevatedcasetemperatures.Thesecomponentsincludebutarenotlimitedtolinearregulators, switching transistors, pass transistors, current sense resistors, and heat sinks, which can be identified using the informationintheassociateddocumentation.WhenworkingwiththeEVM,pleasebeawarethattheEVMmaybecome verywarm. 4.3.2 EVMs are intended solely for use by technically qualified, professional electronics experts who are familiar with the dangers and application risks associated with handling electrical mechanical components, systems, and subsystems. UserassumesallresponsibilityandliabilityforproperandsafehandlinganduseoftheEVMbyUseroritsemployees, affiliates,contractorsordesignees.Userassumesallresponsibilityandliabilitytoensurethatanyinterfaces(electronic and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely limit accessible leakage currents to minimize the risk of electrical shock hazard. User assumes all responsibility and liability for any improper or unsafe handling or use of the EVM by User or its employees, affiliates, contractors or designees. 4.4 User assumes all responsibility and liability to determine whether the EVM is subject to any applicable international, federal, state, or local laws and regulations related to User’s handling and use of the EVM and, if applicable, User assumes all responsibility and liability for compliance in all respects with such laws and regulations. User assumes all responsibility and liability for proper disposal and recycling of the EVM consistent with all applicable international, federal, state, and local requirements. 5. AccuracyofInformation:TotheextentTIprovidesinformationontheavailabilityandfunctionofEVMs,TIattemptstobeasaccurate aspossible.However,TIdoesnotwarranttheaccuracyofEVMdescriptions,EVMavailabilityorotherinformationonitswebsitesas accurate,complete,reliable,current,orerror-free. SPACER SPACER SPACER SPACER SPACER SPACER

SPACER 6. Disclaimers: 6.1 EXCEPTASSETFORTHABOVE,EVMSANDANYWRITTENDESIGNMATERIALSPROVIDEDWITHTHEEVM(ANDTHE DESIGN OF THE EVM ITSELF) ARE PROVIDED "AS IS" AND "WITH ALL FAULTS." TI DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, REGARDING SUCH ITEMS, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF ANY THIRDPARTYPATENTS,COPYRIGHTS,TRADESECRETSOROTHERINTELLECTUALPROPERTYRIGHTS. 6.2 EXCEPT FOR THE LIMITED RIGHT TO USE THE EVM SET FORTH HEREIN, NOTHING IN THESE TERMS AND CONDITIONS SHALL BE CONSTRUED AS GRANTING OR CONFERRING ANY RIGHTS BY LICENSE, PATENT, OR ANY OTHERINDUSTRIALORINTELLECTUALPROPERTYRIGHTOFTI,ITSSUPPLIERS/LICENSORSORANYOTHERTHIRD PARTY, TO USE THE EVM IN ANY FINISHED END-USER OR READY-TO-USE FINAL PRODUCT, OR FOR ANY INVENTION, DISCOVERY OR IMPROVEMENT MADE, CONCEIVED OR ACQUIRED PRIOR TO OR AFTER DELIVERY OF THEEVM. 7. USER'S INDEMNITY OBLIGATIONS AND REPRESENTATIONS. USER WILL DEFEND, INDEMNIFY AND HOLD TI, ITS LICENSORSANDTHEIRREPRESENTATIVESHARMLESSFROMANDAGAINSTANYANDALLCLAIMS,DAMAGES,LOSSES, EXPENSES, COSTS AND LIABILITIES (COLLECTIVELY, "CLAIMS") ARISING OUT OF OR IN CONNECTION WITH ANY HANDLINGORUSEOFTHEEVMTHATISNOTINACCORDANCEWITHTHESETERMSANDCONDITIONS.THISOBLIGATION SHALL APPLY WHETHER CLAIMS ARISE UNDER STATUTE, REGULATION, OR THE LAW OF TORT, CONTRACT OR ANY OTHERLEGALTHEORY,ANDEVENIFTHEEVMFAILSTOPERFORMASDESCRIBEDOREXPECTED. 8. LimitationsonDamagesandLiability: 8.1 General Limitations. IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF THESE TERMS ANDCONDITIONS OR THE USE OF THE EVMS PROVIDED HEREUNDER, REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO,COSTOFREMOVALORREINSTALLATION,ANCILLARYCOSTSTOTHEPROCUREMENTOFSUBSTITUTEGOODS OR SERVICES, RETESTING, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OF GOODWILL, LOSS OF PROFITS, LOSSOFSAVINGS,LOSSOFUSE,LOSSOFDATA,ORBUSINESSINTERRUPTION.NOCLAIM,SUITORACTIONSHALL BEBROUGHTAGAINSTTIMORETHANONEYEARAFTERTHERELATEDCAUSEOFACTIONHASOCCURRED. 8.2 SpecificLimitations.INNOEVENTSHALLTI'SAGGREGATELIABILITYFROMANYWARRANTYOROTHEROBLIGATION ARISING OUT OF OR IN CONNECTION WITH THESE TERMS AND CONDITIONS, OR ANY USE OF ANY TI EVM PROVIDED HEREUNDER, EXCEED THE TOTAL AMOUNT PAID TO TI FOR THE PARTICULAR UNITS SOLD UNDER THESETERMSANDCONDITIONSWITHRESPECTTOWHICHLOSSESORDAMAGESARECLAIMED.THEEXISTENCE OF MORE THAN ONE CLAIM AGAINST THE PARTICULAR UNITS SOLD TO USER UNDER THESE TERMS AND CONDITIONSSHALLNOTENLARGEOREXTENDTHISLIMIT. 9. ReturnPolicy.Exceptasotherwiseprovided,TIdoesnotofferanyrefunds,returns,orexchanges.Furthermore,noreturnofEVM(s) willbeacceptedifthepackagehasbeenopenedandnoreturnoftheEVM(s)willbeacceptediftheyaredamagedorotherwisenotin a resalable condition. If User feels it has been incorrectly charged for the EVM(s) it ordered or that delivery violates the applicable order, User should contact TI. All refunds will be made in full within thirty (30) working days from the return of the components(s), excludinganypostageorpackagingcosts. 10. GoverningLaw:ThesetermsandconditionsshallbegovernedbyandinterpretedinaccordancewiththelawsoftheStateofTexas, withoutreferencetoconflict-of-lawsprinciples.Useragreesthatnon-exclusivejurisdictionforanydisputearisingoutoforrelatingto these terms and conditions lies within courts located in the State of Texas and consents to venue in Dallas County, Texas. Notwithstandingtheforegoing,anyjudgmentmaybeenforcedinanyUnitedStatesorforeigncourt,andTImayseekinjunctiverelief inanyUnitedStatesorforeigncourt. MailingAddress:TexasInstruments,PostOfficeBox655303,Dallas,Texas75265 Copyright©2014,TexasInstrumentsIncorporated spacer

IMPORTANTNOTICE TexasInstrumentsIncorporatedanditssubsidiaries(TI)reservetherighttomakecorrections,enhancements,improvementsandother changestoitssemiconductorproductsandservicesperJESD46,latestissue,andtodiscontinueanyproductorserviceperJESD48,latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersandshouldverifythatsuchinformationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas“components”)aresoldsubjecttoTI’stermsandconditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponentstothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’sterms andconditionsofsaleofsemiconductorproducts.TestingandotherqualitycontroltechniquesareusedtotheextentTIdeemsnecessary tosupportthiswarranty.Exceptwheremandatedbyapplicablelaw,testingofallparametersofeachcomponentisnotnecessarily performed. TIassumesnoliabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.TominimizetherisksassociatedwithBuyers’productsandapplications,Buyersshouldprovide adequatedesignandoperatingsafeguards. TIdoesnotwarrantorrepresentthatanylicense,eitherexpressorimplied,isgrantedunderanypatentright,copyright,maskworkright,or otherintellectualpropertyrightrelatingtoanycombination,machine,orprocessinwhichTIcomponentsorservicesareused.Information publishedbyTIregardingthird-partyproductsorservicesdoesnotconstitutealicensetousesuchproductsorservicesorawarrantyor endorsementthereof.Useofsuchinformationmayrequirealicensefromathirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,oralicensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooksordatasheetsispermissibleonlyifreproductioniswithoutalteration andisaccompaniedbyallassociatedwarranties,conditions,limitations,andnotices.TIisnotresponsibleorliableforsuchaltered documentation.Informationofthirdpartiesmaybesubjecttoadditionalrestrictions. ResaleofTIcomponentsorserviceswithstatementsdifferentfromorbeyondtheparametersstatedbyTIforthatcomponentorservice voidsallexpressandanyimpliedwarrantiesfortheassociatedTIcomponentorserviceandisanunfairanddeceptivebusinesspractice. TIisnotresponsibleorliableforanysuchstatements. Buyeracknowledgesandagreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryandsafety-relatedrequirements concerningitsproducts,andanyuseofTIcomponentsinitsapplications,notwithstandinganyapplications-relatedinformationorsupport thatmaybeprovidedbyTI.Buyerrepresentsandagreesthatithasallthenecessaryexpertisetocreateandimplementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresandtheirconsequences,lessenthelikelihoodoffailuresthatmightcause harmandtakeappropriateremedialactions.BuyerwillfullyindemnifyTIanditsrepresentativesagainstanydamagesarisingoutoftheuse ofanyTIcomponentsinsafety-criticalapplications. Insomecases,TIcomponentsmaybepromotedspecificallytofacilitatesafety-relatedapplications.Withsuchcomponents,TI’sgoalisto helpenablecustomerstodesignandcreatetheirownend-productsolutionsthatmeetapplicablefunctionalsafetystandardsand requirements.Nonetheless,suchcomponentsaresubjecttotheseterms. NoTIcomponentsareauthorizedforuseinFDAClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties haveexecutedaspecialagreementspecificallygoverningsuchuse. OnlythoseTIcomponentswhichTIhasspecificallydesignatedasmilitarygradeor“enhancedplastic”aredesignedandintendedforusein military/aerospaceapplicationsorenvironments.BuyeracknowledgesandagreesthatanymilitaryoraerospaceuseofTIcomponents whichhavenotbeensodesignatedissolelyattheBuyer'srisk,andthatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuchuse. TIhasspecificallydesignatedcertaincomponentsasmeetingISO/TS16949requirements,mainlyforautomotiveuse.Inanycaseofuseof non-designatedproducts,TIwillnotberesponsibleforanyfailuretomeetISO/TS16949. Products Applications Audio www.ti.com/audio AutomotiveandTransportation www.ti.com/automotive Amplifiers amplifier.ti.com CommunicationsandTelecom www.ti.com/communications DataConverters dataconverter.ti.com ComputersandPeripherals www.ti.com/computers DLP®Products www.dlp.com ConsumerElectronics www.ti.com/consumer-apps DSP dsp.ti.com EnergyandLighting www.ti.com/energy ClocksandTimers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security PowerMgmt power.ti.com Space,AvionicsandDefense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com VideoandImaging www.ti.com/video RFID www.ti-rfid.com OMAPApplicationsProcessors www.ti.com/omap TIE2ECommunity e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:TexasInstruments,PostOfficeBox655303,Dallas,Texas75265 Copyright©2014,TexasInstrumentsIncorporated