CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCJ Chip Type, Low ESR, Higher Capacitance PCK Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at PCJ 　260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. Low ESR Higher Capacitance, PCF Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 33 to 2700µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is ESR ( 1) 150% or less than the initial specified value applied for 2000 hours at 105°C. Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the Damp Heat tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right. tan δ 130% or less than the initial specified value Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall Leakage current ( 2) Less than or equal to the initial specified value Resistance to not exceed 60 seconds. Soldering Heat In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Dimensions Type numbering system (Example : 6.3V 220µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Positive P C J 0 J 2 2 1 MC L 1 G S Plastic platform X. Capacitance Lot No. 0.3MAX. C±0.2 MA Taping code 5 0. Size code Configuration CJ220j841 D±0.5φ B±0.2 E A±0.2 Capacitance tolerance (±20%) Rated capacitance (220µF) Series Voltage (j:6.3v) L+-00..41 H Negative Rated voltage (6.3V) Series name Type (mm) Size φ5 × 6L φ6.3 × 6L φ6.3 × 8L φ8 × 7L φ8 × 8L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10Lφ10 × 12.7L Voltage φD 5.0 6.3 6.3 8.0 8.0 8.0 8.0 10.0 10.0 10.0 V 2.5 4 6.3 10 16 L 5.9 5.9 7.9 6.9 7.9 9.9 11.9 7.9 9.9 12.6 Code e g j A C A 6.0 7.3 7.3 9.0 9.0 9.0 9.0 11.0 11.0 11.0 B 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 C 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 Frequency coefficient of rated ripple current E 1.6 2.1 2.1 3.2 3.2 3.2 3.2 4.6 4.6 4.6 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Coefficient 0.05 0.30 0.70 1.00 Dimension table in next page. 41

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCJ Dimensions Rated Voltage ESR Rated Ripple Surge Voltage Rated Capacitance Case Size Leakage Current (V) tan δ (mΩ) (mArms) Part Number (code) (V) (µF) φD × L (mm) (µA) (at 100kHz 20°C) (105°C/100kHz) 180 5 × 6 0.12 90 21 2670 PCJ0E181MCL1GS 390 6.3 × 6 0.12 195 15 3400 PCJ0E391MCL1GS 470 6.3 × 8 0.12 235 13 3600 PCJ0E471MCL1GS 560 6.3 × 8 0.12 280 13 3600 PCJ0E561MCL4GS 560 8 × 7 0.12 280 13 4100 PCJ0E561MCL1GS 680 8 × 7 0.12 340 13 4100 PCJ0E681MCL1GS 2.5 820 8 × 8 0.12 410 12 4260 PCJ0E821MCL6GS 2.8 (0E) 820 8 × 12 0.12 410 9 5400 PCJ0E821MCL1GS 1000 8 × 8 0.12 500 12 4260 PCJ0E102MCL1GS 1200 10 × 8 0.12 600 13 4800 PCJ0E122MCL1GS 1500 8 × 10 0.12 750 10 5220 PCJ0E152MCL6GS 1500 8 × 12 0.12 750 9 5400 PCJ0E152MCL1GS 2200 10 × 10 0.12 1100 10 5500 PCJ0E222MCL1GS 2700 10 × 12.7 0.12 1350 9 5800 PCJ0E272MCL1GS 100 5 × 6 0.12 80 22 2610 PCJ0G101MCL1GS 150 5 × 6 0.12 120 22 2610 PCJ0G151MCL1GS 270 6.3 × 6 0.12 216 15 3200 PCJ0G271MCL1GS 330 6.3 × 6 0.12 264 15 3300 PCJ0G331MCL1GS 390 6.3 × 8 0.12 312 14 3470 PCJ0G391MCL1GS 470 8 × 7 0.12 376 14 3950 PCJ0G471MCL1GS 560 8 × 7 0.12 448 14 4000 PCJ0G561MCL1GS 560 8 × 12 0.12 448 9 5200 PCJ0G561MCL9GS 680 8 × 8 0.12 544 13 3950 PCJ0G681MCL1GS 4 4.6 1000 8 × 10 0.12 800 10 5220 PCJ0G102MCL4GS (0G) 1000 10 × 8 0.12 800 13 4300 PCJ0G102MCL1GS 1200 8 × 12 0.12 960 9 5400 PCJ0G122MCL1GS 1200 10 × 10 0.12 960 10 5500 PCJ0G122MCL6GS 1500 8 × 12 0.12 1200 9 5200 PCJ0G152MCL4GS 1500 10 × 10 0.12 1200 10 5500 PCJ0G152MCL1GS 1800 10 × 10 0.12 1440 10 5500 PCJ0G182MCL1GS 1800 10 × 12.7 0.12 1440 9 5600 PCJ0G182MCL9GS 2200 10 × 12.7 0.12 1760 9 5700 PCJ0G222MCL1GS 100 5 × 6 0.12 126 24 2500 PCJ0J101MCL1GS 120 5 × 6 0.12 151 24 2500 PCJ0J121MCL1GS 220 6.3 × 6 0.12 277 15 3200 PCJ0J221MCL1GS 270 6.3 × 8 0.12 340 14 3470 PCJ0J271MCL1GS 330 6.3 × 8 0.12 416 14 3470 PCJ0J331MCL4GS 330 8 × 7 0.12 416 14 3950 PCJ0J331MCL1GS 390 8 × 7 0.12 491 14 3950 PCJ0J391MCL1GS 6.3 7.2 470 8 × 8 0.12 592 13 3950 PCJ0J471MCL1GS (0J) 820 8 × 10 0.12 1033 12 4770 PCJ0J821MCL6GS 820 8 × 12 0.12 1033 10 5150 PCJ0J821MCL4GS 820 10 × 8 0.12 1033 13 4500 PCJ0J821MCL1GS 1200 10 × 10 0.12 1512 12 5025 PCJ0J122MCL1GS 1500 10 × 10 0.12 1890 12 5025 PCJ0J152MCL1GS 1500 10 × 12.7 0.12 1890 10 5500 PCJ0J152MCL9GS 1800 10 × 12.7 0.12 2268 11 5200 PCJ0J182MCL1GS 47 5 × 6 0.12 94 28 2310 PCJ1A470MCL1GS 56 5 × 6 0.12 112 28 2310 PCJ1A560MCL1GS 68 5 × 6 0.12 136 28 2310 PCJ1A680MCL1GS 120 6.3 × 6 0.12 240 25 2530 PCJ1A121MCL1GS 150 6.3 × 8 0.12 300 21 2880 PCJ1A151MCL1GS 10 11.5 220 8 × 7 0.12 440 21 3220 PCJ1A221MCL1GS (1A) 270 8 × 7 0.12 540 21 3220 PCJ1A271MCL1GS 330 8 × 8 0.12 660 19 3390 PCJ1A331MCL1GS 390 8 × 10 0.12 780 17 4000 PCJ1A391MCL1GS 470 10 × 8 0.12 940 19 3800 PCJ1A471MCL1GS 680 10 × 10 0.12 1360 13 4820 PCJ1A681MCL1GS 33 5 × 6 0.12 105 35 2070 PCJ1C330MCL1GS 39 5 × 6 0.12 125 35 2070 PCJ1C390MCL1GS 68 6.3 × 6 0.12 217 28 2390 PCJ1C680MCL1GS 82 6.3 × 8 0.12 262 24 2700 PCJ1C820MCL1GS 100 6.3 × 8 0.12 320 24 2700 PCJ1C101MCL4GS 100 8 × 7 0.12 320 24 3010 PCJ1C101MCL1GS 16 18.4 120 8 × 7 0.12 384 24 3010 PCJ1C121MCL1GS (1C) 150 8 × 8 0.12 480 22 3150 PCJ1C151MCL1GS 180 8 × 10 0.12 576 18 3890 PCJ1C181MCL1GS 220 8 × 10 0.12 704 18 3890 PCJ1C221MCL4GS 220 10 × 8 0.12 704 22 3450 PCJ1C221MCL1GS 270 8 × 12 0.12 864 16 4070 PCJ1C271MCL1GS 330 10 × 10 0.12 1056 16 4350 PCJ1C331MCL1GS Rated ripple current (mArms) at 105°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. : In this case, 4 will be put at 12th digit of type numbering system. Recommended land size, soldering by reflow are given in page 18, 19. : In this case, 6 will be put at 12th digit of type numbering system. Please refer to page 3 for the minimum order quantity. : In this case, 9 will be put at 12th digit of type numbering system. 42

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: PCJ0G152MCL1GS PCJ0E272MCL1GS PCJ0E391MCL1GS PCJ0E561MCL1GS PCJ0E681MCL1GS PCJ0E821MCL1GS PCJ0G102MCL1GS PCJ0E181MCL1GS PCJ0G151MCL1GS PCJ0E152MCL1GS PCJ0G152MCL4GS PCJ0G182MCL1GS PCJ0G222MCL1GS PCJ0G331MCL1GS PCJ0G561MCL1GS PCJ0G561MCL9GS PCJ0J101MCL1GS PCJ0G122MCL1GS PCJ0E222MCL1GS PCJ0E122MCL1GS PCJ0J182MCL1GS PCJ1A681MCL1GS PCJ0J221MCL1GS PCJ0J391MCL1GS PCJ0J821MCL1GS PCJ0J821MCL4GS PCJ1A121MCL1GS PCJ1A271MCL1GS PCJ1A680MCL1GS PCJ1C121MCL1GS PCJ1C221MCL1GS PCJ1C331MCL1GS PCJ1C390MCL1GS PCJ1C680MCL1GS PCJ1A471MCL1GS PCJ0J152MCL1GS PCJ0E102MCL1GS PCJ0E152MCL6GS PCJ0E471MCL1GS PCJ0E561MCL4GS PCJ0E821MCL6GS PCJ0G101MCL1GS PCJ0G102MCL4GS PCJ0G122MCL6GS PCJ0G182MCL9GS PCJ0G271MCL1GS PCJ0G391MCL1GS PCJ0G471MCL1GS PCJ0G681MCL1GS PCJ0J122MCL1GS PCJ0J152MCL9GS PCJ0J271MCL1GS PCJ0J331MCL1GS PCJ0J331MCL4GS PCJ0J471MCL1GS PCJ0J821MCL6GS PCJ1A151MCL1GS PCJ1A221MCL1GS PCJ1A331MCL1GS PCJ1A391MCL1GS PCJ1A470MCL1GS PCJ1A560MCL1GS PCJ1C101MCL1GS PCJ1C101MCL4GS PCJ1C151MCL1GS PCJ1C181MCL1GS PCJ1C221MCL4GS PCJ1C330MCL1GS PCJ1C820MCL1GS PCJ0J121MCL1GS PCJ1C271MCL1GS