Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

PBSS304NX 60 V, 4.7 A NPN low V (BISS) transistor CEsat Rev. 02 — 20 November 2009 Product data sheet 1. Product profile 1.1 General description NPN low V Breakthrough In Small Signal (BISS) transistor in a SOT89 CEsat (SC-62/TO-243) small and flat lead Surface-Mounted Device (SMD) plastic package. PNP complement: PBSS304PX. 1.2 Features (cid:132) Low collector-emitter saturation voltage V CEsat (cid:132) High collector current capability I and I C CM (cid:132) High collector current gain (h ) at high I FE C (cid:132) High efficiency due to less heat generation (cid:132) Smaller required Printed-Circuit Board (PCB) area than for conventional transistors 1.3 Applications (cid:132) High-voltage DC-to-DC conversion (cid:132) High-voltage MOSFET gate driving (cid:132) High-voltage motor control (cid:132) High-voltage power switches (e.g. motors, fans) (cid:132) Automotive applications 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V collector-emitter voltage open base - - 60 V CEO I collector current - - 4.7 A C I peak collector current single pulse; - - 9.4 A CM t ≤1ms p R collector-emitter saturation I =4A; [1] - 37 53 mΩ CEsat C resistance I =200mA B [1] Pulse test: tp≤300μs; δ≤0.02.

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 2. Pinning information Table 2. Pinning Pin Description Simplified outline Symbol 1 emitter 2 2 collector 3 base 3 1 3 2 1 sym042 3. Ordering information Table 3. Ordering information Type number Package Name Description Version PBSS304NX SC-62 plastic surface-mounted package; collector pad for good SOT89 heat transfer; 3leads 4. Marking Table 4. Marking codes Type number Marking code[1] PBSS304NX *5E [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 2 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V collector-base voltage open emitter - 60 V CBO V collector-emitter voltage open base - 60 V CEO V emitter-base voltage open collector - 5 V EBO I collector current - 4.7 A C I peak collector current single pulse; - 9.4 A CM t ≤1ms p P total power dissipation T ≤25°C [1] - 0.6 W tot amb [2] - 1.65 W [3] - 2.1 W T junction temperature - 150 °C j T ambient temperature −65 +150 °C amb T storage temperature −65 +150 °C stg [1] Device mounted on an FR4PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4PCB, single-sided copper, tin-plated, mounting pad for collector 6cm2. [3] Device mounted on a ceramicPCB, Al O , standard footprint. 2 3 006aaa556 2.5 Ptot (W) (1) 2.0 (2) 1.5 1.0 (3) 0.5 0 −75 −25 25 75 125 175 Tamb (°C) (1) CeramicPCB, Al O , standard footprint 2 3 (2) FR4PCB, mounting pad for collector 6cm2 (3) FR4PCB, standard footprint Fig 1. Power derating curves PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 3 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 6. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R thermal resistance from in free air [1] - - 208 K/W th(j-a) junction to ambient [2] - - 76 K/W [3] - - 60 K/W R thermal resistance from - - 20 K/W th(j-sp) junction to solder point [1] Device mounted on an FR4PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4PCB, single-sided copper, tin-plated, mounting pad for collector 6cm2. [3] Device mounted on a ceramicPCB, Al O , standard footprint. 2 3 103 006aaa557 Zth(j-a) (K/W) δ = 1 0.75 102 0.50 0.33 0.20 0.10 0.05 10 0.02 0.01 0 1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 tp (s) FR4PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 4 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 102 006aaa558 δ = 1 0.75 Zth(j-a) 0.50 (K/W) 0.33 0.20 10 0.10 0.05 0.02 0.01 1 0 10−1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 tp (s) FR4PCB, mounting pad for collector 6cm2 Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values 102 006aaa559 δ = 1 Zth(j-a) 0.75 (K/W) 0.50 0.33 0.20 10 0.10 0.05 0.02 1 0.01 0 10−1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 tp (s) CeramicPCB, Al O , standard footprint 2 3 Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 5 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 7. Characteristics Table 7. Characteristics T =25°C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit I collector-base cut-off V =60V; I =0A - - 100 nA CBO CB E current V =60V; I =0A; - - 50 μA CB E T =150°C j I emitter-base cut-off V =5V; I =0A - - 100 nA EBO EB C current h DCcurrent gain V =2V; I =0.5A [1] 300 520 - FE CE C V =2V; I =1A [1] 300 500 - CE C V =2V; I =2A [1] 250 470 - CE C V =2V; I =4A [1] 150 250 - CE C V =2V; I =6A [1] 75 115 - CE C V collector-emitter I =0.5A; I =50mA [1] - 25 35 mV CEsat C B saturation voltage I =1A; I =50mA [1] - 50 70 mV C B I =1A; I =10mA [1] - 85 120 mV C B I =2A; I =40mA [1] - 105 150 mV C B I =4A; I =200mA [1] - 145 210 mV C B I =4A; I =400mA [1] - 140 200 mV C B I =4A; I =80mA [1] - 190 290 mV C B I =4.7A; I =235mA [1] - 170 245 mV C B R collector-emitter I =4A; I =200mA [1] - 37 53 mΩ CEsat C B saturation resistance I =4A; I =80mA [1] - 48 73 mΩ C B V base-emitter saturation I =1A; I =100mA [1] - 0.82 0.9 V BEsat C B voltage I =4A; I =400mA [1] - 0.94 1.05 V C B V base-emitter turn-on V =2V; I =2A [1] - 0.75 0.85 V BEon CE C voltage t delay time V =12.5V; I =3A; - 15 - ns d CC C I =0.15A; t rise time Bon - 95 - ns r I =−0.15A Boff t turn-on time - 110 - ns on t storage time - 360 - ns s t fall time - 195 - ns f t turn-off time - 555 - ns off f transition frequency V =10V; I =100mA; - 130 - MHz T CE C f=100MHz C collector capacitance V =10V; I =i =0A; - 48 70 pF c CB E e f=1MHz [1] Pulse test: tp≤300μs; δ≤0.02. PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 6 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 006aaa605 006aaa611 1000 14 IC hFE (A) 12 IB (mA) = 250 800 225 200 (1) 10 175 150 125 100 600 (2) 8 75 50 25 6 400 (3) 4 200 2 0 0 10−1 1 10 102 103 104 0 1 2 3 4 5 IC (mA) VCE (V) VCE=2V Tamb=25°C (1) Tamb=100°C (2) Tamb=25°C (3) Tamb=−55°C Fig 5. DCcurrent gain as a function of collector Fig 6. Collector current as a function of current; typical values collector-emitter voltage; typical values 006aaa606 006aaa609 1.2 1.2 VBE VBEsat (V) (V) 0.8 0.8 (1) (1) (2) (2) 0.4 0.4 (3) (3) 0 0 10−1 1 10 102 103 104 10−1 1 10 102 103 104 IC (mA) IC (mA) V =2V I /I =20 CE C B (1) Tamb=−55°C (1) Tamb=−55°C (2) Tamb=25°C (2) Tamb=25°C (3) Tamb=100°C (3) Tamb=100°C Fig 7. Base-emitter voltage as a function of collector Fig 8. Base-emitter saturation voltage as a function current; typical values of collector current; typical values PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 7 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 006aaa607 006aaa608 1 1 VCEsat VCEsat (V) (V) 10−1 10−1 (1) (2) (1) (3) (2) 10−2 10−2 (3) 10−3 10−3 10−1 1 10 102 103 104 10−1 1 10 102 103 104 IC (mA) IC (mA) IC/IB=20 Tamb=25°C (1) Tamb=100°C (1) IC/IB=100 (2) Tamb=25°C (2) IC/IB=50 (3) Tamb=−55°C (3) IC/IB=10 Fig 9. Collector-emitter saturation voltage as a Fig 10. Collector-emitter saturation voltage as a function of collector current; typical values function of collector current; typical values 102 006aaa610 103 006aaa612 RC(ΩE)sat RC(ΩE)sat 102 10 10 1 1 (1) (1) 10−1 (2) (2) (3) 10−1 (3) 10−2 10−2 10−1 1 10 102 103 104 10−1 1 10 102 103 104 IC (mA) IC (mA) IC/IB=20 Tamb=25°C (1) Tamb=100°C (1) IC/IB=100 (2) Tamb=25°C (2) IC/IB=50 (3) Tamb=−55°C (3) IC/IB=10 Fig 11. Collector-emitter saturation resistance as a Fig 12. Collector-emitter saturation resistance as a function of collector current; typical values function of collector current; typical values PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 8 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 8. Test information IB 90 % input pulse (idealized waveform) IBon (100 %) 10 % IBoff output pulse IC (idealized waveform) 90 % IC (100 %) 10 % t td tr ts tf ton toff 006aaa003 Fig 13. BISS transistor switching time definition VBB VCC RB RC (probe) Vo (probe) oscilloscope oscilloscope 450 Ω 450 Ω R2 VI DUT R1 mlb826 VCC=12.5V; IC=3A; IBon=0.15A; IBoff=−0.15A Fig 14. Test circuit for switching times PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 9 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 9. Package outline 4.6 4.4 1.6 1.8 1.4 1.4 2.6 2.4 4.25 3.75 1.2 1 2 3 0.8 0.53 0.40 0.48 0.44 1.5 0.35 0.23 3 Dimensions in mm 06-08-29 Fig 15. Package outline SOT89 (SC-62/TO-243) 10. Packing information Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 1000 4000 PBSS304NX SOT89 8mm pitch, 12mm tape and reel -115 -135 [1] For further information and the availability of packing methods, see Section15. PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 10 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 11. Soldering 4.75 2.25 2.00 1.90 1.20 solder lands 0.85 0.20 solder resist occupied area 1.70 1.20 solder paste 4.60 4.85 Dimensions in mm 0.50 1.20 1.20 1.00 3 2 1 (3x) msa442 0.60 (3x) 0.70 (3x) 3.70 3.95 SOT89 standard mounting conditions for reflow soldering Fig 16. Reflow soldering footprint 6.60 2.40 2 3.50 7.60 solder lands 0.50 3 1 1.20 solder resist occupied area 3.00 Dimensions in mm preferred transport direction during soldering 1.50 0.70 5.30 msa423 Not recommended for wave soldering Fig 17. Wave soldering footprint PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 11 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 12. Mounting 32 mm 30 mm 32 mm 20 2.5 mm mm 40 40 mm 1 mm mm 3 mm 2.5 mm 2.5 mm 1 mm 1 mm 0.5 mm 0.5 mm 5 mm 5 mm 3.96 mm 3.96 mm 1.6 mm 1.6 mm 001aaa234 001aaa235 PCBthickness: PCBthickness =1.6mm FR4PCB =1.6mm ceramicPCB =0.635mm Fig 18. FR4PCB, standard footprint; Fig 19. FR4PCB, mounting pad for ceramicPCB, Al O , standard collector 6cm2 2 3 footprint PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 12 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 13. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes PBSS304NX_2 20091120 Product data sheet - PBSS304NX_1 Modifications: • This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content. • Figure 15 “Package outline SOT89 (SC-62/TO-243)”: updated • Figure 16 “Reflow soldering footprint”: updated • Figure 17 “Wave soldering footprint”: updated PBSS304NX_1 20060816 Product data sheet - - PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 13 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 14. Legal information 14.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URLhttp://www.nxp.com. 14.2 Definitions damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in Applications — Applications that are described herein for any of these modifications or additions. NXP Semiconductors does not give any products are for illustrative purposes only. NXP Semiconductors makes no representations or warranties as to the accuracy or completeness of representation or warranty that such applications will be suitable for the information included herein and shall have no liability for the consequences of specified use without further testing or modification. use of such information. Limiting values — Stress above one or more limiting values (as defined in Short data sheet — A short data sheet is an extract from a full data sheet the Absolute Maximum Ratings System of IEC60134) may cause permanent with the same product type number(s) and title. A short data sheet is intended damage to the device. Limiting values are stress ratings only and operation of for quick reference only and should not be relied upon to contain detailed and the device at these or any other conditions above those given in the full information. For detailed and full information see the relevant full data Characteristics sections of this document is not implied. Exposure to limiting sheet, which is available on request via the local NXP Semiconductors sales values for extended periods may affect device reliability. office. In case of any inconsistency or conflict with the short data sheet, the Terms and conditions of sale — NXP Semiconductors products are sold full data sheet shall prevail. subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, 14.3 Disclaimers intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such General — Information in this document is believed to be accurate and terms and conditions, the latter will prevail. reliable. However, NXP Semiconductors does not give any representations or No offer to sell or license — Nothing in this document may be interpreted or warranties, expressed or implied, as to the accuracy or completeness of such construed as an offer to sell products that is open for acceptance or the grant, information and shall have no liability for the consequences of use of such conveyance or implication of any license under any copyrights, patents or information. other industrial or intellectual property rights. Right to make changes — NXP Semiconductors reserves the right to make Export control — This document as well as the item(s) described herein changes to information published in this document, including without may be subject to export control regulations. Export might require a prior limitation specifications and product descriptions, at any time and without authorization from national authorities. notice. This document supersedes and replaces all information supplied prior to the publication hereof. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this Suitability for use — NXP Semiconductors products are not designed, document, and as such is not complete, exhaustive or legally binding. authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected 14.4 Trademarks to result in personal injury, death or severe property or environmental Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 15. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PBSS304NX_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 20 November 2009 14 of 15

PBSS304NX NXP Semiconductors 60 V, 4.7 A NPN low V (BISS) transistor CEsat 16. Contents 1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 General description . . . . . . . . . . . . . . . . . . . . . 1 1.2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2 4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 Thermal characteristics . . . . . . . . . . . . . . . . . . 4 7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 6 8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 9 9 Package outline. . . . . . . . . . . . . . . . . . . . . . . . 10 10 Packing information . . . . . . . . . . . . . . . . . . . . 10 11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 12 Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 13 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 13 14 Legal information. . . . . . . . . . . . . . . . . . . . . . . 14 14.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14 14.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 14.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 14 14.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14 15 Contact information. . . . . . . . . . . . . . . . . . . . . 14 16 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 20 November 2009 Document identifier: PBSS304NX_2