General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PB n 1pole 10A, 1 form C (CO) or 1 form A (NO) n Environmentally-friendly cadmium-free contacts n Class F coil system standard n Compact and simple design gives high process security n Product in accordance to IEC 60335-1 Typical applications White goods, small home appliances, heating temperature controllers. Z Approvals Coil Data PB1 PB5 PB6 VDE Cert. No. 40008364, UL E214025 Coil voltage range 5 to 48 VDC 5 to 24 VDC 5 to 24 VDC Technical data of approved types on request. Operative range, IEC 61810 2 2 2 Contact Data Coil versions, DC coil Contact arrangement 1 form C (CO) or 1 form A (NO) Coil Rated Operate Release Coil Rated coil Rated voltage 250VAC code voltage voltage voltage resistance power Max. switching voltage 400VAC VDC VDC VDC Ω±10% mW Rated current 10A Coil versions, DC-coil, 360mW Limiting making current, max 4 s, duty factor 10% 15A 005 5 3.75 0.5 70 357 Breaking capacity max. 2500VA 006 6 4.50 0.6 100 360 Contact material AgNi 90/10, AgSnO2 009 9 6.75 0.9 225 360 Frequency of operation, with/without load 360/36000h-1 012 12 9.00 1.2 400 360 Operate/release time max. 10/20ms 018 18 13.50 1.8 900 360 Bounce time max., form A/form B 10/15ms 022 22 16.50 2.2 1344 360 Contact ratings 024 24 18.00 2.4 1600 360 Type Contact Load Cycles 048 48 36.00 4.8 6400 360 IEC 61810 Coil versions, DC-coil, 500mW PB114; PB113 A/B (NO/NC) 10A/3A, 250VAC, cosφ=1, 85°C 30x103 005 5 3.75 0.5 48 521 PB114 A of C 10A, 250VAC, cosφ=1, 85°C 30x103 006 6 4.5 0.6 69 522 PB134; PB133 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103 012 12 9 1.2 274 526 PB134 A (NO) 6.5A, 440VAC, cosφ=1, 85°C 50x103 024 24 18 2.4 1097 525 PB634 A (NO) 8.5A, 250VAC, cosφ=1, 85°C 100x103 All figures are given for coil without pre-energization, at ambient temperature +23°C. PB634 A (NO) 10A, 250VAC, cosφ=1, 85°C 60x103 Other coil voltages on request. UL 508 PB1x4 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103 Mechanical endurance, DC coil 5x106 operations Insulation Data Initial dielectric strength between open contacts 1000Vrms between contact and coil 2500Vrms Clearance/creepage between contact and coil form C (CO) version ≥3/4mm form A (NO) version ≥4/5mm Material group of insulation parts IIIa Tracking index of relay base PTI250 1 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PB (Continued) Other Data PCB layout1) / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire version PB1, PB5 according EN60335, par.30 Ambient temperature, DC coil -40 to +85°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A/form B, 30 to 400Hz PB1, PB6 >10/4g PB5 >10/6 g Shock resistance (destructive) >100g Terminal type PCB-THT Weight 5.4g Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit tube/35 pcs., box/1050 pcs. Dimensions 1) Layout note: No openings (e.g. holes, slots, cut outs, unused pins, open through connections, etc.) allowed under the relay base. The relay base must be fully covered by the PCB, recommended minimum distance between the relay and the edge of the printed circuit board is 5 mm. For more information, please contact our application support. Product code structure Typical product code PB 1 1 4 012 Type PB Miniature Power PCB Relay PB Version 1 Standard version 5 500 mW version 6 High performance version (form A version only) Contact arrangement 1 1 form C contact (1 CO) 3 1 form A contact (1 NO) Contact material 3 AgSnO 4 AgNi 90/10 2 Coil Coil code: please refer to coil versions table Product code Version Contacts Contact material Coil Part number PB114005 Standard 1 form C AgNi 90/10 5VDC 6-1415029-1 PB114006 class F 1 CO contact 6VDC 7-1415029-1 PB114012 12VDC 8-1415029-1 PB114024 24VDC 9-1415029-1 PB134005 1 form A 5VDC 1415030-1 PB134006 1 NO contact 6VDC 1-1415030-1 PB134012 12VDC 2-1415030-1 PB134024 24VDC 3-1415030-1 PB514012 500 mW 1 form C 12VDC 2-1415538-5 PB514024 version 1 CO contact 24VDC 5-1415535-6 PB634005 High 1 form A 5VDC 3-1415541-8 PB634006 performance 1 NO contact 6VDC 3-1415541-9 PB634012 version 12VDC 4-1415541-1 PB634024 24VDC 4-1415541-2 2 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: PB114012