PAT www.vishay.com Vishay Dale Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES • Resistance range: 2.5  to 3 M • AEC-Q200 qualified • AEC-Q200 ESD rated class 1C (2 kV) • Laser trimmed to any value • Moisture resistant to MIL-STD-202, method 202 • Tantalum nitride resistor film on high purity These chip resistors are available in wraparound alumina substrate terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give • 100 % visual inspected per MIL-PRF-55342 superior performance on moisture resistance, electrostati c • Laser-trimmed tolerances to ± 0.1 % discharge, voltage coefficient, power handling an d • Load life stability < 0.05 % at 1000 h at 70 °C resistance stability. The terminations consist of an adhesion • Very low noise and voltage coefficient layer, a leach resistant nickel barrier, and solder coatin g (< -30 dB, < 0.1 ppm/V) (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. • Sulfur resistant (per ASTM B809-95 humid vapor test) • Material categorization: for definitions of complianc e CONSTRUCTION please see www.vishay.com/doc?99912 Ta ntalum Nitride Passivation Resistive Film TYPICAL PERFORMANCE Solder Coating ABSOLUTE Nickel Barrier TCR 25 High Purity Alumina Substrate TOL. 0.1 Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 2.5  to 3 M - TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C Stability: Absolute ± 0.05 % 2000 h at 70 °C rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Noise < -30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 75 20 to 51K 0603 150 75 2.5 to 130K 0805 200 100 10 to 301K 1206 400 200 10 to 1M 1505 400 150 10 to 1M 2208 750 150 10 to 1.75M 2010 800 200 10 to 2M 2512 1000 200 10 to 3M Revision: 27-Nov-2019 1 Document Number: 60024 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D T D W T E L L CASE SIZE L W T D E 0402 0.041 ± 0.003 0.022 ± 0.003 0.015 ± 0.003 0.010 ± 0.005 0.010 ± 0.005 0603 0.064 ± 0.006 0.032 ± 0.005 0.015 ± 0.003 0.012 ± 0.005 0.015 ± 0.005 0805 0.080 ± 0.006 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005 1206 0.126 ± 0.008 0.063 ± 0.005 0.015 ± 0.003 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 1505 0.155 ± 0.007 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005 2010 0.209 ± 0.009 0.098 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005 2208 0.230 ± 0.007 0.075 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005 2512 0.259 ± 0.009 0.124 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) LIMITS TYPICAL VISHAY ENVIRONMENTAL TEST CONDITIONS PER AEC-Q200 PERFORMANCE Resistance Temperature Characteristic -55 °C to +125 °C ± 50 ppm/°C ± 35 ppm/°C Max. Ambient Temp. at Rated Wattage +70 °C +70 °C Max. Ambient Temp. at Power Derating +150 °C +150 °C High Temperature Storage R MIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 % Temperature Cycling R JESD22, JA-104, 1000 cycles, -55 °C to +125 °C ± 0.15 % + 0.013 % Moisture Resistance R MIL-STD-202, 106 ± 0.20 % + 0.0010 % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.004 % Life R MIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 % Mechanical Shock R MIL-STD-202, method 213, condition C ± 0.1 % + 0.004 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 % Resistance to Soldering Heat R MIL-STD-202 method 210, condition D ± 0.10 % + 0.0150 % Electrostatic Discharge R AEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q200-006 at 1 kg for 60 s ± 0.10 % + 0.009 % Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable DERATING CURVE 100 wer 80 o P ed 60 at R of 40 nt e c er 20 P 0 0 70 125 155 Ambient Temperature °C Revision: 27-Nov-2019 2 Document Number: 60024 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAT www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T 1 2 0 6 E 1 0 0 2 B S T 1 GLOBAL CASE TCR RESISTANCE TOLERANCE TERMINATION PACKAGING MODEL SIZE CHARACTERISTIC PAT 0402 E = ± 25 ppm/°C The first 3 digits are B = ± 0.1 % S = wraparound  BULK 0603 H = ± 50 ppm/°C significant figures D = ± 0.5 % lead (Pb)-free  BS = 100 min., 1 mult. 0805 K = ± 100 ppm/°C and the last digit F = ± 1.0 % solder 1206 L = ± 200 ppm/°C specifies the number G = ± 2.0 % w/nickel barrier WAFFLE 1505 of zeros to follow. J = ± 5.0 % WS = 100 min., 1 mult. 2010 “R” designates the W0 = 100 min., 100 mult. 2208 decimal point. WI = 100 min., 1 mult. 2512 (item single lot date code) Example: WP = 100 min., 1 mult. 10R0 = 10  (package unit single lot 1000 = 100  date code) 1002 = 10 k TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) Note (1) Preferred packaging code TCR TOLERANCE RESISTANCE (ppm/°C) (%) 10  to 1 M 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5  to 10  100, 200 1, 2, 5 1.0  to 5  200 1, 2, 5 Revision: 27-Nov-2019 3 Document Number: 60024 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000