Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series P6SMB Series RoHS Pb e3 Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients Uni-directional induced by lightning and other transient voltage events. Features Bi-directional • 600W peak pulse power • Built-in strain relief capability at 10/1000μs • Fast response time: waveform, repetition rate typically less than 1.0ps (duty cycles):0.01% from 0V to V min BR Agency Approvals • Excellent clamping • High temperature capability to reflow soldering AGENCY AGENCY FILE NUMBER • Low incremental surge guaranteed: 260°C/40sec E230531 resistance • V @ T= V @25°C BR J BR • Typical I less than 1μA x (1+αT x (T - 25)) R J when V min>12V (αT:Temperature Maximum Ratings and Thermal Characteristics BR (T =25OC unless otherwise noted) • Optimized surface mount Coefficient, typical value A footprint for minimal PCB is 0.1%) Parameter Symbol Value Unit space impact • UL Recognized compound Peak Pulse Power Dissipation at • Low profile package meeting flammability TA=25ºC by 10/1000µs Waveform PPPM 600 W • Typical failure mode due classification V-0 (Fig.2)(Note 1), (Note 2), (Note 5) to exceeding maximum • Meet MSL level1, per Power Dissipation on Infinite Heat P 5.0 W ratings is a short circuit J-STD-020, LF maximun Sink at TL=50OC D condition peak of 260°C Peak Forward Surge Current, 8.3ms I 100 A • Whisker test conducted • Matte tin lead–free plated Single Half Sine Wave (Note 3) FSM based on Table 4a and 4c • Halogen free and RoHS Maximum Instantaneous Forward of JEDEC JESD201A compliant Voltage at 50A for Unidirectional V 3.5/5.0 V Only (Note 4) F • IEC 61000-4-2 ESD • Pb-free E3 means 2ND level Operating Temperature Range T -65 to 150 °C 30kV(Air), 30kV (Contact) interconnect is Pb-free J • EFT protection of data and the terminal finish Storage Temperature Range T -65 to 175 °C STG lines in accordance with material is tin(Sn) (IPC/ Typical Thermal Resistance Junction IEC 61000-4-4 JEDEC J-STD-609A.01) R 20 °C/W to Lead θJL Typical Thermal Resistance Junction R 100 °C/W to Ambient θJA Applications Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25OC per Fig. 3. TVS devices are ideal for the protection of I/O Interfaces, J 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. V bus and other vulnerable circuits used in Telecom, CC 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional Computer, Industrial and Consumer electronic device only, duty cycle=4 per minute maximum. applications. 4. V < 3.5V for single die parts and V< 5.0V for stacked-die parts. F F 5. The P of stacked-die parts is 800W and please contact littelfuse® for the detail PPM stacked-die parts. Functional Diagram Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series Electrical Characteristics (T=25°C unless otherwise noted) A Breakdown Test Maximum Maximum Maximum Reverse Agency NuPmarbt e r NuPmarbt e r Marking Stand off Voltage VBR Current VColaltmagpein Vg PPuelaske LReaekvaegrsee I Approval (Uni) (Bi) Vo(lVtaogltes )VR (Volts) @ IT IT @ Ipp C Current Ipp @ VR R UNI BI MIN MAX (mA) (V) (A) (µA) P6SMB6.8A P6SMB6.8CA 6V8A 6V8C 5.80 6.45 7.14 10 10.5 58.1 1000 X P6SMB7.5A P6SMB7.5CA 7V5A 7V5C 6.40 7.13 7.88 10 11.3 54.0 500 X P6SMB8.2A P6SMB8.2CA 8V2A 8V2C 7.02 7.79 8.61 10 12.1 50.4 200 X P6SMB9.1A P6SMB9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 45.5 50 X P6SMB10A P6SMB10CA 10A 10C 8.55 9.50 10.50 1 14.5 42.1 10 X P6SMB11A P6SMB11CA 11A 11C 9.40 10.50 11.60 1 15.6 39.1 5 X P6SMB12A P6SMB12CA 12A 12C 10.20 11.40 12.60 1 16.7 36.5 5 X P6SMB13A P6SMB13CA 13A 13C 11.10 12.40 13.70 1 18.2 33.5 1 X P6SMB15A P6SMB15CA 15A 15C 12.80 14.30 15.80 1 21.2 28.8 1 X P6SMB16A P6SMB16CA 16A 16C 13.60 15.20 16.80 1 22.5 27.1 1 X P6SMB18A P6SMB18CA 18A 18C 15.30 17.10 18.90 1 25.5 24.2 1 X P6SMB20A P6SMB20CA 20A 20C 17.10 19.00 21.00 1 27.7 22.0 1 X P6SMB22A P6SMB22CA 22A 22C 18.80 20.90 23.10 1 30.6 19.9 1 X P6SMB24A P6SMB24CA 24A 24C 20.50 22.80 25.20 1 33.2 18.4 1 X P6SMB27A P6SMB27CA 27A 27C 23.10 25.70 28.40 1 37.5 16.3 1 X P6SMB30A P6SMB30CA 30A 30C 25.60 28.50 31.50 1 41.4 14.7 1 X P6SMB33A P6SMB33CA 33A 33C 28.20 31.40 34.70 1 45.7 13.3 1 X P6SMB36A P6SMB36CA 36A 36C 30.80 34.20 37.80 1 49.9 12.2 1 X P6SMB39A P6SMB39CA 39A 39C 33.30 37.10 41.00 1 53.9 11.3 1 X P6SMB43A P6SMB43CA 43A 43C 36.80 40.90 45.20 1 59.3 10.3 1 X P6SMB47A P6SMB47CA 47A 47C 40.20 44.70 49.40 1 64.8 9.4 1 X P6SMB51A P6SMB51CA 51A 51C 43.60 48.50 53.60 1 70.1 8.7 1 X P6SMB56A P6SMB56CA 56A 56C 47.80 53.20 58.80 1 77.0 7.9 1 X P6SMB58A P6SMB58CA 58A 58C 52.78 55.10 60.90 1 79.8 7.7 1 - P6SMB62A P6SMB62CA 62A 62C 53.00 58.90 65.10 1 85.0 7.2 1 X P6SMB68A P6SMB68CA 68A 68C 58.10 64.60 71.40 1 92.0 6.6 1 X P6SMB75A P6SMB75CA 75A 75C 64.10 71.30 78.80 1 103.0 5.9 1 X P6SMB82A P6SMB82CA 82A 82C 70.10 77.90 86.10 1 113.0 5.4 1 X P6SMB91A P6SMB91CA 91A 91C 77.80 86.50 95.50 1 125.0 4.9 1 X P6SMB100A P6SMB100CA 100A 100C 85.50 95.00 105.00 1 137.0 4.5 1 X P6SMB110A P6SMB110CA 110A 110C 94.00 105.00 116.00 1 152.0 4.0 1 X P6SMB120A P6SMB120CA 120A 120C 102.00 114.00 126.00 1 165.0 3.7 1 X P6SMB130A P6SMB130CA 130A 130C 111.00 124.00 137.00 1 179.0 3.4 1 X P6SMB150A P6SMB150CA 150A 150C 128.00 143.00 158.00 1 207.0 2.9 1 X P6SMB160A P6SMB160CA 160A 160C 136.00 152.00 168.00 1 219.0 2.8 1 X P6SMB170A P6SMB170CA 170A 170C 145.00 162.00 179.00 1 234.0 2.6 1 X P6SMB180A P6SMB180CA 180A 180C 154.00 171.00 189.00 1 246.0 2.5 1 X P6SMB200A P6SMB200CA 200A 200C 171.00 190.00 210.00 1 274.0 2.2 1 X P6SMB220A P6SMB220CA 220A 220C 185.00 209.00 231.00 1 328.0 1.9 1 X P6SMB250A P6SMB250CA 250A 250C 214.00 237.00 263.00 1 344.0 1.8 1 X P6SMB300A P6SMB300CA 300A 300C 256.00 285.00 315.00 1 414.0 1.5 1 X P6SMB350A P6SMB350CA 350A 350C 300.00 332.00 368.00 1 482.0 1.3 1 - P6SMB400A P6SMB400CA 400A 400C 342.00 380.00 420.00 1 548.0 1.1 1 - P6SMB440A P6SMB440CA 440A 440C 376.00 418.00 462.00 1 602.0 1.0 1 - P6SMB480A P6SMB480CA 480A 480C 408.00 456.00 504.00 1 658.0 0.9 1 - P6SMB510A P6SMB510CA 510A 510C 434.00 485.00 535.00 1 698.0 0.9 1 - P6SMB530A P6SMB530CA 530A 530C 451.00 503.50 556.50 1 725.0 0.8 1 - P6SMB540A P6SMB540CA 540A 540C 460.00 513.00 567.00 1 740.0 0.8 1 - P6SMB550A P6SMB550CA 550A 550C 468.00 522.50 577.50 1 760.0 0.8 1 - P6SMB600A P6SMB600CA 600A 600C 512.00 570.00 630.00 1 828.0 0.75 1 - For bidirectional type having V of 10 volts and less, the I limit is double. R R For parts without A V is ± 10% and V is 5% higher than with A parts. BR C © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation (V * I ) PPM C PP V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients 100 W) TJ initial = TAMB k Voltage Across TVS er ( 10 stacked-die, 800W nt w at 10/1000µs, 25°C Voltage or Curre Current Through TVS eak Pulse Po 1 Sati n1g0l/e1 0d0ie0,µ6s0,0 2W5° C P -M P PP 0.1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d continues on next page. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 150 Pulse Power (P) or Current (I)PPPPDerating in Percentage % 24680000 - Peak Pulse Current, % IMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M ak IPP e P td 0 0 0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0 TJ - Initial Junction Temperature (ºC) t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 1000 10000.00 Uni-dire onal V=0V W) C/ 1000.00 Bi-direc nal V=0V e (° 100 nc a d Cj(pf) 100.00 UBni-id-dirierec onnaal l mal Impe 10 10.00 V=VR her T nt 1 e 1.00 ansi 1.00 10.00 100.00 1000.00 Tr VBR—Reverse Breakdown Voltage(V) 0.1 0.001 0.01 0.1 1 10 100 1000 T -Pulse Duration (s) P Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 120 100.0 A) Single die nt ( 100 e urr A) urge C 80 Current( 10.0 Stacked-die S d d 60 ar k Forwar 40 Peak Forw 1.0 - PeaM 20 -IF IFS 0 1 10 100 0.1 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Number of Cycles at 60 Hz VF-Peak Forward Voltage(V) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C s(min) Ramp-up Critical Zone Pre Heat -- TTeimmep e(mraitnu rteo Mmaaxx) ((Ttss()max)) 6200 0–° C180 secs (T)ure Ts(mTaLx) tL TL to TP Atov epreaagke ramp up rate (Liquidus Temp (TA) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A - Temperature (T ) (Liquidus) 217°C Reflow A 25˚C t 25˚C to Peak - Time (min to max) (t) 60 – 150 seconds Time (t) s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 6°C/second max Environmental Specifications Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 260°C High Temp. Storage JESD22-A103 Physical Specifications HTRB JESD22-A108 0.003 ounce, 0.093 grams Weight Temperature Cycling JESD22-A104 JEDEC DO214AA. Molded plastic body Case over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Color band denotes cathode except for Polarity bidirectional versions H3TRB JESD22-A101 Matte Tin-plated leads, Solderable per Terminal JESD22-B102 RSH JESD22-A111 Dimensions DO-214AA (SMB J-Bend) Cathode Band (for Uni-directional products only) Inches Millimeters Dimensions Min Max Min Max A C A 0.076 0.086 1.930 2.200 B 0.160 0.187 4.060 4.750 B C 0.130 0.155 3.300 3.940 D 0.078 0.103 1.990 2.610 H E 0.030 0.060 0.760 1.520 D F - 0.008 - 0.203 G 0.205 0.220 5.210 5.590 F E G H 0.006 0.012 0.152 0.305 J K L I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 I L 0.085 - 2.160 - Solder Pads (all dimensions in mm) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Transient Voltage Suppression Diodes Surface Mount – 600W > P6SMB series Part Numbering System Part Marking System P6SMB XXXCA Cathode Band (for uni-directional products only) F Littelfuse Logo 5% V VOLTAGE TOLERANCE BR BI-DIRECTIONAL XX V VOLTAGE Marking Code BR YMXXX SERIES Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Packaging Packaging Part number Quantity Package Option Specification P6SMBxxxXX DO-214AA 3000 Tape & Reel - 12mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.47 Cathode (12.0) 0.315 0.059 DIA Cover tape (8.0) (1.5) 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.5) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/15/18

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L ittelfuse: P6SMB540 P6SMB300 P6SMB170A P6SMB400C P6SMB68A P6SMB13A P6SMB350C P6SMB24CA P6SMB10C P6SMB56C P6SMB220 P6SMB62C P6SMB75CA P6SMB39CA P6SMB47 P6SMB250C P6SMB120C P6SMB51A P6SMB91 P6SMB110CA P6SMB20A P6SMB220CA P6SMB6.8C P6SMB27A P6SMB15 P6SMB530 P6SMB18 P6SMB82 P6SMB36A P6SMB120CA P6SMB22A P6SMB480 P6SMB56CA P6SMB68C P6SMB30A P6SMB10 P6SMB180 P6SMB16 P6SMB510A P6SMB8.2 P6SMB15CA P6SMB300CA P6SMB9.1A P6SMB110 P6SMB400CA P6SMB56 P6SMB18CA P6SMB150CA P6SMB180CA P6SMB8.2CA P6SMB75 P6SMB27C P6SMB12CA P6SMB30CA P6SMB39A P6SMB12 P6SMB550 P6SMB47CA P6SMB12C P6SMB180C P6SMB530A P6SMB150 P6SMB36C P6SMB200A P6SMB6.8CA P6SMB100C P6SMB82A P6SMB8.2C P6SMB43A P6SMB22CA P6SMB100A P6SMB480A P6SMB100CA P6SMB540CA P6SMB160A P6SMB160CA P6SMB200CA P6SMB7.5 P6SMB170C P6SMB160C P6SMB350CA P6SMB43CA P6SMB24A P6SMB13 P6SMB200C P6SMB13C P6SMB6.8 P6SMB7.5C P6SMB68CA P6SMB47A P6SMB43C P6SMB33A P6SMB110C P6SMB550C P6SMB9.1C P6SMB110A P6SMB250CA P6SMB18A P6SMB540A P6SMB51C