TVS Diodes Axial Leaded – 600W > P6KE series P6KE Series RoHS Pb e3 Description The P6KE Series is designed specifically to protect Bi-directional sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 600W peak pulse • Typical I less than 1μA R Uni-directional capability at 10/1000μs when V min>12V BR waveform, repetition rate • Compatible with high (duty cycles):0.01% temperature reflow • Glass passivated chip soldering (260°C/40 s) junction in DO-15 Package • V @ T= V @25°C BR J BR Agency Approvals • Fast response time: x (1+αT x (T - 25)) J typically less than 1.0ps (αT:Temperature from 0 Volts to BV min Coefficient, typical value Agency Agency File Number • Excellent clamping is 0.1%) E230531 capability • UL Recognized epoxy • Typical failure mode is meeting flammability short from over-specified classification V-0 Maximum Ratings and Thermal Characteristics voltage or current • Matte tin lead–free plated (T =25OC unless otherwise noted) A • Whisker test conducted • Halogen free and RoHS based on Table 4a and 4c compliant Parameter Symbol Value Unit of JEDEC JESD201A • Pb-free E3 means 2nd Peak Pulse Power Dissipation by 10/1000μs Test • IEC 61000-4-2 ESD level interconnect is Pb- P 600 W Waveform (Fig.2)(Note 1), (Note 4) PPM 30kV(Air), 30kV (Contact) free and the terminal finish Steady State Power Dissipation on Infinite Heat P 5.0 W • EFT protection of data material is tin(Sn) (IPC/ Sink at T=75ºC D L lines in accordance with JEDEC J-STD-609A.01) Peak Forward Surge Current, 8.3ms Single Half I 100 A IEC 61000-4-4 Sine Wave Unidirectional Only (Note 2) FSM Maximum Instantaneous Forward Voltage at 50A • Low incremental surge V 3.5/5.0 V for Unidirectional Only (Note 3) F resistance Operating Junction and Storage Temperature T, T -55 to 175 °C Range J STG Typical Thermal Resistance Junction to Lead R 20 °C/W ƟJL Typical Thermal Resistance Junction to Ambient R 75 °C/W ƟJA Applications Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. TVS components are ideal for the protection of I/O 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. V < 3.5V for single die parts and V< 5.0V for stacked-die parts. interfaces, V bus and other vulnerable circuits used in F F CC 4. The PPPM of stacked-die parts is 800W and please contact littelfuse for the detail stacked-die parts. telecom, computer, industrial and consumer electronic applications. Functional Diagram Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20

TVS Diodes Axial Leaded – 600W > P6KE series Electrical Characteristics (T=25°C unless otherwise noted) A Breakdown Test Maximum Maximum Maximum Agency Nu(PUmanrbti) e r NuP(mBarib)t e r Roeffv Ve(Vrosoletlat Ssg)tea VnRd V(Vooltltasg)e @ V BIRT CurIrTe nt CVlaomltapgineg PulseP eCaukr rent LRIeea@vke aVrgsee Approval Min. Max. (mA) VC @ Ipp (V) Ipp (A) R(µA)R P6KE6.8A P6KE6.8CA 5.80 6.45 7.14 10 10.5 58.1 1000 X P6KE7.5A P6KE7.5CA 6.40 7.13 7.88 10 11.3 54.0 500 X P6KE8.2A P6KE8.2CA 7.02 7.79 8.61 10 12.1 50.4 200 X P6KE9.1A P6KE9.1CA 7.78 8.65 9.55 1 13.4 45.5 50 X P6KE10A P6KE10CA 8.55 9.50 10.50 1 14.5 42.1 10 X P6KE11A P6KE11CA 9.40 10.50 11.60 1 15.6 39.1 5 X P6KE12A P6KE12CA 10.20 11.40 12.60 1 16.7 36.5 5 X P6KE13A P6KE13CA 11.10 12.40 13.70 1 18.2 33.5 1 X P6KE15A P6KE15CA 12.80 14.30 15.80 1 21.2 28.8 1 X P6KE16A P6KE16CA 13.60 15.20 16.80 1 22.5 27.1 1 X P6KE18A P6KE18CA 15.30 17.10 18.90 1 25.2 24.2 1 X P6KE20A P6KE20CA 17.10 19.00 21.00 1 27.7 22.0 1 X P6KE22A P6KE22CA 18.80 20.90 23.10 1 30.6 19.9 1 X P6KE24A P6KE24CA 20.50 22.80 25.20 1 33.2 18.4 1 X P6KE27A P6KE27CA 23.10 25.70 28.40 1 37.5 16.3 1 X P6KE30A P6KE30CA 25.60 28.50 31.50 1 41.4 14.7 1 X P6KE33A P6KE33CA 28.20 31.40 34.70 1 45.7 13.3 1 X P6KE36A P6KE36CA 30.80 34.20 37.80 1 49.9 12.2 1 X P6KE39A P6KE39CA 33.30 37.10 41.00 1 53.9 11.3 1 X P6KE43A P6KE43CA 36.80 40.90 45.20 1 59.3 10.3 1 X P6KE47A P6KE47CA 40.20 44.70 49.40 1 64.8 9.4 1 X P6KE51A P6KE51CA 43.60 48.50 53.60 1 70.1 8.7 1 X P6KE56A P6KE56CA 47.80 53.20 58.80 1 77.0 7.9 1 X P6KE62A P6KE62CA 53.00 58.90 65.10 1 85.0 7.2 1 X P6KE68A P6KE68CA 58.10 64.60 71.40 1 92.0 6.6 1 X P6KE75A P6KE75CA 64.10 71.30 78.80 1 103.0 5.9 1 X P6KE82A P6KE82CA 70.10 77.90 86.10 1 113.0 5.4 1 X P6KE91A P6KE91CA 77.80 86.50 95.50 1 125.0 4.9 1 X P6KE100A P6KE100CA 85.50 95.00 105.00 1 137.0 4.5 1 X P6KE110A P6KE110CA 94.00 105.00 116.00 1 152.0 4.0 1 X P6KE120A P6KE120CA 102.00 114.00 126.00 1 165.0 3.7 1 X P6KE130A P6KE130CA 111.00 124.00 137.00 1 179.0 3.4 1 X P6KE150A P6KE150CA 128.00 143.00 158.00 1 207.0 2.9 1 X P6KE160A P6KE160CA 136.00 152.00 168.00 1 219.0 2.8 1 X P6KE170A P6KE170CA 145.00 162.00 179.00 1 234.0 2.6 1 X P6KE180A P6KE180CA 154.00 171.00 189.00 1 246.0 2.5 1 X P6KE200A P6KE200CA 171.00 190.00 210.00 1 274.0 2.2 1 X P6KE220A P6KE220CA 185.00 209.00 231.00 1 328.0 1.9 1 X P6KE250A P6KE250CA 214.00 237.00 263.00 1 344.0 1.8 1 X P6KE300A P6KE300CA 256.00 285.00 315.00 1 414.0 1.5 1 X P6KE350A P6KE350CA 300.00 332.00 368.00 1 482.0 1.3 1 X P6KE400A P6KE400CA 342.00 380.00 420.00 1 548.0 1.1 1 X P6KE440A P6KE440CA 376.00 418.00 462.00 1 602.0 1.0 1 X P6KE480A P6KE480CA 408.00 456.00 504.00 1 658.0 0.9 1 X P6KE510A P6KE510CA 434.00 485.00 535.00 1 698.0 0.9 1 X P6KE530A P6KE530CA 451.00 503.50 556.50 1 725.0 0.8 1 X P6KE540A P6KE540CA 460.00 513.00 567.00 1 740.0 0.8 1 X P6KE550A P6KE550CA 468.00 522.50 577.50 1 760.0 0.8 1 X P6KE600A P6KE600CA 512.00 570.00 630.00 1 828.0 0.75 1 - For bidirectional type having V of 10 volts and less, the I limit is double. R R For parts without A , the V is ± 10% and V is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. BR C © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20

TVS Diodes Axial Leaded – 600W > P6KE series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients 100 W) TJ initial = TAMB k Voltage Across TVS er ( 10 stacked-die, 800W w at 10/1000µs, 25°C nt o oltage or Curre Current Through TVS ak Pulse P 1 Sati n1g0l/e1 0d0ie0,µ6s0,0 2W5° C V e P -M P P P 0.1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20

TVS Diodes Axial Leaded – 600W > P6KE series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 150 k Pulse Power (P) or Current (I)PPPPDerating in Percentage %125705050 I- Peak Pulse Current, % IPPMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M a Pe 0 td 0 25 50 75 100 125 150 175 200 0 0 1.0 2.0 3.0 4.0 T - Initial Junction Temperature (ºC) J t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100 10000.00 W) Uni-dire onal V=0V C/ 1000.00 Bi-direc nal V=0V °nce ( a ed 10 p m Cj(pf) 100.00 Uni-dire onal hermal I Bi-dVir=ecVRnal ent T 1 10.00 nsi a Tr 1.00 1.00 10.00 100.00 1000.00 0.1 VBR—Reverse Breakdown Voltage(V) 0.01 0.1 1 10 100 1000 TP-Pulse Duration (s) Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 120 100.0 Single die A) nt(100 e urve Curr 80 urrent(A) 10.0 Stacked-die S C ard 60 ard w w M -Peak For 2400 -IPeak ForF 1.0 S F I 0 1 10 100 0.1 Number of Cycles at 60 Hz 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 VF-Peak Forward Voltage(V) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20

TVS Diodes Axial Leaded – 600W > P6KE series Soldering Parameters Reflow Condition Lead–free assembly - Temperature Min (Ts(min)) 150°C TP tp Pre Heat - Temperature Max (Ts(max)) 200°C Ramp-up Critical Zone - Time (min to max) (ts) 60 – 120 secs TL tL TL to TP Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max e (T)Ts(max) RTSe(mflaox)w to TL - R- Taemmpp-uepra Rtuartee (TL) (Liquidus) 32°1C7°/sCe cond max emperaturTTs(min) Prethseat Ramp-down - Time (min to max) (t) 60 – 150 seconds L Peak Temperature (T) 260+0/-5 °C P 25˚C t 25˚C to Peak Time within 5°C of actual peak Temperature (t) 30 Seconds Max p Time (t) Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T) 8 minutes Max. P Do not exceed 260°C Flow/Wave Soldering (Solder Dipping) Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Physical Specificationst C Environmental Specifications Weight 0.015oz., 0.4g High Temp. Storage JESD22-A103 JEDEC DO-204AC (DO-15) molded plastic body HTRB JESD22-A108 Case over passivated junction. Temperature Cycling JESD22-A104 Polarity Color band denotes the cathode except Bipolar. H3TRB JESD22-A101 Matte Tin axial leads, solderable per Terminal RSH JESD22-B106 JESD22-B102. Dimensions Cathode Band Inches Millimeters D (for uni-directional products only) Dimensions Min Max Min Max C A 1.000 - 25.40 - B 0.230 0.300 5.80 7.60 A B A C 0.028 0.034 0.71 0.86 DO-204AC (DO-15) D 0.104 0.140 2.60 3.60 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20

TVS Diodes Axial Leaded – 600W > P6KE series Part Numbering System Part Marking System P6KExxxXXX Cathode Band Option Code: (for uni-directional Blank Reel Tape products only) -B Bulk Packaging F YYWW Type Code: Littelfuse Logo Trace Code Marking A Uni-Directional (5% V Voltage Tolerance) BR YY:Year Code CA Bi-Directional (5% V Voltage Tolerance) BR WW: Week Code V Voltage Code: BR (Refer to the Electrical Characteristics table) P6KEXXX Product Type Series Code Packaging Component Packaging Part Number Quantity Packaging Specification Package Option P6KExxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296 P6KExxxXX-B DO-204AC 1000 BULK Littelfuse Spec. Tape and Reel Specification Off Center (625.5.06) either side 2.0(6533+.00+.027.09//--10..00)39 0.028(0.7) 0.047 0.236 (1.2) (6.0) 0.197+/-0.020 (5.0+/- 0.5) Dimensions are in 13.0 inches/mm (330.2) 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Direction of Feed Recess Depth Max. 0.75 (19.05) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/20