Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series P6KE Series RoHS Pb e3 Description Bi-directional The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional • 600W peak pulse • Compatible with high capability at 10/1000μs temperature reflow waveform, repetition rate soldering (260°C/40 s) (duty cycles):0.01% • V @ T= V @25°C BR J BR • Glass passivated chip x (1+αT x (T - 25)) Agency Approvals J junction in DO-15 Package (αT:Temperature • Fast response time: Coefficient, typical value AGENCY AGENCY FILE NUMBER typically less than 1.0ps is 0.1%) E230531 from 0 Volts to BV min • IL Recognized epoxy • Excellent clamping meeting flammability Maximum Ratings and Thermal Characteristics capability classification V-0 (T =25OC unless otherwise noted) • Typical failure mode is • Matte tin lead–free plated A short from over-specified • Halogen free and RoHS Parameter Symbol Value Unit voltage or current compliant Peak Pulse Power Dissipation by • Whisker test conducted • Pb-free E3 means 2nd 10/1000μs Test Waveform (Fig.2) P 600 W based on Table 4a and 4c level interconnect is PPM (Note 1), (Note 4) of JEDEC JESD201A Pb-free and the terminal Steady State Power Dissipation on P 5.0 W • IEC-61000-4-2 ESD finish material is tin(Sn) Infinite Heat Sink at TL=75ºC D 30kV(Air), 30kV (Contact) (IPC/JEDEC J-STD- Peak Forward Surge Current, 8.3ms 609A.01) • EFT protection of data Single Half Sine Wave Unidirectional I 100 A Only (Note 2) FSM lines in accordance with Maximum Instantaneous Forward IEC 61000-4-4 Voltage at 50A for Unidirectional V 3.5/5.0 V F • Low incremental surge Only (Note 3) resistance Operating Junction and Storage Temperature Range TJ, TSTG -55 to 175 °C • Typical IR less than 1μA when V min>12V Typical Thermal Resistance BR R 20 °C/W Junction to Lead θJL Applications Typical Thermal Resistance R 75 °C/W Junction to Ambient θJA TVS components are ideal for the protection of I/O Notes: interfaces, V bus and other vulnerable circuits used in 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) = 25OC per Fig. 3. CC J telecom, computer, industrial and consumer electronic 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per applications. minute maximum. 3. V < 3.5V for single die parts and V< 5.0V for stacked-die parts. F F 4. The P of stacked-die parts is 800W and please contact littelfuse for the detail PPM stacked-die parts. Functional Diagram Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series Electrical Characteristics (T=25°C unless otherwise noted) A Reverse Breakdown Test Maximum Maximum Maximum Agency NuPmarbt e r NuPmarbt e r VSotlatangde o Vff V(Vooltlatsg)e @ V BIR CurIre nt CVlaomltapgineg PulseP eCaukr rent LReeavkeargsee Approval (Uni) (Bi) R T T I @ V (Volts) (mA) V @ I (V) I (A) R R MIN MAX C pp pp (µA) P6KE6.8A P6KE6.8CA 5.80 6.45 7.14 10 10.5 58.1 1000 X P6KE7.5A P6KE7.5CA 6.40 7.13 7.88 10 11.3 54.0 500 X P6KE8.2A P6KE8.2CA 7.02 7.79 8.61 10 12.1 50.4 200 X P6KE9.1A P6KE9.1CA 7.78 8.65 9.55 1 13.4 45.5 50 X P6KE10A P6KE10CA 8.55 9.50 10.50 1 14.5 42.1 10 X P6KE11A P6KE11CA 9.40 10.50 11.60 1 15.6 39.1 5 X P6KE12A P6KE12CA 10.20 11.40 12.60 1 16.7 36.5 5 X P6KE13A P6KE13CA 11.10 12.40 13.70 1 18.2 33.5 1 X P6KE15A P6KE15CA 12.80 14.30 15.80 1 21.2 28.8 1 X P6KE16A P6KE16CA 13.60 15.20 16.80 1 22.5 27.1 1 X P6KE18A P6KE18CA 15.30 17.10 18.90 1 25.2 24.2 1 X P6KE20A P6KE20CA 17.10 19.00 21.00 1 27.7 22.0 1 X P6KE22A P6KE22CA 18.80 20.90 23.10 1 30.6 19.9 1 X P6KE24A P6KE24CA 20.50 22.80 25.20 1 33.2 18.4 1 X P6KE27A P6KE27CA 23.10 25.70 28.40 1 37.5 16.3 1 X P6KE30A P6KE30CA 25.60 28.50 31.50 1 41.4 14.7 1 X P6KE33A P6KE33CA 28.20 31.40 34.70 1 45.7 13.3 1 X P6KE36A P6KE36CA 30.80 34.20 37.80 1 49.9 12.2 1 X P6KE39A P6KE39CA 33.30 37.10 41.00 1 53.9 11.3 1 X P6KE43A P6KE43CA 36.80 40.90 45.20 1 59.3 10.3 1 X P6KE47A P6KE47CA 40.20 44.70 49.40 1 64.8 9.4 1 X P6KE51A P6KE51CA 43.60 48.50 53.60 1 70.1 8.7 1 X P6KE56A P6KE56CA 47.80 53.20 58.80 1 77.0 7.9 1 X P6KE62A P6KE62CA 53.00 58.90 65.10 1 85.0 7.2 1 X P6KE68A P6KE68CA 58.10 64.60 71.40 1 92.0 6.6 1 X P6KE75A P6KE75CA 64.10 71.30 78.80 1 103.0 5.9 1 X P6KE82A P6KE82CA 70.10 77.90 86.10 1 113.0 5.4 1 X P6KE91A P6KE91CA 77.80 86.50 95.50 1 125.0 4.9 1 X P6KE100A P6KE100CA 85.50 95.00 105.00 1 137.0 4.5 1 X P6KE110A P6KE110CA 94.00 105.00 116.00 1 152.0 4.0 1 X P6KE120A P6KE120CA 102.00 114.00 126.00 1 165.0 3.7 1 X P6KE130A P6KE130CA 111.00 124.00 137.00 1 179.0 3.4 1 X P6KE150A P6KE150CA 128.00 143.00 158.00 1 207.0 2.9 1 X P6KE160A P6KE160CA 136.00 152.00 168.00 1 219.0 2.8 1 X P6KE170A P6KE170CA 145.00 162.00 179.00 1 234.0 2.6 1 X P6KE180A P6KE180CA 154.00 171.00 189.00 1 246.0 2.5 1 X P6KE200A P6KE200CA 171.00 190.00 210.00 1 274.0 2.2 1 X P6KE220A P6KE220CA 185.00 209.00 231.00 1 328.0 1.9 1 X P6KE250A P6KE250CA 214.00 237.00 263.00 1 344.0 1.8 1 X P6KE300A P6KE300CA 256.00 285.00 315.00 1 414.0 1.5 1 X P6KE350A P6KE350CA 300.00 332.00 368.00 1 482.0 1.3 1 P6KE400A P6KE400CA 342.00 380.00 420.00 1 548.0 1.1 1 P6KE440A P6KE440CA 376.00 418.00 462.00 1 602.0 1.0 1 P6KE480A P6KE480CA 408.00 456.00 504.00 1 658.0 0.9 1 P6KE510A P6KE510CA 434.00 485.00 535.00 1 698.0 0.9 1 P6KE530A P6KE530CA 451.00 503.50 556.50 1 725.0 0.8 1 P6KE540A P6KE540CA 460.00 513.00 567.00 1 740.0 0.8 1 P6KE550A P6KE550CA 468.00 522.50 577.50 1 760.0 0.8 1 P6KE600A P6KE600CA 512.00 570.00 630.00 1 828.0 0.75 1 For bidirectional type having V of 10 volts and less, the I limit is double. R R For parts without A , the V is ± 10% and V is 5% higher than with A parts BR C © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients 100 W) TJ initial = Tamb k Voltage Across TVS er ( 10 stacked-die, 800W w at 10/1000µs, 25°C nt o oltage or Curre Current Through TVS ak Pulse P 1 Sati n1g0l/e1 0d0ie0,µ6s0,0 2W5° C V e P -M P P P 0.1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d continues on next page. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 150 k Pulse Power (P) or Current (I)PPPPDerating in Percentage %125705050 I- Peak Pulse Current, % IPPMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M a Pe 0 td 0 25 50 75 100 125 150 175 200 0 0 1.0 2.0 3.0 4.0 T - Initial Junction Temperature (ºC) J t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100000 100 W) 10000 Uni-direc(cid:23)onal V=0V °e (C/ Bi-direc(cid:23)onal V=0V anc pF) 1000 mped 10 Cj ( mal I er h 100 Uni-direc(cid:23)onal ent T 1 Bi-direc(cid:23)onal nsi 10 V=VR Tra 1 0.1 1 10 100 1000 0.01 0.1 1 10 100 1000 V - Reverse Breakdown Voltage (V) TP-Pulse Duration (s) BR Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 120 100.0 Single die A) nt(100 e urve Curr 80 urrent(A) 10.0 Stacked-die S C ard 60 ard w w M -Peak For 2400 -IPeak ForF 1.0 S F I 0 1 10 100 0.1 Number of Cycles at 60 Hz 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 VF-Peak Forward Voltage(V) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C Ramp-up Critical Zone Pre Heat - Temperature Max (Tss(m(mina)x)) 200°C T) TL tL TL to TP - Time (min to max) (ts) 60 – 180 secs (ure Ts(max) Atov epreaagke ramp up rate (Liquidus Temp (TA) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A Reflow - Temperature (TA) (Liquidus) 217°C 25˚C t 25˚C to Peak Time (t) - Time (min to max) (t) 60 – 150 seconds s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak Flow/Wave Soldering (Solder Dipping) 20 – 40 seconds Temperature (t) p Ramp-down Rate 6°C/second max Peak Temperature : 265OC Time 25°C to peak Temperature (T) 8 minutes Max. Dipping Time : 10 seconds P Do not exceed 260°C Soldering : 1 time Physical Specificationst C Environmental Specifications Weight 0.015oz., 0.4g High Temp. Storage JESD22-A103 JEDEC DO-204AC (DO-15) molded Case plastic body over passivated junction. HTRB JESD22-A108 Color band denotes the cathode except Polarity Temperature Cycling JESD22-A104 Bipolar. Matte Tin axial leads, solderable per H3TRB JESD22-A101 Terminal JESD22-B102. RSH JESD22-B106 Dimensions Cathode Band D (for uni-directional products only) Inches Millimeters Dimensions Min Max Min Max C A 1.000 - 25.40 - A B A B 0.230 0.300 5.80 7.60 C 0.028 0.034 0.71 0.86 DO-204AC (DO-15) D 0.104 0.140 2.60 3.60 © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series Part Numbering System Part Marking System P6KExxxXXX Cathode Band OPTION CODE: (for uni-directional BLANK Reel Tape products only) F -B Bulk Packaging YYWW TYPE CODE: Littelfuse Logo Trace Code Marking A Uni-Directional (5% V Voltage Tolerance) YY:Year Code CA Bi-Directional (5% V B VRoltage Tolerance) WW: Week Code BR P6KEXXX VBR VOLTAGE CODE Product Type (Refer to the Electrical Characteristics table) SERIES CODE Packaging Component Packaging Part Number Quantity Packaging Specification Package Option P6KExxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296 P6KExxxXX-B DO-204AC 1000 BULK Littelfuse Spec. Tape and Reel Specification Off Center (625.5.06) either side 2.0(5633.+00+.20.709//--10..00)39 0.028(0.7) 0.047 0.236 (1.2) (6.0) 0.197+/-0.020 (5.0+/- 0.5) Dimensions are in 13.0 inches/mm (330.2) 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Direction of Feed Recess Depth Max. 0.75 (19.05) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/22/17

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L ittelfuse: P6KE510A P6KE110CA P6KE11CA P6KE170 P6KE24 P6KE300CA P6KE68C P6KE220A P6KE10CA-B P6KE13A P6KE15A-B P6KE18A P6KE200C P6KE56CA P6KE12A-B P6KE150A-B P6KE250C P6KE110A P6KE160 P6KE16CA P6KE200A P6KE24CA P6KE36A P6KE6.8CA P6KE400A P6KE51CA P6KE350CA P6KE120A P6KE200 P6KE20CA P6KE440A P6KE68 P6KE7.5 P6KE7.5CA-B P6KE10 P6KE160A P6KE170CA P6KE220C P6KE68CA P6KE130CA-B P6KE24A-B P6KE440CA-B P6KE440CA-TB P6KE170CA-B P6KE600A P6KE600CA P6KE600CA-B P6KE530CA P6KE130A P6KE56 P6KE68A P6KE91C P6KE130 P6KE20C P6KE27C P6KE12CA P6KE33CA P6KE16 P6KE18 P6KE20A-B P6KE36 P6KE82CA P6KE180A P6KE51C P6KE9.1A P6KE150A P6KE160CA P6KE47A-B P6KE7.5CA P6KE24C P6KE30C P6KE33CA-B P6KE75C P6KE56A P6KE6.8CA-B P6KE62A P6KE62CA P6KE10A P6KE15C P6KE350 P6KE250CA P6KE62C P6KE100A P6KE10C P6KE22CA P6KE350A P6KE550C P6KE180CA P6KE20 P6KE22A P6KE7.5A P6KE550CA P6KE9.1 P6KE27A P6KE30 P6KE33 P6KE47A P6KE43CA-B P6KE43 P6KE47