PCB Relay G6DS Slim, Miniature Relay with 1-pole 5-A Switching Capability ■ Slim 5-mm width and miniature size. (20.3 × 5.08 × 12.5 mm max.) ■ Ideal for high-density mounting. ■ Delivers high switching performance (5 A at 250VAC/30 VDC) and enables various loads all in a slim, miniature size. ■ Highly sensitive coil type (120 mW) also available. ■ Satisfies EN 61131-2 (PLC) and EN 61010 (measuring instrument/control equipment) reinforced insulation requirement. ■ RoHS compliant. Applications: PLCs, I/O modules, I/O ports, Timers, Temperature Controllers, and Control Boards. Ordering Information Classification Contact form Enclosure ratings Model Standard SPST-NO Fully sealed G6DS-1A High-sensitivity G6DS-1A-H Note: When ordering, add the rated coil voltage to the model number. Example: G6DS-1A 12 VDC Rated coil voltage Model Number Legend G6DS - - VDC 1 2 3 4 1. Number of Poles 3. Classification 4. Rated Coil Voltage 1: 1 pole None: Standard 5, 12, 24 VDC 2. Contact Form H: High-sensitivity A: SPST-NO 1

G6DS G6DS ■ Coil Ratings Item Standard High-sensitivity Rated voltage 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC Rated current 36 mA 15 mA 7.5 mA 24 mA 10 mA 5 mA Coil resistance 139 Ω 800 Ω 3,200 Ω 208 Ω 1,200 Ω 4,800 Ω Must operate voltage 70% max. of rated voltage Must release voltage 5% min. of rated voltage Max. voltage 160% of rated voltage (at 23°C) Power consumption Approx. 180 mW Approx. 120 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23°C. 3. “Max. voltage” refers to the maximum voltage that can be applied to the relay coil. It is not the maximum voltage that can be applied continuously. ■ Contact Ratings Item Resistive load (cos φ=1) Inductive load (cos φ=0.4, L/R=7 ms) Rated load 5 A at 250 VAC, 5 A at 30 VDC 2 A at 250 VAC, 2 A at 30 VDC Rated carry current 5 A Max. switching voltage 250 VAC, 30 VDC Max. switching current 5 A Max. switching power 1,250 VA, 150 W Failure rate (reference value) 5 mA at 24 VDC (See note.) Note: P level: λ 60 = 0.1 × 10-6 operation ■ Characteristics Contact resistance (See note 1.) 100 mΩ max. Operate time 10 ms max. Release time 5 ms max. Insulation resistance (See note 2.) 1,000 MΩ min. (at 500 VDC) Dielectric strength 3,000 VAC, 50/60 Hz for 1 min between coil and contacts 750 VAC, 50/60 Hz for 1 min between contacts of same polarity Impulse withstand voltage 6,000 V (1.2 x 50 µs) between coil and contacts Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Shock resistance Destruction: 1,000 m/s2 Malfunction: 150 m/s2 (standard type). 130 m/s2 (high-sensitivity type) Endurance Mechanical: 20,000,000 operations min. (at 18,000 operations/hr) Electrical: 100,000 operations min. (at 1,800 operations/hr) for standard type. 80,000 operations min. (at 1,800 operations/hr) for high-sensitivity type. (at 23°C) Ambient temperature Operating: −40°C to 85°C (with no icing) Ambient humidity Operating: 5% to 85% Weight Approx. 2.3 g Note: The data shown above are initial values. 1. The contact resistance is possible with 1 A applied at 5 VDC using a fall-of-potential method. 2. The insulation resistance is possible between coil and contacts and between contacts of the same polarity at 500 VDC. 2

G6DS G6DS Engineering Data Maximum Switching Power Endurance Ambient Temperature vs. Maximum Coil Voltage Switching current (A)315531000 DloCDad Cre isnidsutivcetive AloCad indAuCc trievsei stive load 4ndurance (x10 operations)351030051000000 250-VACS/t3a0n-dVaHDrdiCg th yr-epsseeisntsiviteiv liotya tdype Maximum coil voltage (%)111128642000000 0.5 load cosφ=0.4 E 5 250-VAC/30 VDC inductive load 100 (cosφ=0.4/ L/R=7 ms) 0.3 3 80 0.10 3 5 10 30 100 250 5001,000 0 1 2 3 4 5 6 7 8 9 10 600 23 30 40 50 60 70 808590 Switching voltage (V) Switching current (A) Ambient temperature (°C) Note: The maximum coil voltage is the maximum voltage that can be Ambient Temperature vs. Malfunctioning Shock applied to the relay coil Operating/Recovery Voltage G6DS-1A G6DS-1A %)90 Energized Y e (80 max. Not energized 1000 oltag70 ave. 680000 ed v60 min. X 400 Z Ratio of rat4500 2000 Shock direction 30 Z' X' YX X' Z 20 max. Z' ave. Y' 10 min. Y' Units: m/s2 Coil terminals 0−60 −40 −20 0 20 40 60 80 100 Measurement conditions: Impose a shock in the ±X, Ambient temperature (˚C) ±Y, and ±Z directions three times each with the Relay energized to check the shock values that cause the Relay to malfunction. ■ Approved Standards (cid:127)The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog. UL 508 (File No. E41515)/CSA C22.2 No.14 (File No. LR31928) Model Contact form Coil ratings Contact ratings G6DS-1A SPST-NO 5 to 24 VDC 5 A, 250 VAC (Resistive & General Use) 5 A, 30 VDC (Resistive & General Use) G6DS-1A-H 5 A, 250 VAC (Resistive & General Use) 5 A, 30 VDC (Resistive & General Use) VDE (EN61810-1) (License No. B161) Model Contact form Coil ratings Contact ratings G6DS-1A SPST-NO 5, 12, 24 VDC 5 A, 250 VAC (cosφ=1.0) 5 A, 30 VDC (0 ms) G6DS-1A-H 5 A, 250 VAC (cosφ=1.0) 5 A, 30 VDC (0 ms) 3

G6DS G6DS Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement/ G6D-1A/1A-H Internal Connections (Bottom View) 20.3 max. (20.0) 5.08 max. (5.0) Mounting Holes (Bottom View) 10.16±0.1 5.08±0.1 2.54±0.1 6) 2 (1.11) (1.11) 1. 0.30.3 0.3 0.3 0.80.6 3.3 5 max. (12.4) Four, 1.1 dia. 1.2) (4±0.1 12. ( 2.5 Packing ■ Stick packing 1 stick = 25 relays 1 packing case = 20 sticks (500 relays) 1 carton box = 6 packing cases (3,000 relays) Precautions More than two relays can be closely mounted right side up as shown in the following illustration. 5.08 mm Current flow: 5 A max. More than two relays can be closely mounted upside down as shown in the following illustration. 7.62 mm in the upside-down direction Current flow: 2 A max. 2.54 mm Note: The space between each relay required for heat radiation may vary with operating conditions. Contact your OMRON representative for details.

Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the part of all quotations, acknowledgments, invoices, purchase orders and other Products will be free from defects in materials and workmanship for a period of documents, whether electronic or in writing, relating to the sale of products or twelve months from the date of sale by Seller (or such other period expressed services (collectively, the "Products") by Omron Electronic Components LLC in writing by Seller). Seller disclaims all other warranties, express or implied. ("Seller"). Seller hereby objects to any terms or conditions proposed in (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, Buyer's purchase order or other documents which are inconsistent with, or in EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- addition to, these Terms. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Prices; Payment. All prices stated are current, subject to change without BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE notice by Seller. Buyer agrees to pay the price in effect at time of shipment. PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR Payments for Products received are due net 30 days unless otherwise stated INTENDED USE. Seller further disclaims all warranties and responsibility of in the invoice. any type for claims or expenses based on infringement by the Products or oth- 3. Discounts. Cash discounts, if any, will apply only on the net amount of erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli- invoices sent to Buyer after deducting transportation charges, taxes and gation hereunder shall be to replace (in the form originally shipped with Buyer duties, and will be allowed only if (i) the invoice is paid according to Seller's responsible for labor charges for removal or replacement thereof) the non- payment terms and (ii) Buyer has no past due amounts owing to Seller. complying Product or, at Seller's election, to repay or credit Buyer an amount 4. Currencies. If the prices quoted herein are in a currency other than U.S. dol- equal to the purchase price of the Product; provided that in no event shall lars, Buyer shall make remittance to Seller at the then current exchange rate Seller be responsible for warranty, repair, indemnity or any other claims or most favorable to Seller and which is available on the due date; provided that if expenses regarding the Products unless Seller's analysis confirms that the remittance is not made when due, Buyer will convert the amount to U.S. dol- Products were properly handled, stored, installed and maintained and not sub- lars at the then current exchange rate most favorable to Seller available during ject to contamination, abuse, misuse or inappropriate modification. Return of the period between the due date and the date remittance is actually made. any Products by Buyer must be approved in writing by Seller before shipment. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all Seller shall not be liable for the suitability or unsuitability or the results from the costs involved in, obtaining any government approvals required for the impor- use of Products in combination with any electrical or electronic components, tation or sale of the Products. circuits, system assemblies, or any other materials or substances or environ- 6. Taxes. All taxes, duties and other governmental charges (other than general ments. Any advice, recommendations or information given orally or in writing real property and income taxes), including any interest or penalties thereon, are not to be construed as an amendment or addition to the above warranty. imposed directly or indirectly on Seller or required to be collected directly or 13.Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, indirectly by Seller for the manufacture, production, sale, delivery, importation, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF consumption or use of the Products sold hereunder (including customs duties PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON- and sales, excise, use, turnover and license taxes) shall be charged to and NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN remitted by Buyer to Seller. CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory no event shall liability of Seller exceed the individual price of the Product on to Seller, Seller reserves the right to stop shipments or require satisfactory which liability is asserted. security or payment in advance. If Buyer fails to make payment or otherwise 14.Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and comply with these Terms or any related agreement, Seller may (without liability its employees from and against all liabilities, losses, claims, costs and and in addition to other remedies) cancel any unshipped portion of Products expenses (including attorney's fees and expenses) related to any claim, inves- sold hereunder and stop any Products in transit until Buyer pays all amounts, tigation, litigation or proceeding (whether or not Seller is a party) which arises including amounts payable hereunder, whether or not then due, which are or is alleged to arise from Buyer's acts or omissions under these Terms or in owing to it by Buyer. Buyer shall in any event remain liable for all unpaid any way with respect to the Products. Without limiting the foregoing, Buyer (at accounts. its own expense) shall indemnify and hold harmless Seller and defend or settle 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation any action brought against Seller to the extent that it is based on a claim that unless Buyer indemnifies Seller fully against all costs or expenses arising in any Product made to Buyer specifications infringed intellectual property rights connection therewith. of another party. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15.Property; Confidentiality. The intellectual property embodied in the Products is resulting from causes beyond its control, including earthquakes, fires, floods, the exclusive property of Seller and its affiliates and Buyer shall not attempt to strikes or other labor disputes, shortage of labor or materials, accidents to duplicate it in any way without the written permission of Seller. Notwithstand- machinery, acts of sabotage, riots, delay in or lack of transportation or the ing any charges to Buyer for engineering or tooling, all engineering and tooling requirements of any government authority. shall remain the exclusive property of Seller. All information and materials sup- 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: plied by Seller to Buyer relating to the Products are confidential and propri- 1. Shipments shall be by a carrier selected by Seller; etary, and Buyer shall limit distribution thereof to its trusted employees and 2. Such carrier shall act as the agent of Buyer and delivery to such carrier strictly prevent disclosure to any third party. shall constitute delivery to Buyer; 16.Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right 3.All sales and shipments of Products shall be FOB shipping point (unless and no course of dealing between Buyer and Seller shall operate as a waiver otherwise stated in writing by Seller), at which point title to and all risk of of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder loss of the Products shall pass from Seller to Buyer, provided that Seller without Seller's written consent. (c) Law. These Terms are governed by Illi- shall retain a security interest in the Products until the full purchase price is nois law (without regard to conflict of law principles). Federal and state courts paid by Buyer; in Illinois shall have exclusive jurisdiction for any dispute hereunder. 4. Delivery and shipping dates are estimates only. (d)Amendment. These Terms constitute the entire agreement between Buyer 5.Seller will package Products as it deems proper for protection against and Seller relating to the Products, and no provision may be changed or normal handling and extra charges apply to special conditions. waived unless in writing signed by the parties. (e) Severability. If any provision 11.Claims. Any claim by Buyer against Seller for shortage or damage to the hereof is rendered ineffective or invalid, such provision shall not invalidate any Products occurring before delivery to the carrier must be presented in writing other provision. (f) Setoff. Buyer shall have no right to set off any amounts to Seller within 30 days of receipt of shipment and include the original trans- against the amount owing in respect of this invoice.. (g) Definitions. As used portation bill signed by the carrier noting that the carrier received the Products herein, "including" means "including without limitation". from Seller in the condition claimed.

Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's dards, codes or regulations which apply to the combination of the Product in programming of a programmable product, or any consequence thereof. Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a vide applicable third party certification documents identifying ratings and limita- guide for the user in determining suitability and does not constitute a warranty. tions of use which apply to the Product. This information by itself is not It may represent the result of Seller's test conditions, and the users must corre- sufficient for a complete determination of the suitability of the Product in combi- late it to actual application requirements. Actual performance is subject to nation with the end product, machine, system, or other application or use. Seller's Warranty and Limitations of Liability. Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be ular Product with respect to Buyer's application, product or system. Buyer changed at any time based on improvements and other reasons. It is our prac- shall take application responsibility in all cases but the following is a non- tice to change part numbers when published ratings or features are changed, exhaustive list of applications for which particular attention must be given: or when significant construction changes are made. However, some specifica- (i)Outdoor use, uses involving potential chemical contamination or electrical tions of the Product may be changed without any notice. When in doubt, spe- interference, or conditions or uses not described in this document. cial part numbers may be assigned to fix or establish key specifications for your (ii)Energy control systems, combustion systems, railroad systems, aviation application. Please consult with your Seller representative at any time to con- systems, medical equipment, amusement machines, vehicles, safety firm actual specifications of purchased Product. equipment, and installations subject to 5. Errors and Omissions. The information in this publication has been carefully separate industry or government regulations. checked and is believed to be accurate; however, no responsibility is assumed (iii)Use in consumer products or any use in significant quantities. for clerical, typographical or proofreading errors, or omissions. (iv)Systems, machines and equipment that could present a risk to life or 6. RoHS Compliance. Where indicated, our products currently comply, to the best property. Please know and observe all prohibitions of use applicable to this of our knowledge as of the date of this publication, with the requirements of the product. European Union's Directive on the Restriction of certain Hazardous Sub- NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS stances ("RoHS"), although the requirements of RoHS do not take effect until RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM July 2006. These requirements may be subject to change. Please consult our AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT website for current information. THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC OMRON CANADA, INC. OMRON ON-LINE COMPONENTS LLC 885 Milner Avenue Global - http://www.omron.com 55 E. Commerce Drive, Suite B Toronto, Ontario M1B 5V8 USA - http://www.components.omron.com Schaumburg, IL 60173 416-286-6465 Canada - http://www.omron.ca 847-882-2288 Cat. No. K130-E1-01 6/05 Specifications subject to change without notice Printed in USA