SIDACtor® Protection Thyristors LCAS Protection Asymmetrical Discrete Series - DO-214 RoHS Pb e3 Description The Asymmetrical Discrete Series are SIDACtor® components designed to protect LCAS (Line Circuit Access Switch) devices from damaging overvoltage transients. The series provides a specialized asymmetrical overvoltage protection solution that enables equipment to comply with various global requlatory standards. Features and Benefits • Low voltage overshoot ratings • Low on-state voltage • LCAS specific tip and ring thresholds Agency Approvals • Does not degrade surge capability after multiple • RoHS Compliant, Lead- surge events within Free, and Halogen-Free Agency Agency File Number limit. • 2nd level interconnect is E133083 • Fails short circuit when Pb-free per IPC/JEDEC surged in excess of J-STD-609A.01 Pinout Designation Applicable Global Standards Not Applicable • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd Schematic Symbol • ITU K.20/21 Enhanced edition Level* • YD/T 1082 • ITU K.20/21 Basic Level • YD/T 993 • GR 1089 Inter-building* • YD/T 950 *A/B-rated parts require series resistance Additional Information Datasheet Resources Samples Electrical Characteristics V V V Capacitance DRM S I I I T @l =5µA @100V/µs H S T @I=2.2 A @1MHz, 2V bias Part Number Marking DRM T V min V max mA min mA max A max V max pF min pF max P1200SALRP P12A 100 130 120 800 2.2 4 15 40 P2000SALRP P20A 180 220 120 800 2.2 4 15 35 P2500SALRP P25A 230 290 120 800 2.2 4 15 35 P1200SBLRP P12B 100 130 120 800 2.2 4 20 50 P2000SBLRP P20B 180 220 120 800 2.2 4 20 50 P2500SBLRP P25B 230 290 120 800 2.2 4 20 50 P1200SCLRP P12C 100 130 120 800 2.2 4 20 35 P2000SCLRP P20C 180 220 120 800 2.2 4 25 35 P2500SCLRP P25C 230 290 120 800 2.2 4 30 70 Notes: - Absolute maximum ratings measured at T= 25ºC (unless otherwise noted). A - Components are bi-directional. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16

SIDACtor® Protection Thyristors LCAS Protection Surge Ratings I eries 00..52//730100 12 22//1100 12 18.2/2/500 1 2 1100//116600 12 1100//P55P6600 12 59//372200 12 1100//336600 12 1100//11000000 12 150//371000 1 2 50/I6TS0M Hz di/dt S A min A min A min A min A min A min A min A min A min A min Amps/µs max A 20 150 150 90 50 75 75 45 75 25 500 B 25 250 250 150 100 100 125 80 100 30 500 C 50 500 400 200 150 200 175 100 200 35 500 Notes: 1 Current waveform in µs - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product. PP 2 Voltage waveform in µs - I ratings applicable over temperature range of -40ºC to +85ºC PP - The component must initially be in thermal equilibrium with -40°C < T < +150°C J Thermal Considerations Package Symbol Parameter Value Unit DO-214AA T Operating Junction Temperature Range -40 to +150 °C J T Storage Temperature Range -65 to +150 °C S R Thermal Resistance: Junction to Ambient 90 °C/W 0JA V-I Characteristics t x t Pulse Waveform r d +I PP tr = rise time to peak value IT – %I100 PVaelauke td = decay time to half value IIHS urrent Waveform = tr x td C IDRM se -V +V ul 50 Half Value P VT VDRM eak P VS – P P I 0 tr td 0 t – Time (µs) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 14 2.0 % 12 1.8 – C) Change 1068 IHT= 25ºC 11..64 V S 4 25 °C I(H 1.2 25°C nt of 02 o of 1.0 erce -4 Rati 00..86 P -6 -8 0.4 -40 -20 0 20 40 60 80 100120140 160 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (T ) – °C Case Temperature (T ) - ºC J C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16

SIDACtor® Protection Thyristors LCAS Protection Soldering Parameters Pb-Free assembly Reflow Condition (see Fig. 1) Figure 1 t - Temperature Min (T ) +150°C P s(min) T P Pre Heat - Temperature Max (T ) +200°C Critical Zone s(max) Ramp-up TL to TP - Time (Min to Max) (t) 60-180 secs. s T Average ramp up rate (Liquidus Temp (T) L t to peak) L 3°C/sec. Max. erTS(max) L u T to T - Ramp-up Rate 3°C/sec. Max. ta S(max) L r Ramp-down e - Temperature (T) (Liquidus) +217°C p Preheat Reflow L mTS(min) - Temperature (t) 60-150 secs. e t L T S Peak Temp (T) +260(+0/-5)°C P 25 Time within 5°C of actual Peak Temp (t) 30 secs. Max. p time to peak temperature Time (t 25ºC to peak) Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (T) 8 min. Max. P Do not exceed +260°C Physical Specifications Environmental Specifications 80% Rated V (V Peak) +125°C or +150°C, Lead Material Copper Alloy High Temp Voltage DRM AC 504 or 1008 hrs. MIL-STD-750 (Method 1040) Blocking JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated -65°C to +150°C, 15 min. dwell, 10 up to 100 Temp Cycling cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, UL recognized epoxy meeting flammability JESD22-A104 Body Material classification V-0 Biased Temp & 52 V (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ DC Humidity JEDEC, JESD22-A-101 +150°C 1008 hrs. MIL-STD-750 (Method 1031) High Temp Storage JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ Cooker Test) JEDEC, JESD22-A-102 Resistance to Solder +260°C, 30 secs. MIL-STD-750 (Method 2031) Heat LCAS Series DO-214.EPS Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles Level (+260°C Peak). JEDEC-J-STD-020, Level 1 For pg. 154 Part Numbering Part Marking Pxxx0SxLRP TYPE Pxxx Part Marking Code P: SIDACtor (Refer to Electrical Characteristics Table) MEDIAN VOLTAGE REEL PACK xxxxx Date Code CONSTRUCTION VARIABLE RoHS COMPLIANT PACKAGE TYPE I RATING PP © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16

SIDACtor® Protection Thyristors LCAS Protection Dimensions — DO-214AA Case Pad Outline Inches Millimeters B Temperature 0.079 Dimensions D Measurement (2.0) Min Max Min Max Point A 0.130 0.156 3.30 3.95 C A 0(2.1.180) B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 0(.20.709) inch D 0.159 0.181 4.05 4.60 (millimeter) E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 H F G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 E K G K 0.006 0.016 0.15 0.41 Packing Options Package Type Description Quantity Added Suffix Industry Standard DO-214AA S 2500 RP EIA-481-D Tape & Reel Pack Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 0.059 DIA Cover tape (8.0) (1.5) 12.99 (330.0) Dimensions are in inches 0.512 (13.0) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.4) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16