SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Protection Thyristor Series - DO-214 RoHS Pb e3 Description Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits • Low voltage overshoot • Fails short circuit when surged in excess of • Low on-state voltage ratings Agency Approvals • Does not degrade surge • 2nd level interconnect is capability after multiple Pb-free per IPC/JEDEC surge events within AGENCY AGENCY FILE NUMBER J-STD-609A.01 limit. E133083 • RoHS compliant, lead- • Low capacitance free and halogen-free. Pinout Designation Applicable Global Standards Not Applicable • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd Schematic Symbol edition • ITU K.20/21/45 Enhanced Level* • YD/T 1082 • ITU K.20/21/45 Basic • YD/T 993 Level • YD/T 950 • GR 1089 Inter-building* *A/B-rated parts require series resistance Electrical Characteristics V V V Capacitance DRM S I I I T Part Number Marking @l =5µA @100V/µs H S T @I=2.2 Amps @1MHz, 2V bias DRM T V min V max mA min mA max A max V max pF min pF max P0080SALRP P-8A 6 25 50 800 2.2 4 20 35 P0220SALRP P22A 15 32 50 800 2.2 4 20 40 P0300SALRP P03A 25 40 50 800 2.2 4 15 40 P0640SALRP P06A 58 77 150 800 2.2 4 15 40 P0720SALRP P07A 65 88 150 800 2.2 4 15 40 P0900SALRP P09A 75 98 150 800 2.2 4 15 40 P1100SALRP P11A 90 130 150 800 2.2 4 15 40 P1300SALRP P13A 120 160 150 800 2.2 4 15 40 P1500SALRP P15A 140 180 150 800 2.2 4 15 40 P1800SALRP P18A 170 220 150 800 2.2 4 15 35 P2100SALRP P21A 180 240 150 800 2.2 4 15 35 P2300SALRP P23A 190 260 150 800 2.2 4 15 35 P2600SALRP P26A 220 300 150 800 2.2 4 15 35 P3100SALRP P31A 275 350 150 800 2.2 4 15 35 P3500SALRP P35A 320 400 150 800 2.2 4 15 35 P0080SBLRP P-8B 6 25 50 800 2.2 4 20 50 P0220SBLRP P22B 15 32 50 800 2.2 4 20 50 P0300SBLRP P03B 25 40 50 800 2.2 4 15 50 P0640SBLRP P06B 58 77 150 800 2.2 4 20 50 P0720SBLRP P07B 65 88 150 800 2.2 4 20 50 Table continues on next page. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17

SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Parameters (continued) V V V Capacitance DRM S I I I T Part Number Marking @l =5µA @100V/µs H S T @I=2.2 Amps @1MHz, 2V bias DRM T V min V max mA min mA max A max V max pF min pF max P0900SBLRP P09B 75 98 150 800 2.2 4 20 50 P1100SBLRP P11B 90 130 150 800 2.2 4 20 50 P1300SBLRP P13B 120 160 150 800 2.2 4 20 50 P1500SBLRP P15B 140 180 150 800 2.2 4 20 50 P1800SBLRP P18B 170 220 150 800 2.2 4 20 50 P2100SBLRP P21B 180 240 150 800 2.2 4 20 35 P2300SBLRP P23B 190 260 150 800 2.2 4 20 50 P2600SBLRP P26B 220 300 150 800 2.2 4 20 35 P3100SBLRP P31B 275 350 150 800 2.2 4 20 35 P3500SBLRP P35B 320 400 150 800 2.2 4 20 35 P4500SBLRP P45B 400 530 150 800 2.2 4 20 50 P0080SCLRP P-8C 6 25 50 800 2.2 4 25 70 P0220SCLRP P22C 15 32 50 800 2.2 4 25 70 P0300SCLRP P03C 25 40 50 800 2.2 4 20 50 P0640SCLRP P06C 58 77 150 800 2.2 4 45 100 P0720SCLRP P07C 65 88 150 800 2.2 4 45 100 P0900SCLRP P09C 75 98 150 800 2.2 4 45 100 P1100SCLRP P11C 90 130 150 800 2.2 4 45 90 P1300SCLRP P13C 120 160 150 800 2.2 4 40 85 P1500SCLRP P15C 140 180 150 800 2.2 4 25 70 P1800SCLRP P18C 170 220 150 800 2.2 4 25 70 P2100SCLRP P21C 180 240 150 800 2.2 4 25 70 P2300SCLRP P23C 190 260 150 800 2.2 4 25 70 P2600SCLRP P26C 220 300 150 800 2.2 4 30 70 P3100SCLRP P31C 275 350 150 800 2.2 4 30 70 P3500SCLRP P35C 320 400 150 800 2.2 4 25 65 P4500SCLRP P45C 400 530 150 800 2.2 4 25 65 P4500SCLHLRP* P45L 400 530 50 800 2.2 4 20 50 Notes: - Absolute maximum ratings measured at T= 25ºC (unless otherwise noted). A - Components are bi-directional. - * P4500SCLHLRP is low I product H Surge Ratings I eries 00..52//730100 12 22//1100 12 18.2/2/500 1 2 1100//116600 12 1100//55P66P00 12 59//372200 12 1100//336600 12 1100//11000000 12 150//371000 1 2 50/I6TS0M Hz di/dt S A min A min A min A min A min A min A min A min A min A min Amps/µs max A 20 150 150 90 50 75 75 45 75 25 500 B 25 250 250 150 100 100 125 80 100 30 500 C 50 500 400 200 150 200 175 100 200 3 35 500 Notes: - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product. PP 1 Current waveform in µs - IPP ratings applicable over temperature range of -40ºC to +85ºC 2 Voltage waveform in µs - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C 3 For surge rating of P4500SCLRP 10/700µs min=150A & typical=180A For surge rating of P4500SCLHLRP 10/700µs min=150A © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17

SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Thermal Considerations Package Symbol Parameter Value Unit DO-214AA T Operating Junction Temperature Range -40 to +150 °C J T Storage Temperature Range -65 to +150 °C S R Thermal Resistance: Junction to Ambient 90 °C/W 0JA V-I Characteristics t x t Pulse Waveform r d +I PP tr = rise time to peak value %I Peak td = decay time to half value IT – 100 Value IIHS urrent Waveform = tr x td C IDRM se -V +V ul 50 Half Value P VT VDRM ak e VS – P P P I 0 tr td 0 t – Time (µs) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 % 12 C) e – 10 25º 1.6 ang 8 IH = C 1.4 h 6 T VC S 4 25 °C I(H 1.2 25°C of 2 of 1.0 ent 0 tio 0.8 erc -4 Ra 0.6 P -6 -8 0.4 -40 -20 0 20 40 60 80 100120140 160 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (T ) – °C Case Temperature (T ) - ºC J C Additional Information Datasheet Resources Samples © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17

SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly Reflow Condition (see Fig. 1) Figure 1 t P - Temperature Min (Ts(min)) +150°C TP Critical Zone Pre Heat - Temperature Max (Ts(max)) +200°C Ramp-up TL to TP Atov pereaagke) ram- Tpim uep ( Mrainte t o(L Miqauxi)d (tus)s Temp (TL) 630°C-1/s8e0c s. eMcsa.x. eruTS(mTaxL) tL t a T to T - Ramp-up Rate 3°C/sec. Max. r Ramp-down S(max) L e p Preheat Reflow - Temperature (TL) (Liquidus) +217°C meTS(min) t - Temperature (t) 60-150 secs. T S L Peak Temp (T) +260(+0/-5)°C P 25 Time within 5°C of actual Peak Temp (tp) 30 secs. Max. time (tto 2 p5eºCak t ote pmepake)rature Time Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (T) 8 min. Max. P Do not exceed +260°C Physical Specifications Environmental Specifications 80% Rated V (V Peak) +125°C or +150°C, Lead Material Copper Alloy High Temp Voltage DRM AC 504 or 1008 hrs. MIL-STD-750 (Method 1040) Blocking JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated -65°C to +150°C, 15 min. dwell, 10 up to 100 Temp Cycling cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, UL recognized epoxy meeting flammability JESD22-A104 Body Material classification V-0 Biased Temp & 52 V (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ DC Humidity JEDEC, JESD22-A-101 +150°C 1008 hrs. MIL-STD-750 (Method 1031) High Temp Storage JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ Cooker Test) JEDEC, JESD22-A-102 Resistance to Solder +260°C, 30 secs. MIL-STD-750 (Method 2031) Heat Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles Level (+260°C Peak). JEDEC-J-STD-020, Level 1 Part Numbering Part Marking P xxx0 S x LRP TYPE REEL PACK Pxxx Part Marking Code (Refer to Electrical Characteristics Table) P = SIDACtor RoHS COMPLIANT xxxxx Date Code MEDIAN VOLTAGE CONSTRUCTION I RATING VARIABLE PP PACKAGE TYPE © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17

SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — DO-214AA Case Pad Outline Inches Millimeters B Temperature 0.079 Dimensions D Measurement (2.0) Min Max Min Max Point A 0.130 0.156 3.30 3.95 C A 0.110 B 0.201 0.220 5.10 5.60 (2.8) C 0.077 0.087 1.95 2.20 0.079 D 0.159 0.181 4.05 4.60 (2.0) inch (millimeter) E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H F H 0.077 0.104 1.95 2.65 E H- P4500SCLHLRP 0.077 0.096 1.95 2.43 K G K 0.006 0.016 0.15 0.41 Packing Options Package Type Description Quantity Added Suffix Industry Standard DO-214AA S 2500 RP EIA-481-D Tape & Reel Pack Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 0.059 DIA Cover tape (8.0) (1.5) 12.99 (330.0) Dimensions are in inches 0.512 (13.0) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.4) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L ittelfuse: P1500SARP P0900SALRP P0720SALRP P0300SALRP P0640SALRP P2300SALRP P2600SALRP P0720SBRP P1800SBLRP P1300SBLRP P1500SBLRP P1100SBLRP P1500SARP_ P3100SARP P3500SARP P1300SARP P1100SARP P2600SARP P2300SARP P0300SARP P0080SCRP P0640SBRP P0640SCLRP P0300SCLRP P0720SCLRP P0900SCLRP P2600SCLRP P1800SBRP P2300SCLRP P0900SBRP P2300SBLRP P2600SBLRP P0640SBLRP P0900SBLRP P0300SBLRP P0720SBLRP P3100SBLRP P3500SBLRP P0080SBLRP P0640SCRP P0080SBRP P0220SBLRP P2100SALRP P2100SBLRP P2100SCLRP P0640SARP P0080SCLRP P1800SALRP P1100SALRP P1500SALRP P1300SALRP P3500SALRP P3100SALRP P1800SARP P0900SARP P0720SCRP P0720SARP P0900SCRP P1800SCRP P3100SCLRP P3500SCLRP P1800SCLRP P1500SCLRP P1100SCLRP P1300SCLRP P0080SARP P0300SCRP P2300SCRP P2600SCRP P3500SCRP P3100SCRP P1300SCRP P1100SCRP P1500SCRP P1500SBRP P1100SBRP P1300SBRP P3100SBRP P3500SBRP P0300SBRP P2300SBRP P2600SBRP P0080SALRP P0220SALRP P0220SCLRP P4500SCLRP P4500SCMCLRP P4500SCLHLRP P4500SBLRP P7002SCLRP P4500SBLHLRP