P16, PA16 www.vishay.com Vishay Sfernice Knob Potentiometer FEATURES • Test according to CECC 41000 or IEC 60393-1 • P16 - version for professional and industrial applications (cermet) 1 W at 40 °C • PA16 - version for professional audio applications (conductive plastic) 0.5 W at 40 °C DESIGN SUPPORT TOOLS click logo to get started • Compact (integrated) • High dielectric strength: 2500 V Models RMS Available • Fully sealed and panel sealed The P16 is a revolutionary concept in panel mounted • Metallic or plastic knob options potentiometers. This unique design consists of a knob • Custom knob on request driving and incorporating a cermet potentiometer. Only the • Material categorization: for definitions of compliance mounting hardware and terminals are situated on the back please see www.vishay.com/doc?99912 side of the panel reducing to a minimum the required  clearance.  QUICK REFERENCE DATA Multiple module No Switch module n/a Detent module n/a A: linear, L: logarithmic, F: reverse Special electrical laws logarithmic Sealing level IP 67 Lifespan 50K cycles DIMENSIONS in millimeters (± 0.5 mm) P16NP P16NM Panel Cutout Thickness nut 2 mm Thickness nut 2 mm washer 1.5 mm washer 1.5 mm Panel sealing ring 10.2 Panel sealing ring 9.6 12 wrench 9.4 12 wrench 8.8 Thread M10 x 0.75 Thread M10 x 0.75 + 0.1 8.1 + 0 7.2 7.2 13.5 ± 1 13.5 ± 1 15.5 ± 1 15.5 ± 1 b 1.8 Reference mark 3 terminals ø 10+ 0.1 0.3 + 0 Panel thickness max.: 3 mm 30 c a 8 Ø 16 Revision: 17-Nov-17 1 Document Number: 51036 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P16, PA16 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS P16 PA16 Resistive element Cermet Conductive plastic Electrical travel 270° ± 10° 270° ± 10° 1.25 P16 LIN. TAPER “”A ” 1.00 W N R I 0.75 E W O P16 Power rating chart ED P 0.50 LOG. TAPER “L & F” NM RAT &LI NP.A T1A6PER NP 0.25 PA16 NM NM LOG. TAPER NP NP 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE IN °C a c Circuit diagram (1) (3) b cw (2) 100 80 F E C N A 60 ST A SI E L Taper L R 40 A T O T % 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION linear taper 22  to 10 M 1 k to 1 M Resistance range logarithmic taper 100  to 2.2 M 470  to 500 k Standard series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7 standard ± 20 % ± 20 % Tolerance on request ± 10 % ± 10 % (1 k to 100 k) linear 1 W at +40 °C 0.5 W at +40 °C Power rating logarithmic 0.5 W at +40 °C 0.25 W at +40 °C Temperature coefficient (typical) ± 150 ppm/°C ± 500 ppm/°C Dielectric strength (RMS) 2500 V 2500 V Limiting element voltage (linear law) 350 V 350 V Contact resistance variation 3 % Rn or 3  2 % Rn or 3  End resistance (typical) 1  1  Insulation resistance (500 VDC) 106 M 106 M Revision: 17-Nov-17 2 Document Number: 51036 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P16, PA16 www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical travel 300° ± 5° Operating torque 2 Ncm typical End stop torque 25 Ncm maximum Max. tightening torque of mounting nut 180 Ncm maximum Unit Weight 4.5 g typical ENVIRONMENTAL SPECIFICATIONS METALLIC KNOB PLASTIC KNOB Temperature range -40 °C to +125 °C -40 °C to +85 °C Climatic category 40/100/56 40/85/56 Sealing Sealed container and panel sealed Protection grades IP67 MARKING CONTROL KNOB • Ohmic value code, tolerance code and taper Black metallic knob (NM). • Manufacturing date code Black plastic knob (NP). For white and blue color see ordering information. Other dimensions, shapes, colors of control knobs are PACKAGING manufactured on request - please consult Vishay. Other reference marks (shapes, colors) and legends can be • Carton box of 20 pieces printed on plastic knob on request - please consult Vishay. P16 STANDARD RESISTANCE ELEMENT DATA PA16 STANDARD RESISTANCE ELEMENT DATA STAN- LINEAR TAPER LOG TAPER STAN- LINEAR TAPER LOG TAPER DARD MAX. MAX. MAX. MAX. DARD MAX. MAX. MAX. MAX. RESIS- POWER MAX. CUR. POWER MAX. CUR. RESIS- POWER MAX. CUR. POWER MAX. CUR. TANCE AT VOLTAGETHROUGH AT VOLTAGETHROUGH TANCE AT VOLTAGE THROUGH AT VOLTAGE THROUGH VALUES 40 °C WIPER 40 °C WIPER VALUES 40 °C WIPER 40 °C WIPER  W V mA W V mA  W V mA W V mA 22 1 4.69 213 470 0.25 10.8 23.1 47 1 6.85 146 1K 0.5 22.4 22.4 0.25 15.8 16 100 1 10 100 2.2K 0.5 33.2 15.1 7.1 71 0.25 23.5 11 220 1 14.8 67.4 0.5 4.7K 0.5 48.5 10.3 10.5 48 0.25 34.3 7 470 1 21.7 46.1 0.5 10K 0.5 70.7 7.07 15.3 32.6 0.25 50.0 5.0 1K 1 31.6 31.6 0.5 22K 0.5 105 4.77 22.4 22.4 0.25 74 3.4 2.2K 1 46.9 21.3 0.5 47K 0.5 153 3.26 33.2 15.1 0.25 108 2.3 4.7K 1 68.5 14.6 0.5 100K 0.5 224 2.24 48.5 10.3 0.25 158 1.6 10K 1 100 10 0.5 220K 0.5 332 1.51 70.7 7.07 0.25 235 1.1 22K 1 148 6.74 0.5 470K 0.26 350 0.74 105 4.77 0.25 343 0.7 47K 1 217 4.61 0.5 1M 0.12 350 0.35 153 3.26 100K 1 316 3.16 0.5 224 2.24 220K 0.56 350 1.59 0.5 332 1.51 470K 0.26 350 0.75 0.5 350 0.74 1M 0.12 350 0.35 0.26 350 0.35 2.2M 0.05 350 0.16 0.12 350 0.16 4.7M 0.02 350 0.07 0.056 10M 0.01 350 0.012 Revision: 17-Nov-17 3 Document Number: 51036 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P16, PA16 www.vishay.com Vishay Sfernice PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) OTHER 1000 h at rated power Insulation resistance: > 104 M Electrical endurance ± 5 % - 90'/30' cycle at +40 °C Contact res. variation: < 2 % Rn 56 days Insulation resistance: > 104 M Damp heat, steady state ± 2 % ± 1 % 40 °C, 93 % HR Mechanical endurance 50 000 cycles ± 5 % - Contact res. variation: < 2 % Rn 50 g’s at 11 ms Shock 3 successive shocks ± 0.2 % ± 0.5 % - in 3 directions 10 Hz to 55 Hz Vibration 0.75 mm or 10 g’s ± 0.2 % - V1-2/V1-3  ± 0.5 % during 6 h Note • Nothing stated herein shall be construed as a guarantee of quality or durability ORDERING INFORMATION P 1 6 N P 2 2 3 M A B 1 5 PACKAGING SPECIAL MODEL STYLE OHMIC VALUE TOLERANCE TAPER CODE NUMBER P16 = NM: metallic black 223 = 22 k M = ± 20 % A: linear B15 = (If applicable) cermet NP: plastic black for ohmic value L: clockwise logarithmic box of Given by WM: metallic white range see On request: F: inverse clockwise 20 pieces Vishay PA16 = WP: plastic white electrical K = ± 10 % logarithmic for custom conductive BP: plastic blue specification design plastic PART NUMBER DESCRIPTION (for information only) P16 NP 22 k 20 % A BO e3 LEAD MODEL STYLE VALUE TOLERANCE TAPER SPECIAL PACKAGING SPECIAL (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 17-Nov-17 4 Document Number: 51036 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000