SMT POWER INDUCTORS Shielded Drum Core - P1172NL/P1173NL Series Height: 8.0mm Max Footprint: 12.2mm x 12.2mm Max Current Rating: up to 14A Inductance Range: .8µH to 51µH Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C Part2,3 Inductance Inductance Irated 5 DCR (mΩΩ) Saturation 6 Heating 7 Core Loss 8 SRF Numbers @(0μAHD)C (@μHIr)a MteIdN (ADC) TYP MAX -C2u5r%re (nAt) +C4u0r°rCe(nAt) F(aKc2t)or (MHz) P1172.132NL P1173.132NL 1.3* 0.8 14 2.3 3 15 14 90 >40 P1172.202NL P1173.202NL 2.0* 1.3 10 4.5 6 13 10 110 >40 P1172.272NL P1173.272NL 2.7* 1.8 9 5.8 7.3 11 9 130 >40 P1172.372NL P1173.372NL 3.7* 2.4 8.3 6.8 8.5 9.2 8.3 150 37 P1172.472NL P1173.472NL 4.7* 3.1 7.9 7.6 9.5 8.2 7.9 170 33 P1172.602NL P1173.602NL 6.0* 3.9 6 13 16.5 6.9 6 200 30 P1172.762NL P1173.762NL 7.6* 4.9 5.7 14.3 18.5 6.2 5.7 220 25 P1172.103NL P1173.103NL 10 7.5 5.2 17.3 21.8 5.5 5.2 250 20 P1172.123NL P1173.123NL 12 9 4.5 23.3 29 5.1 4.5 280 18 P1172.153NL P1173.153NL 15 11.3 4.1 28.3 35.4 4.4 4.1 300 15 P1172.183NL P1173.183NL 18 13.5 4 29.4 37 4.3 4 340 13 P1172.223NL P1173.223NL 22 16.5 3.8 33.2 42 3.8 3.8 370 12 P1172.273NL P1173.273NL 27 20.3 3.4 36.2 45.9 3.4 3.6 410 11 P1172.333NL P1173.333NL 33 24.8 3 49.3 64.8 3 3.1 460 10 P1172.393NL P1173.393NL 39 29.3 2.7 65.2 81.5 2.8 2.7 490 8 P1172.473NL P1173.473NL 47 35.3 2.6 71.4 89 2.6 2.6 550 7 P1172.683NL P1173.683NL 68 51 2.1 108 135 2.1 2.1 670 6 *Inductance at 0ADCtolerance on indicated part numbers is ±30%; tolerance is ±20% on all other parts. NOTES FROM TABLE:(See page 43) Mechanical (cid:8)(cid:18)(cid:18)(cid:24)(cid:28)8(cid:8)(cid:18)(cid:18)(cid:24)(cid:27) (cid:8)(cid:18)(cid:18)(cid:24)(cid:28) (cid:8)(cid:18)(cid:18)(cid:24)(cid:27) (cid:2)(cid:13)(cid:5)(cid:4) (cid:2)(cid:13)(cid:5)(cid:4) (cid:9)(cid:6)(cid:2)(cid:2) (cid:9)(cid:6)(cid:2)(cid:2) (cid:2)(cid:13)(cid:5)(cid:4) (cid:2)(cid:13)(cid:5)(cid:4) (cid:2)(cid:2)(cid:16)(cid:14) (cid:2)(cid:2)(cid:13)(cid:14) (cid:9)(cid:6)(cid:2)(cid:2) (cid:2)(cid:2)(cid:13)(cid:14) (cid:9)(cid:6)(cid:2)(cid:2) (cid:8)(cid:6)(cid:2)(cid:2) (cid:5)(cid:6)(cid:2)(cid:2) (cid:5)(cid:6)(cid:2)(cid:2) (cid:11)(cid:11)(cid:5)(cid:10)(cid:2)(cid:8)(cid:7)(cid:11)(cid:6)(cid:9)(cid:8)(cid:8)(cid:12)(cid:7) (cid:8) (cid:12)(cid:12)(cid:12) (cid:5) (cid:5) (cid:8) (cid:2)(cid:4)(cid:5)(cid:6)(cid:14)(cid:2)(cid:16)(cid:2) (cid:5) (cid:8) (cid:2)(cid:13)(cid:5)(cid:6)(cid:5)(cid:2)(cid:9)(cid:2) (cid:11)(cid:2)(cid:7)(cid:16)(cid:8) (cid:11)(cid:2)(cid:7)(cid:16)(cid:8) (cid:5)(cid:8)(cid:6)(cid:2)(cid:2) (cid:5)(cid:8)(cid:6)(cid:2)(cid:2) (cid:11)(cid:2)(cid:7)(cid:9)(cid:8) (cid:2)(cid:13)(cid:5)(cid:4) (cid:2)(cid:2)(cid:16)(cid:4) (cid:2)(cid:2)(cid:16)(cid:4) (cid:5)(cid:8)(cid:6)(cid:8)(cid:7) (cid:9)(cid:6)(cid:2)(cid:2) (cid:5)(cid:6)(cid:14)(cid:5) (cid:2)(cid:13)(cid:3)(cid:3) (cid:2)(cid:3)(cid:4)(cid:4)(cid:5)(cid:2)(cid:6)(cid:5)(cid:7)(cid:8)(cid:8)(cid:9)(cid:7)(cid:8)(cid:10)(cid:9)(cid:11)&(cid:3)(cid:6) (cid:2)(cid:5)(cid:13)(cid:7) (cid:5)(cid:6)(cid:14)(cid:5) (cid:2)(cid:3)(cid:4)(cid:4)(cid:5)(cid:2)(cid:6)(cid:5)(cid:7)(cid:8)(cid:8)(cid:9)(cid:7)(cid:8)(cid:10)(cid:9)(cid:11)&(cid:3)(cid:6) (cid:11)(cid:10)(cid:11)(cid:12) (cid:11)(cid:10)(cid:11)(cid:12) (cid:14)(cid:6)(cid:13)(cid:2) (cid:13)(cid:6)(cid:7)(cid:2) Schematic: (cid:10)(cid:5)(cid:9)(cid:4) (cid:11)(cid:10)(cid:9)(cid:5)(cid:2) (cid:17),(cid:4)(cid:2) (cid:3)(cid:9),(cid:2)(cid:2) (cid:5) Weight . . . . . . . . 4.5 grams (cid:11)(cid:10)(cid:17)(cid:6)(cid:7) Tape & Reel. . . . . . 400/reel (cid:11)(cid:10)(cid:6)(cid:17)(cid:4) (cid:4)(cid:6),(cid:2)(cid:2) (cid:3)(cid:4),(cid:7)(cid:2) Dimensions: Inches mm (cid:8) Unless otherwise specified, all tolerances are ±.010 0,25 (cid:18)(cid:10)(cid:24)!(cid:8)"(cid:8)#!!$(cid:8)$(cid:10)%&’(cid:18) USA 858 674 8100 •• Germany 49 7032 7806 0 •• Singapore 65 6287 8998 ••Shanghai 86 21 54643211 / 2 •• China 86 755 33966678 ••Taiwan 886 3 4641811 www.pulseeng.com 39 SPM2007 (11/07)

SMT POWER INDUCTORS Shielded Drum Core Series Notes from Tables (pages 27 - 42) 1. Unless otherwise specified, all testing is made at 8. In high volt*time (Et) or ripple current applications, addi- 100kHz, 0.1VAC. tional heating in the component can occur due to core 2. Optional Tape & Reel packaging can be ordered by losses in the inductor which may necessitate derating adding a "T" suffix to the part number (i.e. P1166.102NL the current in order to limit the temperature rise of the becomes P1166.102NLT). Pulse complies with industry component. In order to determine the approximate total standard Tape and Tape & Reel specification EIA481. loss (or temperature rise) for a given application, both copper losses and core losses should be taken into 3. The "NL" suffix indicates an RoHS-compliant part account. number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not Estimated Temperature Rise: have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. Trise = [Total loss (mW) / K0].833(oC ) 4. Temperature of the component (ambient plus temperature rise) must be within specified operating Total loss = Copper loss + Core loss (mW) temperature range. 5. The rated current (Irated) as listed is either the satura- Copper loss = IRMS2x DCR (Typical) (mW) tion current or the heating current depending on which value is lower. 6. The saturation current, Isat, is the current at which Irms= [IDC2+ ΔI2/12]1/2(A) the component inductance drops by the indicated percentage (typical) at an ambient temperature of Core loss = K1 x f (kHz)1.23x Bac(Ga)2.38(mW) 25°C. This current is determined by placing the component in the specified ambient environment and Bac (peak to peak flux density) = K2 x ΔI (Ga) applying a short duration pulse current (to eliminate self-heating effects) to the component. [= K2/L(µH) x Et(V-µSec) (Ga)] where f varies between 25kHz and 1MHz, and Bac is 7. The heating current, Idc, is the DC current required less than 2500 Gauss. to raise the component temperature by the indicated delta (approximately). The heating current is K2 is a core size and winding dependant value and determined by mounting the component on a is given for each p/n in the proceeding datasheets. typical PCB and applying current for 30 minutes. The K0 & K1 are platform and material dependant constants temperature is measured by placing the thermocouple and are given in the table below for each platform. on top of the unit under test. Trise Factor Core Loss Factor (cid:24)(cid:12)(cid:13)(cid:17)1(cid:12)(cid:14)(cid:14)47.(cid:5)6(cid:14)(cid:5)(cid:23)(cid:20)(cid:9)8(cid:5)(cid:25)(cid:17)(cid:7)(cid:14)(cid:16)(cid:11)9 Part No. (K0 ) (K1) & (cid:12)(cid:3)(cid:6)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) PG0085/86 2.3 5.29E-10 (cid:15) (cid:5)(cid:6)(cid:6)(cid:25)!) PG0087 5.8 15.2E-10 (cid:26) (cid:7)(cid:3)(cid:4)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) PPG11070440/41 00..88 26..8407EE--1100 7.(cid:5)% (cid:7)(cid:3)(cid:6)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) (cid:7)(cid:12)(cid:6)(cid:6)(cid:6)(cid:6)(cid:25)(cid:25)!!)) PPFF00640614 43..66 1244..07EE--1100 (cid:14)(cid:14)(cid:5)4(cid:5) (cid:5)(cid:3)(cid:4)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) (cid:2)(cid:6)(cid:6)(cid:25)!) PF0465 3.6 33.4E-10 (cid:12) (cid:5)(cid:3)(cid:6)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) (cid:4)(cid:6)(cid:6)(cid:25)!) 1 P1166 1.9 29.6E-10 (cid:17)(cid:5) (cid:13)(cid:6)(cid:6)(cid:25)!) P1167 2.1 42.2E-10 (cid:13) (cid:6)(cid:3)(cid:4)(cid:6)(cid:16)(cid:17)(cid:5)(cid:6) (cid:12) PF0560NL 5.5 136E-10 (cid:24) (cid:5)(cid:3)(cid:6)*!) (cid:6) P1168/69 4.8 184E-10 (cid:6) (cid:4)(cid:6)(cid:6) (cid:5)(cid:6)(cid:6)(cid:6) (cid:5)(cid:4)(cid:6)(cid:6) (cid:7)(cid:6)(cid:6)(cid:6) (cid:7)(cid:4)(cid:6)(cid:6) P1170/71 4.3 201E-10 (cid:2)(cid:22)(cid:5)%)(cid:21)(cid:9)(cid:14)(cid:14)& P1172/73 5.6 411E-10 (cid:18)(cid:19)(cid:20)(cid:21)(cid:20)(cid:22)(cid:2)(cid:23)(cid:22)(cid:24)(cid:22)(cid:25)(cid:7)(cid:22)(cid:26)(cid:22)(cid:2)(cid:27)(cid:22)(cid:28)(cid:24)(cid:22)(cid:25)(cid:7)(cid:29)(cid:30)(cid:31) !"(cid:22)(cid:26)(cid:22)(cid:16)#(cid:31)$% &(cid:20)’"( PF0552NL 8.3 201E-10 PF0553NL 7.1 411E-10 Take note that the component's temperature rise varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. USA 858 674 8100 •• Germany 49 7032 7806 0 •• Singapore 65 6287 8998 ••Shanghai 86 21 54643211 / 2 •• China 86 755 33966678 ••Taiwan 886 3 4641811 www.pulseeng.com 43 SPM2007 (11/07)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P ulse: P1172.103T P1172.123T P1172.132T P1172.153T P1172.202T P1172.223T P1172.272T P1172.333T P1172.372T P1172.472T P1172.683T P1172.762T P1173.103T P1173.123T P1173.132T P1173.153T P1173.183T P1173.223T P1173.272T P1173.393T P1173.472T P1173.473T P1173.602T P1173.103NLT P1172.103NLT P1173.183NLT P1172.123NLT P1172.132NLT P1172.153NLT P1172.202NLT P1172.223NLT P1172.272NLT P1172.273NLT P1172.333NLT P1172.393NLT P1172.472NLT P1172.473NLT P1172.602NLT P1172.683NLT P1173.123NLT P1173.132NLT P1173.272NLT P1173.333NLT P1173.372NLT P1173.473NLT P1173.602NLT P1173.683NLT P1172.372NLT P1172.223NL P1173.472NLT P1173.223NLT P1173.372T