None

VICOR CORPORATION Power Solutions Vicor's product line of modular power components and complete power systems includes thousands of combinations of input voltage, output voltage, and power levels, complete with accessory components that integrate other power system functions. Together, these products allow designers around the world to meet their unique power requirements by selecting and interconnecting standard modular parts. The benefits for you are rapid, flexible design of complete power systems at any power level. If you don't find the converter you need from our thousands of predefined DC-DC converters, you can design your own custom product on the web using Vicor's PowerBench Design System. We offer a wide range of solutions with 1 – 20 outputs and autoranging, PFC, or three-phase inputs. There are several chassis sizes to choose from, both with and without integral cooling fans. Also available from Vicor is a strong offering of front ends and filters to complete your design. Our extensive MIL-COTS product line incorporates the technology and features of our commercial products into a cost-effective alternative for military, aerospace, and other high- reliability, harsh-environment applications. Standard inputs of 28, 48, 155, 270, and 375 Vdc are available. Vicor is pioneering the second wave of the power component revolution with the introduction of flexible, high-performance power components. V(cid:129)I Chip™Factorized Power Architecture provides the means to more efficient power distribution and the V(cid:129)I Chips provide the building blocks with the right attributes of high density and efficiency, flexibility, and fast transient response that enable power architects to moreeasily design small, high-performance, cost-effective power system solutions. V(cid:129)I ChipPRMs™(regulators), VTMs™(voltage transformers) and BCMs™(bus converters) are available for a wide range of DC-DC conversion and Intermediate Bus Architecture applications. MIL-COTS versions are also available. New power options are available with Picor’s first standard semiconductor solution – Cool–ORing™– that can substantially reduce power dissipation and size, while providing superior dynamic response for Active ORing applications in redundant power architectures. Another new option is the new modular power platform: VI BRICK. The new VI BRICK family is an advanced modular power platform that incorporates the superior technical attributes of V(cid:129)I Chip technology and a robust packaging that facilitates thermal management and through-hole assembly. Models include high-current density / low-voltage DC-DC converters, a wide range of highly efficient bus converters (BCM), and individual modules – PRM and VTM – for both regulation and transformation. Vicor Custom Power provides complete power solutions for communications, industrial, datacom, test equipment, medical diagnostics, and MIL-COTS. Using the extensive Vicor line of DC-DC converters in a modular, building-block design approach,Custom Power offers total solutions to unique power requirements in the shortest possibletime. All our products deliver agency-approved reliability and the predictable performance of field-proven power technology, including conformance to RoHS if desired. Vicor is ISO 9001:2000 certified and places heavy emphasis on the "Plan-Do-Check-Act" model (PDCA) to foster continuous improvement. This enables proactive actions to be undertaken to improve our technology, our products, our processes, and our service to our customers. Our new Quality Center on vicorpower.comenables quality managers,purchasing agents, and designers to see comprehensive video of our facilities as well as generate customized ISO 9001:2000 reports about our quality systems. Be assured that Vicor is on a continuous quest for the best technical solution for you.Moreover, our commitment to the elegance and affordability of your design is backedup by our global staff of experienced applications engineers. Rely on Vicor as your dedicated design partner.

TABLE OF CONTENTS Product Overview Chart............................................2 – 3 DC-DC V(cid:129)I Chip™Advantage..........................................4 WWHHAATT’’SS NNEEWW Power Conversions Using PRM, VTM & BCMs................ 4 Bus Converter (BCM™)...................................................5 Regulator (PRM™)..........................................................6 Voltage Transformer (VTM™)..........................................7 Vicor develops new products all the time, so, to keep everyone up-to-date, VI BRICKs.........................................................................8 we’ve created a special area on vicorpower.com where you can always see PRM, VTM, BCM & DC-DC Converter.................... 8 – 11 “what’s new.” Just go to vicorpower.com and click on “What’s New.” It will DC-DC BRICKs.................................................................12 take you to our new products page. From there you’ll be able to link to VI-200 & VI-J00 Series Converter Modules..............12 –13 detailed design information. Maxi, Mini & Micro Series Converter Modules......14 –15 Power Path Management Solutions.............................16 Cool-ORing™ Series...............................................16 –17 Web ExpressCode AC-DC Front Ends.........................................................18 Harmonic Attenuator Module (HAM)..........................18 Web ExpressCode provides quick access to AC-DC / DC-DC PFC FrontEnd......................................19 detailed product information Alternating Input Module (AIM)..................................20 Autoranging Rectifier Module (ARM)...........................21 Each product description in the Vicor catalog includes a unique Web Filter/Autoranging Rectifier Module (FARM)...............21 ExpressCode. Each code provides direct access to the corresponding, Modular AC Front-end System (ENMods)....................22 information rich product pages on vicorpower.com. Just enter the Web Brick...............................................................................23 ExpressCode into the Web ExpressCode search box on vicorpower.com’s BatMod Battery Charger...............................................23 homepage. You’ll be sent to the exact page you want with access to all Packaging Options.......................................................23 related information such as product description, operating specifications, Filters.............................................................................24 access to data sheets, outline drawings, and product configuration tools. Filter Input Attenuator Module (FIAM).........................24 Input Attenuator Module (IAM)...................................24 Ripple Attenuator Module (RAM).................................25 Output Ripple Attenuator Module (MicroRAM)...........25 Active EMI Filters (QPI Family)......................................26 Output Ripple Attenuators (QPO Family).....................27 AC-DC / DC-DC Configurable Power Solutions...........28 AC-DC FlatPAC Family.................................................28 AC-DC PFC FlatPAC......................................................29 AC-DC VIPAC Power System........................................30 DC-DC VIPAC Arrays.....................................................31 DC-DC ComPAC Family...............................................32 DC-DC MegaMod Family..............................................33 MIL-COTS Products.................................................34 –37 Westcor Configurable Power Solutions......................38 PowerBench™ You Design It ,We Build It AC-DC / DC-DC LoPAC Family...................................... 38 AC-DC / DC-DC FlatPAC-EN..........................................39 AC-DC / DC-DC MegaPAC Family..................................40 PowerBench is the most advanced suite of online power tools avaliable. DC-DC (only) ConverterPACs ......................................41 They can help you design, select and configure products whether you are just Custom Power Solutions......................................42 –43 beginning or experienced in designing power, PowerBench can take you from beginning to end of any power project. All of this in real time. Custom Configurable Power Solutions................44 - 45 DC-DC MegaPAC........................................................44 See for yourself what Vicor can do for you VME450 DC-DC Power Supply......................................44 on Page 55or go to the Vicor website, Badger AC-DC Power Supply.......................................45 click PowerBench and start building. Javelin AC-DC Power Supply.......................................45 PowerBank AC-DC Power Supply................................45 Evaluation Boards.................................................46 –47 Accessories............................................................48 – 52 PO ERBENCH Quality / RoHS Compliance .........................................53 Vicorpower.com Technical...........................................54 PowerBench Tools........................................................55 Applications Support.....................................................56 Customer Support.........................................................57 U.S. & CANADA: 800-735-6200 VICORPOWER.COM 1 Consult back cover for a complete list of contacts.

OVERVIEW V(cid:129)I Chip & VI BRICK Solutions DC-DC Products Bus Converter 330 – 365 Vin BCM 10.3 – 11.4 Vdc, Up to 300 W; 41.25 – 45.6 Vdc, Up to 300 W Bus Converter 360 – 400 Vin BCM 11.2 – 12.5 Vdc, Up to 300 W; 45 – 50 Vdc, Up to 330 W Bus Converter 38 – 55 Vin BCM 1.2 – 55 V, Up to 300 W Regulator 38 – 55 Vin PRM Up to 320 W Regulator 36 – 75 Vin PRM Voltage Transformer 0.8 – 55 V Up to 240 W VTM Up to 100 A or 300 W Regulator 18 – 36 Vin PRM Up to 120 W MIL-COTS MIL-COTS Regulator M-VTM MIL-COTS Voltage Transformer 1 – 50 V 16 – 50 Vin MQPI M-PRM Up to 100 A or 120 W Up to 120 W Active ORing: (12 V bus or lower) ADcistcivreet Oe RCionngt:r o(4ll8e rV bus or lower) EMI Filter DSoislcurteioten sController & Full-Function 24 Vdc, 48 Vdc QPI Hot-Swap Controller Component Power Solutions: VI-200 & VI-J00 Series AC-DC Products DC-DC Products Harmonic Attenuator Module Universal Unity Power Factor DC-DC Converter 85 – 264 Vac Up to 675 W per module VI-200 / MI-200 25 – 200 W per module 1 – 95 Vdc More Power? Add a Booster. Output Ripple Attenuation Module Universal Rectifier / EMI Filter combines active and passive filtering. 85 – 264 Vac Up to 250 W RAM Autoranging Filter / Autoranging Rectifier Module VI-200 / MI-200 90 – 132 Vac 180 – 264 Vac Up to 1,000 W QPO provides active filtering QPO Another Output? Add a Driver. to achieve differential noise Autoranging Autoranging Rectifier Module attenuation. 90 – 132 Vac 180 – 264 Vac Up to 1,500 W Programmable Current Source DC-DC Products 10 – 400 Vdc 2340,0 2 V8d, c48, 270, MIAI-MIA M/ EUMp It Foil t4e0r 0/ TWransient Protection VI-J00 / DC-DC Converter MI-J00 10 – 100 W per module Active ORing: (48 V bus or lower) Active ORing: (12 V bus or lower) Discrete Controller Active EMI Filter Discrete Controller & Full-Function 24, 28, 48 Vdc QPI Up to 576 W @ 48 V Solutions Component Power Solutions: Maxi, Mini, Micro & VI BRICK Series AC-DC Products DC-DC Products Harmonic Attenuator Module Universal HAM Unity Power Factor DC-DC Converter 85 – 264 Vac High-Boost Up to 675 W Shiingghl ep owwireer ,p faarualltl etloinlegr afonrt arrays. per module Autoranging 90 – 132 Vac Filter / Autoranging Rectifier Module Up to 600 W per module 180 – 264 Vac Up to 1,000 W 1 – 54 Vdc Output Ripple Attenuation DC-DC Converter Autoranging Autoranging Rectifier Module Module combines active and 90 – 132 Vac passive filtering. 180 – 264 Vac Up to 1,500 W Front-end System A1In1up5tu o–tr a2n30g iVnagc FARM3 MINIHAM fUopr tEoN 5 C5o0m Wpliance U1 p– t4o8 3V0d0c W per module QPO QtaotPt aOecn hpuiraeotvvieoid nde.isff aecrteinveti afill tneoriisneg DC-DC Converter DC-DC Products Nominal Input 10 – 425 Vdc Transient Protection, Up to 150 W per module Inrush Current Limiting EMI Filter 1 – 48 Vdc 28, 48, 270 Vdc Up to 25 A 48 Vin VI BRICK Active ORing: (48 V bus or lower) Discrete Controller Active EMI Filter Up to 220 W per module Active ORing: (12 V bus or lower) 24, 28, 48 Vdc QPI 1 – 48 Vdc Discrete Controller & Full-Function Up to 576 W @ 48 V Solutions 2 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

OVERVIEW Configurable Power Solutions VIPAC Power Systems MAXI 1 – 3 Outputs using 9108 0– –1 3226 4V Vacac MSearixei,s MMiondi u&l eMsicro MINI U90p0 t Wo MICRO LoPAC Family VI-200 VI-J00 1 – 6 Outputs using 85 – 264 Vac VI-200, VI-J00 Series or Up to 100 – 380 Vdc Maxi, Mini & Micro MAXI 1,500 W Series Modules MINI MICRO FlatPAC Family Up to 600 W 1 – 3 Outputs using VI-200 90 – 132 Vac VI-200 / Maxi Up to 575 W 180 – 264 Vac Series Modules 85 – 264 Vac (PFC) MAXI PFC FrontEnd VI-200 VI-J00 1 – 4 Outputs using VI-200, VI-J00 Series or Maxi, Mini & Micro MAXI MINI MICRO Series Modules Up to 85 – 264 Vac 2,200 W 100 – 380 Vdc Can also be used BCM with VIPAC Array, V(cid:129)I Chip BCM, and more VIPAC ARRAY FlatPAC-EN VI-200 VI-J00 Up to 90 – 132 Vac 1 – 4 Outputs using 500 W 180 – 264 Vac VI-200, VI-J00 Series or MAXI (425 W for 250 – 380 Vdc Maxi, Mini & Micro EN compliance) Series Modules MINI MICRO MegaPAC Family VI-200 85 – 264 Vac 1 – 20 Outputs using Up to 3ø 208/240 Vac VI-200, VI-J00 & Maxi VI-J00 4,000 W 100 – 380 Vdc Series Modules MAXI VIPAC Arrays Parallel for MAXI High Power DC Inputs 1 – 4 Outputs using Up to 24, 28, 48, 72, 110, Maxi, Mini & Micro MINI 750 W 150, 300, 375 Vdc Series Modules MICRO MegaMod Family (Chassis Mount) Up to 300 W 1 – 3 Outputs using VMII--JJ0000/ DC Inputs VI-200 / MI-200 or 10 – 400 Vdc VI-J00 / MI-J00 Up to 600 W Series Modules VI-200 / MI-200 ComPAC Family 1 – 3 Outputs using Up to 600 W DC Inputs VI-200 / MI-200 VMI-I2-20000 / Series Modules 24, 28, 48, 270, 300 Vdc Front-end filtering optimized for communication and defense applications U.S. & CANADA: 800-735-6200 VICORPOWER.COM 3 Consult back cover for a complete list of contacts.

V(cid:129)I CHIP SOLUTIONS 48 V BCM™ Bus Converter 48 V PRM™ Regulator VTM™ Voltage Transformer page 5 page 6 page 7 MIL-COTS Version Available Page 34 (cid:2) ZVS / ZCS isolated Sine (cid:2) 48 Vin ZVS buck / boost regulator (cid:2) 48 Vin Sine Amplitude Converter Amplitude Converter (cid:2) Input: 36 – 75 Vdc or 38 – 55 Vdc (cid:2) 26 – 55 Vdc input range (cid:2) Input: 38 – 55 Vdc (cid:2) Provides 26 – 55 Vdc output (cid:2) 0.8 – 55 Vdc outputs (cid:2) Output: Eleven models, 1.5 to 48 V factorized bus for 48 Vin VTMs (cid:2) Efficiency: Up to 97% (cid:2) Power: Up to 300 W (450 W for 1 ms) (cid:2) Efficiency: Up to 97% (cid:2) High density: Up to 345 A/in3 (cid:2) Efficiency: Up to 96.5% (cid:2) High density: Up to 1,105 W/in3 (cid:2) Up to 100 A or 300 W (55 W/cm3) (cid:2) High density: Up to 1,036 W/in3 (cid:2) Small footprint: Up to 90 A/in2 (68 W/cm3) (cid:2) Small footprint: 1.1 in2(7.1 cm2) (cid:2) 125ºC operation (Tj) (cid:2) Small footprint: 1.1 in2(7.1 cm2) (cid:2) 125ºC operation (Tj) (cid:2) Low weight: 0.5 oz (15 g) (cid:2) 125°C operation (Tj) (cid:2) Low weight: 0.5 oz (15 g) (cid:2) Isolation to 2,250 Vdc (cid:2) Low weight: 0.5 oz (15 g) (cid:2) J-Lead package pick & place / SMD compatible (cid:2) <1 µs transient response (cid:2) >3.5 million hours MTBF (cid:2) Through-hole pin option (cid:2) Low noise: No output filtering required (cid:2) Low noise: No output filtering required (cid:2) J-Lead package pick & place / (cid:2) J-Lead package pick & place / SMD compatible SMD compatible (cid:2) Through-hole pin option (cid:2) Through-hole pin option, full size High Voltage BCMBus Converter 24 V PRM Regulator QPI for V(cid:129)I Chips Input Filter Module page 5 page 6 page 26 MIL-COTS Version Available Page 34 (cid:2) ZVS / ZCS isolated Sine (cid:2) 24 Vin ZVS buck / boost regulator (cid:2) Support EN55022, Class B limits Amplitude Converter (cid:2) Input: 18 – 36 Vdc (cid:2) Compatible with 48 and 24V V(cid:129)I Chips (cid:2) 330 – 365 Vdc to 11 Vdc @ 300 W (cid:2) Provides 26 – 55 Vdc output (cid:2) Efficiency: >99% (cid:2) 360 – 400 Vdc to 12 Vdc @ 300 W factorized bus for 48 Vin VTMs (cid:2) Up to 65 dB CM attenuation at 1 MHz (cid:2) Efficiency: Up to 97% (cid:2) Efficiency: Up to 95% (cid:2) Up to 80 dB DM attenuation at 1 MHz (cid:2) High density: Up to 1,034 W/in3 (cid:2) High density: Up to 414 W/in3 (cid:2) 7 A models, parallelable for up to 14 A (25 W/cm3) (cid:2) Small footprint: 1.1 in2(7.1 cm2) (cid:2) Hot-Swap models available (cid:2) Small footprint: 1.1 in2(7.1 cm2) (cid:2) 125°C operation (Tj) (cid:2) Supports AdvancedTCA®PICMG3.0 (cid:2) 125ºC operation (Tj) (cid:2) Isolation to 4,242 Vdc requirements (cid:2) Low weight: 0.5 oz (15 g) (cid:2) >2.6 million hours MTBF (cid:2) 12,5 x 25 x 4,5 mm LGA package (cid:2) J-Lead package pick & place / (cid:2) Low noise: No output filtering required (cid:2) 25 x 25 x 4,5 mm package for SMD compatible Hot-Swap models (cid:2) Low weight: 0.5 oz (15 g) (cid:2) Through-hole pin option (cid:2) J-Lead package pick & place / SMD compatible VI BRICK Evaluation Boards Available (cid:2) Through-hole pin option Thermally enhancedpackaging option Page 46 available for PRM, VTM, BCM, Page 8 – 10

BRICK SOLUTIONS VI-200 / VI-J00 DC-DC Converter Maxi / Mini / Micro DC-DC Converter VI BRICK PRM / VTM / BCM MIL-COTS Version Available page 12-13 Page 35 page 14-15 page 8-10 MIL-COTS MIL-COTS Version Version Available Available Page 35 Page 34 (cid:2) Input voltage ranges: 10 – 400 Vdc (cid:2) Input voltages: 24, 28, 48, 72, 110, 150, (cid:2) Brick solution for Factorized Power 300, 375 Vdc (cid:2) Output voltages: 1 – 95 Vdc (cid:2) Thermally enhanced package – (cid:2) Output power: 50 –600 W baseplate and through-hole pin (cid:2) Output power (per module): VI-200: 50 – 200 W (cid:129)VI-J00: 25 – 100 W (cid:2) 100°C, no derating (cid:2) 100˚C baseplate operation (cid:2) Parallelable for higher power (cid:2) High efficiency (cid:2) Small footprint: 2.08 in2 (cid:2) 100°C operation: 85°C for VI-200 (cid:2) Low-noise ZCS / ZVS (cid:2) Low profile: 0.37 inches above board (cid:2) Efficiency: Up to 90% (cid:2) High power density: Up to 120 W/in3 (cid:2) Efficiency: Up to 97% (cid:2) Agency approvals: CE Marked (cid:2) High power density: Up to 390 W/in3 cULus, cTÜVus VI BRICK DC-DC Converter QPI Family Active EMI Input Filters QPO Family Active Output Ripple Attenuators page 26 page 27 page 11 QuietPower™ QuietPower™ (cid:2) Up to 60 dB CM attenuation at 250 kHz (cid:2) >30 dB PARD attenuation, 1 kHz to 500 kHz (cid:2) Up to 80 dB DM attenuation at 250 kHz (cid:2) 3 – 30 Vdc and 0.3 – 5.5 Vdc input models (cid:2) Input range: 36 –75 Vdc (cid:2) Up to 14 A (cid:2) Up to 20 A (cid:2) Efficiency: Up to 93% (cid:2) Efficiency: >99% at full load (cid:2) Supports precise point-of-load regulation (cid:2) Output voltages: 1 –48 V (cid:2) High density, low profile LGA package (cid:2) Reduces required number of output (cid:2) Fast dynamic response capacitors to support dynamic loads (cid:2) Designed to support EN Class B (cid:2) Low noise (cid:2) Selectable optimization of attenuation, (cid:2) Integrated Hot-Swap in select models (cid:2) Maximum case temperature: power dissipation, transient load response 100˚C, no derating (cid:2) Current rating supports ATCA®blades (cid:2) Compatible with most industry standard (cid:2) –40ºC to +100ºC PCB temperature DC-DC converters (cid:2) Compatible with most industry standard DC-DC converters Front-end Modules Input Filter Modules Output Filter Modules page 18-22 page 24 page 25 MIL-COTS Version MIL-COTS Version MIL-COTS Version Available Available Available Page 35 Page 36 Page 36 (cid:2) Up to 1,000 W power output (cid:2) 24, 48 and 300 V models (cid:2) 5 – 50 V, Up to 20 A (cid:2) 85 – 264 Vac input (cid:2) Efficiency: Up to 98% (cid:2) 3 – 30 V, Up to 30 A (cid:2) Efficiency:90 – 98% (cid:2) Agency approvals: (cid:2) Efficiency: Up to 98% (cid:2) Agency approvals: CE Marked, cTÜVus, cULus (cid:2) Up to 40 dB attenuation from 60 Hz to 1 MHz CE Marked, cTÜVus, cULus (cid:2) Operating temperature: (cid:2) Operating temperature: –55°C to +100°C (cid:2) Operating temperature: –55°C to +100°C –55°C to +100°C (cid:2) Designed to meet EN Class B, Bellcore (cid:2) Inrush current limiting and FCC transient and immunity

PICOR SOLUTIONS Cool-ORing™Series Controllers Cool-ORing™Series Full-Function Solutions page 16 page 17 (cid:2) Fast dynamic response (cid:2) Combines a high-speed ORing MOSFET controller (cid:2) 4 A gate discharge current anda very low on-state resistance ORing MOSFET (cid:2) Accurate MOSFET voltage sensing (cid:2) Integrated high-performance MOSFET PI2121: 8 V, 24 A, 1.5 mΩ (cid:2) Overtemperature fault detection PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET) (cid:2) Adjustable reverse current blanking timer PI2123: 15 V, 15 A, 3 mΩ (cid:2) Withstands 100 V transients in low-side PI2125: 30 V, 12 A, 5.5 mΩ applications (cid:2) Very small, high density optimized solution (cid:2) Master / Slave I/O for paralleling (cid:2) Fast dynamic response (cid:2) Active low-fault flag output (cid:2) Accurate sensing capability (cid:2) Compatible with bricks and V(cid:129)I Chips (cid:2) Compatible with bricks and V(cid:129)I Chips CONFIGURABLE POWER SUPPLIES VIPAC AC-DC or DC-DC Power Solution VIPAC Arrays DC Input Power System FlatPAC AC-DC Power Solution page 30 page 31 page 28 MIL-COTS Version Available Page 37 (cid:2) Input voltage ranges: (cid:2) Input voltages: 24,300, Vdc (cid:2) Input voltage: 115/230 Vac, 28 Vdc (MIL-COTS) 115/230 Vac input, autoranging (cid:2) Output voltages:2 – 54 Vdc (cid:2) Output voltages:2 – 48 Vdc (cid:2) Output voltages:1 – 95 Vdc (cid:2) Output power: 50 – 650 W (cid:2) Output power: Up to 900 W (cid:2) Output power: 50 – 600 W (cid:2) Array power: Up to 750 W (cid:2) Single, dual, or triple outputs (cid:2) Single, dual, or triple outputs (cid:2) Single, dual, triple or quad outputs (cid:2) Efficiency: 80 – 90% (cid:2) Low-noise ZCS / ZVS power technology (cid:2) Rugged, low profile, coldplate chassis (cid:2) Local or remote control (cid:2) Agency approvals: (cid:2) High-temperature capability CE Marked, cTÜVus, cULus ComPAC Input Power Solution MegaMod Chassis-mount Converter PFC FrontEnd 384 Vdc Output Front End page 32 page 33 page 19 MIL-COTS Version MIL-COTS Version Available Available Page 37 Page 37 (cid:2) Input voltages: (cid:2) Input voltage range: (cid:2) Input voltage ranges: 24, 48 and 300 Vdc 10 – 400 Vdc 85 – 264 Vac and 100 – 380 Vdc (cid:2) Output voltages:1 – 95 Vdc (cid:2) Output voltages:1 – 95 Vdc (cid:2) Output power: Up to 2,200 W (cid:2) Efficiency: 80 – 90% (cid:2) Output power: Up to 600 W (cid:2) Up to 4 non-isolated outputs (cid:2) Power density: Up to 10 W/in3 (cid:2) Single, dual, or triple outputs (cid:2) Operating temperature: –20°C to +45°C (full power) (cid:2) Low-noise FM control (cid:2) Efficiency: 80 – 90% (cid:2) DIN rail mountable (cid:2) ZCS / ZVS power architecture (cid:2) Low-noise ZCS power architecture

CONFIGURABLE POWER SUPPLIES PFC FlatPAC Single-Output Power System LoPAC Family Switcher Power Supplies MegaPAC Family User-Configured page 29 page 38 page 40 (cid:2) Input voltage range: (cid:2) Input voltage ranges: (cid:2) Input voltage ranges: 85 – 264 Vac 85 – 264 Vac and 100 – 380 Vdc 85 – 264 Vacand 100 – 380 Vdc (cid:2) Output power: Up to 575 W (cid:2) Output voltages: 2 – 95 Vdc (higher (cid:2) Output voltage: 2 – 95 Vdc (higher 2 – 54 Vdc voltage available with series arrays) voltage available with series arrays) (cid:2) High efficiency (cid:2) Output power: 25 – 1,500 W (cid:2) Output power: 25 – 4,000 W (cid:2) Current limit (cid:2) Up to 6 user-specifiable outputs (cid:2) Up to 20 outputs (cid:2) Remote sense (cid:2) Power density: Up to 11 W/in3 (cid:2) High power density FlatPAC-EN AC-DC Power Solution DC MegaPAC™ Power Switcher VME450™ Single-slot Power Supply page 39 page 45 page 45 (cid:2) Input voltage ranges: (cid:2) Input voltage range: 12 – 72 Vdc (cid:2) Vin max range: 18 –36 Vdc 90 – 132 / 180 – 264 Vac (cid:2) Output voltages: 2 – 95 Vdc (cid:2) Input power: 650 W 250 – 380 Vdc (cid:2) Output power: Up to 1,600 W (cid:2) Output power: 550 W (cid:2) Output voltages: 2 – 95 Vdc (cid:2) Up to 16 outputs (cid:2) Temperature: –40 to +85ºC (cid:2) Output power: Up to 500 W (cid:2) Low profile: 0.670 in. max. height (cid:2) Up to 4 user-specifiable outputs (cid:2) Utilizes Vicor’s V(cid:129)I Chips Javelin™ MIL-COTS Power Supply PowerBank™ Low Profile Supply Badger™ MIL-COTS Power Supply page 44 page 44 page 44 (cid:2) Input voltage ranges: 85 – 254 Vac (cid:2) Input voltage: 115/230 Vac (cid:2) Input voltage ranges: 85 – 264 Vac and (PFC) / 85 – 380 Vdc 100 – 380 Vdc (cid:2) Output voltages: 1.8 – 52 V (cid:2) Output voltages: Single output 2, 3.3, (cid:2) Output power: 1000 W @ 230 Vac input, (cid:2) Output power: Up to 1,800 W 5, 12, 15, 24, 28, 48 Vdc 800 W @ 115 Vac input (cid:2) Up to 12 non-isolated outputs (cid:2) Output power: 600 – 5,400 W (cid:2) Operating temperature: –20°C to +50°C (cid:2) Operating temperature: –55°C to +65°C CUSTOM SOLUTIONS Don’t see what you need... Vicor Custom Power can design and manufacture a power supply built to your unique specifications. We specialize in turnkey custom power systems for electronic equipment manufacturers in the datacom, telecom, industrial, test equipment, medical, information technology, and MIL-COTS markets. Utilizing Vicor component power modules in a building-block design approach offers low cost, quick turnaround, and reliable performance. For more information on custom solutions, see pages 42 – 43.

DC-DC V(cid:129)I Chip Web ExpressCode: vichip The V(cid:129)I Chip™ Advantage Density, Efficiency, Flexibility, & Speed RoHS Vicor’s V(cid:129)I Chips, new families of integrated power components, give the power architect new ways to create small, cost-effective, high-performance power system solutions. V(cid:129)I Chips increase power system flexibility by separating or factorizing a DC-DC converter into two components. One component provides a regulation function (PRM™), and another provides transformation and isolation (VTM™/ BCM™). This allows the power system designer to select only the functions that are needed, where they are needed. Regulation Transformation & Isolation PRM VTM BCM Shown at actual size. NP NS NP NS VI BRICKs L PRM, VTM, BCM models available Regulator Voltage Transformer Bus Converter Baseplate with through-hole pins Page 8 – 10 DC-DC Conversion Using PRM & VTM Bus Conversion Using BCMs System solution with low component count Enable dense IBA Power Systems (cid:2) VTM isolation and transformation at the point of load (cid:2) High density bus converter > 1,000 W/in3 (cid:2) PRM regulation can be collocated with or remote from the VTM (cid:2) Efficiency: Up to 96.5% (cid:2) Efficiency: Up to 93% (cid:2) Minimize total system capacitance (cid:2) High power density: Up to 517 W/in3 niPOL 1/4 the capacitance volume here... LOAD L niPOL PRM VTM BCM LOAD L SOURCE NP NS LOAD SOURCE NP NS niPOL L LOAD L niPOL LOAD L ...little or no capacitance needed here. High Current Low Voltage Supply High Voltage Outputs High Power Arrays (cid:2) Enable twice the current in half the space (cid:2) Put VTM stages in series to achieve (cid:2) Parallel PRMs and VTMs to output voltages greater than 55 V create multi-kW power systems (cid:2) Up to 295 W or 200 A VTM PRM VTM PRM VTM PRM NP NS SOURCE L NP NS L NP NS SOURCE LOAD LOAD SOURCE LOAD L VTM VTM PRM VTM NP NS NP NS NP NS L 4 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC V(cid:129)I Chip Web ExpressCode: bcm BCM™ Bus Converter Module RoHS The BCM is a member of the new family of V(cid:129)I Chips. It provides an isolated intermediate bus voltage to power non-isolated POL converters from a narrow range DC input, or it can be used as an independent DC source.The BCM offers superior performance and lower cost than conventional bus converters. BCMs are available in standard 48 V telecom as well as in high-voltage offline input ranges. Due to the fast response time and low noise of the BCM, the need for limited life aluminum electrolytic or tantalum capacitors at the load is reduced – or eliminated – resulting in savings of board area, materials, and total system cost. Features (cid:2) Fixed-ratio bus converter (cid:2) Output power: Up to 330 W (cid:2) Available in 48, 352, and 384 V inputs (cid:2) Small footprint: 1.1in2(7.1 cm2) VI BRICK (cid:2) High density: Up to 1,100 W/in3 (cid:2) Pick & place / SMD compatible BCM model Page 10 (cid:2) Isolation to 4,242 Vdc (cid:2) Through-hole pin option Heat Sinks MIL-COTS Version (cid:2) Efficiency: Up to 96.5% (cid:2) 125°C operation (Tj) Available Available (cid:2) >3.5 million hours MTBF Page 48 Page 34 Part Numbering For a complete listing of our BCM model numbers, go to vicorpower.com/vichip B 0 4 8 F 1 2 0 T 3 0 Bus Converter Input Voltage Configuration Output Voltage Product Grade Temperatures Output Power Module Designator F = J-Lead Designator Storage Operating (Tj) Designator T = Through hole ( = Vout X10 ) T –40 to 125°C –40 to 125°C ( = POUT/10 ) M –65 to 125°C –55 to 125°C VI B x x x x T F J Branding FPA Family Product Product Grade Temperatures Package Size Leadform B = Bus Reference Storage (Tst) Operating (Tj) F = Full J = J-Lead (SMT) V(cid:129)I Chip Converter Reference Only T –40 to 125°C –40 to 125°C H = Half T= Through Hole Module M –65 to 125°C –55 to 125°C Vout Input Voltage K Factor Max Power Pack Size BCM Model No. @ 48 Vin Range 1/32 1.5 Vdc 1.19 – 1.71 Vdc 135 W Full B048F015T14 1/16 3.0 Vdc 2.38– 3.43 Vdc 210 W Full B048F030T21 1/12 4.0 Vdc 3.17– 4.58 Vdc 200 W Full B048F040T20 1/8 6.0 Vdc 4.75– 6.87 Vdc 240 W Full B048F060T24 1/6 8.0 Vdc 6.34– 9.16 Vdc 240 W Full B048F080T24 38 – 55 Vdc 1/5 9.6 Vdc 7.60– 11.00 Vdc 240 W Full B048F096T24 1/4 12.0 Vdc 9.50– 13.75 Vdc 120 W Half VIB0101THJ 1/4 12.0 Vdc 9.50 – 13.80 Vdc 300 W Full B048F120T30 1/3 16.0 Vdc 12.70 – 18.30 Vdc 240 W Full B048F160T24 1/2 24.0 Vdc 19.00 – 26.50 Vdc [b] 300 W Full B048F240T30 2/3 32.0 Vdc 25.30 – 36.70 Vdc 300 W Full B048F320T30 1 48.0 Vdc 38.00 – 55.0 0 Vdc 300 W Full B048F480T30 [b] Vin = 38 – 53 Vdc Vout Input Voltage K Factor Max Power Pack Size BCM Model No. @ Nom. Vin Range 360 – 400 Vdc 1/32 12.0 Vdc 11.30 – 12.50 Vdc 300 W Full B384F120T30 330 – 365 Vdc 1/32 11.0 Vdc 10.30 – 11.40 Vdc 300 W Full VIB0001TFJ 360 – 400 Vdc 1/8 48.0 Vdc 45.00 – 50.00 Vdc 325 W Full VIB0002TFJ 330 – 365 Vdc 1/8 44.0 Vdc 41.25 – 45.63 Vdc 325 W Full VIB0003TFJ U.S. & CANADA: 800-735-6200 VICORPOWER.COM 5 Consult back cover for a complete list of contacts.

DC-DC V(cid:129)I Chip Web ExpressCode: prm PRM™ Regulator RoHS The PRM is a high-efficiency, non-isolated regulator capable of both boosting and bucking a wide-range input voltage. PRMs may be used independently, as stand-alone regulators, or together with downstream V(cid:129)IChip VTMs™— fast, efficient, isolated low-noise point-of-load (POL) converters. PRMs feature unique "Adaptive Loop" compensation feedback: a single-wire alternative to traditionalremote sensing and feedback loops that enables precise control of an isolated POL voltage without the need for either a direct connection to the POL or for noise sensitive, bandwidth limiting, isolationdevices in the feedback path. VI BRICK PRM model Page 8 Features (cid:2) ZVS buck / boost regulator (cid:2) Small footprint: 1.1in2(7.1 cm2) MIL-COTS Version Available (cid:2) Provides factorized bus for 48 Vin VTMs (cid:2) 125ºC operation (Tj) Page 34 (cid:2) Available in 24, 36 and 48 V models (cid:2) J-Lead package Heat Sinks Available (cid:2) Efficiency: Up to 97% (cid:2) Through-hole pin option Page 48 (cid:2) High density: Up to 1,105 W/in3 (cid:2) Pick & place / SMD compatible Part Numbering For a complete listing of our PRM model numbers, go to vicorpower.com/vichip P 0 4 8 F 0 4 8 T 2 4 A L Pre-Regulator Input Voltage Configuration Nominal Factorized Product Grade Temperatures Output Power Adaptive Loop Module Designator F = J-Lead Bus Voltage Storage Operating (Tj) Designator T = Through Hole T –40 to 125°C –40 to 125°C ( = Pf/10) M –65 to 125°C –55 to 125°C Max Output Input Voltage PRM Model No. Trim / Vf Range Power Current 240 W 5.0 A P048F048T24AL 36 – 75 Vdc 120 W 2.5 A P048F048T12AL 320 W 6.6 A P045F048T32AL 38 – 55 Vdc 26 – 55 V 170 W 3.5 A P045F048T17AL 18 – 36 Vdc 120 W 2.5 A P024F048T12AL 18 – 60 Vdc 120 W 2.5 A P036F048T12AL Note:See individual data sheets for additional model specifications and configurations. Application Examples Vo = VL ± 1.0% VPTIPNLMCCRCPRM-ALONCVSSHGCCDS VPTIPNLMCCRCPRM-ALVSSONCHGCCDS RRCODS FBacutso r(iVzef)d TM+InVTM+-OOuutt OL +In +Out +In +Out VC A Vin –In –Out Vout Vin –In –Out V f = VKL +(Io(cid:129)KRo) PC-In RKo+-OOuutt D Regulator DC-DC Converter 6 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC V(cid:129)I Chip Web ExpressCode: vtm VTM™ Voltage Transformer RoHS The VTM provides an isolated voltage to the point of load. Utilizing a Sine Amplitude Converter (SAC), it offers unprecedented performance in the critical areas of speed, noise, efficiency and density.VTMs address output requirements from 0.8 – 55 Vdc at up to 100 A, all in a surface-mount package only one-quarter of a cubic inch in volume. VTMs operateover an input voltage range of 26 – 55 Vdc— the "factorized bus"— and are a fixed-ratio device that requires a PRM or other stabilized voltage source for regulation. Features (cid:2) Fixed ratio DC-DC converter (cid:2) 125°C operation (Tj) VI BRICK (cid:2) Output: Up to 100 A / 300 W (cid:2) 1 µs transient response VTM model Page 9 (cid:2) High density: Up to 345 A/in3 (cid:2) >3.5 million hours MTBF (cid:2) Small footprint: 1.1in2(7.1 cm2) (cid:2) J-Lead package Heat Sinks MIL-COTS Version (cid:2) Low weight: 0.5 oz (15 g) (cid:2) Through-hole pin option Available Available (cid:2) Pick & place / SMD compatible (cid:2) Isolation to 2,250 Vdc Page 48 Page 34 (cid:2) Efficiency: Up to 97% Part Numbering For a complete listing of our VTM model numbers, go to vicorpower.com/vichip V 0 4 8 F 1 2 0 T 0 2 5 Voltage Input Voltage Configuration Output Voltage Product Grade Temperatures Output Current Transformation Designator F = J-Lead Designator Storage Operating (Tj) Designator Module T = Through Hole ( = Vout X10 ) T –40 to 125°C –40 to 125°C ( = Iout ) M –65 to 125°C –55 to 125°C Vout Input Voltage K Factor Output Current VTM Model No. @ 48 Vin Range 1/32 1.5 Vdc 0.82 – 1.71 Vdc 100 A V048F015T100 1/24 2.0 Vdc 1.09 – 2.29 Vdc 80 A V048F020T080 1/16 3.0 Vdc 1.63 – 3.43 Vdc 70 A V048F030T070 1/12 4.0 Vdc 2.17 – 4.58 Vdc 50 A V048F040T050 1/8 6.0 Vdc 3.25 – 6.87 Vdc 40 A V048F060T040 26 – 55 Vdc 1/6 8.0 Vdc 4.34 – 9.16 Vdc 30 A V048F080T030 1/5 9.6 Vdc 6.40 – 11.00 Vdc 25 A V048F096T025 [a] 1/4 12.0 Vdc 6.50 – 13.80 Vdc 25 A V048F120T025 1/3 16.0 Vdc 8.67 – 18.30 Vdc 15 A V048F160T015 1/2 24.0 Vdc 13.80 – 26.50 Vdc 12 A V048F240T012 [b] 2/3 32.0 Vdc 17.30 – 36.70 Vdc 9 A V048F320T009 1 48.0 Vdc 26.00 – 55.00 Vdc 6 A V048F480T006 [a]Vout = 6.4 Vdc @ 32 Vin [b]Vout = 14.0 Vdc @ 28 Vin U.S. & CANADA: 800-735-6200 VICORPOWER.COM 7 Consult back cover for a complete list of contacts.

DC-DC VI BRICKs Web ExpressCode:vibprm VI BRICK PRM Thermally Enhanced Package RoHS The VI BRICK PRM is a very efficient non-isolated regulator designed to provide a controlled Factorized Bus distribution voltage for powering downstream VI BRICK or V(cid:129)IChipVoltage Transformation Modules. In combination, VI BRICK PRMs and VTMs form a complete DC-DC Converter subsystem offering all of the unique benefits of Vicor’s Factorized Power Architecture (FPA): high density and efficiency; low noise operation; architectural flexibility; extremely fast transient response; elimination of bulk capacitance at the point of load (POL); in a brick style package. Features MIL-COTS Version (cid:2) 100°C baseplate operation (cid:2) Efficiency: Up to 97% Available (cid:2) Input voltages: 24, 36, 45 and 48 Vdc (cid:2) Fast transientresponse Page 34 (cid:2) Low profile: 0.37 in. (9.5 mm) (cid:2) Low noise operation (cid:2) Low weight: 1.07 oz (30.3 g) (cid:2) Rugged robust package (cid:2) Small footprint: 2.08 in2 (cid:2) Lead free wave solder compatible (cid:2) ZVS buck-boost regulator (cid:2) Agency approvals Part Numbering Ordering, see back cover for contacts P R 0 4 8 A 4 8 0 T 0 2 4 F P Pre-Regulator Input Voltage Package Size Output Voltage Product Grade Temperatures Output Power Baseplate Pin Style Module Designator Designator Storage Operating Designator F = Slotted flange P = Through hole ( = VOUTX 10 ) T –40 to 125°C –40 to 100°C ( = POUT / 10) P = Pin-fin heat sink[a] M –65 to 125°C –55 to 100°C [a] Contact factory Max Output Input Voltage PRM Model No. Trim / Vf Range Power Current 240 W 5.0 A PR048A480T024FP 36 – 75 Vdc 120 W 2.5 A PR048A480T012FP 320 W 6.6 A PR045A480T032FP 38 – 55 Vdc 26 – 55 V 170 W 3.5 A PR045A480T017FP 18 – 36 Vdc 120 W 2.5 A PR024A480T012FP 18 – 60 Vdc 120 W 2.5 A PR036A480T012FP Note:See individual data sheets for additional model specifications and configurations. Regulation DC Source PRM 8 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC VI BRICKs Web ExpressCode:vibvtm VI BRICK VTM Thermally Enhanced Package RoHS The VI BRICK VTM current multiplier excels at speed, density and efficiency to meet the demands of advanced power applications.Combined with the VI BRICK or V(cid:129)I Chip PRM regulator the VI BRICK VTM creates a DC-DC converter with flexibility to provide isolation and regulation where needed. The PRM can be located with the VTM at the point of load or remotely in the back plane or on a daughtercard. Features (cid:2) 100°C baseplate operation (cid:2) ZVS / ZCS isolated sine amplitude converter (cid:2) Up to 100 A or 300 W (cid:2) Efficiency: Up to 97% (cid:2) High density: Up to 390 W/in3 (cid:2) <1 µs transient response MIL-COTS Version Available (cid:2) Small footprint: 2.08 in2 (cid:2) Isolated output Page 34 (cid:2) Low profile: 0.37 in. (9.5 mm) (cid:2) No output filtering required (cid:2) Low weight: 1.10 oz (31.3 g) (cid:2) Lead free wave solder compatible (cid:2) Agency approvals Part Numbering Ordering, see back cover for contacts V T 0 4 8 A 1 2 0 T 0 2 5 F P Voltage Input Voltage Package Size Output Voltage Product Grade Temperatures Output Current Baseplate Pin Style Transformation Designator Designator Storage Operating Designator F = Slotted flange P = Through hole Module ( = VOUTX 10 ) T –40 to 125°C –40 to 100°C ( = lout ) P = Pin-fin heat sink[a] M –65 to 125ºC –55 to 100ºC [a] Contact factory Vout Input Voltage K Factor Output Current VTM Model No. @ 48 Vin Range 1/32 1.5 Vdc 0.82 – 1.71 Vdc 100 A VT048A015T100FP 1/24 2.0 Vdc 1.09 – 2.29 Vdc 80 A VT048A020T080FP 1/16 3.0 Vdc 1.63 – 3.43 Vdc 70 A VT048A030T070FP 1/12 4.0 Vdc 2.17 – 4.58 Vdc 50 A VT048A040T050FP 1/8 6.0 Vdc 3.25 – 6.87 Vdc 40 A VT048A060T040FP 26 – 55 Vdc 1/6 8.0 Vdc 4.34 – 9.16 Vdc 30 A VT048A080T030FP 1/5 9.6 Vdc 6.40 – 11.00 Vdc 25 A VT048A096T025FP [b] 1/4 12.0 Vdc 6.50 – 13.80 Vdc 25 A VT048A120T025FP 1/3 16.0 Vdc 8.67 – 18.30 Vdc 15 A VT048A160T015FP 1/2 24.0 Vdc 13.80 – 26.50 Vdc 12 A VT048A240T012FP [c] 2/3 32.0 Vdc 17.30 – 36.70 Vdc 9 A VT048A320T009FP 1 48.0 Vdc 26.00 – 55.00 Vdc 6 A VT048A480T006FP Note:See individual data sheets for additional model specifications and configurations. [b]Vout = 6.4 Vdc @ 32 Vin [c]Vout = 14.0 Vdc @ 28 Vin Transformation / Isolation Output 1 VTM Load Output 2 VTM Load Output 3 VTM Load U.S. & CANADA: 800-735-6200 VICORPOWER.COM 9 Consult back cover for a complete list of contacts.

DC-DC VI BRICKs Web ExpressCode: vibbcm VI BRICK BCM Thermally Enhanced Package RoHS VI BRICK BCM modules use advanced Sine Amplitude ConverterTM(SAC) technology, thermally enhanced packaging technologies, and advanced manufacturing processes to provide high power density and efficiency, superior transient response, and improved thermal management. These modules can be used to provide an isolated intermediate bus to power non-isolated POL converters and due to the fast response time and low noise of the BCM, capacitance can be reduced or eliminated near the load. Features (cid:2) 100°C baseplate operation (cid:2) Isolated output (cid:2) 48 V, 352, and 384 V Bus Converters (cid:2) No output filtering required (cid:2) High density: Up to 390 W/in3 (cid:2) <1 µs transient response (cid:2) Small footprint: 2.08 in2 (cid:2) Fast transient response (cid:2) Height above board: 0.37 in (9.5 mm) (cid:2) Lead free wave solder compatible (cid:2) Efficiency: Up to 96% (cid:2) Agency approvals Part Numbering Ordering, see back cover for contacts B C 0 4 8 A 0 1 5 T 0 1 4 F P Bus Converter Input Voltage Package Size Output Voltage Product Grade Temperatures Output Power Baseplate Pin Style Module Designator Designator Storage Operating Designator F = Slotted flange P = Through hole ( = VOUTX 10 ) T –40 to 125°C –40 to 100°C ( = POUT / 10) P = Pin-fin heat sink[a] M –65 to 125°C –55 to 100°C [a] Contact factory Vout Input Voltage K Factor Max Power BCM Model No. @ 48 Vin Range 1/32 1.5 Vdc 1.19 – 1.71 Vdc 135 W BC048A015T014FP 1/16 3.0 Vdc 2.38 – 3.43 Vdc 210 W BC048A030T021FP 1/12 4.0 Vdc 3.17 – 4.58 Vdc 200 W BC048A040T020FP 1/8 6.0 Vdc 4.75 – 6.87 Vdc 240 W BC048A060T024FP 1/6 8.0 Vdc 6.34 – 9.16 Vdc 240 W BC048A080T024FP 38 – 55 Vdc 1/5 9.6 Vdc 7.60 – 11.00 Vdc 240 W BC048A096T024FP 1/4 12.0 Vdc 9.50 – 13.80 Vdc 300 W BC048A120T030FP 1/3 16.0 Vdc 12.70 – 18.30 Vdc 240 W BC048A160T024FP 1/2 24.0 Vdc 19.00 – 26.50 Vdc[b] 300 W BC048A240T030FP 2/3 32.0 Vdc 25.30 – 36.70 Vdc 300 W BC048A320T030FP 1 48.0 Vdc 38.00 – 55.0 0 Vdc 300 W BC048A480T030FP 330 –365 Vdc 1/32 11.0 Vdc 10.3 –11.4 Vdc 240 W BC352A110T024FP 330 –365 Vdc 1/32 11.0 Vdc 10.3 –11.4 Vdc 300 W BC352A110T030FP 360 –400 Vdc 1/32 12.0 Vdc 11.3 –12.5 Vdc 300 W BC384A120T030FP Note:See individual data sheets for additional model specifications and configurations. [b] Vin = 38 – 53 Vdc Typical Application F1 POL +IN +OUT + POL enable / disable C1 -OUT Vout switch TM Vin RSV BCM POL SW1 2R k2Ω PC +OUT D1 POL – -IN -OUT (power good indicator) 10 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC VI BRICKs Web ExpressCode: vibdcdc VI BRICK DC-DC Converter RoHS VI BRICK DC-DC converters use advanced Sine Amplitude Converter(SAC) technology, thermally enhanced packaging technologies, and advancedCIM processes to provide high power density and efficiency, superior transient response, and improved thermal management. The high speed 3.5 MHz, zero-current switching / zero-voltage switching (ZCS / ZVS) design enables efficient and low noise operation throughout the entire operating range. Features (cid:2) DC input range: 36– 75 V (cid:2) Highly efficient: ZCS / ZVS switching (cid:2) Efficiency: Up to 93% (cid:2) Fast dynamic response (cid:2) DC output: 1 – 48 V (cid:2) Low profile: 0.37 in. (9.5 mm) (cid:2) Maximum operating temp: 100°C, full load (cid:2) Power density: Up to 145 W/in3 (cid:2) Isolated output (cid:2) Lead free wave solder compatible (cid:2) Low noise: Sine Amplitude (cid:2) Agency approvals Converter(SAC) technology Part Numbering Ordering, see back cover for contacts D C 0 4 8 B 0 5 0 T 0 1 8 F P DC-DC Input Voltage Package Size Output Voltage Product Grade Temperatures Output Power Baseplate Pin Style Converter Designator Designator Storage Operating Designator F = Slotted flange P = Through hole Module ( = VOUTX 10 ) T –40 to 125°C –40 to 100°C ( = POUT / 10) P = Pin-fin heat sink[a] M –65 to 125°C –55 to 100°C [a] Contact factory Output Voltage Output Power (W) Current (A) Efficiency (%) Part Numbering 1.0 Vdc 100 100 85 DC048B010T010FP 1.5 Vdc 120 80 87 DC048B015T012FP 1.8 Vdc 144 80 89 DC048B018T014FP 2.5 Vdc 175 70 90 DC048B025T017FP 3.0 Vdc 180 60 91 DC048B030T018FP 3.3 Vdc 165 50 91 DC048B033T016FP 5 Vdc 180 36 91 DC048B050T018FP 10 Vdc 180 18 92 DC048B100T018FP 12 Vdc 220 18.33 92 DC048B120T022FP 15 vdc 200 13.33 92 DC048B150T020FP 24 Vdc 220 9.17 92 DC048B240T022FP 28 Vdc 190 6.79 92 DC048B280T019FP 48 Vdc 220 4.58 93 DC048B480T022FP U.S. & CANADA: 800-735-6200 VICORPOWER.COM 11 Consult back cover for a complete list of contacts.

DC-DC BRICKs Web ExpressCode: bricks1 VI-200 & VI-J00 Series Converter Modules RoHS VI-200 and VI-J00 converters feature wide input voltage ranges, remote sense, enhancedoutput programmability, logic disable, and low quiescent current. VI-200 product series feature output overvoltage protection and thermal shut down. VI-J00 product series, at half the size of VI-200 converters, operate to 100˚C. Both product series are safety agency approved, accelerating your time to market. Features (cid:2) Input voltage range: 10 – 400 Vdc (cid:2) Dimensions: VI-200 Series:4.6" x 2.4" x 0.5" (cid:2) Output voltages: 1 – 95 Vdc (116,9 x 61,0 x 12,7 mm) (cid:2) Output power (per module): MIL-COTS Version VI-200 Series: 50 – 200 W (cid:129)VI-J00 Series: 25 – 100 W VI-J00 Series: 2.28" x 2.4" x 0.5" Available (57,9 x 61,0 x 12,7 mm) Page 35 (cid:2) Parallelable for higher power (VI-200) (cid:2) Weight: (cid:2) 3,000 Vrms isolation VI-200 Series:6.0 oz / 170 g Battery Charging & (cid:2) 100°C operation: (85°C for VI-200 Series) VI-J00 Series: 3.0 oz / 85 g Packaging Options (cid:2) Output voltage trim range: 50 – 110% (cid:2) Low-noise ZCS / ZVS Page 23 power architecture (cid:2) Efficiency: Up to 90% (cid:2) Agency approvals: cULus, cTÜVus, CE Marked (cid:2) 4 temperature grades General Performance Refer to data sheet for detailed specifications Parameter C-, I-, M-Grade E-Grade Input voltage and output voltage See chart on page 13 Set point accuracy 0.5% 1.0% Load / line regulation (max) 0.2% 0.5% Output temperature drift 0.01%/°C 0.02%/°C Peak-to-peak output ripple (max) 1.5% 3% Trim range [a] 50– 110% 50– 110% Total remote sense compensation 0.5 V 0.5 V OVP set point (VI-200 Series only) 125% 125% Current limit 105– 125% 105– 135% Efficiency (output ≥5 V) 80– 90% 78– 88% Power sharing accuracy (VI-200 Series only) ±5% ±5% Input reflected ripple current 10% 10% No-load power dissipation 1.35 W 1.35 W Isolation Input to output 3,000 Vrms 3,000 Vrms Input to baseplate 1,500 Vrms 1,500 Vrms Output to baseplate 500 Vrms 500 Vrms Max. baseplate temperature: VI-200 Series (VI-J00 Series) 85°C (100°C) 85°C (100°C) [a] 10 V, 12 V and 15 V outputs, standard trim range ±10-%. Consult factory for wider trim range. 95 V outputs cannot be trimmed up. Visit vicorpower.com & get your Design Guide 12 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC BRICKs Web ExpressCode: prodselect Part Number Configuration Chart VI-200 & VI-J00 IMPORTANT NOTICE: PLEASE READ BEFORE STARTING The part numbering format below is for Vicor VI-200 and VI-J00 DC-DC Configure Your BRICK Online converters and configurables. The power levels shown are the maximum PO ERBENCH available for every input and output voltage combination. If you need more power than a VI-200 (“driver”), add parallel “booster” modules vicorpower.com/powerbench (of the same power level). For lower power versions use PowerBench at vicorpower.com. V I - J 6 1 - C W Family Series Input Output Grade Output Power VI Non-RoHS 2 200 0 12 V N 48V Z 2V M 10V K 40V E –10°C ≥ 5 V < 5 V VE RoHS J J00 V 24 V 4 72V Y 3.3V 1 12V 4 48V C –25°C U 200 W U 40 A B Booster 1 24V T 110V 0 5V P 13.8V H 52V I –40°C V 150W V 30 A W24V 5 150V X 5.2V 2 15V F 72V M –55°C W 100 W W 20 A 2 36V 6 300V W 5.5V N 18.5V D 85V X 75 W X 15 A 3 48V 7 150/300V V 5.8V 3 24V B 95V Y 50 W Y 10 A T 6.5V L 28V Z 25 W Z 5 A R 7.5V J 36V Designators VI-200 & VI-J00 Family and Accessory Modules Maximum Power available for VI-2(B)xx-xx Output Voltages Vin Input 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.524 28 36 40 48 52 72 85 95 Designator Voltage Z Y 0 X W V T R M 1 P 2 N 3 L J K 4 H F D B 0 12 (10-20) X X X X X X X X X X X X X X X X X X X X X X V 24 (10-36) -- X Y Y Y Y Y X X X X X X X X X X X -- -- -- -- 1 24 (21-32) U U U U U U V V U U U U U U U U U U U U U U W 24 (18-36) V V V V V V W W V V V V V V V V V V V V V V 2 36 (21-56) W V W W W W W W W W W W W W W W W W W -- -- -- 3 48 (42-60) U U U U U U U U U U U U U U U U U U U U U U N 48 (36-76) V U U U U U U U U U U U U U U U U U U U U U 4 72 (55-100) U U U U U U V V U U U U U U U U U U U U U U T 110 (66-160) V V V V V V W W V V V V V V V V V V V V -- -- 5 150 (100-200) U U V V V V V V U U U U U U U U U U U U U U 7 150 (100-375) W W Y Y Y Y W W W W W W W W W W W W W -- -- -- 6 300 (200-400) U U U U U U V V U U U U U U U U U U U U U U Maximum Power available for VI-Jxx-xx Output Voltages Vin Input 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.524 28 36 40 48 52 72 85 95 Designator Voltage Z Y 0 X W V T R M 1 P 2 N 3 L J K 4 H F D B 0 12 (10-20) X X Y Y Y Y Y Y X X X X X X X X X X X X X X V 24 (10-36) -- Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y -- -- -- -- 1 24 (21-32) W W W W W W X X W W W W W W W W W W W W W W W 24 (18-36) W W W W W W X X W W W W W W W W W W W W W W 2 36 (21-56) Y Y Y Y Y Y Y Y X X X X X X X X X X X -- -- -- 3 48 (42-60) W W W W W W X X W W W W W W W W W W W W W W N 48 (36-76) W W X X X X X X W W W W W W W W W W W W W W 4 72 (55-100) W W W W W W X X W W W W W W W W W W W W W W T 110 (66-160) W W X X X X X X W W W W W W W W W W W W -- -- 5 150 (100-200) W W W W W W X X W W W W W W W W W W W W W W 7 150 (100-375) Y Y Y Y Y Y Y Y X X X X X X X X X X X -- -- -- 6 300 (200-400) W W W W W W X X W W W W W W W W W W W W W W Note:See Design Guide & Applications Manualfor VI-200 & VI-J00 Family, DC-DC Converters & Configurable Power Supplies U.S. & CANADA: 800-735-6200 VICORPOWER.COM 13 Consult back cover for a complete list of contacts.

DC-DC BRICKs Web ExpressCode: bricks2 Maxi, Mini, Micro Series Converter Modules RoHS Maxi, Mini, Micro Series DC-DC converter modules use advanced power processing, control, and packaging technologies to provide the performance, flexibility, and cost effectiveness expected of a mature power component. High-frequency ZCS / ZVS switching, advanced power semiconductor packaging, and thermal management provide high power density with low noise and high efficiency. Features (cid:2) 24 V input: 18 – 36 Vdc (cid:2) Single-wire paralleling 28 V input: 10 –36 Vdc (cid:2) Input undervoltage lockout 48 V input: 36 – 75 Vdc 72 V input: 43 –110 Vdc (cid:2) Output overvoltage protection 110 V input: 66 –154 Vdc (cid:2) Overtemperature shut down 150 V input: 100 –200 Vdc (cid:2) Module fault alarm 300 V input: 180 – 375 Vdc Module Mounting & MIL-COTS Version (cid:2) ZCS / ZVS power architecture Interconnect Options Available 375 V input: 250 – 425 Vdc (cid:2) Output voltage trim: 10 – 110% Page 50 Page 35 (cid:2) 100°C, no derating (cid:2) Bias supply to power (cid:2) High efficiency external circuitry (cid:2) Low-noise ZCS / ZVS (cid:2) Logic enable / disable Configure Your BRICK Online (cid:2) Up to 120 W/in3 (cid:2) 5 temperature grades PO ERBENCH (cid:2) 3,000 Vac isolation vicorpower.com/powerbench General Performance Refer to data sheet for detailed specifications Parameter Specifications Notes Set point accuracy ±1% Vout nom. Nominal input; full load; 25°C Line regulation ±0.02% Vout nom. Low line to high line; full load Load regulation ±0.02% Vout nom. No load to full load; nominal input Temperature regulation ±0.002% Vout/°C –20 to 100°C (C-Grade) Remote sense compensation 0.5 V Maxi and Mini only Overvoltage set point 115% Vout nom. Current limit 115% Iout typ. Vout 95% of nominal Short-circuit current 115% Iout typ. Output voltage <250 mV Efficiency Up to 90% Nominal input; 80% load; 25°C Programming range 10 – 110% Vout nom. Isolation voltage 3,000 Vrms Input to output Dimensions Maxi full-brick 4.6" x 2.2" x 0.5" (117 x 55,9 x 12,7 mm) Up to 600 W Mini half-brick 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Up to 300 W Micro quarter-brick 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) Up to 150 W Agency approvals cULus, cTÜVus, CE Marked Design Guide & Applications Manual Maxi, Mini, Micro Family DC-DC Converters & Accessory Modules (cid:2) High density DC-DC converter technology (cid:2) Filter / autoranging rectifiers (cid:2) Control pin functions & applications (cid:2) Modular AC front-end system (cid:2) Design requirements (cid:2) High Boost HAM Visit (cid:2) EMC considerations (cid:2) Filter Input Attenuator Module vicorpower.com (cid:2) Current sharing in power arrays (cid:2) MIL-COTS Filter Input Attenuator & get your (cid:2) Thermal performance information (cid:2) Output ripple attenuator Design Guide 14 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC BRICKs Web ExpressCode: prodselect Part Numbering Maxi, Mini & Micro Series Converters Maxi example: Mini example: Micro example: V24A48M400BN V48B28C250BG V375C24C150BG 24 Vin, Maxi, 48 Vout @ 400 W, 48 Vin, Mini, 28 Vout @ 250 W, 375 Vin, Micro, 24 Vout @ 150 W, long ModuMate pins, slotted baseplate long RoHS pins, slotted baseplate long RoHS pins, slotted baseplate V 48 A 48 C 500 B L Input Package Output Product Grade Output Pin Style Baseplate Voltage[a] A = Maxi Voltage[a] E = –10 to +100°C Power Blank = Short tin / lead Blank = Slotted B = Mini C = –20 to +100°C L = Long tin / lead 2 = Threaded C = Micro T = –40 to +100°C S = Short ModuMate 3 = Through hole H = –40 to +100°C N = Long ModuMate M = –55 to +100°C F = Short gold (RoHS) [a]Consult factory for other input / output / power models. G = Long gold (RoHS) Designators Maxi, Mini, Micro Family Maximum Power available for Maxi (Full Brick) Input Output Voltages Voltage 2 V 3.3 V 5 V 6.5 V 8 V 12 V 15 V 24 V 28 V 32 V 36 V 48 V 54 V 24 (18-36) -- 264 W 400 W 400 W 300 W 400 W 400 W 400 W 400 W -- 400 W 400 W -- 28 (10-36) -- 150 W 175 W 200 W 200 W 200 W 200 W 200 W 200 W -- 200 W 200 W -- 48 (36-75) -- 264 W 400 W -- -- 500 W 500 W 500 W 500 W -- 500 W 500 W -- 72 (43-110) -- 264 W 300 W -- -- 400 W 400 W 400 W 400 W -- 400 W 400 W -- 110 (66-154) -- 200 W 300 W -- 300 W 400 W 400 W 400 W 400 W -- 400 W 400 W -- 150 (100-200) -- 264 W 400 W -- 400 W 500 W 500 W 500 W 500 W -- 500 W 500 W -- 300 (180-375) 160 W 264 W 400 W -- 400 W 500 W 500 W 500 W 500 W -- 500 W 500 W -- 375 (250-425) 160 W 264 W 400 W -- 400 W 600 W 600 W 600 W 600 W 600 W 600 W 600 W 600 W Maximum Power available for Mini (Half Brick) Output Voltages 2 V 3.3 V 5 V 6.5 V 8 V 12 V 15 V 24 V 28 V 32 V 36 V 48 V 54 V 24 (18-36) -- 150 W 200 W -- 200 W 200 W 200 W 200 W 200 W -- 200 W 200 W -- 48 (36-75) 100 W 150 W 200 W -- -- 250 W 250 W 250 W 250 W -- 250 W 250 W -- 72 (43-110) -- 100 W 150 W -- 150 W 250 W 250 W 250 W 250 W -- 250 W 250 W -- 110 (66-154) -- 100 W 150 W -- 150 W 200 W 200 W 200 W 200 W -- 200 W 200 W -- 150 (100-200) -- 150 W 200 W -- 200 W 250 W 250 W 250 W 250 W -- 250 W 250 W -- 300 (180-375) 100 W 150 W 200 W -- 200 W 250 W 250 W 250 W 250 W -- 250 W 250 W -- 375 (250-425) 100 W 150 W 200 W -- 200 W 300 W 300 W 300 W 300 W -- 300 W 300 W -- Maximum Power available for Micro (Quarter Brick) Output Voltages 2 V 3.3 V 5 V 6.5 V 8 V 12 V 15 V 24 V 28 V 32 V 36 V 48 V 54 V 24 (18-36) -- 75 W 100 W -- 100 W 100 W 100 W 100 W 100 W -- 100 W 100 W -- 28 (9-36) -- 50 W 50 W -- -- 100 W 100 W 100 W 100 W -- 100 W 100 W -- 48 (36-75) 50 W 75 W 100 W -- -- 150 W 150 W 150 W 150 W -- 150 W 150 W -- 72 (43-110) -- 75 W 100 W -- 100 W 150 W 150 W 150 W 150 W -- 150 W 150 W -- 110 (66-154) -- 50 W 75 W -- 75 W 100 W 100 W 100 W 100 W -- 100 W 100 W -- 150 (100-200) -- 75 W 100 W -- 100 W 150 W 150 W 150 W 150 W -- 150 W 150 W -- 300 (180-375) 50 W 75 W 100 W -- 100 W 150 W 150 W 150 W 150 W -- 150 W 150 W -- 375 (250-425) 50 W 75 W 100 W -- 100 W 150 W 150 W 150 W 150 W -- 150 W 150 W -- See Vicor PowerBench Online for intermediate power modules and to customize a solution. See Data Sheetfor detailed electrical specifications and intermediate power modules. U.S. & CANADA: 800-735-6200 VICORPOWER.COM 15 Consult back cover for a complete list of contacts.

Cool-ORing™ Series Universal Active ORing Controllers Web ExpressCode: oring PI2001 / PI2002 / PI2003 RoHS The Cool-ORing PI2001/2/3 are universal high-speed Active ORing controller IC solutions designed for use with N-channel MOSFETs in 5 mm x 6 mm redundant power system architectures. The PI2001/2/3 Cool-ORing 8-Lead controllers enable an extremely low power loss solution with fast dynamic 3 mm x 3 mm SOIC 10-Lead response to fault conditions, critical for high availability systems. The TDFN PI2001/3 control single or parallel MOSFETs to address Active ORing applications protecting against power source failures. The PI2003 is optimized for low side -48V Active ORing applications. An internal VC Features shunt regulator enables biasing of the controller directly from -48 V (GND). The PI2002 includes a load disconnect feature for use with back- (cid:2) Fast dynamic response to power source failures, with 160 ns reverse current turn-off delay time to-back N-channel MOSFETs in redundant power architectures. The gate drive output turns the MOSFET on in normal steady state (cid:2) 4 A gate discharge current operation, while achieving high-speed turn-off during input power source (cid:2) Accurate MOSFET drain-to-source voltage sensing fault conditions, which cause reverse current flow, with auto-reset once to indicate system level fault conditions the fault clears. The PI2002 has the added benefit of being able to (cid:2) Programmable under and overvoltage detection protect against output load fault conditions that may induce excessive (cid:2) Overtemperature fault detection forward current and device over-temperature by removing gate drive from (cid:2) Adjustable reverse current blanking timer the back-to-back MOSFETs with an auto-retry programmable off-time. (cid:2) Withstands 100 V transients in low-side applications (cid:2) Master / Slave I/O for paralleling (TDFN package only) (cid:2) Active-low fault flag output Part Numbering Part Number Package Target Bias MOSFET Gate MOSFET Gate Turn-off Shipment Application Supply Drive Voltage Discharge Current Delay Time Packaging Universal Low Voltage PI2001-00-QEIG Active ORing 8.5 V –10.5 V 160 ns (typ.) 3 x 3 mm Active ORing 4.5 V –13.2 V PI2002-00-QEIG 10 Lead TDFN w/ Load Disconnect 9.0 V –11.0 V Reverse Fault, 120 ns (typ.) PI2003-00-QEIG Low4 8Si dVe O Apcttiimveiz OedR ing Inte1r0n aVl V–C1 2C lVamp VC –0.25 V Forward Overcurrent, 150 ns (typ.) Tape 4 A (typ) and PI2001-00-SOIG UniveArcstaivl eL oOwR iVnogltage 8.5 V –10.5 V 160 ns (typ.) Reel 8 Lead Active ORing 4.5 V –13.2 V PI2002-00-SOIG SOIC w/ Load Disconnect 9.0 V –11.0 V Reverse Fault, 120 ns (typ.) 48 V Optimized Internal VC Clamp Forward Overcurrent, 150 ns (typ.) PI2003-00-SOIG Low Side Active ORing 10 V –12 V VC –0.25 V Evaluation Boards PI2001-EVAL1 PI2001 Evaluation Board using 3 x 3 mm TDFN package and SO-8 MOSFET in high-side configuration. (pg. 47) PI2002-EVAL1 PI2002 Evaluation Board using 3 x 3 mm TDFN package and back-to-back SO-8 MOSFETs in high-side configuration. (pg. 47) PI2003-EVAL1 PI2003 Evaluation Board using 3 x 3 mm TDFN package and 100 V SO-8 MOSFET in low-side configuration. (pg. 47) Typical Application PI2001 performance VIN1 Return Input Short 0V SP GATE SN UV PI2001 FT PI2003 VC AD 0AInput NoRrmevael rospee Crautriorenn (tforward current) VC VC FT LO Current GND OV SN GATE SP GND Vd (Redundant Bus) –Vin1 Vs (Input) VIN2 Reverse detection MO S SP GATE SN VC 0V Vgate FET VC VUCV PGI2ND001OV FT LOAD SN P I 2 GA0T0E 3 SP GNFDT Turn Of1f 6D0enlsay Time Miller Effect –Vin2 0V High-side Active ORing Low-side Active ORing Typical dynamic response of the PI2001 to an input power source short circuit fault condition 16 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

Cool-ORing™ Series Full-Function Active ORing Solutions Web ExpressCode: oring2 PI2121 / PI2122 / PI2123 / PI2125 RoHS The Cool-ORing PI2121/3/5 are complete full-function Active ORing solutions each with a high-speed ORing MOSFET controller and a very low on-state resistance MOSFET designed for use in redundant power system architectures. The PI2121/3/5 Cool-ORing solutions are offered in an extremely small, thermally enhanced 5 x 7 mm LGA package and can be used in low voltage (≤5 V bus, ≤9.6 V bus and ≤12 V bus respectively) high side Active ORing 5 mm x 7 mm x 2 mm Thermally Enhanced LGA applications. The PI2121/3/5 enable extremely low power loss with fast dynamic response to fault conditions, critical for high-availability systems. Features A master / slave feature allows the paralleling of PI2121/3/5 solutions for (cid:2) Combines a high-speed ORing MOSFET controller high-current, Active ORing requirements. and low on-state resistance MOSFET The PI2121/3/5 provide very high efficiency and low power loss during steady (cid:2) Integrated high-performance MOSFET PI2121: 8 V, 24 A, 1.5 mΩ state operation, while achieving high-speed turn-off of the internal MOSFET PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET) during input power source fault conditions, which cause reverse current flow. PI2123: 15 V, 15 A, 3 mΩ The PI2121/3/5 provide an active low fault flag output to the system during PI2125: 30 V, 12 A, 5.5 mΩ excessive forward current, light load, reverse current, overvoltage, undervoltage (cid:2) Very small, high density fully optimized solution and overtemperature fault conditions. (cid:2) Fast dynamic response to power source failures, The PI2122 is configured with back-to-back MOSFETs designed for use in ≤5 V with 160 ns reverse current turn-off delay time bus redundant power system architectures where added protection against (cid:2) Accurate sensing capability to indicate system fault load fault conditions is required. The back-to-back MOSFET provides a true conditions bi-directional switch capability to disconnect load fault conditions that may (cid:2) Programmable under and overvoltage functions induce excessive forward current and device over-temperature. (cid:2) Overtemperature fault detection (cid:2) Adjustable reverse current blanking timer (cid:2) Master / Slave I/O for paralleling (cid:2) Active-low fault flag output Part Numbering Part Number Package Voltage Current Target Internal MOSFET Bias Turn-off Shipment Rating Handling Application On-State Resistance Supply Delay Time Packaging PI2121-00-LGIZ 8 V (max) 24 A (max) ≤5 V Bus 1.5 mΩ (typ) Tape PI2122-00-LGIZ 5 x 7 mm 7 V (max) 12 A (max) ≤5 V Bus 6.0 mΩ (typ) 4.5 V –13.2 V 160 ns (typ.) and PI2123-00-LGIZ LGA 15 V (max) 15 A (max) ≤9.6 V Bus 3.0 mΩ (typ) Reel PI2125-00-LGIZ 30 V (max) 12 A (max) ≤12 V Bus 5.5 mΩ (typ) Evaluation Boards PI2121-EVAL1PI2121 Evaluation Board configured for a high-side ground referenced application. (pg. 47) PI2122-EVAL1PI2122 Evaluation Board configured for a high-side application. (pg. 47) PI2125-EVAL2PI2125 Evaluation Board configured for a high-side floating application. (pg. 47) Note:Both PI2121-EVAL1 and PI2125-EVAL2 are compatible with the PI2123 solution. Typical Applications PI2121 / PI2123 / PI2125 Performance VIN1 S D Vin 1 D1 D2 10X Reduction SP SN SP SN in Power Dissipation OV PI2121 SL N/C OV PI2122 VC Schottky Diode Reducing Thermal VC1 UVCV BK GND FT VC1FT Vaux VUCV SCD GND OCFDT FT ation (W) MOvaenrahgeeamdent p ssi Cool-ORing VVCIN22 UVOSSVCPVBKPIG2N1D21 SSFDNTL VNC/C2FT LOAD VVianu 2x VOSUDCPVV1 SPCDI 2 G1ND22 OCSDFND2T VCFT LOAD Power Di Input Current (A) PI2121: High-side Active ORing PI2122: High-side Active ORing Power dissipation comparison between Picor’s Cool-ORing solutions versus with Load Disconnect industry standard Schottky diode solutions U.S. & CANADA: 800-735-6200 VICORPOWER.COM 17 Consult back cover for a complete list of contacts.

AC-DC Front-ends Web ExpressCode: ham HAM Input Harmonic Attenuator Module RoHS The Harmonic Attenuator Module (HAM) accepts an input of 85 – 264 Vac. The “M” version provides a DC output compatible with Vicor’s 26x, J6x and user-defined Maxi, Mini and Micro DC-DC converters. The “L” version is compatible with V375 series DC-DC converters. The combination of a HAM, one or more Vicor DC-DC converters, and the 30205 line filter, listed on Page 51, offers a high-density power solution meeting EN61000-3-2. Features (cid:2) Power output:Up to 675 W (cid:2) Input: 85 – 264 Vac Part Numbering Ordering, see back cover for contacts (cid:2) Meets EN61000-3-2 (cid:2) 0.99 Power Factor V I - H A M - C L (cid:2) Short-circuit protection (cid:2) High efficiency (cid:2) Input-surge limiting Family Product Types Product Grade Output Power VI =Non-RoHS HAM = Driver HAM E = –10 to +85°C M = 600 W (cid:2) Dimensions: VE=RoHS HAMD = Driver HAM for C= –25 to +85°C L = 675 W [a] 4.6" x 2.4" x 0.5" use with the BAMD I = –40 to +85°C BAMD = Booster HAM M= –55 to +85°C (117 x 61,0 x 12,7 mm) [a] Compatible with V375 Maxi, Mini, Micro Series (cid:2) cULus, cTÜVus, CE Marked Note:If power requirements exceed the capability of one HAM, use a HAMD and one or more BAMDs, with an external bridge rectifier. HAM, HAMD, and BAMD modules require three surge suppressors in series directly across the input. These surge suppressors are already contained in the EMI filter P/N 30205. Also, use a 10 A, 3AG fast-blow fuse ahead of the line filter. General Performance Refer to data sheet for detailed specifications Parameter Specifications Notes 85 –264 Vac Continuous operation AC line input 47 –63 Hz Output power Up to 675 W Efficiency 92% Power factor 0.99 Total harmonic distortion [b] <8.5% Output ripple 7 Vp-p Cout = 1000 µF, 600 W Inrush current 20 A peak No external circuitry Hold-up capacitance 500 – 3,000 µF Power dependent Isolation voltage Input to output None Provided by DC-DC converters Input / output to baseplate 1,500 Vrms Auxiliary output 19 – 23 Vdc @ ≤3 mA Thermal shut down 90 to 100°C baseplate Short-circuit protection Yes Weight 6 oz (170 g) [b] With sinusoidal input voltage ITHD – VTHD = THD Typical Configuration Not for design use; see data sheet for more information +Out +In +Out V375 30205 Pok Gate In +S VI-HAM-CL E/O VI-26X T LOAD Line Filter Gate Out A/S VI-J6X -S -Out -In -Out 18 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

AC-DC Front-ends Web ExpressCode: pfcfrontend PFC FrontEnd 384 V Output RoHS The PFC FrontEnd from Westcor is a low-profile, 1 RU enclosed chassis- mount AC front end that may be used with any 375 Vin Vicor module, VIPAC Array, BCM, or other module to create a complete, high-density AC-DC power supply. Accepting universal input voltages of 85 –264 Vac, and 100 –380 Vdc, the PFC FrontEnd can deliver up to 2,200 Watts from four non-isolated outputs. With an extremely compact package size of 1.72"x 6.4"x 7" (43,6 x 162,6 x 177,8 mm), the PFC FrontEnd can provide >28 W/in3. Besides meeting the UL, cTÜVus and CE Marked safety agency approvals, the PFC FrontEnd complies with harmonic current limits per EN61000-3-2, Electrical Fast Transient / burst EN61000-4-5. It also meets MIL-STD-810E for vibration. Features Part Number (cid:2) Power Factor Corrected (PFC) (cid:2) Output voltage: 384 V F E 3 7 5-1 (cid:2) Low profile: 1.72" (43,6 mm) (cid:2) Integral cooling fans (cid:2) Output power: Up to 2,200 Watts (cid:2) Meets MIL-STD-810E for vibration (cid:2) High power density (cid:2) DIN rail mountable (cid:2) Up to four non-isolated outputs (cid:2) Safety agency approvals: cTÜVus, CE Marked General Performance Refer to data sheet for detailed specifications Product Dimensions Input Voltage Output Power Number of Outputs 85 – 264 Vac 2,200 W @ 230 Vac 4 (non-isolated) 1.72" x 6.4" x 7" PFC FrontEnd 47 – 800 Hz (43,6 x 162,6 x 177,8 mm) 100 – 380 Vdc 1,100 W @ 115 Vac Typical Configuration With VIPAC Array; see data sheet for more information MBJ5 EXTERNAL HUB PIN FUNCTION MBJ5 4 N/C 2 4 3 N/C OPTIONAL EXTERNAL HUB 1 3 2 375 V COM 1 375 Vdc P3 J1 J1 10 20 PIN FUNCTION 10 20 CBJx CBJx P1 9 9 1-4 -V IN 9 9 1 OF 4 PIN FUNCTION 8 8 5-7 +V IN 8 8 3 3 N/C 3 7 7 8 NC/PR 7 7 6 6 9 PE 6 6 VIPAC PFC F/E 21 21 1144 VVd CcOM 21 VIAPDAACP ATRORRAY 45 45 1114--111037 --+RVV E IINMNOTE 45 45 ARRAY 3 3 18 NC/PR 3 3 P/E 2 2 19 PE 2 2 20 +REMOTE 1 1 1 1 MBJx MBJx P2 1 OF 4 PIN FUNCTION 4 4 DISABLE 4 3 3 375 V COM 3 2 2 2 N/C 1 1 1 375 Vdc U.S. & CANADA: 800-735-6200 VICORPOWER.COM 19 Consult back cover for a complete list of contacts.

AC-DC Front-ends Web ExpressCode: aim AIM AC Input Module RoHS The AIM (Alternating Input Module) is an AC front-end module which interfaces directly with worldwide AC mains. The AIM provides line rectification, EMI/RFI filtering, transient protection, and inrush limiting in a half-brick package measuring 2.28" x 2.4" x 0.5"(57,9 x 61,0 x 12,7 mm). The AIM is used in conjunction with Vicor VI-200 or VI-J00 DC-DC converters to realize a universal AC input, high-density, low-profile switching power supply with outputs from 1 – 95 Vdc and a total power rating up to 200 W. An external capacitor is used to satisfy system hold-up requirements.Internal EMI filtering meets EN55022 and FCC Part 15, Class A emissions limits. MIL-COTS Version Available Features Page 35 (cid:2) Universal input: 85 –264 Vac (cid:2) Output power: 250 W Part Numbering Ordering, see back cover for contacts (cid:2) Operating temperature up to V I - A I M - E 1 100˚C baseplate (no derating) (cid:2) Efficiency: 97% (cid:2) Integral EMI filtering Family Product Product Grade AC Input Module (cid:2) Input transient protection VI =Non-RoHS E = –10°C to +85°C VE=RoHS C = –25°C to +85°C (cid:2) Inrush limiting I = –40°C to +85°C M = –55°C to +85°C (cid:2) cULus, cTÜVus, CE Marked General Performance Refer to data sheet for detailed specifications Parameter Specifications Notes 85 –264 Vac No strapping AC line input 47 –440 Hz No damage below low line Output power Up to 250 W Efficiency 97% Power factor 0.62 Inrush current <40 A peak No external circuitry Hold-up capacitance 270 – 1,200 µF Power dependent Isolation voltage Input to output None Provided by DC-DC converters Input / output to baseplate 1,500 Vrms Short-circuit protection No Weight 3 oz (85 g) Typical Configuration Not for design use; see data sheet for more information L1 +Out +In +Out N/C Gate In Gate +S In Vicor DC-DC 85 – 264 Vac Parallel Gate Converter Trim Load N/C Gate Out -S Out -Out -In -Out L2/N VI-AIM 20 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

AC-DC Front-ends Web ExpressCode: arm Autoranging Rectifier Module ARM RoHS The Autoranging Rectifier Module (ARM)is the front end of a switching power supply and uses a microprocessor to control strapping of the voltage doubler. The user only needs to add an input filter, hold-up capacitor and appropriate DC-DC converters to realize an autoranging, high-density, low-profile switching power supply. Part Numbering Ordering, see back cover for contacts Features (cid:2) Efficiency: 96 – 98% V I - A R M - C 1 2 3 (cid:2) Operating temperature: Up to 100˚C baseplate (no derating) Product Product Grade Type Pin Style Baseplate BBllaannkk == E = –10 to +100°C 11 == 1 = Short Blank = Slotted (cid:2) Agency approvals: cTÜVus, cULus, CE Marked 550000WW // 775500WW[[aa]] C= –20 to +100°C 550000 WW // 775500 WW 2 = Long 2 = Threaded (cid:2) AC Bus OK, module enable 775500WW // BB11 ,,==55 0 000WW [[bb]] MHT === –––544500 tttooo +++111000000°°°CCC [[cc]] 775500 WW 22// 11==,, 550000 WW SNF === SSLhhooonrrgtt RMMoooHddSuuMMaattee 3 = Through hole (cid:2) Inrush limiting (no external circuitry) G = Long RoHS (cid:2) Autoranging input: 90 – 132 / 180 – 264 Vac [a]Valid combination withType 1only [b]Valid combination with Type 2only [c]T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C Web ExpressCode: farm Filter / Autoranging Rectifier Module FARM RoHS TheFARM (Filter/Autoranging Rectifier Module) is an AC front-end modulewhich provides EMI filtering, Part Numbering Ordering, see back cover for contacts autoranging line rectification, transient protection, and inrush current limiting. F A R M 1 C 1 1 Product Type Product Grade Pin Style Baseplate 1 =500 W / 750 W E= –10 to +100°C 1 = Short 1 = Slotted 2 =750 W / 1,000 W C= –20 to +100°C 2 = Long 2 = Threaded T= –40 to +100°C [d] S = Short ModuMate 3 = Through hole H= –40 to +100°C [d] N = Long ModuMate F = Short RoHS G = Long RoHS [d]T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C General Performance for ARM & FARM Refer to data sheet for detailed specifications Parameter ARM-( )12 ARMB-( )22 FARM1( )21 FARM2( )21 90 – 132 Vac 90 – 132 Vac Input voltage 180 – 264 Vac 180 – 264 Vac Input frequency (C & E-Grade) 47 – 63 Hz 47 – 63 Hz Input frequency (T & H-Grade) 47 – 880 Hz 47 – 880 Hz Output power 115 Vac input 500 Watts 750 Watts 500 Watts 750 Watts 230 Vac input 750 Watts 1,500 Watts 750 Watts 1,000 Watts Compatible DC-DC converter 26x, J6x, V300 26x, J6x, V300 Efficiency (typical) 97% 96% Inrush current (peak line. Cold start) <30 A @ 264 Vac <60 A @264 Vac <30 A @ 264 Vac <60 A @264 Vac Dielectric withstand: Input/output Provided by DC-DC converters Provided by DC-DC converters I/O to baseplate 1,500 Vrms 1,500 Vrms Package Micro Mini Dimensions 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) Operating temperature (C-Grade) –20 to +100°C –20 to +100°C Operating temperature (T-Grade) –40 to +100°C –40 to +100°C Weight 2.1 oz (60 g) 3.1 oz (87.9 g) U.S. & CANADA: 800-735-6200 VICORPOWER.COM 21 Consult back cover for a complete list of contacts.

AC-DC Front-ends Web ExpressCode: enmods ENMods Modular AC Front-end System RoHS The ENMod system is an AC front-end solution providing compliance to electromagnetic compatibility (EMC) standards. It consists of the MiniHAM passive harmonic attenuation module and the FARM3 autoranging AC-DC front-end module. Combined with filtering and hold-up capacitors, the ENMod system provides full compliance to EN61000-3-2 Harmonic Current, EN55022, Level B Conducted Emissions, EN61000-4-5Surge Immunity, EN61000-4-11 Line Disturbances, and EN61000-3-3 Inrush Current. Unlike active PFC solutions, the MiniHAM generates no EMI, greatly simplifying and reducing system noise filtering requirements. It is also smaller and more efficient than active alternatives. Optimized for operation on the DC bus (provided by the FARM3)rather than directly on the AC line, it will provide harmonic current compliance at up to 600 W of input power at 230 Vac. The FARM3 is a filter and autoranging module that has been optimized for use as the front end for the MiniHAM. Both modules are in Vicor’s standard Mini half-brick package. Features Part Numbering Ordering, see back cover for contacts (cid:2) Passive harmonic current E N 1 C 1 1 attenuation to EN61000-3-2 (cid:2) 575 W rated power output (cid:2) Autoranging 115/230 Vac Input Product Type[a] EPr=o d–u1c0t tGo r+a1d0e0 (°C) 1 = SPhionr tStyle [b] 1 = BSalostetepdlate (cid:2) Inrush current limiting CT== ––2400 ttoo ++110000 [c] 2S == SLohnogrt ModuMate 23 == TThhrroeaudgehd hole N = Long ModuMate H= –40 to +100 [c] F = Short RoHS G = Long RoHS [a] EN1 product includes one each MiniHAM and FARM3, same product grade, pin and baseplate style. [b] Pin styles S & N are compatible with ModuMate interconnect systems for socketing and surface mounting. [c] T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C General Performance Refer to data sheet for detailed specifications Parameter Specification Notes 90 – 132 Vac Autoranging (doubler-mode) Operating input voltage 180 – 264 Vac Autoranging (bridge-mode) Output power (max) 575 Watts Harmonic currents EN61000-3-2 50 – 600 W, 230 Vac input 2 kV – 50 µs line to earth Transient surge immunity EN61000-4-5 1 kV – 50 µs line to line Conducted emissions EN55022, Class B Safety EN60950 Dimensions MiniHAM 2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm) FARM3 2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm) Typical Configuration Not for design use; see data sheet for more information N + N/+ N/+ +In + EMI GND BOK NC MINI NC PC (Gate In) Vicor 300 Vin FARM3 ST HAM NC DC-DC Load SR EN NC NC PR (Gate Out) Converter L – L/– L/– –In – 22 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC BRICKS Web ExpressCode: batmod BatMod Battery Charger RoHS The fully-programmable BatMod current source module is based on the VI-200 Series of DC-DC converters. It accepts 48, 150, or 300 V inputs, provides programmable output current, and is well-suited for such applications as battery chargers, metal platers, and laser diodes. The BatMod is compatible with all major battery types, and is available in booster versions for higher output current applications. Features (cid:2) Input voltages: 48, 150 or 300 V (cid:2) Programmable output current (cid:2) Booster versions for higher output current applications (cid:2) Agency approvals: cULus, cTÜVus, CE Marked Part Numbering Ordering, see back cover for contacts (cid:2) Dimensions: V I - 2 6 1 - E U - B M 4.6" x 2.4" x 0.5" (116,9 x 61,0 x 12,7 mm) Family Module Input Voltage Output Voltage Product Grade VI = Non-RoHS 2 = Driver Nominal Range Nominal Range E =–10 to +85°C VE = RoHS B = Booster 3 = 48 V 42– 60 V 1 = 12 V 11.25 – 16.5V C = –25 to +85°C 5 = 150 V 100 – 200 V 3 = 24 V[a] 22.5 – 33.0V I = –40 to +85°C 6 = 300 V 200 – 400 V 4 = 48 V 45.0 – 66.0V M = –55 to +85°C [a] Available in 300 V input only. Packaging Options Chassis-mount housing VI-200 & VI-J00 Series, page 33 SlimMod FinMod BusMod Flangeless package Flangeless package with integral heat sink Chassis mount housing with screw / lug wiring interface 2.28"L x 1.80"W x 0.50"H Longitudinal, 0.25" fins — add suffix “–F1” 2.28"L x 2.40"W x 1.08"H (57,9 x 45,7 x 12,7 mm) Longitudinal, 0.50" fins — add suffix “–F2” (57,9 x 61,0 x 27,4 mm) 4.60"L x 1.80"W x 0.50"H Transverse, 0.25" fins — add suffix “–F3” 4.60"L x 2.40"W x 1.08"H (116,8 x 45,7 x 12,7 mm) Transverse, 0.50" fins — add suffix “–F4” (116,8 x 61,0 x 27,4 mm) To order the SlimMod configuration add Available with longitudinal or transverse fins of 0.25" or 0.50" height. Add To order the BusMod fully assembled, add the suffix “–S” to the standard module the appropriate suffix to the module part number as shown on Page 13. suffix “–B1” to the standard module part part number as shown on Page 13. number as shown on Page 13. To order the BusMod separately: Half-sized BusMod — P/N 18952 Full-sized BusMod — P/N 06322 U.S. & CANADA: 800-735-6200 VICORPOWER.COM 23 Consult back cover for a complete list of contacts.

DC-DC Filters Web ExpressCode: fiam FIAM Filter Input Attenuator Module RoHS A DC input, front-end module providing transient protection, inrush current limiting and EMI filtering. The FIAM enables designers using Vicor Maxi, Mini, and Micro 48 Vin DC-DC converters to meet the transient immunity and EMI requirements of Telcordia, FCC, ETSI and European Norms. Features MIL-COTS Version (cid:2) EMI filtering - Class A Available (cid:2) Inrush current limiting Page 36 (cid:2) Transient protection (cid:2) Input: 36 – 76 Vdc (cid:2) 10 and 20 Amp versions (cid:2) Agency approvals: cULus, cTÜVus, CE Marked General Performance Not for design use; see data sheet Part Numbering Ordering, see back cover for contacts Parameter Specification Input voltage 36 –76 Vdc F I A M 1 C 1 1 Output current FIAM1xxx / FIAM2xxx 10 A / 20 A Inrush limiting 0.014 Amp/µF Product Type Product Grade Pin Style Baseplate 1 = 10 A C= –20 to +100°C 1 = Short 1 = Slotted Telcordia GR-1089-Core Issue 2, 2 = 20 A T= –40 to +100°C [a] 2 = Long 2 = Threaded EMI/ RFI H= –40 to +100°C [a] S = Short ModuMate 3 = Through hole EN55022, Class A, FCC Part 15, Class B N = Long ModuMate F = Short RoHS Telcordia GR-499-Core, Section 13-2, G = Long RoHS Transient immunity ETS 300 386-1, Class 2 [a] T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C Mini package 2.28" x 2.2" x 0.5" dimensions (57,9 x 55,9 x 12,7 mm) Web ExpressCode: iam Input Attenuator Module IAM RoHS The IAM provides EMI filtering and transient protection for industrial and communications applications, using VI-200 and VI-J00 Series modules. Features (cid:2) Meets Telcordia & British Telecom standards for EMI/RFI (cid:2) Meets Telcordia, IEC and British Telecom standards for transients (cid:2) Agency approvals: cULus, cTÜVus, CE Marked (cid:2) Efficiency: 97% MIL-COTS Version Available (cid:2) Input reverse polarity protection Page 36 (cid:2) Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) IAM Models & General Performance Input Voltage Output Model Min. Typ. Max. Power VI-A11-CU 21 Vdc 24 Vdc 32 Vdc 200 W VI-AWW-CU 18 Vdc 24 Vdc 36 Vdc 200 W VI-A33-CQ 42 Vdc 48 Vdc 60 Vdc 400 W VI-ANN-CQ 36 Vdc 48 Vdc 76 Vdc 400 W VI-A66-CQ 200 Vdc 300 Vdc 400 Vdc 400 W RoHS compliant versions begin with “VE-”. For example: VE-A33-CQ 24 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC Filters Web ExpressCode: ram RAM Ripple Attenuator Module Combining active and passive filtering, the RAM attenuates both low-frequency input power source fundamental and harmonics, and high-frequency switching components in the frequency range of DC to 20 MHz, while exhibiting efficiencies of 93 – 99%. No adjustments are required, and remote sense and output voltage trim features are retained. Features (cid:2) Reduces output ripple to <3 mV pp (VI-200) (cid:2) Compatible with VI-200 / VI-J00 based products: 5 –50 Vdc output (cid:2) Full attenuation up to 20 A (cid:2) No adjustments required (cid:2) Efficiency: 93 – 99% (cid:2) Converter sense, trim, overvoltage, and overcurrent retained (cid:2) Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) (cid:2) CE Marked Input to VI-RAM Low Noise Output Typical Configuration Not for design use; see data sheet Part Numbering Ordering, see back cover for contacts V I - R A M - C 2 + In + Out + In + Out Gate In VI-200 T+ri mS + S IVnI-RAM+ S NO/uCt Load Gate Out – S – S In – S Out Family Product Product Grade Type – In – Out – In – Out VI =Non-RoHS E = –10 to +100°C 1 = Up to 10 Amps VE=RoHS C= –25 to +100°C 2 = Up to 20 Amps I = –40 to +100°C M= –55 to +100°C Web ExpressCode: uram Output Ripple Attenuator Module MicroRAM RoHS Combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. Features (cid:2) Integrated ORing diode supports N+1 redundancy (cid:2) >40 dB ripple attenuation from 60 Hz to 1 MHz (cid:2) Significantly improves load transient response (cid:2) Reduces ripple to less than 10 mV peak to peak (cid:2) Efficiency: Up to 98% MIL-COTS Version Available (cid:2) 20 and 30 Amp ratings Page 36 (cid:2) 3 – 30 Vdc input range (cid:2) Dimensions: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) Part Numbering Ordering, see back cover for contacts (cid:2) Compatible with Vicor’s DC-DC converters µ R A M 2 C 2 1 Typical Configuration Not for design use; see data sheet RSENSE Product Type Product Grade (°C) Pin Style Baseplate +IN +OUT 5.1 23 == 2300 AAmmppss CT == ––2400 ttoo ++110000[a] 12 == SLohnogrt 12 == STlhortetaedded PPCR CoDnCv-eDrCter S+–CSS CTRA22N *F +SC–IICTNNRAN +–OOVUUreTTf CHR* RHR LOAD MH == ––5450 ttoo ++110000[a] SNFG ==== SSLLhhoooonnrrggtt RMMRooooHHddSSuuMMaattee 3 = Thhorloeugh –IN –OUT [a]T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C *Optional Component U.S. & CANADA: 800-735-6200 VICORPOWER.COM 25 Consult back cover for a complete list of contacts.

Active Filters QPI Family Web ExpressCode: qpi QPI-3LZ through QPI-12LZ Active EMI Filters RoHS The QPI family of active EMI filters provides conducted common-mode (CM) and differential- mode (DM) attenuation from 150 kHz to 30 MHz (CISPR22 range). The proprietary active filtering circuit provides superior attenuation at low frequencies intended to support EN Class B limits, including PICMG®3.0 for ATCA. Models QPI-3LZ through QPI-8LZ are designed to work with most switch-mode power supplies. The QPI-9LZ through QPI-12LZ products are designedspecifically for use with Vicor’s V(cid:129)I Chip power conversion products. The QPI series are SiP (System-in-Package) solutions with Land Grid Array (LGA) mounting. The QPI-3LZ through QPI-10LZ are full size 25 x 25 x 4,5 mm packages and the QPI-11LZ and QPI- 12LZ are half-size 12,5 x 25 x 4,5 mm packages. The QPI series is also available in an open Patents Pending frame SiP platform by ordering with the “-01” suffix. Features (cid:2) 24/28 V and 48/60 V models QPI Evaluation Boards (cid:2) Efficiency: >99% at full load (cid:2) Supports PICMG®3.0 ATCA requirements Available pg. 47 (cid:2) High density, low profile (cid:2) Compatible with most DC-DC converters For more information, surface mount LGA package (cid:2) –40ºC to +100ºC PCB temperature go to picorpower.com (cid:2) Integrated Hot-Swap in selected models (cid:2) TU˙˙V approved Part Numbering Part Number Input Nominal Current CM Attenuation DM Attenuation Hipot Hot-Swap (-01 = Open Frame)[a] Voltage Range Rating @ 250 kHz @ 250 kHz QPI-3LZ 24/28 Vdc 10 – 40 Vdc 7 A 60 dB 80 dB 707 Vdc N/A QPI-3LZ-01 24/28 Vdc 10 – 40 Vdc 7 A 60 dB 80 dB 707 Vdc N/A QPI-4LZ 48/60 Vdc 30 – 80 Vdc 7 A 40 dB 70 dB 1,500 Vdc N/A QPI-4LZ-01 48/60 Vdc 30 – 80 Vdc 7 A 40 dB 70 dB 1,500 Vdc N/A QPI-5LZ 24/28 Vdc 10 – 40 Vdc 14 A 60 dB 80 dB 707 Vdc N/A QPI-5LZ-01 24/28 Vdc 10 – 40 Vdc 14 A 60 dB 80 dB 707 Vdc N/A QPI-6LZ 48/60 Vdc 30 – 80 Vdc 14 A 40 dB 80 dB 1,500 Vdc N/A QPI-6LZ-01 48/60 Vdc 30 – 80 Vdc 14 A 40 dB 80 dB 1,500 Vdc N/A QPI-7LZ 24/28 Vdc 18 – 38 Vdc 6 A 50 dB 80 dB 707 Vdc Yes QPI-7LZ-01 24/28 Vdc 18 – 38 Vdc 6 A 50 dB 80 dB 707 Vdc Yes QPI-8LZ 48/60 Vdc 32 – 76 Vdc 6 A 40 dB 70 dB 1,500 Vdc Yes QPI-8LZ-01 48/60 Vdc 32 – 76 Vdc 6 A 40 dB 70 dB 1,500 Vdc Yes V(cid:129)I Chip Specific Models @ 1 MHz @ 1 MHz QPI-9LZ 24/28 Vdc 18 – 38 Vdc 6 A 65 dB 80 dB 707 Vdc Yes QPI-9LZ-01 24/28 Vdc 18 – 38 Vdc 6 A 65 dB 80 dB 707 Vdc Yes QPI-10LZ 48/60 Vdc 32 – 76 Vdc 6 A 45 dB 70 dB 1,500 Vdc Yes QPI-10LZ-01 48/60 Vdc 32 – 76 Vdc 6 A 45 dB 70 dB 1,500 Vdc Yes QPI-11LZ 24/28 Vdc 5 – 50 Vdc 7 A [b] 65 dB 80 dB 707 Vdc N/A QPI-11LZ-01 24/28 Vdc 5 – 50 Vdc 7 A [b] 65 dB 80 dB 707 Vdc N/A QPI-12 LZ 48/60 Vdc 10 – 80 Vdc 7 A [b] 45 dB 70 dB 1,500 Vdc N/A QPI-12 LZ-01 48/60 Vdc 10 – 80 Vdc 7 A [b] 45 dB 70 dB 1,500 Vdc N/A [a]Open-frame units are compatible with aqueous cleaning processes. [b]Parallelable for up to 12 A. Typical Configuration Not for design use; see data sheet Performance Models QPI-3LZ through QPI-8LZ CR Class B Limit 10 Ω, 1/4 W 26 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Conducted EMI scans showing QPI performance. Blue trace = no QPI; Red trace = with QPI. Consult back cover for a complete list of contacts.

Active Filters QPO Family Web ExpressCode: qpo QPO-1LZ / QPO-2LZ Output Ripple Attenuator RoHS The QPO output ripple attenuator products use proprietary active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 kHz. QPOs improve transient response and ensure quiet point-of-load regulation. They also reduce the number of output capacitors to support dynamic loads. QPOs work with most DC-DC converters and switching power supplies. Output regulation is maintained using remote sensing or the trim input of the power supply. Features (cid:2) >30 dB PARD attenuation, 1 kHz to 500 kHz (cid:2) Supports precise point-of-load regulation (cid:2) Efficiency: Up to 99% (cid:2) High density, low profile LGA package Patents Pending (cid:2) Reduces required number of output capacitors to support dynamic loads (cid:2) User selectable optimization of attenuation, power dissipation, and transient load response (cid:2) Compatible with most DC-DC converters Part Numbering Part Number Input Voltage Current Rating Attenuation (-01 = Open Frame)[a] QPO-1LZ 3 – 30 Vdc 10 A > 30 dB PARD attenuation, 1 kHz to 500 kHz QPO-1LZ-01 3 – 30 Vdc 10 A > 30 dB PARD attenuation, 1 kHz to 500 kHz QPO-2LZ 0.3 – 5.5 Vdc 20 A > 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased QPO-2LZ-01 0.3 – 5.5 Vdc 20 A > 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased [a]Open-frame units are compatible with aqueous cleaning processes. Typical Application Performance LOAD+ VOUT+ QPO IN QPO OUT QPO IN (AC) SENSE+ Rsc Cout RSL QPO-1LZSC SET SC SC CESR GND VREF REFGND QPO OUT (AC) CSC RHR SENSE- LOAD CURRENT VOUT- (DC) 5A/DIV LOAD- QPO Evaluation Boards Available pg. 47 For more information, go to picorpower.com U.S. & CANADA: 800-735-6200 VICORPOWER.COM 27 Consult back cover for a complete list of contacts.

AC-DC Configurable Power Supplies Web ExpressCode:flatpac FlatPAC Family 50 –600 Watt Power System RoHS The FlatPAC is a complete, low-profile, agency-approved switching power supply. It combines Vicor’s VI-200 Series of DC-DC converters and front- end subassemblies to provide from 50 –600 W of output power from one to three outputs. The FlatPAC design provides rapid turnaround on standard models. FlatPAC is available with BatMod current source module, Page 23. Features (cid:2) Microprocessor-controlled front end (cid:2) Finned or conduction-cooled package (cid:2) Inputs: 115/230 Vac, autoranging (cid:2) 22 Standard output voltages from 1 – 95 Vdc (cid:2) FCC Part 15, Class B, EN55022, Class B (cid:2) Low-noise ZCS / ZVS power topology (cid:2) 40 ms hold up (cid:2) Transient surge: EN61000-4-5 (cid:2) Agency approvals: (cid:2) Low profile only 1.37” (34,7 mm) cULus, cTÜVus, CE Marked (cid:2) Custom output voltages also available (cid:2) Module disable (cid:2) BatMod current-source option available (cid:2) BUS OK and AC OK Chassis Configurations General Performance Refer to data sheet for specifications (cid:2) Single output Parameter Specification (cid:2) 50 – 200 Watts (cid:2) 9.25” x 2.5” x 1.37” Number of outputs 1 to 3 (234,8 x 63,5 x 34,8 mm) Output power Up to 600 W 90 – 132 Vac / 180 – 264 Vac OUTPUT 1 Input voltage 47 – 63 Hz (400 Hz available; contact factory) (cid:2) Single or dual outputs Conducted EMI EN/FCC “B” (cid:2) 100 – 400 Watts Set point ±1% max. (E-Grade 2%) (cid:2) 9.25” x 4.9” x 1.37” Load / line regulation 0.2% max. (E-Grade 0.5%) (234,8 x 124,5 x 34,8 mm) Output ripple (pp) 150 mV or 3% max. (E-Grade 5%) Trim range [a] 50 – 110% OUTPUT 1 Remote sense range 0.5 Vdc max. (cid:2) Single, dual OVP set point 125% typical or triple outputs Current limit 115% (cid:2) 150 – 600 Watts Maximum temperature 0 to 85°C baseplate (cid:2) 9.25” x 7.3” x 1.37” [a]10, 12 and 15 V outputs, standard trim range ± 10%. (234,8 x 185,4 x 34,8 mm) Consult factory for wider trim range. OUTPUT 1 Part Numbering V I - M U 3 - C Q (VE) = RoHS Compliant Family Input Out 1 Out 2 [b] Out 3 [c] Grade Power 1 Power 2 [b] Power 3 [c] L = Single U =Autoranging Z = 2 V M = 10 V K = 40 V E = 0°C M = 600 W U = 200 W U = 200 W M = Single 90 – 132 and Y =3.3 V 1 = 12 V 4 =48 V C = 0°C P =450 W V =150 W V =150 W N = Single 180 – 264 Vac 0 = 5 V P = 13.8 V H = 52 V I = –30°C Q = 400 W W =100 W W =100 W P =Dual X =5.2 V 2= 15 V F =72 V S =300 W X =75 W X =75 W Q =Dual W=5.5 V N= 18.5 V D =85 V U =200 W Y =50 W Y =50 W R =Triple V =5.8 V 3= 24 V B =95 V V =150 W T =6.5 V L= 28 V W=100 W R =7.5 V J = 36 V X =75 W Y =50 W All voltages available for output 1, 2, or 3 For conduction-cooled package add –CC to the part number. For example, VI–LU0–CV–CC. [b] For P, Q, R, PJ, and RJ only. Refer to output configuration chart above. [c] For R and RJ only. Refer to output configuration chart above. 28 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

AC-DC Configurable Power Supplies Web ExpressCode:pfcflatpac PFC FlatPAC Single Output Power System RoHS The PFC FlatPAC uses Vicor’s field-proven VI-HAM and Maxi DC-DC converters to deliver up to 575 watts of clean, reliable power. The PFC FlatPAC is a single-output power supply available with standard output voltages from 3.3 – 54 Vdc. It operates from an input of 85 –264 Vac, includes active power factor correction (0.99 power factor), and meets EN61000-3-2 harmonic current limits. Internal filtering provides compliance to EN55022-A conducted EMI. It is available in Vicor’s low profile 1.37" (34,8 mm) FlatPAC chassis, in either finned or conduction-cooled (CC) versions. Features (cid:2) Input: 85 – 264 Vac (cid:2) Safety agency approvals: cULus, cTÜVus, CE Marked (cid:2) Power factor: 0.99 (cid:2) Single output: Up to 80 A (cid:2) High efficiency or 575 W, 3.3 – 54 Vdc (cid:2) Remote sense (cid:2) Low profile package: (cid:2) Current limit 1.37" x 4.9" x 9.25" (cid:2) Thermal shut down (34,8 x 124,4 x 235 mm) (cid:2) OVP General Performance Refer to data sheet for detailed specifications Parameter Rating Unit Notes Input Voltage 85 – 264 Vac 47 – 63 Hz Frequency 47 – 440 Hz I-Grade Regulation line / load 0.5 % 10 to 100% load Mechanical Weight 44.8 (1,304) oz (g) 1.37 x 4.9 x 9.25 inches Dimensions 24,8 x 1,244 x 235 mm Operating temperature (case) C-Grade and E-Grade 0 to +85 ˚C I-Grade –30 to +85 ˚C Storage temperature (case) E-Grade –10 to +100 ˚C C-Grade –30 to +100 ˚C I-Grade –55 to +100 ˚C Part Numbering Ordering, see back cover for contacts V I - C M U 3 - C M - (VE) = RoHS Compliant Input Output Voltage Product Grade (°C) Output Power Options Universal Y = 3.3 V 3= 24 V E = 0 to 85°C case Vout = ≤5 V Vout≥12 V -CC = Conduction Cooled 85 – 264 Vac 0 = 5.0 V L = 28 V C = 0 to 85°C case Q = 80 A M = 575 W 1= 12 V J = 36 V I = –30 to 85°C case 2= 15 V 4= 48 V G= 54 V U.S. & CANADA: 800-735-6200 VICORPOWER.COM 29 Consult back cover for a complete list of contacts.

AC-DC Configurable Power Supplies Web ExpressCode:vipac VIPAC Power System Choice of Chassis Configurations RoHS The VIPAC is an integrated power system leveraging the latest advances in DC-DC converter technology and modular front ends. VIPAC combines application-specific power processing units (PPU), a choice of chassis styles and remotely located hold-up capacitors to provide fast, flexible, and highly reliable power solutions for a wide range of demanding applications. The PPU is the core element of the system and incorporates Vicor’s autoranging FARM modular front end to provide transient protection, EMI filtering, and inrush current limiting. The PowerBench VIPAC Design Center enables designers to configure the PPU with up to three independently regulated outputs having power levels from 50 –500 W and with as much as 900 W total output power. RoHS-compliant versions can be selected with the VIPAC Design Tool. Features (cid:2) AC input: 115/230 Vac autoranging, (cid:2) Choice of output terminations: 47 – 440 Hz LugMate or PlugMate (cid:2) Output voltages: 2 – 48 Vdc (cid:2) Local or remote control 50 – 900 Wattstotal; Configure Your VIPAC Power 1, 2, or 3 outputs (cid:2) Package style: System Online Low-profile coldplate (cid:2) Protective features: Optional finned heat sink PO ERBENCH Inrush current limiting (cid:2) Agency approvals: Input transient protection vicorpower.com/vcad cULus, cTÜVus, CE Marked EMI filtering Chassis Configurations Dimensions vary with specific model configurations 3 Micros 2 Micros (cid:2) Dual or triple output (cid:2) Single or dual output (cid:2) Up to 450 W (cid:2) Up to 300 W (cid:2) 4.96" x 6.8" x 0.75"[a] (cid:2) 3.15" x 6.8"x 0.75"[a] (126,0 x 172,7 x 19,0 mm) (80,0 x 172,7 x 19,0 mm) 1 Mini (cid:2) Single output 2 Minis (cid:2) Up to 250 W (cid:2) Single or dual output (cid:2) 3.15" x 6.8"x 0.75"[a] (cid:2) Up to 500 W (80,0 x 172,7 x 19,0 mm) (cid:2) 4.96" x 6.8"x 0.75"[a] (126,0 x 172,7 x 19,0 mm) 1 Maxi (cid:2) Single output (cid:2) Up to 500 W (cid:2) 3.15" x 9.15" x 0.75"[a] 2 Maxis (80,0 x 232,4 x 19,0 mm) (cid:2)Single or dual output (cid:2)Up to 900 W 1 Micro (cid:2)4.96" x 9.15"x 0.75"[a] (cid:2) Single output (126,0 x 232,4 x 19,0 mm) (cid:2) Up to 150 W (cid:2) 3.15" x 6.8"x 0.75"[a] (80,0 x 172,7 x 19,0 mm) [a]PlugMate version is 0.81" (20,5 mm) in height 30 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC Configurable Power Supplies Web ExpressCode:vipacarray VIPAC Arrays DC Input Power System (cid:129) 1 –4 Outputs RoHS The VIPAC Arrays are a highly flexible system of DC input power building blocks which can be configured with as many as four user-definable outputs on a low-profile, coldplate chassis. Using Vicor’s VCAD design tool (vicorpower.com/vcad), designers are able to specify VIPAC Arrays with inputs of 24, 28, 48, 72, 110, 150, 300, 375 Vdc and outputs from 2 to 54 Vdc at power levels up to 600 watts per output. VIPAC Arrays are ideal for use in distributed and modular power systems where power density and reliable operation are critical. A current share option is available on single output models enablingthem to be used in applications requiring high power / redundancy. Fully connectorized input and output terminations speed system installation and a versatile coldplate chassis simplifies thermal management. Features RoHS-compliant versions can (cid:2) Input voltage: 24, 28, 48, 72, 110, 150, 300 or 375 V MIL-COTS Version be selected with the VIPAC Available Design Tool. (cid:2) Booster versions for higher output current applications Page 37 (cid:2) Agency approvals: cTÜVus, CE Marked (300, 375 Vdc inputs only) Configure Your VIPAC Array Power System Online PO ERBENCH vicorpower.com/vcad Chassis Configurations Dimensions vary with specific model configurations 2 Minis 1 Micro, 2 Minis (cid:2) Single or dual outputs (cid:2) Dual or triple outputs (cid:2) Up to 600 W total (cid:2) Up to 750 W total (cid:2) 3.62" x 6.69"x 0.78"[a] (cid:2) 3.62" x 7.52"x 0.78"[a] (92,0 x 170,0 x 19,8 mm) (92,0 x 191,0 x 19,8 mm) 1 Mini, 2 Micros 4 Micros (cid:2) Single, dual or triple (cid:2) Dual, triple or quad outputs outputs (cid:2) Up to 600 W total (cid:2) Up to 600 W total (cid:2) 3.62" x 6.69"x 0.78"[a] (cid:2) 3.62" x 7.52"x 0.76"[a] (92,0 x 170,0 x 19,8 mm) (92,0 x 191,0 x 19,3 mm) 3 Micros 1 Mini (cid:2) Dual or triple outputs (cid:2) Single output (cid:2) Up to 450 Wtotal (cid:2) Up to 300 W (cid:2) 3.62" x 6.69"x 0.76"[a] (cid:2) Current share option (92,0 x 170,0 x 19,3 mm) (cid:2) 3.62" x 4.39"x 0.78"[a] (92,0 x 112,0 x 19,8 mm) 1 Maxi 2 Micros (cid:2) Single output (cid:2) Single or dual outputs (cid:2) Up to 600 W (cid:2) Up to 300 W total (cid:2) Current share option (cid:2) 3.62" x 4.39"x 0.78"[a] (cid:2) 3.62" x 6.69"x 0.78"[a] (92,0 x 112,0 x 19,8 mm) (92,0 x 170,0 x 19,8 mm) [a]PlugMate version is 0.81" (20,5 mm) in height U.S. & CANADA: 800-735-6200 VICORPOWER.COM 31 Consult back cover for a complete list of contacts.

DC-DC Configurable Power Supplies Web ExpressCode: compac ComPAC Family 50 –600 Watt Input Power System RoHS ComPAC delivers up to 600 W from one, two, or three outputs in a package just 0.99” (25,2 mm) in height with the field proven performance, high efficiency and high reliability inherent in Vicor’s component level power converters. ComPAC meets British Telecom and European Norms for input surge withstand and meets conducted emissions of EN55022, Class B. ComPAC is offered with input voltage ranges optimized for industrial and telecommunication applications and provides extended input over voltage capability, input reverse polarity protection, undervoltage lockout, and master disable. ComPAC is available with BatMod current source Conduction-cooled module, Page 23. models available Features (cid:2) Inputs: 24, 48, and 300 Vdc (cid:2) EN55022, Class B: MIL-COTS Version Conducted emissions (cid:2) Any output: 1 –95 Vdc Available (cid:2) Agency approvals: (cid:2) Input surge withstand: Page 37 British Telecom BTR 2511, cULus, cTÜVus, CE Marked EN61000-4-5 (cid:2) Efficiency: 80 – 90% (cid:2) Low-noise ZCS / ZVS power topology (cid:2) Up to 10 W/ in3 (cid:2) Optional high-performance heat sink (cid:2) EMI / RFI specifications: Chassis Configurations (cid:2) Finned or conduction-cooled Telcordia TR-TSY-000513, package British Telecom BTR 2511 (cid:2) Single output (cid:2) 50 – 200 Watts General Performance Refer to data sheet for specifications (cid:2) 9.25” x 2.5” x 0.99” (234,8 x 63,5 x 25,2 mm) Parameter Designator Rating Unit 1 21 – 32 Vdc W 18 – 36 Vdc (cid:2) Single or dual outputs Input voltage range 3 42 – 60 Vdc (cid:2) 100 – 400 Watts N 36 – 76 Vdc (cid:2) 9.25” x 4.9” x 0.99” 6 200 – 400 Vdc (234,8 x 124,5 x 25,2 mm) Outputs 1, 2 or 3 Output power 50 – 600 Watts Output voltage(s) 1 – 95 Vdc (cid:2) Single, dual, or Operating temperature (case) triple outputs E-Grade –10 to +85 ˚C (cid:2) 150 – 600 Watts C-Grade –25 to +85 ˚C (cid:2) 9.25” x 7.3” x 0.99” I-Grade –40 to +85 ˚C (234,8 x 185,4 x 25,2 mm) M-Grade –55 to +85 ˚C Part Numbering V I - N C 3 4 - C M (VE) = RoHS Family Input Out 1 Out 2 [a] Out 3 [b] Grade Power 1 Power 2 [a] Power 3 [b] Compliant L = Single 1 = 24 V [c] Z = 2 V M = 10 V K = 40 V E = –10°C M = 600 W U = 200 W U = 200 W M = Single W = 24 V Y =3.3 V 1 = 12 V 4 =48 V C = –25°C P =450 W V =150 W V =150 W N = Single 3 = 48 V 0 = 5 V P = 13.8 V H = 52 V I = –40°C Q = 400 W W =100 W W =100 W P =Dual N = 48 V X =5.2 V 2= 15 V F =72 V M=–55°C S =300 W X =75 W X =75 W Q =Dual 6 = 300 V W=5.5 V N= 18.5 V D =85 V U =200 W Y =50 W Y =50 W R =Triple V =5.8 V 3= 24 V B =95 V V =150 W [a]For P, Q, R, PJ, and RJ only. Refer to T =6.5 V L= 28 V W=100 W output configuration chart. R =7.5 V J = 36 V X =75 W [b]For R and RJ only. Refer to output Y =50 W configuration chart . All voltages available for output 1, 2, or 3 [c]Max output power / module 150 W. Note:For conduction-cooled package add –CC to the part number. For example, VI–LWX–CV–CC. 32 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

DC-DC Configurable Power Supplies Web ExpressCode:megamod MegaMod Family Chassis–Mount VI-200 / VI-J00 Converters RoHS MegaMod and MegaMod Jr. DC-DC converters incorporate one, two, or three Vicor VI-200 or VI-J00 converters in a modular package to provide a chassis-mounted alternative to board-mounted power supplies. MegaMods offer 50 – 600 W of power from 1– 3 outputs. MegaMod Jrs. offer a total of 25 – 300 W from 1– 3 outputs. Each output may be independently sensed, adjusted, and sequenced using the procedures outlined for VI-200 and VI-J00 converters in the Vicor Applications Manual. Download a PDF of the manual from the library section of vicorpower.com. Features (cid:2) Inputs: 10 –400 Vdc (cid:2) Low noise ZCS / ZVS power topology (cid:2) Any output: 1 –95 Vdc (cid:2) Temperature grades (MegaMod Jr.): E = –10 to +85°C (+100°C) MIL-COTS Version (cid:2) Agency approvals: C = –25 to +85°C (+100°C) Available cULus, cTÜVus, CE Marked I = –40 to +85°C (+100°C) Page 37 (cid:2) Efficiency: 80 – 90% (typical) M = –55 to +85°C (+100°C) (cid:2) Up to 27 W/ in3 (cid:2) ZCS power architecture (cid:2) Low profile: 0.62" (15,7 mm) high (cid:2) Booster versions available for expanded output power (MegaMod only) Chassis Configurations Input Selection Package Output Power MegaMod MegaMod Jr. 4.9'' (124,4 mm) 2.58'' (35,5 mm) (cid:2) Single output 12 (cid:2) 50 – 200 Watts — MegaMod: L 18 (632,5.5 m''m) DMCe-gDaCM COoDnTvMerter OUTPUTINPUTS/NMODELMegaMOD Jr. (cid:2) 25 – 100 Watts — MegaMod Jr.: LJ 24 36 DMCe-gDaCM COoDnTvMerter OUTPUTINPUTS/NMODELMegaMOD Jr. 4.9'' (cid:2) Single or dual outputs (124,4 mm) 48 (cid:2) 100 – 400 Watts— MegaMod: M, P 72 (cid:2) 50 – 200 Watts — MegaMod Jr.: PJ 110 DMCe-gDaCM COoDnTvMerter OUTPUTINPUTS/NMODELMegaMOD Jr. 150 7.3'' (cid:2) Single, dual or triple outputs (185,4 mm) 300 (cid:2) 100 – 600 Watts— MegaMod: N, Q, R 150/300 (cid:2) 75 – 300 Watts — MegaMod Jr.: RJ Part Numbering V I - L 1 3 - E V (VE) = RoHS Family Input Voltage Out 1 Out 2 [a] Out 3 [b] Grade Power 1 Power 2 [a] Power 3 [b] Compliant L = Single 0 = 12 (10-20) Z = 2 V M = 10 V K = 40 V E = –10°C M = 600 W U = 200 W U = 200 W M = Single V= 24 (10-36) Y =3.3 V 1 = 12 V 4 =48 V C = –25°C P =450 W V =150 W V =150 W N = Single 1 = 24 (21-32)[c] 0 = 5 V P = 13.8 V H = 52 V I = –40°C Q = 400 W W =100 W W =100 W P =Dual W = 24 (18-36) X =5.2 V 2= 15 V F =72 V M= –55°C S =300 W X =75 W X =75 W Q =Dual 2 = 36 (21-56) W=5.5 V N= 18.5 V D =85 V U =200 W Y =50 W Y =50 W R =Triple 3 = 48 (42-60) V =5.8 V 3= 24 V B =95 V V =150 W Z =25 W Z =25 W LJ = Single N= 48 (36-76) T =6.5 V L = 28 V W=100 W PJ = Dual 4= 72 (55-100) R =7.5 V J = 36 V X =75 W [a]For P, Q, R, PJ, and RJ only. Refer to RJ= Triple T= 110 (66-160) Y =50 W output configuration chart. 5= 150 (100-200) Z =25 W [b]For R and RJ only. Refer to output 6= 300 (200-400) configuration chart. 7= 150(100-375) All voltages available for output 1, 2, or 3 [c]Max output power / module 150 W U.S. & CANADA: 800-735-6200 VICORPOWER.COM 33 Consult back cover for a complete list of contacts.

MIL-COTS V(cid:129) I Chips Web ExpressCode: mvichips DC-DC V(cid:129)I Chip Modules 28 V Regulator, Voltage Transformer, & Bus Converter VTMs put isolated current multiplication and voltage division directly at the point of load (POL), and an upstream PRM (Regulator) controls the factorized bus voltage supplied to the VTM to provide line and load regulation. Together, the PRM and VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package. The BCM (Bus Converter Module) functions as a fixed-ratio DC-DC transformer and provides an isolated bus voltage to power the PRM and VTM chip set or other loads. The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL–STD–1275 and MIL–STD– 704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 – 50 Vdc in a surface-mount package occupying only 1 in2. The MIL-COTS BCM is a high efficiency Sine Amplitude Converter (SAC) operating from a 240 to 330 Vdc primary bus to deliver an isolated 30 – 41.2 V nominal, unregulated secondary. Features for PRM Features for VTM Features for BCM (cid:2) Input range: 16 – 50 Vdc (cid:2) Isolated 1–50 Vdc output (cid:2) Input range: 240 – 330 Vdc (cid:2) 1.3 MHz switching frequency (cid:2) 1 µs transient response (cid:2) Output range: 30.0 – 41.2 Vdc (cid:2) Efficiency: 95% (cid:2) 3 MHz switching frequency (cid:2) MIL-STD-704E/F Compliant (cid:2) –55°C to +125°C operation (Tj) (cid:2) Efficiency: Up to 96.5% (cid:2) Efficiency: >95% (cid:2) ZVS buck-boost regulator (cid:2) –55 to +125°C operation (Tj) (cid:2) –55 to +125°C operation (Tj) Web ExpressCode: mvib MIL-COTS VI BRICKs PRM / VTM Thermally Enhanced Package The PRMRegulator Module is a very efficient non-isolated The thermally enhanced VTMvoltage transformer excels regulator specifically designed to provide a controlled Factorized at speed, density and efficiency to meet the demands of Bus distribution voltage for powering downstream VI BRICK advanced power applications. Combined with the PRM Voltage Transformation Modules. In combination, VI BRICK PRMs regulator they create a DC-DC converter with flexibility to and VTMs form a complete DC-DC converter subsystem offering provide isolation and regulation where needed. The PRM all of the unique benefits of Vicor’s Factorized Power can be located with the VTM at the Architecture (FPA): high density and efficiency; point of load or remotely in the back low noise operation; architectural flexibility; plane or on a daughtercard. extremely fast transient response; elimination of bulk capacitance at the point of load (POL); in a thermally enhanced package. MQPI-18 Input EMI Filter MIL-COTS Product Catalog The MQPI-18 is a surface mount DC front-end This document provides in-depth information on Vicor's line of filter that provides EMI filtering for Vicor’s 28 V MIL-COTS standard products, including DC-DC converters, DC-DC V(cid:129)I Chip or VI BRICK modules. The custom solutions, and technical support. MQPI-18 enables designers to meet conducted (cid:2) Environmental stress screening and MTBF emission / conducted susceptibility per MIL- (cid:2) Environmental qualification STD-461E. The MQPI-18 accepts an input voltage of 10 – 80 Vdc and delivers output (cid:2) Custom configured modules current up to 7 A. (cid:2) Field tested... proven reliability Visit vicorpower.com to view the Military Catalog online. This will give you instant access to all 34 U.S. & CANADA: 800-735-6200 VICORPOWER.COM technical documentation for a MIL-COTS product. Consult back cover for a complete list of contacts.

MIL-COTS BRICKs / Front ends Web ExpressCode: mbricks2 Maxi, Mini & Micro Series DC-DC Converter Modules These high-density DC-DC power converters are available in three rugged packages with output power up to 600 W. Standard inputs of 24, 28, 48, 72, 110, 150, 300, and 375 Vdc; and outputs from 1 –48 Vdc, make these converters extremely flexible for MIL-COTS applications. Features (cid:2) Inputs: 24, 48, 300, and 375 Vdc NEW: 72, 110, 150, and wide input 28 Vdc (cid:2) Two operating temperature ratings: –40 to +100°Cand –55 to +100°C (cid:2) MIL-STD-810 and MIL-STD-202 qualified (cid:2) Environmental stress screening Final test data available at vicorquality.com Web ExpressCode: mbricks1 MI-200 & MI-J00 Series DC-DC Converter Modules Vicor’s field-proven MIL-COTS power components have gained a reputationfor quality and reliability among military power system designers. With thousands of standard models available, designers can rapidly meet performance, schedule, and budget objectives for just about any power solution. Features (cid:2) Inputs per MIL-STD-704D/E/F: 28 and 270 Vdc (cid:2) Input per MIL-STD-1399A: 155 Vdc (cid:2) Output voltages: 2 – 48 Vdc (cid:2) Output power: 10 –100 W (cid:2) MIL-STD-810 and MIL STD-202 qualified (cid:2) NAVMAT component derating guidelines (cid:2) Power density: Up to 25 W/in3 (cid:2) 75 and100 W booster modules available Web ExpressCode: maim MI-AIM AC Front-end Module The MI-AIM works in conjunction with Vicor’s MI-x7x module family and is ideal for systems requiring AC rectification and transient protection. Features (cid:2) 115 Vac nom, 60/400 Hz operation (cid:2) MIL-STD-461D EMI (CE102) @ 60 Hz (cid:2) MIL-STD-704A transient protection (cid:2) MIL-STD-810 and MIL-STD-202 qualified U.S. & CANADA: 800-735-6200 VICORPOWER.COM 35 Consult back cover for a complete list of contacts.

MIL-COTS Filters Web ExpressCode: muram MicroRAM Output Ripple Attenuator Module Vicor’s MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. The MicroRAM operates over a range of 3 –30 Vdc, is available in either 20 or 30 A models, and is compatible with all Vicor DC-DC converters. Features (cid:2) >40 dB ripple attenuation from 60 Hz to 1 MHz (cid:2) 20 and 30 Amp ratings (cid:2) Operation: –55°C (cid:2) Input: 3 – 30 Vdc Web ExpressCode:mfiam M-FIAM Filter Input Attenuator Module The M-FIAM is a DC front-end module that provides EMI filtering and transient protection. The M-FIAM3 and 5B enables designers using Vicor 24 and 300 V Maxi, Mini and Micro DC-DC converters to meet conducted emission / susceptibility per MIL-STD-461E and input transients per MIL-STD-704E/F. The M-FIAM7, compatible with 28 Vdc V(cid:129)I Chip modules, and the M-FIAM9, compatible with Vicor’s V24 and V28 DC-DC converters, are compliant to MIL-STD-461E, MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E. Features M-FIAM3, M-FIAM5B & M-FIAM9 (cid:2) MIL-STD-461E conducted emissions / susceptibility (cid:2) MIL-STD-704E/F transient protection (cid:2) MIL-STD-704A-F & MIL-STD-1275A/B/D transient protection (M-FIAM9) (cid:2) Compatible with 24, 28 & 300 Vdc input Maxi, Mini & Micro DC-DC converters M-FIAM7 (cid:2) MIL-STD-461E conducted emissions / susceptibility (cid:2) MIL-STD-704A-F, MIL-STD-1275A/B/D & DO-160E transient protection (cid:2) Compatible with 28 Vdc V(cid:129)I Chip modules MVA-FIAM5B & MVA-FIAM9 (cid:2) Coldplate connector mounting option for M-FIAM5B and M-FIAM9 Web ExpressCode: miam MI-IAM Input Attenuator Module The MI-IAM provides EMI filtering to MIL-STD-461C/D/E and transient protection to the most severe levels of MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E using MI-200 or MI-J00 DC-DC converters. Features (cid:2) Input: 28 or 270 Vdc (cid:2) MIL-STD-704A-F, MIL-STD-1275A/B/D & DO-160E transient protection (cid:2) MIL-STD-461C/D/E conducted emissions / susceptibility (cid:2) MIL-STD-810 and MIL-STD-202 qualified (cid:2) Compatible with MI-200 and MI-J00 DC-DC converters 36 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

MIL-COTS Configurable Power Supplies Web ExpressCode: mmega MI-MegaMod Family Chassis-Mount DC-DC Converter DC input power converters delivering up to 300 W from one, two, or three outputs in a package just 0.62" in height. Features (cid:2) Standard inputs: 28, 155 & 270 Vdc (cid:2) Power density: Up to 13.5 W/in3 (cid:2) Output voltages: 2 – 48 Vdc (cid:2) 1, 2 or 3 outputs: Up to 300 W Web ExpressCode:mcompac MI-ComPAC DC-DC Configurable Power Supply The MI-ComPAC is a complete single, dual, or triple output DC-DC power supply that delivers up to 300 W from inputs of 28 or 270 Vdc. Features (cid:2) Complete single, dual, or triple output power (cid:2) MIL-STD-461C/D/E conducted supply 50 – 300 W emissions / susceptibility (cid:2) MIL-STD-704A-F, MIL-STD-1275A/B/D (cid:2) Conduction-cooled models available & DO-160E transient protection Web ExpressCode: mvipacary MIL-COTS VIPAC Arrays Chassis Mount DC-DC Converter VIPAC Arrays are a highly flexible input power systems that can be configured with up to four user-defined outputs, with power capability, up to 650 W. Features (cid:2) Inputs: 24, 28 & 300 Vdc (cid:2) –55°C operation (cid:2) Configurable multi outputs; Up to 650 W (cid:2) MIL-STD-810F shock & vibration Web ExpressCode: mvipac 28 Vdc MIL-COTS VIPAC DC-DC Configurable Power Supply The 28 Vdc VIPAC can be specified with up to 3 outputs in a choice of connections with voltages as low as 3.3 Vdc to as high as 48 Vdc and power levels from 50 to 400 watts per output for MIL-COTS applications. Features (cid:2) 28 Vdc input (cid:2) –55°C operation (cid:2) MIL-STD-704A-F and MIL-STD-1275A/B/D (cid:2) Profile as low as 0.75 in. (19,0 mm) input transient protection (cid:2) MIL-STD-810F shock & vibration (cid:2) MIL-STD-461E EMI compliance Web ExpressCode: vme450 VME450™ DC-DC Configurable Power Supply Powered with Vicor V(cid:129)I Chips, this single-slot VME power supply is small, light weight and very efficient. Features (cid:2) 28 Vdc input (cid:2) 4 output voltages, 550 W (cid:2) MIL-STD-704A-F and MIL-STD-1275A/B/D (cid:2) -40°C to +85°C input transient protection (cid:2) MIL-STD-461E EMI compliance U.S. & CANADA: 800-735-6200 VICORPOWER.COM 37 Consult back cover for a complete list of contacts.

AC-DC Westcor Division Configurable Power Supplies Web ExpressCode:lopac LoPAC Family Switcher Power Supplies RoHS The LoPAC Family consists of three power supplies available as one-, two-, PFC Mini or three-slot packages. For maximum flexibility, they are configured with standard Vicor DC-DC converters. These modules cover the entire range of outputs from 2 – 95 Vdc (higherthrough series arrays) and 25 – 600 W per output, as well as an array of non-standard voltages. Depending on the configuration, the LoPACs can provide up to six user-specifiable isolated outputs. Features PFC Micro (cid:2) Near unity power factor (cid:2) MIL- STD-810E-Vibration PFC MicroS (PFC Mini) (cid:2) Power factor corrected (cid:2) Output power: Up to 1,500 W (cid:2) Agency approvals: LoPAC Family Accessories UL, cTÜVus, CE Marked Configure Your LoPAC Online (cid:2) Up to 6 user-specifiable outputs Page 52 (cid:2) Power density: Up to 11 W/in3 (cid:2) Choice of full, half, PO ERBENCH or quarter brick (cid:2) Fan cooled vicorpower.com/vspoc General Performance Refer to data sheet for detailed specifications Input Number Number Maximum Output Power Modules Product Dimensions Voltage of Slots of Outputs @ 230 Vac @ 115 V per Slot 12.2” x 6” x 1.72” 85 – 264 Vac PFC Mini 3 6 1,500 W 800 W 1 Full or 2 Half (309,9 x 152,4 x 43,6 mm) 100 – 380 Vdc 10.4” x 5.06” x 1.86” 85 – 264 Vac 1 Full or 2 Half PFC Micro 2 6 800 W 500 W (264,1 x 128,5 x 47,3 mm) 100 – 300 Vdc or 3 Quarter 7.95” x 5.06” x 1.86” 85 – 264 Vac 1 Full or 2 Half PFC MicroS 1 3 600 W 500 W (201,9 x 128,5 x 47,3 mm) 100 – 300 Vdc or 3 Quarter Note:For detailed information, review specific product design guides available online at vicorpower.com Part Numbering Ordering, see back cover for contacts P M X – X X X – XXXX -X -X 1 2 3 4 5 6 Product Prefix Number of Outputs Number of Number of Optional Factory Factory Optional Factory Optional Codes PM=PFC Mini 1 –6 VI-200 / VI-J00 Maxi, Mini or Micro Assigned Assigned Assigned LL=Low Leakage[a] PC=PFC Micro Series Modules Series Modules 2 =FasTrak[a] QF=Quiet Fan[a] PS =PFC MicroS G =RoHS [a]PFC Mini Only Standard Single-Output Configurations PFC Mini[b] Vout Amps Watts PFC Micro[c] Vout Amps Watts PFC MicroS[d] Vout Amps Watts PM1-03B-48-2 48 31.2 1,500 PC1-02B-48 48 16.7 800 PS1-01-48 48 12.5 600 PM1-03B-28-2 28 53.6 1,500 PC1-02B-28 28 28.6 800 PS1-01-28 28 21.4 600 PM1-03B-24-2 24 62.5 1,500 PC1-02B-24 24 33.3 800 PS1-01-24 24 25.0 600 PM1-03B-15-2 15 100 1,500 PC1-02B-15 15 53.3 800 PS1-01-15 15 40.0 600 PM1-03B-12-2 12 125.0 1,500 PC1-02B-12 12 66.7 800 PS1-01-12 12 50.0 600 PM1-03B-05-2 5 240.0 1,200 PC1-02B-05 5 160.0 800 PS1-01-05 5 80.0 400 [b]Replace -2 with -G for RoHS compliant [c] Add -G to end of part number for RoHS compliant [d]Add -G to end of part number for RoHS compliant VANTAGE Line – Westcor’s Affordable Power Supply Option Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGELine of power supplies was developed with all of the user configurability, field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest Rep location go tovicorpower.com//company/contact_us 38 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

AC-DC Westcor Division Configurable Power Supply Web ExpressCode: flatpacen FlatPAC-EN Power Supply RoHS The FlatPAC-EN is capable of providing up to 500 W (425 W for EN compliance) from up to four isolated outputs. The FlatPAC-EN can be configured with standard Vicor DC-DC converter modules. Like all other configurable power supplies offered by Vicor, the optimum FlatPAC-EN solution can be factory configured based on the exact voltage and power requirements of the customer. Features (cid:2) EN61000-3-2 harmonic current compliance (cid:2) Agency approvals: UL, cTÜVus, CE Marked (cid:2) Output power: Up to 500 W (cid:2) Choice of full-, half- and quarter-brick (425 W for EN compliance) moduleswith outputs from 2 –95 Vdc and 25 –500 watts, as well as an array of FlatPAC-EN (cid:2) Power density: >7 W/in3 non-standard output voltages Accessories (cid:2) Ultra low profile: 1.4" (35,6 mm) height (cid:2) Conduction or convection cooled Page 52 (cid:2) RS-232 microcontroller interface (same model) (cid:2) Rugged: Meets MIL-STD-810E, category 10 for vibration General Performance Refer to data sheet for detailed specifications Product Dimensions Input Voltage Output Power Number of Outputs 9.2” x 5.0” x 1.4” 90 – 132 / 180 – 264 Vac 500 W FlatPAC-EN 1 – 4 (233,7 x 127 x 35,6 mm) 250 – 380 Vdc (425 W for EN compliance) Part Numbering Ordering, see back for phone numbers F L X – X X - XXXX -X -X 1 2 3 4 5 Configure Your FlatPAC-EN Online Product Prefix Number of Number of Number of Factory Optional Factory Optional Codes PO ERBENCH FL =FlatPAC-EN Outputs VI-200 / VI-J00 Maxi, Mini or Micro Assigned Assigned 1 –4 Series Modules Series Modules G = RoHS vicorpower.com/vspoc Layout Configurations InpMutB CJ1onn. InterfCacBeJ1 Conn. InpMutB CJ1onn. InterfCaBceJ1 Conn. InpMutB CJ1onn. InterfCaBceJ1 Conn. Single or Dual Outputs Triple Outputs Quadruple Outputs Assumes either a full brick Assumes only half Assumes only half and / or half brick is used. bricks are used. M3 M4 and / or quarter bricks MiniHAM M2 FSotru ad sCinognlen eocuttoprust MiniHAM V M I- inoJ0ir0 MolTewx oC o1n8n-peicnt ors. MiniHAM V M I-oJinr0i0 aMre oulesexd C. oTwnnoe 1ct8o-rpsi.n VI-200, V MI- MoJi0nr10i MoBraa txmiod eitherc oMn1fi gour rMat2io ins ,u sed. V M IM-oinJr0i10 V M IM-oinJr02i0 MMic1ro MMicr2o MMic3ro Note:The type of output connector a FlatPAC-EN has depends on which modules are used. For example, if a two output configuration uses two half bricks (instead of a full brick and half brick) this two output configuration will have the 18 pin Molex connectors, not stud connectors. VANTAGE Line – Westcor’s Affordable Power Supply Option Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGELine of power supplies was developed with all of the user configurability, field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest Rep location go tovicorpower.com/company/contact_us U.S. & CANADA: 800-735-6200 VICORPOWER.COM 39 Consult back cover for a complete list of contacts.

AC-DC Westcor Division Configurable Power Supply Web ExpressCode: megapac MegaPAC Family User & Field Configurable Power Supplies RoHS The MegaPAC family consists of eight fan-cooled, configurable power supplies that enable users to factory configure almost any set of output requirements by combining appropriate slide-in output assemblies called ConverterPACs, with the appropriate chassis. The MegaPAC chassis has a standardized feature-laden front end with slots to accept the ConverterPACs. Models are available with single or three-phase AC inputs. MegaPACs will also operate from high-voltage DC input. Features include EMI / RFI filtering, enable / disable, general shut down, output sequencing and AC OK. Features (cid:2) Output power: 200 –4,000 Watts (cid:2) Fan cooled MegaPAC Family Accessories (cid:2) User-confi gurable outputs (cid:2) Efficiency: >80% Page 52 (cid:2) Up to 20 outputs (cid:2) Agency approvals: UL, cTÜVus, CE Marked (cid:2) DC input capability (cid:2) Low leakage option available (some models) Configure Your (cid:2) Power factor corrected (some models) (cid:2) Current sharing available MegaPAC Online (cid:2) Low ripple 10 mV p-p or 0.15%, PO ERBENCH whichever is greater (some models) vicorpower.com/vspoc General Performance Refer to data sheet for detailed specifications Product Dimensions Input Voltage OutputPower # of Outputs Slot Configurations Mini 9.5" x 6.0" x 3.4" 90 –132/180 –264 Vac; Strappable 1,000 W @ 115 Vac 1–10 ModuPAC, JrPAC, MegaPAC (241,3 x 152,4 x 86,4 mm) 260 –380 Vdc or 230 Vac (5 slots) DualPAC,RAMPAC,BatPAC Autoranging 11.9" x 6.0" x 3.4" 90 –132/180 –264 Vac 1,200 W @ 115 Vac 1–16 ModuPAC, JrPAC, MegaPAC (302,3 x 152,4 x 86,4 mm) 260 –380 Vdc 1,600 W @ 230 Vac (8 slots) DualPAC, RAMPAC, BatPAC 4 kW 17.0" x 7.5" x 4.9" 208 or 240 Vac; 3-Phase 2,000 W –4,000 W, (3Ø) 1–20 QPAC, DualQPAC, MegaPAC-EL (431,8 x 190,5 x 124,5 mm) 260 – 352 Vdc 1,500 W, (1Ø) (10 slots) JrQPAC, QPAC (XQ) PFC 12.3" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1–13 BatPAC, ModuPAC, JrPAC, MegaPAC/HP (312,4 x 152,4 x 86,4 mm) 100 – 380 Vdc 2,400 W @ 230 Vac (8 slots) DualPAC, RAMPAC, FinPAC PFC 15.6" x 6.0" x 3.4" 85 – 264 Vac 1,200 W @ 115 Vac 1–13 QPAC, DualQPAC, MegaPAC-EL/HPEL (396,2 x 152,4 x 86,4 mm) 100 – 380 Vdc 2,400 W @ 230 Vac (8 slots) JrQPAC, FinQPAC 4 kW 14.0" x 7.5" x 4.9" 208 or 240 Vac; 3-Phase 2,000 W –4,000 W, (3Ø) 1–20 ModuPAC, JrPAC, DualPAC, MegaPAC (355,6 x 190,5 x 124,5 mm) 260 – 352 Vdc 1,500 W, (1Ø) (10 slots) RAMPAC,BatPAC,UniPAC Note:For detailed information, review specificproduct design guides available online at vicorpower.com Part Numbering Ordering, see back cover for contacts M P X – X X XXXX -X X -X -X 1 2 3 4 5 6 7 Product Prefix Number Chassis Type Number Factory Optional Optional Optional Codes MP = Chassis using VI-200 / VI-J00 Series of Outputs 1= 115 –230 Vac of Assigned Codes Codes EL=Extended Length Modules only 1 –20 Strappable Modules 4 kW 2= FasTrak LL=Low Leakage MX = Chassis using VI-200 / VI-J00 Series 4= 3-Phase MegaPAC G= RoHS and / or Maxi Series Modules only 7= PFC and MM= Chassis using VI-200 / VI-J00 Series 9= Autoranging MegaPAC-EL Modules only (Strappable) only VANTAGE Line – Westcor’s Affordable Power Supply Option Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGELine of power supplies was developed with all of the user configurability, field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest Rep location go to vicorpower.com//company/contact_us 4400 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

AC-DC Westcor Division Configurable Power Supplies Web ExpressCode: cpacs ConverterPACs Output Power Up to 600 Watts ConverterPACs incorporate VI-200 or VI-J00 and / or Maxi Vicor DC-DC converter bricks. For additional power, ConverterPACs can be paralleled. Some ConverterPACs are available for low-noise applications (VXI options, RamPACs and QPACs) and as current sources (BatPACs). All ConverterPACs can be easily removed in the field by loosening a single screw and sliding the unit out of the chassis. Web ExpressCode:cpacs1 VI-200 / VI-J00 ConverterPACs [a] Output Power Up to 200 Watts For general electrical specifications for VI-200 / VI-J00 ConverterPACs, see module specifications on the VI-200 / VI-J00 data sheets in the library section of our website. ModuPAC (M) JuniorPAC (J) RamPAC (R) BatPAC (B) Up to 200 W Up to 100 W Up to 100 W Up to 200 W programmable current source DualPAC (D) QPAC (L) DualQPAC (LD) JrQPAC (LJ) Dual outputs: Up to 200 W Up to 100 W / output Up to 100 W Up to 100 W / output Web ExpressCode: cpacs2 Maxi ConverterPACs [a] Output Power Up to 600 Watts For general electrical specifications for Maxi ConverterPACs, see module specifications on the data sheets in the library section of our website. UniPAC (XU) FinPAC (PZ) QPAC (XQ) FinPAC (PZL) Up to 500 W Up to 600 W Up to 500 W Up to 600 W [a]RoHS compliant ConverterPACs have a"G" added to their prefix (except the PZL where the RoHS version will be GPL). U.S. & CANADA: 800-735-6200 VICORPOWER.COM 41 Consult back cover for a complete list of contacts.

Vicor CUSTOM Web ExpressCode:custom Custom Power Solutions Designed To Fit Your Specific Needs Small company responsiveness, large company resources The sole focus of Vicor Custom Power is designing and manufacturing turnkey custom power systems. Our custom power design centers maintain the flexibility of small entrepreneurial companies while takingadvantage of Vicors technical and business resources to deal effectivelywith your most challenging power problems. Our total focus is on the power solution that best satisfies your needs. Providing custom power solutions for: COMMUNICATIONS INDUSTRIAL DATACOM TEST EQUIPMENT MEDICAL MILITARY / AEROSPACE TRANSPORTATION Custom Power Design Centers: Aegis Power Systems Freedom Power Systems Mission Power Solutions Tel: 1 828 837 4029 Tel: 1 512 259 0941 Tel: 1 760 631 6846 email: aegis@aegispower.com email: sales@freedompower.com email: sales@mpwrs.com aegispower.com freedompower.com mpwrs.com ConverTec Corporation Granite Power Technologies Northwest Power Integrations Tel: 1 651 604 0289 Tel: 1 603 623 3222 Tel: 1 503 652 6161 email: eswanson@vicorpower.com granitepower.com email: info@npi-inc.com npi-inc.com Locations: See our website page for complete details Granite Power Technologies ConverTec Northwest Corporation Manchester, NH Power Integrations Roseville, MN Milwaukie, OR Aegis Power Systems Murphy, NC Freedom Power Systems Cedar Park, TX Mission Power Solutions Oceanside, CA 42 U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM Consult back cover for a complete list of contacts.

Vicor CUSTOM Web ExpressCode:custom Capabilities Overview Vicor Custom Power has the capability to design, prototype, mass produce and certify a complete power system. Design: Electrical and mechanical Prototype: By utilizing Vicor’s standard power components, delivery of prototype units can be very fast and in some cases, just a matter of weeks. Mass production: Capacity to manufacture thousands of power systems per year. Reliability / Certification: HALT (Highly Accelerated Life Test) Temperature Cycling Burn In Thermal Shock Humidity Accelerated Life Test Power Cycling Vibration EMI Transient Immunity Altitude Explosive Atmosphere Mechanical Shock Acceleration U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM 43 Consult back cover for a complete list of contacts.

Vicor Custom Off-the-Shelf Configurable Power Supplies Web ExpressCode: vme450 VME450™ From Aegis Power Systems The single-slot VME450 power supply — filtered 28 Vdc, four output (3.3, 5, ±12 V),550 W — is a MIL-COTS solution that is compliant to the vibration requirements of MIL-STD-810F and EMI per MIL-STD- 461E. When compared to VME power supplies using conventional technology, the one-slot VME450 provides users with higher efficiency (85%), lower weight (2.4 pounds), and higher power (up to 550 W). Features (cid:2) 28 Vdc per MIL-STD-704F (cid:2) Output power: 550 W (cid:2) 28 Vdc per MIL-STD-1275D (cid:2) 4 isolated outputs (cid:2) Vin max range: 18 –36 Vdc (cid:2) Temperature: –40 to +85˚C (cid:2) MIL-STD-461E conducted EMI (cid:2) Utilizes Vicor’s V(cid:129)I Chips (cid:2) Input power: 650 W (cid:2) Single slot VME Web ExpressCode: dcmegapac DC-DC MegaPAC™ From Mission Power Solutions The DC MegaPAC allows users to instantly configure highly-efficient DC-DC power supplies. A complete power supply is configured by selecting and inserting up to eight slide-in output assemblies called "ConverterPACs". ConverterPACs incorporate one or two Vicor DC-DC converters and are available in a wide array of outputs and power levels. If output requirements change, the user can simply unlock a single screw and replace the slide-in ModuPAC assembly with one that has the desired rating. Features (cid:2) DC inputs: 12 –72 V available (cid:2) Conducted EMI meets BTR 2511 (cid:2) Output power: Up to 16 outputs (cid:2) Remote sense capability and output and 1,600 W total power overcurrent protection on all outputs (depending upon input voltage) (cid:2) Output overvoltage protection on most outputs (cid:2) Temperature rating: (cid:2) Output overtemperature protection on all outputs Full power to 45°C; half power to 65°C (cid:2) Input over, under and reverse voltage protection (cid:2) Dimensions: 3.4"H x 6.0"W x 12.0"L (86,3 x 152,4 x 304,8 mm) (cid:2) Box-to-box paralleling capability (cid:2) 9.25 lbs. fully configured (cid:2) Input temperature monitor, warning and shut down (cid:2) Fan cooled (cid:2) CE Marked (cid:2) Soft start for limiting inrush current 44 U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM Consult back cover for a complete list of contacts.

Vicor Custom Off-the-Shelf Configurable Power Supplies Web ExpressCode: badger Badger™ From Mission Power Solutions The Badger is a rugged PFC multi-output power supply, capable of withstanding extreme environments and stresses often inherent with military applications. General Specifications Typical unless otherwise noted Product Dimensions Input Max # Maximum Cooling Notes Voltage of Outputs Power 2.55” x 7.0” x 13.75” Badger 85 – 264 Vac 12 1,800 W Internal fans OCP, OVP, and OTP on all outputs (64,8 x 177,8 x 349,3 mm) Web ExpressCode: javelin Javelin™ From Mission Power Solutions The Javelin is an AC input power supply with a single DC output, capable of up to 5,400 W, in a rugged package suitable for industrial and military applications. General Performance Refer to data sheet for detailed specifications Product Dimensions Input Max # Maximum Cooling Voltage of Outputs Power 4.9” x 7.0” x 10.75” Javelin I 85 – 254 Vac 1 600 – 1,800 W Internal fans (124,5 x 177,8 x 273,05 mm) 4.9” x 7.0” x 9.5” Javelin II 85 – 254 Vac 1 600 – 1,800 W No fan (124,5 x 177,8 x 241,3 mm) 7.0” x 16.0” x 13.0” 85 – 254 Vac Javelin III 1 1,800 – 5,400 W Internal fans (177,8 x 406,4 x 330,2 mm) 3-Phase Web ExpressCode: powerbank PowerBank™ From Northwest Power Integrations The PowerBank is a low-profile AC-DC switching power supply that offers up to six configurable outputs at up to 1,500 Watts. General Performance Refer to data sheet for detailed specifications Product Dimensions Input Max # Maximum Cooling Notes Voltage of Outputs Power 1.74” x 8.08” x 10.28” PB1004PFC 85 – 264 Vac 4 1,000 W Internal fans Low power stand-by output (44,2 x 205,2 x 261,1 mm) 1.68” x 7” x 10.5” 115/230 Vac PB1005AC 5 1,000 W Internal fans SEMI F47 compatible (42,7 x 177,8 x 266,7 mm) 300 Vdc 1.75” x 12.6” x 16.84” PB1506PFC 90 – 264 Vac 6 1,500 W Internal fans Two aux. low power outputs (44,5 x 320,04 x 427,7 mm) 2.5” x 7.38” x 9” PBC1002AC 115/230 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink (63,5 x 187,5 x 228,6 mm) 2” x 6.5” x 13.5” PBC1002PFC 90 – 264 Vac 2 1,000 W Cond., conv., liquid Customizable baseplate / heat sink (50,8 x 165,1 x 342,9 mm) U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM 45 Consult back cover for a complete list of contacts.

Evaluation Boards V(cid:129)I Chip Products Web ExpressCode: bcmeb V(cid:129)I Chip BCM RoHS The BCM Evaluation Board has been designed to facilitate the verification of the V(cid:129)I Chipssuperior performance in the areas of power density, efficiency (over a wide load range), fast response and quiet, low-noise operation. Example Number Adding the suffix "EB” to the BCM model number designates the Evaluation B048F120T30-EB Board. For examplethe B048F120T30-EB specifies a 48 V to 12 V at 300 W BCM mounted to an Evaluation Board. Web ExpressCode: viceb PRM & VTM The PRM and VTM Evaluation Boards allow the user to develop an RoHS understanding of Factorized Power Architecture (FPATM) using the PRM and VTM chip set. Simply select the PRM Evaluation Board to match your input voltage and VTM Evaluation Board to provide the desired output voltage and current and plug them together. Example Number Example Number P045F048T32AL-CB V048F040T050-CB Web ExpressCode: bcmpb High Voltage BCM The HV BCM Evaluation Board is used for powering, testing and evaluating RoHS the 380 Vdc input BCMs. The HV BCM Evaluation Board is available as a Parallel Array Board with a 12 Vdc, 100A output or as a Series Array Board with a 48 Vdc 25A and / or 12 Vdc, 25A with up to 1,200 Watts total. Parallel Array Example Number B384F120T30-PB Web ExpressCode: prmcc PRM Constant Current Board The PRM Constant Current (CC) Demonstration Board is suitable for light-emitting RoHS diode (LED) applications such as street & stadium lighting, high-end projectors, active Example Number outdoor advertising and architectural installations. The board provides a precisely P048F048T24AL-CC regulated current as required for direct drive multi-LED applications where the intensity and brightness are controlled by regulating the current through the LEDs. Evaluation Boards DC-DC VI BRICK Products Web ExpressCode:vibeb VI BRICK RoHS VI BRICK evaluation boards are available to verify the performance and simplify testing of VI BRICK modules. There are separate boards for the VI BRICK –PRM, VTM, BCM, and DC-DC converters. Description Part Number VI BRICK PRM evaluationboard } VI BRICK VTM evaluationboard Add "-CB" suffix to the VI BRICK BCM evaluationboard VI BRICK specific part # VI BRICK DC-DC evaluationboard 46 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

Evaluation Boards DC-DC Brick / EMI Filters / Output Filters & Cool-ORingProducts Web ExpressCode: mmmeb Maxi, Mini & Micro RoHS (cid:2) Three styles: Maxi, Mini or Micro Description Part Number (cid:2) Inboard and onboard compatible Maxi board style 24644R (cid:2) Easy I/O and control connections Mini board style 24645R (cid:2) Includes fusing and capacitors Micro board style 24646R (cid:2) Can be paralleled for higher power arrays Web ExpressCode: qpieb qpoeb QPI Active EMI Filters & V(cid:129)I Chip Optimized Filters The QPI / QPO filter evaluation boards provide a quick and easy way to evaluate the EMI / EMC performance of the filters with a broad range of DC-DC converters. Available QPI input EMI filter boards include: boards compatible with V(cid:129)I Chip evaluation boards, DOSA pin-out compatible evaluation boards, and universal style use “EVAL1” evaluation boards. QPO output ripple attenuator boards are available in a universal “EVAL1” configuration or with sockets compatible with Vicor Mini and Micro DC-DC converters. Part Number Description QPI-3-CB1[a]......QPI-3LZ for 24 V input DC-DC up to 7 A QPI-4-CB1[a]......QPI-4LZ for 48 V input DC-DC up to 7 A QPI-5-CB1[a]......QPI-5LZ for 24 V input DC-DC up to 14 A QPI-6-CB1[a]......QPI-6LZ for 48 V input DC-DC up to 14 A QPI-7-CB1[a]......QPI-7LZ for 24 V input DC-DC up to 6 A, w/ integrated Hot-Swap QPI-8-CB1[a]......QPI-8LZ for 48 V input DC-DC up to 6 A, w/ integrated Hot-Swap [a]The part numbers above are compatible with mounting DOSA compliant DC-DC converters. For universal plug in evaluation boards substitute CB1 with EVAL1. QPI V(cid:129)I Chip Optimized Filter Evaluation Boards QPI-9-CB1.........QPI-9LZ for 24 V input V(cid:129)I Chips up to 6 A, w/ integrated Hot-Swap QPI-10-CB1.......QPI-10LZ for 48 V input V(cid:129)I Chips up to 6 A, w/ integrated Hot-Swap QPI-11-CB1.......QPI-11LZ for 24 V input V(cid:129)I Chips up to 7 A QPI-12-CB1.......QPI-12LZ for 48 V input V(cid:129)I Chips up to 7 A MQPI MIL COTS V(cid:129)I Chip Optimized Filter Evaluation Board MQPI-18-CB1....MQPI-18LP for 28 V input V(cid:129)I Chips up to 7 A QPO Active Output Filters Part Number Description QPO-1-EVAL1....QPO-1LZ, 3 –30 V input up to 10 A QPO-1-EVAL3....QPO-1LZ, board with sockets for Vicor Mini DC-DC converter QPO-1-EVAL5....QPO-1LZ, board with sockets for Vicor Micro DC-DC converter QPO-2-EVAL1....QPO-2LZ, 0.5 –5.5 V input up to 20 A Web ExpressCode: coreb Cool-ORing Discrete & Full-Function Active ORing Solutions The Cool-ORingevaluation boards offer a quick and easy way for the user to complete functional testing of Picor’s Cool-ORingsolutions. These evaluation boards demonstrate solutions satisfying a range of Active ORing requirements,covering several typical redundant bus voltages. The user can chose to evaluate a discrete implementation or a high density integrated solution depending on system level requirements. The user can use the evaluation board to measure steady state efficiency as well as test dynamic performance of the Cool-ORingproduct under system level fault conditions. Part Number Description PI2001-EVAL1 PI2001 using 3 x 3 mm TDFN package & SO-8 MOSFET in high-side configuration PI2002-EVAL1 PI2002 using 3 x 3mm TDFN package and back-to-back SO-8 MOSFETs in high-side configuration PI2003-EVAL1 PI2003 using 3 x 3 mm TDFN package and 100V SO-8 MOSFET in low-side configuration PI2121-EVAL1 PI2121 configured for a high-side ground referenced application PI2122-EVAL1 PI2122 Active ORing with load disconnect PI2125-EVAL2 PI2125 configured for a high-side floating application U.S. & CANADA: 800-735-6200 VICORPOWER.COM 47 NOTE:Both PI2121-EVAL1 and PI2125-EVAL2 are compatible with the PI2123 solution. Consult back cover for a complete list of contacts.

ACCESSORIES Web ExpressCode: mounting1 Mounting & Thermal Management All parts are RoHS compliant unless otherwise noted Longitudinal Fins Transverse Fins Longitudinal Fins Transverse Fins Longitudinal Fins Transverse Fins 0 0 2 VI- 0.90" Fin 0.90" Fin 0.70" Fin 0.70" Fin 1.45" Fin 0.40" Fin (22,8 mm) (22,8 mm) (17,7 mm) (17,7 mm) (36,8 mm) (10,1 mm) 30089 30090 30775 30193 30780 30194 Longitudinal Fins Transverse Fins Transverse Fins 0 J0 0.90" Fin 0.90" Fin 0.40" Fin VI- (22,8 mm) (22,8 mm) (10,1 mm) 30191 30771 30140 Maxi Heat Sinks Mini Heat Sinks Micro Heat Sinks Threaded Through Hole Threaded Through Hole Threaded Through Hole s n Fi al n di 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin u t (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) gi 30482 30718 32188 30195 32174 30719 n o L 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin s (2320,81 m88m) (2320,81 m81m) (2320,81 m89m) (2320,81 m82m) (2320,81 m90m) (2320,81 m83m) n Fi e rs 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin 0.4" Fin e v (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) (10,1 mm) ns 30778 30720 30184 30721 32173 30722 a Tr 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin 0.9" Fin (22,8 mm) (22,8 mm) (22,8 mm) (22,8 mm) (22,8 mm) (22,8 mm) 30196 30723 30269 30724 30270 30725 V(cid:129)I Chip Heat Sinks & Push-Pins Low-profile side-fin heat sinks – Height For use with PRM, VTM and BCM V(cid:129)I Chip only 0.125" (3,1 mm) above module baseplate Power Components 0.55" (13,9 mm) 0.55" (13,9 mm) 0.55" (13,9 mm) Side Fins Side Fins Side Fins 30096 32190 30095 Heat Sink Part Number Push-Pins Part Number (includes thermal interface) (incudes spring) Transverse Fins, 11 mm 32438 0.051" – 0.069" PCB 32434 Transverse Fins, 6.3 mm 32439 0.070" – 0.104" PCB 32435 Longitudinal Fins, 11 mm 32440 0.105" – 0.132" PCB 32436 Longitudinal Fins, 6.3 mm 32441 0.133" – 0.156" PCB 32437 48 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

ACCESSORIES Web ExpressCode: mounting2 Thermal Management ThermMate™ Thermal Pads For use with Vicor modules, ThermMate thermal pads are a “dry” alternative to thermal compound and are pre-cut to the outline dimensions of the module. Thermal Pad Part Number Thickness 20267 VI-200 (10 pc. pkg.) 20266 0.007" (0,17 mm) VI-J00 (10 pc. pkg.) 20267 0.007" (0,17 mm) 20266 Maxi (10 pc. pkg.) 20263 0.007" (0,17 mm) 20263 Mini (10 pc. pkg.) 20264 0.007" (0,17 mm) Micro (10 pc. pkg.) 20265 0.007" (0,17 mm) VI BRICK –PRM / VTM / BCM 34636 0.007" (0,17 mm) 34637 Size “A” (10 pc. pkg.) 20264 VI BRICK –DC-DC Converter 34637 0.007" (0,17 mm) Size “B” (10 pc. pkg.) 20265 34636 Grounding Clips For use with FinMod and SlimMod packaging options (Page 23). Grounding clips provide a convenient means for making electrical connection between the heat sink assembly and the printed circuit board. 32186 Use With... Part Number 32187[a] F1 and F2 32185 F3 and F4 32186 SlimMods 32187[a] 32185 [a]Not RoHS compliant Web ExpressCode: standoffs Mounting Standoffs Module Standoffs Standoffs and screws For mechanical mounting of VI-200 and VI-J00 Series modules. Bulk and single-module kits Also provides grounding of the module from the baseplate compatible with all standard to the printed circuit board. (Sold individually) mounting configurations. Description Part Number 0.525" (13,3 mm) Long 10692-01 0.25" (6,3 mm) Hex Sockets Sockets are available for all Vicor VI-200 and 30075 VI-J00 modules and are intended for applications 30074 requiring ease of module installation or removal. VIEW MECHANICAL DRAWINGS ONLINE! Vicor modules have nine pins, seven of which are vicorpower.com 0.040" and two are 0.080". Pin Size Finish Part Number 0.040" (1,01 mm) Electro-tin 30074 0.080" (2,03 mm) Electro-tin 30075 Minimum order quantities may apply. U.S. & CANADA: 800-735-6200 VICORPOWER.COM 49 Consult back cover for a complete list of contacts.

ACCESSORIES Web ExpressCode: sockets ModuMate Socket Maxi, Mini & Micro Series SurfMate: Surface Mount Sockets[a] Full brick (Maxi) Half brick (Mini) Quarter brick (Micro) Use module Board Mounting Input Output 5 Sets Input Output 5 Sets Input Output 5 Sets pin style [b] Thickness Style All Surface 22100 22101 16017 22100 22102 16021 22103 22104 16025 S, F mount 1. 2. 3. InMate: Through Hole Sockets[a] All sockets are supplied on InMate headers to assure proper alignment during installation Full brick (Maxi) Half brick (Mini) Quarter brick (Micro) Use module Board Mounting Input Output 5 Sets Input Output 5 Sets Input Output 5 Sets pin style[b] Thickness Style Nominal Inboard 18374 18382 18362 18374 18384 18366 18376 18386 18370 S,F 0.062" (1,57 mm) Min / Max 0.055" / 0.071" Onboard 18378 18388 18364 18378 18390 18368 18380 18392 18372 N,G (1,3 mm)(1,8 mm) Nominal Inboard 18375 18383 18363 18375 18385 18367 18377 18387 18371 S,F 0.094" (2,38 mm) Min / Max Onboard 18379 18389 18365 18379 18391 18369 18381 18393 18373 N,G 0.084" / 0.104" (2,1 mm)(2,64 mm) Nominal 0.125" Onboard 21539 21543 21510 21539 21544 21511 21540 21545 21512 N,G (3,17 mm) Min / Max 0.1125" / 0.1375" (2,85 mm)(3,5 mm) 1. 2. 3. 4. [a]For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and a 40-piece minimum for Micros. [b]Page 15 for pin styles. Module Exchange Tool 22829 Used in facilitating the proper extraction of modules from InMate or SurfMate sockets. Removal without using the Exchange Tool may cause damage to the sockets. 22827 Description Part Number 22828 Maxi Exchange Tool 22827 Mini Exchange Tool 22828 Micro Exchange Tool 22829 50 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

ACCESSORIES Web ExpressCode: chokes Magnetics PR Bus Isolation Transformer Inductor, Differential Mode, Input Developed for isolation of PR Bus signal when used with Maxi, Mini, Micro Inductance / DC Current / parallel configurations. Consult Vicor for applications instructions. Winding Resistance Part Number Part Number 22 µH 12 A / 5.8 mΩ 33206 29768 1 mH 4 A / 250 mΩ 36-00036 Inductors, Differential Mode VI-HAM Line Filter Output inductors may be used to reduce differential output noise by The VI-HAM requires an external line filter. When used in conjunction with approximately 20 dB. part number 30205, the VI-HAM / Filter combination will meet the Inductance DC Current (max.) Part Number requirements of worldwide EMI standards. Part Number 0.2µH 40 A 30268 30205 27 µH 12A 32012 1.8 µH 10A 32497 Inductors, Common Mode These inductors provide a high level of attenuation of common-mode currents. Common Mode Output Inductors Inductance / DC Current / Inductance DC Current (max.) Part Number Winding Resistance Part Number 420 µH 20 A 36-00037 1000 µH 12 A / 6.5 mΩ 31743 350 µH 40 A 36-00029-01 3000 µH 7 A / 18 mΩ 31742 1.27 mH 10 A 36-00029-04 2163 µH 1 A / 42 m (low profile) 31943 70 µH 80 A 36-00029-06 1.3 mH 13 A / 14 mΩ 32006 110 µH 60 A 36-00029-07 Inductor, Output Sense Compensation Inductance Part Number 1 mH 36-00030 [a] [a]Not RoHS compliant Web ExpressCode: caps Web ExpressCode: comp Capacitors Components Capacitors, X-type For filtering specifications of FCC Level A. MOVs For use with front-end m odules. Description Part Number Description Part Number “X” Cap., 0.68 µF 11217 275 V MOV, 14 mm Disc 30076 “X” Cap., 0.47 µF 03047 68 V MOV, 10 mm Disc 30234-068 “X” Cap., 0.33 µF 00927 120 V MOV, 10 mm Disc 30234-120 “X” Cap., 0.22 µF 04068 200 V MOV, 10 mm Disc 30234-200 “X” Cap., 0.15 µF 03269 220 V MOV, 10 mm Disc 30234-220 “X” Cap., 1.0 µF 02573 Gas Discharge Tube For use with the ENMods and VI-ARM. Capacitors, Y-type For EMI / RFI considerations. Part Number Spark Over (DC) Description Part Number 13755 220 V “Y” Cap., 1,500 pF 00770 26107 75 V 13755 “Y” Cap., 4,700 pF 01000 “Y” Cap., 0.01 µF 01501 “Y” Cap., 0.022 µF 03093 “Y” Cap., 4,700 pF SMT version 25283 “Y” Cap., 1,500 pF SMT version 30802 Capacitors, Hold up Product Description Part Number VIEW MECHANICAL DRAWINGS ONLINE! VI-AIM 270 µF, 200 V 30769 vicorpower.com 270 µF, 400 V 30240 VI-HAM 470 µF, 450 V 30249 FARM / ARM 1,200 µF, 200 V 30275 2,200 µF, 200 V 30483 Minimum order quantities may apply. U.S. & CANADA: 800-735-6200 VICORPOWER.COM 51 Consult back cover for a complete list of contacts.

ACCESSORIES Web ExpressCode: connects Connector Kits FlatPAC, FlatPAC-EN, LoPAC, MegaPAC & PFC FrontEnd products All parts are RoHS compliant unless otherwise noted FlatPAC Accessories MegaPAC Accessories Input and Output Retrofit Kits Connector Kits Description Part Number Description Part Number Input connector 14136[a] Single-phase input 19-130040 Output connector 14137[a] Three-phase input 19-130041 DualPAC / Dual QPAC output ConverterPacs 19-130042 Input and Output Mating Connectors Air block 96-00032-01 Description Part Number Input connector, 6 pin[b] 33100 Current Share Boards Output connector, 5 pin[b] 16385[a] Description Part Number MegaPACs using VI-200 CSB01 [a] Not RoHS compliant and VI-J00 Series modules [b]Insertion tool for use with FlatPAC input / output connectors are available from AMP, Inc., part number 58074-1. MegaPAC using Maxi modules CSB02 Manual hand tool, part number 58246-1, interchangeable head. MegaPAC chassis and ConverterPACs can be purchased separately LoPAC Accessories for scalable systems and / or spares. Connector Kits Bus Bars Description Part Number Description Part Number PFC Mini 19-130047 2 holes 88-00033-01 PFC Micro, PFC MicroS 19-130044 3 holes 88-00033-02 4 holes 88-00033-03 Current Share Boards 5 holes 88-00033-04 Description Part Number Series bus bar 88-00043 LoPACs using VI-200 CSB01 and VI-J00 Series modules LoPACs using Maxi, Mini CSB02 and Micro Series modules FlatPAC-EN Accessories PFC FrontEnd Accessories Connector Kit Description Part Number FlatPAC-EN 19-130044 Description Part Number Din Rail Mounting Kit 19-130060 Current Share Boards Connector Kit 19-130059 FlatPAC-EN using VI-200 CSB01 VIPAC Array Adapter 19-130064 and VI-J00 Series modules FlatPAC-EN using Maxi, Mini CSB02 and Micro Series modules 52 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

QUALITY Technical Information Web ExpressCode:qual Quality System We use the “Plan-Do-Check-Act" model (PDCA) to foster continuous improvement. We focus on key performance metrics that are continuously Browse measured and reviewed. This enables us to be proactive in improving our Vicor’s Quality Process technology, our products, our processes, and our service to our customers. Create Quality Center Online Custom Quality Reports (cid:2) Explore Vicor’s quality systems through a robust library of documentation, videos, and process charts. Download (cid:2) Generate a report based on ISO 9001:2000 criteria Standard Quality Reports that entirely meets your specific requirements. (cid:2) Get your report in PDF format with hyperlinks to videos and other information of your choosing. Quality Library See and hear quality systems at work Experience Vicor’s (cid:2) White papers on specific quality issues Quality Center (cid:2) ISO 9001:2000 certificates vicorquality.com (cid:2) RoHS compliant information (cid:2) Contact our quality team Play Video> Play Video>> Play Video>> Play Video>> Play Video>> Play Video> Play Video>> Play Video>> Play Video>> Play Video>> RoHS Technical Information Web ExpressCode:rohs RoHS Compliance Vicor Corporation has a strong commitment to protecting our environment. As an ISO 9001:2000 registered company and a member of the global community, we are dedicated to meeting government regulations, international standards, and our customers' requirements. To those ends, we have developed and currently maintain Environmental Management Systems (EMS) and the requisite controlled business, design, and manufacturing processes to service our worldwide customer base. ISO 9001:2000 Certified Vicor is dedicated to developing and maintaining design and manufacturing processes to competitively service our world-wide customer base that meet government regulations, international standards, and our customers requirements. U.S. & CANADA: 800-735-6200 VICORPOWER.COM 53 Consult back cover for a complete list of contacts.

VICORPOWER.COM Use the Power of the Web Develop your power solution by going to vicorpower.com. It's one of the premiere power-conversion sites on the web. Vicorpower.com is especially designed to get you the information you need quickly. And, through Vicor's unique mass-customization capabilities, we can provide you with exactly the power specifications you want at a price that's always affordable. Whether it's converters, user-configurable or custom power, Vicor has the high-value solution. Here’s what you’ll find on vicorpower.com (cid:2) Design Guides and Application Notes (cid:2) Data sheets and mechanical drawings for all Vicor products (cid:2) PowerBench product configurators and a converter simulator that specifically analyzes your best options (cid:2) Technical seminars with synchronized video, PowerPoint, and access to related resources (cid:2) Webcasts on technical subjects of interest (cid:2) Application demonstrations MECHANICAL (cid:2) Online Product & Military catalog with direct links to product pages, DRAWINGS data sheets, and mechanical drawings (cid:2) Dedicated quality site with detailed factory tour and a custom quality report generator (cid:2) Technical articles that cover a huge range of applications challenges vicorpower.com Experience one of the premiere power DATA SHEETS conversion sites on the web Feel free to contact Applications for any technical questions you may have at 1-800-927-9474 or Customer Service for price and delivery at 1-800-735-6200. VIDEOS For all other phone numbers, please consult back cover. CONFIGURATORS QUALITY 54 U.S. & CANADA: 800-735-6200 VICORPOWER.COM CENTER Consult back cover for a complete list of contacts.

PowerBench™ Online Product Configurator Tools PO ERBENCH Web ExpressCode: pwrb Do-It-Yourself Power Design Custom Design Systems Design your own DC-DC converter or configurable power supply – online – anytime using Vicor's custom configurators. Designs that you create are saved in your "My Designs" account for future review and editing. You register only once to access all Vicor's custom configurators via the "Single Sign-On" feature. With Vicor's PowerBench Custom Module Design Systemyou can design your own DC-DC converters using our proprietary simulator or using hundreds of predefined designs. You simply specify design parameterssuch as input voltage range, output voltage set point, output power, packaging, and environmental options. A true expert system, our Custom Module Design System generates a variety of valid designs, ranks them all, and selects the optimum one. A unique part number, unit price, and delivery schedule will be returned to you. You can even order online. PowerBench’s VCAD™is a patented system that enables users to specify online, the design of Vicor's VIPAC family from available input voltages, output configuration, thermal features, mechanical configurations, and an optional power up / power down SINGLE SIGN-ON sequencing feature. PowerBench’s VSPOC™enables the registered user to specify and verify complete AC-DC power supplies in real time. The system is fully integrated with Westcor manufacturing operations. Once the user approves the product configuration, a bill of materials is generated and an order can be placed immediately. Vicor is committed to meeting designers’ needs via mass customization. All our manufacturing facilities have this capability. We'll support you with the best applications group in the industry. Thousands of designers worldwide have taken advantage of custom Vicor DC-DC converters and power supplies designs. You can, too. PO ERBENCH Custom Module Design System Design your own DC-DC converters at vicorpower.com/powerbench My Designs An online tool for storing the designs you create U.S. & CANADA: 800-735-6200 VICORPOWER.COM 55 Consult back cover for a complete list of contacts.

SUPPORT Applications Web ExpressCode: support1 Locations Around The World Vicor understands that technical support is critical to our customers. As a result, the Vicor Applications Engineering staff is comprised of technically competent, highly experienced field applications engineers who provide our customers with detailed technical support — within 24 hours — anywhere in the world. Our Applications Engineers, each with a thoroughly equipped lab, are established in locations across the globe ready to assist you in the pursuit of the optimum power solution. Specifically, Vicor Field Applications Engineers offer: (cid:2) Evaluation and recommendation on specific customer design issues backed by a team of factory based Product Line Engineers. (cid:2) Answers to your technical questions by phone, fax, email, or via the Vicor website. (cid:2) Assistance with component-based power system design and power architecture assessment. (cid:2) Support for user needs through visits to your facility or at the FAE’s lab. (cid:2) Technical presentations / seminars, both scheduled and on demand, at your site or elsewhere. (cid:2) A comprehensive library of up-to-date design guides, application notes, and technical articles easily accessible on the Vicor website. This highly skilled team – assembled to include a wide range of engineering experience – has helped users develop component power solutions for thousands of applications in nearly every market segment. Contact the Vicor Applications Group and experience Vicor's special commitment to your design. There’s one goal at Vicor: to help you optimize your power design quickly and affordably. Our worldwide applications engineering staff is ready to give you technical support — NOW! We can easily be reached by telephone or email, in North America at 800-927-9474, in Europe at 00 800 8426 7000 or in Asia at +852-2956-1782 and by email: apps@vicorpower.com. 56 U.S. & CANADA: 800-735-6200 VICORPOWER.COM Consult back cover for a complete list of contacts.

MIL-COTS V(cid:129) I Chips Web ExpressCode: mvichips DC-DC V(cid:129)I Chip Modules 28 V Regulator, Voltage Transformer, & Bus Converter VTMs put isolated current multiplication and voltage division directly at the point of load (POL), and an upstream PRM (Regulator) controls the factorized bus voltage supplied to the VTM to provide line and load regulation. Together, the PRM and VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package. The BCM (Bus Converter Module) functions as a fixed-ratio DC-DC transformer and provides an isolated bus voltage to power the PRM and VTM chip set or other loads. The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many of the ground vehicle and airborne requirements of MIL–STD–1275 and MIL–STD– 704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of 36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is available with twelve voltage division ratios from 1:1 to 1:32 and provides the user with flexibility to supply up to 100 A or 120 W at any output voltage from 1 – 50 Vdc in a surface-mount package occupying only 1 in2. The MIL-COTS BCM is a high efficiency Sine Amplitude Converter (SAC) operating from a 240 to 330 Vdc primary bus to deliver an isolated 30 – 41.2 V nominal, unregulated secondary. Features for PRM Features for VTM Features for BCM (cid:2) Input range: 16 – 50 Vdc (cid:2) Isolated 1–50 Vdc output (cid:2) Input range: 240 – 330 Vdc (cid:2) 1.3 MHz switching frequency (cid:2) 1 µs transient response (cid:2) Output range: 30.0 – 41.2 Vdc (cid:2) Efficiency: 95% (cid:2) 3 MHz switching frequency (cid:2) MIL-STD-704E/F Compliant (cid:2) –55°C to +125°C operation (Tj) (cid:2) Efficiency: Up to 96.5% (cid:2) Efficiency: >95% (cid:2) ZVS buck-boost regulator (cid:2) –55 to +125°C operation (Tj) (cid:2) –55 to +125°C operation (Tj) Web ExpressCode: mvib MIL-COTS VI BRICKs PRM / VTM Thermally Enhanced Package The PRMRegulator Module is a very efficient non-isolated The thermally enhanced VTMvoltage transformer excels regulator specifically designed to provide a controlled Factorized at speed, density and efficiency to meet the demands of Bus distribution voltage for powering downstream VI BRICK advanced power applications. Combined with the PRM Voltage Transformation Modules. In combination, VI BRICK PRMs regulator they create a DC-DC converter with flexibility to and VTMs form a complete DC-DC converter subsystem offering provide isolation and regulation where needed. The PRM all of the unique benefits of Vicor’s Factorized Power can be located with the VTM at the Architecture (FPA): high density and efficiency; point of load or remotely in the back low noise operation; architectural flexibility; plane or on a daughtercard. extremely fast transient response; elimination of bulk capacitance at the point of load (POL); in a thermally enhanced package. MQPI-18 Input EMI Filter MIL-COTS Product Catalog The MQPI-18 is a surface mount DC front-end This document provides in-depth information on Vicor's line of filter that provides EMI filtering for Vicor’s 28 V MIL-COTS standard products, including DC-DC converters, DC-DC V(cid:129)I Chip or VI BRICK modules. The custom solutions, and technical support. MQPI-18 enables designers to meet conducted (cid:2) Environmental stress screening and MTBF emission / conducted susceptibility per MIL- (cid:2) Environmental qualification STD-461E. The MQPI-18 accepts an input voltage of 10 – 80 Vdc and delivers output (cid:2) Custom configured modules current up to 7 A. (cid:2) Field tested... proven reliability Visit vicorpower.com to view the Military Catalog online. This will give you instant access to all 34 U.S. & CANADA: 800-735-6200 VICORPOWER.COM technical documentation for a MIL-COTS product. Consult back cover for a complete list of contacts.

SUPPORT Customer Support Specialists Web ExpressCode:support Ready to assist with all your power needs Our worldwide staff of customer support representatives and applications engineers is at your service to assist in determining the most appropriate power solutions for your system and to assure the quickest delivery of prototype quantities. Customer Support Representative can: (cid:2) Provide price and delivery information (cid:2) Help select the most appropriate product for your application (cid:2) Arrange a visit to your site by a Vicor applications engineer or sales representative (cid:2) Fulfill literature requests (cid:2) Process purchase order requirements (cid:2) Provide order status information. Vicor accepts VISA, MasterCard, American Express, a bank check or money order; an open account with established credit, or COD. Most products are covered by a two–year limited warranty. See vicorpower.com for Vicor’s terms and conditionsalong with our complete warranty statement. F.O.B. Andover, Massachusetts, and Sunnyvale, California. For international pricing, please contact your local Vicor office or distributor. Let us help you find the right solution. With offices around the world, Vicor is eager to help you meet your power needs. Our highly trained sales staff can help you find a solution that’s right for your business. Call us today. In North America call 1-800-735-6200. In Europe call 00-800-8426-7000. U.S. & CANADA: 800-735-6200 VICORPOWER.COM 57 Consult back cover for a complete list of contacts.

USA Europe Vicor Custom vicorpower.com vicoreurope.com Vicor Custom Technical Support Vicor Corporation Vicor France Tel: 800-496-5570 (Corporate Headquarters) Tel: +33 1 34 52 18 30 25 Frontage Road France: 0800 419 419 Aegis Power Systems Andover, MA 01810-5413 Benelux: 00 800 419 419 20 Murphy, NC Fax: +33 1 34 52 28 30 Tel: 828-837-4029 For General Information Email: vicorfr@vicorpower.com Fax: 828-837-4106 Tel: 978-470-2900 Email: aegis@aegispower.com Fax: 978-475-6715 Vicor Germany aegispower.com Tel: +49 89 962 439 0 For Technical Support Germany: 0800 018 29 18 Convertec Corporation Tel: 800-927-9474 Denmark: 00800 8426 7000 Roseville, Minnesota Fax: 978-749-3341 Austria: 0800 20 37 27 Tel: 651-604-0289 Email: apps@vicorpower.com Fax: +49 89 962 439 39 Fax: 651-604-0293 Email: vicorde@vicorpower.com Email: eswanson@vicr.com For Sales Support In U.S. & Canada: 800-735-6200 Vicor Italy Freedom Power Systems Cedar Park, TX Fax: 978-475-6715 Tel: +39 02 22 47 23 26 Tel: 512-259-0941 Email: vicorexp@vicorpower.com 800 899 677 Fax: 512-259-4438 Fax: +39 02 22 47 31 66 Vicor Corporation Email: vicorit@vicorpower.com Email: sales@freedompower.com Lombard, IL freedompower.com Tel: 630-769-8780 Vicor UK Granite Power Technologies Fax: 630-769-8782 Tel: +44 1276 678222 Manchester, NH UK: 0800 980 8427 Tel: 603-623-3222 Vicor, Westcor Division Sweden: 020 794 143 Fax: 603-627-3222 Sunnyvale, CA Fax: +44 1276 681269 Email: tduff@granitepower.com Tel: 408-522-5280 Email: vicoruk@vicorpower.com granitepower.com Fax: 408-774-5555 westcorpower.com Mission Power Solutions Asia-Pacific Oceanside, CA Picor Corporation Tel: 760-631-6846 Slatersville, RI Vicor Japan Co., Ltd. Fax: 760-631-6972 Tel: 401-235-1100 Tel: +81-3-5487-3880 Email: sales@mpwrs.com Fax: 401-235-1117 Fax: +81-3-5487-3885 mpwrs.com picorpower.com vicorpower.jp Northwest Power Integrations Vicor Hong Kong Milwaukie, OR Tel: +852-2956-1782 Tel: 503-652-6161 Fax: +852-2956-0782 Fax: 503-652-6868 vicor-asia.com Email: info@npi-inc.com npi-inc.com In Latin America: Argentina: 800-555-4288 Brazil: 0800-890-0288 Mexico: 011 52 333 647 7881 Ask the operator to connect you to: 800-735-6200. ©Vicor Corporation 2009 Printed in USA, 34653, Rev 2.1 7/09