High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Features:  Narrow beam angle  High brightness LED  Water clear plastic package  UV resistant epoxy Description: Each device in the OVLG Series is a high intensity LED mounted in a clear plastic T-1¾ package. Each device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, these LEDs are useful in applications that require a higher on-axis brightness than that achievable with standard lamps. Applications:  Indoor/outdoor applications  Variable message boards  Store front signage Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLGB0C6B9 Blue 7,200 InGaN OVLGC0C6B9 Blue-Green 23,000 Clear OVLGS0C8B9 Red 14,000 AlInGaP OVLGY0C9B9 Yellow 14,000 RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 1

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Absolute Maximum Ratings (T = 25o C unless otherwise noted) A Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Blue, Blue-Green 25 mA Continuous Forward Current Red, Yellow 50 mA Peak Forward Current (10% Duty Cycle, 1 kHz) 100 mA Blue, Blue-Green 100 mW Power Dissipation Red, Yellow 120 mW Blue, Blue-Green -0.29 mA/° C Current Linearity vs Ambient Temperature Red, Yellow -0.72 mA/° C LED Junction Temperature 125° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Lead Soldering Temperature (3 mm from the base of the epoxy bulb)1 260° C / 5 seconds Electrical Characteristics (T = 25o C unless otherwise noted) A SYMBOL PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS Blue 4,360 7,200 ---- Blue-Green 11,970 23,000 ---- I Luminous Intensity mcd I = 20 mA V F Red 8,550 14,000 ---- Yellow 8,550 14,000 ---- Blue 2.6 3.2 4.0 Blue-Green V Forward Voltage V I = 20 mA F F Red 1.8 2.0 2.4 Yellow Blue Blue-Green I Reverse Current ---- ---- 10 µA V = 5 V R R Red Yellow Blue 460 470 475 Blue-Green 499 505 511 λ Dominant Wavelength nm I = 20 mA D F Red 620 623 630 Yellow 585 589 595 Blue ---- 15 ---- Blue-Green ---- 15 ---- 2Θ½H-H 50% Power Angle deg I = 20 mA F Red ---- 8 ---- Yellow ---- 8 ---- General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 2

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Typical Electro-Optical Characteristics Curves—Blue & Blue-Green General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 3

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Typical Electro-Optical Characteristics Curves—Red & Yellow General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 4

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Beam Angle: Packaging: 500 pcs per anti-static bag with desiccant Desiccant Barcode Label General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 5

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series Reliability Test LED lamps are checked by reliability tests based on MIL standards. 1. Test Conditions, Acceptable Criteria & Results Std. Test Acc / Rej Classification Test Item Test Conditions Duration Unit Result Method Criteria Operation Life Test MIL-STD-750D Life Test T =25°C , I=30mA * 1000 Hrs 100 0 / 1 Pass (OLT) Method 1026.3 A F High Temperature MIL-STD-750D T =100°C 1000 Hrs 100 0 / 1 Pass Storage (HTS) Method 1032.1 A Test LoSwt oTreamgep e(LrTaStu) re MMIeLt-hSoTdD -1705302D.1 TA=—40°C 1000 Hrs 100 0 / 1 Pass al nt Temp. & Humidity MIL-STD-750D T =85°C , Rh=85% e A 500 Hrs 100 0 / 1 Pass m with Bias (THB) Method 103B I=20mA n F o vir Thermal Shock Test MIL-STD-750D 0°C ~ 100°C n 100 cycles 100 0 / 1 Pass E (TST) Method 1056.1 2min 2min Temperature Cy- MIL-STD-750D -40°C ~ 25°C ~ 100°C ~ 25°C 100 cycles 100 0 / 1 Pass cling Test (TCT) Method 1051.5 30min 5min 30min 5min MIL-STD-750D Solderability 235±5°C , 5 sec. 1 time 20 0 / 1 Pass st Method 2026.4 e T nical Resdisetrainngc eH teoa tS ol- MMIeLt-hSoTdD -2705301D.1 260±5°C , 5 sec. 1 time 20 0 / 1 Pass a h c Lead Integrity MIL-STD-750D Load 2.5N (0.25kgf) Me 3 times 20 0 / 1 Pass Method 2036.3 0°~90°~0° , bend Remark: ( * ) I = 30mA for AllnGaP chip; I = 20mA for InGan chip F F ( ** ) I = 20mA for AllnGaP chip; I = 10mA for InGan chip F F 2. Failure Criteria (T = 25°C): A Criteria for Judgment Test Item Symbol Test Conditions Min. Max Luminous Intensity I I = 20mA LSLx0.7 ** V F Forward Voltage V I = 20mA USLx1.1 * F F ( * ) USL: Upper Standard Level, ( ** ) LSL: Lower Standard Level General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue D 08/2017 Page 6