OPF2416, OPF2416T, OPF2416TC Features:  Up to 155Mbps operation  850nm wavelength   ST style port  Wave solderable  Wide temperature range Description: The OPF2416 family is a low cost solution for high speed fiber optic communications designs. The internal lensing of this receiver’s design allows optimal response for fiber sizes of 100µm and below. The receiver is comprised of a high speed, low noise, photodiode coupled to a transimpedance amplifier (TIA). The photodiode/TIA combination produces an output voltage that is proportional to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing the photodiode close to the TIA. The amplification of the TIA makes the output much less susceptible to EMI. The output of the OPF2416 is an analog, low impedance, emitter follower voltage source. Subsequent circuitry can be utilized to convert the analog voltage to ECL/TTL for digital data rates up to 155 Mbps. The OPF2416 is  available with either standard or threaded panel mount ST receptacles. The threaded version is also available in conductive plastic. Applications:  Industrial Ethernet equipment  Copper-to-fiber media conversion  Intra-system fiber optic links  Video surveillance systems PIN FUNCTION 1 Not Connected “T” suffix = Threaded ST package 2 VOUT “TC” suffix = Threaded, conductive ST package 3 VEE 4 Not Connected 5 Not Connected 6 V CC 7 V EE 8 Not Connected Pins 3 & 7 are electrically connected to the header. RoHS ESD Class 2 ST is a registered trademark of AT&T. Pins 1,4,5 & 8 are mechanically connected together. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 08/2016 Page 1

OPF2416, OPF2416T, OPF2416TC Mechanical Data OPF2416 OPF2416T OPF2416TC DIMENSIONS ARE IN: [MILLIMETERS] INCHES General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 08/2016 Page 2

OPF2416, OPF2416T, OPF2416TC Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature Range -55° C to +85° C Operating Temperature Range -40° C to +85° C Lead Soldering Temperature(1) 260° C Supply Voltage -0.5 V to 6.0 V Output Current 25 mA Output Pin Voltage -0.5 V Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 5.3 7.0 9.6  = 850 nm, f = 50 MHz p R Responsivity mV/µW 4.5 11.5 -40 °C  T  +85 °C A 0.40 0.59 75 MHz Bandwidth Filtered, P = 0 R V RMS Output Noise Voltage mV NOISE 0.70 Unfiltered Bandwidth, P = 0 R 100 MHz Bandwidth Filtered, P RMS Equivalent Optical Noise Input Power 0.050 0.065 µW N P = 0 R 175 P Peak Received Optical Power µW -40 °C  T  +85 °C R A 150 V DC Output Voltage -4.2 -3.1 -2.4 V P = 0 ODC R I Supply Current 9 15 mA R =  EE L BW Bandwidth 125 MHz -3dB electrical f = 50 MHz, P = 100 µW peak, t, t Rise Time, Fall Time 3.3 6.3 ns R r f R = 511 , C = 5 pF L LOAD PWD Pulse Width Distortion 0.4 2.5 ns f = 50 MHz, P = 100µW R PSRR Power Supply Rejection Ratio 20 dB f = 10 MHz Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 08/2016 Page 3

OPF2416, OPF2416T, OPF2416TC Application Circuit Note that the 10Ω resistor and bypass capacitor are critical. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 08/2016 Page 4

OPF2416, OPF2416T, OPF2416TC Issue Change Description Approval Date 1.0 Initial Release (old datasheet format from December 1997) 12/1997 A Update to TTelectronics format Harry Whitford 8/9/2012 B Transferred to the new TT Electronics template 8/2016 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 08/2016 Page 5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T T Electronics: OPF2416T OPF2416 OPF2416TC