 0.125” (3.175 mm) slot width  Choice of aperture (0.050” or 0.010” width)  Choice of opaque or IR transmissive shell material  Choice of mounting configurations  Choice of lead spacing or wires The slotted optical sensors in this series provide the flexibility of a custom device from a standard product line. Building from a standard housing with a 0.125” (3.18mm) wide slot, the user can specify output logic state, output driver circuit, aperture width, aperture surface and mounting tab locations. Furthermore, an option of wire or PCB leads allows electrical interface flexibility. The device body is an opaque plastic which minimizes sensitivity to both visible and near-infrared external light sources which may impact operation. Aperture width choices provide different optical resolution for motion sensing. A covered aperture provides dust protection, while an open aperture provides maximum protection against external light sources. Phototransistor sensor devices are: OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890. The OPB355 provides a photodiode detector, which has a lower linear output-versus-light. Wide electrical output current ranges are available. LED emissions are near-infrared (850-940nm). Custom electrical, wire and cabling services are available. Contact your local representative or OPTEK for more information. Compliant to EU RoHS Directive 2002/95/EC. OPB360, OPB370, OPB380, OPB390 OPB859  Non-contact object sensing OPB355 OPB860, OPB870, OPB880, OPB890  Assembly line automation 1 3 1 3  Machine automation  Equipment safety  Machine safety 2 4 2 4 Wire Colors Color # Description 1 Red CONTAINS POLYSULFONE 2 Black To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. ND Vibra-Tite Formula 3 evaporates fast without causing structural failure in OPTEK’s molded 3 White plastics. 4 Green Applies to: OPB360, OPB370, OPB380, OPB390 and OPB860, OPB870, OPB880, OPB890. RoHS

Part Number Guide — OPB355 OPB 3 X X X Mounting Configurations: Optek Assembly L - Emitter side mounting tab only N - No mounting tabs Phototransistor Output Family P - Sensor side mounting tab only T - Two mounting tabs Part Number Guide — OPB360 / OPB370 OPB 3 X X X X X Optek Assembly Sensor Aperture: 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Phototransistor Output Family Emitter Sensor: 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Discrete Shell Material: 6 - Covered (apertures not visible), PCB leads Mounting Configurations: 7 - Open (apertures visible), PCB leads L - Emitter side mounting tab only N - No mounting tabs P - Sensor side mounting tab only T - Two mounting tabs Lead Spacer Designator: 0 = 0.320” (8.12 mm) lead space 5 = 0.220” (5.59 mm) lead space Part Number Guide — OPB380 / OPB390 OPB 3 X 0 X X X Z Optek Assembly RoHS Compliant Sensor Aperture: Phototransistor Output Family 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Emitter Sensor: Discrete Shell Material: 1 - 0.010” (0.254 mm) 8 - Covered (apertures not visible), Wires 5 - 0.050” (1.270 mm) 9 - Open (apertures visible), Wires Mounting Configurations: L - Emitter side mounting tab only N - No mounting tabs P - Sensor side mounting tab only T - Two mounting tabs

Part Number Guide — OPB859 OPB 8 5 9 Emitter Aperture: 0.050” (1.270 mm) Optek Assembly Sensor Aperture: 0.050” (1.270 mm) Mounting Configurations: Phototransistor Output Family T - Two mounting tabs Part Number Guide — OPB860 / OPB870 OPB 8 X X X X X Optek Assembly Sensor Aperture: 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Phototransistor Output Family Emitter Sensor: 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Discrete Shell Material: 6 - Covered (apertures not visible), PCB leads Mounting Configurations: 7 - Open (apertures visible), PCB leads L - Emitter side mounting tab only Electrical Specification Variations: N - No mounting tabs 0 = Electrical Parameter A (lead spacing = 0.320”) P - Sensor side mounting tab only 1 = Electrical Parameter B (lead spacing = 0.320”) 2 = Electrical Parameter C (lead spacing = 0.320”) T - Two mounting tabs 5 = Electrical Parameter A (lead spacing = 0.220”) 6 = Electrical Parameter B (lead spacing = 0.220”) 7 = Electrical Parameter C (lead spacing = 0.220”) Note: Assemblies with dual 0.010” apertures are currently available with electrical parameter “A” only. Part Number Guide — OPB880 / OPB890 OPB 8 X X X X X Z Optek Assembly RoHS Compliant Sensor Aperture: Phototransistor Output Family 1 - 0.010” (0.254 mm) 5 - 0.050” (1.270 mm) Emitter Sensor: Discrete Shell Material: 1 - 0.010” (0.254 mm) 8 - Covered (apertures not visible), Wires 5 - 0.050” (1.270 mm) 9 - Open (apertures visible), Wires Mounting Configurations: L - Emitter side mounting tab only Electrical Specification Variations: N - No mounting tabs 0 = Electrical Parameter A P - Sensor side mounting tab only 1 = Electrical Parameter B T - Two mounting tabs 2 = Electrical Parameter C NOTE: Assemblies with dual 0.010” apertures are currently available with electrical parameter “A” only. Wires = 26AWG - 24” long. UL approved.

OPB355, OPB360, OPB370 OPB380, OPB390 OPB880, OPB890 OPB859 Pin # Emitter Pin # Transistor/Diode 1 Anode 3 Collector / Anode 2 Cathode 4 Emitter / Cathode [ MILLIMETERS] DIMENSIONS ARE IN: INCHES

OPB860, OPB870

Storage Temperature(1) (2) OPB355, OPB360, OPB370, OPB859, OPB860, OPB870 Series -40° C to +100° C OPB380, OPB390, OPB880, OPB890 Series -40° C to +85° C Operating Temperature(1) (2) -40° C to +85° C Lead Soldering Temperature(7) 260° C Input LED Forward DC Current OPB355, OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890 50 mA Peak Forward Current (1µs pulse width, 300 pps) 1 A Reverse DC Voltage 2 V Power Dissipation(2) 75 mW Output Phototransistor/Diode Cathode-Anode Reverse Voltage -OPB355 60 V Collector-Emitter Voltage OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890 Series 30 V Emitter-Collector Voltage 5 V Collector DC Current 30 mA Power Dissipation(1) 100 mW Notes: (1) For wire series (OPB380, OPB390, OPB880 and OPB890), maximum storage and operating temperature is limited by the temperature rating of the lead wires. (2) Derate linearly 1.67 mW/° C above 25° C. (3) For OPB355, OPB360 and OPB370, polarity is denoted by color of housing top: LED (clear); sensor (black). (4) Cleaning agents methanol and isopropanol are recommended. Spray or wipe; do not submerge. (5) OPB380 and OPB390 wire terminations have 24” of 7-strand 26 AWG UL approved insulated wire on each terminal. These devices incorporate a wire strain relief at the housing surface. The insulation colors and functions are: IRED anode (red); IRED cathode (black); phototransistor collector (white); phototransistor emitter (green). (6) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (7) All parameters were tested using pulse technique.

Input Transistor/Diode (See OP240 for additional information—for reference only) V Forward Voltage - 1.3 1.8 V I = 20 mA F F I Reverse Current - - 100 µA V = 2 V R R Output Diode — OPB355 (See OPB950 for additional information — for reference only) V Reverse Diode Breakdown Voltage 60 - - V I = 100 µA, I = 0, E = 0 BR R F E V Forward Voltage Photodiode - - 1.2 V I = 1 mA, I = 0, E = 0 FD F F E ID Reverse Dark Current - - 60 nA V = 30 V, E = 0, I = 0 R E F Output Transistor (See OP550 for additional information—for reference only) V Collector-Emitter Breakdown Voltage 30 - - V I = 1 mA (BR)CEO C V Emitter-Collector Breakdown Voltage 5 - - V I = 100 µA (BR)ECO E I Collector-Emitter Dark Current - - 100 nA V = 10 V, I = 0, E = 0 CEO CE F E Coupled On-State Collector Current I L OPB355 (L, N, P, T) 10 - 200 µa V = 5 V, I = 40 mA R F Collector-Emitter Saturation Voltage OPB859 - - 0.4 I = 125 µA, I = 20 mA C F OPB860/870/865/875 (Para. A) - - 0.4 I = 400 µA, I = 20 mA C F OPB861/871/866/876 (Para. B) - - 0.4 I = 800 µA, I = 20 mA V C F CE(SAT) OPB862/872/867/877 (Para. C) - - 0.6 V I = 1800 µA, I = 20 mA C F OPB880/890/ (Para. A) - - 0.4 I = 400 µA, I = 20 mA C F OPB881/891 (Para. B) - - 0.4 I = 800 µA, I = 10 mA C F OPB882/892 (Para. C) - - 0.6 I = 1800 µA, I = 20 mA C F On-State Collector Current OPB36X, OPB37X (T, N, L, P 11) 1.0 - 5 OPB36X, OPB37X (T, N, L, P 51) 2.5 - 10 OPB36X, OPB37X (T, N, L, P 55) 3.5 - 14 OPB38X, OPB39X (T, N, L, P 11) 1.0 - 5 mA V = 0.4 V, I = 20 mA CE F OPB38X, OPB39X (T, N, L, P 51) 2.5 - 10 OPB38X, OPB39X (T, N, L, P 55) 3.5 - 14 I C(ON) OPB859 250 - - µA V = 10 V, I = 20 mA CE F OPB860/870/865/875 (Para. A) 0.5 - - V = 10 V, I = 20 mA CE F OPB861/871/866/876 (Para. B) 1.0 - - V = 5 V, I = 10 mA CE F OPB862/872/867/877 (Para. C) 1.8 - - V = 0.6 V, I = 20 mA CE F OPB880/890/ (Para. A) 0.5 - - V = 10 V, I = 20 mA mA CE F OPB881/891 (Para. B) 1.0 - - V = 5 V, I = 10 mA CE F OPB882/892 (Para. C) 1.8 - - V = 0.6 V, I = 20 mA CE F

OPB355 - Flag Next to Emitter OPB355 - Flag Next to Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 mA) 0.80 mA) 0.80 nse ( Right to Left nse ( Left to Right Right to Left o Left to Right o p p s s e 0.60 e 0.60 R R Typical I C (ON) 0.40 Typical I C (ON) 0.40 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB355 - Flag in Middle of Slot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m 0.80 se ( Right to Left n o Left to Right p s Re 0.60 N) Emitter O al IC ( Left to Right Right to Left c pi 0.40 y T Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches)

AperturOe PCBo3n7fi0gTu1ra1t i-o Fnl a1g1 N- Fexlatg t oN eExmt ittote Ermitter AperturOeP CBo3n7f0igTu1r1a t-i oFnla 1g1 N - eFxlat gto N Seexnt stoo rSensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m0.80 m0.80 se ( Left to Right Right to Left se ( Left to Right Right to Left n n o o p p s s Re0.60 Re0.60 N) N) O O C( C( al I al I c c pi0.40 pi0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) ApertuOreP CBo3n70fiTg1u1ra -t iFolnag 1 1in - MFildagd lien oMf iSdldolte of Slot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m 0.80 se ( Left to Right Right to Left n o p s Re 0.60 N) Emitter O C( al I Left to Right Right to Left c pi 0.40 y T Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Diisplacement Distance (inches)

ApertuOreP BC3o7n0fiNg5u1ra -t iFolna g5 1in - MFliadgd Nlee oxtf tSol oEtmitter ApertuOreP CBo3n7f0igNu5r1a t-i oFnla 5g1 N - eFxlat gto N Seexnt stoo rSensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m 0.80 m 0.80 se ( se ( Left to Right Right to Left n Left to Right Right to Left n o o p p s s Re 0.60 Re 0.60 N) N) O O C( C( al I al I c c pi 0.40 pi 0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) AperturOe PCBo3n7fi0gNu5ra1t -io Fnl a5g1 i-n F Mlaigd dinle M oidf dSlleo tof Slot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m 0.80 e ( s n Left to Right Right to Left o p s e 0.60 R Emitter N) O C( Left to Right Right to Left al I c pi 0.40 y T Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches)

ApertureO CPoBn3f8ig0uTr5a5t i-o Fnl a5g5 N- Felxatg t oN eExmt ittote Ermitter AperturOe PCBo3n8fi0gTu5r5a t-i oFnla 5g5 N - eFxlat gto N Seexnt stoo rSensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m 0.80 m 0.80 e ( e ( s s pon Left to Right Right to Left pon Left to Right Right to Left s s Re 0.60 Re 0.60 al I C(ON) al I C(ON) c c pi 0.40 pi 0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) ApertuOreP CBo3n8f0iTg5u5ra -t iFolna g5 5in - MFliadgd lien oMf iSdldolte of Slot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m e ( 0.80 s n po Left to Right Right to Left s Re 0.60 N) Emitter O al IC( Left to Right Right to Left pic 0.40 y T Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T T Electronics: OPB890T51 OPB380T51 OPB380T55 OPB390L11 OPB390L51 OPB390L55 OPB390N11 OPB390N51 OPB390N55 OPB390P11 OPB390P51 OPB390T11 OPB390T51 OPB390T55 OPB880T11 OPB380L11Z OPB380L51Z OPB380L55Z OPB380N11Z OPB380N51Z OPB380N55Z OPB380P11Z OPB380P51Z OPB380P55Z OPB380T11Z OPB380T51Z OPB380T55Z OPB390L11Z OPB390L51Z OPB390L55Z OPB390N11Z OPB390N51Z OPB390N55Z OPB390P11Z OPB390P51Z OPB390P55Z OPB390T11Z OPB390T51Z OPB390T55Z OPB880L11Z OPB880L51Z OPB880L55Z OPB880N11Z OPB880N51Z OPB880N55Z OPB880P11Z OPB880P51Z OPB880P55Z OPB880T11Z OPB880T55Z OPB881L51Z OPB881L55Z OPB881N51Z OPB881N55Z OPB881P51Z OPB881P55Z OPB881T51Z OPB881T55Z OPB882L51Z OPB882L55Z OPB882N51Z OPB882N55Z OPB882P51Z OPB882P55Z OPB882T51Z OPB882T55Z OPB890L11Z OPB890L51Z OPB890L55Z OPB890N11Z OPB890N51Z OPB890N55Z OPB890P11Z OPB890P51Z OPB890P55Z OPB890T11Z OPB890T51Z OPB890T55Z OPB891L51Z OPB891L55Z OPB891N51Z OPB891N55Z OPB891P51Z OPB891P55Z OPB891T51Z OPB891T55Z OPB892L51Z OPB892L55Z OPB892N51Z OPB892N55Z OPB892P51Z OPB892P55Z OPB892T51Z OPB892T55Z OPB865P11 OPB885Z OPB370N55 OPB355L OPB355N OPB355P