Wide Gap Slotted Optical Switch OPB800 (L and W Series) W Package Features:  0.375” (9.525 mm) wide gap  Choice of aperture size  Choice of minimum photocurrent  Choice of opaque or IR transmissive shells L Package  Available for PCBoard mounting or with 24” 26 AWG wires Description: The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a standard product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire interconnect. Building from a standard housing that utilizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output parameters, discrete shell material and the aperture width. Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to visible and near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). Applications:  Non-contact interruptive object sensing  Assembly line automation  Machine automation  Equipment security  Machine safety Part Number Guide OPB 8 X X X X X Z For “W” series only Optek Assembly Sensor Aperture: 1 — 0.010” (.254 mm) 5 — 0.050” (1.270 mm) Phototransistor Output Family Emitter Aperture: 5 — 0.050” (1.270 mm) Discrete Shell Material: Mounting configurations: 0 — Transmissive plastic L — Solder lead termination Discrete shell W — Wire termination 1 — Opaque plastic Electrica l Specific ation Vari ations: Discrete shell 0 = Electr ical Param eter A 1 = Electrical Parameter B 2 = Electrical Parameter C Note: As semblies w ith 0.010” apertures are currently available with electrical parameter “A” only. Wires = 26AWG—24” Long General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 11/2016 Page 1

Wide Gap Slotted Optical Switch Electrical Specifications Absolute Maximum Ratings (T =25°C unless otherwise noted) A Storage and Operating Temperature L Series -40° C to +85° C W Series -40° C to +80° C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2) 260° C Input Diode Forward DC Current 50 mA Peak Forward Current (1 µs pulse width, 300 pps) 3 A Reverse DC Voltage 2 V Power Dissipation(1) 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V Collector DC Current 30 mA Power Dissipation(1) 100 mW 1 3 Color/Pin # Description Red-1 Anode Black-2 Cathode White-3 Collector Green-4 Emitter 2 4 General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 11/2016 Page 2

Wide Gap Slotted Optical Switch Electrical Characteristics (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode V Forward Voltage - - 1.7 V I = 20 mA F F I Reverse Current - - 100 µA V = 2 V R R Output Phototransistor V Collector-Emitter Breakdown Voltage 30 - - V I = 1 mA (BR)CEO C V Emitter-Collector Breakdown Voltage 5 - - V I = 100 µA (BR)ECO E I Collector-Emitter Dark Current - - 100 nA V = 10 V CEO CE Combined Collector-Emitter Saturation Voltage Parameter A (OPB800,OPB810) - - 0.4 V I = 250 µA, I = 20 mA V C F CE(SAT) Parameter B (OPB801,OPB811) - - 0.4 V I = 500 µA, I = 10 mA C F Parameter C (OPB802,OPB812) - - 0.6 V I = 1800 µA, I = 20 mA C F On-State Collector Current Parameter A (OPB800,OPB810) 0.625 - - V = 10 V, I = 20 mA I CE F C(ON) Parameter B (OPB801,OPB811) 1.25 - - mA V = 5 V, I = 10 mA CE F Parameter C (OPB802,OPB812) 2.25 - - V = 0.6 V, I = 20 mA CE F Notes: (1) Derate linearly 1.67 mW/° C above 25° C. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) All parameters tested using pulse technique. (4) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. (5) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black), phototransistor collector (white) and phototransistor emitter (green). General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 11/2016 Page 3

Wide Gap Slotted Optical Switch OPB800_51 - Flag Next to Emitter OPB800_51 - Flag Next to Sensor 1.2 1.2 Top to Bottom Top to 1.0 1.0 e e s s on 0.8 on 0.8 p p s s e e RN) Left to Right Right to Left RN) Left to Right Right to Left C(O0.6 C(O 0.6 d I d I e e z z ali ali m 0.4 m 0.4 or Right to Left or Right to Left N N Left to Right Left to Right Top to Bottom Top to Bottom 0.2 0.2 0.0 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Distance (inches) Displacement Distance (inches) OPB800_51 - Flag in Middle of Slot 1.2 Top to 1.0 Top to Bottom 0 e s n 0.8 o p s Left to Right Right to Left e R N) C(O0.6 ed I Emitter z mali Left to Right Right to Left 0.4 or Right to Left N Left to Right Sensor Top to Bottom 0.2 0 Width 0.0 0.00 0.05 0.10 0.15 0.20 0.25 Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 11/2016 Page 4

Wide Gap Slotted Optical Switch OPB800_55 - Flag Next to Emitter OPB800_55 - Flag Next to Sensor 1.2 1.2 Top to Top to 1.0 1.0 e s e n s Respo 0.8 Left to Right Right to Left Respon0.8 Left to Right Right to Left N) N) C(O0.6 C(O0.6 d I d I e e z z ali ali m 0.4 m0.4 Nor Right to Left Nor Right to Left Left to Right Left to Right Top to Bottom Top to Bottom 0.2 0.2 0.0 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Distance (inches) Distance (inches) OPB800_55 - Flag in Middle of Slot 1.2 Top to 1.0 Top to Bottom 0 A) m e ( 0.8 s n o Left to Right Right to Left p s Re 0.6 ON) Emitter C( al I Left to Right Right to Left c 0.4 ypi Right to Left T Left to Right Top to Bottom Sensor 0.2 0 Width 0.0 0.00 0.05 0.10 0.15 0.20 0.25 Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue B 11/2016 Page 5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T T Electronics: OPB800W51 OPB800W55 OPB801W55 OPB802W55 OPB800W51Z OPB800W55Z OPB801W55Z OPB802W55Z OPB800L51 OPB800L55 OPB801L55 OPB802L55