ICGOO在线商城 > 传感器,变送器 > 光学传感器 - 光电二极管 > OP950
数量阶梯 | 香港交货 | 国内含税 |
+xxxx | $xxxx | ¥xxxx |
查看当月历史价格
查看今年历史价格
OP950产品简介:
ICGOO电子元器件商城为您提供OP950由OPTEK设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 OP950价格参考¥5.38-¥7.51。OPTEKOP950封装/规格:光学传感器 - 光电二极管, Photodiode 935nm 5ns 。您可以下载OP950参考资料、Datasheet数据手册功能说明书,资料中有OP950 详细功能的应用电路图电压和使用方法及教程。
参数 | 数值 |
产品目录 | |
描述 | PHOTODIODE PIN 935NM SIDELOOK光电二极管 Photodiode |
产品分类 | |
品牌 | TT Electronics/Optek Technology |
产品手册 | |
产品图片 | |
rohs | 符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求 |
产品系列 | 光电二极管,Optek / TT Electronics OP950- |
数据手册 | |
产品型号 | OP950 |
PCN组件/产地 | |
上升时间 | 5 ns |
下降时间 | 5 ns |
不同nm时的响应度 | - |
二极管类型 | 引脚 |
产品 | PIN Photodiodes |
产品目录页面 | |
产品种类 | 光电二极管 |
光电流 | 18 uA |
其它名称 | 365-1085 |
功率耗散 | 100 mW |
反向电压 | 60 V |
响应时间 | 5ns |
商标 | Optek / TT Electronics |
安装风格 | Through Hole |
封装 | Bulk |
封装/外壳 | 侧视图 |
封装/箱体 | Side Looker |
峰值波长 | 850 nm |
工作温度 | -40°C ~ 100°C |
工厂包装数量 | 100 |
暗电流 | 1 nA |
最大工作温度 | + 100 C |
最大暗电流 | 60 nA |
最小工作温度 | - 40 C |
有效面积 | - |
标准包装 | 100 |
正向电流 | 1 mA |
波长 | 935nm |
电压-DC反向(Vr)(最大值) | 60V |
电流-暗(典型值) | 1nA |
视角 | - |
频谱范围 | 500nm ~ 1100nm |
颜色-增强 | - |
PIN Silicon Photodiode OP950 Series OP950 OP954 OP955 Features: • Epoxy package • Linear response vs. irradiance • Fast switching (cid:415)me • Choice of wide or extra wide receiving angle • Side-looker package • Small package style ideal for space-limited applica(cid:415)ons Description: Each OP950, OP954 and OP955 device consists of a PIN silicon photodiode molded in an epoxy packge that allows spectral response from visible to infrared light wavelengths. The side-looking package is designed for easy PCBoard moun(cid:415)ng and space-limited applica(cid:415)ons. The OP950 has a 95° wide receiving angle that provides rela(cid:415)vely even recep(cid:415)on over a large area and is mechanically and spectrally matched to OPTEK’s GaAs and GaAiAs series of infrared emi(cid:427)ng diodes. The OP954 has a 128° very wide receiving angle that provides rela(cid:415)vely even recep(cid:415)on over a large area. The OP955 has a 95° wide receiving angle with a recessed lens, which allows an acceptance half-angle of 45° when measured from the op(cid:415)cal axis to the half power point. Both OP954 and OP955 components are 100% produc(cid:415)on tested, using infrared light for close correla(cid:415)on with OPTEK’s GaAs and GaAIAs emi(cid:425)ers. Please refer to Applica(cid:415)on Bulle(cid:415)ns 208 and 210 for addi(cid:415)onal design informa(cid:415)on and reliability (degrada(cid:415)on) data. Applications: Ordering Informa(cid:415)on • Non-contact reflec(cid:415)ve object sensor Part Number Sensor Viewing Angle Lead Length • Assembly line automa(cid:415)on OP950 95° • Machine automa(cid:415)on OP954 Photodiode 128° 50” • Machine safety OP955 95° • End of travel sensor • Door sensor RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 08/2016 Page 1
PIN Silicon Photodiode OP950 Series OP950 Sidelooker Lens OP950 1 DIMENSIONS ARE IN: [MILLIMETERS] INCHES Pin # Diode 2 1 Anode 2 Cathode OP954 Sidelooker Lens OP954 1 DIMENSIONS ARE IN: [MILLIMETERS] INCHES 2 Pin # Diode 1 Cathode 2 Anode OP954 - CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plas(cid:415)cs. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 08/2016 Page 2
PIN Silicon Photodiode OP950 Series OP955 Sidelooker Recessed Lens OP955 1 DIMENSIONS ARE IN: I[NMCILHLEIMSETERS] 2 Pin # Diode 1 Cathode 2 Anode OP955 - CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plas(cid:415)cs. General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 08/2016 Page 3
PIN Silicon Photodiode OP950 Series Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Reverse Breakdown Voltage 60 V Storage & Opera(cid:415)ng Temperature Range -40° C to +100° C Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 sec. with soldering iron] 260° C(1) Reverse Breakdown Voltage 60 V Power Dissipa(cid:415)on 100 mW(2) Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Reverse Light Current I OP950, OP955 8 - 18 µA V = 5 V, E = 1 mW/cm2 (3) L R E OP954 3.5 - 8 I Reverse Dark Current - 1 60 nA V = 30 V, E = 0(4) D R E V Reverse Breakdown Voltage 60 - - V I = 100 μA (BR) R V Forward Voltage - - 1.2 V I = 1 mA F F C Total Capacitance - 4 - pF V = 20 V, E = 0, f = 1.0 MHz T R E t Rise Time - 5 - r ns V = 20 V, λ = 850 nm, R = 50 Ω R L t Fall Time - 5 - f Notes: (1) RMA flux is recommended. Dura(cid:415)on can be extended to 10 seconds maximum when flow soldering. A maximum of 20 grams force may be applied to leads when soldering. (2) Derate linearly 1.67 mW/° C above 25° C. (3) The light source is an unfiltered GaAs LED with a peak emission wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the en(cid:415)re lens surface of the photodiode being tested. (4) Calculate the typical dark current in nA using the formula I = 10(0.042T -1.5) where T is ambient temperature in °C. D A A General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 08/2016 Page 4
PIN Silicon Photodiode OP950 Series Performance OP950 Series General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 08/2016 Page 5
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T T Electronics: OP950 OP954 OP955